drivers/serial/pnx8xxx_uart.c

   1 /*
   2  * UART driver for PNX8XXX SoCs
   3  *
   4  * Author: Per Hallsmark per.hallsmark@mvista.com
   5  * Ported to 2.6 kernel by EmbeddedAlley
   6  * Reworked by Vitaly Wool <vitalywool@gmail.com>
   7  *
   8  * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   9  * Copyright (C) 2000 Deep Blue Solutions Ltd.
  10  *
  11  * This file is licensed under the terms of the GNU General Public License
  12  * version 2. This program is licensed "as is" without any warranty of
  13  * any kind, whether express or implied.
  14  *
  15  */
  16
  17 #if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  18 #define SUPPORT_SYSRQ
  19 #endif
  20
  21 #include <linux/module.h>
  22 #include <linux/ioport.h>
  23 #include <linux/init.h>
  24 #include <linux/console.h>
  25 #include <linux/sysrq.h>
  26 #include <linux/device.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/tty.h>
  29 #include <linux/tty_flip.h>
  30 #include <linux/serial_core.h>
  31 #include <linux/serial.h>
  32 #include <linux/serial_pnx8xxx.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36
  37 /* We'll be using StrongARM sa1100 serial port major/minor */
  38 #define SERIAL_PNX8XXX_MAJOR    204
  39 #define MINOR_START             5
  40
  41 #define NR_PORTS                2
  42
  43 #define PNX8XXX_ISR_PASS_LIMIT  256
  44
  45 /*
  46  * Convert from ignore_status_mask or read_status_mask to FIFO
  47  * and interrupt status bits
  48  */
  49 #define SM_TO_FIFO(x)   ((x) >> 10)
  50 #define SM_TO_ISTAT(x)  ((x) & 0x000001ff)
  51 #define FIFO_TO_SM(x)   ((x) << 10)
  52 #define ISTAT_TO_SM(x)  ((x) & 0x000001ff)
  53
  54 /*
  55  * This is the size of our serial port register set.
  56  */
  57 #define UART_PORT_SIZE  0x1000
  58
  59 /*
  60  * This determines how often we check the modem status signals
  61  * for any change.  They generally aren't connected to an IRQ
  62  * so we have to poll them.  We also check immediately before
  63  * filling the TX fifo incase CTS has been dropped.
  64  */
  65 #define MCTRL_TIMEOUT   (250*HZ/1000)
  66
  67 extern struct pnx8xxx_port pnx8xxx_ports[];
  68
  69 static inline int serial_in(struct pnx8xxx_port *sport, int offset)
  70 {
  71         return (__raw_readl(sport->port.membase + offset));
  72 }
  73
  74 static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value)
  75 {
  76         __raw_writel(value, sport->port.membase + offset);
  77 }
  78
  79 /*
  80  * Handle any change of modem status signal since we were last called.
  81  */
  82 static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
  83 {
  84         unsigned int status, changed;
  85
  86         status = sport->port.ops->get_mctrl(&sport->port);
  87         changed = status ^ sport->old_status;
  88
  89         if (changed == 0)
  90                 return;
  91
  92         sport->old_status = status;
  93
  94         if (changed & TIOCM_RI)
  95                 sport->port.icount.rng++;
  96         if (changed & TIOCM_DSR)
  97                 sport->port.icount.dsr++;
  98         if (changed & TIOCM_CAR)
  99                 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
 100         if (changed & TIOCM_CTS)
 101                 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 102
 103         wake_up_interruptible(&sport->port.info->delta_msr_wait);
 104 }
 105
 106 /*
 107  * This is our per-port timeout handler, for checking the
 108  * modem status signals.
 109  */
 110 static void pnx8xxx_timeout(unsigned long data)
 111 {
 112         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
 113         unsigned long flags;
 114
 115         if (sport->port.info) {
 116                 spin_lock_irqsave(&sport->port.lock, flags);
 117                 pnx8xxx_mctrl_check(sport);
 118                 spin_unlock_irqrestore(&sport->port.lock, flags);
 119
 120                 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
 121         }
 122 }
 123
 124 /*
 125  * interrupts disabled on entry
 126  */
 127 static void pnx8xxx_stop_tx(struct uart_port *port)
 128 {
 129         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 130         u32 ien;
 131
 132         /* Disable TX intr */
 133         ien = serial_in(sport, PNX8XXX_IEN);
 134         serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX);
 135
 136         /* Clear all pending TX intr */
 137         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
 138 }
 139
 140 /*
 141  * interrupts may not be disabled on entry
 142  */
 143 static void pnx8xxx_start_tx(struct uart_port *port)
 144 {
 145         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 146         u32 ien;
 147
 148         /* Clear all pending TX intr */
 149         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
 150
 151         /* Enable TX intr */
 152         ien = serial_in(sport, PNX8XXX_IEN);
 153         serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX);
 154 }
 155
 156 /*
 157  * Interrupts enabled
 158  */
 159 static void pnx8xxx_stop_rx(struct uart_port *port)
 160 {
 161         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 162         u32 ien;
 163
 164         /* Disable RX intr */
 165         ien = serial_in(sport, PNX8XXX_IEN);
 166         serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX);
 167
 168         /* Clear all pending RX intr */
 169         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX);
 170 }
 171
 172 /*
 173  * Set the modem control timer to fire immediately.
 174  */
 175 static void pnx8xxx_enable_ms(struct uart_port *port)
 176 {
 177         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 178
 179         mod_timer(&sport->timer, jiffies);
 180 }
 181
 182 static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 183 {
 184         struct tty_struct *tty = sport->port.info->port.tty;
 185         unsigned int status, ch, flg;
 186
 187         status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 188                  ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 189         while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
 190                 ch = serial_in(sport, PNX8XXX_FIFO);
 191
 192                 sport->port.icount.rx++;
 193
 194                 flg = TTY_NORMAL;
 195
 196                 /*
 197                  * note that the error handling code is
 198                  * out of the main execution path
 199                  */
 200                 if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
 201                                         PNX8XXX_UART_FIFO_RXPAR) |
 202                               ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
 203                         if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 204                                 sport->port.icount.parity++;
 205                         else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 206                                 sport->port.icount.frame++;
 207                         if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))
 208                                 sport->port.icount.overrun++;
 209
 210                         status &= sport->port.read_status_mask;
 211
 212                         if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 213                                 flg = TTY_PARITY;
 214                         else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 215                                 flg = TTY_FRAME;
 216
 217 #ifdef SUPPORT_SYSRQ
 218                         sport->port.sysrq = 0;
 219 #endif
 220                 }
 221
 222                 if (uart_handle_sysrq_char(&sport->port, ch))
 223                         goto ignore_char;
 224
 225                 uart_insert_char(&sport->port, status,
 226                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg);
 227
 228         ignore_char:
 229                 serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) |
 230                                 PNX8XXX_UART_LCR_RX_NEXT);
 231                 status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 232                          ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 233         }
 234         tty_flip_buffer_push(tty);
 235 }
 236
 237 static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
 238 {
 239         struct circ_buf *xmit = &sport->port.info->xmit;
 240
 241         if (sport->port.x_char) {
 242                 serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
 243                 sport->port.icount.tx++;
 244                 sport->port.x_char = 0;
 245                 return;
 246         }
 247
 248         /*
 249          * Check the modem control lines before
 250          * transmitting anything.
 251          */
 252         pnx8xxx_mctrl_check(sport);
 253
 254         if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
 255                 pnx8xxx_stop_tx(&sport->port);
 256                 return;
 257         }
 258
 259         /*
 260          * TX while bytes available
 261          */
 262         while (((serial_in(sport, PNX8XXX_FIFO) &
 263                                         PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) {
 264                 serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]);
 265                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 266                 sport->port.icount.tx++;
 267                 if (uart_circ_empty(xmit))
 268                         break;
 269         }
 270
 271         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 272                 uart_write_wakeup(&sport->port);
 273
 274         if (uart_circ_empty(xmit))
 275                 pnx8xxx_stop_tx(&sport->port);
 276 }
 277
 278 static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
 279 {
 280         struct pnx8xxx_port *sport = dev_id;
 281         unsigned int status;
 282
 283         spin_lock(&sport->port.lock);
 284         /* Get the interrupts */
 285         status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 286
 287         /* Break signal received */
 288         if (status & PNX8XXX_UART_INT_BREAK) {
 289                 sport->port.icount.brk++;
 290                 uart_handle_break(&sport->port);
 291         }
 292
 293         /* Byte received */
 294         if (status & PNX8XXX_UART_INT_RX)
 295                 pnx8xxx_rx_chars(sport);
 296
 297         /* TX holding register empty - transmit a byte */
 298         if (status & PNX8XXX_UART_INT_TX)
 299                 pnx8xxx_tx_chars(sport);
 300
 301         /* Clear the ISTAT register */
 302         serial_out(sport, PNX8XXX_ICLR, status);
 303
 304         spin_unlock(&sport->port.lock);
 305         return IRQ_HANDLED;
 306 }
 307
 308 /*
 309  * Return TIOCSER_TEMT when transmitter is not busy.
 310  */
 311 static unsigned int pnx8xxx_tx_empty(struct uart_port *port)
 312 {
 313         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 314
 315         return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT;
 316 }
 317
 318 static unsigned int pnx8xxx_get_mctrl(struct uart_port *port)
 319 {
 320         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 321         unsigned int mctrl = TIOCM_DSR;
 322         unsigned int msr;
 323
 324         /* REVISIT */
 325
 326         msr = serial_in(sport, PNX8XXX_MCR);
 327
 328         mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0;
 329         mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0;
 330
 331         return mctrl;
 332 }
 333
 334 static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 335 {
 336 #if     0       /* FIXME */
 337         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 338         unsigned int msr;
 339 #endif
 340 }
 341
 342 /*
 343  * Interrupts always disabled.
 344  */
 345 static void pnx8xxx_break_ctl(struct uart_port *port, int break_state)
 346 {
 347         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 348         unsigned long flags;
 349         unsigned int lcr;
 350
 351         spin_lock_irqsave(&sport->port.lock, flags);
 352         lcr = serial_in(sport, PNX8XXX_LCR);
 353         if (break_state == -1)
 354                 lcr |= PNX8XXX_UART_LCR_TXBREAK;
 355         else
 356                 lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
 357         serial_out(sport, PNX8XXX_LCR, lcr);
 358         spin_unlock_irqrestore(&sport->port.lock, flags);
 359 }
 360
 361 static int pnx8xxx_startup(struct uart_port *port)
 362 {
 363         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 364         int retval;
 365
 366         /*
 367          * Allocate the IRQ
 368          */
 369         retval = request_irq(sport->port.irq, pnx8xxx_int, 0,
 370                              "pnx8xxx-uart", sport);
 371         if (retval)
 372                 return retval;
 373
 374         /*
 375          * Finally, clear and enable interrupts
 376          */
 377
 378         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
 379                              PNX8XXX_UART_INT_ALLTX);
 380
 381         serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) |
 382                             PNX8XXX_UART_INT_ALLRX |
 383                             PNX8XXX_UART_INT_ALLTX);
 384
 385         /*
 386          * Enable modem status interrupts
 387          */
 388         spin_lock_irq(&sport->port.lock);
 389         pnx8xxx_enable_ms(&sport->port);
 390         spin_unlock_irq(&sport->port.lock);
 391
 392         return 0;
 393 }
 394
 395 static void pnx8xxx_shutdown(struct uart_port *port)
 396 {
 397         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 398         int lcr;
 399
 400         /*
 401          * Stop our timer.
 402          */
 403         del_timer_sync(&sport->timer);
 404
 405         /*
 406          * Disable all interrupts
 407          */
 408         serial_out(sport, PNX8XXX_IEN, 0);
 409
 410         /*
 411          * Reset the Tx and Rx FIFOS, disable the break condition
 412          */
 413         lcr = serial_in(sport, PNX8XXX_LCR);
 414         lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
 415         lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST;
 416         serial_out(sport, PNX8XXX_LCR, lcr);
 417
 418         /*
 419          * Clear all interrupts
 420          */
 421         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
 422                              PNX8XXX_UART_INT_ALLTX);
 423
 424         /*
 425          * Free the interrupt
 426          */
 427         free_irq(sport->port.irq, sport);
 428 }
 429
 430 static void
 431 pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios,
 432                    struct ktermios *old)
 433 {
 434         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 435         unsigned long flags;
 436         unsigned int lcr_fcr, old_ien, baud, quot;
 437         unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
 438
 439         /*
 440          * We only support CS7 and CS8.
 441          */
 442         while ((termios->c_cflag & CSIZE) != CS7 &&
 443                (termios->c_cflag & CSIZE) != CS8) {
 444                 termios->c_cflag &= ~CSIZE;
 445                 termios->c_cflag |= old_csize;
 446                 old_csize = CS8;
 447         }
 448
 449         if ((termios->c_cflag & CSIZE) == CS8)
 450                 lcr_fcr = PNX8XXX_UART_LCR_8BIT;
 451         else
 452                 lcr_fcr = 0;
 453
 454         if (termios->c_cflag & CSTOPB)
 455                 lcr_fcr |= PNX8XXX_UART_LCR_2STOPB;
 456         if (termios->c_cflag & PARENB) {
 457                 lcr_fcr |= PNX8XXX_UART_LCR_PAREN;
 458                 if (!(termios->c_cflag & PARODD))
 459                         lcr_fcr |= PNX8XXX_UART_LCR_PAREVN;
 460         }
 461
 462         /*
 463          * Ask the core to calculate the divisor for us.
 464          */
 465         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
 466         quot = uart_get_divisor(port, baud);
 467
 468         spin_lock_irqsave(&sport->port.lock, flags);
 469
 470         sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) |
 471                                 ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) |
 472                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
 473         if (termios->c_iflag & INPCK)
 474                 sport->port.read_status_mask |=
 475                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
 476                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
 477         if (termios->c_iflag & (BRKINT | PARMRK))
 478                 sport->port.read_status_mask |=
 479                         ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
 480
 481         /*
 482          * Characters to ignore
 483          */
 484         sport->port.ignore_status_mask = 0;
 485         if (termios->c_iflag & IGNPAR)
 486                 sport->port.ignore_status_mask |=
 487                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
 488                         FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
 489         if (termios->c_iflag & IGNBRK) {
 490                 sport->port.ignore_status_mask |=
 491                         ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
 492                 /*
 493                  * If we're ignoring parity and break indicators,
 494                  * ignore overruns too (for real raw support).
 495                  */
 496                 if (termios->c_iflag & IGNPAR)
 497                         sport->port.ignore_status_mask |=
 498                                 ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN);
 499         }
 500
 501         /*
 502          * ignore all characters if CREAD is not set
 503          */
 504         if ((termios->c_cflag & CREAD) == 0)
 505                 sport->port.ignore_status_mask |=
 506                         ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
 507
 508         del_timer_sync(&sport->timer);
 509
 510         /*
 511          * Update the per-port timeout.
 512          */
 513         uart_update_timeout(port, termios->c_cflag, baud);
 514
 515         /*
 516          * disable interrupts and drain transmitter
 517          */
 518         old_ien = serial_in(sport, PNX8XXX_IEN);
 519         serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
 520                                         PNX8XXX_UART_INT_ALLRX));
 521
 522         while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA)
 523                 barrier();
 524
 525         /* then, disable everything */
 526         serial_out(sport, PNX8XXX_IEN, 0);
 527
 528         /* Reset the Rx and Tx FIFOs too */
 529         lcr_fcr |= PNX8XXX_UART_LCR_TX_RST;
 530         lcr_fcr |= PNX8XXX_UART_LCR_RX_RST;
 531
 532         /* set the parity, stop bits and data size */
 533         serial_out(sport, PNX8XXX_LCR, lcr_fcr);
 534
 535         /* set the baud rate */
 536         quot -= 1;
 537         serial_out(sport, PNX8XXX_BAUD, quot);
 538
 539         serial_out(sport, PNX8XXX_ICLR, -1);
 540
 541         serial_out(sport, PNX8XXX_IEN, old_ien);
 542
 543         if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
 544                 pnx8xxx_enable_ms(&sport->port);
 545
 546         spin_unlock_irqrestore(&sport->port.lock, flags);
 547 }
 548
 549 static const char *pnx8xxx_type(struct uart_port *port)
 550 {
 551         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 552
 553         return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL;
 554 }
 555
 556 /*
 557  * Release the memory region(s) being used by 'port'.
 558  */
 559 static void pnx8xxx_release_port(struct uart_port *port)
 560 {
 561         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 562
 563         release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
 564 }
 565
 566 /*
 567  * Request the memory region(s) being used by 'port'.
 568  */
 569 static int pnx8xxx_request_port(struct uart_port *port)
 570 {
 571         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 572         return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
 573                         "pnx8xxx-uart") != NULL ? 0 : -EBUSY;
 574 }
 575
 576 /*
 577  * Configure/autoconfigure the port.
 578  */
 579 static void pnx8xxx_config_port(struct uart_port *port, int flags)
 580 {
 581         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 582
 583         if (flags & UART_CONFIG_TYPE &&
 584             pnx8xxx_request_port(&sport->port) == 0)
 585                 sport->port.type = PORT_PNX8XXX;
 586 }
 587
 588 /*
 589  * Verify the new serial_struct (for TIOCSSERIAL).
 590  * The only change we allow are to the flags and type, and
 591  * even then only between PORT_PNX8XXX and PORT_UNKNOWN
 592  */
 593 static int
 594 pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser)
 595 {
 596         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 597         int ret = 0;
 598
 599         if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX)
 600                 ret = -EINVAL;
 601         if (sport->port.irq != ser->irq)
 602                 ret = -EINVAL;
 603         if (ser->io_type != SERIAL_IO_MEM)
 604                 ret = -EINVAL;
 605         if (sport->port.uartclk / 16 != ser->baud_base)
 606                 ret = -EINVAL;
 607         if ((void *)sport->port.mapbase != ser->iomem_base)
 608                 ret = -EINVAL;
 609         if (sport->port.iobase != ser->port)
 610                 ret = -EINVAL;
 611         if (ser->hub6 != 0)
 612                 ret = -EINVAL;
 613         return ret;
 614 }
 615
 616 static struct uart_ops pnx8xxx_pops = {
 617         .tx_empty       = pnx8xxx_tx_empty,
 618         .set_mctrl      = pnx8xxx_set_mctrl,
 619         .get_mctrl      = pnx8xxx_get_mctrl,
 620         .stop_tx        = pnx8xxx_stop_tx,
 621         .start_tx       = pnx8xxx_start_tx,
 622         .stop_rx        = pnx8xxx_stop_rx,
 623         .enable_ms      = pnx8xxx_enable_ms,
 624         .break_ctl      = pnx8xxx_break_ctl,
 625         .startup        = pnx8xxx_startup,
 626         .shutdown       = pnx8xxx_shutdown,
 627         .set_termios    = pnx8xxx_set_termios,
 628         .type           = pnx8xxx_type,
 629         .release_port   = pnx8xxx_release_port,
 630         .request_port   = pnx8xxx_request_port,
 631         .config_port    = pnx8xxx_config_port,
 632         .verify_port    = pnx8xxx_verify_port,
 633 };
 634
 635
 636 /*
 637  * Setup the PNX8XXX serial ports.
 638  *
 639  * Note also that we support "console=ttySx" where "x" is either 0 or 1.
 640  */
 641 static void __init pnx8xxx_init_ports(void)
 642 {
 643         static int first = 1;
 644         int i;
 645
 646         if (!first)
 647                 return;
 648         first = 0;
 649
 650         for (i = 0; i < NR_PORTS; i++) {
 651                 init_timer(&pnx8xxx_ports[i].timer);
 652                 pnx8xxx_ports[i].timer.function = pnx8xxx_timeout;
 653                 pnx8xxx_ports[i].timer.data     = (unsigned long)&pnx8xxx_ports[i];
 654                 pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
 655         }
 656 }
 657
 658 #ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE
 659
 660 static void pnx8xxx_console_putchar(struct uart_port *port, int ch)
 661 {
 662         struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
 663         int status;
 664
 665         do {
 666                 /* Wait for UART_TX register to empty */
 667                 status = serial_in(sport, PNX8XXX_FIFO);
 668         } while (status & PNX8XXX_UART_FIFO_TXFIFO);
 669         serial_out(sport, PNX8XXX_FIFO, ch);
 670 }
 671
 672 /*
 673  * Interrupts are disabled on entering
 674  */static void
 675 pnx8xxx_console_write(struct console *co, const char *s, unsigned int count)
 676 {
 677         struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index];
 678         unsigned int old_ien, status;
 679
 680         /*
 681          *      First, save IEN and then disable interrupts
 682          */
 683         old_ien = serial_in(sport, PNX8XXX_IEN);
 684         serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
 685                                         PNX8XXX_UART_INT_ALLRX));
 686
 687         uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar);
 688
 689         /*
 690          *      Finally, wait for transmitter to become empty
 691          *      and restore IEN
 692          */
 693         do {
 694                 /* Wait for UART_TX register to empty */
 695                 status = serial_in(sport, PNX8XXX_FIFO);
 696         } while (status & PNX8XXX_UART_FIFO_TXFIFO);
 697
 698         /* Clear TX and EMPTY interrupt */
 699         serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX |
 700                              PNX8XXX_UART_INT_EMPTY);
 701
 702         serial_out(sport, PNX8XXX_IEN, old_ien);
 703 }
 704
 705 static int __init
 706 pnx8xxx_console_setup(struct console *co, char *options)
 707 {
 708         struct pnx8xxx_port *sport;
 709         int baud = 38400;
 710         int bits = 8;
 711         int parity = 'n';
 712         int flow = 'n';
 713
 714         /*
 715          * Check whether an invalid uart number has been specified, and
 716          * if so, search for the first available port that does have
 717          * console support.
 718          */
 719         if (co->index == -1 || co->index >= NR_PORTS)
 720                 co->index = 0;
 721         sport = &pnx8xxx_ports[co->index];
 722
 723         if (options)
 724                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 725
 726         return uart_set_options(&sport->port, co, baud, parity, bits, flow);
 727 }
 728
 729 static struct uart_driver pnx8xxx_reg;
 730 static struct console pnx8xxx_console = {
 731         .name           = "ttyS",
 732         .write          = pnx8xxx_console_write,
 733         .device         = uart_console_device,
 734         .setup          = pnx8xxx_console_setup,
 735         .flags          = CON_PRINTBUFFER,
 736         .index          = -1,
 737         .data           = &pnx8xxx_reg,
 738 };
 739
 740 static int __init pnx8xxx_rs_console_init(void)
 741 {
 742         pnx8xxx_init_ports();
 743         register_console(&pnx8xxx_console);
 744         return 0;
 745 }
 746 console_initcall(pnx8xxx_rs_console_init);
 747
 748 #define PNX8XXX_CONSOLE &pnx8xxx_console
 749 #else
 750 #define PNX8XXX_CONSOLE NULL
 751 #endif
 752
 753 static struct uart_driver pnx8xxx_reg = {
 754         .owner                  = THIS_MODULE,
 755         .driver_name            = "ttyS",
 756         .dev_name               = "ttyS",
 757         .major                  = SERIAL_PNX8XXX_MAJOR,
 758         .minor                  = MINOR_START,
 759         .nr                     = NR_PORTS,
 760         .cons                   = PNX8XXX_CONSOLE,
 761 };
 762
 763 static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state)
 764 {
 765         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 766
 767         return uart_suspend_port(&pnx8xxx_reg, &sport->port);
 768 }
 769
 770 static int pnx8xxx_serial_resume(struct platform_device *pdev)
 771 {
 772         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 773
 774         return uart_resume_port(&pnx8xxx_reg, &sport->port);
 775 }
 776
 777 static int pnx8xxx_serial_probe(struct platform_device *pdev)
 778 {
 779         struct resource *res = pdev->resource;
 780         int i;
 781
 782         for (i = 0; i < pdev->num_resources; i++, res++) {
 783                 if (!(res->flags & IORESOURCE_MEM))
 784                         continue;
 785
 786                 for (i = 0; i < NR_PORTS; i++) {
 787                         if (pnx8xxx_ports[i].port.mapbase != res->start)
 788                                 continue;
 789
 790                         pnx8xxx_ports[i].port.dev = &pdev->dev;
 791                         uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
 792                         platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
 793                         break;
 794                 }
 795         }
 796
 797         return 0;
 798 }
 799
 800 static int pnx8xxx_serial_remove(struct platform_device *pdev)
 801 {
 802         struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 803
 804         platform_set_drvdata(pdev, NULL);
 805
 806         if (sport)
 807                 uart_remove_one_port(&pnx8xxx_reg, &sport->port);
 808
 809         return 0;
 810 }
 811
 812 static struct platform_driver pnx8xxx_serial_driver = {
 813         .driver         = {
 814                 .name   = "pnx8xxx-uart",
 815                 .owner  = THIS_MODULE,
 816         },
 817         .probe          = pnx8xxx_serial_probe,
 818         .remove         = pnx8xxx_serial_remove,
 819         .suspend        = pnx8xxx_serial_suspend,
 820         .resume         = pnx8xxx_serial_resume,
 821 };
 822
 823 static int __init pnx8xxx_serial_init(void)
 824 {
 825         int ret;
 826
 827         printk(KERN_INFO "Serial: PNX8XXX driver\n");
 828
 829         pnx8xxx_init_ports();
 830
 831         ret = uart_register_driver(&pnx8xxx_reg);
 832         if (ret == 0) {
 833                 ret = platform_driver_register(&pnx8xxx_serial_driver);
 834                 if (ret)
 835                         uart_unregister_driver(&pnx8xxx_reg);
 836         }
 837         return ret;
 838 }
 839
 840 static void __exit pnx8xxx_serial_exit(void)
 841 {
 842         platform_driver_unregister(&pnx8xxx_serial_driver);
 843         uart_unregister_driver(&pnx8xxx_reg);
 844 }
 845
 846 module_init(pnx8xxx_serial_init);
 847 module_exit(pnx8xxx_serial_exit);
 848
 849 MODULE_AUTHOR("Embedded Alley Solutions, Inc.");
 850 MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
 851 MODULE_LICENSE("GPL");
 852 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
 853 MODULE_ALIAS("platform:pnx8xxx-uart");