drivers/ssb/scan.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Bus scanning
   4  *
   5  * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
   6  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
   7  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
   8  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9  * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10  * Copyright (C) 2006 Broadcom Corporation.
  11  *
  12  * Licensed under the GNU/GPL. See COPYING for details.
  13  */
  14
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/pci.h>
  18 #include <linux/io.h>
  19
  20 #include <pcmcia/cistpl.h>
  21 #include <pcmcia/ds.h>
  22
  23 #include "ssb_private.h"
  24
  25
  26 const char *ssb_core_name(u16 coreid)
  27 {
  28         switch (coreid) {
  29         case SSB_DEV_CHIPCOMMON:
  30                 return "ChipCommon";
  31         case SSB_DEV_ILINE20:
  32                 return "ILine 20";
  33         case SSB_DEV_SDRAM:
  34                 return "SDRAM";
  35         case SSB_DEV_PCI:
  36                 return "PCI";
  37         case SSB_DEV_MIPS:
  38                 return "MIPS";
  39         case SSB_DEV_ETHERNET:
  40                 return "Fast Ethernet";
  41         case SSB_DEV_V90:
  42                 return "V90";
  43         case SSB_DEV_USB11_HOSTDEV:
  44                 return "USB 1.1 Hostdev";
  45         case SSB_DEV_ADSL:
  46                 return "ADSL";
  47         case SSB_DEV_ILINE100:
  48                 return "ILine 100";
  49         case SSB_DEV_IPSEC:
  50                 return "IPSEC";
  51         case SSB_DEV_PCMCIA:
  52                 return "PCMCIA";
  53         case SSB_DEV_INTERNAL_MEM:
  54                 return "Internal Memory";
  55         case SSB_DEV_MEMC_SDRAM:
  56                 return "MEMC SDRAM";
  57         case SSB_DEV_EXTIF:
  58                 return "EXTIF";
  59         case SSB_DEV_80211:
  60                 return "IEEE 802.11";
  61         case SSB_DEV_MIPS_3302:
  62                 return "MIPS 3302";
  63         case SSB_DEV_USB11_HOST:
  64                 return "USB 1.1 Host";
  65         case SSB_DEV_USB11_DEV:
  66                 return "USB 1.1 Device";
  67         case SSB_DEV_USB20_HOST:
  68                 return "USB 2.0 Host";
  69         case SSB_DEV_USB20_DEV:
  70                 return "USB 2.0 Device";
  71         case SSB_DEV_SDIO_HOST:
  72                 return "SDIO Host";
  73         case SSB_DEV_ROBOSWITCH:
  74                 return "Roboswitch";
  75         case SSB_DEV_PARA_ATA:
  76                 return "PATA";
  77         case SSB_DEV_SATA_XORDMA:
  78                 return "SATA XOR-DMA";
  79         case SSB_DEV_ETHERNET_GBIT:
  80                 return "GBit Ethernet";
  81         case SSB_DEV_PCIE:
  82                 return "PCI-E";
  83         case SSB_DEV_MIMO_PHY:
  84                 return "MIMO PHY";
  85         case SSB_DEV_SRAM_CTRLR:
  86                 return "SRAM Controller";
  87         case SSB_DEV_MINI_MACPHY:
  88                 return "Mini MACPHY";
  89         case SSB_DEV_ARM_1176:
  90                 return "ARM 1176";
  91         case SSB_DEV_ARM_7TDMI:
  92                 return "ARM 7TDMI";
  93         }
  94         return "UNKNOWN";
  95 }
  96
  97 static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
  98 {
  99         u16 chipid_fallback = 0;
 100
 101         switch (pci_dev->device) {
 102         case 0x4301:
 103                 chipid_fallback = 0x4301;
 104                 break;
 105         case 0x4305 ... 0x4307:
 106                 chipid_fallback = 0x4307;
 107                 break;
 108         case 0x4403:
 109                 chipid_fallback = 0x4402;
 110                 break;
 111         case 0x4610 ... 0x4615:
 112                 chipid_fallback = 0x4610;
 113                 break;
 114         case 0x4710 ... 0x4715:
 115                 chipid_fallback = 0x4710;
 116                 break;
 117         case 0x4320 ... 0x4325:
 118                 chipid_fallback = 0x4309;
 119                 break;
 120         case PCI_DEVICE_ID_BCM4401:
 121         case PCI_DEVICE_ID_BCM4401B0:
 122         case PCI_DEVICE_ID_BCM4401B1:
 123                 chipid_fallback = 0x4401;
 124                 break;
 125         default:
 126                 ssb_printk(KERN_ERR PFX
 127                            "PCI-ID not in fallback list\n");
 128         }
 129
 130         return chipid_fallback;
 131 }
 132
 133 static u8 chipid_to_nrcores(u16 chipid)
 134 {
 135         switch (chipid) {
 136         case 0x5365:
 137                 return 7;
 138         case 0x4306:
 139                 return 6;
 140         case 0x4310:
 141                 return 8;
 142         case 0x4307:
 143         case 0x4301:
 144                 return 5;
 145         case 0x4401:
 146         case 0x4402:
 147                 return 3;
 148         case 0x4710:
 149         case 0x4610:
 150         case 0x4704:
 151                 return 9;
 152         default:
 153                 ssb_printk(KERN_ERR PFX
 154                            "CHIPID not in nrcores fallback list\n");
 155         }
 156
 157         return 1;
 158 }
 159
 160 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
 161                        u16 offset)
 162 {
 163         u32 lo, hi;
 164
 165         switch (bus->bustype) {
 166         case SSB_BUSTYPE_SSB:
 167                 offset += current_coreidx * SSB_CORE_SIZE;
 168                 break;
 169         case SSB_BUSTYPE_PCI:
 170                 break;
 171         case SSB_BUSTYPE_PCMCIA:
 172                 if (offset >= 0x800) {
 173                         ssb_pcmcia_switch_segment(bus, 1);
 174                         offset -= 0x800;
 175                 } else
 176                         ssb_pcmcia_switch_segment(bus, 0);
 177                 lo = readw(bus->mmio + offset);
 178                 hi = readw(bus->mmio + offset + 2);
 179                 return lo | (hi << 16);
 180         case SSB_BUSTYPE_SDIO:
 181                 offset += current_coreidx * SSB_CORE_SIZE;
 182                 return ssb_sdio_scan_read32(bus, offset);
 183         }
 184         return readl(bus->mmio + offset);
 185 }
 186
 187 static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
 188 {
 189         switch (bus->bustype) {
 190         case SSB_BUSTYPE_SSB:
 191                 break;
 192         case SSB_BUSTYPE_PCI:
 193                 return ssb_pci_switch_coreidx(bus, coreidx);
 194         case SSB_BUSTYPE_PCMCIA:
 195                 return ssb_pcmcia_switch_coreidx(bus, coreidx);
 196         case SSB_BUSTYPE_SDIO:
 197                 return ssb_sdio_scan_switch_coreidx(bus, coreidx);
 198         }
 199         return 0;
 200 }
 201
 202 void ssb_iounmap(struct ssb_bus *bus)
 203 {
 204         switch (bus->bustype) {
 205         case SSB_BUSTYPE_SSB:
 206         case SSB_BUSTYPE_PCMCIA:
 207                 iounmap(bus->mmio);
 208                 break;
 209         case SSB_BUSTYPE_PCI:
 210 #ifdef CONFIG_SSB_PCIHOST
 211                 pci_iounmap(bus->host_pci, bus->mmio);
 212 #else
 213                 SSB_BUG_ON(1); /* Can't reach this code. */
 214 #endif
 215                 break;
 216         case SSB_BUSTYPE_SDIO:
 217                 break;
 218         }
 219         bus->mmio = NULL;
 220         bus->mapped_device = NULL;
 221 }
 222
 223 static void __iomem *ssb_ioremap(struct ssb_bus *bus,
 224                                  unsigned long baseaddr)
 225 {
 226         void __iomem *mmio = NULL;
 227
 228         switch (bus->bustype) {
 229         case SSB_BUSTYPE_SSB:
 230                 /* Only map the first core for now. */
 231                 /* fallthrough... */
 232         case SSB_BUSTYPE_PCMCIA:
 233                 mmio = ioremap(baseaddr, SSB_CORE_SIZE);
 234                 break;
 235         case SSB_BUSTYPE_PCI:
 236 #ifdef CONFIG_SSB_PCIHOST
 237                 mmio = pci_iomap(bus->host_pci, 0, ~0UL);
 238 #else
 239                 SSB_BUG_ON(1); /* Can't reach this code. */
 240 #endif
 241                 break;
 242         case SSB_BUSTYPE_SDIO:
 243                 /* Nothing to ioremap in the SDIO case, just fake it */
 244                 mmio = (void __iomem *)baseaddr;
 245                 break;
 246         }
 247
 248         return mmio;
 249 }
 250
 251 static int we_support_multiple_80211_cores(struct ssb_bus *bus)
 252 {
 253         /* More than one 802.11 core is only supported by special chips.
 254          * There are chips with two 802.11 cores, but with dangling
 255          * pins on the second core. Be careful and reject them here.
 256          */
 257
 258 #ifdef CONFIG_SSB_PCIHOST
 259         if (bus->bustype == SSB_BUSTYPE_PCI) {
 260                 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
 261                     bus->host_pci->device == 0x4324)
 262                         return 1;
 263         }
 264 #endif /* CONFIG_SSB_PCIHOST */
 265         return 0;
 266 }
 267
 268 int ssb_bus_scan(struct ssb_bus *bus,
 269                  unsigned long baseaddr)
 270 {
 271         int err = -ENOMEM;
 272         void __iomem *mmio;
 273         u32 idhi, cc, rev, tmp;
 274         int dev_i, i;
 275         struct ssb_device *dev;
 276         int nr_80211_cores = 0;
 277
 278         mmio = ssb_ioremap(bus, baseaddr);
 279         if (!mmio)
 280                 goto out;
 281         bus->mmio = mmio;
 282
 283         err = scan_switchcore(bus, 0); /* Switch to first core */
 284         if (err)
 285                 goto err_unmap;
 286
 287         idhi = scan_read32(bus, 0, SSB_IDHIGH);
 288         cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
 289         rev = (idhi & SSB_IDHIGH_RCLO);
 290         rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
 291
 292         bus->nr_devices = 0;
 293         if (cc == SSB_DEV_CHIPCOMMON) {
 294                 tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID);
 295
 296                 bus->chip_id = (tmp & SSB_CHIPCO_IDMASK);
 297                 bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >>
 298                                 SSB_CHIPCO_REVSHIFT;
 299                 bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >>
 300                                     SSB_CHIPCO_PACKSHIFT;
 301                 if (rev >= 4) {
 302                         bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >>
 303                                           SSB_CHIPCO_NRCORESSHIFT;
 304                 }
 305                 tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP);
 306                 bus->chipco.capabilities = tmp;
 307         } else {
 308                 if (bus->bustype == SSB_BUSTYPE_PCI) {
 309                         bus->chip_id = pcidev_to_chipid(bus->host_pci);
 310                         pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
 311                                              &bus->chip_rev);
 312                         bus->chip_package = 0;
 313                 } else {
 314                         bus->chip_id = 0x4710;
 315                         bus->chip_rev = 0;
 316                         bus->chip_package = 0;
 317                 }
 318         }
 319         if (!bus->nr_devices)
 320                 bus->nr_devices = chipid_to_nrcores(bus->chip_id);
 321         if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
 322                 ssb_printk(KERN_ERR PFX
 323                            "More than %d ssb cores found (%d)\n",
 324                            SSB_MAX_NR_CORES, bus->nr_devices);
 325                 goto err_unmap;
 326         }
 327         if (bus->bustype == SSB_BUSTYPE_SSB) {
 328                 /* Now that we know the number of cores,
 329                  * remap the whole IO space for all cores.
 330                  */
 331                 err = -ENOMEM;
 332                 iounmap(mmio);
 333                 mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices);
 334                 if (!mmio)
 335                         goto out;
 336                 bus->mmio = mmio;
 337         }
 338
 339         /* Fetch basic information about each core/device */
 340         for (i = 0, dev_i = 0; i < bus->nr_devices; i++) {
 341                 err = scan_switchcore(bus, i);
 342                 if (err)
 343                         goto err_unmap;
 344                 dev = &(bus->devices[dev_i]);
 345
 346                 idhi = scan_read32(bus, i, SSB_IDHIGH);
 347                 dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
 348                 dev->id.revision = (idhi & SSB_IDHIGH_RCLO);
 349                 dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
 350                 dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT;
 351                 dev->core_index = i;
 352                 dev->bus = bus;
 353                 dev->ops = bus->ops;
 354
 355                 printk(KERN_DEBUG PFX
 356                             "Core %d found: %s "
 357                             "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
 358                             i, ssb_core_name(dev->id.coreid),
 359                             dev->id.coreid, dev->id.revision, dev->id.vendor);
 360
 361                 switch (dev->id.coreid) {
 362                 case SSB_DEV_80211:
 363                         nr_80211_cores++;
 364                         if (nr_80211_cores > 1) {
 365                                 if (!we_support_multiple_80211_cores(bus)) {
 366                                         ssb_dprintk(KERN_INFO PFX "Ignoring additional "
 367                                                     "802.11 core\n");
 368                                         continue;
 369                                 }
 370                         }
 371                         break;
 372                 case SSB_DEV_EXTIF:
 373 #ifdef CONFIG_SSB_DRIVER_EXTIF
 374                         if (bus->extif.dev) {
 375                                 ssb_printk(KERN_WARNING PFX
 376                                            "WARNING: Multiple EXTIFs found\n");
 377                                 break;
 378                         }
 379                         bus->extif.dev = dev;
 380 #endif /* CONFIG_SSB_DRIVER_EXTIF */
 381                         break;
 382                 case SSB_DEV_CHIPCOMMON:
 383                         if (bus->chipco.dev) {
 384                                 ssb_printk(KERN_WARNING PFX
 385                                            "WARNING: Multiple ChipCommon found\n");
 386                                 break;
 387                         }
 388                         bus->chipco.dev = dev;
 389                         break;
 390                 case SSB_DEV_MIPS:
 391                 case SSB_DEV_MIPS_3302:
 392 #ifdef CONFIG_SSB_DRIVER_MIPS
 393                         if (bus->mipscore.dev) {
 394                                 ssb_printk(KERN_WARNING PFX
 395                                            "WARNING: Multiple MIPS cores found\n");
 396                                 break;
 397                         }
 398                         bus->mipscore.dev = dev;
 399 #endif /* CONFIG_SSB_DRIVER_MIPS */
 400                         break;
 401                 case SSB_DEV_PCI:
 402                 case SSB_DEV_PCIE:
 403 #ifdef CONFIG_SSB_DRIVER_PCICORE
 404                         if (bus->bustype == SSB_BUSTYPE_PCI) {
 405                                 /* Ignore PCI cores on PCI-E cards.
 406                                  * Ignore PCI-E cores on PCI cards. */
 407                                 if (dev->id.coreid == SSB_DEV_PCI) {
 408                                         if (pci_is_pcie(bus->host_pci))
 409                                                 continue;
 410                                 } else {
 411                                         if (!pci_is_pcie(bus->host_pci))
 412                                                 continue;
 413                                 }
 414                         }
 415                         if (bus->pcicore.dev) {
 416                                 ssb_printk(KERN_WARNING PFX
 417                                            "WARNING: Multiple PCI(E) cores found\n");
 418                                 break;
 419                         }
 420                         bus->pcicore.dev = dev;
 421 #endif /* CONFIG_SSB_DRIVER_PCICORE */
 422                         break;
 423                 case SSB_DEV_ETHERNET:
 424                         if (bus->bustype == SSB_BUSTYPE_PCI) {
 425                                 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
 426                                     (bus->host_pci->device & 0xFF00) == 0x4300) {
 427                                         /* This is a dangling ethernet core on a
 428                                          * wireless device. Ignore it. */
 429                                         continue;
 430                                 }
 431                         }
 432                         break;
 433                 default:
 434                         break;
 435                 }
 436
 437                 dev_i++;
 438         }
 439         bus->nr_devices = dev_i;
 440
 441         err = 0;
 442 out:
 443         return err;
 444 err_unmap:
 445         ssb_iounmap(bus);
 446         goto out;
 447 }