3 * Written by Mark Hemment, 1996/97.
4 * (markhe@nextd.demon.co.uk)
6 * kmem_cache_destroy() + some cleanup - 1999 Andrea Arcangeli
8 * Major cleanup, different bufctl logic, per-cpu arrays
9 * (c) 2000 Manfred Spraul
11 * Cleanup, make the head arrays unconditional, preparation for NUMA
12 * (c) 2002 Manfred Spraul
14 * An implementation of the Slab Allocator as described in outline in;
15 * UNIX Internals: The New Frontiers by Uresh Vahalia
16 * Pub: Prentice Hall ISBN 0-13-101908-2
17 * or with a little more detail in;
18 * The Slab Allocator: An Object-Caching Kernel Memory Allocator
19 * Jeff Bonwick (Sun Microsystems).
20 * Presented at: USENIX Summer 1994 Technical Conference
22 * The memory is organized in caches, one cache for each object type.
23 * (e.g. inode_cache, dentry_cache, buffer_head, vm_area_struct)
24 * Each cache consists out of many slabs (they are small (usually one
25 * page long) and always contiguous), and each slab contains multiple
26 * initialized objects.
28 * This means, that your constructor is used only for newly allocated
29 * slabs and you must pass objects with the same initializations to
32 * Each cache can only support one memory type (GFP_DMA, GFP_HIGHMEM,
33 * normal). If you need a special memory type, then must create a new
34 * cache for that memory type.
36 * In order to reduce fragmentation, the slabs are sorted in 3 groups:
37 * full slabs with 0 free objects
39 * empty slabs with no allocated objects
41 * If partial slabs exist, then new allocations come from these slabs,
42 * otherwise from empty slabs or new slabs are allocated.
44 * kmem_cache_destroy() CAN CRASH if you try to allocate from the cache
45 * during kmem_cache_destroy(). The caller must prevent concurrent allocs.
47 * Each cache has a short per-cpu head array, most allocs
48 * and frees go into that array, and if that array overflows, then 1/2
49 * of the entries in the array are given back into the global cache.
50 * The head array is strictly LIFO and should improve the cache hit rates.
51 * On SMP, it additionally reduces the spinlock operations.
53 * The c_cpuarray may not be read with enabled local interrupts -
54 * it's changed with a smp_call_function().
56 * SMP synchronization:
57 * constructors and destructors are called without any locking.
58 * Several members in struct kmem_cache and struct slab never change, they
59 * are accessed without any locking.
60 * The per-cpu arrays are never accessed from the wrong cpu, no locking,
61 * and local interrupts are disabled so slab code is preempt-safe.
62 * The non-constant members are protected with a per-cache irq spinlock.
64 * Many thanks to Mark Hemment, who wrote another per-cpu slab patch
65 * in 2000 - many ideas in the current implementation are derived from
68 * Further notes from the original documentation:
70 * 11 April '97. Started multi-threading - markhe
71 * The global cache-chain is protected by the mutex 'cache_chain_mutex'.
72 * The sem is only needed when accessing/extending the cache-chain, which
73 * can never happen inside an interrupt (kmem_cache_create(),
74 * kmem_cache_shrink() and kmem_cache_reap()).
76 * At present, each engine can be growing a cache. This should be blocked.
78 * 15 March 2005. NUMA slab allocator.
79 * Shai Fultheim <shai@scalex86.org>.
80 * Shobhit Dayal <shobhit@calsoftinc.com>
81 * Alok N Kataria <alokk@calsoftinc.com>
82 * Christoph Lameter <christoph@lameter.com>
84 * Modified the slab allocator to be node aware on NUMA systems.
85 * Each node has its own list of partial, free and full slabs.
86 * All object allocations for a node occur from node specific slab lists.
89 #include <linux/slab.h>
91 #include <linux/poison.h>
92 #include <linux/swap.h>
93 #include <linux/cache.h>
94 #include <linux/interrupt.h>
95 #include <linux/init.h>
96 #include <linux/compiler.h>
97 #include <linux/cpuset.h>
98 #include <linux/proc_fs.h>
99 #include <linux/seq_file.h>
100 #include <linux/notifier.h>
101 #include <linux/kallsyms.h>
102 #include <linux/cpu.h>
103 #include <linux/sysctl.h>
104 #include <linux/module.h>
105 #include <linux/kmemtrace.h>
106 #include <linux/rcupdate.h>
107 #include <linux/string.h>
108 #include <linux/uaccess.h>
109 #include <linux/nodemask.h>
110 #include <linux/kmemleak.h>
111 #include <linux/mempolicy.h>
112 #include <linux/mutex.h>
113 #include <linux/fault-inject.h>
114 #include <linux/rtmutex.h>
115 #include <linux/reciprocal_div.h>
116 #include <linux/debugobjects.h>
117 #include <linux/kmemcheck.h>
119 #include <asm/cacheflush.h>
120 #include <asm/tlbflush.h>
121 #include <asm/page.h>
124 * DEBUG - 1 for kmem_cache_create() to honour; SLAB_RED_ZONE & SLAB_POISON.
125 * 0 for faster, smaller code (especially in the critical paths).
127 * STATS - 1 to collect stats for /proc/slabinfo.
128 * 0 for faster, smaller code (especially in the critical paths).
130 * FORCED_DEBUG - 1 enables SLAB_RED_ZONE and SLAB_POISON (if possible)
133 #ifdef CONFIG_DEBUG_SLAB
136 #define FORCED_DEBUG 1
140 #define FORCED_DEBUG 0
143 /* Shouldn't this be in a header file somewhere? */
144 #define BYTES_PER_WORD sizeof(void *)
145 #define REDZONE_ALIGN max(BYTES_PER_WORD, __alignof__(unsigned long long))
147 #ifndef ARCH_KMALLOC_MINALIGN
149 * Enforce a minimum alignment for the kmalloc caches.
150 * Usually, the kmalloc caches are cache_line_size() aligned, except when
151 * DEBUG and FORCED_DEBUG are enabled, then they are BYTES_PER_WORD aligned.
152 * Some archs want to perform DMA into kmalloc caches and need a guaranteed
153 * alignment larger than the alignment of a 64-bit integer.
154 * ARCH_KMALLOC_MINALIGN allows that.
155 * Note that increasing this value may disable some debug features.
157 #define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
160 #ifndef ARCH_SLAB_MINALIGN
162 * Enforce a minimum alignment for all caches.
163 * Intended for archs that get misalignment faults even for BYTES_PER_WORD
164 * aligned buffers. Includes ARCH_KMALLOC_MINALIGN.
165 * If possible: Do not enable this flag for CONFIG_DEBUG_SLAB, it disables
166 * some debug features.
168 #define ARCH_SLAB_MINALIGN 0
171 #ifndef ARCH_KMALLOC_FLAGS
172 #define ARCH_KMALLOC_FLAGS SLAB_HWCACHE_ALIGN
175 /* Legal flag mask for kmem_cache_create(). */
177 # define CREATE_MASK (SLAB_RED_ZONE | \
178 SLAB_POISON | SLAB_HWCACHE_ALIGN | \
181 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
182 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
183 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
185 # define CREATE_MASK (SLAB_HWCACHE_ALIGN | \
187 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
188 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
189 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
195 * Bufctl's are used for linking objs within a slab
198 * This implementation relies on "struct page" for locating the cache &
199 * slab an object belongs to.
200 * This allows the bufctl structure to be small (one int), but limits
201 * the number of objects a slab (not a cache) can contain when off-slab
202 * bufctls are used. The limit is the size of the largest general cache
203 * that does not use off-slab slabs.
204 * For 32bit archs with 4 kB pages, is this 56.
205 * This is not serious, as it is only for large objects, when it is unwise
206 * to have too many per slab.
207 * Note: This limit can be raised by introducing a general cache whose size
208 * is less than 512 (PAGE_SIZE<<3), but greater than 256.
211 typedef unsigned int kmem_bufctl_t
;
212 #define BUFCTL_END (((kmem_bufctl_t)(~0U))-0)
213 #define BUFCTL_FREE (((kmem_bufctl_t)(~0U))-1)
214 #define BUFCTL_ACTIVE (((kmem_bufctl_t)(~0U))-2)
215 #define SLAB_LIMIT (((kmem_bufctl_t)(~0U))-3)
220 * Manages the objs in a slab. Placed either at the beginning of mem allocated
221 * for a slab, or allocated from an general cache.
222 * Slabs are chained into three list: fully used, partial, fully free slabs.
225 struct list_head list
;
226 unsigned long colouroff
;
227 void *s_mem
; /* including colour offset */
228 unsigned int inuse
; /* num of objs active in slab */
230 unsigned short nodeid
;
236 * slab_destroy on a SLAB_DESTROY_BY_RCU cache uses this structure to
237 * arrange for kmem_freepages to be called via RCU. This is useful if
238 * we need to approach a kernel structure obliquely, from its address
239 * obtained without the usual locking. We can lock the structure to
240 * stabilize it and check it's still at the given address, only if we
241 * can be sure that the memory has not been meanwhile reused for some
242 * other kind of object (which our subsystem's lock might corrupt).
244 * rcu_read_lock before reading the address, then rcu_read_unlock after
245 * taking the spinlock within the structure expected at that address.
247 * We assume struct slab_rcu can overlay struct slab when destroying.
250 struct rcu_head head
;
251 struct kmem_cache
*cachep
;
259 * - LIFO ordering, to hand out cache-warm objects from _alloc
260 * - reduce the number of linked list operations
261 * - reduce spinlock operations
263 * The limit is stored in the per-cpu structure to reduce the data cache
270 unsigned int batchcount
;
271 unsigned int touched
;
274 * Must have this definition in here for the proper
275 * alignment of array_cache. Also simplifies accessing
281 * bootstrap: The caches do not work without cpuarrays anymore, but the
282 * cpuarrays are allocated from the generic caches...
284 #define BOOT_CPUCACHE_ENTRIES 1
285 struct arraycache_init
{
286 struct array_cache cache
;
287 void *entries
[BOOT_CPUCACHE_ENTRIES
];
291 * The slab lists for all objects.
294 struct list_head slabs_partial
; /* partial list first, better asm code */
295 struct list_head slabs_full
;
296 struct list_head slabs_free
;
297 unsigned long free_objects
;
298 unsigned int free_limit
;
299 unsigned int colour_next
; /* Per-node cache coloring */
300 spinlock_t list_lock
;
301 struct array_cache
*shared
; /* shared per node */
302 struct array_cache
**alien
; /* on other nodes */
303 unsigned long next_reap
; /* updated without locking */
304 int free_touched
; /* updated without locking */
308 * Need this for bootstrapping a per node allocator.
310 #define NUM_INIT_LISTS (3 * MAX_NUMNODES)
311 struct kmem_list3 __initdata initkmem_list3
[NUM_INIT_LISTS
];
312 #define CACHE_CACHE 0
313 #define SIZE_AC MAX_NUMNODES
314 #define SIZE_L3 (2 * MAX_NUMNODES)
316 static int drain_freelist(struct kmem_cache
*cache
,
317 struct kmem_list3
*l3
, int tofree
);
318 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int len
,
320 static int enable_cpucache(struct kmem_cache
*cachep
, gfp_t gfp
);
321 static void cache_reap(struct work_struct
*unused
);
324 * This function must be completely optimized away if a constant is passed to
325 * it. Mostly the same as what is in linux/slab.h except it returns an index.
327 static __always_inline
int index_of(const size_t size
)
329 extern void __bad_size(void);
331 if (__builtin_constant_p(size
)) {
339 #include <linux/kmalloc_sizes.h>
347 static int slab_early_init
= 1;
349 #define INDEX_AC index_of(sizeof(struct arraycache_init))
350 #define INDEX_L3 index_of(sizeof(struct kmem_list3))
352 static void kmem_list3_init(struct kmem_list3
*parent
)
354 INIT_LIST_HEAD(&parent
->slabs_full
);
355 INIT_LIST_HEAD(&parent
->slabs_partial
);
356 INIT_LIST_HEAD(&parent
->slabs_free
);
357 parent
->shared
= NULL
;
358 parent
->alien
= NULL
;
359 parent
->colour_next
= 0;
360 spin_lock_init(&parent
->list_lock
);
361 parent
->free_objects
= 0;
362 parent
->free_touched
= 0;
365 #define MAKE_LIST(cachep, listp, slab, nodeid) \
367 INIT_LIST_HEAD(listp); \
368 list_splice(&(cachep->nodelists[nodeid]->slab), listp); \
371 #define MAKE_ALL_LISTS(cachep, ptr, nodeid) \
373 MAKE_LIST((cachep), (&(ptr)->slabs_full), slabs_full, nodeid); \
374 MAKE_LIST((cachep), (&(ptr)->slabs_partial), slabs_partial, nodeid); \
375 MAKE_LIST((cachep), (&(ptr)->slabs_free), slabs_free, nodeid); \
378 #define CFLGS_OFF_SLAB (0x80000000UL)
379 #define OFF_SLAB(x) ((x)->flags & CFLGS_OFF_SLAB)
381 #define BATCHREFILL_LIMIT 16
383 * Optimization question: fewer reaps means less probability for unnessary
384 * cpucache drain/refill cycles.
386 * OTOH the cpuarrays can contain lots of objects,
387 * which could lock up otherwise freeable slabs.
389 #define REAPTIMEOUT_CPUC (2*HZ)
390 #define REAPTIMEOUT_LIST3 (4*HZ)
393 #define STATS_INC_ACTIVE(x) ((x)->num_active++)
394 #define STATS_DEC_ACTIVE(x) ((x)->num_active--)
395 #define STATS_INC_ALLOCED(x) ((x)->num_allocations++)
396 #define STATS_INC_GROWN(x) ((x)->grown++)
397 #define STATS_ADD_REAPED(x,y) ((x)->reaped += (y))
398 #define STATS_SET_HIGH(x) \
400 if ((x)->num_active > (x)->high_mark) \
401 (x)->high_mark = (x)->num_active; \
403 #define STATS_INC_ERR(x) ((x)->errors++)
404 #define STATS_INC_NODEALLOCS(x) ((x)->node_allocs++)
405 #define STATS_INC_NODEFREES(x) ((x)->node_frees++)
406 #define STATS_INC_ACOVERFLOW(x) ((x)->node_overflow++)
407 #define STATS_SET_FREEABLE(x, i) \
409 if ((x)->max_freeable < i) \
410 (x)->max_freeable = i; \
412 #define STATS_INC_ALLOCHIT(x) atomic_inc(&(x)->allochit)
413 #define STATS_INC_ALLOCMISS(x) atomic_inc(&(x)->allocmiss)
414 #define STATS_INC_FREEHIT(x) atomic_inc(&(x)->freehit)
415 #define STATS_INC_FREEMISS(x) atomic_inc(&(x)->freemiss)
417 #define STATS_INC_ACTIVE(x) do { } while (0)
418 #define STATS_DEC_ACTIVE(x) do { } while (0)
419 #define STATS_INC_ALLOCED(x) do { } while (0)
420 #define STATS_INC_GROWN(x) do { } while (0)
421 #define STATS_ADD_REAPED(x,y) do { } while (0)
422 #define STATS_SET_HIGH(x) do { } while (0)
423 #define STATS_INC_ERR(x) do { } while (0)
424 #define STATS_INC_NODEALLOCS(x) do { } while (0)
425 #define STATS_INC_NODEFREES(x) do { } while (0)
426 #define STATS_INC_ACOVERFLOW(x) do { } while (0)
427 #define STATS_SET_FREEABLE(x, i) do { } while (0)
428 #define STATS_INC_ALLOCHIT(x) do { } while (0)
429 #define STATS_INC_ALLOCMISS(x) do { } while (0)
430 #define STATS_INC_FREEHIT(x) do { } while (0)
431 #define STATS_INC_FREEMISS(x) do { } while (0)
437 * memory layout of objects:
439 * 0 .. cachep->obj_offset - BYTES_PER_WORD - 1: padding. This ensures that
440 * the end of an object is aligned with the end of the real
441 * allocation. Catches writes behind the end of the allocation.
442 * cachep->obj_offset - BYTES_PER_WORD .. cachep->obj_offset - 1:
444 * cachep->obj_offset: The real object.
445 * cachep->buffer_size - 2* BYTES_PER_WORD: redzone word [BYTES_PER_WORD long]
446 * cachep->buffer_size - 1* BYTES_PER_WORD: last caller address
447 * [BYTES_PER_WORD long]
449 static int obj_offset(struct kmem_cache
*cachep
)
451 return cachep
->obj_offset
;
454 static int obj_size(struct kmem_cache
*cachep
)
456 return cachep
->obj_size
;
459 static unsigned long long *dbg_redzone1(struct kmem_cache
*cachep
, void *objp
)
461 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
462 return (unsigned long long*) (objp
+ obj_offset(cachep
) -
463 sizeof(unsigned long long));
466 static unsigned long long *dbg_redzone2(struct kmem_cache
*cachep
, void *objp
)
468 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
469 if (cachep
->flags
& SLAB_STORE_USER
)
470 return (unsigned long long *)(objp
+ cachep
->buffer_size
-
471 sizeof(unsigned long long) -
473 return (unsigned long long *) (objp
+ cachep
->buffer_size
-
474 sizeof(unsigned long long));
477 static void **dbg_userword(struct kmem_cache
*cachep
, void *objp
)
479 BUG_ON(!(cachep
->flags
& SLAB_STORE_USER
));
480 return (void **)(objp
+ cachep
->buffer_size
- BYTES_PER_WORD
);
485 #define obj_offset(x) 0
486 #define obj_size(cachep) (cachep->buffer_size)
487 #define dbg_redzone1(cachep, objp) ({BUG(); (unsigned long long *)NULL;})
488 #define dbg_redzone2(cachep, objp) ({BUG(); (unsigned long long *)NULL;})
489 #define dbg_userword(cachep, objp) ({BUG(); (void **)NULL;})
493 #ifdef CONFIG_KMEMTRACE
494 size_t slab_buffer_size(struct kmem_cache
*cachep
)
496 return cachep
->buffer_size
;
498 EXPORT_SYMBOL(slab_buffer_size
);
502 * Do not go above this order unless 0 objects fit into the slab.
504 #define BREAK_GFP_ORDER_HI 1
505 #define BREAK_GFP_ORDER_LO 0
506 static int slab_break_gfp_order
= BREAK_GFP_ORDER_LO
;
509 * Functions for storing/retrieving the cachep and or slab from the page
510 * allocator. These are used to find the slab an obj belongs to. With kfree(),
511 * these are used to find the cache which an obj belongs to.
513 static inline void page_set_cache(struct page
*page
, struct kmem_cache
*cache
)
515 page
->lru
.next
= (struct list_head
*)cache
;
518 static inline struct kmem_cache
*page_get_cache(struct page
*page
)
520 page
= compound_head(page
);
521 BUG_ON(!PageSlab(page
));
522 return (struct kmem_cache
*)page
->lru
.next
;
525 static inline void page_set_slab(struct page
*page
, struct slab
*slab
)
527 page
->lru
.prev
= (struct list_head
*)slab
;
530 static inline struct slab
*page_get_slab(struct page
*page
)
532 BUG_ON(!PageSlab(page
));
533 return (struct slab
*)page
->lru
.prev
;
536 static inline struct kmem_cache
*virt_to_cache(const void *obj
)
538 struct page
*page
= virt_to_head_page(obj
);
539 return page_get_cache(page
);
542 static inline struct slab
*virt_to_slab(const void *obj
)
544 struct page
*page
= virt_to_head_page(obj
);
545 return page_get_slab(page
);
548 static inline void *index_to_obj(struct kmem_cache
*cache
, struct slab
*slab
,
551 return slab
->s_mem
+ cache
->buffer_size
* idx
;
555 * We want to avoid an expensive divide : (offset / cache->buffer_size)
556 * Using the fact that buffer_size is a constant for a particular cache,
557 * we can replace (offset / cache->buffer_size) by
558 * reciprocal_divide(offset, cache->reciprocal_buffer_size)
560 static inline unsigned int obj_to_index(const struct kmem_cache
*cache
,
561 const struct slab
*slab
, void *obj
)
563 u32 offset
= (obj
- slab
->s_mem
);
564 return reciprocal_divide(offset
, cache
->reciprocal_buffer_size
);
568 * These are the default caches for kmalloc. Custom caches can have other sizes.
570 struct cache_sizes malloc_sizes
[] = {
571 #define CACHE(x) { .cs_size = (x) },
572 #include <linux/kmalloc_sizes.h>
576 EXPORT_SYMBOL(malloc_sizes
);
578 /* Must match cache_sizes above. Out of line to keep cache footprint low. */
584 static struct cache_names __initdata cache_names
[] = {
585 #define CACHE(x) { .name = "size-" #x, .name_dma = "size-" #x "(DMA)" },
586 #include <linux/kmalloc_sizes.h>
591 static struct arraycache_init initarray_cache __initdata
=
592 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
593 static struct arraycache_init initarray_generic
=
594 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
596 /* internal cache of cache description objs */
597 static struct kmem_cache cache_cache
= {
599 .limit
= BOOT_CPUCACHE_ENTRIES
,
601 .buffer_size
= sizeof(struct kmem_cache
),
602 .name
= "kmem_cache",
605 #define BAD_ALIEN_MAGIC 0x01020304ul
607 #ifdef CONFIG_LOCKDEP
610 * Slab sometimes uses the kmalloc slabs to store the slab headers
611 * for other slabs "off slab".
612 * The locking for this is tricky in that it nests within the locks
613 * of all other slabs in a few places; to deal with this special
614 * locking we put on-slab caches into a separate lock-class.
616 * We set lock class for alien array caches which are up during init.
617 * The lock annotation will be lost if all cpus of a node goes down and
618 * then comes back up during hotplug
620 static struct lock_class_key on_slab_l3_key
;
621 static struct lock_class_key on_slab_alc_key
;
623 static inline void init_lock_keys(void)
627 struct cache_sizes
*s
= malloc_sizes
;
629 while (s
->cs_size
!= ULONG_MAX
) {
631 struct array_cache
**alc
;
633 struct kmem_list3
*l3
= s
->cs_cachep
->nodelists
[q
];
634 if (!l3
|| OFF_SLAB(s
->cs_cachep
))
636 lockdep_set_class(&l3
->list_lock
, &on_slab_l3_key
);
639 * FIXME: This check for BAD_ALIEN_MAGIC
640 * should go away when common slab code is taught to
641 * work even without alien caches.
642 * Currently, non NUMA code returns BAD_ALIEN_MAGIC
643 * for alloc_alien_cache,
645 if (!alc
|| (unsigned long)alc
== BAD_ALIEN_MAGIC
)
649 lockdep_set_class(&alc
[r
]->lock
,
657 static inline void init_lock_keys(void)
663 * Guard access to the cache-chain.
665 static DEFINE_MUTEX(cache_chain_mutex
);
666 static struct list_head cache_chain
;
669 * chicken and egg problem: delay the per-cpu array allocation
670 * until the general caches are up.
681 * used by boot code to determine if it can use slab based allocator
683 int slab_is_available(void)
685 return g_cpucache_up
>= EARLY
;
688 static DEFINE_PER_CPU(struct delayed_work
, reap_work
);
690 static inline struct array_cache
*cpu_cache_get(struct kmem_cache
*cachep
)
692 return cachep
->array
[smp_processor_id()];
695 static inline struct kmem_cache
*__find_general_cachep(size_t size
,
698 struct cache_sizes
*csizep
= malloc_sizes
;
701 /* This happens if someone tries to call
702 * kmem_cache_create(), or __kmalloc(), before
703 * the generic caches are initialized.
705 BUG_ON(malloc_sizes
[INDEX_AC
].cs_cachep
== NULL
);
708 return ZERO_SIZE_PTR
;
710 while (size
> csizep
->cs_size
)
714 * Really subtle: The last entry with cs->cs_size==ULONG_MAX
715 * has cs_{dma,}cachep==NULL. Thus no special case
716 * for large kmalloc calls required.
718 #ifdef CONFIG_ZONE_DMA
719 if (unlikely(gfpflags
& GFP_DMA
))
720 return csizep
->cs_dmacachep
;
722 return csizep
->cs_cachep
;
725 static struct kmem_cache
*kmem_find_general_cachep(size_t size
, gfp_t gfpflags
)
727 return __find_general_cachep(size
, gfpflags
);
730 static size_t slab_mgmt_size(size_t nr_objs
, size_t align
)
732 return ALIGN(sizeof(struct slab
)+nr_objs
*sizeof(kmem_bufctl_t
), align
);
736 * Calculate the number of objects and left-over bytes for a given buffer size.
738 static void cache_estimate(unsigned long gfporder
, size_t buffer_size
,
739 size_t align
, int flags
, size_t *left_over
,
744 size_t slab_size
= PAGE_SIZE
<< gfporder
;
747 * The slab management structure can be either off the slab or
748 * on it. For the latter case, the memory allocated for a
752 * - One kmem_bufctl_t for each object
753 * - Padding to respect alignment of @align
754 * - @buffer_size bytes for each object
756 * If the slab management structure is off the slab, then the
757 * alignment will already be calculated into the size. Because
758 * the slabs are all pages aligned, the objects will be at the
759 * correct alignment when allocated.
761 if (flags
& CFLGS_OFF_SLAB
) {
763 nr_objs
= slab_size
/ buffer_size
;
765 if (nr_objs
> SLAB_LIMIT
)
766 nr_objs
= SLAB_LIMIT
;
769 * Ignore padding for the initial guess. The padding
770 * is at most @align-1 bytes, and @buffer_size is at
771 * least @align. In the worst case, this result will
772 * be one greater than the number of objects that fit
773 * into the memory allocation when taking the padding
776 nr_objs
= (slab_size
- sizeof(struct slab
)) /
777 (buffer_size
+ sizeof(kmem_bufctl_t
));
780 * This calculated number will be either the right
781 * amount, or one greater than what we want.
783 if (slab_mgmt_size(nr_objs
, align
) + nr_objs
*buffer_size
787 if (nr_objs
> SLAB_LIMIT
)
788 nr_objs
= SLAB_LIMIT
;
790 mgmt_size
= slab_mgmt_size(nr_objs
, align
);
793 *left_over
= slab_size
- nr_objs
*buffer_size
- mgmt_size
;
796 #define slab_error(cachep, msg) __slab_error(__func__, cachep, msg)
798 static void __slab_error(const char *function
, struct kmem_cache
*cachep
,
801 printk(KERN_ERR
"slab error in %s(): cache `%s': %s\n",
802 function
, cachep
->name
, msg
);
807 * By default on NUMA we use alien caches to stage the freeing of
808 * objects allocated from other nodes. This causes massive memory
809 * inefficiencies when using fake NUMA setup to split memory into a
810 * large number of small nodes, so it can be disabled on the command
814 static int use_alien_caches __read_mostly
= 1;
815 static int __init
noaliencache_setup(char *s
)
817 use_alien_caches
= 0;
820 __setup("noaliencache", noaliencache_setup
);
824 * Special reaping functions for NUMA systems called from cache_reap().
825 * These take care of doing round robin flushing of alien caches (containing
826 * objects freed on different nodes from which they were allocated) and the
827 * flushing of remote pcps by calling drain_node_pages.
829 static DEFINE_PER_CPU(unsigned long, reap_node
);
831 static void init_reap_node(int cpu
)
835 node
= next_node(cpu_to_node(cpu
), node_online_map
);
836 if (node
== MAX_NUMNODES
)
837 node
= first_node(node_online_map
);
839 per_cpu(reap_node
, cpu
) = node
;
842 static void next_reap_node(void)
844 int node
= __get_cpu_var(reap_node
);
846 node
= next_node(node
, node_online_map
);
847 if (unlikely(node
>= MAX_NUMNODES
))
848 node
= first_node(node_online_map
);
849 __get_cpu_var(reap_node
) = node
;
853 #define init_reap_node(cpu) do { } while (0)
854 #define next_reap_node(void) do { } while (0)
858 * Initiate the reap timer running on the target CPU. We run at around 1 to 2Hz
859 * via the workqueue/eventd.
860 * Add the CPU number into the expiration time to minimize the possibility of
861 * the CPUs getting into lockstep and contending for the global cache chain
864 static void __cpuinit
start_cpu_timer(int cpu
)
866 struct delayed_work
*reap_work
= &per_cpu(reap_work
, cpu
);
869 * When this gets called from do_initcalls via cpucache_init(),
870 * init_workqueues() has already run, so keventd will be setup
873 if (keventd_up() && reap_work
->work
.func
== NULL
) {
875 INIT_DELAYED_WORK(reap_work
, cache_reap
);
876 schedule_delayed_work_on(cpu
, reap_work
,
877 __round_jiffies_relative(HZ
, cpu
));
881 static struct array_cache
*alloc_arraycache(int node
, int entries
,
882 int batchcount
, gfp_t gfp
)
884 int memsize
= sizeof(void *) * entries
+ sizeof(struct array_cache
);
885 struct array_cache
*nc
= NULL
;
887 nc
= kmalloc_node(memsize
, gfp
, node
);
889 * The array_cache structures contain pointers to free object.
890 * However, when such objects are allocated or transfered to another
891 * cache the pointers are not cleared and they could be counted as
892 * valid references during a kmemleak scan. Therefore, kmemleak must
893 * not scan such objects.
895 kmemleak_no_scan(nc
);
899 nc
->batchcount
= batchcount
;
901 spin_lock_init(&nc
->lock
);
907 * Transfer objects in one arraycache to another.
908 * Locking must be handled by the caller.
910 * Return the number of entries transferred.
912 static int transfer_objects(struct array_cache
*to
,
913 struct array_cache
*from
, unsigned int max
)
915 /* Figure out how many entries to transfer */
916 int nr
= min(min(from
->avail
, max
), to
->limit
- to
->avail
);
921 memcpy(to
->entry
+ to
->avail
, from
->entry
+ from
->avail
-nr
,
932 #define drain_alien_cache(cachep, alien) do { } while (0)
933 #define reap_alien(cachep, l3) do { } while (0)
935 static inline struct array_cache
**alloc_alien_cache(int node
, int limit
, gfp_t gfp
)
937 return (struct array_cache
**)BAD_ALIEN_MAGIC
;
940 static inline void free_alien_cache(struct array_cache
**ac_ptr
)
944 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
949 static inline void *alternate_node_alloc(struct kmem_cache
*cachep
,
955 static inline void *____cache_alloc_node(struct kmem_cache
*cachep
,
956 gfp_t flags
, int nodeid
)
961 #else /* CONFIG_NUMA */
963 static void *____cache_alloc_node(struct kmem_cache
*, gfp_t
, int);
964 static void *alternate_node_alloc(struct kmem_cache
*, gfp_t
);
966 static struct array_cache
**alloc_alien_cache(int node
, int limit
, gfp_t gfp
)
968 struct array_cache
**ac_ptr
;
969 int memsize
= sizeof(void *) * nr_node_ids
;
974 ac_ptr
= kzalloc_node(memsize
, gfp
, node
);
977 if (i
== node
|| !node_online(i
))
979 ac_ptr
[i
] = alloc_arraycache(node
, limit
, 0xbaadf00d, gfp
);
981 for (i
--; i
>= 0; i
--)
991 static void free_alien_cache(struct array_cache
**ac_ptr
)
1002 static void __drain_alien_cache(struct kmem_cache
*cachep
,
1003 struct array_cache
*ac
, int node
)
1005 struct kmem_list3
*rl3
= cachep
->nodelists
[node
];
1008 spin_lock(&rl3
->list_lock
);
1010 * Stuff objects into the remote nodes shared array first.
1011 * That way we could avoid the overhead of putting the objects
1012 * into the free lists and getting them back later.
1015 transfer_objects(rl3
->shared
, ac
, ac
->limit
);
1017 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
1019 spin_unlock(&rl3
->list_lock
);
1024 * Called from cache_reap() to regularly drain alien caches round robin.
1026 static void reap_alien(struct kmem_cache
*cachep
, struct kmem_list3
*l3
)
1028 int node
= __get_cpu_var(reap_node
);
1031 struct array_cache
*ac
= l3
->alien
[node
];
1033 if (ac
&& ac
->avail
&& spin_trylock_irq(&ac
->lock
)) {
1034 __drain_alien_cache(cachep
, ac
, node
);
1035 spin_unlock_irq(&ac
->lock
);
1040 static void drain_alien_cache(struct kmem_cache
*cachep
,
1041 struct array_cache
**alien
)
1044 struct array_cache
*ac
;
1045 unsigned long flags
;
1047 for_each_online_node(i
) {
1050 spin_lock_irqsave(&ac
->lock
, flags
);
1051 __drain_alien_cache(cachep
, ac
, i
);
1052 spin_unlock_irqrestore(&ac
->lock
, flags
);
1057 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
1059 struct slab
*slabp
= virt_to_slab(objp
);
1060 int nodeid
= slabp
->nodeid
;
1061 struct kmem_list3
*l3
;
1062 struct array_cache
*alien
= NULL
;
1065 node
= numa_node_id();
1068 * Make sure we are not freeing a object from another node to the array
1069 * cache on this cpu.
1071 if (likely(slabp
->nodeid
== node
))
1074 l3
= cachep
->nodelists
[node
];
1075 STATS_INC_NODEFREES(cachep
);
1076 if (l3
->alien
&& l3
->alien
[nodeid
]) {
1077 alien
= l3
->alien
[nodeid
];
1078 spin_lock(&alien
->lock
);
1079 if (unlikely(alien
->avail
== alien
->limit
)) {
1080 STATS_INC_ACOVERFLOW(cachep
);
1081 __drain_alien_cache(cachep
, alien
, nodeid
);
1083 alien
->entry
[alien
->avail
++] = objp
;
1084 spin_unlock(&alien
->lock
);
1086 spin_lock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1087 free_block(cachep
, &objp
, 1, nodeid
);
1088 spin_unlock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1094 static void __cpuinit
cpuup_canceled(long cpu
)
1096 struct kmem_cache
*cachep
;
1097 struct kmem_list3
*l3
= NULL
;
1098 int node
= cpu_to_node(cpu
);
1099 const struct cpumask
*mask
= cpumask_of_node(node
);
1101 list_for_each_entry(cachep
, &cache_chain
, next
) {
1102 struct array_cache
*nc
;
1103 struct array_cache
*shared
;
1104 struct array_cache
**alien
;
1106 /* cpu is dead; no one can alloc from it. */
1107 nc
= cachep
->array
[cpu
];
1108 cachep
->array
[cpu
] = NULL
;
1109 l3
= cachep
->nodelists
[node
];
1112 goto free_array_cache
;
1114 spin_lock_irq(&l3
->list_lock
);
1116 /* Free limit for this kmem_list3 */
1117 l3
->free_limit
-= cachep
->batchcount
;
1119 free_block(cachep
, nc
->entry
, nc
->avail
, node
);
1121 if (!cpus_empty(*mask
)) {
1122 spin_unlock_irq(&l3
->list_lock
);
1123 goto free_array_cache
;
1126 shared
= l3
->shared
;
1128 free_block(cachep
, shared
->entry
,
1129 shared
->avail
, node
);
1136 spin_unlock_irq(&l3
->list_lock
);
1140 drain_alien_cache(cachep
, alien
);
1141 free_alien_cache(alien
);
1147 * In the previous loop, all the objects were freed to
1148 * the respective cache's slabs, now we can go ahead and
1149 * shrink each nodelist to its limit.
1151 list_for_each_entry(cachep
, &cache_chain
, next
) {
1152 l3
= cachep
->nodelists
[node
];
1155 drain_freelist(cachep
, l3
, l3
->free_objects
);
1159 static int __cpuinit
cpuup_prepare(long cpu
)
1161 struct kmem_cache
*cachep
;
1162 struct kmem_list3
*l3
= NULL
;
1163 int node
= cpu_to_node(cpu
);
1164 const int memsize
= sizeof(struct kmem_list3
);
1167 * We need to do this right in the beginning since
1168 * alloc_arraycache's are going to use this list.
1169 * kmalloc_node allows us to add the slab to the right
1170 * kmem_list3 and not this cpu's kmem_list3
1173 list_for_each_entry(cachep
, &cache_chain
, next
) {
1175 * Set up the size64 kmemlist for cpu before we can
1176 * begin anything. Make sure some other cpu on this
1177 * node has not already allocated this
1179 if (!cachep
->nodelists
[node
]) {
1180 l3
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
1183 kmem_list3_init(l3
);
1184 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
1185 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1188 * The l3s don't come and go as CPUs come and
1189 * go. cache_chain_mutex is sufficient
1192 cachep
->nodelists
[node
] = l3
;
1195 spin_lock_irq(&cachep
->nodelists
[node
]->list_lock
);
1196 cachep
->nodelists
[node
]->free_limit
=
1197 (1 + nr_cpus_node(node
)) *
1198 cachep
->batchcount
+ cachep
->num
;
1199 spin_unlock_irq(&cachep
->nodelists
[node
]->list_lock
);
1203 * Now we can go ahead with allocating the shared arrays and
1206 list_for_each_entry(cachep
, &cache_chain
, next
) {
1207 struct array_cache
*nc
;
1208 struct array_cache
*shared
= NULL
;
1209 struct array_cache
**alien
= NULL
;
1211 nc
= alloc_arraycache(node
, cachep
->limit
,
1212 cachep
->batchcount
, GFP_KERNEL
);
1215 if (cachep
->shared
) {
1216 shared
= alloc_arraycache(node
,
1217 cachep
->shared
* cachep
->batchcount
,
1218 0xbaadf00d, GFP_KERNEL
);
1224 if (use_alien_caches
) {
1225 alien
= alloc_alien_cache(node
, cachep
->limit
, GFP_KERNEL
);
1232 cachep
->array
[cpu
] = nc
;
1233 l3
= cachep
->nodelists
[node
];
1236 spin_lock_irq(&l3
->list_lock
);
1239 * We are serialised from CPU_DEAD or
1240 * CPU_UP_CANCELLED by the cpucontrol lock
1242 l3
->shared
= shared
;
1251 spin_unlock_irq(&l3
->list_lock
);
1253 free_alien_cache(alien
);
1257 cpuup_canceled(cpu
);
1261 static int __cpuinit
cpuup_callback(struct notifier_block
*nfb
,
1262 unsigned long action
, void *hcpu
)
1264 long cpu
= (long)hcpu
;
1268 case CPU_UP_PREPARE
:
1269 case CPU_UP_PREPARE_FROZEN
:
1270 mutex_lock(&cache_chain_mutex
);
1271 err
= cpuup_prepare(cpu
);
1272 mutex_unlock(&cache_chain_mutex
);
1275 case CPU_ONLINE_FROZEN
:
1276 start_cpu_timer(cpu
);
1278 #ifdef CONFIG_HOTPLUG_CPU
1279 case CPU_DOWN_PREPARE
:
1280 case CPU_DOWN_PREPARE_FROZEN
:
1282 * Shutdown cache reaper. Note that the cache_chain_mutex is
1283 * held so that if cache_reap() is invoked it cannot do
1284 * anything expensive but will only modify reap_work
1285 * and reschedule the timer.
1287 cancel_rearming_delayed_work(&per_cpu(reap_work
, cpu
));
1288 /* Now the cache_reaper is guaranteed to be not running. */
1289 per_cpu(reap_work
, cpu
).work
.func
= NULL
;
1291 case CPU_DOWN_FAILED
:
1292 case CPU_DOWN_FAILED_FROZEN
:
1293 start_cpu_timer(cpu
);
1296 case CPU_DEAD_FROZEN
:
1298 * Even if all the cpus of a node are down, we don't free the
1299 * kmem_list3 of any cache. This to avoid a race between
1300 * cpu_down, and a kmalloc allocation from another cpu for
1301 * memory from the node of the cpu going down. The list3
1302 * structure is usually allocated from kmem_cache_create() and
1303 * gets destroyed at kmem_cache_destroy().
1307 case CPU_UP_CANCELED
:
1308 case CPU_UP_CANCELED_FROZEN
:
1309 mutex_lock(&cache_chain_mutex
);
1310 cpuup_canceled(cpu
);
1311 mutex_unlock(&cache_chain_mutex
);
1314 return err
? NOTIFY_BAD
: NOTIFY_OK
;
1317 static struct notifier_block __cpuinitdata cpucache_notifier
= {
1318 &cpuup_callback
, NULL
, 0
1322 * swap the static kmem_list3 with kmalloced memory
1324 static void init_list(struct kmem_cache
*cachep
, struct kmem_list3
*list
,
1327 struct kmem_list3
*ptr
;
1329 ptr
= kmalloc_node(sizeof(struct kmem_list3
), GFP_NOWAIT
, nodeid
);
1332 memcpy(ptr
, list
, sizeof(struct kmem_list3
));
1334 * Do not assume that spinlocks can be initialized via memcpy:
1336 spin_lock_init(&ptr
->list_lock
);
1338 MAKE_ALL_LISTS(cachep
, ptr
, nodeid
);
1339 cachep
->nodelists
[nodeid
] = ptr
;
1343 * For setting up all the kmem_list3s for cache whose buffer_size is same as
1344 * size of kmem_list3.
1346 static void __init
set_up_list3s(struct kmem_cache
*cachep
, int index
)
1350 for_each_online_node(node
) {
1351 cachep
->nodelists
[node
] = &initkmem_list3
[index
+ node
];
1352 cachep
->nodelists
[node
]->next_reap
= jiffies
+
1354 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1359 * Initialisation. Called after the page allocator have been initialised and
1360 * before smp_init().
1362 void __init
kmem_cache_init(void)
1365 struct cache_sizes
*sizes
;
1366 struct cache_names
*names
;
1371 if (num_possible_nodes() == 1)
1372 use_alien_caches
= 0;
1374 for (i
= 0; i
< NUM_INIT_LISTS
; i
++) {
1375 kmem_list3_init(&initkmem_list3
[i
]);
1376 if (i
< MAX_NUMNODES
)
1377 cache_cache
.nodelists
[i
] = NULL
;
1379 set_up_list3s(&cache_cache
, CACHE_CACHE
);
1382 * Fragmentation resistance on low memory - only use bigger
1383 * page orders on machines with more than 32MB of memory.
1385 if (totalram_pages
> (32 << 20) >> PAGE_SHIFT
)
1386 slab_break_gfp_order
= BREAK_GFP_ORDER_HI
;
1388 /* Bootstrap is tricky, because several objects are allocated
1389 * from caches that do not exist yet:
1390 * 1) initialize the cache_cache cache: it contains the struct
1391 * kmem_cache structures of all caches, except cache_cache itself:
1392 * cache_cache is statically allocated.
1393 * Initially an __init data area is used for the head array and the
1394 * kmem_list3 structures, it's replaced with a kmalloc allocated
1395 * array at the end of the bootstrap.
1396 * 2) Create the first kmalloc cache.
1397 * The struct kmem_cache for the new cache is allocated normally.
1398 * An __init data area is used for the head array.
1399 * 3) Create the remaining kmalloc caches, with minimally sized
1401 * 4) Replace the __init data head arrays for cache_cache and the first
1402 * kmalloc cache with kmalloc allocated arrays.
1403 * 5) Replace the __init data for kmem_list3 for cache_cache and
1404 * the other cache's with kmalloc allocated memory.
1405 * 6) Resize the head arrays of the kmalloc caches to their final sizes.
1408 node
= numa_node_id();
1410 /* 1) create the cache_cache */
1411 INIT_LIST_HEAD(&cache_chain
);
1412 list_add(&cache_cache
.next
, &cache_chain
);
1413 cache_cache
.colour_off
= cache_line_size();
1414 cache_cache
.array
[smp_processor_id()] = &initarray_cache
.cache
;
1415 cache_cache
.nodelists
[node
] = &initkmem_list3
[CACHE_CACHE
+ node
];
1418 * struct kmem_cache size depends on nr_node_ids, which
1419 * can be less than MAX_NUMNODES.
1421 cache_cache
.buffer_size
= offsetof(struct kmem_cache
, nodelists
) +
1422 nr_node_ids
* sizeof(struct kmem_list3
*);
1424 cache_cache
.obj_size
= cache_cache
.buffer_size
;
1426 cache_cache
.buffer_size
= ALIGN(cache_cache
.buffer_size
,
1428 cache_cache
.reciprocal_buffer_size
=
1429 reciprocal_value(cache_cache
.buffer_size
);
1431 for (order
= 0; order
< MAX_ORDER
; order
++) {
1432 cache_estimate(order
, cache_cache
.buffer_size
,
1433 cache_line_size(), 0, &left_over
, &cache_cache
.num
);
1434 if (cache_cache
.num
)
1437 BUG_ON(!cache_cache
.num
);
1438 cache_cache
.gfporder
= order
;
1439 cache_cache
.colour
= left_over
/ cache_cache
.colour_off
;
1440 cache_cache
.slab_size
= ALIGN(cache_cache
.num
* sizeof(kmem_bufctl_t
) +
1441 sizeof(struct slab
), cache_line_size());
1443 /* 2+3) create the kmalloc caches */
1444 sizes
= malloc_sizes
;
1445 names
= cache_names
;
1448 * Initialize the caches that provide memory for the array cache and the
1449 * kmem_list3 structures first. Without this, further allocations will
1453 sizes
[INDEX_AC
].cs_cachep
= kmem_cache_create(names
[INDEX_AC
].name
,
1454 sizes
[INDEX_AC
].cs_size
,
1455 ARCH_KMALLOC_MINALIGN
,
1456 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1459 if (INDEX_AC
!= INDEX_L3
) {
1460 sizes
[INDEX_L3
].cs_cachep
=
1461 kmem_cache_create(names
[INDEX_L3
].name
,
1462 sizes
[INDEX_L3
].cs_size
,
1463 ARCH_KMALLOC_MINALIGN
,
1464 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1468 slab_early_init
= 0;
1470 while (sizes
->cs_size
!= ULONG_MAX
) {
1472 * For performance, all the general caches are L1 aligned.
1473 * This should be particularly beneficial on SMP boxes, as it
1474 * eliminates "false sharing".
1475 * Note for systems short on memory removing the alignment will
1476 * allow tighter packing of the smaller caches.
1478 if (!sizes
->cs_cachep
) {
1479 sizes
->cs_cachep
= kmem_cache_create(names
->name
,
1481 ARCH_KMALLOC_MINALIGN
,
1482 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1485 #ifdef CONFIG_ZONE_DMA
1486 sizes
->cs_dmacachep
= kmem_cache_create(
1489 ARCH_KMALLOC_MINALIGN
,
1490 ARCH_KMALLOC_FLAGS
|SLAB_CACHE_DMA
|
1497 /* 4) Replace the bootstrap head arrays */
1499 struct array_cache
*ptr
;
1501 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_NOWAIT
);
1503 BUG_ON(cpu_cache_get(&cache_cache
) != &initarray_cache
.cache
);
1504 memcpy(ptr
, cpu_cache_get(&cache_cache
),
1505 sizeof(struct arraycache_init
));
1507 * Do not assume that spinlocks can be initialized via memcpy:
1509 spin_lock_init(&ptr
->lock
);
1511 cache_cache
.array
[smp_processor_id()] = ptr
;
1513 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_NOWAIT
);
1515 BUG_ON(cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
)
1516 != &initarray_generic
.cache
);
1517 memcpy(ptr
, cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
),
1518 sizeof(struct arraycache_init
));
1520 * Do not assume that spinlocks can be initialized via memcpy:
1522 spin_lock_init(&ptr
->lock
);
1524 malloc_sizes
[INDEX_AC
].cs_cachep
->array
[smp_processor_id()] =
1527 /* 5) Replace the bootstrap kmem_list3's */
1531 for_each_online_node(nid
) {
1532 init_list(&cache_cache
, &initkmem_list3
[CACHE_CACHE
+ nid
], nid
);
1534 init_list(malloc_sizes
[INDEX_AC
].cs_cachep
,
1535 &initkmem_list3
[SIZE_AC
+ nid
], nid
);
1537 if (INDEX_AC
!= INDEX_L3
) {
1538 init_list(malloc_sizes
[INDEX_L3
].cs_cachep
,
1539 &initkmem_list3
[SIZE_L3
+ nid
], nid
);
1544 g_cpucache_up
= EARLY
;
1547 void __init
kmem_cache_init_late(void)
1549 struct kmem_cache
*cachep
;
1551 /* 6) resize the head arrays to their final sizes */
1552 mutex_lock(&cache_chain_mutex
);
1553 list_for_each_entry(cachep
, &cache_chain
, next
)
1554 if (enable_cpucache(cachep
, GFP_NOWAIT
))
1556 mutex_unlock(&cache_chain_mutex
);
1559 g_cpucache_up
= FULL
;
1561 /* Annotate slab for lockdep -- annotate the malloc caches */
1565 * Register a cpu startup notifier callback that initializes
1566 * cpu_cache_get for all new cpus
1568 register_cpu_notifier(&cpucache_notifier
);
1571 * The reap timers are started later, with a module init call: That part
1572 * of the kernel is not yet operational.
1576 static int __init
cpucache_init(void)
1581 * Register the timers that return unneeded pages to the page allocator
1583 for_each_online_cpu(cpu
)
1584 start_cpu_timer(cpu
);
1587 __initcall(cpucache_init
);
1590 * Interface to system's page allocator. No need to hold the cache-lock.
1592 * If we requested dmaable memory, we will get it. Even if we
1593 * did not request dmaable memory, we might get it, but that
1594 * would be relatively rare and ignorable.
1596 static void *kmem_getpages(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
1604 * Nommu uses slab's for process anonymous memory allocations, and thus
1605 * requires __GFP_COMP to properly refcount higher order allocations
1607 flags
|= __GFP_COMP
;
1610 flags
|= cachep
->gfpflags
;
1611 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1612 flags
|= __GFP_RECLAIMABLE
;
1614 page
= alloc_pages_exact_node(nodeid
, flags
| __GFP_NOTRACK
, cachep
->gfporder
);
1618 nr_pages
= (1 << cachep
->gfporder
);
1619 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1620 add_zone_page_state(page_zone(page
),
1621 NR_SLAB_RECLAIMABLE
, nr_pages
);
1623 add_zone_page_state(page_zone(page
),
1624 NR_SLAB_UNRECLAIMABLE
, nr_pages
);
1625 for (i
= 0; i
< nr_pages
; i
++)
1626 __SetPageSlab(page
+ i
);
1628 if (kmemcheck_enabled
&& !(cachep
->flags
& SLAB_NOTRACK
)) {
1629 kmemcheck_alloc_shadow(page
, cachep
->gfporder
, flags
, nodeid
);
1632 kmemcheck_mark_uninitialized_pages(page
, nr_pages
);
1634 kmemcheck_mark_unallocated_pages(page
, nr_pages
);
1637 return page_address(page
);
1641 * Interface to system's page release.
1643 static void kmem_freepages(struct kmem_cache
*cachep
, void *addr
)
1645 unsigned long i
= (1 << cachep
->gfporder
);
1646 struct page
*page
= virt_to_page(addr
);
1647 const unsigned long nr_freed
= i
;
1649 kmemcheck_free_shadow(page
, cachep
->gfporder
);
1651 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1652 sub_zone_page_state(page_zone(page
),
1653 NR_SLAB_RECLAIMABLE
, nr_freed
);
1655 sub_zone_page_state(page_zone(page
),
1656 NR_SLAB_UNRECLAIMABLE
, nr_freed
);
1658 BUG_ON(!PageSlab(page
));
1659 __ClearPageSlab(page
);
1662 if (current
->reclaim_state
)
1663 current
->reclaim_state
->reclaimed_slab
+= nr_freed
;
1664 free_pages((unsigned long)addr
, cachep
->gfporder
);
1667 static void kmem_rcu_free(struct rcu_head
*head
)
1669 struct slab_rcu
*slab_rcu
= (struct slab_rcu
*)head
;
1670 struct kmem_cache
*cachep
= slab_rcu
->cachep
;
1672 kmem_freepages(cachep
, slab_rcu
->addr
);
1673 if (OFF_SLAB(cachep
))
1674 kmem_cache_free(cachep
->slabp_cache
, slab_rcu
);
1679 #ifdef CONFIG_DEBUG_PAGEALLOC
1680 static void store_stackinfo(struct kmem_cache
*cachep
, unsigned long *addr
,
1681 unsigned long caller
)
1683 int size
= obj_size(cachep
);
1685 addr
= (unsigned long *)&((char *)addr
)[obj_offset(cachep
)];
1687 if (size
< 5 * sizeof(unsigned long))
1690 *addr
++ = 0x12345678;
1692 *addr
++ = smp_processor_id();
1693 size
-= 3 * sizeof(unsigned long);
1695 unsigned long *sptr
= &caller
;
1696 unsigned long svalue
;
1698 while (!kstack_end(sptr
)) {
1700 if (kernel_text_address(svalue
)) {
1702 size
-= sizeof(unsigned long);
1703 if (size
<= sizeof(unsigned long))
1709 *addr
++ = 0x87654321;
1713 static void poison_obj(struct kmem_cache
*cachep
, void *addr
, unsigned char val
)
1715 int size
= obj_size(cachep
);
1716 addr
= &((char *)addr
)[obj_offset(cachep
)];
1718 memset(addr
, val
, size
);
1719 *(unsigned char *)(addr
+ size
- 1) = POISON_END
;
1722 static void dump_line(char *data
, int offset
, int limit
)
1725 unsigned char error
= 0;
1728 printk(KERN_ERR
"%03x:", offset
);
1729 for (i
= 0; i
< limit
; i
++) {
1730 if (data
[offset
+ i
] != POISON_FREE
) {
1731 error
= data
[offset
+ i
];
1734 printk(" %02x", (unsigned char)data
[offset
+ i
]);
1738 if (bad_count
== 1) {
1739 error
^= POISON_FREE
;
1740 if (!(error
& (error
- 1))) {
1741 printk(KERN_ERR
"Single bit error detected. Probably "
1744 printk(KERN_ERR
"Run memtest86+ or a similar memory "
1747 printk(KERN_ERR
"Run a memory test tool.\n");
1756 static void print_objinfo(struct kmem_cache
*cachep
, void *objp
, int lines
)
1761 if (cachep
->flags
& SLAB_RED_ZONE
) {
1762 printk(KERN_ERR
"Redzone: 0x%llx/0x%llx.\n",
1763 *dbg_redzone1(cachep
, objp
),
1764 *dbg_redzone2(cachep
, objp
));
1767 if (cachep
->flags
& SLAB_STORE_USER
) {
1768 printk(KERN_ERR
"Last user: [<%p>]",
1769 *dbg_userword(cachep
, objp
));
1770 print_symbol("(%s)",
1771 (unsigned long)*dbg_userword(cachep
, objp
));
1774 realobj
= (char *)objp
+ obj_offset(cachep
);
1775 size
= obj_size(cachep
);
1776 for (i
= 0; i
< size
&& lines
; i
+= 16, lines
--) {
1779 if (i
+ limit
> size
)
1781 dump_line(realobj
, i
, limit
);
1785 static void check_poison_obj(struct kmem_cache
*cachep
, void *objp
)
1791 realobj
= (char *)objp
+ obj_offset(cachep
);
1792 size
= obj_size(cachep
);
1794 for (i
= 0; i
< size
; i
++) {
1795 char exp
= POISON_FREE
;
1798 if (realobj
[i
] != exp
) {
1804 "Slab corruption: %s start=%p, len=%d\n",
1805 cachep
->name
, realobj
, size
);
1806 print_objinfo(cachep
, objp
, 0);
1808 /* Hexdump the affected line */
1811 if (i
+ limit
> size
)
1813 dump_line(realobj
, i
, limit
);
1816 /* Limit to 5 lines */
1822 /* Print some data about the neighboring objects, if they
1825 struct slab
*slabp
= virt_to_slab(objp
);
1828 objnr
= obj_to_index(cachep
, slabp
, objp
);
1830 objp
= index_to_obj(cachep
, slabp
, objnr
- 1);
1831 realobj
= (char *)objp
+ obj_offset(cachep
);
1832 printk(KERN_ERR
"Prev obj: start=%p, len=%d\n",
1834 print_objinfo(cachep
, objp
, 2);
1836 if (objnr
+ 1 < cachep
->num
) {
1837 objp
= index_to_obj(cachep
, slabp
, objnr
+ 1);
1838 realobj
= (char *)objp
+ obj_offset(cachep
);
1839 printk(KERN_ERR
"Next obj: start=%p, len=%d\n",
1841 print_objinfo(cachep
, objp
, 2);
1848 static void slab_destroy_debugcheck(struct kmem_cache
*cachep
, struct slab
*slabp
)
1851 for (i
= 0; i
< cachep
->num
; i
++) {
1852 void *objp
= index_to_obj(cachep
, slabp
, i
);
1854 if (cachep
->flags
& SLAB_POISON
) {
1855 #ifdef CONFIG_DEBUG_PAGEALLOC
1856 if (cachep
->buffer_size
% PAGE_SIZE
== 0 &&
1858 kernel_map_pages(virt_to_page(objp
),
1859 cachep
->buffer_size
/ PAGE_SIZE
, 1);
1861 check_poison_obj(cachep
, objp
);
1863 check_poison_obj(cachep
, objp
);
1866 if (cachep
->flags
& SLAB_RED_ZONE
) {
1867 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
1868 slab_error(cachep
, "start of a freed object "
1870 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
1871 slab_error(cachep
, "end of a freed object "
1877 static void slab_destroy_debugcheck(struct kmem_cache
*cachep
, struct slab
*slabp
)
1883 * slab_destroy - destroy and release all objects in a slab
1884 * @cachep: cache pointer being destroyed
1885 * @slabp: slab pointer being destroyed
1887 * Destroy all the objs in a slab, and release the mem back to the system.
1888 * Before calling the slab must have been unlinked from the cache. The
1889 * cache-lock is not held/needed.
1891 static void slab_destroy(struct kmem_cache
*cachep
, struct slab
*slabp
)
1893 void *addr
= slabp
->s_mem
- slabp
->colouroff
;
1895 slab_destroy_debugcheck(cachep
, slabp
);
1896 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
)) {
1897 struct slab_rcu
*slab_rcu
;
1899 slab_rcu
= (struct slab_rcu
*)slabp
;
1900 slab_rcu
->cachep
= cachep
;
1901 slab_rcu
->addr
= addr
;
1902 call_rcu(&slab_rcu
->head
, kmem_rcu_free
);
1904 kmem_freepages(cachep
, addr
);
1905 if (OFF_SLAB(cachep
))
1906 kmem_cache_free(cachep
->slabp_cache
, slabp
);
1910 static void __kmem_cache_destroy(struct kmem_cache
*cachep
)
1913 struct kmem_list3
*l3
;
1915 for_each_online_cpu(i
)
1916 kfree(cachep
->array
[i
]);
1918 /* NUMA: free the list3 structures */
1919 for_each_online_node(i
) {
1920 l3
= cachep
->nodelists
[i
];
1923 free_alien_cache(l3
->alien
);
1927 kmem_cache_free(&cache_cache
, cachep
);
1932 * calculate_slab_order - calculate size (page order) of slabs
1933 * @cachep: pointer to the cache that is being created
1934 * @size: size of objects to be created in this cache.
1935 * @align: required alignment for the objects.
1936 * @flags: slab allocation flags
1938 * Also calculates the number of objects per slab.
1940 * This could be made much more intelligent. For now, try to avoid using
1941 * high order pages for slabs. When the gfp() functions are more friendly
1942 * towards high-order requests, this should be changed.
1944 static size_t calculate_slab_order(struct kmem_cache
*cachep
,
1945 size_t size
, size_t align
, unsigned long flags
)
1947 unsigned long offslab_limit
;
1948 size_t left_over
= 0;
1951 for (gfporder
= 0; gfporder
<= KMALLOC_MAX_ORDER
; gfporder
++) {
1955 cache_estimate(gfporder
, size
, align
, flags
, &remainder
, &num
);
1959 if (flags
& CFLGS_OFF_SLAB
) {
1961 * Max number of objs-per-slab for caches which
1962 * use off-slab slabs. Needed to avoid a possible
1963 * looping condition in cache_grow().
1965 offslab_limit
= size
- sizeof(struct slab
);
1966 offslab_limit
/= sizeof(kmem_bufctl_t
);
1968 if (num
> offslab_limit
)
1972 /* Found something acceptable - save it away */
1974 cachep
->gfporder
= gfporder
;
1975 left_over
= remainder
;
1978 * A VFS-reclaimable slab tends to have most allocations
1979 * as GFP_NOFS and we really don't want to have to be allocating
1980 * higher-order pages when we are unable to shrink dcache.
1982 if (flags
& SLAB_RECLAIM_ACCOUNT
)
1986 * Large number of objects is good, but very large slabs are
1987 * currently bad for the gfp()s.
1989 if (gfporder
>= slab_break_gfp_order
)
1993 * Acceptable internal fragmentation?
1995 if (left_over
* 8 <= (PAGE_SIZE
<< gfporder
))
2001 static int __init_refok
setup_cpu_cache(struct kmem_cache
*cachep
, gfp_t gfp
)
2003 if (g_cpucache_up
== FULL
)
2004 return enable_cpucache(cachep
, gfp
);
2006 if (g_cpucache_up
== NONE
) {
2008 * Note: the first kmem_cache_create must create the cache
2009 * that's used by kmalloc(24), otherwise the creation of
2010 * further caches will BUG().
2012 cachep
->array
[smp_processor_id()] = &initarray_generic
.cache
;
2015 * If the cache that's used by kmalloc(sizeof(kmem_list3)) is
2016 * the first cache, then we need to set up all its list3s,
2017 * otherwise the creation of further caches will BUG().
2019 set_up_list3s(cachep
, SIZE_AC
);
2020 if (INDEX_AC
== INDEX_L3
)
2021 g_cpucache_up
= PARTIAL_L3
;
2023 g_cpucache_up
= PARTIAL_AC
;
2025 cachep
->array
[smp_processor_id()] =
2026 kmalloc(sizeof(struct arraycache_init
), gfp
);
2028 if (g_cpucache_up
== PARTIAL_AC
) {
2029 set_up_list3s(cachep
, SIZE_L3
);
2030 g_cpucache_up
= PARTIAL_L3
;
2033 for_each_online_node(node
) {
2034 cachep
->nodelists
[node
] =
2035 kmalloc_node(sizeof(struct kmem_list3
),
2037 BUG_ON(!cachep
->nodelists
[node
]);
2038 kmem_list3_init(cachep
->nodelists
[node
]);
2042 cachep
->nodelists
[numa_node_id()]->next_reap
=
2043 jiffies
+ REAPTIMEOUT_LIST3
+
2044 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
2046 cpu_cache_get(cachep
)->avail
= 0;
2047 cpu_cache_get(cachep
)->limit
= BOOT_CPUCACHE_ENTRIES
;
2048 cpu_cache_get(cachep
)->batchcount
= 1;
2049 cpu_cache_get(cachep
)->touched
= 0;
2050 cachep
->batchcount
= 1;
2051 cachep
->limit
= BOOT_CPUCACHE_ENTRIES
;
2056 * kmem_cache_create - Create a cache.
2057 * @name: A string which is used in /proc/slabinfo to identify this cache.
2058 * @size: The size of objects to be created in this cache.
2059 * @align: The required alignment for the objects.
2060 * @flags: SLAB flags
2061 * @ctor: A constructor for the objects.
2063 * Returns a ptr to the cache on success, NULL on failure.
2064 * Cannot be called within a int, but can be interrupted.
2065 * The @ctor is run when new pages are allocated by the cache.
2067 * @name must be valid until the cache is destroyed. This implies that
2068 * the module calling this has to destroy the cache before getting unloaded.
2069 * Note that kmem_cache_name() is not guaranteed to return the same pointer,
2070 * therefore applications must manage it themselves.
2074 * %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
2075 * to catch references to uninitialised memory.
2077 * %SLAB_RED_ZONE - Insert `Red' zones around the allocated memory to check
2078 * for buffer overruns.
2080 * %SLAB_HWCACHE_ALIGN - Align the objects in this cache to a hardware
2081 * cacheline. This can be beneficial if you're counting cycles as closely
2085 kmem_cache_create (const char *name
, size_t size
, size_t align
,
2086 unsigned long flags
, void (*ctor
)(void *))
2088 size_t left_over
, slab_size
, ralign
;
2089 struct kmem_cache
*cachep
= NULL
, *pc
;
2093 * Sanity checks... these are all serious usage bugs.
2095 if (!name
|| in_interrupt() || (size
< BYTES_PER_WORD
) ||
2096 size
> KMALLOC_MAX_SIZE
) {
2097 printk(KERN_ERR
"%s: Early error in slab %s\n", __func__
,
2103 * We use cache_chain_mutex to ensure a consistent view of
2104 * cpu_online_mask as well. Please see cpuup_callback
2106 if (slab_is_available()) {
2108 mutex_lock(&cache_chain_mutex
);
2111 list_for_each_entry(pc
, &cache_chain
, next
) {
2116 * This happens when the module gets unloaded and doesn't
2117 * destroy its slab cache and no-one else reuses the vmalloc
2118 * area of the module. Print a warning.
2120 res
= probe_kernel_address(pc
->name
, tmp
);
2123 "SLAB: cache with size %d has lost its name\n",
2128 if (!strcmp(pc
->name
, name
)) {
2130 "kmem_cache_create: duplicate cache %s\n", name
);
2137 WARN_ON(strchr(name
, ' ')); /* It confuses parsers */
2140 * Enable redzoning and last user accounting, except for caches with
2141 * large objects, if the increased size would increase the object size
2142 * above the next power of two: caches with object sizes just above a
2143 * power of two have a significant amount of internal fragmentation.
2145 if (size
< 4096 || fls(size
- 1) == fls(size
-1 + REDZONE_ALIGN
+
2146 2 * sizeof(unsigned long long)))
2147 flags
|= SLAB_RED_ZONE
| SLAB_STORE_USER
;
2148 if (!(flags
& SLAB_DESTROY_BY_RCU
))
2149 flags
|= SLAB_POISON
;
2151 if (flags
& SLAB_DESTROY_BY_RCU
)
2152 BUG_ON(flags
& SLAB_POISON
);
2155 * Always checks flags, a caller might be expecting debug support which
2158 BUG_ON(flags
& ~CREATE_MASK
);
2161 * Check that size is in terms of words. This is needed to avoid
2162 * unaligned accesses for some archs when redzoning is used, and makes
2163 * sure any on-slab bufctl's are also correctly aligned.
2165 if (size
& (BYTES_PER_WORD
- 1)) {
2166 size
+= (BYTES_PER_WORD
- 1);
2167 size
&= ~(BYTES_PER_WORD
- 1);
2170 /* calculate the final buffer alignment: */
2172 /* 1) arch recommendation: can be overridden for debug */
2173 if (flags
& SLAB_HWCACHE_ALIGN
) {
2175 * Default alignment: as specified by the arch code. Except if
2176 * an object is really small, then squeeze multiple objects into
2179 ralign
= cache_line_size();
2180 while (size
<= ralign
/ 2)
2183 ralign
= BYTES_PER_WORD
;
2187 * Redzoning and user store require word alignment or possibly larger.
2188 * Note this will be overridden by architecture or caller mandated
2189 * alignment if either is greater than BYTES_PER_WORD.
2191 if (flags
& SLAB_STORE_USER
)
2192 ralign
= BYTES_PER_WORD
;
2194 if (flags
& SLAB_RED_ZONE
) {
2195 ralign
= REDZONE_ALIGN
;
2196 /* If redzoning, ensure that the second redzone is suitably
2197 * aligned, by adjusting the object size accordingly. */
2198 size
+= REDZONE_ALIGN
- 1;
2199 size
&= ~(REDZONE_ALIGN
- 1);
2202 /* 2) arch mandated alignment */
2203 if (ralign
< ARCH_SLAB_MINALIGN
) {
2204 ralign
= ARCH_SLAB_MINALIGN
;
2206 /* 3) caller mandated alignment */
2207 if (ralign
< align
) {
2210 /* disable debug if necessary */
2211 if (ralign
> __alignof__(unsigned long long))
2212 flags
&= ~(SLAB_RED_ZONE
| SLAB_STORE_USER
);
2218 if (slab_is_available())
2223 /* Get cache's description obj. */
2224 cachep
= kmem_cache_zalloc(&cache_cache
, gfp
);
2229 cachep
->obj_size
= size
;
2232 * Both debugging options require word-alignment which is calculated
2235 if (flags
& SLAB_RED_ZONE
) {
2236 /* add space for red zone words */
2237 cachep
->obj_offset
+= sizeof(unsigned long long);
2238 size
+= 2 * sizeof(unsigned long long);
2240 if (flags
& SLAB_STORE_USER
) {
2241 /* user store requires one word storage behind the end of
2242 * the real object. But if the second red zone needs to be
2243 * aligned to 64 bits, we must allow that much space.
2245 if (flags
& SLAB_RED_ZONE
)
2246 size
+= REDZONE_ALIGN
;
2248 size
+= BYTES_PER_WORD
;
2250 #if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
2251 if (size
>= malloc_sizes
[INDEX_L3
+ 1].cs_size
2252 && cachep
->obj_size
> cache_line_size() && size
< PAGE_SIZE
) {
2253 cachep
->obj_offset
+= PAGE_SIZE
- size
;
2260 * Determine if the slab management is 'on' or 'off' slab.
2261 * (bootstrapping cannot cope with offslab caches so don't do
2264 if ((size
>= (PAGE_SIZE
>> 3)) && !slab_early_init
)
2266 * Size is large, assume best to place the slab management obj
2267 * off-slab (should allow better packing of objs).
2269 flags
|= CFLGS_OFF_SLAB
;
2271 size
= ALIGN(size
, align
);
2273 left_over
= calculate_slab_order(cachep
, size
, align
, flags
);
2277 "kmem_cache_create: couldn't create cache %s.\n", name
);
2278 kmem_cache_free(&cache_cache
, cachep
);
2282 slab_size
= ALIGN(cachep
->num
* sizeof(kmem_bufctl_t
)
2283 + sizeof(struct slab
), align
);
2286 * If the slab has been placed off-slab, and we have enough space then
2287 * move it on-slab. This is at the expense of any extra colouring.
2289 if (flags
& CFLGS_OFF_SLAB
&& left_over
>= slab_size
) {
2290 flags
&= ~CFLGS_OFF_SLAB
;
2291 left_over
-= slab_size
;
2294 if (flags
& CFLGS_OFF_SLAB
) {
2295 /* really off slab. No need for manual alignment */
2297 cachep
->num
* sizeof(kmem_bufctl_t
) + sizeof(struct slab
);
2299 #ifdef CONFIG_PAGE_POISONING
2300 /* If we're going to use the generic kernel_map_pages()
2301 * poisoning, then it's going to smash the contents of
2302 * the redzone and userword anyhow, so switch them off.
2304 if (size
% PAGE_SIZE
== 0 && flags
& SLAB_POISON
)
2305 flags
&= ~(SLAB_RED_ZONE
| SLAB_STORE_USER
);
2309 cachep
->colour_off
= cache_line_size();
2310 /* Offset must be a multiple of the alignment. */
2311 if (cachep
->colour_off
< align
)
2312 cachep
->colour_off
= align
;
2313 cachep
->colour
= left_over
/ cachep
->colour_off
;
2314 cachep
->slab_size
= slab_size
;
2315 cachep
->flags
= flags
;
2316 cachep
->gfpflags
= 0;
2317 if (CONFIG_ZONE_DMA_FLAG
&& (flags
& SLAB_CACHE_DMA
))
2318 cachep
->gfpflags
|= GFP_DMA
;
2319 cachep
->buffer_size
= size
;
2320 cachep
->reciprocal_buffer_size
= reciprocal_value(size
);
2322 if (flags
& CFLGS_OFF_SLAB
) {
2323 cachep
->slabp_cache
= kmem_find_general_cachep(slab_size
, 0u);
2325 * This is a possibility for one of the malloc_sizes caches.
2326 * But since we go off slab only for object size greater than
2327 * PAGE_SIZE/8, and malloc_sizes gets created in ascending order,
2328 * this should not happen at all.
2329 * But leave a BUG_ON for some lucky dude.
2331 BUG_ON(ZERO_OR_NULL_PTR(cachep
->slabp_cache
));
2333 cachep
->ctor
= ctor
;
2334 cachep
->name
= name
;
2336 if (setup_cpu_cache(cachep
, gfp
)) {
2337 __kmem_cache_destroy(cachep
);
2342 /* cache setup completed, link it into the list */
2343 list_add(&cachep
->next
, &cache_chain
);
2345 if (!cachep
&& (flags
& SLAB_PANIC
))
2346 panic("kmem_cache_create(): failed to create slab `%s'\n",
2348 if (slab_is_available()) {
2349 mutex_unlock(&cache_chain_mutex
);
2354 EXPORT_SYMBOL(kmem_cache_create
);
2357 static void check_irq_off(void)
2359 BUG_ON(!irqs_disabled());
2362 static void check_irq_on(void)
2364 BUG_ON(irqs_disabled());
2367 static void check_spinlock_acquired(struct kmem_cache
*cachep
)
2371 assert_spin_locked(&cachep
->nodelists
[numa_node_id()]->list_lock
);
2375 static void check_spinlock_acquired_node(struct kmem_cache
*cachep
, int node
)
2379 assert_spin_locked(&cachep
->nodelists
[node
]->list_lock
);
2384 #define check_irq_off() do { } while(0)
2385 #define check_irq_on() do { } while(0)
2386 #define check_spinlock_acquired(x) do { } while(0)
2387 #define check_spinlock_acquired_node(x, y) do { } while(0)
2390 static void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
2391 struct array_cache
*ac
,
2392 int force
, int node
);
2394 static void do_drain(void *arg
)
2396 struct kmem_cache
*cachep
= arg
;
2397 struct array_cache
*ac
;
2398 int node
= numa_node_id();
2401 ac
= cpu_cache_get(cachep
);
2402 spin_lock(&cachep
->nodelists
[node
]->list_lock
);
2403 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
2404 spin_unlock(&cachep
->nodelists
[node
]->list_lock
);
2408 static void drain_cpu_caches(struct kmem_cache
*cachep
)
2410 struct kmem_list3
*l3
;
2413 on_each_cpu(do_drain
, cachep
, 1);
2415 for_each_online_node(node
) {
2416 l3
= cachep
->nodelists
[node
];
2417 if (l3
&& l3
->alien
)
2418 drain_alien_cache(cachep
, l3
->alien
);
2421 for_each_online_node(node
) {
2422 l3
= cachep
->nodelists
[node
];
2424 drain_array(cachep
, l3
, l3
->shared
, 1, node
);
2429 * Remove slabs from the list of free slabs.
2430 * Specify the number of slabs to drain in tofree.
2432 * Returns the actual number of slabs released.
2434 static int drain_freelist(struct kmem_cache
*cache
,
2435 struct kmem_list3
*l3
, int tofree
)
2437 struct list_head
*p
;
2442 while (nr_freed
< tofree
&& !list_empty(&l3
->slabs_free
)) {
2444 spin_lock_irq(&l3
->list_lock
);
2445 p
= l3
->slabs_free
.prev
;
2446 if (p
== &l3
->slabs_free
) {
2447 spin_unlock_irq(&l3
->list_lock
);
2451 slabp
= list_entry(p
, struct slab
, list
);
2453 BUG_ON(slabp
->inuse
);
2455 list_del(&slabp
->list
);
2457 * Safe to drop the lock. The slab is no longer linked
2460 l3
->free_objects
-= cache
->num
;
2461 spin_unlock_irq(&l3
->list_lock
);
2462 slab_destroy(cache
, slabp
);
2469 /* Called with cache_chain_mutex held to protect against cpu hotplug */
2470 static int __cache_shrink(struct kmem_cache
*cachep
)
2473 struct kmem_list3
*l3
;
2475 drain_cpu_caches(cachep
);
2478 for_each_online_node(i
) {
2479 l3
= cachep
->nodelists
[i
];
2483 drain_freelist(cachep
, l3
, l3
->free_objects
);
2485 ret
+= !list_empty(&l3
->slabs_full
) ||
2486 !list_empty(&l3
->slabs_partial
);
2488 return (ret
? 1 : 0);
2492 * kmem_cache_shrink - Shrink a cache.
2493 * @cachep: The cache to shrink.
2495 * Releases as many slabs as possible for a cache.
2496 * To help debugging, a zero exit status indicates all slabs were released.
2498 int kmem_cache_shrink(struct kmem_cache
*cachep
)
2501 BUG_ON(!cachep
|| in_interrupt());
2504 mutex_lock(&cache_chain_mutex
);
2505 ret
= __cache_shrink(cachep
);
2506 mutex_unlock(&cache_chain_mutex
);
2510 EXPORT_SYMBOL(kmem_cache_shrink
);
2513 * kmem_cache_destroy - delete a cache
2514 * @cachep: the cache to destroy
2516 * Remove a &struct kmem_cache object from the slab cache.
2518 * It is expected this function will be called by a module when it is
2519 * unloaded. This will remove the cache completely, and avoid a duplicate
2520 * cache being allocated each time a module is loaded and unloaded, if the
2521 * module doesn't have persistent in-kernel storage across loads and unloads.
2523 * The cache must be empty before calling this function.
2525 * The caller must guarantee that noone will allocate memory from the cache
2526 * during the kmem_cache_destroy().
2528 void kmem_cache_destroy(struct kmem_cache
*cachep
)
2530 BUG_ON(!cachep
|| in_interrupt());
2532 /* Find the cache in the chain of caches. */
2534 mutex_lock(&cache_chain_mutex
);
2536 * the chain is never empty, cache_cache is never destroyed
2538 list_del(&cachep
->next
);
2539 if (__cache_shrink(cachep
)) {
2540 slab_error(cachep
, "Can't free all objects");
2541 list_add(&cachep
->next
, &cache_chain
);
2542 mutex_unlock(&cache_chain_mutex
);
2547 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
))
2550 __kmem_cache_destroy(cachep
);
2551 mutex_unlock(&cache_chain_mutex
);
2554 EXPORT_SYMBOL(kmem_cache_destroy
);
2557 * Get the memory for a slab management obj.
2558 * For a slab cache when the slab descriptor is off-slab, slab descriptors
2559 * always come from malloc_sizes caches. The slab descriptor cannot
2560 * come from the same cache which is getting created because,
2561 * when we are searching for an appropriate cache for these
2562 * descriptors in kmem_cache_create, we search through the malloc_sizes array.
2563 * If we are creating a malloc_sizes cache here it would not be visible to
2564 * kmem_find_general_cachep till the initialization is complete.
2565 * Hence we cannot have slabp_cache same as the original cache.
2567 static struct slab
*alloc_slabmgmt(struct kmem_cache
*cachep
, void *objp
,
2568 int colour_off
, gfp_t local_flags
,
2573 if (OFF_SLAB(cachep
)) {
2574 /* Slab management obj is off-slab. */
2575 slabp
= kmem_cache_alloc_node(cachep
->slabp_cache
,
2576 local_flags
, nodeid
);
2578 * If the first object in the slab is leaked (it's allocated
2579 * but no one has a reference to it), we want to make sure
2580 * kmemleak does not treat the ->s_mem pointer as a reference
2581 * to the object. Otherwise we will not report the leak.
2583 kmemleak_scan_area(slabp
, offsetof(struct slab
, list
),
2584 sizeof(struct list_head
), local_flags
);
2588 slabp
= objp
+ colour_off
;
2589 colour_off
+= cachep
->slab_size
;
2592 slabp
->colouroff
= colour_off
;
2593 slabp
->s_mem
= objp
+ colour_off
;
2594 slabp
->nodeid
= nodeid
;
2599 static inline kmem_bufctl_t
*slab_bufctl(struct slab
*slabp
)
2601 return (kmem_bufctl_t
*) (slabp
+ 1);
2604 static void cache_init_objs(struct kmem_cache
*cachep
,
2609 for (i
= 0; i
< cachep
->num
; i
++) {
2610 void *objp
= index_to_obj(cachep
, slabp
, i
);
2612 /* need to poison the objs? */
2613 if (cachep
->flags
& SLAB_POISON
)
2614 poison_obj(cachep
, objp
, POISON_FREE
);
2615 if (cachep
->flags
& SLAB_STORE_USER
)
2616 *dbg_userword(cachep
, objp
) = NULL
;
2618 if (cachep
->flags
& SLAB_RED_ZONE
) {
2619 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2620 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2623 * Constructors are not allowed to allocate memory from the same
2624 * cache which they are a constructor for. Otherwise, deadlock.
2625 * They must also be threaded.
2627 if (cachep
->ctor
&& !(cachep
->flags
& SLAB_POISON
))
2628 cachep
->ctor(objp
+ obj_offset(cachep
));
2630 if (cachep
->flags
& SLAB_RED_ZONE
) {
2631 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
2632 slab_error(cachep
, "constructor overwrote the"
2633 " end of an object");
2634 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
2635 slab_error(cachep
, "constructor overwrote the"
2636 " start of an object");
2638 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 &&
2639 OFF_SLAB(cachep
) && cachep
->flags
& SLAB_POISON
)
2640 kernel_map_pages(virt_to_page(objp
),
2641 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2646 slab_bufctl(slabp
)[i
] = i
+ 1;
2648 slab_bufctl(slabp
)[i
- 1] = BUFCTL_END
;
2651 static void kmem_flagcheck(struct kmem_cache
*cachep
, gfp_t flags
)
2653 if (CONFIG_ZONE_DMA_FLAG
) {
2654 if (flags
& GFP_DMA
)
2655 BUG_ON(!(cachep
->gfpflags
& GFP_DMA
));
2657 BUG_ON(cachep
->gfpflags
& GFP_DMA
);
2661 static void *slab_get_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2664 void *objp
= index_to_obj(cachep
, slabp
, slabp
->free
);
2668 next
= slab_bufctl(slabp
)[slabp
->free
];
2670 slab_bufctl(slabp
)[slabp
->free
] = BUFCTL_FREE
;
2671 WARN_ON(slabp
->nodeid
!= nodeid
);
2678 static void slab_put_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2679 void *objp
, int nodeid
)
2681 unsigned int objnr
= obj_to_index(cachep
, slabp
, objp
);
2684 /* Verify that the slab belongs to the intended node */
2685 WARN_ON(slabp
->nodeid
!= nodeid
);
2687 if (slab_bufctl(slabp
)[objnr
] + 1 <= SLAB_LIMIT
+ 1) {
2688 printk(KERN_ERR
"slab: double free detected in cache "
2689 "'%s', objp %p\n", cachep
->name
, objp
);
2693 slab_bufctl(slabp
)[objnr
] = slabp
->free
;
2694 slabp
->free
= objnr
;
2699 * Map pages beginning at addr to the given cache and slab. This is required
2700 * for the slab allocator to be able to lookup the cache and slab of a
2701 * virtual address for kfree, ksize, kmem_ptr_validate, and slab debugging.
2703 static void slab_map_pages(struct kmem_cache
*cache
, struct slab
*slab
,
2709 page
= virt_to_page(addr
);
2712 if (likely(!PageCompound(page
)))
2713 nr_pages
<<= cache
->gfporder
;
2716 page_set_cache(page
, cache
);
2717 page_set_slab(page
, slab
);
2719 } while (--nr_pages
);
2723 * Grow (by 1) the number of slabs within a cache. This is called by
2724 * kmem_cache_alloc() when there are no active objs left in a cache.
2726 static int cache_grow(struct kmem_cache
*cachep
,
2727 gfp_t flags
, int nodeid
, void *objp
)
2732 struct kmem_list3
*l3
;
2735 * Be lazy and only check for valid flags here, keeping it out of the
2736 * critical path in kmem_cache_alloc().
2738 BUG_ON(flags
& GFP_SLAB_BUG_MASK
);
2739 local_flags
= flags
& (GFP_CONSTRAINT_MASK
|GFP_RECLAIM_MASK
);
2741 /* Take the l3 list lock to change the colour_next on this node */
2743 l3
= cachep
->nodelists
[nodeid
];
2744 spin_lock(&l3
->list_lock
);
2746 /* Get colour for the slab, and cal the next value. */
2747 offset
= l3
->colour_next
;
2749 if (l3
->colour_next
>= cachep
->colour
)
2750 l3
->colour_next
= 0;
2751 spin_unlock(&l3
->list_lock
);
2753 offset
*= cachep
->colour_off
;
2755 if (local_flags
& __GFP_WAIT
)
2759 * The test for missing atomic flag is performed here, rather than
2760 * the more obvious place, simply to reduce the critical path length
2761 * in kmem_cache_alloc(). If a caller is seriously mis-behaving they
2762 * will eventually be caught here (where it matters).
2764 kmem_flagcheck(cachep
, flags
);
2767 * Get mem for the objs. Attempt to allocate a physical page from
2771 objp
= kmem_getpages(cachep
, local_flags
, nodeid
);
2775 /* Get slab management. */
2776 slabp
= alloc_slabmgmt(cachep
, objp
, offset
,
2777 local_flags
& ~GFP_CONSTRAINT_MASK
, nodeid
);
2781 slab_map_pages(cachep
, slabp
, objp
);
2783 cache_init_objs(cachep
, slabp
);
2785 if (local_flags
& __GFP_WAIT
)
2786 local_irq_disable();
2788 spin_lock(&l3
->list_lock
);
2790 /* Make slab active. */
2791 list_add_tail(&slabp
->list
, &(l3
->slabs_free
));
2792 STATS_INC_GROWN(cachep
);
2793 l3
->free_objects
+= cachep
->num
;
2794 spin_unlock(&l3
->list_lock
);
2797 kmem_freepages(cachep
, objp
);
2799 if (local_flags
& __GFP_WAIT
)
2800 local_irq_disable();
2807 * Perform extra freeing checks:
2808 * - detect bad pointers.
2809 * - POISON/RED_ZONE checking
2811 static void kfree_debugcheck(const void *objp
)
2813 if (!virt_addr_valid(objp
)) {
2814 printk(KERN_ERR
"kfree_debugcheck: out of range ptr %lxh.\n",
2815 (unsigned long)objp
);
2820 static inline void verify_redzone_free(struct kmem_cache
*cache
, void *obj
)
2822 unsigned long long redzone1
, redzone2
;
2824 redzone1
= *dbg_redzone1(cache
, obj
);
2825 redzone2
= *dbg_redzone2(cache
, obj
);
2830 if (redzone1
== RED_ACTIVE
&& redzone2
== RED_ACTIVE
)
2833 if (redzone1
== RED_INACTIVE
&& redzone2
== RED_INACTIVE
)
2834 slab_error(cache
, "double free detected");
2836 slab_error(cache
, "memory outside object was overwritten");
2838 printk(KERN_ERR
"%p: redzone 1:0x%llx, redzone 2:0x%llx.\n",
2839 obj
, redzone1
, redzone2
);
2842 static void *cache_free_debugcheck(struct kmem_cache
*cachep
, void *objp
,
2849 BUG_ON(virt_to_cache(objp
) != cachep
);
2851 objp
-= obj_offset(cachep
);
2852 kfree_debugcheck(objp
);
2853 page
= virt_to_head_page(objp
);
2855 slabp
= page_get_slab(page
);
2857 if (cachep
->flags
& SLAB_RED_ZONE
) {
2858 verify_redzone_free(cachep
, objp
);
2859 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2860 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2862 if (cachep
->flags
& SLAB_STORE_USER
)
2863 *dbg_userword(cachep
, objp
) = caller
;
2865 objnr
= obj_to_index(cachep
, slabp
, objp
);
2867 BUG_ON(objnr
>= cachep
->num
);
2868 BUG_ON(objp
!= index_to_obj(cachep
, slabp
, objnr
));
2870 #ifdef CONFIG_DEBUG_SLAB_LEAK
2871 slab_bufctl(slabp
)[objnr
] = BUFCTL_FREE
;
2873 if (cachep
->flags
& SLAB_POISON
) {
2874 #ifdef CONFIG_DEBUG_PAGEALLOC
2875 if ((cachep
->buffer_size
% PAGE_SIZE
)==0 && OFF_SLAB(cachep
)) {
2876 store_stackinfo(cachep
, objp
, (unsigned long)caller
);
2877 kernel_map_pages(virt_to_page(objp
),
2878 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2880 poison_obj(cachep
, objp
, POISON_FREE
);
2883 poison_obj(cachep
, objp
, POISON_FREE
);
2889 static void check_slabp(struct kmem_cache
*cachep
, struct slab
*slabp
)
2894 /* Check slab's freelist to see if this obj is there. */
2895 for (i
= slabp
->free
; i
!= BUFCTL_END
; i
= slab_bufctl(slabp
)[i
]) {
2897 if (entries
> cachep
->num
|| i
>= cachep
->num
)
2900 if (entries
!= cachep
->num
- slabp
->inuse
) {
2902 printk(KERN_ERR
"slab: Internal list corruption detected in "
2903 "cache '%s'(%d), slabp %p(%d). Hexdump:\n",
2904 cachep
->name
, cachep
->num
, slabp
, slabp
->inuse
);
2906 i
< sizeof(*slabp
) + cachep
->num
* sizeof(kmem_bufctl_t
);
2909 printk("\n%03x:", i
);
2910 printk(" %02x", ((unsigned char *)slabp
)[i
]);
2917 #define kfree_debugcheck(x) do { } while(0)
2918 #define cache_free_debugcheck(x,objp,z) (objp)
2919 #define check_slabp(x,y) do { } while(0)
2922 static void *cache_alloc_refill(struct kmem_cache
*cachep
, gfp_t flags
)
2925 struct kmem_list3
*l3
;
2926 struct array_cache
*ac
;
2931 node
= numa_node_id();
2932 ac
= cpu_cache_get(cachep
);
2933 batchcount
= ac
->batchcount
;
2934 if (!ac
->touched
&& batchcount
> BATCHREFILL_LIMIT
) {
2936 * If there was little recent activity on this cache, then
2937 * perform only a partial refill. Otherwise we could generate
2940 batchcount
= BATCHREFILL_LIMIT
;
2942 l3
= cachep
->nodelists
[node
];
2944 BUG_ON(ac
->avail
> 0 || !l3
);
2945 spin_lock(&l3
->list_lock
);
2947 /* See if we can refill from the shared array */
2948 if (l3
->shared
&& transfer_objects(ac
, l3
->shared
, batchcount
))
2951 while (batchcount
> 0) {
2952 struct list_head
*entry
;
2954 /* Get slab alloc is to come from. */
2955 entry
= l3
->slabs_partial
.next
;
2956 if (entry
== &l3
->slabs_partial
) {
2957 l3
->free_touched
= 1;
2958 entry
= l3
->slabs_free
.next
;
2959 if (entry
== &l3
->slabs_free
)
2963 slabp
= list_entry(entry
, struct slab
, list
);
2964 check_slabp(cachep
, slabp
);
2965 check_spinlock_acquired(cachep
);
2968 * The slab was either on partial or free list so
2969 * there must be at least one object available for
2972 BUG_ON(slabp
->inuse
>= cachep
->num
);
2974 while (slabp
->inuse
< cachep
->num
&& batchcount
--) {
2975 STATS_INC_ALLOCED(cachep
);
2976 STATS_INC_ACTIVE(cachep
);
2977 STATS_SET_HIGH(cachep
);
2979 ac
->entry
[ac
->avail
++] = slab_get_obj(cachep
, slabp
,
2982 check_slabp(cachep
, slabp
);
2984 /* move slabp to correct slabp list: */
2985 list_del(&slabp
->list
);
2986 if (slabp
->free
== BUFCTL_END
)
2987 list_add(&slabp
->list
, &l3
->slabs_full
);
2989 list_add(&slabp
->list
, &l3
->slabs_partial
);
2993 l3
->free_objects
-= ac
->avail
;
2995 spin_unlock(&l3
->list_lock
);
2997 if (unlikely(!ac
->avail
)) {
2999 x
= cache_grow(cachep
, flags
| GFP_THISNODE
, node
, NULL
);
3001 /* cache_grow can reenable interrupts, then ac could change. */
3002 ac
= cpu_cache_get(cachep
);
3003 if (!x
&& ac
->avail
== 0) /* no objects in sight? abort */
3006 if (!ac
->avail
) /* objects refilled by interrupt? */
3010 return ac
->entry
[--ac
->avail
];
3013 static inline void cache_alloc_debugcheck_before(struct kmem_cache
*cachep
,
3016 might_sleep_if(flags
& __GFP_WAIT
);
3018 kmem_flagcheck(cachep
, flags
);
3023 static void *cache_alloc_debugcheck_after(struct kmem_cache
*cachep
,
3024 gfp_t flags
, void *objp
, void *caller
)
3028 if (cachep
->flags
& SLAB_POISON
) {
3029 #ifdef CONFIG_DEBUG_PAGEALLOC
3030 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 && OFF_SLAB(cachep
))
3031 kernel_map_pages(virt_to_page(objp
),
3032 cachep
->buffer_size
/ PAGE_SIZE
, 1);
3034 check_poison_obj(cachep
, objp
);
3036 check_poison_obj(cachep
, objp
);
3038 poison_obj(cachep
, objp
, POISON_INUSE
);
3040 if (cachep
->flags
& SLAB_STORE_USER
)
3041 *dbg_userword(cachep
, objp
) = caller
;
3043 if (cachep
->flags
& SLAB_RED_ZONE
) {
3044 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
||
3045 *dbg_redzone2(cachep
, objp
) != RED_INACTIVE
) {
3046 slab_error(cachep
, "double free, or memory outside"
3047 " object was overwritten");
3049 "%p: redzone 1:0x%llx, redzone 2:0x%llx\n",
3050 objp
, *dbg_redzone1(cachep
, objp
),
3051 *dbg_redzone2(cachep
, objp
));
3053 *dbg_redzone1(cachep
, objp
) = RED_ACTIVE
;
3054 *dbg_redzone2(cachep
, objp
) = RED_ACTIVE
;
3056 #ifdef CONFIG_DEBUG_SLAB_LEAK
3061 slabp
= page_get_slab(virt_to_head_page(objp
));
3062 objnr
= (unsigned)(objp
- slabp
->s_mem
) / cachep
->buffer_size
;
3063 slab_bufctl(slabp
)[objnr
] = BUFCTL_ACTIVE
;
3066 objp
+= obj_offset(cachep
);
3067 if (cachep
->ctor
&& cachep
->flags
& SLAB_POISON
)
3069 #if ARCH_SLAB_MINALIGN
3070 if ((u32
)objp
& (ARCH_SLAB_MINALIGN
-1)) {
3071 printk(KERN_ERR
"0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
3072 objp
, ARCH_SLAB_MINALIGN
);
3078 #define cache_alloc_debugcheck_after(a,b,objp,d) (objp)
3081 static bool slab_should_failslab(struct kmem_cache
*cachep
, gfp_t flags
)
3083 if (cachep
== &cache_cache
)
3086 return should_failslab(obj_size(cachep
), flags
);
3089 static inline void *____cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3092 struct array_cache
*ac
;
3096 ac
= cpu_cache_get(cachep
);
3097 if (likely(ac
->avail
)) {
3098 STATS_INC_ALLOCHIT(cachep
);
3100 objp
= ac
->entry
[--ac
->avail
];
3102 STATS_INC_ALLOCMISS(cachep
);
3103 objp
= cache_alloc_refill(cachep
, flags
);
3106 * To avoid a false negative, if an object that is in one of the
3107 * per-CPU caches is leaked, we need to make sure kmemleak doesn't
3108 * treat the array pointers as a reference to the object.
3110 kmemleak_erase(&ac
->entry
[ac
->avail
]);
3116 * Try allocating on another node if PF_SPREAD_SLAB|PF_MEMPOLICY.
3118 * If we are in_interrupt, then process context, including cpusets and
3119 * mempolicy, may not apply and should not be used for allocation policy.
3121 static void *alternate_node_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3123 int nid_alloc
, nid_here
;
3125 if (in_interrupt() || (flags
& __GFP_THISNODE
))
3127 nid_alloc
= nid_here
= numa_node_id();
3128 if (cpuset_do_slab_mem_spread() && (cachep
->flags
& SLAB_MEM_SPREAD
))
3129 nid_alloc
= cpuset_mem_spread_node();
3130 else if (current
->mempolicy
)
3131 nid_alloc
= slab_node(current
->mempolicy
);
3132 if (nid_alloc
!= nid_here
)
3133 return ____cache_alloc_node(cachep
, flags
, nid_alloc
);
3138 * Fallback function if there was no memory available and no objects on a
3139 * certain node and fall back is permitted. First we scan all the
3140 * available nodelists for available objects. If that fails then we
3141 * perform an allocation without specifying a node. This allows the page
3142 * allocator to do its reclaim / fallback magic. We then insert the
3143 * slab into the proper nodelist and then allocate from it.
3145 static void *fallback_alloc(struct kmem_cache
*cache
, gfp_t flags
)
3147 struct zonelist
*zonelist
;
3151 enum zone_type high_zoneidx
= gfp_zone(flags
);
3155 if (flags
& __GFP_THISNODE
)
3158 zonelist
= node_zonelist(slab_node(current
->mempolicy
), flags
);
3159 local_flags
= flags
& (GFP_CONSTRAINT_MASK
|GFP_RECLAIM_MASK
);
3163 * Look through allowed nodes for objects available
3164 * from existing per node queues.
3166 for_each_zone_zonelist(zone
, z
, zonelist
, high_zoneidx
) {
3167 nid
= zone_to_nid(zone
);
3169 if (cpuset_zone_allowed_hardwall(zone
, flags
) &&
3170 cache
->nodelists
[nid
] &&
3171 cache
->nodelists
[nid
]->free_objects
) {
3172 obj
= ____cache_alloc_node(cache
,
3173 flags
| GFP_THISNODE
, nid
);
3181 * This allocation will be performed within the constraints
3182 * of the current cpuset / memory policy requirements.
3183 * We may trigger various forms of reclaim on the allowed
3184 * set and go into memory reserves if necessary.
3186 if (local_flags
& __GFP_WAIT
)
3188 kmem_flagcheck(cache
, flags
);
3189 obj
= kmem_getpages(cache
, local_flags
, numa_node_id());
3190 if (local_flags
& __GFP_WAIT
)
3191 local_irq_disable();
3194 * Insert into the appropriate per node queues
3196 nid
= page_to_nid(virt_to_page(obj
));
3197 if (cache_grow(cache
, flags
, nid
, obj
)) {
3198 obj
= ____cache_alloc_node(cache
,
3199 flags
| GFP_THISNODE
, nid
);
3202 * Another processor may allocate the
3203 * objects in the slab since we are
3204 * not holding any locks.
3208 /* cache_grow already freed obj */
3217 * A interface to enable slab creation on nodeid
3219 static void *____cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
,
3222 struct list_head
*entry
;
3224 struct kmem_list3
*l3
;
3228 l3
= cachep
->nodelists
[nodeid
];
3233 spin_lock(&l3
->list_lock
);
3234 entry
= l3
->slabs_partial
.next
;
3235 if (entry
== &l3
->slabs_partial
) {
3236 l3
->free_touched
= 1;
3237 entry
= l3
->slabs_free
.next
;
3238 if (entry
== &l3
->slabs_free
)
3242 slabp
= list_entry(entry
, struct slab
, list
);
3243 check_spinlock_acquired_node(cachep
, nodeid
);
3244 check_slabp(cachep
, slabp
);
3246 STATS_INC_NODEALLOCS(cachep
);
3247 STATS_INC_ACTIVE(cachep
);
3248 STATS_SET_HIGH(cachep
);
3250 BUG_ON(slabp
->inuse
== cachep
->num
);
3252 obj
= slab_get_obj(cachep
, slabp
, nodeid
);
3253 check_slabp(cachep
, slabp
);
3255 /* move slabp to correct slabp list: */
3256 list_del(&slabp
->list
);
3258 if (slabp
->free
== BUFCTL_END
)
3259 list_add(&slabp
->list
, &l3
->slabs_full
);
3261 list_add(&slabp
->list
, &l3
->slabs_partial
);
3263 spin_unlock(&l3
->list_lock
);
3267 spin_unlock(&l3
->list_lock
);
3268 x
= cache_grow(cachep
, flags
| GFP_THISNODE
, nodeid
, NULL
);
3272 return fallback_alloc(cachep
, flags
);
3279 * kmem_cache_alloc_node - Allocate an object on the specified node
3280 * @cachep: The cache to allocate from.
3281 * @flags: See kmalloc().
3282 * @nodeid: node number of the target node.
3283 * @caller: return address of caller, used for debug information
3285 * Identical to kmem_cache_alloc but it will allocate memory on the given
3286 * node, which can improve the performance for cpu bound structures.
3288 * Fallback to other node is possible if __GFP_THISNODE is not set.
3290 static __always_inline
void *
3291 __cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
,
3294 unsigned long save_flags
;
3297 flags
&= gfp_allowed_mask
;
3299 lockdep_trace_alloc(flags
);
3301 if (slab_should_failslab(cachep
, flags
))
3304 cache_alloc_debugcheck_before(cachep
, flags
);
3305 local_irq_save(save_flags
);
3307 if (unlikely(nodeid
== -1))
3308 nodeid
= numa_node_id();
3310 if (unlikely(!cachep
->nodelists
[nodeid
])) {
3311 /* Node not bootstrapped yet */
3312 ptr
= fallback_alloc(cachep
, flags
);
3316 if (nodeid
== numa_node_id()) {
3318 * Use the locally cached objects if possible.
3319 * However ____cache_alloc does not allow fallback
3320 * to other nodes. It may fail while we still have
3321 * objects on other nodes available.
3323 ptr
= ____cache_alloc(cachep
, flags
);
3327 /* ___cache_alloc_node can fall back to other nodes */
3328 ptr
= ____cache_alloc_node(cachep
, flags
, nodeid
);
3330 local_irq_restore(save_flags
);
3331 ptr
= cache_alloc_debugcheck_after(cachep
, flags
, ptr
, caller
);
3332 kmemleak_alloc_recursive(ptr
, obj_size(cachep
), 1, cachep
->flags
,
3336 kmemcheck_slab_alloc(cachep
, flags
, ptr
, obj_size(cachep
));
3338 if (unlikely((flags
& __GFP_ZERO
) && ptr
))
3339 memset(ptr
, 0, obj_size(cachep
));
3344 static __always_inline
void *
3345 __do_cache_alloc(struct kmem_cache
*cache
, gfp_t flags
)
3349 if (unlikely(current
->flags
& (PF_SPREAD_SLAB
| PF_MEMPOLICY
))) {
3350 objp
= alternate_node_alloc(cache
, flags
);
3354 objp
= ____cache_alloc(cache
, flags
);
3357 * We may just have run out of memory on the local node.
3358 * ____cache_alloc_node() knows how to locate memory on other nodes
3361 objp
= ____cache_alloc_node(cache
, flags
, numa_node_id());
3368 static __always_inline
void *
3369 __do_cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3371 return ____cache_alloc(cachep
, flags
);
3374 #endif /* CONFIG_NUMA */
3376 static __always_inline
void *
3377 __cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
, void *caller
)
3379 unsigned long save_flags
;
3382 flags
&= gfp_allowed_mask
;
3384 lockdep_trace_alloc(flags
);
3386 if (slab_should_failslab(cachep
, flags
))
3389 cache_alloc_debugcheck_before(cachep
, flags
);
3390 local_irq_save(save_flags
);
3391 objp
= __do_cache_alloc(cachep
, flags
);
3392 local_irq_restore(save_flags
);
3393 objp
= cache_alloc_debugcheck_after(cachep
, flags
, objp
, caller
);
3394 kmemleak_alloc_recursive(objp
, obj_size(cachep
), 1, cachep
->flags
,
3399 kmemcheck_slab_alloc(cachep
, flags
, objp
, obj_size(cachep
));
3401 if (unlikely((flags
& __GFP_ZERO
) && objp
))
3402 memset(objp
, 0, obj_size(cachep
));
3408 * Caller needs to acquire correct kmem_list's list_lock
3410 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int nr_objects
,
3414 struct kmem_list3
*l3
;
3416 for (i
= 0; i
< nr_objects
; i
++) {
3417 void *objp
= objpp
[i
];
3420 slabp
= virt_to_slab(objp
);
3421 l3
= cachep
->nodelists
[node
];
3422 list_del(&slabp
->list
);
3423 check_spinlock_acquired_node(cachep
, node
);
3424 check_slabp(cachep
, slabp
);
3425 slab_put_obj(cachep
, slabp
, objp
, node
);
3426 STATS_DEC_ACTIVE(cachep
);
3428 check_slabp(cachep
, slabp
);
3430 /* fixup slab chains */
3431 if (slabp
->inuse
== 0) {
3432 if (l3
->free_objects
> l3
->free_limit
) {
3433 l3
->free_objects
-= cachep
->num
;
3434 /* No need to drop any previously held
3435 * lock here, even if we have a off-slab slab
3436 * descriptor it is guaranteed to come from
3437 * a different cache, refer to comments before
3440 slab_destroy(cachep
, slabp
);
3442 list_add(&slabp
->list
, &l3
->slabs_free
);
3445 /* Unconditionally move a slab to the end of the
3446 * partial list on free - maximum time for the
3447 * other objects to be freed, too.
3449 list_add_tail(&slabp
->list
, &l3
->slabs_partial
);
3454 static void cache_flusharray(struct kmem_cache
*cachep
, struct array_cache
*ac
)
3457 struct kmem_list3
*l3
;
3458 int node
= numa_node_id();
3460 batchcount
= ac
->batchcount
;
3462 BUG_ON(!batchcount
|| batchcount
> ac
->avail
);
3465 l3
= cachep
->nodelists
[node
];
3466 spin_lock(&l3
->list_lock
);
3468 struct array_cache
*shared_array
= l3
->shared
;
3469 int max
= shared_array
->limit
- shared_array
->avail
;
3471 if (batchcount
> max
)
3473 memcpy(&(shared_array
->entry
[shared_array
->avail
]),
3474 ac
->entry
, sizeof(void *) * batchcount
);
3475 shared_array
->avail
+= batchcount
;
3480 free_block(cachep
, ac
->entry
, batchcount
, node
);
3485 struct list_head
*p
;
3487 p
= l3
->slabs_free
.next
;
3488 while (p
!= &(l3
->slabs_free
)) {
3491 slabp
= list_entry(p
, struct slab
, list
);
3492 BUG_ON(slabp
->inuse
);
3497 STATS_SET_FREEABLE(cachep
, i
);
3500 spin_unlock(&l3
->list_lock
);
3501 ac
->avail
-= batchcount
;
3502 memmove(ac
->entry
, &(ac
->entry
[batchcount
]), sizeof(void *)*ac
->avail
);
3506 * Release an obj back to its cache. If the obj has a constructed state, it must
3507 * be in this state _before_ it is released. Called with disabled ints.
3509 static inline void __cache_free(struct kmem_cache
*cachep
, void *objp
)
3511 struct array_cache
*ac
= cpu_cache_get(cachep
);
3514 kmemleak_free_recursive(objp
, cachep
->flags
);
3515 objp
= cache_free_debugcheck(cachep
, objp
, __builtin_return_address(0));
3517 kmemcheck_slab_free(cachep
, objp
, obj_size(cachep
));
3520 * Skip calling cache_free_alien() when the platform is not numa.
3521 * This will avoid cache misses that happen while accessing slabp (which
3522 * is per page memory reference) to get nodeid. Instead use a global
3523 * variable to skip the call, which is mostly likely to be present in
3526 if (nr_online_nodes
> 1 && cache_free_alien(cachep
, objp
))
3529 if (likely(ac
->avail
< ac
->limit
)) {
3530 STATS_INC_FREEHIT(cachep
);
3531 ac
->entry
[ac
->avail
++] = objp
;
3534 STATS_INC_FREEMISS(cachep
);
3535 cache_flusharray(cachep
, ac
);
3536 ac
->entry
[ac
->avail
++] = objp
;
3541 * kmem_cache_alloc - Allocate an object
3542 * @cachep: The cache to allocate from.
3543 * @flags: See kmalloc().
3545 * Allocate an object from this cache. The flags are only relevant
3546 * if the cache has no available objects.
3548 void *kmem_cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3550 void *ret
= __cache_alloc(cachep
, flags
, __builtin_return_address(0));
3552 trace_kmem_cache_alloc(_RET_IP_
, ret
,
3553 obj_size(cachep
), cachep
->buffer_size
, flags
);
3557 EXPORT_SYMBOL(kmem_cache_alloc
);
3559 #ifdef CONFIG_KMEMTRACE
3560 void *kmem_cache_alloc_notrace(struct kmem_cache
*cachep
, gfp_t flags
)
3562 return __cache_alloc(cachep
, flags
, __builtin_return_address(0));
3564 EXPORT_SYMBOL(kmem_cache_alloc_notrace
);
3568 * kmem_ptr_validate - check if an untrusted pointer might be a slab entry.
3569 * @cachep: the cache we're checking against
3570 * @ptr: pointer to validate
3572 * This verifies that the untrusted pointer looks sane;
3573 * it is _not_ a guarantee that the pointer is actually
3574 * part of the slab cache in question, but it at least
3575 * validates that the pointer can be dereferenced and
3576 * looks half-way sane.
3578 * Currently only used for dentry validation.
3580 int kmem_ptr_validate(struct kmem_cache
*cachep
, const void *ptr
)
3582 unsigned long addr
= (unsigned long)ptr
;
3583 unsigned long min_addr
= PAGE_OFFSET
;
3584 unsigned long align_mask
= BYTES_PER_WORD
- 1;
3585 unsigned long size
= cachep
->buffer_size
;
3588 if (unlikely(addr
< min_addr
))
3590 if (unlikely(addr
> (unsigned long)high_memory
- size
))
3592 if (unlikely(addr
& align_mask
))
3594 if (unlikely(!kern_addr_valid(addr
)))
3596 if (unlikely(!kern_addr_valid(addr
+ size
- 1)))
3598 page
= virt_to_page(ptr
);
3599 if (unlikely(!PageSlab(page
)))
3601 if (unlikely(page_get_cache(page
) != cachep
))
3609 void *kmem_cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
3611 void *ret
= __cache_alloc_node(cachep
, flags
, nodeid
,
3612 __builtin_return_address(0));
3614 trace_kmem_cache_alloc_node(_RET_IP_
, ret
,
3615 obj_size(cachep
), cachep
->buffer_size
,
3620 EXPORT_SYMBOL(kmem_cache_alloc_node
);
3622 #ifdef CONFIG_KMEMTRACE
3623 void *kmem_cache_alloc_node_notrace(struct kmem_cache
*cachep
,
3627 return __cache_alloc_node(cachep
, flags
, nodeid
,
3628 __builtin_return_address(0));
3630 EXPORT_SYMBOL(kmem_cache_alloc_node_notrace
);
3633 static __always_inline
void *
3634 __do_kmalloc_node(size_t size
, gfp_t flags
, int node
, void *caller
)
3636 struct kmem_cache
*cachep
;
3639 cachep
= kmem_find_general_cachep(size
, flags
);
3640 if (unlikely(ZERO_OR_NULL_PTR(cachep
)))
3642 ret
= kmem_cache_alloc_node_notrace(cachep
, flags
, node
);
3644 trace_kmalloc_node((unsigned long) caller
, ret
,
3645 size
, cachep
->buffer_size
, flags
, node
);
3650 #if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_KMEMTRACE)
3651 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
3653 return __do_kmalloc_node(size
, flags
, node
,
3654 __builtin_return_address(0));
3656 EXPORT_SYMBOL(__kmalloc_node
);
3658 void *__kmalloc_node_track_caller(size_t size
, gfp_t flags
,
3659 int node
, unsigned long caller
)
3661 return __do_kmalloc_node(size
, flags
, node
, (void *)caller
);
3663 EXPORT_SYMBOL(__kmalloc_node_track_caller
);
3665 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
3667 return __do_kmalloc_node(size
, flags
, node
, NULL
);
3669 EXPORT_SYMBOL(__kmalloc_node
);
3670 #endif /* CONFIG_DEBUG_SLAB */
3671 #endif /* CONFIG_NUMA */
3674 * __do_kmalloc - allocate memory
3675 * @size: how many bytes of memory are required.
3676 * @flags: the type of memory to allocate (see kmalloc).
3677 * @caller: function caller for debug tracking of the caller
3679 static __always_inline
void *__do_kmalloc(size_t size
, gfp_t flags
,
3682 struct kmem_cache
*cachep
;
3685 /* If you want to save a few bytes .text space: replace
3687 * Then kmalloc uses the uninlined functions instead of the inline
3690 cachep
= __find_general_cachep(size
, flags
);
3691 if (unlikely(ZERO_OR_NULL_PTR(cachep
)))
3693 ret
= __cache_alloc(cachep
, flags
, caller
);
3695 trace_kmalloc((unsigned long) caller
, ret
,
3696 size
, cachep
->buffer_size
, flags
);
3702 #if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_KMEMTRACE)
3703 void *__kmalloc(size_t size
, gfp_t flags
)
3705 return __do_kmalloc(size
, flags
, __builtin_return_address(0));
3707 EXPORT_SYMBOL(__kmalloc
);
3709 void *__kmalloc_track_caller(size_t size
, gfp_t flags
, unsigned long caller
)
3711 return __do_kmalloc(size
, flags
, (void *)caller
);
3713 EXPORT_SYMBOL(__kmalloc_track_caller
);
3716 void *__kmalloc(size_t size
, gfp_t flags
)
3718 return __do_kmalloc(size
, flags
, NULL
);
3720 EXPORT_SYMBOL(__kmalloc
);
3724 * kmem_cache_free - Deallocate an object
3725 * @cachep: The cache the allocation was from.
3726 * @objp: The previously allocated object.
3728 * Free an object which was previously allocated from this
3731 void kmem_cache_free(struct kmem_cache
*cachep
, void *objp
)
3733 unsigned long flags
;
3735 local_irq_save(flags
);
3736 debug_check_no_locks_freed(objp
, obj_size(cachep
));
3737 if (!(cachep
->flags
& SLAB_DEBUG_OBJECTS
))
3738 debug_check_no_obj_freed(objp
, obj_size(cachep
));
3739 __cache_free(cachep
, objp
);
3740 local_irq_restore(flags
);
3742 trace_kmem_cache_free(_RET_IP_
, objp
);
3744 EXPORT_SYMBOL(kmem_cache_free
);
3747 * kfree - free previously allocated memory
3748 * @objp: pointer returned by kmalloc.
3750 * If @objp is NULL, no operation is performed.
3752 * Don't free memory not originally allocated by kmalloc()
3753 * or you will run into trouble.
3755 void kfree(const void *objp
)
3757 struct kmem_cache
*c
;
3758 unsigned long flags
;
3760 trace_kfree(_RET_IP_
, objp
);
3762 if (unlikely(ZERO_OR_NULL_PTR(objp
)))
3764 local_irq_save(flags
);
3765 kfree_debugcheck(objp
);
3766 c
= virt_to_cache(objp
);
3767 debug_check_no_locks_freed(objp
, obj_size(c
));
3768 debug_check_no_obj_freed(objp
, obj_size(c
));
3769 __cache_free(c
, (void *)objp
);
3770 local_irq_restore(flags
);
3772 EXPORT_SYMBOL(kfree
);
3774 unsigned int kmem_cache_size(struct kmem_cache
*cachep
)
3776 return obj_size(cachep
);
3778 EXPORT_SYMBOL(kmem_cache_size
);
3780 const char *kmem_cache_name(struct kmem_cache
*cachep
)
3782 return cachep
->name
;
3784 EXPORT_SYMBOL_GPL(kmem_cache_name
);
3787 * This initializes kmem_list3 or resizes various caches for all nodes.
3789 static int alloc_kmemlist(struct kmem_cache
*cachep
, gfp_t gfp
)
3792 struct kmem_list3
*l3
;
3793 struct array_cache
*new_shared
;
3794 struct array_cache
**new_alien
= NULL
;
3796 for_each_online_node(node
) {
3798 if (use_alien_caches
) {
3799 new_alien
= alloc_alien_cache(node
, cachep
->limit
, gfp
);
3805 if (cachep
->shared
) {
3806 new_shared
= alloc_arraycache(node
,
3807 cachep
->shared
*cachep
->batchcount
,
3810 free_alien_cache(new_alien
);
3815 l3
= cachep
->nodelists
[node
];
3817 struct array_cache
*shared
= l3
->shared
;
3819 spin_lock_irq(&l3
->list_lock
);
3822 free_block(cachep
, shared
->entry
,
3823 shared
->avail
, node
);
3825 l3
->shared
= new_shared
;
3827 l3
->alien
= new_alien
;
3830 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3831 cachep
->batchcount
+ cachep
->num
;
3832 spin_unlock_irq(&l3
->list_lock
);
3834 free_alien_cache(new_alien
);
3837 l3
= kmalloc_node(sizeof(struct kmem_list3
), gfp
, node
);
3839 free_alien_cache(new_alien
);
3844 kmem_list3_init(l3
);
3845 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
3846 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
3847 l3
->shared
= new_shared
;
3848 l3
->alien
= new_alien
;
3849 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3850 cachep
->batchcount
+ cachep
->num
;
3851 cachep
->nodelists
[node
] = l3
;
3856 if (!cachep
->next
.next
) {
3857 /* Cache is not active yet. Roll back what we did */
3860 if (cachep
->nodelists
[node
]) {
3861 l3
= cachep
->nodelists
[node
];
3864 free_alien_cache(l3
->alien
);
3866 cachep
->nodelists
[node
] = NULL
;
3874 struct ccupdate_struct
{
3875 struct kmem_cache
*cachep
;
3876 struct array_cache
*new[NR_CPUS
];
3879 static void do_ccupdate_local(void *info
)
3881 struct ccupdate_struct
*new = info
;
3882 struct array_cache
*old
;
3885 old
= cpu_cache_get(new->cachep
);
3887 new->cachep
->array
[smp_processor_id()] = new->new[smp_processor_id()];
3888 new->new[smp_processor_id()] = old
;
3891 /* Always called with the cache_chain_mutex held */
3892 static int do_tune_cpucache(struct kmem_cache
*cachep
, int limit
,
3893 int batchcount
, int shared
, gfp_t gfp
)
3895 struct ccupdate_struct
*new;
3898 new = kzalloc(sizeof(*new), gfp
);
3902 for_each_online_cpu(i
) {
3903 new->new[i
] = alloc_arraycache(cpu_to_node(i
), limit
,
3906 for (i
--; i
>= 0; i
--)
3912 new->cachep
= cachep
;
3914 on_each_cpu(do_ccupdate_local
, (void *)new, 1);
3917 cachep
->batchcount
= batchcount
;
3918 cachep
->limit
= limit
;
3919 cachep
->shared
= shared
;
3921 for_each_online_cpu(i
) {
3922 struct array_cache
*ccold
= new->new[i
];
3925 spin_lock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
3926 free_block(cachep
, ccold
->entry
, ccold
->avail
, cpu_to_node(i
));
3927 spin_unlock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
3931 return alloc_kmemlist(cachep
, gfp
);
3934 /* Called with cache_chain_mutex held always */
3935 static int enable_cpucache(struct kmem_cache
*cachep
, gfp_t gfp
)
3941 * The head array serves three purposes:
3942 * - create a LIFO ordering, i.e. return objects that are cache-warm
3943 * - reduce the number of spinlock operations.
3944 * - reduce the number of linked list operations on the slab and
3945 * bufctl chains: array operations are cheaper.
3946 * The numbers are guessed, we should auto-tune as described by
3949 if (cachep
->buffer_size
> 131072)
3951 else if (cachep
->buffer_size
> PAGE_SIZE
)
3953 else if (cachep
->buffer_size
> 1024)
3955 else if (cachep
->buffer_size
> 256)
3961 * CPU bound tasks (e.g. network routing) can exhibit cpu bound
3962 * allocation behaviour: Most allocs on one cpu, most free operations
3963 * on another cpu. For these cases, an efficient object passing between
3964 * cpus is necessary. This is provided by a shared array. The array
3965 * replaces Bonwick's magazine layer.
3966 * On uniprocessor, it's functionally equivalent (but less efficient)
3967 * to a larger limit. Thus disabled by default.
3970 if (cachep
->buffer_size
<= PAGE_SIZE
&& num_possible_cpus() > 1)
3975 * With debugging enabled, large batchcount lead to excessively long
3976 * periods with disabled local interrupts. Limit the batchcount
3981 err
= do_tune_cpucache(cachep
, limit
, (limit
+ 1) / 2, shared
, gfp
);
3983 printk(KERN_ERR
"enable_cpucache failed for %s, error %d.\n",
3984 cachep
->name
, -err
);
3989 * Drain an array if it contains any elements taking the l3 lock only if
3990 * necessary. Note that the l3 listlock also protects the array_cache
3991 * if drain_array() is used on the shared array.
3993 void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
3994 struct array_cache
*ac
, int force
, int node
)
3998 if (!ac
|| !ac
->avail
)
4000 if (ac
->touched
&& !force
) {
4003 spin_lock_irq(&l3
->list_lock
);
4005 tofree
= force
? ac
->avail
: (ac
->limit
+ 4) / 5;
4006 if (tofree
> ac
->avail
)
4007 tofree
= (ac
->avail
+ 1) / 2;
4008 free_block(cachep
, ac
->entry
, tofree
, node
);
4009 ac
->avail
-= tofree
;
4010 memmove(ac
->entry
, &(ac
->entry
[tofree
]),
4011 sizeof(void *) * ac
->avail
);
4013 spin_unlock_irq(&l3
->list_lock
);
4018 * cache_reap - Reclaim memory from caches.
4019 * @w: work descriptor
4021 * Called from workqueue/eventd every few seconds.
4023 * - clear the per-cpu caches for this CPU.
4024 * - return freeable pages to the main free memory pool.
4026 * If we cannot acquire the cache chain mutex then just give up - we'll try
4027 * again on the next iteration.
4029 static void cache_reap(struct work_struct
*w
)
4031 struct kmem_cache
*searchp
;
4032 struct kmem_list3
*l3
;
4033 int node
= numa_node_id();
4034 struct delayed_work
*work
= to_delayed_work(w
);
4036 if (!mutex_trylock(&cache_chain_mutex
))
4037 /* Give up. Setup the next iteration. */
4040 list_for_each_entry(searchp
, &cache_chain
, next
) {
4044 * We only take the l3 lock if absolutely necessary and we
4045 * have established with reasonable certainty that
4046 * we can do some work if the lock was obtained.
4048 l3
= searchp
->nodelists
[node
];
4050 reap_alien(searchp
, l3
);
4052 drain_array(searchp
, l3
, cpu_cache_get(searchp
), 0, node
);
4055 * These are racy checks but it does not matter
4056 * if we skip one check or scan twice.
4058 if (time_after(l3
->next_reap
, jiffies
))
4061 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
;
4063 drain_array(searchp
, l3
, l3
->shared
, 0, node
);
4065 if (l3
->free_touched
)
4066 l3
->free_touched
= 0;
4070 freed
= drain_freelist(searchp
, l3
, (l3
->free_limit
+
4071 5 * searchp
->num
- 1) / (5 * searchp
->num
));
4072 STATS_ADD_REAPED(searchp
, freed
);
4078 mutex_unlock(&cache_chain_mutex
);
4081 /* Set up the next iteration */
4082 schedule_delayed_work(work
, round_jiffies_relative(REAPTIMEOUT_CPUC
));
4085 #ifdef CONFIG_SLABINFO
4087 static void print_slabinfo_header(struct seq_file
*m
)
4090 * Output format version, so at least we can change it
4091 * without _too_ many complaints.
4094 seq_puts(m
, "slabinfo - version: 2.1 (statistics)\n");
4096 seq_puts(m
, "slabinfo - version: 2.1\n");
4098 seq_puts(m
, "# name <active_objs> <num_objs> <objsize> "
4099 "<objperslab> <pagesperslab>");
4100 seq_puts(m
, " : tunables <limit> <batchcount> <sharedfactor>");
4101 seq_puts(m
, " : slabdata <active_slabs> <num_slabs> <sharedavail>");
4103 seq_puts(m
, " : globalstat <listallocs> <maxobjs> <grown> <reaped> "
4104 "<error> <maxfreeable> <nodeallocs> <remotefrees> <alienoverflow>");
4105 seq_puts(m
, " : cpustat <allochit> <allocmiss> <freehit> <freemiss>");
4110 static void *s_start(struct seq_file
*m
, loff_t
*pos
)
4114 mutex_lock(&cache_chain_mutex
);
4116 print_slabinfo_header(m
);
4118 return seq_list_start(&cache_chain
, *pos
);
4121 static void *s_next(struct seq_file
*m
, void *p
, loff_t
*pos
)
4123 return seq_list_next(p
, &cache_chain
, pos
);
4126 static void s_stop(struct seq_file
*m
, void *p
)
4128 mutex_unlock(&cache_chain_mutex
);
4131 static int s_show(struct seq_file
*m
, void *p
)
4133 struct kmem_cache
*cachep
= list_entry(p
, struct kmem_cache
, next
);
4135 unsigned long active_objs
;
4136 unsigned long num_objs
;
4137 unsigned long active_slabs
= 0;
4138 unsigned long num_slabs
, free_objects
= 0, shared_avail
= 0;
4142 struct kmem_list3
*l3
;
4146 for_each_online_node(node
) {
4147 l3
= cachep
->nodelists
[node
];
4152 spin_lock_irq(&l3
->list_lock
);
4154 list_for_each_entry(slabp
, &l3
->slabs_full
, list
) {
4155 if (slabp
->inuse
!= cachep
->num
&& !error
)
4156 error
= "slabs_full accounting error";
4157 active_objs
+= cachep
->num
;
4160 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
) {
4161 if (slabp
->inuse
== cachep
->num
&& !error
)
4162 error
= "slabs_partial inuse accounting error";
4163 if (!slabp
->inuse
&& !error
)
4164 error
= "slabs_partial/inuse accounting error";
4165 active_objs
+= slabp
->inuse
;
4168 list_for_each_entry(slabp
, &l3
->slabs_free
, list
) {
4169 if (slabp
->inuse
&& !error
)
4170 error
= "slabs_free/inuse accounting error";
4173 free_objects
+= l3
->free_objects
;
4175 shared_avail
+= l3
->shared
->avail
;
4177 spin_unlock_irq(&l3
->list_lock
);
4179 num_slabs
+= active_slabs
;
4180 num_objs
= num_slabs
* cachep
->num
;
4181 if (num_objs
- active_objs
!= free_objects
&& !error
)
4182 error
= "free_objects accounting error";
4184 name
= cachep
->name
;
4186 printk(KERN_ERR
"slab: cache %s error: %s\n", name
, error
);
4188 seq_printf(m
, "%-17s %6lu %6lu %6u %4u %4d",
4189 name
, active_objs
, num_objs
, cachep
->buffer_size
,
4190 cachep
->num
, (1 << cachep
->gfporder
));
4191 seq_printf(m
, " : tunables %4u %4u %4u",
4192 cachep
->limit
, cachep
->batchcount
, cachep
->shared
);
4193 seq_printf(m
, " : slabdata %6lu %6lu %6lu",
4194 active_slabs
, num_slabs
, shared_avail
);
4197 unsigned long high
= cachep
->high_mark
;
4198 unsigned long allocs
= cachep
->num_allocations
;
4199 unsigned long grown
= cachep
->grown
;
4200 unsigned long reaped
= cachep
->reaped
;
4201 unsigned long errors
= cachep
->errors
;
4202 unsigned long max_freeable
= cachep
->max_freeable
;
4203 unsigned long node_allocs
= cachep
->node_allocs
;
4204 unsigned long node_frees
= cachep
->node_frees
;
4205 unsigned long overflows
= cachep
->node_overflow
;
4207 seq_printf(m
, " : globalstat %7lu %6lu %5lu %4lu \
4208 %4lu %4lu %4lu %4lu %4lu", allocs
, high
, grown
,
4209 reaped
, errors
, max_freeable
, node_allocs
,
4210 node_frees
, overflows
);
4214 unsigned long allochit
= atomic_read(&cachep
->allochit
);
4215 unsigned long allocmiss
= atomic_read(&cachep
->allocmiss
);
4216 unsigned long freehit
= atomic_read(&cachep
->freehit
);
4217 unsigned long freemiss
= atomic_read(&cachep
->freemiss
);
4219 seq_printf(m
, " : cpustat %6lu %6lu %6lu %6lu",
4220 allochit
, allocmiss
, freehit
, freemiss
);
4228 * slabinfo_op - iterator that generates /proc/slabinfo
4237 * num-pages-per-slab
4238 * + further values on SMP and with statistics enabled
4241 static const struct seq_operations slabinfo_op
= {
4248 #define MAX_SLABINFO_WRITE 128
4250 * slabinfo_write - Tuning for the slab allocator
4252 * @buffer: user buffer
4253 * @count: data length
4256 ssize_t
slabinfo_write(struct file
*file
, const char __user
* buffer
,
4257 size_t count
, loff_t
*ppos
)
4259 char kbuf
[MAX_SLABINFO_WRITE
+ 1], *tmp
;
4260 int limit
, batchcount
, shared
, res
;
4261 struct kmem_cache
*cachep
;
4263 if (count
> MAX_SLABINFO_WRITE
)
4265 if (copy_from_user(&kbuf
, buffer
, count
))
4267 kbuf
[MAX_SLABINFO_WRITE
] = '\0';
4269 tmp
= strchr(kbuf
, ' ');
4274 if (sscanf(tmp
, " %d %d %d", &limit
, &batchcount
, &shared
) != 3)
4277 /* Find the cache in the chain of caches. */
4278 mutex_lock(&cache_chain_mutex
);
4280 list_for_each_entry(cachep
, &cache_chain
, next
) {
4281 if (!strcmp(cachep
->name
, kbuf
)) {
4282 if (limit
< 1 || batchcount
< 1 ||
4283 batchcount
> limit
|| shared
< 0) {
4286 res
= do_tune_cpucache(cachep
, limit
,
4293 mutex_unlock(&cache_chain_mutex
);
4299 static int slabinfo_open(struct inode
*inode
, struct file
*file
)
4301 return seq_open(file
, &slabinfo_op
);
4304 static const struct file_operations proc_slabinfo_operations
= {
4305 .open
= slabinfo_open
,
4307 .write
= slabinfo_write
,
4308 .llseek
= seq_lseek
,
4309 .release
= seq_release
,
4312 #ifdef CONFIG_DEBUG_SLAB_LEAK
4314 static void *leaks_start(struct seq_file
*m
, loff_t
*pos
)
4316 mutex_lock(&cache_chain_mutex
);
4317 return seq_list_start(&cache_chain
, *pos
);
4320 static inline int add_caller(unsigned long *n
, unsigned long v
)
4330 unsigned long *q
= p
+ 2 * i
;
4344 memmove(p
+ 2, p
, n
[1] * 2 * sizeof(unsigned long) - ((void *)p
- (void *)n
));
4350 static void handle_slab(unsigned long *n
, struct kmem_cache
*c
, struct slab
*s
)
4356 for (i
= 0, p
= s
->s_mem
; i
< c
->num
; i
++, p
+= c
->buffer_size
) {
4357 if (slab_bufctl(s
)[i
] != BUFCTL_ACTIVE
)
4359 if (!add_caller(n
, (unsigned long)*dbg_userword(c
, p
)))
4364 static void show_symbol(struct seq_file
*m
, unsigned long address
)
4366 #ifdef CONFIG_KALLSYMS
4367 unsigned long offset
, size
;
4368 char modname
[MODULE_NAME_LEN
], name
[KSYM_NAME_LEN
];
4370 if (lookup_symbol_attrs(address
, &size
, &offset
, modname
, name
) == 0) {
4371 seq_printf(m
, "%s+%#lx/%#lx", name
, offset
, size
);
4373 seq_printf(m
, " [%s]", modname
);
4377 seq_printf(m
, "%p", (void *)address
);
4380 static int leaks_show(struct seq_file
*m
, void *p
)
4382 struct kmem_cache
*cachep
= list_entry(p
, struct kmem_cache
, next
);
4384 struct kmem_list3
*l3
;
4386 unsigned long *n
= m
->private;
4390 if (!(cachep
->flags
& SLAB_STORE_USER
))
4392 if (!(cachep
->flags
& SLAB_RED_ZONE
))
4395 /* OK, we can do it */
4399 for_each_online_node(node
) {
4400 l3
= cachep
->nodelists
[node
];
4405 spin_lock_irq(&l3
->list_lock
);
4407 list_for_each_entry(slabp
, &l3
->slabs_full
, list
)
4408 handle_slab(n
, cachep
, slabp
);
4409 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
)
4410 handle_slab(n
, cachep
, slabp
);
4411 spin_unlock_irq(&l3
->list_lock
);
4413 name
= cachep
->name
;
4415 /* Increase the buffer size */
4416 mutex_unlock(&cache_chain_mutex
);
4417 m
->private = kzalloc(n
[0] * 4 * sizeof(unsigned long), GFP_KERNEL
);
4419 /* Too bad, we are really out */
4421 mutex_lock(&cache_chain_mutex
);
4424 *(unsigned long *)m
->private = n
[0] * 2;
4426 mutex_lock(&cache_chain_mutex
);
4427 /* Now make sure this entry will be retried */
4431 for (i
= 0; i
< n
[1]; i
++) {
4432 seq_printf(m
, "%s: %lu ", name
, n
[2*i
+3]);
4433 show_symbol(m
, n
[2*i
+2]);
4440 static const struct seq_operations slabstats_op
= {
4441 .start
= leaks_start
,
4447 static int slabstats_open(struct inode
*inode
, struct file
*file
)
4449 unsigned long *n
= kzalloc(PAGE_SIZE
, GFP_KERNEL
);
4452 ret
= seq_open(file
, &slabstats_op
);
4454 struct seq_file
*m
= file
->private_data
;
4455 *n
= PAGE_SIZE
/ (2 * sizeof(unsigned long));
4464 static const struct file_operations proc_slabstats_operations
= {
4465 .open
= slabstats_open
,
4467 .llseek
= seq_lseek
,
4468 .release
= seq_release_private
,
4472 static int __init
slab_proc_init(void)
4474 proc_create("slabinfo",S_IWUSR
|S_IRUGO
,NULL
,&proc_slabinfo_operations
);
4475 #ifdef CONFIG_DEBUG_SLAB_LEAK
4476 proc_create("slab_allocators", 0, NULL
, &proc_slabstats_operations
);
4480 module_init(slab_proc_init
);
4484 * ksize - get the actual amount of memory allocated for a given object
4485 * @objp: Pointer to the object
4487 * kmalloc may internally round up allocations and return more memory
4488 * than requested. ksize() can be used to determine the actual amount of
4489 * memory allocated. The caller may use this additional memory, even though
4490 * a smaller amount of memory was initially specified with the kmalloc call.
4491 * The caller must guarantee that objp points to a valid object previously
4492 * allocated with either kmalloc() or kmem_cache_alloc(). The object
4493 * must not be freed during the duration of the call.
4495 size_t ksize(const void *objp
)
4498 if (unlikely(objp
== ZERO_SIZE_PTR
))
4501 return obj_size(virt_to_cache(objp
));
4503 EXPORT_SYMBOL(ksize
);