ptrace: cleanup arch_ptrace() and friends on Blackfin
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-x1205.c
blob9aae49139a0a81d8b75c1822c9dd5d55f526893b
1 /*
2 * An i2c driver for the Xicor/Intersil X1205 RTC
3 * Copyright 2004 Karen Spearel
4 * Copyright 2005 Alessandro Zummo
6 * please send all reports to:
7 * Karen Spearel <kas111 at gmail dot com>
8 * Alessandro Zummo <a.zummo@towertech.it>
10 * based on a lot of other RTC drivers.
12 * Information and datasheet:
13 * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
20 #include <linux/i2c.h>
21 #include <linux/bcd.h>
22 #include <linux/rtc.h>
23 #include <linux/delay.h>
25 #define DRV_VERSION "1.0.8"
27 /* offsets into CCR area */
29 #define CCR_SEC 0
30 #define CCR_MIN 1
31 #define CCR_HOUR 2
32 #define CCR_MDAY 3
33 #define CCR_MONTH 4
34 #define CCR_YEAR 5
35 #define CCR_WDAY 6
36 #define CCR_Y2K 7
38 #define X1205_REG_SR 0x3F /* status register */
39 #define X1205_REG_Y2K 0x37
40 #define X1205_REG_DW 0x36
41 #define X1205_REG_YR 0x35
42 #define X1205_REG_MO 0x34
43 #define X1205_REG_DT 0x33
44 #define X1205_REG_HR 0x32
45 #define X1205_REG_MN 0x31
46 #define X1205_REG_SC 0x30
47 #define X1205_REG_DTR 0x13
48 #define X1205_REG_ATR 0x12
49 #define X1205_REG_INT 0x11
50 #define X1205_REG_0 0x10
51 #define X1205_REG_Y2K1 0x0F
52 #define X1205_REG_DWA1 0x0E
53 #define X1205_REG_YRA1 0x0D
54 #define X1205_REG_MOA1 0x0C
55 #define X1205_REG_DTA1 0x0B
56 #define X1205_REG_HRA1 0x0A
57 #define X1205_REG_MNA1 0x09
58 #define X1205_REG_SCA1 0x08
59 #define X1205_REG_Y2K0 0x07
60 #define X1205_REG_DWA0 0x06
61 #define X1205_REG_YRA0 0x05
62 #define X1205_REG_MOA0 0x04
63 #define X1205_REG_DTA0 0x03
64 #define X1205_REG_HRA0 0x02
65 #define X1205_REG_MNA0 0x01
66 #define X1205_REG_SCA0 0x00
68 #define X1205_CCR_BASE 0x30 /* Base address of CCR */
69 #define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
71 #define X1205_SR_RTCF 0x01 /* Clock failure */
72 #define X1205_SR_WEL 0x02 /* Write Enable Latch */
73 #define X1205_SR_RWEL 0x04 /* Register Write Enable */
74 #define X1205_SR_AL0 0x20 /* Alarm 0 match */
76 #define X1205_DTR_DTR0 0x01
77 #define X1205_DTR_DTR1 0x02
78 #define X1205_DTR_DTR2 0x04
80 #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
82 #define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
84 static struct i2c_driver x1205_driver;
87 * In the routines that deal directly with the x1205 hardware, we use
88 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
89 * Epoch is initialized as 2000. Time is set to UTC.
91 static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
92 unsigned char reg_base)
94 unsigned char dt_addr[2] = { 0, reg_base };
95 unsigned char buf[8];
96 int i;
98 struct i2c_msg msgs[] = {
99 { client->addr, 0, 2, dt_addr }, /* setup read ptr */
100 { client->addr, I2C_M_RD, 8, buf }, /* read date */
103 /* read date registers */
104 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
105 dev_err(&client->dev, "%s: read error\n", __func__);
106 return -EIO;
109 dev_dbg(&client->dev,
110 "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
111 "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
112 __func__,
113 buf[0], buf[1], buf[2], buf[3],
114 buf[4], buf[5], buf[6], buf[7]);
116 /* Mask out the enable bits if these are alarm registers */
117 if (reg_base < X1205_CCR_BASE)
118 for (i = 0; i <= 4; i++)
119 buf[i] &= 0x7F;
121 tm->tm_sec = bcd2bin(buf[CCR_SEC]);
122 tm->tm_min = bcd2bin(buf[CCR_MIN]);
123 tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
124 tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
125 tm->tm_mon = bcd2bin(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
126 tm->tm_year = bcd2bin(buf[CCR_YEAR])
127 + (bcd2bin(buf[CCR_Y2K]) * 100) - 1900;
128 tm->tm_wday = buf[CCR_WDAY];
130 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
131 "mday=%d, mon=%d, year=%d, wday=%d\n",
132 __func__,
133 tm->tm_sec, tm->tm_min, tm->tm_hour,
134 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
136 return 0;
139 static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
141 static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
143 struct i2c_msg msgs[] = {
144 { client->addr, 0, 2, sr_addr }, /* setup read ptr */
145 { client->addr, I2C_M_RD, 1, sr }, /* read status */
148 /* read status register */
149 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
150 dev_err(&client->dev, "%s: read error\n", __func__);
151 return -EIO;
154 return 0;
157 static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
158 u8 reg_base, unsigned char alm_enable)
160 int i, xfer;
161 unsigned char rdata[10] = { 0, reg_base };
162 unsigned char *buf = rdata + 2;
164 static const unsigned char wel[3] = { 0, X1205_REG_SR,
165 X1205_SR_WEL };
167 static const unsigned char rwel[3] = { 0, X1205_REG_SR,
168 X1205_SR_WEL | X1205_SR_RWEL };
170 static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
172 dev_dbg(&client->dev,
173 "%s: sec=%d min=%d hour=%d mday=%d mon=%d year=%d wday=%d\n",
174 __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday,
175 tm->tm_mon, tm->tm_year, tm->tm_wday);
177 buf[CCR_SEC] = bin2bcd(tm->tm_sec);
178 buf[CCR_MIN] = bin2bcd(tm->tm_min);
180 /* set hour and 24hr bit */
181 buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
183 buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
185 /* month, 1 - 12 */
186 buf[CCR_MONTH] = bin2bcd(tm->tm_mon + 1);
188 /* year, since the rtc epoch*/
189 buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
190 buf[CCR_WDAY] = tm->tm_wday & 0x07;
191 buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100);
193 /* If writing alarm registers, set compare bits on registers 0-4 */
194 if (reg_base < X1205_CCR_BASE)
195 for (i = 0; i <= 4; i++)
196 buf[i] |= 0x80;
198 /* this sequence is required to unlock the chip */
199 if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
200 dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
201 return -EIO;
204 if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
205 dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
206 return -EIO;
209 xfer = i2c_master_send(client, rdata, sizeof(rdata));
210 if (xfer != sizeof(rdata)) {
211 dev_err(&client->dev,
212 "%s: result=%d addr=%02x, data=%02x\n",
213 __func__,
214 xfer, rdata[1], rdata[2]);
215 return -EIO;
218 /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
219 if (reg_base < X1205_CCR_BASE) {
220 unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
222 msleep(10);
224 /* ...and set or clear the AL0E bit in the INT register */
226 /* Need to set RWEL again as the write has cleared it */
227 xfer = i2c_master_send(client, rwel, 3);
228 if (xfer != 3) {
229 dev_err(&client->dev,
230 "%s: aloe rwel - %d\n",
231 __func__,
232 xfer);
233 return -EIO;
236 if (alm_enable)
237 al0e[2] = X1205_INT_AL0E;
239 xfer = i2c_master_send(client, al0e, 3);
240 if (xfer != 3) {
241 dev_err(&client->dev,
242 "%s: al0e - %d\n",
243 __func__,
244 xfer);
245 return -EIO;
248 /* and wait 10msec again for this write to complete */
249 msleep(10);
252 /* disable further writes */
253 if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
254 dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
255 return -EIO;
258 return 0;
261 static int x1205_fix_osc(struct i2c_client *client)
263 int err;
264 struct rtc_time tm;
266 memset(&tm, 0, sizeof(tm));
268 err = x1205_set_datetime(client, &tm, X1205_CCR_BASE, 0);
269 if (err < 0)
270 dev_err(&client->dev, "unable to restart the oscillator\n");
272 return err;
275 static int x1205_get_dtrim(struct i2c_client *client, int *trim)
277 unsigned char dtr;
278 static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
280 struct i2c_msg msgs[] = {
281 { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
282 { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
285 /* read dtr register */
286 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
287 dev_err(&client->dev, "%s: read error\n", __func__);
288 return -EIO;
291 dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
293 *trim = 0;
295 if (dtr & X1205_DTR_DTR0)
296 *trim += 20;
298 if (dtr & X1205_DTR_DTR1)
299 *trim += 10;
301 if (dtr & X1205_DTR_DTR2)
302 *trim = -*trim;
304 return 0;
307 static int x1205_get_atrim(struct i2c_client *client, int *trim)
309 s8 atr;
310 static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
312 struct i2c_msg msgs[] = {
313 { client->addr, 0, 2, atr_addr }, /* setup read ptr */
314 { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
317 /* read atr register */
318 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
319 dev_err(&client->dev, "%s: read error\n", __func__);
320 return -EIO;
323 dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
325 /* atr is a two's complement value on 6 bits,
326 * perform sign extension. The formula is
327 * Catr = (atr * 0.25pF) + 11.00pF.
329 if (atr & 0x20)
330 atr |= 0xC0;
332 dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
334 *trim = (atr * 250) + 11000;
336 dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
338 return 0;
341 struct x1205_limit
343 unsigned char reg, mask, min, max;
346 static int x1205_validate_client(struct i2c_client *client)
348 int i, xfer;
350 /* Probe array. We will read the register at the specified
351 * address and check if the given bits are zero.
353 static const unsigned char probe_zero_pattern[] = {
354 /* register, mask */
355 X1205_REG_SR, 0x18,
356 X1205_REG_DTR, 0xF8,
357 X1205_REG_ATR, 0xC0,
358 X1205_REG_INT, 0x18,
359 X1205_REG_0, 0xFF,
362 static const struct x1205_limit probe_limits_pattern[] = {
363 /* register, mask, min, max */
364 { X1205_REG_Y2K, 0xFF, 19, 20 },
365 { X1205_REG_DW, 0xFF, 0, 6 },
366 { X1205_REG_YR, 0xFF, 0, 99 },
367 { X1205_REG_MO, 0xFF, 0, 12 },
368 { X1205_REG_DT, 0xFF, 0, 31 },
369 { X1205_REG_HR, 0x7F, 0, 23 },
370 { X1205_REG_MN, 0xFF, 0, 59 },
371 { X1205_REG_SC, 0xFF, 0, 59 },
372 { X1205_REG_Y2K1, 0xFF, 19, 20 },
373 { X1205_REG_Y2K0, 0xFF, 19, 20 },
376 /* check that registers have bits a 0 where expected */
377 for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
378 unsigned char buf;
380 unsigned char addr[2] = { 0, probe_zero_pattern[i] };
382 struct i2c_msg msgs[2] = {
383 { client->addr, 0, 2, addr },
384 { client->addr, I2C_M_RD, 1, &buf },
387 if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
388 dev_err(&client->dev,
389 "%s: could not read register %x\n",
390 __func__, probe_zero_pattern[i]);
392 return -EIO;
395 if ((buf & probe_zero_pattern[i+1]) != 0) {
396 dev_err(&client->dev,
397 "%s: register=%02x, zero pattern=%d, value=%x\n",
398 __func__, probe_zero_pattern[i], i, buf);
400 return -ENODEV;
404 /* check limits (only registers with bcd values) */
405 for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
406 unsigned char reg, value;
408 unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
410 struct i2c_msg msgs[2] = {
411 { client->addr, 0, 2, addr },
412 { client->addr, I2C_M_RD, 1, &reg },
415 if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
416 dev_err(&client->dev,
417 "%s: could not read register %x\n",
418 __func__, probe_limits_pattern[i].reg);
420 return -EIO;
423 value = bcd2bin(reg & probe_limits_pattern[i].mask);
425 if (value > probe_limits_pattern[i].max ||
426 value < probe_limits_pattern[i].min) {
427 dev_dbg(&client->dev,
428 "%s: register=%x, lim pattern=%d, value=%d\n",
429 __func__, probe_limits_pattern[i].reg,
430 i, value);
432 return -ENODEV;
436 return 0;
439 static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
441 int err;
442 unsigned char intreg, status;
443 static unsigned char int_addr[2] = { 0, X1205_REG_INT };
444 struct i2c_client *client = to_i2c_client(dev);
445 struct i2c_msg msgs[] = {
446 { client->addr, 0, 2, int_addr }, /* setup read ptr */
447 { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */
450 /* read interrupt register and status register */
451 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
452 dev_err(&client->dev, "%s: read error\n", __func__);
453 return -EIO;
455 err = x1205_get_status(client, &status);
456 if (err == 0) {
457 alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
458 alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
459 err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
461 return err;
464 static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
466 return x1205_set_datetime(to_i2c_client(dev),
467 &alrm->time, X1205_ALM0_BASE, alrm->enabled);
470 static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
472 return x1205_get_datetime(to_i2c_client(dev),
473 tm, X1205_CCR_BASE);
476 static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
478 return x1205_set_datetime(to_i2c_client(dev),
479 tm, X1205_CCR_BASE, 0);
482 static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
484 int err, dtrim, atrim;
486 if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
487 seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
489 if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0)
490 seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
491 atrim / 1000, atrim % 1000);
492 return 0;
495 static const struct rtc_class_ops x1205_rtc_ops = {
496 .proc = x1205_rtc_proc,
497 .read_time = x1205_rtc_read_time,
498 .set_time = x1205_rtc_set_time,
499 .read_alarm = x1205_rtc_read_alarm,
500 .set_alarm = x1205_rtc_set_alarm,
503 static ssize_t x1205_sysfs_show_atrim(struct device *dev,
504 struct device_attribute *attr, char *buf)
506 int err, atrim;
508 err = x1205_get_atrim(to_i2c_client(dev), &atrim);
509 if (err)
510 return err;
512 return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
514 static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
516 static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
517 struct device_attribute *attr, char *buf)
519 int err, dtrim;
521 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
522 if (err)
523 return err;
525 return sprintf(buf, "%d ppm\n", dtrim);
527 static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
529 static int x1205_sysfs_register(struct device *dev)
531 int err;
533 err = device_create_file(dev, &dev_attr_atrim);
534 if (err)
535 return err;
537 err = device_create_file(dev, &dev_attr_dtrim);
538 if (err)
539 device_remove_file(dev, &dev_attr_atrim);
541 return err;
544 static void x1205_sysfs_unregister(struct device *dev)
546 device_remove_file(dev, &dev_attr_atrim);
547 device_remove_file(dev, &dev_attr_dtrim);
551 static int x1205_probe(struct i2c_client *client,
552 const struct i2c_device_id *id)
554 int err = 0;
555 unsigned char sr;
556 struct rtc_device *rtc;
558 dev_dbg(&client->dev, "%s\n", __func__);
560 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
561 return -ENODEV;
563 if (x1205_validate_client(client) < 0)
564 return -ENODEV;
566 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
568 rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
569 &x1205_rtc_ops, THIS_MODULE);
571 if (IS_ERR(rtc))
572 return PTR_ERR(rtc);
574 i2c_set_clientdata(client, rtc);
576 /* Check for power failures and eventualy enable the osc */
577 if ((err = x1205_get_status(client, &sr)) == 0) {
578 if (sr & X1205_SR_RTCF) {
579 dev_err(&client->dev,
580 "power failure detected, "
581 "please set the clock\n");
582 udelay(50);
583 x1205_fix_osc(client);
586 else
587 dev_err(&client->dev, "couldn't read status\n");
589 err = x1205_sysfs_register(&client->dev);
590 if (err)
591 goto exit_devreg;
593 return 0;
595 exit_devreg:
596 rtc_device_unregister(rtc);
598 return err;
601 static int x1205_remove(struct i2c_client *client)
603 struct rtc_device *rtc = i2c_get_clientdata(client);
605 rtc_device_unregister(rtc);
606 x1205_sysfs_unregister(&client->dev);
607 return 0;
610 static const struct i2c_device_id x1205_id[] = {
611 { "x1205", 0 },
614 MODULE_DEVICE_TABLE(i2c, x1205_id);
616 static struct i2c_driver x1205_driver = {
617 .driver = {
618 .name = "rtc-x1205",
620 .probe = x1205_probe,
621 .remove = x1205_remove,
622 .id_table = x1205_id,
625 static int __init x1205_init(void)
627 return i2c_add_driver(&x1205_driver);
630 static void __exit x1205_exit(void)
632 i2c_del_driver(&x1205_driver);
635 MODULE_AUTHOR(
636 "Karen Spearel <kas111 at gmail dot com>, "
637 "Alessandro Zummo <a.zummo@towertech.it>");
638 MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
639 MODULE_LICENSE("GPL");
640 MODULE_VERSION(DRV_VERSION);
642 module_init(x1205_init);
643 module_exit(x1205_exit);