ARM: PMU: move CPU PMU platform device handling and init into perf

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mtd / maps / dilnetpc.c

/* dilnetpc.c -- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP"
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 *
 * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
 * featuring the AMD Elan SC410 processor. There are two variants of this
 * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
 * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs
 * flash and 16 megs of RAM.
 * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
 * and http://www.ssv-embedded.de/ssv/pc104/p170.htm
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>

#include <asm/io.h>

/*
** The DIL/NetPC keeps its BIOS in two distinct flash blocks.
** Destroying any of these blocks transforms the DNPC into
** a paperweight (albeit not a very useful one, considering
** it only weighs a few grams).
**
** Therefore, the BIOS blocks must never be erased or written to
** except by people who know exactly what they are doing (e.g.
** to install a BIOS update). These partitions are marked read-only
** by default, but can be made read/write by undefining
** DNPC_BIOS_BLOCKS_WRITEPROTECTED:
*/
#define DNPC_BIOS_BLOCKS_WRITEPROTECTED

/*
** The ID string (in ROM) is checked to determine whether we
** are running on a DNP/1486 or ADNP/1486
*/
#define BIOSID_BASE     0x000fe100

#define ID_DNPC "DNP1486"
#define ID_ADNP "ADNP1486"

/*
** Address where the flash should appear in CPU space
*/
#define FLASH_BASE      0x2000000

/*
** Chip Setup and Control (CSC) indexed register space
*/
#define CSC_INDEX       0x22
#define CSC_DATA        0x23

#define CSC_MMSWAR      0x30    /* MMS window C-F attributes register */
#define CSC_MMSWDSR     0x31    /* MMS window C-F device select register */

#define CSC_RBWR        0xa7    /* GPIO Read-Back/Write Register B */

#define CSC_CR          0xd0    /* internal I/O device disable/Echo */
                                /* Z-bus/configuration register */

#define CSC_PCCMDCR     0xf1    /* PC card mode and DMA control register */


/*
** PC Card indexed register space:
*/

#define PCC_INDEX       0x3e0
#define PCC_DATA        0x3e1

#define PCC_AWER_B              0x46    /* Socket B Address Window enable register */
#define PCC_MWSAR_1_Lo  0x58    /* memory window 1 start address low register */
#define PCC_MWSAR_1_Hi  0x59    /* memory window 1 start address high register */
#define PCC_MWEAR_1_Lo  0x5A    /* memory window 1 stop address low register */
#define PCC_MWEAR_1_Hi  0x5B    /* memory window 1 stop address high register */
#define PCC_MWAOR_1_Lo  0x5C    /* memory window 1 address offset low register */
#define PCC_MWAOR_1_Hi  0x5D    /* memory window 1 address offset high register */


/*
** Access to SC4x0's Chip Setup and Control (CSC)
** and PC Card (PCC) indexed registers:
*/
static inline void setcsc(int reg, unsigned char data)
{
        outb(reg, CSC_INDEX);
        outb(data, CSC_DATA);
}

static inline unsigned char getcsc(int reg)
{
        outb(reg, CSC_INDEX);
        return(inb(CSC_DATA));
}

static inline void setpcc(int reg, unsigned char data)
{
        outb(reg, PCC_INDEX);
        outb(data, PCC_DATA);
}

static inline unsigned char getpcc(int reg)
{
        outb(reg, PCC_INDEX);
        return(inb(PCC_DATA));
}


/*
************************************************************
** Enable access to DIL/NetPC's flash by mapping it into
** the SC4x0's MMS Window C.
************************************************************
*/
static void dnpc_map_flash(unsigned long flash_base, unsigned long flash_size)
{
        unsigned long flash_end = flash_base + flash_size - 1;

        /*
        ** enable setup of MMS windows C-F:
        */
        /* - enable PC Card indexed register space */
        setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
        /* - set PC Card controller to operate in standard mode */
        setcsc(CSC_PCCMDCR, getcsc(CSC_PCCMDCR) & ~1);

        /*
        ** Program base address and end address of window
        ** where the flash ROM should appear in CPU address space
        */
        setpcc(PCC_MWSAR_1_Lo, (flash_base >> 12) & 0xff);
        setpcc(PCC_MWSAR_1_Hi, (flash_base >> 20) & 0x3f);
        setpcc(PCC_MWEAR_1_Lo, (flash_end >> 12) & 0xff);
        setpcc(PCC_MWEAR_1_Hi, (flash_end >> 20) & 0x3f);

        /* program offset of first flash location to appear in this window (0) */
        setpcc(PCC_MWAOR_1_Lo, ((0 - flash_base) >> 12) & 0xff);
        setpcc(PCC_MWAOR_1_Hi, ((0 - flash_base)>> 20) & 0x3f);

        /* set attributes for MMS window C: non-cacheable, write-enabled */
        setcsc(CSC_MMSWAR, getcsc(CSC_MMSWAR) & ~0x11);

        /* select physical device ROMCS0 (i.e. flash) for MMS Window C */
        setcsc(CSC_MMSWDSR, getcsc(CSC_MMSWDSR) & ~0x03);

        /* enable memory window 1 */
        setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) | 0x02);

        /* now disable PC Card indexed register space again */
        setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
}


/*
************************************************************
** Disable access to DIL/NetPC's flash by mapping it into
** the SC4x0's MMS Window C.
************************************************************
*/
static void dnpc_unmap_flash(void)
{
        /* - enable PC Card indexed register space */
        setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);

        /* disable memory window 1 */
        setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) & ~0x02);

        /* now disable PC Card indexed register space again */
        setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
}



/*
************************************************************
** Enable/Disable VPP to write to flash
************************************************************
*/

static DEFINE_SPINLOCK(dnpc_spin);
static int        vpp_counter = 0;
/*
** This is what has to be done for the DNP board ..
*/
static void dnp_set_vpp(struct map_info *not_used, int on)
{
        spin_lock_irq(&dnpc_spin);

        if (on)
        {
                if(++vpp_counter == 1)
                        setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x4);
        }
        else
        {
                if(--vpp_counter == 0)
                        setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4);
                else
                        BUG_ON(vpp_counter < 0);
        }
        spin_unlock_irq(&dnpc_spin);
}

/*
** .. and this the ADNP version:
*/
static void adnp_set_vpp(struct map_info *not_used, int on)
{
        spin_lock_irq(&dnpc_spin);

        if (on)
        {
                if(++vpp_counter == 1)
                        setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x8);
        }
        else
        {
                if(--vpp_counter == 0)
                        setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8);
                else
                        BUG_ON(vpp_counter < 0);
        }
        spin_unlock_irq(&dnpc_spin);
}



#define DNP_WINDOW_SIZE         0x00200000      /*  DNP flash size is 2MiB  */
#define ADNP_WINDOW_SIZE        0x00400000      /* ADNP flash size is 4MiB */
#define WINDOW_ADDR             FLASH_BASE

static struct map_info dnpc_map = {
        .name = "ADNP Flash Bank",
        .size = ADNP_WINDOW_SIZE,
        .bankwidth = 1,
        .set_vpp = adnp_set_vpp,
        .phys = WINDOW_ADDR
};

/*
** The layout of the flash is somewhat "strange":
**
** 1.  960 KiB (15 blocks) : Space for ROM Bootloader and user data
** 2.   64 KiB (1 block)   : System BIOS
** 3.  960 KiB (15 blocks) : User Data (DNP model) or
** 3. 3008 KiB (47 blocks) : User Data (ADNP model)
** 4.   64 KiB (1 block)   : System BIOS Entry
*/

static struct mtd_partition partition_info[]=
{
        {
                .name =         "ADNP boot",
                .offset =       0,
                .size =         0xf0000,
        },
        {
                .name =         "ADNP system BIOS",
                .offset =       MTDPART_OFS_NXTBLK,
                .size =         0x10000,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
                .mask_flags =   MTD_WRITEABLE,
#endif
        },
        {
                .name =         "ADNP file system",
                .offset =       MTDPART_OFS_NXTBLK,
                .size =         0x2f0000,
        },
        {
                .name =         "ADNP system BIOS entry",
                .offset =       MTDPART_OFS_NXTBLK,
                .size =         MTDPART_SIZ_FULL,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
                .mask_flags =   MTD_WRITEABLE,
#endif
        },
};

#define NUM_PARTITIONS ARRAY_SIZE(partition_info)

static struct mtd_info *mymtd;
static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
static struct mtd_info *merged_mtd;

/*
** "Highlevel" partition info:
**
** Using the MTD concat layer, we can re-arrange partitions to our
** liking: we construct a virtual MTD device by concatenating the
** partitions, specifying the sequence such that the boot block
** is immediately followed by the filesystem block (i.e. the stupid
** system BIOS block is mapped to a different place). When re-partitioning
** this concatenated MTD device, we can set the boot block size to
** an arbitrary (though erase block aligned) value i.e. not one that
** is dictated by the flash's physical layout. We can thus set the
** boot block to be e.g. 64 KB (which is fully sufficient if we want
** to boot an etherboot image) or to -say- 1.5 MB if we want to boot
** a large kernel image. In all cases, the remainder of the flash
** is available as file system space.
*/

static struct mtd_partition higlvl_partition_info[]=
{
        {
                .name =         "ADNP boot block",
                .offset =       0,
                .size =         CONFIG_MTD_DILNETPC_BOOTSIZE,
        },
        {
                .name =         "ADNP file system space",
                .offset =       MTDPART_OFS_NXTBLK,
                .size =         ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000,
        },
        {
                .name =         "ADNP system BIOS + BIOS Entry",
                .offset =       MTDPART_OFS_NXTBLK,
                .size =         MTDPART_SIZ_FULL,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
                .mask_flags =   MTD_WRITEABLE,
#endif
        },
};

#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info)


static int dnp_adnp_probe(void)
{
        char *biosid, rc = -1;

        biosid = (char*)ioremap(BIOSID_BASE, 16);
        if(biosid)
        {
                if(!strcmp(biosid, ID_DNPC))
                        rc = 1;         /* this is a DNPC  */
                else if(!strcmp(biosid, ID_ADNP))
                        rc = 0;         /* this is a ADNPC */
        }
        iounmap((void *)biosid);
        return(rc);
}


static int __init init_dnpc(void)
{
        int is_dnp;

        /*
        ** determine hardware (DNP/ADNP/invalid)
        */
        if((is_dnp = dnp_adnp_probe()) < 0)
                return -ENXIO;

        /*
        ** Things are set up for ADNP by default
        ** -> modify all that needs to be different for DNP
        */
        if(is_dnp)
        {       /*
                ** Adjust window size, select correct set_vpp function.
                ** The partitioning scheme is identical on both DNP
                ** and ADNP except for the size of the third partition.
                */
                int i;
                dnpc_map.size          = DNP_WINDOW_SIZE;
                dnpc_map.set_vpp       = dnp_set_vpp;
                partition_info[2].size = 0xf0000;

                /*
                ** increment all string pointers so the leading 'A' gets skipped,
                ** thus turning all occurrences of "ADNP ..." into "DNP ..."
                */
                ++dnpc_map.name;
                for(i = 0; i < NUM_PARTITIONS; i++)
                        ++partition_info[i].name;
                higlvl_partition_info[1].size = DNP_WINDOW_SIZE -
                        CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000;
                for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++)
                        ++higlvl_partition_info[i].name;
        }

        printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%llx\n",
                is_dnp ? "DNPC" : "ADNP", dnpc_map.size, (unsigned long long)dnpc_map.phys);

        dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);

        dnpc_map_flash(dnpc_map.phys, dnpc_map.size);

        if (!dnpc_map.virt) {
                printk("Failed to ioremap_nocache\n");
                return -EIO;
        }
        simple_map_init(&dnpc_map);

        printk("FLASH virtual address: 0x%p\n", dnpc_map.virt);

        mymtd = do_map_probe("jedec_probe", &dnpc_map);

        if (!mymtd)
                mymtd = do_map_probe("cfi_probe", &dnpc_map);

        /*
        ** If flash probes fail, try to make flashes accessible
        ** at least as ROM. Ajust erasesize in this case since
        ** the default one (128M) will break our partitioning
        */
        if (!mymtd)
                if((mymtd = do_map_probe("map_rom", &dnpc_map)))
                        mymtd->erasesize = 0x10000;

        if (!mymtd) {
                iounmap(dnpc_map.virt);
                return -ENXIO;
        }

        mymtd->owner = THIS_MODULE;

        /*
        ** Supply pointers to lowlvl_parts[] array to add_mtd_partitions()
        ** -> add_mtd_partitions() will _not_ register MTD devices for
        ** the partitions, but will instead store pointers to the MTD
        ** objects it creates into our lowlvl_parts[] array.
        ** NOTE: we arrange the pointers such that the sequence of the
        **       partitions gets re-arranged: partition #2 follows
        **       partition #0.
        */
        partition_info[0].mtdp = &lowlvl_parts[0];
        partition_info[1].mtdp = &lowlvl_parts[2];
        partition_info[2].mtdp = &lowlvl_parts[1];
        partition_info[3].mtdp = &lowlvl_parts[3];

        mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);

        /*
        ** now create a virtual MTD device by concatenating the for partitions
        ** (in the sequence given by the lowlvl_parts[] array.
        */
        merged_mtd = mtd_concat_create(lowlvl_parts, NUM_PARTITIONS, "(A)DNP Flash Concatenated");
        if(merged_mtd)
        {       /*
                ** now partition the new device the way we want it. This time,
                ** we do not supply mtd pointers in higlvl_partition_info, so
                ** add_mtd_partitions() will register the devices.
                */
                mtd_device_register(merged_mtd, higlvl_partition_info,
                                    NUM_HIGHLVL_PARTITIONS);
        }

        return 0;
}

static void __exit cleanup_dnpc(void)
{
        if(merged_mtd) {
                mtd_device_unregister(merged_mtd);
                mtd_concat_destroy(merged_mtd);
        }

        if (mymtd) {
                mtd_device_unregister(mymtd);
                map_destroy(mymtd);
        }
        if (dnpc_map.virt) {
                iounmap(dnpc_map.virt);
                dnpc_unmap_flash();
                dnpc_map.virt = NULL;
        }
}

module_init(init_dnpc);
module_exit(cleanup_dnpc);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
MODULE_DESCRIPTION("MTD map driver for SSV DIL/NetPC DNP & ADNP");