gma500: The MID devices have the register offset different
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-omap.c
blobde0dd7b1f146e0e7fff07bd30487b1da9add0ca1
1 /*
2 * TI OMAP1 Real Time Clock interface for Linux
4 * Copyright (C) 2003 MontaVista Software, Inc.
5 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
7 * Copyright (C) 2006 David Brownell (new RTC framework)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/ioport.h>
19 #include <linux/delay.h>
20 #include <linux/rtc.h>
21 #include <linux/bcd.h>
22 #include <linux/platform_device.h>
24 #include <asm/io.h>
27 /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
28 * with century-range alarm matching, driven by the 32kHz clock.
30 * The main user-visible ways it differs from PC RTCs are by omitting
31 * "don't care" alarm fields and sub-second periodic IRQs, and having
32 * an autoadjust mechanism to calibrate to the true oscillator rate.
34 * Board-specific wiring options include using split power mode with
35 * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
36 * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
37 * low power modes) for OMAP1 boards (OMAP-L138 has this built into
38 * the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
41 #define OMAP_RTC_BASE 0xfffb4800
43 /* RTC registers */
44 #define OMAP_RTC_SECONDS_REG 0x00
45 #define OMAP_RTC_MINUTES_REG 0x04
46 #define OMAP_RTC_HOURS_REG 0x08
47 #define OMAP_RTC_DAYS_REG 0x0C
48 #define OMAP_RTC_MONTHS_REG 0x10
49 #define OMAP_RTC_YEARS_REG 0x14
50 #define OMAP_RTC_WEEKS_REG 0x18
52 #define OMAP_RTC_ALARM_SECONDS_REG 0x20
53 #define OMAP_RTC_ALARM_MINUTES_REG 0x24
54 #define OMAP_RTC_ALARM_HOURS_REG 0x28
55 #define OMAP_RTC_ALARM_DAYS_REG 0x2c
56 #define OMAP_RTC_ALARM_MONTHS_REG 0x30
57 #define OMAP_RTC_ALARM_YEARS_REG 0x34
59 #define OMAP_RTC_CTRL_REG 0x40
60 #define OMAP_RTC_STATUS_REG 0x44
61 #define OMAP_RTC_INTERRUPTS_REG 0x48
63 #define OMAP_RTC_COMP_LSB_REG 0x4c
64 #define OMAP_RTC_COMP_MSB_REG 0x50
65 #define OMAP_RTC_OSC_REG 0x54
67 /* OMAP_RTC_CTRL_REG bit fields: */
68 #define OMAP_RTC_CTRL_SPLIT (1<<7)
69 #define OMAP_RTC_CTRL_DISABLE (1<<6)
70 #define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5)
71 #define OMAP_RTC_CTRL_TEST (1<<4)
72 #define OMAP_RTC_CTRL_MODE_12_24 (1<<3)
73 #define OMAP_RTC_CTRL_AUTO_COMP (1<<2)
74 #define OMAP_RTC_CTRL_ROUND_30S (1<<1)
75 #define OMAP_RTC_CTRL_STOP (1<<0)
77 /* OMAP_RTC_STATUS_REG bit fields: */
78 #define OMAP_RTC_STATUS_POWER_UP (1<<7)
79 #define OMAP_RTC_STATUS_ALARM (1<<6)
80 #define OMAP_RTC_STATUS_1D_EVENT (1<<5)
81 #define OMAP_RTC_STATUS_1H_EVENT (1<<4)
82 #define OMAP_RTC_STATUS_1M_EVENT (1<<3)
83 #define OMAP_RTC_STATUS_1S_EVENT (1<<2)
84 #define OMAP_RTC_STATUS_RUN (1<<1)
85 #define OMAP_RTC_STATUS_BUSY (1<<0)
87 /* OMAP_RTC_INTERRUPTS_REG bit fields: */
88 #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
89 #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
91 static void __iomem *rtc_base;
93 #define rtc_read(addr) __raw_readb(rtc_base + (addr))
94 #define rtc_write(val, addr) __raw_writeb(val, rtc_base + (addr))
97 /* we rely on the rtc framework to handle locking (rtc->ops_lock),
98 * so the only other requirement is that register accesses which
99 * require BUSY to be clear are made with IRQs locally disabled
101 static void rtc_wait_not_busy(void)
103 int count = 0;
104 u8 status;
106 /* BUSY may stay active for 1/32768 second (~30 usec) */
107 for (count = 0; count < 50; count++) {
108 status = rtc_read(OMAP_RTC_STATUS_REG);
109 if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
110 break;
111 udelay(1);
113 /* now we have ~15 usec to read/write various registers */
116 static irqreturn_t rtc_irq(int irq, void *rtc)
118 unsigned long events = 0;
119 u8 irq_data;
121 irq_data = rtc_read(OMAP_RTC_STATUS_REG);
123 /* alarm irq? */
124 if (irq_data & OMAP_RTC_STATUS_ALARM) {
125 rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
126 events |= RTC_IRQF | RTC_AF;
129 /* 1/sec periodic/update irq? */
130 if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
131 events |= RTC_IRQF | RTC_UF;
133 rtc_update_irq(rtc, 1, events);
135 return IRQ_HANDLED;
138 static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
140 u8 reg;
142 local_irq_disable();
143 rtc_wait_not_busy();
144 reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
145 if (enabled)
146 reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
147 else
148 reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
149 rtc_wait_not_busy();
150 rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
151 local_irq_enable();
153 return 0;
156 /* this hardware doesn't support "don't care" alarm fields */
157 static int tm2bcd(struct rtc_time *tm)
159 if (rtc_valid_tm(tm) != 0)
160 return -EINVAL;
162 tm->tm_sec = bin2bcd(tm->tm_sec);
163 tm->tm_min = bin2bcd(tm->tm_min);
164 tm->tm_hour = bin2bcd(tm->tm_hour);
165 tm->tm_mday = bin2bcd(tm->tm_mday);
167 tm->tm_mon = bin2bcd(tm->tm_mon + 1);
169 /* epoch == 1900 */
170 if (tm->tm_year < 100 || tm->tm_year > 199)
171 return -EINVAL;
172 tm->tm_year = bin2bcd(tm->tm_year - 100);
174 return 0;
177 static void bcd2tm(struct rtc_time *tm)
179 tm->tm_sec = bcd2bin(tm->tm_sec);
180 tm->tm_min = bcd2bin(tm->tm_min);
181 tm->tm_hour = bcd2bin(tm->tm_hour);
182 tm->tm_mday = bcd2bin(tm->tm_mday);
183 tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
184 /* epoch == 1900 */
185 tm->tm_year = bcd2bin(tm->tm_year) + 100;
189 static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
191 /* we don't report wday/yday/isdst ... */
192 local_irq_disable();
193 rtc_wait_not_busy();
195 tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
196 tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
197 tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
198 tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
199 tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
200 tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);
202 local_irq_enable();
204 bcd2tm(tm);
205 return 0;
208 static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
210 if (tm2bcd(tm) < 0)
211 return -EINVAL;
212 local_irq_disable();
213 rtc_wait_not_busy();
215 rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
216 rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
217 rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
218 rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
219 rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
220 rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);
222 local_irq_enable();
224 return 0;
227 static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
229 local_irq_disable();
230 rtc_wait_not_busy();
232 alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
233 alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
234 alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
235 alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
236 alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
237 alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);
239 local_irq_enable();
241 bcd2tm(&alm->time);
242 alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
243 & OMAP_RTC_INTERRUPTS_IT_ALARM);
245 return 0;
248 static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
250 u8 reg;
252 if (tm2bcd(&alm->time) < 0)
253 return -EINVAL;
255 local_irq_disable();
256 rtc_wait_not_busy();
258 rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
259 rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
260 rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
261 rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
262 rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
263 rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
265 reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
266 if (alm->enabled)
267 reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
268 else
269 reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
270 rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
272 local_irq_enable();
274 return 0;
277 static struct rtc_class_ops omap_rtc_ops = {
278 .read_time = omap_rtc_read_time,
279 .set_time = omap_rtc_set_time,
280 .read_alarm = omap_rtc_read_alarm,
281 .set_alarm = omap_rtc_set_alarm,
282 .alarm_irq_enable = omap_rtc_alarm_irq_enable,
285 static int omap_rtc_alarm;
286 static int omap_rtc_timer;
288 static int __init omap_rtc_probe(struct platform_device *pdev)
290 struct resource *res, *mem;
291 struct rtc_device *rtc;
292 u8 reg, new_ctrl;
294 omap_rtc_timer = platform_get_irq(pdev, 0);
295 if (omap_rtc_timer <= 0) {
296 pr_debug("%s: no update irq?\n", pdev->name);
297 return -ENOENT;
300 omap_rtc_alarm = platform_get_irq(pdev, 1);
301 if (omap_rtc_alarm <= 0) {
302 pr_debug("%s: no alarm irq?\n", pdev->name);
303 return -ENOENT;
306 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
307 if (!res) {
308 pr_debug("%s: RTC resource data missing\n", pdev->name);
309 return -ENOENT;
312 mem = request_mem_region(res->start, resource_size(res), pdev->name);
313 if (!mem) {
314 pr_debug("%s: RTC registers at %08x are not free\n",
315 pdev->name, res->start);
316 return -EBUSY;
319 rtc_base = ioremap(res->start, resource_size(res));
320 if (!rtc_base) {
321 pr_debug("%s: RTC registers can't be mapped\n", pdev->name);
322 goto fail;
325 rtc = rtc_device_register(pdev->name, &pdev->dev,
326 &omap_rtc_ops, THIS_MODULE);
327 if (IS_ERR(rtc)) {
328 pr_debug("%s: can't register RTC device, err %ld\n",
329 pdev->name, PTR_ERR(rtc));
330 goto fail0;
332 platform_set_drvdata(pdev, rtc);
333 dev_set_drvdata(&rtc->dev, mem);
335 /* clear pending irqs, and set 1/second periodic,
336 * which we'll use instead of update irqs
338 rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
340 /* clear old status */
341 reg = rtc_read(OMAP_RTC_STATUS_REG);
342 if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
343 pr_info("%s: RTC power up reset detected\n",
344 pdev->name);
345 rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
347 if (reg & (u8) OMAP_RTC_STATUS_ALARM)
348 rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
350 /* handle periodic and alarm irqs */
351 if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED,
352 dev_name(&rtc->dev), rtc)) {
353 pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
354 pdev->name, omap_rtc_timer);
355 goto fail1;
357 if ((omap_rtc_timer != omap_rtc_alarm) &&
358 (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
359 dev_name(&rtc->dev), rtc))) {
360 pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
361 pdev->name, omap_rtc_alarm);
362 goto fail2;
365 /* On boards with split power, RTC_ON_NOFF won't reset the RTC */
366 reg = rtc_read(OMAP_RTC_CTRL_REG);
367 if (reg & (u8) OMAP_RTC_CTRL_STOP)
368 pr_info("%s: already running\n", pdev->name);
370 /* force to 24 hour mode */
371 new_ctrl = reg & ~(OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
372 new_ctrl |= OMAP_RTC_CTRL_STOP;
374 /* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
376 * - Device wake-up capability setting should come through chip
377 * init logic. OMAP1 boards should initialize the "wakeup capable"
378 * flag in the platform device if the board is wired right for
379 * being woken up by RTC alarm. For OMAP-L138, this capability
380 * is built into the SoC by the "Deep Sleep" capability.
382 * - Boards wired so RTC_ON_nOFF is used as the reset signal,
383 * rather than nPWRON_RESET, should forcibly enable split
384 * power mode. (Some chip errata report that RTC_CTRL_SPLIT
385 * is write-only, and always reads as zero...)
388 if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
389 pr_info("%s: split power mode\n", pdev->name);
391 if (reg != new_ctrl)
392 rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
394 return 0;
396 fail2:
397 free_irq(omap_rtc_timer, NULL);
398 fail1:
399 rtc_device_unregister(rtc);
400 fail0:
401 iounmap(rtc_base);
402 fail:
403 release_mem_region(mem->start, resource_size(mem));
404 return -EIO;
407 static int __exit omap_rtc_remove(struct platform_device *pdev)
409 struct rtc_device *rtc = platform_get_drvdata(pdev);
410 struct resource *mem = dev_get_drvdata(&rtc->dev);
412 device_init_wakeup(&pdev->dev, 0);
414 /* leave rtc running, but disable irqs */
415 rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
417 free_irq(omap_rtc_timer, rtc);
419 if (omap_rtc_timer != omap_rtc_alarm)
420 free_irq(omap_rtc_alarm, rtc);
422 rtc_device_unregister(rtc);
423 iounmap(rtc_base);
424 release_mem_region(mem->start, resource_size(mem));
425 return 0;
428 #ifdef CONFIG_PM
430 static u8 irqstat;
432 static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
434 irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
436 /* FIXME the RTC alarm is not currently acting as a wakeup event
437 * source, and in fact this enable() call is just saving a flag
438 * that's never used...
440 if (device_may_wakeup(&pdev->dev))
441 enable_irq_wake(omap_rtc_alarm);
442 else
443 rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
445 return 0;
448 static int omap_rtc_resume(struct platform_device *pdev)
450 if (device_may_wakeup(&pdev->dev))
451 disable_irq_wake(omap_rtc_alarm);
452 else
453 rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
454 return 0;
457 #else
458 #define omap_rtc_suspend NULL
459 #define omap_rtc_resume NULL
460 #endif
462 static void omap_rtc_shutdown(struct platform_device *pdev)
464 rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
467 MODULE_ALIAS("platform:omap_rtc");
468 static struct platform_driver omap_rtc_driver = {
469 .remove = __exit_p(omap_rtc_remove),
470 .suspend = omap_rtc_suspend,
471 .resume = omap_rtc_resume,
472 .shutdown = omap_rtc_shutdown,
473 .driver = {
474 .name = "omap_rtc",
475 .owner = THIS_MODULE,
479 static int __init rtc_init(void)
481 return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
483 module_init(rtc_init);
485 static void __exit rtc_exit(void)
487 platform_driver_unregister(&omap_rtc_driver);
489 module_exit(rtc_exit);
491 MODULE_AUTHOR("George G. Davis (and others)");
492 MODULE_LICENSE("GPL");