1 c-qcam - Connectix Color QuickCam video4linux kernel driver
3 Copyright (C) 1999 Dave Forrest <drf5n@virginia.edu>
4 released under GNU GPL.
6 1999-12-08 Dave Forrest, written with kernel version 2.2.12 in mind
12 2.0 Compilation, Installation, and Configuration
14 4.0 Future Work / current work arounds
15 9.0 Sample Program, v4lgrab
16 10.0 Other Information
21 The file ../drivers/char/c-qcam.c is a device driver for the
22 Logitech (nee Connectix) parallel port interface color CCD camera.
23 This is a fairly inexpensive device for capturing images. Logitech
24 does not currently provide information for developers, but many people
25 have engineered several solutions for non-Microsoft use of the Color
30 I spent a number of hours trying to get my camera to work, and I
31 hope this document saves you some time. My camera will not work with
32 the 2.2.13 kernel as distributed, but with a few patches to the
33 module, I was able to grab some frames. See 4.0, Future Work.
37 2.0 Compilation, Installation, and Configuration
39 The c-qcam depends on parallel port support, video4linux, and the
40 Color Quickcam. It is also nice to have the parallel port readback
41 support enabled. I enabled these as modules during the kernel
42 configuration. The appropriate flags are:
44 CONFIG_PRINTER M for lp.o, parport.o parport_pc.o modules
45 CONFIG_PNP_PARPORT M for autoprobe.o IEEE1284 readback module
46 CONFIG_PRINTER_READBACK M for parport_probe.o IEEE1284 readback module
47 CONFIG_VIDEO_DEV M for videodev.o video4linux module
48 CONFIG_VIDEO_CQCAM M for c-qcam.o Color Quickcam module
50 With these flags, the kernel should compile and install the modules.
51 To record and monitor the compilation, I use:
55 make modules_install ;
57 less log # then a capital 'F' to watch the progress
59 But that is my personal preference.
63 The configuration requires module configuration and device
64 configuration. I like kmod or kerneld process with the
65 /etc/modprobe.conf file so the modules can automatically load/unload as
66 they are used. The video devices could already exist, be generated
67 using MAKEDEV, or need to be created. The following sections detail
71 2.1 Module Configuration
73 Using modules requires a bit of work to install and pass the
74 parameters. Understand that entries in /etc/modprobe.conf of:
76 alias parport_lowlevel parport_pc
77 options parport_pc io=0x378 irq=none
78 alias char-major-81 videodev
79 alias char-major-81-0 c-qcam
81 will cause the kmod/modprobe to do certain things. If you are
82 using kmod, then a request for a 'char-major-81-0' will cause
83 the 'c-qcam' module to load. If you have other video sources with
84 modules, you might want to assign the different minor numbers to
87 2.2 Device Configuration
89 At this point, we need to ensure that the device files exist.
90 Video4linux used the /dev/video* files, and we want to attach the
91 Quickcam to one of these.
93 ls -lad /dev/video* # should produce a list of the video devices
95 If the video devices do not exist, you can create them with:
99 for ii in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
100 mknod video$ii c 81 $ii # char-major-81-[0-16]
101 chown root.root video$ii # owned by root
102 chmod 600 video$ii # read/writable by root only
105 Lots of people connect video0 to video and bttv, but you might want
106 your c-qcam to mean something more:
108 ln -s video0 c-qcam # make /dev/c-qcam a working file
109 ln -s c-qcam video # make /dev/c-qcam your default video source
111 But these are conveniences. The important part is to make the proper
112 special character files with the right major and minor numbers. All
113 of the special device files are listed in ../devices.txt. If you
114 would like the c-qcam readable by non-root users, you will need to
115 change the permissions.
119 If the sample program below, v4lgrab, gives you output then
120 everything is working.
122 v4lgrab | wc # should give you a count of characters
124 Otherwise, you have some problem.
126 The c-qcam is IEEE1284 compatible, so if you are using the proc file
127 system (CONFIG_PROC_FS), the parallel printer support
128 (CONFIG_PRINTER), the IEEE 1284 system,(CONFIG_PRINTER_READBACK), you
129 should be able to read some identification from your quickcam with
132 modprobe -v parport_probe
133 cat /proc/parport/PORTNUMBER/autoprobe
136 MODEL:Color QuickCam 2.0;
137 MANUFACTURER:Connectix;
139 A good response to this indicates that your color quickcam is alive
140 and well. A common problem is that the current driver does not
141 reliably detect a c-qcam, even though one is attached. In this case,
147 Returns a message saying "Device or resource busy" Development is
148 currently underway, but a workaround is to patch the module to skip
149 the detection code and attach to a defined port. Check the
150 video4linux mailing list and archive for more current information.
154 Can you get an image?
155 v4lgrab >qcam.ppm ; wc qcam.ppm ; xv qcam.ppm
157 Is a working c-qcam connected to the port?
158 grep ^ /proc/parport/?/autoprobe
160 Do the /dev/video* files exist?
163 Is the c-qcam module loaded?
164 modprobe -v c-qcam ; lsmod
166 Does the camera work with alternate programs? cqcam, etc?
171 4.0 Future Work / current workarounds
173 It is hoped that this section will soon become obsolete, but if it
174 isn't, you might try patching the c-qcam module to add a parport=xxx
175 option as in the bw-qcam module so you can specify the parallel port:
177 insmod -v c-qcam parport=0
179 And bypass the detection code, see ../../drivers/char/c-qcam.c and
180 look for the 'qc_detect' code and call.
182 Note that there is work in progress to change the video4linux API,
183 this work is documented at the video4linux2 site listed below.
186 9.0 --- A sample program using v4lgrabber,
188 v4lgrab is a simple image grabber that will copy a frame from the
189 first video device, /dev/video0 to standard output in portable pixmap
190 format (.ppm) To produce .jpg output, you can use it like this:
191 'v4lgrab | convert - c-qcam.jpg'
194 10.0 --- Other Information
196 Use the ../../Maintainers file, particularly the VIDEO FOR LINUX and PARALLEL
197 PORT SUPPORT sections
199 The video4linux page:
200 http://roadrunner.swansea.linux.org.uk/v4l.shtml
202 The video4linux2 page:
203 http://millennium.diads.com/bdirks/v4l2.htm
205 Some web pages about the quickcams:
206 http://www.dkfz-heidelberg.de/Macromol/wedemann/mini-HOWTO-cqcam.html
208 http://www.crynwr.com/qcpc/ QuickCam Third-Party Drivers
209 http://www.crynwr.com/qcpc/re.html Some Reverse Engineering
210 http://cse.unl.edu/~cluening/gqcam/ v4l client
211 http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
212 ftp://ftp.cs.unm.edu/pub/chris/quickcam/ Has lots of drivers
213 http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information