2 * Low-Level PCI Support for SGI Visual Workstation
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
7 #include <linux/kernel.h>
9 #include <linux/init.h>
11 #include <asm/setup.h>
12 #include <asm/visws/cobalt.h>
13 #include <asm/visws/lithium.h>
17 static int pci_visws_enable_irq(struct pci_dev
*dev
) { return 0; }
18 static void pci_visws_disable_irq(struct pci_dev
*dev
) { }
20 /* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
21 /* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
23 /* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
26 unsigned int pci_bus0
, pci_bus1
;
28 static inline u8
bridge_swizzle(u8 pin
, u8 slot
)
30 return (((pin
- 1) + slot
) % 4) + 1;
33 static u8 __init
visws_swizzle(struct pci_dev
*dev
, u8
*pinp
)
37 while (dev
->bus
->self
) { /* Move up the chain of bridges. */
38 pin
= bridge_swizzle(pin
, PCI_SLOT(dev
->devfn
));
43 return PCI_SLOT(dev
->devfn
);
46 static int __init
visws_map_irq(struct pci_dev
*dev
, u8 slot
, u8 pin
)
48 int irq
, bus
= dev
->bus
->number
;
52 /* Nothing useful at PIIX4 pin 1 */
53 if (bus
== pci_bus0
&& slot
== 4 && pin
== 0)
56 /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
57 if (bus
== pci_bus0
&& slot
== 4 && pin
== 3) {
58 irq
= CO_IRQ(CO_APIC_PIIX4_USB
);
62 /* First pin spread down 1 APIC entry per slot */
64 irq
= CO_IRQ((bus
== pci_bus0
? CO_APIC_PCIB_BASE0
:
65 CO_APIC_PCIA_BASE0
) + slot
);
69 /* lines 1,2,3 from any slot is shared in this twirly pattern */
70 if (bus
== pci_bus1
) {
71 /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
72 irq
= CO_IRQ(CO_APIC_PCIA_BASE123
+ ((slot
+ (pin
- 1)) % 2));
73 } else { /* bus == pci_bus0 */
74 /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
76 slot
= 3; /* same pattern */
77 irq
= CO_IRQ(CO_APIC_PCIA_BASE123
+ ((3 - slot
) + (pin
- 1) % 3));
80 printk(KERN_DEBUG
"PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus
, slot
, pin
, irq
);
84 void __init
pcibios_update_irq(struct pci_dev
*dev
, int irq
)
86 pci_write_config_byte(dev
, PCI_INTERRUPT_LINE
, irq
);
89 int __init
pci_visws_init(void)
94 pcibios_enable_irq
= &pci_visws_enable_irq
;
95 pcibios_disable_irq
= &pci_visws_disable_irq
;
97 /* The VISWS supports configuration access type 1 only */
98 pci_probe
= (pci_probe
| PCI_PROBE_CONF1
) &
99 ~(PCI_PROBE_BIOS
| PCI_PROBE_CONF2
);
101 pci_bus0
= li_pcib_read16(LI_PCI_BUSNUM
) & 0xff;
102 pci_bus1
= li_pcia_read16(LI_PCI_BUSNUM
) & 0xff;
104 printk(KERN_INFO
"PCI: Lithium bridge A bus: %u, "
105 "bridge B (PIIX4) bus: %u\n", pci_bus1
, pci_bus0
);
107 raw_pci_ops
= &pci_direct_conf1
;
108 pci_scan_bus_with_sysdata(pci_bus0
);
109 pci_scan_bus_with_sysdata(pci_bus1
);
110 pci_fixup_irqs(visws_swizzle
, visws_map_irq
);
111 pcibios_resource_survey();