2 * Disk Array driver for HP Smart Array SAS controllers
3 * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
12 * NON INFRINGEMENT. See the GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
22 #include <linux/module.h>
23 #include <linux/interrupt.h>
24 #include <linux/types.h>
25 #include <linux/pci.h>
26 #include <linux/kernel.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
30 #include <linux/timer.h>
31 #include <linux/seq_file.h>
32 #include <linux/init.h>
33 #include <linux/spinlock.h>
34 #include <linux/compat.h>
35 #include <linux/blktrace_api.h>
36 #include <linux/uaccess.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/completion.h>
40 #include <linux/moduleparam.h>
41 #include <scsi/scsi.h>
42 #include <scsi/scsi_cmnd.h>
43 #include <scsi/scsi_device.h>
44 #include <scsi/scsi_host.h>
45 #include <scsi/scsi_tcq.h>
46 #include <linux/cciss_ioctl.h>
47 #include <linux/string.h>
48 #include <linux/bitmap.h>
49 #include <asm/atomic.h>
50 #include <linux/kthread.h>
54 /* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
55 #define HPSA_DRIVER_VERSION "2.0.2-1"
56 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
58 /* How long to wait (in milliseconds) for board to go into simple mode */
59 #define MAX_CONFIG_WAIT 30000
60 #define MAX_IOCTL_CONFIG_WAIT 1000
62 /*define how many times we will try a command because of bus resets */
63 #define MAX_CMD_RETRIES 3
65 /* Embedded module documentation macros - see modules.h */
66 MODULE_AUTHOR("Hewlett-Packard Company");
67 MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
69 MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
70 MODULE_VERSION(HPSA_DRIVER_VERSION
);
71 MODULE_LICENSE("GPL");
73 static int hpsa_allow_any
;
74 module_param(hpsa_allow_any
, int, S_IRUGO
|S_IWUSR
);
75 MODULE_PARM_DESC(hpsa_allow_any
,
76 "Allow hpsa driver to access unknown HP Smart Array hardware");
78 /* define the PCI info for the cards we can control */
79 static const struct pci_device_id hpsa_pci_device_id
[] = {
80 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3241},
81 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3243},
82 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3245},
83 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3247},
84 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3249},
85 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324a},
86 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324b},
87 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3233},
88 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3250},
89 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3251},
90 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3252},
91 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3253},
92 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3254},
93 {PCI_VENDOR_ID_HP
, PCI_ANY_ID
, PCI_ANY_ID
, PCI_ANY_ID
,
94 PCI_CLASS_STORAGE_RAID
<< 8, 0xffff << 8, 0},
98 MODULE_DEVICE_TABLE(pci
, hpsa_pci_device_id
);
100 /* board_id = Subsystem Device ID & Vendor ID
101 * product = Marketing Name for the board
102 * access = Address of the struct of function pointers
104 static struct board_type products
[] = {
105 {0x3241103C, "Smart Array P212", &SA5_access
},
106 {0x3243103C, "Smart Array P410", &SA5_access
},
107 {0x3245103C, "Smart Array P410i", &SA5_access
},
108 {0x3247103C, "Smart Array P411", &SA5_access
},
109 {0x3249103C, "Smart Array P812", &SA5_access
},
110 {0x324a103C, "Smart Array P712m", &SA5_access
},
111 {0x324b103C, "Smart Array P711m", &SA5_access
},
112 {0x3250103C, "Smart Array", &SA5_access
},
113 {0x3250113C, "Smart Array", &SA5_access
},
114 {0x3250123C, "Smart Array", &SA5_access
},
115 {0x3250133C, "Smart Array", &SA5_access
},
116 {0x3250143C, "Smart Array", &SA5_access
},
117 {0xFFFF103C, "Unknown Smart Array", &SA5_access
},
120 static int number_of_controllers
;
122 static irqreturn_t
do_hpsa_intr_intx(int irq
, void *dev_id
);
123 static irqreturn_t
do_hpsa_intr_msi(int irq
, void *dev_id
);
124 static int hpsa_ioctl(struct scsi_device
*dev
, int cmd
, void *arg
);
125 static void start_io(struct ctlr_info
*h
);
128 static int hpsa_compat_ioctl(struct scsi_device
*dev
, int cmd
, void *arg
);
131 static void cmd_free(struct ctlr_info
*h
, struct CommandList
*c
);
132 static void cmd_special_free(struct ctlr_info
*h
, struct CommandList
*c
);
133 static struct CommandList
*cmd_alloc(struct ctlr_info
*h
);
134 static struct CommandList
*cmd_special_alloc(struct ctlr_info
*h
);
135 static void fill_cmd(struct CommandList
*c
, u8 cmd
, struct ctlr_info
*h
,
136 void *buff
, size_t size
, u8 page_code
, unsigned char *scsi3addr
,
139 static int hpsa_scsi_queue_command(struct Scsi_Host
*h
, struct scsi_cmnd
*cmd
);
140 static void hpsa_scan_start(struct Scsi_Host
*);
141 static int hpsa_scan_finished(struct Scsi_Host
*sh
,
142 unsigned long elapsed_time
);
143 static int hpsa_change_queue_depth(struct scsi_device
*sdev
,
144 int qdepth
, int reason
);
146 static int hpsa_eh_device_reset_handler(struct scsi_cmnd
*scsicmd
);
147 static int hpsa_slave_alloc(struct scsi_device
*sdev
);
148 static void hpsa_slave_destroy(struct scsi_device
*sdev
);
150 static ssize_t
raid_level_show(struct device
*dev
,
151 struct device_attribute
*attr
, char *buf
);
152 static ssize_t
lunid_show(struct device
*dev
,
153 struct device_attribute
*attr
, char *buf
);
154 static ssize_t
unique_id_show(struct device
*dev
,
155 struct device_attribute
*attr
, char *buf
);
156 static ssize_t
host_show_firmware_revision(struct device
*dev
,
157 struct device_attribute
*attr
, char *buf
);
158 static void hpsa_update_scsi_devices(struct ctlr_info
*h
, int hostno
);
159 static ssize_t
host_store_rescan(struct device
*dev
,
160 struct device_attribute
*attr
, const char *buf
, size_t count
);
161 static int check_for_unit_attention(struct ctlr_info
*h
,
162 struct CommandList
*c
);
163 static void check_ioctl_unit_attention(struct ctlr_info
*h
,
164 struct CommandList
*c
);
165 /* performant mode helper functions */
166 static void calc_bucket_map(int *bucket
, int num_buckets
,
167 int nsgs
, int *bucket_map
);
168 static __devinit
void hpsa_put_ctlr_into_performant_mode(struct ctlr_info
*h
);
169 static inline u32
next_command(struct ctlr_info
*h
);
170 static int __devinit
hpsa_find_cfg_addrs(struct pci_dev
*pdev
,
171 void __iomem
*vaddr
, u32
*cfg_base_addr
, u64
*cfg_base_addr_index
,
173 static int __devinit
hpsa_pci_find_memory_BAR(struct pci_dev
*pdev
,
174 unsigned long *memory_bar
);
175 static int __devinit
hpsa_lookup_board_id(struct pci_dev
*pdev
, u32
*board_id
);
177 static DEVICE_ATTR(raid_level
, S_IRUGO
, raid_level_show
, NULL
);
178 static DEVICE_ATTR(lunid
, S_IRUGO
, lunid_show
, NULL
);
179 static DEVICE_ATTR(unique_id
, S_IRUGO
, unique_id_show
, NULL
);
180 static DEVICE_ATTR(rescan
, S_IWUSR
, NULL
, host_store_rescan
);
181 static DEVICE_ATTR(firmware_revision
, S_IRUGO
,
182 host_show_firmware_revision
, NULL
);
184 static struct device_attribute
*hpsa_sdev_attrs
[] = {
185 &dev_attr_raid_level
,
191 static struct device_attribute
*hpsa_shost_attrs
[] = {
193 &dev_attr_firmware_revision
,
197 static struct scsi_host_template hpsa_driver_template
= {
198 .module
= THIS_MODULE
,
201 .queuecommand
= hpsa_scsi_queue_command
,
202 .scan_start
= hpsa_scan_start
,
203 .scan_finished
= hpsa_scan_finished
,
204 .change_queue_depth
= hpsa_change_queue_depth
,
206 .use_clustering
= ENABLE_CLUSTERING
,
207 .eh_device_reset_handler
= hpsa_eh_device_reset_handler
,
209 .slave_alloc
= hpsa_slave_alloc
,
210 .slave_destroy
= hpsa_slave_destroy
,
212 .compat_ioctl
= hpsa_compat_ioctl
,
214 .sdev_attrs
= hpsa_sdev_attrs
,
215 .shost_attrs
= hpsa_shost_attrs
,
218 static inline struct ctlr_info
*sdev_to_hba(struct scsi_device
*sdev
)
220 unsigned long *priv
= shost_priv(sdev
->host
);
221 return (struct ctlr_info
*) *priv
;
224 static inline struct ctlr_info
*shost_to_hba(struct Scsi_Host
*sh
)
226 unsigned long *priv
= shost_priv(sh
);
227 return (struct ctlr_info
*) *priv
;
230 static int check_for_unit_attention(struct ctlr_info
*h
,
231 struct CommandList
*c
)
233 if (c
->err_info
->SenseInfo
[2] != UNIT_ATTENTION
)
236 switch (c
->err_info
->SenseInfo
[12]) {
238 dev_warn(&h
->pdev
->dev
, "hpsa%d: a state change "
239 "detected, command retried\n", h
->ctlr
);
242 dev_warn(&h
->pdev
->dev
, "hpsa%d: LUN failure "
243 "detected, action required\n", h
->ctlr
);
245 case REPORT_LUNS_CHANGED
:
246 dev_warn(&h
->pdev
->dev
, "hpsa%d: report LUN data "
247 "changed, action required\n", h
->ctlr
);
249 * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
253 dev_warn(&h
->pdev
->dev
, "hpsa%d: a power on "
254 "or device reset detected\n", h
->ctlr
);
256 case UNIT_ATTENTION_CLEARED
:
257 dev_warn(&h
->pdev
->dev
, "hpsa%d: unit attention "
258 "cleared by another initiator\n", h
->ctlr
);
261 dev_warn(&h
->pdev
->dev
, "hpsa%d: unknown "
262 "unit attention detected\n", h
->ctlr
);
268 static ssize_t
host_store_rescan(struct device
*dev
,
269 struct device_attribute
*attr
,
270 const char *buf
, size_t count
)
273 struct Scsi_Host
*shost
= class_to_shost(dev
);
274 h
= shost_to_hba(shost
);
275 hpsa_scan_start(h
->scsi_host
);
279 static ssize_t
host_show_firmware_revision(struct device
*dev
,
280 struct device_attribute
*attr
, char *buf
)
283 struct Scsi_Host
*shost
= class_to_shost(dev
);
284 unsigned char *fwrev
;
286 h
= shost_to_hba(shost
);
287 if (!h
->hba_inquiry_data
)
289 fwrev
= &h
->hba_inquiry_data
[32];
290 return snprintf(buf
, 20, "%c%c%c%c\n",
291 fwrev
[0], fwrev
[1], fwrev
[2], fwrev
[3]);
294 /* Enqueuing and dequeuing functions for cmdlists. */
295 static inline void addQ(struct hlist_head
*list
, struct CommandList
*c
)
297 hlist_add_head(&c
->list
, list
);
300 static inline u32
next_command(struct ctlr_info
*h
)
304 if (unlikely(h
->transMethod
!= CFGTBL_Trans_Performant
))
305 return h
->access
.command_completed(h
);
307 if ((*(h
->reply_pool_head
) & 1) == (h
->reply_pool_wraparound
)) {
308 a
= *(h
->reply_pool_head
); /* Next cmd in ring buffer */
309 (h
->reply_pool_head
)++;
310 h
->commands_outstanding
--;
314 /* Check for wraparound */
315 if (h
->reply_pool_head
== (h
->reply_pool
+ h
->max_commands
)) {
316 h
->reply_pool_head
= h
->reply_pool
;
317 h
->reply_pool_wraparound
^= 1;
322 /* set_performant_mode: Modify the tag for cciss performant
323 * set bit 0 for pull model, bits 3-1 for block fetch
326 static void set_performant_mode(struct ctlr_info
*h
, struct CommandList
*c
)
328 if (likely(h
->transMethod
== CFGTBL_Trans_Performant
))
329 c
->busaddr
|= 1 | (h
->blockFetchTable
[c
->Header
.SGList
] << 1);
332 static void enqueue_cmd_and_start_io(struct ctlr_info
*h
,
333 struct CommandList
*c
)
337 set_performant_mode(h
, c
);
338 spin_lock_irqsave(&h
->lock
, flags
);
342 spin_unlock_irqrestore(&h
->lock
, flags
);
345 static inline void removeQ(struct CommandList
*c
)
347 if (WARN_ON(hlist_unhashed(&c
->list
)))
349 hlist_del_init(&c
->list
);
352 static inline int is_hba_lunid(unsigned char scsi3addr
[])
354 return memcmp(scsi3addr
, RAID_CTLR_LUNID
, 8) == 0;
357 static inline int is_logical_dev_addr_mode(unsigned char scsi3addr
[])
359 return (scsi3addr
[3] & 0xC0) == 0x40;
362 static inline int is_scsi_rev_5(struct ctlr_info
*h
)
364 if (!h
->hba_inquiry_data
)
366 if ((h
->hba_inquiry_data
[2] & 0x07) == 5)
371 static const char *raid_label
[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
374 #define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
376 static ssize_t
raid_level_show(struct device
*dev
,
377 struct device_attribute
*attr
, char *buf
)
380 unsigned char rlevel
;
382 struct scsi_device
*sdev
;
383 struct hpsa_scsi_dev_t
*hdev
;
386 sdev
= to_scsi_device(dev
);
387 h
= sdev_to_hba(sdev
);
388 spin_lock_irqsave(&h
->lock
, flags
);
389 hdev
= sdev
->hostdata
;
391 spin_unlock_irqrestore(&h
->lock
, flags
);
395 /* Is this even a logical drive? */
396 if (!is_logical_dev_addr_mode(hdev
->scsi3addr
)) {
397 spin_unlock_irqrestore(&h
->lock
, flags
);
398 l
= snprintf(buf
, PAGE_SIZE
, "N/A\n");
402 rlevel
= hdev
->raid_level
;
403 spin_unlock_irqrestore(&h
->lock
, flags
);
404 if (rlevel
> RAID_UNKNOWN
)
405 rlevel
= RAID_UNKNOWN
;
406 l
= snprintf(buf
, PAGE_SIZE
, "RAID %s\n", raid_label
[rlevel
]);
410 static ssize_t
lunid_show(struct device
*dev
,
411 struct device_attribute
*attr
, char *buf
)
414 struct scsi_device
*sdev
;
415 struct hpsa_scsi_dev_t
*hdev
;
417 unsigned char lunid
[8];
419 sdev
= to_scsi_device(dev
);
420 h
= sdev_to_hba(sdev
);
421 spin_lock_irqsave(&h
->lock
, flags
);
422 hdev
= sdev
->hostdata
;
424 spin_unlock_irqrestore(&h
->lock
, flags
);
427 memcpy(lunid
, hdev
->scsi3addr
, sizeof(lunid
));
428 spin_unlock_irqrestore(&h
->lock
, flags
);
429 return snprintf(buf
, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
430 lunid
[0], lunid
[1], lunid
[2], lunid
[3],
431 lunid
[4], lunid
[5], lunid
[6], lunid
[7]);
434 static ssize_t
unique_id_show(struct device
*dev
,
435 struct device_attribute
*attr
, char *buf
)
438 struct scsi_device
*sdev
;
439 struct hpsa_scsi_dev_t
*hdev
;
441 unsigned char sn
[16];
443 sdev
= to_scsi_device(dev
);
444 h
= sdev_to_hba(sdev
);
445 spin_lock_irqsave(&h
->lock
, flags
);
446 hdev
= sdev
->hostdata
;
448 spin_unlock_irqrestore(&h
->lock
, flags
);
451 memcpy(sn
, hdev
->device_id
, sizeof(sn
));
452 spin_unlock_irqrestore(&h
->lock
, flags
);
453 return snprintf(buf
, 16 * 2 + 2,
454 "%02X%02X%02X%02X%02X%02X%02X%02X"
455 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
456 sn
[0], sn
[1], sn
[2], sn
[3],
457 sn
[4], sn
[5], sn
[6], sn
[7],
458 sn
[8], sn
[9], sn
[10], sn
[11],
459 sn
[12], sn
[13], sn
[14], sn
[15]);
462 static int hpsa_find_target_lun(struct ctlr_info
*h
,
463 unsigned char scsi3addr
[], int bus
, int *target
, int *lun
)
465 /* finds an unused bus, target, lun for a new physical device
466 * assumes h->devlock is held
469 DECLARE_BITMAP(lun_taken
, HPSA_MAX_SCSI_DEVS_PER_HBA
);
471 memset(&lun_taken
[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA
>> 3);
473 for (i
= 0; i
< h
->ndevices
; i
++) {
474 if (h
->dev
[i
]->bus
== bus
&& h
->dev
[i
]->target
!= -1)
475 set_bit(h
->dev
[i
]->target
, lun_taken
);
478 for (i
= 0; i
< HPSA_MAX_SCSI_DEVS_PER_HBA
; i
++) {
479 if (!test_bit(i
, lun_taken
)) {
490 /* Add an entry into h->dev[] array. */
491 static int hpsa_scsi_add_entry(struct ctlr_info
*h
, int hostno
,
492 struct hpsa_scsi_dev_t
*device
,
493 struct hpsa_scsi_dev_t
*added
[], int *nadded
)
495 /* assumes h->devlock is held */
498 unsigned char addr1
[8], addr2
[8];
499 struct hpsa_scsi_dev_t
*sd
;
501 if (n
>= HPSA_MAX_SCSI_DEVS_PER_HBA
) {
502 dev_err(&h
->pdev
->dev
, "too many devices, some will be "
507 /* physical devices do not have lun or target assigned until now. */
508 if (device
->lun
!= -1)
509 /* Logical device, lun is already assigned. */
512 /* If this device a non-zero lun of a multi-lun device
513 * byte 4 of the 8-byte LUN addr will contain the logical
514 * unit no, zero otherise.
516 if (device
->scsi3addr
[4] == 0) {
517 /* This is not a non-zero lun of a multi-lun device */
518 if (hpsa_find_target_lun(h
, device
->scsi3addr
,
519 device
->bus
, &device
->target
, &device
->lun
) != 0)
524 /* This is a non-zero lun of a multi-lun device.
525 * Search through our list and find the device which
526 * has the same 8 byte LUN address, excepting byte 4.
527 * Assign the same bus and target for this new LUN.
528 * Use the logical unit number from the firmware.
530 memcpy(addr1
, device
->scsi3addr
, 8);
532 for (i
= 0; i
< n
; i
++) {
534 memcpy(addr2
, sd
->scsi3addr
, 8);
536 /* differ only in byte 4? */
537 if (memcmp(addr1
, addr2
, 8) == 0) {
538 device
->bus
= sd
->bus
;
539 device
->target
= sd
->target
;
540 device
->lun
= device
->scsi3addr
[4];
544 if (device
->lun
== -1) {
545 dev_warn(&h
->pdev
->dev
, "physical device with no LUN=0,"
546 " suspect firmware bug or unsupported hardware "
555 added
[*nadded
] = device
;
558 /* initially, (before registering with scsi layer) we don't
559 * know our hostno and we don't want to print anything first
560 * time anyway (the scsi layer's inquiries will show that info)
562 /* if (hostno != -1) */
563 dev_info(&h
->pdev
->dev
, "%s device c%db%dt%dl%d added.\n",
564 scsi_device_type(device
->devtype
), hostno
,
565 device
->bus
, device
->target
, device
->lun
);
569 /* Replace an entry from h->dev[] array. */
570 static void hpsa_scsi_replace_entry(struct ctlr_info
*h
, int hostno
,
571 int entry
, struct hpsa_scsi_dev_t
*new_entry
,
572 struct hpsa_scsi_dev_t
*added
[], int *nadded
,
573 struct hpsa_scsi_dev_t
*removed
[], int *nremoved
)
575 /* assumes h->devlock is held */
576 BUG_ON(entry
< 0 || entry
>= HPSA_MAX_SCSI_DEVS_PER_HBA
);
577 removed
[*nremoved
] = h
->dev
[entry
];
579 h
->dev
[entry
] = new_entry
;
580 added
[*nadded
] = new_entry
;
582 dev_info(&h
->pdev
->dev
, "%s device c%db%dt%dl%d changed.\n",
583 scsi_device_type(new_entry
->devtype
), hostno
, new_entry
->bus
,
584 new_entry
->target
, new_entry
->lun
);
587 /* Remove an entry from h->dev[] array. */
588 static void hpsa_scsi_remove_entry(struct ctlr_info
*h
, int hostno
, int entry
,
589 struct hpsa_scsi_dev_t
*removed
[], int *nremoved
)
591 /* assumes h->devlock is held */
593 struct hpsa_scsi_dev_t
*sd
;
595 BUG_ON(entry
< 0 || entry
>= HPSA_MAX_SCSI_DEVS_PER_HBA
);
598 removed
[*nremoved
] = h
->dev
[entry
];
601 for (i
= entry
; i
< h
->ndevices
-1; i
++)
602 h
->dev
[i
] = h
->dev
[i
+1];
604 dev_info(&h
->pdev
->dev
, "%s device c%db%dt%dl%d removed.\n",
605 scsi_device_type(sd
->devtype
), hostno
, sd
->bus
, sd
->target
,
609 #define SCSI3ADDR_EQ(a, b) ( \
610 (a)[7] == (b)[7] && \
611 (a)[6] == (b)[6] && \
612 (a)[5] == (b)[5] && \
613 (a)[4] == (b)[4] && \
614 (a)[3] == (b)[3] && \
615 (a)[2] == (b)[2] && \
616 (a)[1] == (b)[1] && \
619 static void fixup_botched_add(struct ctlr_info
*h
,
620 struct hpsa_scsi_dev_t
*added
)
622 /* called when scsi_add_device fails in order to re-adjust
623 * h->dev[] to match the mid layer's view.
628 spin_lock_irqsave(&h
->lock
, flags
);
629 for (i
= 0; i
< h
->ndevices
; i
++) {
630 if (h
->dev
[i
] == added
) {
631 for (j
= i
; j
< h
->ndevices
-1; j
++)
632 h
->dev
[j
] = h
->dev
[j
+1];
637 spin_unlock_irqrestore(&h
->lock
, flags
);
641 static inline int device_is_the_same(struct hpsa_scsi_dev_t
*dev1
,
642 struct hpsa_scsi_dev_t
*dev2
)
644 /* we compare everything except lun and target as these
645 * are not yet assigned. Compare parts likely
648 if (memcmp(dev1
->scsi3addr
, dev2
->scsi3addr
,
649 sizeof(dev1
->scsi3addr
)) != 0)
651 if (memcmp(dev1
->device_id
, dev2
->device_id
,
652 sizeof(dev1
->device_id
)) != 0)
654 if (memcmp(dev1
->model
, dev2
->model
, sizeof(dev1
->model
)) != 0)
656 if (memcmp(dev1
->vendor
, dev2
->vendor
, sizeof(dev1
->vendor
)) != 0)
658 if (dev1
->devtype
!= dev2
->devtype
)
660 if (dev1
->bus
!= dev2
->bus
)
665 /* Find needle in haystack. If exact match found, return DEVICE_SAME,
666 * and return needle location in *index. If scsi3addr matches, but not
667 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle
668 * location in *index. If needle not found, return DEVICE_NOT_FOUND.
670 static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t
*needle
,
671 struct hpsa_scsi_dev_t
*haystack
[], int haystack_size
,
675 #define DEVICE_NOT_FOUND 0
676 #define DEVICE_CHANGED 1
677 #define DEVICE_SAME 2
678 for (i
= 0; i
< haystack_size
; i
++) {
679 if (haystack
[i
] == NULL
) /* previously removed. */
681 if (SCSI3ADDR_EQ(needle
->scsi3addr
, haystack
[i
]->scsi3addr
)) {
683 if (device_is_the_same(needle
, haystack
[i
]))
686 return DEVICE_CHANGED
;
690 return DEVICE_NOT_FOUND
;
693 static void adjust_hpsa_scsi_table(struct ctlr_info
*h
, int hostno
,
694 struct hpsa_scsi_dev_t
*sd
[], int nsds
)
696 /* sd contains scsi3 addresses and devtypes, and inquiry
697 * data. This function takes what's in sd to be the current
698 * reality and updates h->dev[] to reflect that reality.
700 int i
, entry
, device_change
, changes
= 0;
701 struct hpsa_scsi_dev_t
*csd
;
703 struct hpsa_scsi_dev_t
**added
, **removed
;
704 int nadded
, nremoved
;
705 struct Scsi_Host
*sh
= NULL
;
707 added
= kzalloc(sizeof(*added
) * HPSA_MAX_SCSI_DEVS_PER_HBA
,
709 removed
= kzalloc(sizeof(*removed
) * HPSA_MAX_SCSI_DEVS_PER_HBA
,
712 if (!added
|| !removed
) {
713 dev_warn(&h
->pdev
->dev
, "out of memory in "
714 "adjust_hpsa_scsi_table\n");
718 spin_lock_irqsave(&h
->devlock
, flags
);
720 /* find any devices in h->dev[] that are not in
721 * sd[] and remove them from h->dev[], and for any
722 * devices which have changed, remove the old device
723 * info and add the new device info.
728 while (i
< h
->ndevices
) {
730 device_change
= hpsa_scsi_find_entry(csd
, sd
, nsds
, &entry
);
731 if (device_change
== DEVICE_NOT_FOUND
) {
733 hpsa_scsi_remove_entry(h
, hostno
, i
,
735 continue; /* remove ^^^, hence i not incremented */
736 } else if (device_change
== DEVICE_CHANGED
) {
738 hpsa_scsi_replace_entry(h
, hostno
, i
, sd
[entry
],
739 added
, &nadded
, removed
, &nremoved
);
740 /* Set it to NULL to prevent it from being freed
741 * at the bottom of hpsa_update_scsi_devices()
748 /* Now, make sure every device listed in sd[] is also
749 * listed in h->dev[], adding them if they aren't found
752 for (i
= 0; i
< nsds
; i
++) {
753 if (!sd
[i
]) /* if already added above. */
755 device_change
= hpsa_scsi_find_entry(sd
[i
], h
->dev
,
756 h
->ndevices
, &entry
);
757 if (device_change
== DEVICE_NOT_FOUND
) {
759 if (hpsa_scsi_add_entry(h
, hostno
, sd
[i
],
760 added
, &nadded
) != 0)
762 sd
[i
] = NULL
; /* prevent from being freed later. */
763 } else if (device_change
== DEVICE_CHANGED
) {
764 /* should never happen... */
766 dev_warn(&h
->pdev
->dev
,
767 "device unexpectedly changed.\n");
768 /* but if it does happen, we just ignore that device */
771 spin_unlock_irqrestore(&h
->devlock
, flags
);
773 /* Don't notify scsi mid layer of any changes the first time through
774 * (or if there are no changes) scsi_scan_host will do it later the
775 * first time through.
777 if (hostno
== -1 || !changes
)
781 /* Notify scsi mid layer of any removed devices */
782 for (i
= 0; i
< nremoved
; i
++) {
783 struct scsi_device
*sdev
=
784 scsi_device_lookup(sh
, removed
[i
]->bus
,
785 removed
[i
]->target
, removed
[i
]->lun
);
787 scsi_remove_device(sdev
);
788 scsi_device_put(sdev
);
790 /* We don't expect to get here.
791 * future cmds to this device will get selection
792 * timeout as if the device was gone.
794 dev_warn(&h
->pdev
->dev
, "didn't find c%db%dt%dl%d "
795 " for removal.", hostno
, removed
[i
]->bus
,
796 removed
[i
]->target
, removed
[i
]->lun
);
802 /* Notify scsi mid layer of any added devices */
803 for (i
= 0; i
< nadded
; i
++) {
804 if (scsi_add_device(sh
, added
[i
]->bus
,
805 added
[i
]->target
, added
[i
]->lun
) == 0)
807 dev_warn(&h
->pdev
->dev
, "scsi_add_device c%db%dt%dl%d failed, "
808 "device not added.\n", hostno
, added
[i
]->bus
,
809 added
[i
]->target
, added
[i
]->lun
);
810 /* now we have to remove it from h->dev,
811 * since it didn't get added to scsi mid layer
813 fixup_botched_add(h
, added
[i
]);
822 * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t *
823 * Assume's h->devlock is held.
825 static struct hpsa_scsi_dev_t
*lookup_hpsa_scsi_dev(struct ctlr_info
*h
,
826 int bus
, int target
, int lun
)
829 struct hpsa_scsi_dev_t
*sd
;
831 for (i
= 0; i
< h
->ndevices
; i
++) {
833 if (sd
->bus
== bus
&& sd
->target
== target
&& sd
->lun
== lun
)
839 /* link sdev->hostdata to our per-device structure. */
840 static int hpsa_slave_alloc(struct scsi_device
*sdev
)
842 struct hpsa_scsi_dev_t
*sd
;
846 h
= sdev_to_hba(sdev
);
847 spin_lock_irqsave(&h
->devlock
, flags
);
848 sd
= lookup_hpsa_scsi_dev(h
, sdev_channel(sdev
),
849 sdev_id(sdev
), sdev
->lun
);
852 spin_unlock_irqrestore(&h
->devlock
, flags
);
856 static void hpsa_slave_destroy(struct scsi_device
*sdev
)
861 static void hpsa_scsi_setup(struct ctlr_info
*h
)
865 spin_lock_init(&h
->devlock
);
868 static void hpsa_free_sg_chain_blocks(struct ctlr_info
*h
)
874 for (i
= 0; i
< h
->nr_cmds
; i
++) {
875 kfree(h
->cmd_sg_list
[i
]);
876 h
->cmd_sg_list
[i
] = NULL
;
878 kfree(h
->cmd_sg_list
);
879 h
->cmd_sg_list
= NULL
;
882 static int hpsa_allocate_sg_chain_blocks(struct ctlr_info
*h
)
886 if (h
->chainsize
<= 0)
889 h
->cmd_sg_list
= kzalloc(sizeof(*h
->cmd_sg_list
) * h
->nr_cmds
,
893 for (i
= 0; i
< h
->nr_cmds
; i
++) {
894 h
->cmd_sg_list
[i
] = kmalloc(sizeof(*h
->cmd_sg_list
[i
]) *
895 h
->chainsize
, GFP_KERNEL
);
896 if (!h
->cmd_sg_list
[i
])
902 hpsa_free_sg_chain_blocks(h
);
906 static void hpsa_map_sg_chain_block(struct ctlr_info
*h
,
907 struct CommandList
*c
)
909 struct SGDescriptor
*chain_sg
, *chain_block
;
912 chain_sg
= &c
->SG
[h
->max_cmd_sg_entries
- 1];
913 chain_block
= h
->cmd_sg_list
[c
->cmdindex
];
914 chain_sg
->Ext
= HPSA_SG_CHAIN
;
915 chain_sg
->Len
= sizeof(*chain_sg
) *
916 (c
->Header
.SGTotal
- h
->max_cmd_sg_entries
);
917 temp64
= pci_map_single(h
->pdev
, chain_block
, chain_sg
->Len
,
919 chain_sg
->Addr
.lower
= (u32
) (temp64
& 0x0FFFFFFFFULL
);
920 chain_sg
->Addr
.upper
= (u32
) ((temp64
>> 32) & 0x0FFFFFFFFULL
);
923 static void hpsa_unmap_sg_chain_block(struct ctlr_info
*h
,
924 struct CommandList
*c
)
926 struct SGDescriptor
*chain_sg
;
929 if (c
->Header
.SGTotal
<= h
->max_cmd_sg_entries
)
932 chain_sg
= &c
->SG
[h
->max_cmd_sg_entries
- 1];
933 temp64
.val32
.lower
= chain_sg
->Addr
.lower
;
934 temp64
.val32
.upper
= chain_sg
->Addr
.upper
;
935 pci_unmap_single(h
->pdev
, temp64
.val
, chain_sg
->Len
, PCI_DMA_TODEVICE
);
938 static void complete_scsi_command(struct CommandList
*cp
,
939 int timeout
, u32 tag
)
941 struct scsi_cmnd
*cmd
;
943 struct ErrorInfo
*ei
;
945 unsigned char sense_key
;
946 unsigned char asc
; /* additional sense code */
947 unsigned char ascq
; /* additional sense code qualifier */
950 cmd
= (struct scsi_cmnd
*) cp
->scsi_cmd
;
953 scsi_dma_unmap(cmd
); /* undo the DMA mappings */
954 if (cp
->Header
.SGTotal
> h
->max_cmd_sg_entries
)
955 hpsa_unmap_sg_chain_block(h
, cp
);
957 cmd
->result
= (DID_OK
<< 16); /* host byte */
958 cmd
->result
|= (COMMAND_COMPLETE
<< 8); /* msg byte */
959 cmd
->result
|= ei
->ScsiStatus
;
961 /* copy the sense data whether we need to or not. */
962 memcpy(cmd
->sense_buffer
, ei
->SenseInfo
,
963 ei
->SenseLen
> SCSI_SENSE_BUFFERSIZE
?
964 SCSI_SENSE_BUFFERSIZE
:
966 scsi_set_resid(cmd
, ei
->ResidualCnt
);
968 if (ei
->CommandStatus
== 0) {
974 /* an error has occurred */
975 switch (ei
->CommandStatus
) {
977 case CMD_TARGET_STATUS
:
978 if (ei
->ScsiStatus
) {
980 sense_key
= 0xf & ei
->SenseInfo
[2];
981 /* Get additional sense code */
982 asc
= ei
->SenseInfo
[12];
983 /* Get addition sense code qualifier */
984 ascq
= ei
->SenseInfo
[13];
987 if (ei
->ScsiStatus
== SAM_STAT_CHECK_CONDITION
) {
988 if (check_for_unit_attention(h
, cp
)) {
989 cmd
->result
= DID_SOFT_ERROR
<< 16;
992 if (sense_key
== ILLEGAL_REQUEST
) {
994 * SCSI REPORT_LUNS is commonly unsupported on
995 * Smart Array. Suppress noisy complaint.
997 if (cp
->Request
.CDB
[0] == REPORT_LUNS
)
1000 /* If ASC/ASCQ indicate Logical Unit
1001 * Not Supported condition,
1003 if ((asc
== 0x25) && (ascq
== 0x0)) {
1004 dev_warn(&h
->pdev
->dev
, "cp %p "
1005 "has check condition\n", cp
);
1010 if (sense_key
== NOT_READY
) {
1011 /* If Sense is Not Ready, Logical Unit
1012 * Not ready, Manual Intervention
1015 if ((asc
== 0x04) && (ascq
== 0x03)) {
1016 dev_warn(&h
->pdev
->dev
, "cp %p "
1017 "has check condition: unit "
1018 "not ready, manual "
1019 "intervention required\n", cp
);
1023 if (sense_key
== ABORTED_COMMAND
) {
1024 /* Aborted command is retryable */
1025 dev_warn(&h
->pdev
->dev
, "cp %p "
1026 "has check condition: aborted command: "
1027 "ASC: 0x%x, ASCQ: 0x%x\n",
1029 cmd
->result
= DID_SOFT_ERROR
<< 16;
1032 /* Must be some other type of check condition */
1033 dev_warn(&h
->pdev
->dev
, "cp %p has check condition: "
1035 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
1036 "Returning result: 0x%x, "
1037 "cmd=[%02x %02x %02x %02x %02x "
1038 "%02x %02x %02x %02x %02x %02x "
1039 "%02x %02x %02x %02x %02x]\n",
1040 cp
, sense_key
, asc
, ascq
,
1042 cmd
->cmnd
[0], cmd
->cmnd
[1],
1043 cmd
->cmnd
[2], cmd
->cmnd
[3],
1044 cmd
->cmnd
[4], cmd
->cmnd
[5],
1045 cmd
->cmnd
[6], cmd
->cmnd
[7],
1046 cmd
->cmnd
[8], cmd
->cmnd
[9],
1047 cmd
->cmnd
[10], cmd
->cmnd
[11],
1048 cmd
->cmnd
[12], cmd
->cmnd
[13],
1049 cmd
->cmnd
[14], cmd
->cmnd
[15]);
1054 /* Problem was not a check condition
1055 * Pass it up to the upper layers...
1057 if (ei
->ScsiStatus
) {
1058 dev_warn(&h
->pdev
->dev
, "cp %p has status 0x%x "
1059 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
1060 "Returning result: 0x%x\n",
1062 sense_key
, asc
, ascq
,
1064 } else { /* scsi status is zero??? How??? */
1065 dev_warn(&h
->pdev
->dev
, "cp %p SCSI status was 0. "
1066 "Returning no connection.\n", cp
),
1068 /* Ordinarily, this case should never happen,
1069 * but there is a bug in some released firmware
1070 * revisions that allows it to happen if, for
1071 * example, a 4100 backplane loses power and
1072 * the tape drive is in it. We assume that
1073 * it's a fatal error of some kind because we
1074 * can't show that it wasn't. We will make it
1075 * look like selection timeout since that is
1076 * the most common reason for this to occur,
1077 * and it's severe enough.
1080 cmd
->result
= DID_NO_CONNECT
<< 16;
1084 case CMD_DATA_UNDERRUN
: /* let mid layer handle it. */
1086 case CMD_DATA_OVERRUN
:
1087 dev_warn(&h
->pdev
->dev
, "cp %p has"
1088 " completed with data overrun "
1092 /* print_bytes(cp, sizeof(*cp), 1, 0);
1094 /* We get CMD_INVALID if you address a non-existent device
1095 * instead of a selection timeout (no response). You will
1096 * see this if you yank out a drive, then try to access it.
1097 * This is kind of a shame because it means that any other
1098 * CMD_INVALID (e.g. driver bug) will get interpreted as a
1099 * missing target. */
1100 cmd
->result
= DID_NO_CONNECT
<< 16;
1103 case CMD_PROTOCOL_ERR
:
1104 dev_warn(&h
->pdev
->dev
, "cp %p has "
1105 "protocol error \n", cp
);
1107 case CMD_HARDWARE_ERR
:
1108 cmd
->result
= DID_ERROR
<< 16;
1109 dev_warn(&h
->pdev
->dev
, "cp %p had hardware error\n", cp
);
1111 case CMD_CONNECTION_LOST
:
1112 cmd
->result
= DID_ERROR
<< 16;
1113 dev_warn(&h
->pdev
->dev
, "cp %p had connection lost\n", cp
);
1116 cmd
->result
= DID_ABORT
<< 16;
1117 dev_warn(&h
->pdev
->dev
, "cp %p was aborted with status 0x%x\n",
1118 cp
, ei
->ScsiStatus
);
1120 case CMD_ABORT_FAILED
:
1121 cmd
->result
= DID_ERROR
<< 16;
1122 dev_warn(&h
->pdev
->dev
, "cp %p reports abort failed\n", cp
);
1124 case CMD_UNSOLICITED_ABORT
:
1125 cmd
->result
= DID_RESET
<< 16;
1126 dev_warn(&h
->pdev
->dev
, "cp %p aborted do to an unsolicited "
1130 cmd
->result
= DID_TIME_OUT
<< 16;
1131 dev_warn(&h
->pdev
->dev
, "cp %p timedout\n", cp
);
1134 cmd
->result
= DID_ERROR
<< 16;
1135 dev_warn(&h
->pdev
->dev
, "cp %p returned unknown status %x\n",
1136 cp
, ei
->CommandStatus
);
1138 cmd
->scsi_done(cmd
);
1142 static int hpsa_scsi_detect(struct ctlr_info
*h
)
1144 struct Scsi_Host
*sh
;
1147 sh
= scsi_host_alloc(&hpsa_driver_template
, sizeof(h
));
1154 sh
->max_channel
= 3;
1155 sh
->max_cmd_len
= MAX_COMMAND_SIZE
;
1156 sh
->max_lun
= HPSA_MAX_LUN
;
1157 sh
->max_id
= HPSA_MAX_LUN
;
1158 sh
->can_queue
= h
->nr_cmds
;
1159 sh
->cmd_per_lun
= h
->nr_cmds
;
1160 sh
->sg_tablesize
= h
->maxsgentries
;
1162 sh
->hostdata
[0] = (unsigned long) h
;
1163 sh
->irq
= h
->intr
[PERF_MODE_INT
];
1164 sh
->unique_id
= sh
->irq
;
1165 error
= scsi_add_host(sh
, &h
->pdev
->dev
);
1172 dev_err(&h
->pdev
->dev
, "hpsa_scsi_detect: scsi_add_host"
1173 " failed for controller %d\n", h
->ctlr
);
1177 dev_err(&h
->pdev
->dev
, "hpsa_scsi_detect: scsi_host_alloc"
1178 " failed for controller %d\n", h
->ctlr
);
1182 static void hpsa_pci_unmap(struct pci_dev
*pdev
,
1183 struct CommandList
*c
, int sg_used
, int data_direction
)
1186 union u64bit addr64
;
1188 for (i
= 0; i
< sg_used
; i
++) {
1189 addr64
.val32
.lower
= c
->SG
[i
].Addr
.lower
;
1190 addr64
.val32
.upper
= c
->SG
[i
].Addr
.upper
;
1191 pci_unmap_single(pdev
, (dma_addr_t
) addr64
.val
, c
->SG
[i
].Len
,
1196 static void hpsa_map_one(struct pci_dev
*pdev
,
1197 struct CommandList
*cp
,
1204 if (buflen
== 0 || data_direction
== PCI_DMA_NONE
) {
1205 cp
->Header
.SGList
= 0;
1206 cp
->Header
.SGTotal
= 0;
1210 addr64
= (u64
) pci_map_single(pdev
, buf
, buflen
, data_direction
);
1211 cp
->SG
[0].Addr
.lower
=
1212 (u32
) (addr64
& (u64
) 0x00000000FFFFFFFF);
1213 cp
->SG
[0].Addr
.upper
=
1214 (u32
) ((addr64
>> 32) & (u64
) 0x00000000FFFFFFFF);
1215 cp
->SG
[0].Len
= buflen
;
1216 cp
->Header
.SGList
= (u8
) 1; /* no. SGs contig in this cmd */
1217 cp
->Header
.SGTotal
= (u16
) 1; /* total sgs in this cmd list */
1220 static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info
*h
,
1221 struct CommandList
*c
)
1223 DECLARE_COMPLETION_ONSTACK(wait
);
1226 enqueue_cmd_and_start_io(h
, c
);
1227 wait_for_completion(&wait
);
1230 static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info
*h
,
1231 struct CommandList
*c
, int data_direction
)
1233 int retry_count
= 0;
1236 memset(c
->err_info
, 0, sizeof(c
->err_info
));
1237 hpsa_scsi_do_simple_cmd_core(h
, c
);
1239 } while (check_for_unit_attention(h
, c
) && retry_count
<= 3);
1240 hpsa_pci_unmap(h
->pdev
, c
, 1, data_direction
);
1243 static void hpsa_scsi_interpret_error(struct CommandList
*cp
)
1245 struct ErrorInfo
*ei
;
1246 struct device
*d
= &cp
->h
->pdev
->dev
;
1249 switch (ei
->CommandStatus
) {
1250 case CMD_TARGET_STATUS
:
1251 dev_warn(d
, "cmd %p has completed with errors\n", cp
);
1252 dev_warn(d
, "cmd %p has SCSI Status = %x\n", cp
,
1254 if (ei
->ScsiStatus
== 0)
1255 dev_warn(d
, "SCSI status is abnormally zero. "
1256 "(probably indicates selection timeout "
1257 "reported incorrectly due to a known "
1258 "firmware bug, circa July, 2001.)\n");
1260 case CMD_DATA_UNDERRUN
: /* let mid layer handle it. */
1261 dev_info(d
, "UNDERRUN\n");
1263 case CMD_DATA_OVERRUN
:
1264 dev_warn(d
, "cp %p has completed with data overrun\n", cp
);
1267 /* controller unfortunately reports SCSI passthru's
1268 * to non-existent targets as invalid commands.
1270 dev_warn(d
, "cp %p is reported invalid (probably means "
1271 "target device no longer present)\n", cp
);
1272 /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
1276 case CMD_PROTOCOL_ERR
:
1277 dev_warn(d
, "cp %p has protocol error \n", cp
);
1279 case CMD_HARDWARE_ERR
:
1280 /* cmd->result = DID_ERROR << 16; */
1281 dev_warn(d
, "cp %p had hardware error\n", cp
);
1283 case CMD_CONNECTION_LOST
:
1284 dev_warn(d
, "cp %p had connection lost\n", cp
);
1287 dev_warn(d
, "cp %p was aborted\n", cp
);
1289 case CMD_ABORT_FAILED
:
1290 dev_warn(d
, "cp %p reports abort failed\n", cp
);
1292 case CMD_UNSOLICITED_ABORT
:
1293 dev_warn(d
, "cp %p aborted due to an unsolicited abort\n", cp
);
1296 dev_warn(d
, "cp %p timed out\n", cp
);
1299 dev_warn(d
, "cp %p returned unknown status %x\n", cp
,
1304 static int hpsa_scsi_do_inquiry(struct ctlr_info
*h
, unsigned char *scsi3addr
,
1305 unsigned char page
, unsigned char *buf
,
1306 unsigned char bufsize
)
1309 struct CommandList
*c
;
1310 struct ErrorInfo
*ei
;
1312 c
= cmd_special_alloc(h
);
1314 if (c
== NULL
) { /* trouble... */
1315 dev_warn(&h
->pdev
->dev
, "cmd_special_alloc returned NULL!\n");
1319 fill_cmd(c
, HPSA_INQUIRY
, h
, buf
, bufsize
, page
, scsi3addr
, TYPE_CMD
);
1320 hpsa_scsi_do_simple_cmd_with_retry(h
, c
, PCI_DMA_FROMDEVICE
);
1322 if (ei
->CommandStatus
!= 0 && ei
->CommandStatus
!= CMD_DATA_UNDERRUN
) {
1323 hpsa_scsi_interpret_error(c
);
1326 cmd_special_free(h
, c
);
1330 static int hpsa_send_reset(struct ctlr_info
*h
, unsigned char *scsi3addr
)
1333 struct CommandList
*c
;
1334 struct ErrorInfo
*ei
;
1336 c
= cmd_special_alloc(h
);
1338 if (c
== NULL
) { /* trouble... */
1339 dev_warn(&h
->pdev
->dev
, "cmd_special_alloc returned NULL!\n");
1343 fill_cmd(c
, HPSA_DEVICE_RESET_MSG
, h
, NULL
, 0, 0, scsi3addr
, TYPE_MSG
);
1344 hpsa_scsi_do_simple_cmd_core(h
, c
);
1345 /* no unmap needed here because no data xfer. */
1348 if (ei
->CommandStatus
!= 0) {
1349 hpsa_scsi_interpret_error(c
);
1352 cmd_special_free(h
, c
);
1356 static void hpsa_get_raid_level(struct ctlr_info
*h
,
1357 unsigned char *scsi3addr
, unsigned char *raid_level
)
1362 *raid_level
= RAID_UNKNOWN
;
1363 buf
= kzalloc(64, GFP_KERNEL
);
1366 rc
= hpsa_scsi_do_inquiry(h
, scsi3addr
, 0xC1, buf
, 64);
1368 *raid_level
= buf
[8];
1369 if (*raid_level
> RAID_UNKNOWN
)
1370 *raid_level
= RAID_UNKNOWN
;
1375 /* Get the device id from inquiry page 0x83 */
1376 static int hpsa_get_device_id(struct ctlr_info
*h
, unsigned char *scsi3addr
,
1377 unsigned char *device_id
, int buflen
)
1384 buf
= kzalloc(64, GFP_KERNEL
);
1387 rc
= hpsa_scsi_do_inquiry(h
, scsi3addr
, 0x83, buf
, 64);
1389 memcpy(device_id
, &buf
[8], buflen
);
1394 static int hpsa_scsi_do_report_luns(struct ctlr_info
*h
, int logical
,
1395 struct ReportLUNdata
*buf
, int bufsize
,
1396 int extended_response
)
1399 struct CommandList
*c
;
1400 unsigned char scsi3addr
[8];
1401 struct ErrorInfo
*ei
;
1403 c
= cmd_special_alloc(h
);
1404 if (c
== NULL
) { /* trouble... */
1405 dev_err(&h
->pdev
->dev
, "cmd_special_alloc returned NULL!\n");
1408 /* address the controller */
1409 memset(scsi3addr
, 0, sizeof(scsi3addr
));
1410 fill_cmd(c
, logical
? HPSA_REPORT_LOG
: HPSA_REPORT_PHYS
, h
,
1411 buf
, bufsize
, 0, scsi3addr
, TYPE_CMD
);
1412 if (extended_response
)
1413 c
->Request
.CDB
[1] = extended_response
;
1414 hpsa_scsi_do_simple_cmd_with_retry(h
, c
, PCI_DMA_FROMDEVICE
);
1416 if (ei
->CommandStatus
!= 0 &&
1417 ei
->CommandStatus
!= CMD_DATA_UNDERRUN
) {
1418 hpsa_scsi_interpret_error(c
);
1421 cmd_special_free(h
, c
);
1425 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info
*h
,
1426 struct ReportLUNdata
*buf
,
1427 int bufsize
, int extended_response
)
1429 return hpsa_scsi_do_report_luns(h
, 0, buf
, bufsize
, extended_response
);
1432 static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info
*h
,
1433 struct ReportLUNdata
*buf
, int bufsize
)
1435 return hpsa_scsi_do_report_luns(h
, 1, buf
, bufsize
, 0);
1438 static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t
*device
,
1439 int bus
, int target
, int lun
)
1442 device
->target
= target
;
1446 static int hpsa_update_device_info(struct ctlr_info
*h
,
1447 unsigned char scsi3addr
[], struct hpsa_scsi_dev_t
*this_device
)
1449 #define OBDR_TAPE_INQ_SIZE 49
1450 unsigned char *inq_buff
;
1452 inq_buff
= kzalloc(OBDR_TAPE_INQ_SIZE
, GFP_KERNEL
);
1456 /* Do an inquiry to the device to see what it is. */
1457 if (hpsa_scsi_do_inquiry(h
, scsi3addr
, 0, inq_buff
,
1458 (unsigned char) OBDR_TAPE_INQ_SIZE
) != 0) {
1459 /* Inquiry failed (msg printed already) */
1460 dev_err(&h
->pdev
->dev
,
1461 "hpsa_update_device_info: inquiry failed\n");
1465 this_device
->devtype
= (inq_buff
[0] & 0x1f);
1466 memcpy(this_device
->scsi3addr
, scsi3addr
, 8);
1467 memcpy(this_device
->vendor
, &inq_buff
[8],
1468 sizeof(this_device
->vendor
));
1469 memcpy(this_device
->model
, &inq_buff
[16],
1470 sizeof(this_device
->model
));
1471 memset(this_device
->device_id
, 0,
1472 sizeof(this_device
->device_id
));
1473 hpsa_get_device_id(h
, scsi3addr
, this_device
->device_id
,
1474 sizeof(this_device
->device_id
));
1476 if (this_device
->devtype
== TYPE_DISK
&&
1477 is_logical_dev_addr_mode(scsi3addr
))
1478 hpsa_get_raid_level(h
, scsi3addr
, &this_device
->raid_level
);
1480 this_device
->raid_level
= RAID_UNKNOWN
;
1490 static unsigned char *msa2xxx_model
[] = {
1498 static int is_msa2xxx(struct ctlr_info
*h
, struct hpsa_scsi_dev_t
*device
)
1502 for (i
= 0; msa2xxx_model
[i
]; i
++)
1503 if (strncmp(device
->model
, msa2xxx_model
[i
],
1504 strlen(msa2xxx_model
[i
])) == 0)
1509 /* Helper function to assign bus, target, lun mapping of devices.
1510 * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical
1511 * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
1512 * Logical drive target and lun are assigned at this time, but
1513 * physical device lun and target assignment are deferred (assigned
1514 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
1516 static void figure_bus_target_lun(struct ctlr_info
*h
,
1517 u8
*lunaddrbytes
, int *bus
, int *target
, int *lun
,
1518 struct hpsa_scsi_dev_t
*device
)
1522 if (is_logical_dev_addr_mode(lunaddrbytes
)) {
1523 /* logical device */
1524 if (unlikely(is_scsi_rev_5(h
))) {
1525 /* p1210m, logical drives lun assignments
1526 * match SCSI REPORT LUNS data.
1528 lunid
= le32_to_cpu(*((__le32
*) lunaddrbytes
));
1531 *lun
= (lunid
& 0x3fff) + 1;
1534 lunid
= le32_to_cpu(*((__le32
*) lunaddrbytes
));
1535 if (is_msa2xxx(h
, device
)) {
1536 /* msa2xxx way, put logicals on bus 1
1537 * and match target/lun numbers box
1541 *target
= (lunid
>> 16) & 0x3fff;
1542 *lun
= lunid
& 0x00ff;
1544 /* Traditional smart array way. */
1547 *target
= lunid
& 0x3fff;
1551 /* physical device */
1552 if (is_hba_lunid(lunaddrbytes
))
1553 if (unlikely(is_scsi_rev_5(h
))) {
1554 *bus
= 0; /* put p1210m ctlr at 0,0,0 */
1559 *bus
= 3; /* traditional smartarray */
1561 *bus
= 2; /* physical disk */
1563 *lun
= -1; /* we will fill these in later. */
1568 * If there is no lun 0 on a target, linux won't find any devices.
1569 * For the MSA2xxx boxes, we have to manually detect the enclosure
1570 * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
1571 * it for some reason. *tmpdevice is the target we're adding,
1572 * this_device is a pointer into the current element of currentsd[]
1573 * that we're building up in update_scsi_devices(), below.
1574 * lunzerobits is a bitmap that tracks which targets already have a
1576 * Returns 1 if an enclosure was added, 0 if not.
1578 static int add_msa2xxx_enclosure_device(struct ctlr_info
*h
,
1579 struct hpsa_scsi_dev_t
*tmpdevice
,
1580 struct hpsa_scsi_dev_t
*this_device
, u8
*lunaddrbytes
,
1581 int bus
, int target
, int lun
, unsigned long lunzerobits
[],
1582 int *nmsa2xxx_enclosures
)
1584 unsigned char scsi3addr
[8];
1586 if (test_bit(target
, lunzerobits
))
1587 return 0; /* There is already a lun 0 on this target. */
1589 if (!is_logical_dev_addr_mode(lunaddrbytes
))
1590 return 0; /* It's the logical targets that may lack lun 0. */
1592 if (!is_msa2xxx(h
, tmpdevice
))
1593 return 0; /* It's only the MSA2xxx that have this problem. */
1595 if (lun
== 0) /* if lun is 0, then obviously we have a lun 0. */
1598 if (is_hba_lunid(scsi3addr
))
1599 return 0; /* Don't add the RAID controller here. */
1601 if (is_scsi_rev_5(h
))
1602 return 0; /* p1210m doesn't need to do this. */
1604 #define MAX_MSA2XXX_ENCLOSURES 32
1605 if (*nmsa2xxx_enclosures
>= MAX_MSA2XXX_ENCLOSURES
) {
1606 dev_warn(&h
->pdev
->dev
, "Maximum number of MSA2XXX "
1607 "enclosures exceeded. Check your hardware "
1612 memset(scsi3addr
, 0, 8);
1613 scsi3addr
[3] = target
;
1614 if (hpsa_update_device_info(h
, scsi3addr
, this_device
))
1616 (*nmsa2xxx_enclosures
)++;
1617 hpsa_set_bus_target_lun(this_device
, bus
, target
, 0);
1618 set_bit(target
, lunzerobits
);
1623 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
1624 * logdev. The number of luns in physdev and logdev are returned in
1625 * *nphysicals and *nlogicals, respectively.
1626 * Returns 0 on success, -1 otherwise.
1628 static int hpsa_gather_lun_info(struct ctlr_info
*h
,
1630 struct ReportLUNdata
*physdev
, u32
*nphysicals
,
1631 struct ReportLUNdata
*logdev
, u32
*nlogicals
)
1633 if (hpsa_scsi_do_report_phys_luns(h
, physdev
, reportlunsize
, 0)) {
1634 dev_err(&h
->pdev
->dev
, "report physical LUNs failed.\n");
1637 *nphysicals
= be32_to_cpu(*((__be32
*)physdev
->LUNListLength
)) / 8;
1638 if (*nphysicals
> HPSA_MAX_PHYS_LUN
) {
1639 dev_warn(&h
->pdev
->dev
, "maximum physical LUNs (%d) exceeded."
1640 " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN
,
1641 *nphysicals
- HPSA_MAX_PHYS_LUN
);
1642 *nphysicals
= HPSA_MAX_PHYS_LUN
;
1644 if (hpsa_scsi_do_report_log_luns(h
, logdev
, reportlunsize
)) {
1645 dev_err(&h
->pdev
->dev
, "report logical LUNs failed.\n");
1648 *nlogicals
= be32_to_cpu(*((__be32
*) logdev
->LUNListLength
)) / 8;
1649 /* Reject Logicals in excess of our max capability. */
1650 if (*nlogicals
> HPSA_MAX_LUN
) {
1651 dev_warn(&h
->pdev
->dev
,
1652 "maximum logical LUNs (%d) exceeded. "
1653 "%d LUNs ignored.\n", HPSA_MAX_LUN
,
1654 *nlogicals
- HPSA_MAX_LUN
);
1655 *nlogicals
= HPSA_MAX_LUN
;
1657 if (*nlogicals
+ *nphysicals
> HPSA_MAX_PHYS_LUN
) {
1658 dev_warn(&h
->pdev
->dev
,
1659 "maximum logical + physical LUNs (%d) exceeded. "
1660 "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN
,
1661 *nphysicals
+ *nlogicals
- HPSA_MAX_PHYS_LUN
);
1662 *nlogicals
= HPSA_MAX_PHYS_LUN
- *nphysicals
;
1667 u8
*figure_lunaddrbytes(struct ctlr_info
*h
, int raid_ctlr_position
, int i
,
1668 int nphysicals
, int nlogicals
, struct ReportLUNdata
*physdev_list
,
1669 struct ReportLUNdata
*logdev_list
)
1671 /* Helper function, figure out where the LUN ID info is coming from
1672 * given index i, lists of physical and logical devices, where in
1673 * the list the raid controller is supposed to appear (first or last)
1676 int logicals_start
= nphysicals
+ (raid_ctlr_position
== 0);
1677 int last_device
= nphysicals
+ nlogicals
+ (raid_ctlr_position
== 0);
1679 if (i
== raid_ctlr_position
)
1680 return RAID_CTLR_LUNID
;
1682 if (i
< logicals_start
)
1683 return &physdev_list
->LUN
[i
- (raid_ctlr_position
== 0)][0];
1685 if (i
< last_device
)
1686 return &logdev_list
->LUN
[i
- nphysicals
-
1687 (raid_ctlr_position
== 0)][0];
1692 static void hpsa_update_scsi_devices(struct ctlr_info
*h
, int hostno
)
1694 /* the idea here is we could get notified
1695 * that some devices have changed, so we do a report
1696 * physical luns and report logical luns cmd, and adjust
1697 * our list of devices accordingly.
1699 * The scsi3addr's of devices won't change so long as the
1700 * adapter is not reset. That means we can rescan and
1701 * tell which devices we already know about, vs. new
1702 * devices, vs. disappearing devices.
1704 struct ReportLUNdata
*physdev_list
= NULL
;
1705 struct ReportLUNdata
*logdev_list
= NULL
;
1706 unsigned char *inq_buff
= NULL
;
1709 u32 ndev_allocated
= 0;
1710 struct hpsa_scsi_dev_t
**currentsd
, *this_device
, *tmpdevice
;
1712 int reportlunsize
= sizeof(*physdev_list
) + HPSA_MAX_PHYS_LUN
* 8;
1713 int i
, nmsa2xxx_enclosures
, ndevs_to_allocate
;
1714 int bus
, target
, lun
;
1715 int raid_ctlr_position
;
1716 DECLARE_BITMAP(lunzerobits
, HPSA_MAX_TARGETS_PER_CTLR
);
1718 currentsd
= kzalloc(sizeof(*currentsd
) * HPSA_MAX_SCSI_DEVS_PER_HBA
,
1720 physdev_list
= kzalloc(reportlunsize
, GFP_KERNEL
);
1721 logdev_list
= kzalloc(reportlunsize
, GFP_KERNEL
);
1722 inq_buff
= kmalloc(OBDR_TAPE_INQ_SIZE
, GFP_KERNEL
);
1723 tmpdevice
= kzalloc(sizeof(*tmpdevice
), GFP_KERNEL
);
1725 if (!currentsd
|| !physdev_list
|| !logdev_list
||
1726 !inq_buff
|| !tmpdevice
) {
1727 dev_err(&h
->pdev
->dev
, "out of memory\n");
1730 memset(lunzerobits
, 0, sizeof(lunzerobits
));
1732 if (hpsa_gather_lun_info(h
, reportlunsize
, physdev_list
, &nphysicals
,
1733 logdev_list
, &nlogicals
))
1736 /* We might see up to 32 MSA2xxx enclosures, actually 8 of them
1737 * but each of them 4 times through different paths. The plus 1
1738 * is for the RAID controller.
1740 ndevs_to_allocate
= nphysicals
+ nlogicals
+ MAX_MSA2XXX_ENCLOSURES
+ 1;
1742 /* Allocate the per device structures */
1743 for (i
= 0; i
< ndevs_to_allocate
; i
++) {
1744 currentsd
[i
] = kzalloc(sizeof(*currentsd
[i
]), GFP_KERNEL
);
1745 if (!currentsd
[i
]) {
1746 dev_warn(&h
->pdev
->dev
, "out of memory at %s:%d\n",
1747 __FILE__
, __LINE__
);
1753 if (unlikely(is_scsi_rev_5(h
)))
1754 raid_ctlr_position
= 0;
1756 raid_ctlr_position
= nphysicals
+ nlogicals
;
1758 /* adjust our table of devices */
1759 nmsa2xxx_enclosures
= 0;
1760 for (i
= 0; i
< nphysicals
+ nlogicals
+ 1; i
++) {
1763 /* Figure out where the LUN ID info is coming from */
1764 lunaddrbytes
= figure_lunaddrbytes(h
, raid_ctlr_position
,
1765 i
, nphysicals
, nlogicals
, physdev_list
, logdev_list
);
1766 /* skip masked physical devices. */
1767 if (lunaddrbytes
[3] & 0xC0 &&
1768 i
< nphysicals
+ (raid_ctlr_position
== 0))
1771 /* Get device type, vendor, model, device id */
1772 if (hpsa_update_device_info(h
, lunaddrbytes
, tmpdevice
))
1773 continue; /* skip it if we can't talk to it. */
1774 figure_bus_target_lun(h
, lunaddrbytes
, &bus
, &target
, &lun
,
1776 this_device
= currentsd
[ncurrent
];
1779 * For the msa2xxx boxes, we have to insert a LUN 0 which
1780 * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
1781 * is nonetheless an enclosure device there. We have to
1782 * present that otherwise linux won't find anything if
1783 * there is no lun 0.
1785 if (add_msa2xxx_enclosure_device(h
, tmpdevice
, this_device
,
1786 lunaddrbytes
, bus
, target
, lun
, lunzerobits
,
1787 &nmsa2xxx_enclosures
)) {
1789 this_device
= currentsd
[ncurrent
];
1792 *this_device
= *tmpdevice
;
1793 hpsa_set_bus_target_lun(this_device
, bus
, target
, lun
);
1795 switch (this_device
->devtype
) {
1797 /* We don't *really* support actual CD-ROM devices,
1798 * just "One Button Disaster Recovery" tape drive
1799 * which temporarily pretends to be a CD-ROM drive.
1800 * So we check that the device is really an OBDR tape
1801 * device by checking for "$DR-10" in bytes 43-48 of
1805 #define OBDR_TAPE_SIG "$DR-10"
1806 strncpy(obdr_sig
, &inq_buff
[43], 6);
1808 if (strncmp(obdr_sig
, OBDR_TAPE_SIG
, 6) != 0)
1809 /* Not OBDR device, ignore it. */
1820 case TYPE_MEDIUM_CHANGER
:
1824 /* Only present the Smartarray HBA as a RAID controller.
1825 * If it's a RAID controller other than the HBA itself
1826 * (an external RAID controller, MSA500 or similar)
1829 if (!is_hba_lunid(lunaddrbytes
))
1836 if (ncurrent
>= HPSA_MAX_SCSI_DEVS_PER_HBA
)
1839 adjust_hpsa_scsi_table(h
, hostno
, currentsd
, ncurrent
);
1842 for (i
= 0; i
< ndev_allocated
; i
++)
1843 kfree(currentsd
[i
]);
1846 kfree(physdev_list
);
1850 /* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
1851 * dma mapping and fills in the scatter gather entries of the
1854 static int hpsa_scatter_gather(struct ctlr_info
*h
,
1855 struct CommandList
*cp
,
1856 struct scsi_cmnd
*cmd
)
1859 struct scatterlist
*sg
;
1861 int use_sg
, i
, sg_index
, chained
;
1862 struct SGDescriptor
*curr_sg
;
1864 BUG_ON(scsi_sg_count(cmd
) > h
->maxsgentries
);
1866 use_sg
= scsi_dma_map(cmd
);
1871 goto sglist_finished
;
1876 scsi_for_each_sg(cmd
, sg
, use_sg
, i
) {
1877 if (i
== h
->max_cmd_sg_entries
- 1 &&
1878 use_sg
> h
->max_cmd_sg_entries
) {
1880 curr_sg
= h
->cmd_sg_list
[cp
->cmdindex
];
1883 addr64
= (u64
) sg_dma_address(sg
);
1884 len
= sg_dma_len(sg
);
1885 curr_sg
->Addr
.lower
= (u32
) (addr64
& 0x0FFFFFFFFULL
);
1886 curr_sg
->Addr
.upper
= (u32
) ((addr64
>> 32) & 0x0FFFFFFFFULL
);
1888 curr_sg
->Ext
= 0; /* we are not chaining */
1892 if (use_sg
+ chained
> h
->maxSG
)
1893 h
->maxSG
= use_sg
+ chained
;
1896 cp
->Header
.SGList
= h
->max_cmd_sg_entries
;
1897 cp
->Header
.SGTotal
= (u16
) (use_sg
+ 1);
1898 hpsa_map_sg_chain_block(h
, cp
);
1904 cp
->Header
.SGList
= (u8
) use_sg
; /* no. SGs contig in this cmd */
1905 cp
->Header
.SGTotal
= (u16
) use_sg
; /* total sgs in this cmd list */
1910 static int hpsa_scsi_queue_command_lck(struct scsi_cmnd
*cmd
,
1911 void (*done
)(struct scsi_cmnd
*))
1913 struct ctlr_info
*h
;
1914 struct hpsa_scsi_dev_t
*dev
;
1915 unsigned char scsi3addr
[8];
1916 struct CommandList
*c
;
1917 unsigned long flags
;
1919 /* Get the ptr to our adapter structure out of cmd->host. */
1920 h
= sdev_to_hba(cmd
->device
);
1921 dev
= cmd
->device
->hostdata
;
1923 cmd
->result
= DID_NO_CONNECT
<< 16;
1927 memcpy(scsi3addr
, dev
->scsi3addr
, sizeof(scsi3addr
));
1929 /* Need a lock as this is being allocated from the pool */
1930 spin_lock_irqsave(&h
->lock
, flags
);
1932 spin_unlock_irqrestore(&h
->lock
, flags
);
1933 if (c
== NULL
) { /* trouble... */
1934 dev_err(&h
->pdev
->dev
, "cmd_alloc returned NULL!\n");
1935 return SCSI_MLQUEUE_HOST_BUSY
;
1938 /* Fill in the command list header */
1940 cmd
->scsi_done
= done
; /* save this for use by completion code */
1942 /* save c in case we have to abort it */
1943 cmd
->host_scribble
= (unsigned char *) c
;
1945 c
->cmd_type
= CMD_SCSI
;
1947 c
->Header
.ReplyQueue
= 0; /* unused in simple mode */
1948 memcpy(&c
->Header
.LUN
.LunAddrBytes
[0], &scsi3addr
[0], 8);
1949 c
->Header
.Tag
.lower
= (c
->cmdindex
<< DIRECT_LOOKUP_SHIFT
);
1950 c
->Header
.Tag
.lower
|= DIRECT_LOOKUP_BIT
;
1952 /* Fill in the request block... */
1954 c
->Request
.Timeout
= 0;
1955 memset(c
->Request
.CDB
, 0, sizeof(c
->Request
.CDB
));
1956 BUG_ON(cmd
->cmd_len
> sizeof(c
->Request
.CDB
));
1957 c
->Request
.CDBLen
= cmd
->cmd_len
;
1958 memcpy(c
->Request
.CDB
, cmd
->cmnd
, cmd
->cmd_len
);
1959 c
->Request
.Type
.Type
= TYPE_CMD
;
1960 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1961 switch (cmd
->sc_data_direction
) {
1963 c
->Request
.Type
.Direction
= XFER_WRITE
;
1965 case DMA_FROM_DEVICE
:
1966 c
->Request
.Type
.Direction
= XFER_READ
;
1969 c
->Request
.Type
.Direction
= XFER_NONE
;
1971 case DMA_BIDIRECTIONAL
:
1972 /* This can happen if a buggy application does a scsi passthru
1973 * and sets both inlen and outlen to non-zero. ( see
1974 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
1977 c
->Request
.Type
.Direction
= XFER_RSVD
;
1978 /* This is technically wrong, and hpsa controllers should
1979 * reject it with CMD_INVALID, which is the most correct
1980 * response, but non-fibre backends appear to let it
1981 * slide by, and give the same results as if this field
1982 * were set correctly. Either way is acceptable for
1983 * our purposes here.
1989 dev_err(&h
->pdev
->dev
, "unknown data direction: %d\n",
1990 cmd
->sc_data_direction
);
1995 if (hpsa_scatter_gather(h
, c
, cmd
) < 0) { /* Fill SG list */
1997 return SCSI_MLQUEUE_HOST_BUSY
;
1999 enqueue_cmd_and_start_io(h
, c
);
2000 /* the cmd'll come back via intr handler in complete_scsi_command() */
2004 static DEF_SCSI_QCMD(hpsa_scsi_queue_command
)
2006 static void hpsa_scan_start(struct Scsi_Host
*sh
)
2008 struct ctlr_info
*h
= shost_to_hba(sh
);
2009 unsigned long flags
;
2011 /* wait until any scan already in progress is finished. */
2013 spin_lock_irqsave(&h
->scan_lock
, flags
);
2014 if (h
->scan_finished
)
2016 spin_unlock_irqrestore(&h
->scan_lock
, flags
);
2017 wait_event(h
->scan_wait_queue
, h
->scan_finished
);
2018 /* Note: We don't need to worry about a race between this
2019 * thread and driver unload because the midlayer will
2020 * have incremented the reference count, so unload won't
2021 * happen if we're in here.
2024 h
->scan_finished
= 0; /* mark scan as in progress */
2025 spin_unlock_irqrestore(&h
->scan_lock
, flags
);
2027 hpsa_update_scsi_devices(h
, h
->scsi_host
->host_no
);
2029 spin_lock_irqsave(&h
->scan_lock
, flags
);
2030 h
->scan_finished
= 1; /* mark scan as finished. */
2031 wake_up_all(&h
->scan_wait_queue
);
2032 spin_unlock_irqrestore(&h
->scan_lock
, flags
);
2035 static int hpsa_scan_finished(struct Scsi_Host
*sh
,
2036 unsigned long elapsed_time
)
2038 struct ctlr_info
*h
= shost_to_hba(sh
);
2039 unsigned long flags
;
2042 spin_lock_irqsave(&h
->scan_lock
, flags
);
2043 finished
= h
->scan_finished
;
2044 spin_unlock_irqrestore(&h
->scan_lock
, flags
);
2048 static int hpsa_change_queue_depth(struct scsi_device
*sdev
,
2049 int qdepth
, int reason
)
2051 struct ctlr_info
*h
= sdev_to_hba(sdev
);
2053 if (reason
!= SCSI_QDEPTH_DEFAULT
)
2059 if (qdepth
> h
->nr_cmds
)
2060 qdepth
= h
->nr_cmds
;
2061 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
2062 return sdev
->queue_depth
;
2065 static void hpsa_unregister_scsi(struct ctlr_info
*h
)
2067 /* we are being forcibly unloaded, and may not refuse. */
2068 scsi_remove_host(h
->scsi_host
);
2069 scsi_host_put(h
->scsi_host
);
2070 h
->scsi_host
= NULL
;
2073 static int hpsa_register_scsi(struct ctlr_info
*h
)
2077 rc
= hpsa_scsi_detect(h
);
2079 dev_err(&h
->pdev
->dev
, "hpsa_register_scsi: failed"
2080 " hpsa_scsi_detect(), rc is %d\n", rc
);
2084 static int wait_for_device_to_become_ready(struct ctlr_info
*h
,
2085 unsigned char lunaddr
[])
2089 int waittime
= 1; /* seconds */
2090 struct CommandList
*c
;
2092 c
= cmd_special_alloc(h
);
2094 dev_warn(&h
->pdev
->dev
, "out of memory in "
2095 "wait_for_device_to_become_ready.\n");
2099 /* Send test unit ready until device ready, or give up. */
2100 while (count
< HPSA_TUR_RETRY_LIMIT
) {
2102 /* Wait for a bit. do this first, because if we send
2103 * the TUR right away, the reset will just abort it.
2105 msleep(1000 * waittime
);
2108 /* Increase wait time with each try, up to a point. */
2109 if (waittime
< HPSA_MAX_WAIT_INTERVAL_SECS
)
2110 waittime
= waittime
* 2;
2112 /* Send the Test Unit Ready */
2113 fill_cmd(c
, TEST_UNIT_READY
, h
, NULL
, 0, 0, lunaddr
, TYPE_CMD
);
2114 hpsa_scsi_do_simple_cmd_core(h
, c
);
2115 /* no unmap needed here because no data xfer. */
2117 if (c
->err_info
->CommandStatus
== CMD_SUCCESS
)
2120 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
&&
2121 c
->err_info
->ScsiStatus
== SAM_STAT_CHECK_CONDITION
&&
2122 (c
->err_info
->SenseInfo
[2] == NO_SENSE
||
2123 c
->err_info
->SenseInfo
[2] == UNIT_ATTENTION
))
2126 dev_warn(&h
->pdev
->dev
, "waiting %d secs "
2127 "for device to become ready.\n", waittime
);
2128 rc
= 1; /* device not ready. */
2132 dev_warn(&h
->pdev
->dev
, "giving up on device.\n");
2134 dev_warn(&h
->pdev
->dev
, "device is ready.\n");
2136 cmd_special_free(h
, c
);
2140 /* Need at least one of these error handlers to keep ../scsi/hosts.c from
2141 * complaining. Doing a host- or bus-reset can't do anything good here.
2143 static int hpsa_eh_device_reset_handler(struct scsi_cmnd
*scsicmd
)
2146 struct ctlr_info
*h
;
2147 struct hpsa_scsi_dev_t
*dev
;
2149 /* find the controller to which the command to be aborted was sent */
2150 h
= sdev_to_hba(scsicmd
->device
);
2151 if (h
== NULL
) /* paranoia */
2153 dev
= scsicmd
->device
->hostdata
;
2155 dev_err(&h
->pdev
->dev
, "hpsa_eh_device_reset_handler: "
2156 "device lookup failed.\n");
2159 dev_warn(&h
->pdev
->dev
, "resetting device %d:%d:%d:%d\n",
2160 h
->scsi_host
->host_no
, dev
->bus
, dev
->target
, dev
->lun
);
2161 /* send a reset to the SCSI LUN which the command was sent to */
2162 rc
= hpsa_send_reset(h
, dev
->scsi3addr
);
2163 if (rc
== 0 && wait_for_device_to_become_ready(h
, dev
->scsi3addr
) == 0)
2166 dev_warn(&h
->pdev
->dev
, "resetting device failed.\n");
2171 * For operations that cannot sleep, a command block is allocated at init,
2172 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
2173 * which ones are free or in use. Lock must be held when calling this.
2174 * cmd_free() is the complement.
2176 static struct CommandList
*cmd_alloc(struct ctlr_info
*h
)
2178 struct CommandList
*c
;
2180 union u64bit temp64
;
2181 dma_addr_t cmd_dma_handle
, err_dma_handle
;
2184 i
= find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
);
2185 if (i
== h
->nr_cmds
)
2187 } while (test_and_set_bit
2188 (i
& (BITS_PER_LONG
- 1),
2189 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
)) != 0);
2190 c
= h
->cmd_pool
+ i
;
2191 memset(c
, 0, sizeof(*c
));
2192 cmd_dma_handle
= h
->cmd_pool_dhandle
2194 c
->err_info
= h
->errinfo_pool
+ i
;
2195 memset(c
->err_info
, 0, sizeof(*c
->err_info
));
2196 err_dma_handle
= h
->errinfo_pool_dhandle
2197 + i
* sizeof(*c
->err_info
);
2202 INIT_HLIST_NODE(&c
->list
);
2203 c
->busaddr
= (u32
) cmd_dma_handle
;
2204 temp64
.val
= (u64
) err_dma_handle
;
2205 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
2206 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
2207 c
->ErrDesc
.Len
= sizeof(*c
->err_info
);
2213 /* For operations that can wait for kmalloc to possibly sleep,
2214 * this routine can be called. Lock need not be held to call
2215 * cmd_special_alloc. cmd_special_free() is the complement.
2217 static struct CommandList
*cmd_special_alloc(struct ctlr_info
*h
)
2219 struct CommandList
*c
;
2220 union u64bit temp64
;
2221 dma_addr_t cmd_dma_handle
, err_dma_handle
;
2223 c
= pci_alloc_consistent(h
->pdev
, sizeof(*c
), &cmd_dma_handle
);
2226 memset(c
, 0, sizeof(*c
));
2230 c
->err_info
= pci_alloc_consistent(h
->pdev
, sizeof(*c
->err_info
),
2233 if (c
->err_info
== NULL
) {
2234 pci_free_consistent(h
->pdev
,
2235 sizeof(*c
), c
, cmd_dma_handle
);
2238 memset(c
->err_info
, 0, sizeof(*c
->err_info
));
2240 INIT_HLIST_NODE(&c
->list
);
2241 c
->busaddr
= (u32
) cmd_dma_handle
;
2242 temp64
.val
= (u64
) err_dma_handle
;
2243 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
2244 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
2245 c
->ErrDesc
.Len
= sizeof(*c
->err_info
);
2251 static void cmd_free(struct ctlr_info
*h
, struct CommandList
*c
)
2255 i
= c
- h
->cmd_pool
;
2256 clear_bit(i
& (BITS_PER_LONG
- 1),
2257 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
));
2261 static void cmd_special_free(struct ctlr_info
*h
, struct CommandList
*c
)
2263 union u64bit temp64
;
2265 temp64
.val32
.lower
= c
->ErrDesc
.Addr
.lower
;
2266 temp64
.val32
.upper
= c
->ErrDesc
.Addr
.upper
;
2267 pci_free_consistent(h
->pdev
, sizeof(*c
->err_info
),
2268 c
->err_info
, (dma_addr_t
) temp64
.val
);
2269 pci_free_consistent(h
->pdev
, sizeof(*c
),
2270 c
, (dma_addr_t
) c
->busaddr
);
2273 #ifdef CONFIG_COMPAT
2275 static int hpsa_ioctl32_passthru(struct scsi_device
*dev
, int cmd
, void *arg
)
2277 IOCTL32_Command_struct __user
*arg32
=
2278 (IOCTL32_Command_struct __user
*) arg
;
2279 IOCTL_Command_struct arg64
;
2280 IOCTL_Command_struct __user
*p
= compat_alloc_user_space(sizeof(arg64
));
2285 err
|= copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
2286 sizeof(arg64
.LUN_info
));
2287 err
|= copy_from_user(&arg64
.Request
, &arg32
->Request
,
2288 sizeof(arg64
.Request
));
2289 err
|= copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
2290 sizeof(arg64
.error_info
));
2291 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
2292 err
|= get_user(cp
, &arg32
->buf
);
2293 arg64
.buf
= compat_ptr(cp
);
2294 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
2299 err
= hpsa_ioctl(dev
, CCISS_PASSTHRU
, (void *)p
);
2302 err
|= copy_in_user(&arg32
->error_info
, &p
->error_info
,
2303 sizeof(arg32
->error_info
));
2309 static int hpsa_ioctl32_big_passthru(struct scsi_device
*dev
,
2312 BIG_IOCTL32_Command_struct __user
*arg32
=
2313 (BIG_IOCTL32_Command_struct __user
*) arg
;
2314 BIG_IOCTL_Command_struct arg64
;
2315 BIG_IOCTL_Command_struct __user
*p
=
2316 compat_alloc_user_space(sizeof(arg64
));
2321 err
|= copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
2322 sizeof(arg64
.LUN_info
));
2323 err
|= copy_from_user(&arg64
.Request
, &arg32
->Request
,
2324 sizeof(arg64
.Request
));
2325 err
|= copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
2326 sizeof(arg64
.error_info
));
2327 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
2328 err
|= get_user(arg64
.malloc_size
, &arg32
->malloc_size
);
2329 err
|= get_user(cp
, &arg32
->buf
);
2330 arg64
.buf
= compat_ptr(cp
);
2331 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
2336 err
= hpsa_ioctl(dev
, CCISS_BIG_PASSTHRU
, (void *)p
);
2339 err
|= copy_in_user(&arg32
->error_info
, &p
->error_info
,
2340 sizeof(arg32
->error_info
));
2346 static int hpsa_compat_ioctl(struct scsi_device
*dev
, int cmd
, void *arg
)
2349 case CCISS_GETPCIINFO
:
2350 case CCISS_GETINTINFO
:
2351 case CCISS_SETINTINFO
:
2352 case CCISS_GETNODENAME
:
2353 case CCISS_SETNODENAME
:
2354 case CCISS_GETHEARTBEAT
:
2355 case CCISS_GETBUSTYPES
:
2356 case CCISS_GETFIRMVER
:
2357 case CCISS_GETDRIVVER
:
2358 case CCISS_REVALIDVOLS
:
2359 case CCISS_DEREGDISK
:
2360 case CCISS_REGNEWDISK
:
2362 case CCISS_RESCANDISK
:
2363 case CCISS_GETLUNINFO
:
2364 return hpsa_ioctl(dev
, cmd
, arg
);
2366 case CCISS_PASSTHRU32
:
2367 return hpsa_ioctl32_passthru(dev
, cmd
, arg
);
2368 case CCISS_BIG_PASSTHRU32
:
2369 return hpsa_ioctl32_big_passthru(dev
, cmd
, arg
);
2372 return -ENOIOCTLCMD
;
2377 static int hpsa_getpciinfo_ioctl(struct ctlr_info
*h
, void __user
*argp
)
2379 struct hpsa_pci_info pciinfo
;
2383 pciinfo
.domain
= pci_domain_nr(h
->pdev
->bus
);
2384 pciinfo
.bus
= h
->pdev
->bus
->number
;
2385 pciinfo
.dev_fn
= h
->pdev
->devfn
;
2386 pciinfo
.board_id
= h
->board_id
;
2387 if (copy_to_user(argp
, &pciinfo
, sizeof(pciinfo
)))
2392 static int hpsa_getdrivver_ioctl(struct ctlr_info
*h
, void __user
*argp
)
2394 DriverVer_type DriverVer
;
2395 unsigned char vmaj
, vmin
, vsubmin
;
2398 rc
= sscanf(HPSA_DRIVER_VERSION
, "%hhu.%hhu.%hhu",
2399 &vmaj
, &vmin
, &vsubmin
);
2401 dev_info(&h
->pdev
->dev
, "driver version string '%s' "
2402 "unrecognized.", HPSA_DRIVER_VERSION
);
2407 DriverVer
= (vmaj
<< 16) | (vmin
<< 8) | vsubmin
;
2410 if (copy_to_user(argp
, &DriverVer
, sizeof(DriverVer_type
)))
2415 static int hpsa_passthru_ioctl(struct ctlr_info
*h
, void __user
*argp
)
2417 IOCTL_Command_struct iocommand
;
2418 struct CommandList
*c
;
2420 union u64bit temp64
;
2424 if (!capable(CAP_SYS_RAWIO
))
2426 if (copy_from_user(&iocommand
, argp
, sizeof(iocommand
)))
2428 if ((iocommand
.buf_size
< 1) &&
2429 (iocommand
.Request
.Type
.Direction
!= XFER_NONE
)) {
2432 if (iocommand
.buf_size
> 0) {
2433 buff
= kmalloc(iocommand
.buf_size
, GFP_KERNEL
);
2436 if (iocommand
.Request
.Type
.Direction
== XFER_WRITE
) {
2437 /* Copy the data into the buffer we created */
2438 if (copy_from_user(buff
, iocommand
.buf
,
2439 iocommand
.buf_size
)) {
2444 memset(buff
, 0, iocommand
.buf_size
);
2447 c
= cmd_special_alloc(h
);
2452 /* Fill in the command type */
2453 c
->cmd_type
= CMD_IOCTL_PEND
;
2454 /* Fill in Command Header */
2455 c
->Header
.ReplyQueue
= 0; /* unused in simple mode */
2456 if (iocommand
.buf_size
> 0) { /* buffer to fill */
2457 c
->Header
.SGList
= 1;
2458 c
->Header
.SGTotal
= 1;
2459 } else { /* no buffers to fill */
2460 c
->Header
.SGList
= 0;
2461 c
->Header
.SGTotal
= 0;
2463 memcpy(&c
->Header
.LUN
, &iocommand
.LUN_info
, sizeof(c
->Header
.LUN
));
2464 /* use the kernel address the cmd block for tag */
2465 c
->Header
.Tag
.lower
= c
->busaddr
;
2467 /* Fill in Request block */
2468 memcpy(&c
->Request
, &iocommand
.Request
,
2469 sizeof(c
->Request
));
2471 /* Fill in the scatter gather information */
2472 if (iocommand
.buf_size
> 0) {
2473 temp64
.val
= pci_map_single(h
->pdev
, buff
,
2474 iocommand
.buf_size
, PCI_DMA_BIDIRECTIONAL
);
2475 c
->SG
[0].Addr
.lower
= temp64
.val32
.lower
;
2476 c
->SG
[0].Addr
.upper
= temp64
.val32
.upper
;
2477 c
->SG
[0].Len
= iocommand
.buf_size
;
2478 c
->SG
[0].Ext
= 0; /* we are not chaining*/
2480 hpsa_scsi_do_simple_cmd_core(h
, c
);
2481 hpsa_pci_unmap(h
->pdev
, c
, 1, PCI_DMA_BIDIRECTIONAL
);
2482 check_ioctl_unit_attention(h
, c
);
2484 /* Copy the error information out */
2485 memcpy(&iocommand
.error_info
, c
->err_info
,
2486 sizeof(iocommand
.error_info
));
2487 if (copy_to_user(argp
, &iocommand
, sizeof(iocommand
))) {
2489 cmd_special_free(h
, c
);
2492 if (iocommand
.Request
.Type
.Direction
== XFER_READ
&&
2493 iocommand
.buf_size
> 0) {
2494 /* Copy the data out of the buffer we created */
2495 if (copy_to_user(iocommand
.buf
, buff
, iocommand
.buf_size
)) {
2497 cmd_special_free(h
, c
);
2502 cmd_special_free(h
, c
);
2506 static int hpsa_big_passthru_ioctl(struct ctlr_info
*h
, void __user
*argp
)
2508 BIG_IOCTL_Command_struct
*ioc
;
2509 struct CommandList
*c
;
2510 unsigned char **buff
= NULL
;
2511 int *buff_size
= NULL
;
2512 union u64bit temp64
;
2518 BYTE __user
*data_ptr
;
2522 if (!capable(CAP_SYS_RAWIO
))
2524 ioc
= (BIG_IOCTL_Command_struct
*)
2525 kmalloc(sizeof(*ioc
), GFP_KERNEL
);
2530 if (copy_from_user(ioc
, argp
, sizeof(*ioc
))) {
2534 if ((ioc
->buf_size
< 1) &&
2535 (ioc
->Request
.Type
.Direction
!= XFER_NONE
)) {
2539 /* Check kmalloc limits using all SGs */
2540 if (ioc
->malloc_size
> MAX_KMALLOC_SIZE
) {
2544 if (ioc
->buf_size
> ioc
->malloc_size
* MAXSGENTRIES
) {
2548 buff
= kzalloc(MAXSGENTRIES
* sizeof(char *), GFP_KERNEL
);
2553 buff_size
= kmalloc(MAXSGENTRIES
* sizeof(int), GFP_KERNEL
);
2558 left
= ioc
->buf_size
;
2559 data_ptr
= ioc
->buf
;
2561 sz
= (left
> ioc
->malloc_size
) ? ioc
->malloc_size
: left
;
2562 buff_size
[sg_used
] = sz
;
2563 buff
[sg_used
] = kmalloc(sz
, GFP_KERNEL
);
2564 if (buff
[sg_used
] == NULL
) {
2568 if (ioc
->Request
.Type
.Direction
== XFER_WRITE
) {
2569 if (copy_from_user(buff
[sg_used
], data_ptr
, sz
)) {
2574 memset(buff
[sg_used
], 0, sz
);
2579 c
= cmd_special_alloc(h
);
2584 c
->cmd_type
= CMD_IOCTL_PEND
;
2585 c
->Header
.ReplyQueue
= 0;
2586 c
->Header
.SGList
= c
->Header
.SGTotal
= sg_used
;
2587 memcpy(&c
->Header
.LUN
, &ioc
->LUN_info
, sizeof(c
->Header
.LUN
));
2588 c
->Header
.Tag
.lower
= c
->busaddr
;
2589 memcpy(&c
->Request
, &ioc
->Request
, sizeof(c
->Request
));
2590 if (ioc
->buf_size
> 0) {
2592 for (i
= 0; i
< sg_used
; i
++) {
2593 temp64
.val
= pci_map_single(h
->pdev
, buff
[i
],
2594 buff_size
[i
], PCI_DMA_BIDIRECTIONAL
);
2595 c
->SG
[i
].Addr
.lower
= temp64
.val32
.lower
;
2596 c
->SG
[i
].Addr
.upper
= temp64
.val32
.upper
;
2597 c
->SG
[i
].Len
= buff_size
[i
];
2598 /* we are not chaining */
2602 hpsa_scsi_do_simple_cmd_core(h
, c
);
2604 hpsa_pci_unmap(h
->pdev
, c
, sg_used
, PCI_DMA_BIDIRECTIONAL
);
2605 check_ioctl_unit_attention(h
, c
);
2606 /* Copy the error information out */
2607 memcpy(&ioc
->error_info
, c
->err_info
, sizeof(ioc
->error_info
));
2608 if (copy_to_user(argp
, ioc
, sizeof(*ioc
))) {
2609 cmd_special_free(h
, c
);
2613 if (ioc
->Request
.Type
.Direction
== XFER_READ
&& ioc
->buf_size
> 0) {
2614 /* Copy the data out of the buffer we created */
2615 BYTE __user
*ptr
= ioc
->buf
;
2616 for (i
= 0; i
< sg_used
; i
++) {
2617 if (copy_to_user(ptr
, buff
[i
], buff_size
[i
])) {
2618 cmd_special_free(h
, c
);
2622 ptr
+= buff_size
[i
];
2625 cmd_special_free(h
, c
);
2629 for (i
= 0; i
< sg_used
; i
++)
2638 static void check_ioctl_unit_attention(struct ctlr_info
*h
,
2639 struct CommandList
*c
)
2641 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
&&
2642 c
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
)
2643 (void) check_for_unit_attention(h
, c
);
2648 static int hpsa_ioctl(struct scsi_device
*dev
, int cmd
, void *arg
)
2650 struct ctlr_info
*h
;
2651 void __user
*argp
= (void __user
*)arg
;
2653 h
= sdev_to_hba(dev
);
2656 case CCISS_DEREGDISK
:
2657 case CCISS_REGNEWDISK
:
2659 hpsa_scan_start(h
->scsi_host
);
2661 case CCISS_GETPCIINFO
:
2662 return hpsa_getpciinfo_ioctl(h
, argp
);
2663 case CCISS_GETDRIVVER
:
2664 return hpsa_getdrivver_ioctl(h
, argp
);
2665 case CCISS_PASSTHRU
:
2666 return hpsa_passthru_ioctl(h
, argp
);
2667 case CCISS_BIG_PASSTHRU
:
2668 return hpsa_big_passthru_ioctl(h
, argp
);
2674 static void fill_cmd(struct CommandList
*c
, u8 cmd
, struct ctlr_info
*h
,
2675 void *buff
, size_t size
, u8 page_code
, unsigned char *scsi3addr
,
2678 int pci_dir
= XFER_NONE
;
2680 c
->cmd_type
= CMD_IOCTL_PEND
;
2681 c
->Header
.ReplyQueue
= 0;
2682 if (buff
!= NULL
&& size
> 0) {
2683 c
->Header
.SGList
= 1;
2684 c
->Header
.SGTotal
= 1;
2686 c
->Header
.SGList
= 0;
2687 c
->Header
.SGTotal
= 0;
2689 c
->Header
.Tag
.lower
= c
->busaddr
;
2690 memcpy(c
->Header
.LUN
.LunAddrBytes
, scsi3addr
, 8);
2692 c
->Request
.Type
.Type
= cmd_type
;
2693 if (cmd_type
== TYPE_CMD
) {
2696 /* are we trying to read a vital product page */
2697 if (page_code
!= 0) {
2698 c
->Request
.CDB
[1] = 0x01;
2699 c
->Request
.CDB
[2] = page_code
;
2701 c
->Request
.CDBLen
= 6;
2702 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2703 c
->Request
.Type
.Direction
= XFER_READ
;
2704 c
->Request
.Timeout
= 0;
2705 c
->Request
.CDB
[0] = HPSA_INQUIRY
;
2706 c
->Request
.CDB
[4] = size
& 0xFF;
2708 case HPSA_REPORT_LOG
:
2709 case HPSA_REPORT_PHYS
:
2710 /* Talking to controller so It's a physical command
2711 mode = 00 target = 0. Nothing to write.
2713 c
->Request
.CDBLen
= 12;
2714 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2715 c
->Request
.Type
.Direction
= XFER_READ
;
2716 c
->Request
.Timeout
= 0;
2717 c
->Request
.CDB
[0] = cmd
;
2718 c
->Request
.CDB
[6] = (size
>> 24) & 0xFF; /* MSB */
2719 c
->Request
.CDB
[7] = (size
>> 16) & 0xFF;
2720 c
->Request
.CDB
[8] = (size
>> 8) & 0xFF;
2721 c
->Request
.CDB
[9] = size
& 0xFF;
2723 case HPSA_CACHE_FLUSH
:
2724 c
->Request
.CDBLen
= 12;
2725 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2726 c
->Request
.Type
.Direction
= XFER_WRITE
;
2727 c
->Request
.Timeout
= 0;
2728 c
->Request
.CDB
[0] = BMIC_WRITE
;
2729 c
->Request
.CDB
[6] = BMIC_CACHE_FLUSH
;
2731 case TEST_UNIT_READY
:
2732 c
->Request
.CDBLen
= 6;
2733 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2734 c
->Request
.Type
.Direction
= XFER_NONE
;
2735 c
->Request
.Timeout
= 0;
2738 dev_warn(&h
->pdev
->dev
, "unknown command 0x%c\n", cmd
);
2742 } else if (cmd_type
== TYPE_MSG
) {
2745 case HPSA_DEVICE_RESET_MSG
:
2746 c
->Request
.CDBLen
= 16;
2747 c
->Request
.Type
.Type
= 1; /* It is a MSG not a CMD */
2748 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2749 c
->Request
.Type
.Direction
= XFER_NONE
;
2750 c
->Request
.Timeout
= 0; /* Don't time out */
2751 c
->Request
.CDB
[0] = 0x01; /* RESET_MSG is 0x01 */
2752 c
->Request
.CDB
[1] = 0x03; /* Reset target above */
2753 /* If bytes 4-7 are zero, it means reset the */
2755 c
->Request
.CDB
[4] = 0x00;
2756 c
->Request
.CDB
[5] = 0x00;
2757 c
->Request
.CDB
[6] = 0x00;
2758 c
->Request
.CDB
[7] = 0x00;
2762 dev_warn(&h
->pdev
->dev
, "unknown message type %d\n",
2767 dev_warn(&h
->pdev
->dev
, "unknown command type %d\n", cmd_type
);
2771 switch (c
->Request
.Type
.Direction
) {
2773 pci_dir
= PCI_DMA_FROMDEVICE
;
2776 pci_dir
= PCI_DMA_TODEVICE
;
2779 pci_dir
= PCI_DMA_NONE
;
2782 pci_dir
= PCI_DMA_BIDIRECTIONAL
;
2785 hpsa_map_one(h
->pdev
, c
, buff
, size
, pci_dir
);
2791 * Map (physical) PCI mem into (virtual) kernel space
2793 static void __iomem
*remap_pci_mem(ulong base
, ulong size
)
2795 ulong page_base
= ((ulong
) base
) & PAGE_MASK
;
2796 ulong page_offs
= ((ulong
) base
) - page_base
;
2797 void __iomem
*page_remapped
= ioremap(page_base
, page_offs
+ size
);
2799 return page_remapped
? (page_remapped
+ page_offs
) : NULL
;
2802 /* Takes cmds off the submission queue and sends them to the hardware,
2803 * then puts them on the queue of cmds waiting for completion.
2805 static void start_io(struct ctlr_info
*h
)
2807 struct CommandList
*c
;
2809 while (!hlist_empty(&h
->reqQ
)) {
2810 c
= hlist_entry(h
->reqQ
.first
, struct CommandList
, list
);
2811 /* can't do anything if fifo is full */
2812 if ((h
->access
.fifo_full(h
))) {
2813 dev_warn(&h
->pdev
->dev
, "fifo full\n");
2817 /* Get the first entry from the Request Q */
2821 /* Tell the controller execute command */
2822 h
->access
.submit_command(h
, c
);
2824 /* Put job onto the completed Q */
2829 static inline unsigned long get_next_completion(struct ctlr_info
*h
)
2831 return h
->access
.command_completed(h
);
2834 static inline bool interrupt_pending(struct ctlr_info
*h
)
2836 return h
->access
.intr_pending(h
);
2839 static inline long interrupt_not_for_us(struct ctlr_info
*h
)
2841 return (h
->access
.intr_pending(h
) == 0) ||
2842 (h
->interrupts_enabled
== 0);
2845 static inline int bad_tag(struct ctlr_info
*h
, u32 tag_index
,
2848 if (unlikely(tag_index
>= h
->nr_cmds
)) {
2849 dev_warn(&h
->pdev
->dev
, "bad tag 0x%08x ignored.\n", raw_tag
);
2855 static inline void finish_cmd(struct CommandList
*c
, u32 raw_tag
)
2858 if (likely(c
->cmd_type
== CMD_SCSI
))
2859 complete_scsi_command(c
, 0, raw_tag
);
2860 else if (c
->cmd_type
== CMD_IOCTL_PEND
)
2861 complete(c
->waiting
);
2864 static inline u32
hpsa_tag_contains_index(u32 tag
)
2866 #define DIRECT_LOOKUP_BIT 0x10
2867 return tag
& DIRECT_LOOKUP_BIT
;
2870 static inline u32
hpsa_tag_to_index(u32 tag
)
2872 #define DIRECT_LOOKUP_SHIFT 5
2873 return tag
>> DIRECT_LOOKUP_SHIFT
;
2876 static inline u32
hpsa_tag_discard_error_bits(u32 tag
)
2878 #define HPSA_ERROR_BITS 0x03
2879 return tag
& ~HPSA_ERROR_BITS
;
2882 /* process completion of an indexed ("direct lookup") command */
2883 static inline u32
process_indexed_cmd(struct ctlr_info
*h
,
2887 struct CommandList
*c
;
2889 tag_index
= hpsa_tag_to_index(raw_tag
);
2890 if (bad_tag(h
, tag_index
, raw_tag
))
2891 return next_command(h
);
2892 c
= h
->cmd_pool
+ tag_index
;
2893 finish_cmd(c
, raw_tag
);
2894 return next_command(h
);
2897 /* process completion of a non-indexed command */
2898 static inline u32
process_nonindexed_cmd(struct ctlr_info
*h
,
2902 struct CommandList
*c
= NULL
;
2903 struct hlist_node
*tmp
;
2905 tag
= hpsa_tag_discard_error_bits(raw_tag
);
2906 hlist_for_each_entry(c
, tmp
, &h
->cmpQ
, list
) {
2907 if ((c
->busaddr
& 0xFFFFFFE0) == (tag
& 0xFFFFFFE0)) {
2908 finish_cmd(c
, raw_tag
);
2909 return next_command(h
);
2912 bad_tag(h
, h
->nr_cmds
+ 1, raw_tag
);
2913 return next_command(h
);
2916 static irqreturn_t
do_hpsa_intr_intx(int irq
, void *dev_id
)
2918 struct ctlr_info
*h
= dev_id
;
2919 unsigned long flags
;
2922 if (interrupt_not_for_us(h
))
2924 spin_lock_irqsave(&h
->lock
, flags
);
2925 while (interrupt_pending(h
)) {
2926 raw_tag
= get_next_completion(h
);
2927 while (raw_tag
!= FIFO_EMPTY
) {
2928 if (hpsa_tag_contains_index(raw_tag
))
2929 raw_tag
= process_indexed_cmd(h
, raw_tag
);
2931 raw_tag
= process_nonindexed_cmd(h
, raw_tag
);
2934 spin_unlock_irqrestore(&h
->lock
, flags
);
2938 static irqreturn_t
do_hpsa_intr_msi(int irq
, void *dev_id
)
2940 struct ctlr_info
*h
= dev_id
;
2941 unsigned long flags
;
2944 spin_lock_irqsave(&h
->lock
, flags
);
2945 raw_tag
= get_next_completion(h
);
2946 while (raw_tag
!= FIFO_EMPTY
) {
2947 if (hpsa_tag_contains_index(raw_tag
))
2948 raw_tag
= process_indexed_cmd(h
, raw_tag
);
2950 raw_tag
= process_nonindexed_cmd(h
, raw_tag
);
2952 spin_unlock_irqrestore(&h
->lock
, flags
);
2956 /* Send a message CDB to the firmware. */
2957 static __devinit
int hpsa_message(struct pci_dev
*pdev
, unsigned char opcode
,
2961 struct CommandListHeader CommandHeader
;
2962 struct RequestBlock Request
;
2963 struct ErrDescriptor ErrorDescriptor
;
2965 struct Command
*cmd
;
2966 static const size_t cmd_sz
= sizeof(*cmd
) +
2967 sizeof(cmd
->ErrorDescriptor
);
2969 uint32_t paddr32
, tag
;
2970 void __iomem
*vaddr
;
2973 vaddr
= pci_ioremap_bar(pdev
, 0);
2977 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
2978 * CCISS commands, so they must be allocated from the lower 4GiB of
2981 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
2987 cmd
= pci_alloc_consistent(pdev
, cmd_sz
, &paddr64
);
2993 /* This must fit, because of the 32-bit consistent DMA mask. Also,
2994 * although there's no guarantee, we assume that the address is at
2995 * least 4-byte aligned (most likely, it's page-aligned).
2999 cmd
->CommandHeader
.ReplyQueue
= 0;
3000 cmd
->CommandHeader
.SGList
= 0;
3001 cmd
->CommandHeader
.SGTotal
= 0;
3002 cmd
->CommandHeader
.Tag
.lower
= paddr32
;
3003 cmd
->CommandHeader
.Tag
.upper
= 0;
3004 memset(&cmd
->CommandHeader
.LUN
.LunAddrBytes
, 0, 8);
3006 cmd
->Request
.CDBLen
= 16;
3007 cmd
->Request
.Type
.Type
= TYPE_MSG
;
3008 cmd
->Request
.Type
.Attribute
= ATTR_HEADOFQUEUE
;
3009 cmd
->Request
.Type
.Direction
= XFER_NONE
;
3010 cmd
->Request
.Timeout
= 0; /* Don't time out */
3011 cmd
->Request
.CDB
[0] = opcode
;
3012 cmd
->Request
.CDB
[1] = type
;
3013 memset(&cmd
->Request
.CDB
[2], 0, 14); /* rest of the CDB is reserved */
3014 cmd
->ErrorDescriptor
.Addr
.lower
= paddr32
+ sizeof(*cmd
);
3015 cmd
->ErrorDescriptor
.Addr
.upper
= 0;
3016 cmd
->ErrorDescriptor
.Len
= sizeof(struct ErrorInfo
);
3018 writel(paddr32
, vaddr
+ SA5_REQUEST_PORT_OFFSET
);
3020 for (i
= 0; i
< HPSA_MSG_SEND_RETRY_LIMIT
; i
++) {
3021 tag
= readl(vaddr
+ SA5_REPLY_PORT_OFFSET
);
3022 if (hpsa_tag_discard_error_bits(tag
) == paddr32
)
3024 msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS
);
3029 /* we leak the DMA buffer here ... no choice since the controller could
3030 * still complete the command.
3032 if (i
== HPSA_MSG_SEND_RETRY_LIMIT
) {
3033 dev_err(&pdev
->dev
, "controller message %02x:%02x timed out\n",
3038 pci_free_consistent(pdev
, cmd_sz
, cmd
, paddr64
);
3040 if (tag
& HPSA_ERROR_BIT
) {
3041 dev_err(&pdev
->dev
, "controller message %02x:%02x failed\n",
3046 dev_info(&pdev
->dev
, "controller message %02x:%02x succeeded\n",
3051 #define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
3052 #define hpsa_noop(p) hpsa_message(p, 3, 0)
3054 static __devinit
int hpsa_reset_msi(struct pci_dev
*pdev
)
3056 /* the #defines are stolen from drivers/pci/msi.h. */
3057 #define msi_control_reg(base) (base + PCI_MSI_FLAGS)
3058 #define PCI_MSIX_FLAGS_ENABLE (1 << 15)
3063 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSI
);
3065 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
3066 if (control
& PCI_MSI_FLAGS_ENABLE
) {
3067 dev_info(&pdev
->dev
, "resetting MSI\n");
3068 pci_write_config_word(pdev
, msi_control_reg(pos
),
3069 control
& ~PCI_MSI_FLAGS_ENABLE
);
3073 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
3075 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
3076 if (control
& PCI_MSIX_FLAGS_ENABLE
) {
3077 dev_info(&pdev
->dev
, "resetting MSI-X\n");
3078 pci_write_config_word(pdev
, msi_control_reg(pos
),
3079 control
& ~PCI_MSIX_FLAGS_ENABLE
);
3086 static int hpsa_controller_hard_reset(struct pci_dev
*pdev
,
3087 void * __iomem vaddr
, bool use_doorbell
)
3093 /* For everything after the P600, the PCI power state method
3094 * of resetting the controller doesn't work, so we have this
3095 * other way using the doorbell register.
3097 dev_info(&pdev
->dev
, "using doorbell to reset controller\n");
3098 writel(DOORBELL_CTLR_RESET
, vaddr
+ SA5_DOORBELL
);
3100 } else { /* Try to do it the PCI power state way */
3102 /* Quoting from the Open CISS Specification: "The Power
3103 * Management Control/Status Register (CSR) controls the power
3104 * state of the device. The normal operating state is D0,
3105 * CSR=00h. The software off state is D3, CSR=03h. To reset
3106 * the controller, place the interface device in D3 then to D0,
3107 * this causes a secondary PCI reset which will reset the
3110 pos
= pci_find_capability(pdev
, PCI_CAP_ID_PM
);
3113 "hpsa_reset_controller: "
3114 "PCI PM not supported\n");
3117 dev_info(&pdev
->dev
, "using PCI PM to reset controller\n");
3118 /* enter the D3hot power management state */
3119 pci_read_config_word(pdev
, pos
+ PCI_PM_CTRL
, &pmcsr
);
3120 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
3122 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
3126 /* enter the D0 power management state */
3127 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
3129 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
3136 /* This does a hard reset of the controller using PCI power management
3137 * states or the using the doorbell register.
3139 static __devinit
int hpsa_kdump_hard_reset_controller(struct pci_dev
*pdev
)
3141 u16 saved_config_space
[32];
3144 u64 cfg_base_addr_index
;
3145 void __iomem
*vaddr
;
3146 unsigned long paddr
;
3147 u32 misc_fw_support
, active_transport
;
3149 struct CfgTable __iomem
*cfgtable
;
3153 /* For controllers as old as the P600, this is very nearly
3156 * pci_save_state(pci_dev);
3157 * pci_set_power_state(pci_dev, PCI_D3hot);
3158 * pci_set_power_state(pci_dev, PCI_D0);
3159 * pci_restore_state(pci_dev);
3161 * but we can't use these nice canned kernel routines on
3162 * kexec, because they also check the MSI/MSI-X state in PCI
3163 * configuration space and do the wrong thing when it is
3164 * set/cleared. Also, the pci_save/restore_state functions
3165 * violate the ordering requirements for restoring the
3166 * configuration space from the CCISS document (see the
3167 * comment below). So we roll our own ....
3169 * For controllers newer than the P600, the pci power state
3170 * method of resetting doesn't work so we have another way
3171 * using the doorbell register.
3174 /* Exclude 640x boards. These are two pci devices in one slot
3175 * which share a battery backed cache module. One controls the
3176 * cache, the other accesses the cache through the one that controls
3177 * it. If we reset the one controlling the cache, the other will
3178 * likely not be happy. Just forbid resetting this conjoined mess.
3179 * The 640x isn't really supported by hpsa anyway.
3181 hpsa_lookup_board_id(pdev
, &board_id
);
3182 if (board_id
== 0x409C0E11 || board_id
== 0x409D0E11)
3185 for (i
= 0; i
< 32; i
++)
3186 pci_read_config_word(pdev
, 2*i
, &saved_config_space
[i
]);
3189 /* find the first memory BAR, so we can find the cfg table */
3190 rc
= hpsa_pci_find_memory_BAR(pdev
, &paddr
);
3193 vaddr
= remap_pci_mem(paddr
, 0x250);
3197 /* find cfgtable in order to check if reset via doorbell is supported */
3198 rc
= hpsa_find_cfg_addrs(pdev
, vaddr
, &cfg_base_addr
,
3199 &cfg_base_addr_index
, &cfg_offset
);
3202 cfgtable
= remap_pci_mem(pci_resource_start(pdev
,
3203 cfg_base_addr_index
) + cfg_offset
, sizeof(*cfgtable
));
3209 /* If reset via doorbell register is supported, use that. */
3210 misc_fw_support
= readl(&cfgtable
->misc_fw_support
);
3211 use_doorbell
= misc_fw_support
& MISC_FW_DOORBELL_RESET
;
3213 /* The doorbell reset seems to cause lockups on some Smart
3214 * Arrays (e.g. P410, P410i, maybe others). Until this is
3215 * fixed or at least isolated, avoid the doorbell reset.
3219 rc
= hpsa_controller_hard_reset(pdev
, vaddr
, use_doorbell
);
3221 goto unmap_cfgtable
;
3223 /* Restore the PCI configuration space. The Open CISS
3224 * Specification says, "Restore the PCI Configuration
3225 * Registers, offsets 00h through 60h. It is important to
3226 * restore the command register, 16-bits at offset 04h,
3227 * last. Do not restore the configuration status register,
3228 * 16-bits at offset 06h." Note that the offset is 2*i.
3230 for (i
= 0; i
< 32; i
++) {
3231 if (i
== 2 || i
== 3)
3233 pci_write_config_word(pdev
, 2*i
, saved_config_space
[i
]);
3236 pci_write_config_word(pdev
, 4, saved_config_space
[2]);
3238 /* Some devices (notably the HP Smart Array 5i Controller)
3239 need a little pause here */
3240 msleep(HPSA_POST_RESET_PAUSE_MSECS
);
3242 /* Controller should be in simple mode at this point. If it's not,
3243 * It means we're on one of those controllers which doesn't support
3244 * the doorbell reset method and on which the PCI power management reset
3245 * method doesn't work (P800, for example.)
3246 * In those cases, pretend the reset worked and hope for the best.
3248 active_transport
= readl(&cfgtable
->TransportActive
);
3249 if (active_transport
& PERFORMANT_MODE
) {
3250 dev_warn(&pdev
->dev
, "Unable to successfully reset controller,"
3251 " proceeding anyway.\n");
3264 * We cannot read the structure directly, for portability we must use
3266 * This is for debug only.
3268 static void print_cfg_table(struct device
*dev
, struct CfgTable
*tb
)
3274 dev_info(dev
, "Controller Configuration information\n");
3275 dev_info(dev
, "------------------------------------\n");
3276 for (i
= 0; i
< 4; i
++)
3277 temp_name
[i
] = readb(&(tb
->Signature
[i
]));
3278 temp_name
[4] = '\0';
3279 dev_info(dev
, " Signature = %s\n", temp_name
);
3280 dev_info(dev
, " Spec Number = %d\n", readl(&(tb
->SpecValence
)));
3281 dev_info(dev
, " Transport methods supported = 0x%x\n",
3282 readl(&(tb
->TransportSupport
)));
3283 dev_info(dev
, " Transport methods active = 0x%x\n",
3284 readl(&(tb
->TransportActive
)));
3285 dev_info(dev
, " Requested transport Method = 0x%x\n",
3286 readl(&(tb
->HostWrite
.TransportRequest
)));
3287 dev_info(dev
, " Coalesce Interrupt Delay = 0x%x\n",
3288 readl(&(tb
->HostWrite
.CoalIntDelay
)));
3289 dev_info(dev
, " Coalesce Interrupt Count = 0x%x\n",
3290 readl(&(tb
->HostWrite
.CoalIntCount
)));
3291 dev_info(dev
, " Max outstanding commands = 0x%d\n",
3292 readl(&(tb
->CmdsOutMax
)));
3293 dev_info(dev
, " Bus Types = 0x%x\n", readl(&(tb
->BusTypes
)));
3294 for (i
= 0; i
< 16; i
++)
3295 temp_name
[i
] = readb(&(tb
->ServerName
[i
]));
3296 temp_name
[16] = '\0';
3297 dev_info(dev
, " Server Name = %s\n", temp_name
);
3298 dev_info(dev
, " Heartbeat Counter = 0x%x\n\n\n",
3299 readl(&(tb
->HeartBeat
)));
3300 #endif /* HPSA_DEBUG */
3303 static int find_PCI_BAR_index(struct pci_dev
*pdev
, unsigned long pci_bar_addr
)
3305 int i
, offset
, mem_type
, bar_type
;
3307 if (pci_bar_addr
== PCI_BASE_ADDRESS_0
) /* looking for BAR zero? */
3310 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3311 bar_type
= pci_resource_flags(pdev
, i
) & PCI_BASE_ADDRESS_SPACE
;
3312 if (bar_type
== PCI_BASE_ADDRESS_SPACE_IO
)
3315 mem_type
= pci_resource_flags(pdev
, i
) &
3316 PCI_BASE_ADDRESS_MEM_TYPE_MASK
;
3318 case PCI_BASE_ADDRESS_MEM_TYPE_32
:
3319 case PCI_BASE_ADDRESS_MEM_TYPE_1M
:
3320 offset
+= 4; /* 32 bit */
3322 case PCI_BASE_ADDRESS_MEM_TYPE_64
:
3325 default: /* reserved in PCI 2.2 */
3326 dev_warn(&pdev
->dev
,
3327 "base address is invalid\n");
3332 if (offset
== pci_bar_addr
- PCI_BASE_ADDRESS_0
)
3338 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
3339 * controllers that are capable. If not, we use IO-APIC mode.
3342 static void __devinit
hpsa_interrupt_mode(struct ctlr_info
*h
)
3344 #ifdef CONFIG_PCI_MSI
3346 struct msix_entry hpsa_msix_entries
[4] = { {0, 0}, {0, 1},
3350 /* Some boards advertise MSI but don't really support it */
3351 if ((h
->board_id
== 0x40700E11) || (h
->board_id
== 0x40800E11) ||
3352 (h
->board_id
== 0x40820E11) || (h
->board_id
== 0x40830E11))
3353 goto default_int_mode
;
3354 if (pci_find_capability(h
->pdev
, PCI_CAP_ID_MSIX
)) {
3355 dev_info(&h
->pdev
->dev
, "MSIX\n");
3356 err
= pci_enable_msix(h
->pdev
, hpsa_msix_entries
, 4);
3358 h
->intr
[0] = hpsa_msix_entries
[0].vector
;
3359 h
->intr
[1] = hpsa_msix_entries
[1].vector
;
3360 h
->intr
[2] = hpsa_msix_entries
[2].vector
;
3361 h
->intr
[3] = hpsa_msix_entries
[3].vector
;
3366 dev_warn(&h
->pdev
->dev
, "only %d MSI-X vectors "
3367 "available\n", err
);
3368 goto default_int_mode
;
3370 dev_warn(&h
->pdev
->dev
, "MSI-X init failed %d\n",
3372 goto default_int_mode
;
3375 if (pci_find_capability(h
->pdev
, PCI_CAP_ID_MSI
)) {
3376 dev_info(&h
->pdev
->dev
, "MSI\n");
3377 if (!pci_enable_msi(h
->pdev
))
3380 dev_warn(&h
->pdev
->dev
, "MSI init failed\n");
3383 #endif /* CONFIG_PCI_MSI */
3384 /* if we get here we're going to use the default interrupt mode */
3385 h
->intr
[PERF_MODE_INT
] = h
->pdev
->irq
;
3388 static int __devinit
hpsa_lookup_board_id(struct pci_dev
*pdev
, u32
*board_id
)
3391 u32 subsystem_vendor_id
, subsystem_device_id
;
3393 subsystem_vendor_id
= pdev
->subsystem_vendor
;
3394 subsystem_device_id
= pdev
->subsystem_device
;
3395 *board_id
= ((subsystem_device_id
<< 16) & 0xffff0000) |
3396 subsystem_vendor_id
;
3398 for (i
= 0; i
< ARRAY_SIZE(products
); i
++)
3399 if (*board_id
== products
[i
].board_id
)
3402 if ((subsystem_vendor_id
!= PCI_VENDOR_ID_HP
&&
3403 subsystem_vendor_id
!= PCI_VENDOR_ID_COMPAQ
) ||
3405 dev_warn(&pdev
->dev
, "unrecognized board ID: "
3406 "0x%08x, ignoring.\n", *board_id
);
3409 return ARRAY_SIZE(products
) - 1; /* generic unknown smart array */
3412 static inline bool hpsa_board_disabled(struct pci_dev
*pdev
)
3416 (void) pci_read_config_word(pdev
, PCI_COMMAND
, &command
);
3417 return ((command
& PCI_COMMAND_MEMORY
) == 0);
3420 static int __devinit
hpsa_pci_find_memory_BAR(struct pci_dev
*pdev
,
3421 unsigned long *memory_bar
)
3425 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++)
3426 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
) {
3427 /* addressing mode bits already removed */
3428 *memory_bar
= pci_resource_start(pdev
, i
);
3429 dev_dbg(&pdev
->dev
, "memory BAR = %lx\n",
3433 dev_warn(&pdev
->dev
, "no memory BAR found\n");
3437 static int __devinit
hpsa_wait_for_board_ready(struct ctlr_info
*h
)
3442 for (i
= 0; i
< HPSA_BOARD_READY_ITERATIONS
; i
++) {
3443 scratchpad
= readl(h
->vaddr
+ SA5_SCRATCHPAD_OFFSET
);
3444 if (scratchpad
== HPSA_FIRMWARE_READY
)
3446 msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS
);
3448 dev_warn(&h
->pdev
->dev
, "board not ready, timed out.\n");
3452 static int __devinit
hpsa_find_cfg_addrs(struct pci_dev
*pdev
,
3453 void __iomem
*vaddr
, u32
*cfg_base_addr
, u64
*cfg_base_addr_index
,
3456 *cfg_base_addr
= readl(vaddr
+ SA5_CTCFG_OFFSET
);
3457 *cfg_offset
= readl(vaddr
+ SA5_CTMEM_OFFSET
);
3458 *cfg_base_addr
&= (u32
) 0x0000ffff;
3459 *cfg_base_addr_index
= find_PCI_BAR_index(pdev
, *cfg_base_addr
);
3460 if (*cfg_base_addr_index
== -1) {
3461 dev_warn(&pdev
->dev
, "cannot find cfg_base_addr_index\n");
3467 static int __devinit
hpsa_find_cfgtables(struct ctlr_info
*h
)
3471 u64 cfg_base_addr_index
;
3475 rc
= hpsa_find_cfg_addrs(h
->pdev
, h
->vaddr
, &cfg_base_addr
,
3476 &cfg_base_addr_index
, &cfg_offset
);
3479 h
->cfgtable
= remap_pci_mem(pci_resource_start(h
->pdev
,
3480 cfg_base_addr_index
) + cfg_offset
, sizeof(*h
->cfgtable
));
3483 /* Find performant mode table. */
3484 trans_offset
= readl(&h
->cfgtable
->TransMethodOffset
);
3485 h
->transtable
= remap_pci_mem(pci_resource_start(h
->pdev
,
3486 cfg_base_addr_index
)+cfg_offset
+trans_offset
,
3487 sizeof(*h
->transtable
));
3493 static void __devinit
hpsa_get_max_perf_mode_cmds(struct ctlr_info
*h
)
3495 h
->max_commands
= readl(&(h
->cfgtable
->MaxPerformantModeCommands
));
3496 if (h
->max_commands
< 16) {
3497 dev_warn(&h
->pdev
->dev
, "Controller reports "
3498 "max supported commands of %d, an obvious lie. "
3499 "Using 16. Ensure that firmware is up to date.\n",
3501 h
->max_commands
= 16;
3505 /* Interrogate the hardware for some limits:
3506 * max commands, max SG elements without chaining, and with chaining,
3507 * SG chain block size, etc.
3509 static void __devinit
hpsa_find_board_params(struct ctlr_info
*h
)
3511 hpsa_get_max_perf_mode_cmds(h
);
3512 h
->nr_cmds
= h
->max_commands
- 4; /* Allow room for some ioctls */
3513 h
->maxsgentries
= readl(&(h
->cfgtable
->MaxScatterGatherElements
));
3515 * Limit in-command s/g elements to 32 save dma'able memory.
3516 * Howvever spec says if 0, use 31
3518 h
->max_cmd_sg_entries
= 31;
3519 if (h
->maxsgentries
> 512) {
3520 h
->max_cmd_sg_entries
= 32;
3521 h
->chainsize
= h
->maxsgentries
- h
->max_cmd_sg_entries
+ 1;
3522 h
->maxsgentries
--; /* save one for chain pointer */
3524 h
->maxsgentries
= 31; /* default to traditional values */
3529 static inline bool hpsa_CISS_signature_present(struct ctlr_info
*h
)
3531 if ((readb(&h
->cfgtable
->Signature
[0]) != 'C') ||
3532 (readb(&h
->cfgtable
->Signature
[1]) != 'I') ||
3533 (readb(&h
->cfgtable
->Signature
[2]) != 'S') ||
3534 (readb(&h
->cfgtable
->Signature
[3]) != 'S')) {
3535 dev_warn(&h
->pdev
->dev
, "not a valid CISS config table\n");
3541 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3542 static inline void hpsa_enable_scsi_prefetch(struct ctlr_info
*h
)
3547 prefetch
= readl(&(h
->cfgtable
->SCSI_Prefetch
));
3549 writel(prefetch
, &(h
->cfgtable
->SCSI_Prefetch
));
3553 /* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
3554 * in a prefetch beyond physical memory.
3556 static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info
*h
)
3560 if (h
->board_id
!= 0x3225103C)
3562 dma_prefetch
= readl(h
->vaddr
+ I2O_DMA1_CFG
);
3563 dma_prefetch
|= 0x8000;
3564 writel(dma_prefetch
, h
->vaddr
+ I2O_DMA1_CFG
);
3567 static void __devinit
hpsa_wait_for_mode_change_ack(struct ctlr_info
*h
)
3571 /* under certain very rare conditions, this can take awhile.
3572 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3573 * as we enter this code.)
3575 for (i
= 0; i
< MAX_CONFIG_WAIT
; i
++) {
3576 if (!(readl(h
->vaddr
+ SA5_DOORBELL
) & CFGTBL_ChangeReq
))
3578 /* delay and try again */
3583 static int __devinit
hpsa_enter_simple_mode(struct ctlr_info
*h
)
3587 trans_support
= readl(&(h
->cfgtable
->TransportSupport
));
3588 if (!(trans_support
& SIMPLE_MODE
))
3591 h
->max_commands
= readl(&(h
->cfgtable
->CmdsOutMax
));
3592 /* Update the field, and then ring the doorbell */
3593 writel(CFGTBL_Trans_Simple
, &(h
->cfgtable
->HostWrite
.TransportRequest
));
3594 writel(CFGTBL_ChangeReq
, h
->vaddr
+ SA5_DOORBELL
);
3595 hpsa_wait_for_mode_change_ack(h
);
3596 print_cfg_table(&h
->pdev
->dev
, h
->cfgtable
);
3597 if (!(readl(&(h
->cfgtable
->TransportActive
)) & CFGTBL_Trans_Simple
)) {
3598 dev_warn(&h
->pdev
->dev
,
3599 "unable to get board into simple mode\n");
3605 static int __devinit
hpsa_pci_init(struct ctlr_info
*h
)
3607 int prod_index
, err
;
3609 prod_index
= hpsa_lookup_board_id(h
->pdev
, &h
->board_id
);
3612 h
->product_name
= products
[prod_index
].product_name
;
3613 h
->access
= *(products
[prod_index
].access
);
3615 if (hpsa_board_disabled(h
->pdev
)) {
3616 dev_warn(&h
->pdev
->dev
, "controller appears to be disabled\n");
3619 err
= pci_enable_device(h
->pdev
);
3621 dev_warn(&h
->pdev
->dev
, "unable to enable PCI device\n");
3625 err
= pci_request_regions(h
->pdev
, "hpsa");
3627 dev_err(&h
->pdev
->dev
,
3628 "cannot obtain PCI resources, aborting\n");
3631 hpsa_interrupt_mode(h
);
3632 err
= hpsa_pci_find_memory_BAR(h
->pdev
, &h
->paddr
);
3634 goto err_out_free_res
;
3635 h
->vaddr
= remap_pci_mem(h
->paddr
, 0x250);
3638 goto err_out_free_res
;
3640 err
= hpsa_wait_for_board_ready(h
);
3642 goto err_out_free_res
;
3643 err
= hpsa_find_cfgtables(h
);
3645 goto err_out_free_res
;
3646 hpsa_find_board_params(h
);
3648 if (!hpsa_CISS_signature_present(h
)) {
3650 goto err_out_free_res
;
3652 hpsa_enable_scsi_prefetch(h
);
3653 hpsa_p600_dma_prefetch_quirk(h
);
3654 err
= hpsa_enter_simple_mode(h
);
3656 goto err_out_free_res
;
3661 iounmap(h
->transtable
);
3663 iounmap(h
->cfgtable
);
3667 * Deliberately omit pci_disable_device(): it does something nasty to
3668 * Smart Array controllers that pci_enable_device does not undo
3670 pci_release_regions(h
->pdev
);
3674 static void __devinit
hpsa_hba_inquiry(struct ctlr_info
*h
)
3678 #define HBA_INQUIRY_BYTE_COUNT 64
3679 h
->hba_inquiry_data
= kmalloc(HBA_INQUIRY_BYTE_COUNT
, GFP_KERNEL
);
3680 if (!h
->hba_inquiry_data
)
3682 rc
= hpsa_scsi_do_inquiry(h
, RAID_CTLR_LUNID
, 0,
3683 h
->hba_inquiry_data
, HBA_INQUIRY_BYTE_COUNT
);
3685 kfree(h
->hba_inquiry_data
);
3686 h
->hba_inquiry_data
= NULL
;
3690 static __devinit
int hpsa_init_reset_devices(struct pci_dev
*pdev
)
3697 /* Reset the controller with a PCI power-cycle or via doorbell */
3698 rc
= hpsa_kdump_hard_reset_controller(pdev
);
3700 /* -ENOTSUPP here means we cannot reset the controller
3701 * but it's already (and still) up and running in
3702 * "performant mode". Or, it might be 640x, which can't reset
3703 * due to concerns about shared bbwc between 6402/6404 pair.
3705 if (rc
== -ENOTSUPP
)
3706 return 0; /* just try to do the kdump anyhow. */
3709 if (hpsa_reset_msi(pdev
))
3712 /* Now try to get the controller to respond to a no-op */
3713 for (i
= 0; i
< HPSA_POST_RESET_NOOP_RETRIES
; i
++) {
3714 if (hpsa_noop(pdev
) == 0)
3717 dev_warn(&pdev
->dev
, "no-op failed%s\n",
3718 (i
< 11 ? "; re-trying" : ""));
3723 static int __devinit
hpsa_init_one(struct pci_dev
*pdev
,
3724 const struct pci_device_id
*ent
)
3727 struct ctlr_info
*h
;
3729 if (number_of_controllers
== 0)
3730 printk(KERN_INFO DRIVER_NAME
"\n");
3732 rc
= hpsa_init_reset_devices(pdev
);
3736 /* Command structures must be aligned on a 32-byte boundary because
3737 * the 5 lower bits of the address are used by the hardware. and by
3738 * the driver. See comments in hpsa.h for more info.
3740 #define COMMANDLIST_ALIGNMENT 32
3741 BUILD_BUG_ON(sizeof(struct CommandList
) % COMMANDLIST_ALIGNMENT
);
3742 h
= kzalloc(sizeof(*h
), GFP_KERNEL
);
3747 h
->busy_initializing
= 1;
3748 INIT_HLIST_HEAD(&h
->cmpQ
);
3749 INIT_HLIST_HEAD(&h
->reqQ
);
3750 rc
= hpsa_pci_init(h
);
3754 sprintf(h
->devname
, "hpsa%d", number_of_controllers
);
3755 h
->ctlr
= number_of_controllers
;
3756 number_of_controllers
++;
3758 /* configure PCI DMA stuff */
3759 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(64));
3763 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
3767 dev_err(&pdev
->dev
, "no suitable DMA available\n");
3772 /* make sure the board interrupts are off */
3773 h
->access
.set_intr_mask(h
, HPSA_INTR_OFF
);
3775 if (h
->msix_vector
|| h
->msi_vector
)
3776 rc
= request_irq(h
->intr
[PERF_MODE_INT
], do_hpsa_intr_msi
,
3777 IRQF_DISABLED
, h
->devname
, h
);
3779 rc
= request_irq(h
->intr
[PERF_MODE_INT
], do_hpsa_intr_intx
,
3780 IRQF_DISABLED
, h
->devname
, h
);
3782 dev_err(&pdev
->dev
, "unable to get irq %d for %s\n",
3783 h
->intr
[PERF_MODE_INT
], h
->devname
);
3787 dev_info(&pdev
->dev
, "%s: <0x%x> at IRQ %d%s using DAC\n",
3788 h
->devname
, pdev
->device
,
3789 h
->intr
[PERF_MODE_INT
], dac
? "" : " not");
3792 kmalloc(((h
->nr_cmds
+ BITS_PER_LONG
-
3793 1) / BITS_PER_LONG
) * sizeof(unsigned long), GFP_KERNEL
);
3794 h
->cmd_pool
= pci_alloc_consistent(h
->pdev
,
3795 h
->nr_cmds
* sizeof(*h
->cmd_pool
),
3796 &(h
->cmd_pool_dhandle
));
3797 h
->errinfo_pool
= pci_alloc_consistent(h
->pdev
,
3798 h
->nr_cmds
* sizeof(*h
->errinfo_pool
),
3799 &(h
->errinfo_pool_dhandle
));
3800 if ((h
->cmd_pool_bits
== NULL
)
3801 || (h
->cmd_pool
== NULL
)
3802 || (h
->errinfo_pool
== NULL
)) {
3803 dev_err(&pdev
->dev
, "out of memory");
3807 if (hpsa_allocate_sg_chain_blocks(h
))
3809 spin_lock_init(&h
->lock
);
3810 spin_lock_init(&h
->scan_lock
);
3811 init_waitqueue_head(&h
->scan_wait_queue
);
3812 h
->scan_finished
= 1; /* no scan currently in progress */
3814 pci_set_drvdata(pdev
, h
);
3815 memset(h
->cmd_pool_bits
, 0,
3816 ((h
->nr_cmds
+ BITS_PER_LONG
-
3817 1) / BITS_PER_LONG
) * sizeof(unsigned long));
3821 /* Turn the interrupts on so we can service requests */
3822 h
->access
.set_intr_mask(h
, HPSA_INTR_ON
);
3824 hpsa_put_ctlr_into_performant_mode(h
);
3825 hpsa_hba_inquiry(h
);
3826 hpsa_register_scsi(h
); /* hook ourselves into SCSI subsystem */
3827 h
->busy_initializing
= 0;
3831 hpsa_free_sg_chain_blocks(h
);
3832 kfree(h
->cmd_pool_bits
);
3834 pci_free_consistent(h
->pdev
,
3835 h
->nr_cmds
* sizeof(struct CommandList
),
3836 h
->cmd_pool
, h
->cmd_pool_dhandle
);
3837 if (h
->errinfo_pool
)
3838 pci_free_consistent(h
->pdev
,
3839 h
->nr_cmds
* sizeof(struct ErrorInfo
),
3841 h
->errinfo_pool_dhandle
);
3842 free_irq(h
->intr
[PERF_MODE_INT
], h
);
3845 h
->busy_initializing
= 0;
3850 static void hpsa_flush_cache(struct ctlr_info
*h
)
3853 struct CommandList
*c
;
3855 flush_buf
= kzalloc(4, GFP_KERNEL
);
3859 c
= cmd_special_alloc(h
);
3861 dev_warn(&h
->pdev
->dev
, "cmd_special_alloc returned NULL!\n");
3864 fill_cmd(c
, HPSA_CACHE_FLUSH
, h
, flush_buf
, 4, 0,
3865 RAID_CTLR_LUNID
, TYPE_CMD
);
3866 hpsa_scsi_do_simple_cmd_with_retry(h
, c
, PCI_DMA_TODEVICE
);
3867 if (c
->err_info
->CommandStatus
!= 0)
3868 dev_warn(&h
->pdev
->dev
,
3869 "error flushing cache on controller\n");
3870 cmd_special_free(h
, c
);
3875 static void hpsa_shutdown(struct pci_dev
*pdev
)
3877 struct ctlr_info
*h
;
3879 h
= pci_get_drvdata(pdev
);
3880 /* Turn board interrupts off and send the flush cache command
3881 * sendcmd will turn off interrupt, and send the flush...
3882 * To write all data in the battery backed cache to disks
3884 hpsa_flush_cache(h
);
3885 h
->access
.set_intr_mask(h
, HPSA_INTR_OFF
);
3886 free_irq(h
->intr
[PERF_MODE_INT
], h
);
3887 #ifdef CONFIG_PCI_MSI
3889 pci_disable_msix(h
->pdev
);
3890 else if (h
->msi_vector
)
3891 pci_disable_msi(h
->pdev
);
3892 #endif /* CONFIG_PCI_MSI */
3895 static void __devexit
hpsa_remove_one(struct pci_dev
*pdev
)
3897 struct ctlr_info
*h
;
3899 if (pci_get_drvdata(pdev
) == NULL
) {
3900 dev_err(&pdev
->dev
, "unable to remove device \n");
3903 h
= pci_get_drvdata(pdev
);
3904 hpsa_unregister_scsi(h
); /* unhook from SCSI subsystem */
3905 hpsa_shutdown(pdev
);
3907 iounmap(h
->transtable
);
3908 iounmap(h
->cfgtable
);
3909 hpsa_free_sg_chain_blocks(h
);
3910 pci_free_consistent(h
->pdev
,
3911 h
->nr_cmds
* sizeof(struct CommandList
),
3912 h
->cmd_pool
, h
->cmd_pool_dhandle
);
3913 pci_free_consistent(h
->pdev
,
3914 h
->nr_cmds
* sizeof(struct ErrorInfo
),
3915 h
->errinfo_pool
, h
->errinfo_pool_dhandle
);
3916 pci_free_consistent(h
->pdev
, h
->reply_pool_size
,
3917 h
->reply_pool
, h
->reply_pool_dhandle
);
3918 kfree(h
->cmd_pool_bits
);
3919 kfree(h
->blockFetchTable
);
3920 kfree(h
->hba_inquiry_data
);
3922 * Deliberately omit pci_disable_device(): it does something nasty to
3923 * Smart Array controllers that pci_enable_device does not undo
3925 pci_release_regions(pdev
);
3926 pci_set_drvdata(pdev
, NULL
);
3930 static int hpsa_suspend(__attribute__((unused
)) struct pci_dev
*pdev
,
3931 __attribute__((unused
)) pm_message_t state
)
3936 static int hpsa_resume(__attribute__((unused
)) struct pci_dev
*pdev
)
3941 static struct pci_driver hpsa_pci_driver
= {
3943 .probe
= hpsa_init_one
,
3944 .remove
= __devexit_p(hpsa_remove_one
),
3945 .id_table
= hpsa_pci_device_id
, /* id_table */
3946 .shutdown
= hpsa_shutdown
,
3947 .suspend
= hpsa_suspend
,
3948 .resume
= hpsa_resume
,
3951 /* Fill in bucket_map[], given nsgs (the max number of
3952 * scatter gather elements supported) and bucket[],
3953 * which is an array of 8 integers. The bucket[] array
3954 * contains 8 different DMA transfer sizes (in 16
3955 * byte increments) which the controller uses to fetch
3956 * commands. This function fills in bucket_map[], which
3957 * maps a given number of scatter gather elements to one of
3958 * the 8 DMA transfer sizes. The point of it is to allow the
3959 * controller to only do as much DMA as needed to fetch the
3960 * command, with the DMA transfer size encoded in the lower
3961 * bits of the command address.
3963 static void calc_bucket_map(int bucket
[], int num_buckets
,
3964 int nsgs
, int *bucket_map
)
3968 /* even a command with 0 SGs requires 4 blocks */
3969 #define MINIMUM_TRANSFER_BLOCKS 4
3970 #define NUM_BUCKETS 8
3971 /* Note, bucket_map must have nsgs+1 entries. */
3972 for (i
= 0; i
<= nsgs
; i
++) {
3973 /* Compute size of a command with i SG entries */
3974 size
= i
+ MINIMUM_TRANSFER_BLOCKS
;
3975 b
= num_buckets
; /* Assume the biggest bucket */
3976 /* Find the bucket that is just big enough */
3977 for (j
= 0; j
< 8; j
++) {
3978 if (bucket
[j
] >= size
) {
3983 /* for a command with i SG entries, use bucket b. */
3988 static __devinit
void hpsa_enter_performant_mode(struct ctlr_info
*h
)
3991 unsigned long register_value
;
3993 /* This is a bit complicated. There are 8 registers on
3994 * the controller which we write to to tell it 8 different
3995 * sizes of commands which there may be. It's a way of
3996 * reducing the DMA done to fetch each command. Encoded into
3997 * each command's tag are 3 bits which communicate to the controller
3998 * which of the eight sizes that command fits within. The size of
3999 * each command depends on how many scatter gather entries there are.
4000 * Each SG entry requires 16 bytes. The eight registers are programmed
4001 * with the number of 16-byte blocks a command of that size requires.
4002 * The smallest command possible requires 5 such 16 byte blocks.
4003 * the largest command possible requires MAXSGENTRIES + 4 16-byte
4004 * blocks. Note, this only extends to the SG entries contained
4005 * within the command block, and does not extend to chained blocks
4006 * of SG elements. bft[] contains the eight values we write to
4007 * the registers. They are not evenly distributed, but have more
4008 * sizes for small commands, and fewer sizes for larger commands.
4010 int bft
[8] = {5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES
+ 4};
4011 BUILD_BUG_ON(28 > MAXSGENTRIES
+ 4);
4012 /* 5 = 1 s/g entry or 4k
4013 * 6 = 2 s/g entry or 8k
4014 * 8 = 4 s/g entry or 16k
4015 * 10 = 6 s/g entry or 24k
4018 h
->reply_pool_wraparound
= 1; /* spec: init to 1 */
4020 /* Controller spec: zero out this buffer. */
4021 memset(h
->reply_pool
, 0, h
->reply_pool_size
);
4022 h
->reply_pool_head
= h
->reply_pool
;
4024 bft
[7] = h
->max_sg_entries
+ 4;
4025 calc_bucket_map(bft
, ARRAY_SIZE(bft
), 32, h
->blockFetchTable
);
4026 for (i
= 0; i
< 8; i
++)
4027 writel(bft
[i
], &h
->transtable
->BlockFetch
[i
]);
4029 /* size of controller ring buffer */
4030 writel(h
->max_commands
, &h
->transtable
->RepQSize
);
4031 writel(1, &h
->transtable
->RepQCount
);
4032 writel(0, &h
->transtable
->RepQCtrAddrLow32
);
4033 writel(0, &h
->transtable
->RepQCtrAddrHigh32
);
4034 writel(h
->reply_pool_dhandle
, &h
->transtable
->RepQAddr0Low32
);
4035 writel(0, &h
->transtable
->RepQAddr0High32
);
4036 writel(CFGTBL_Trans_Performant
,
4037 &(h
->cfgtable
->HostWrite
.TransportRequest
));
4038 writel(CFGTBL_ChangeReq
, h
->vaddr
+ SA5_DOORBELL
);
4039 hpsa_wait_for_mode_change_ack(h
);
4040 register_value
= readl(&(h
->cfgtable
->TransportActive
));
4041 if (!(register_value
& CFGTBL_Trans_Performant
)) {
4042 dev_warn(&h
->pdev
->dev
, "unable to get board into"
4043 " performant mode\n");
4048 static __devinit
void hpsa_put_ctlr_into_performant_mode(struct ctlr_info
*h
)
4052 trans_support
= readl(&(h
->cfgtable
->TransportSupport
));
4053 if (!(trans_support
& PERFORMANT_MODE
))
4056 hpsa_get_max_perf_mode_cmds(h
);
4057 h
->max_sg_entries
= 32;
4058 /* Performant mode ring buffer and supporting data structures */
4059 h
->reply_pool_size
= h
->max_commands
* sizeof(u64
);
4060 h
->reply_pool
= pci_alloc_consistent(h
->pdev
, h
->reply_pool_size
,
4061 &(h
->reply_pool_dhandle
));
4063 /* Need a block fetch table for performant mode */
4064 h
->blockFetchTable
= kmalloc(((h
->max_sg_entries
+1) *
4065 sizeof(u32
)), GFP_KERNEL
);
4067 if ((h
->reply_pool
== NULL
)
4068 || (h
->blockFetchTable
== NULL
))
4071 hpsa_enter_performant_mode(h
);
4073 /* Change the access methods to the performant access methods */
4074 h
->access
= SA5_performant_access
;
4075 h
->transMethod
= CFGTBL_Trans_Performant
;
4081 pci_free_consistent(h
->pdev
, h
->reply_pool_size
,
4082 h
->reply_pool
, h
->reply_pool_dhandle
);
4083 kfree(h
->blockFetchTable
);
4087 * This is it. Register the PCI driver information for the cards we control
4088 * the OS will call our registered routines when it finds one of our cards.
4090 static int __init
hpsa_init(void)
4092 return pci_register_driver(&hpsa_pci_driver
);
4095 static void __exit
hpsa_cleanup(void)
4097 pci_unregister_driver(&hpsa_pci_driver
);
4100 module_init(hpsa_init
);
4101 module_exit(hpsa_cleanup
);