1 /******************************************************************************
2 * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
3 * Linux device driver for RTL8192E
5 * Based on the r8180 driver, which is:
6 * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * You should have received a copy of the GNU General Public License along with
17 * this program; if not, write to the Free Software Foundation, Inc.,
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20 * The full GNU General Public License is included in this distribution in the
21 * file called LICENSE.
23 * Contact Information:
24 * Jerry chuang <wlanfae@realtek.com>
28 #include <linux/vmalloc.h>
29 #include <linux/slab.h>
30 #include <asm/uaccess.h>
31 #include "r8192E_hw.h"
33 #include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
34 #include "r8180_93cx6.h" /* Card EEPROM */
35 #include "r8192E_wx.h"
36 #include "r819xE_phy.h" //added by WB 4.30.2008
37 #include "r819xE_phyreg.h"
38 #include "r819xE_cmdpkt.h"
39 #include "r8192E_dm.h"
46 #include "ieee80211/dot11d.h"
49 //set here to open your trace code. //WB
50 u32 rt_global_debug_component
= COMP_ERR
; //always open err flags on
52 static DEFINE_PCI_DEVICE_TABLE(rtl8192_pci_id_tbl
) = {
54 { PCI_DEVICE(0x10ec, 0x8192) },
57 { PCI_DEVICE(0x07aa, 0x0044) },
58 { PCI_DEVICE(0x07aa, 0x0047) },
62 static char ifname
[IFNAMSIZ
] = "wlan%d";
63 static int hwwep
= 1; //default use hw. set 0 to use software security
64 static int channels
= 0x3fff;
66 MODULE_LICENSE("GPL");
67 MODULE_VERSION("V 1.1");
68 MODULE_DEVICE_TABLE(pci
, rtl8192_pci_id_tbl
);
69 //MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
70 MODULE_DESCRIPTION("Linux driver for Realtek RTL819x WiFi cards");
73 module_param_string(ifname
, ifname
, sizeof(ifname
), S_IRUGO
|S_IWUSR
);
74 module_param(hwwep
,int, S_IRUGO
|S_IWUSR
);
75 module_param(channels
,int, S_IRUGO
|S_IWUSR
);
77 MODULE_PARM_DESC(ifname
," Net interface name, wlan%d=default");
78 MODULE_PARM_DESC(hwwep
," Try to use hardware WEP support. Still broken and not available on all cards");
79 MODULE_PARM_DESC(channels
," Channel bitmask for specific locales. NYI");
81 static int __devinit
rtl8192_pci_probe(struct pci_dev
*pdev
,
82 const struct pci_device_id
*id
);
83 static void __devexit
rtl8192_pci_disconnect(struct pci_dev
*pdev
);
85 static struct pci_driver rtl8192_pci_driver
= {
86 .name
= RTL819xE_MODULE_NAME
, /* Driver name */
87 .id_table
= rtl8192_pci_id_tbl
, /* PCI_ID table */
88 .probe
= rtl8192_pci_probe
, /* probe fn */
89 .remove
= __devexit_p(rtl8192_pci_disconnect
), /* remove fn */
91 .suspend
= rtl8192E_suspend
, /* PM suspend fn */
92 .resume
= rtl8192E_resume
, /* PM resume fn */
94 .suspend
= NULL
, /* PM suspend fn */
95 .resume
= NULL
, /* PM resume fn */
99 static void rtl8192_start_beacon(struct ieee80211_device
*ieee80211
);
100 static void rtl8192_stop_beacon(struct ieee80211_device
*ieee80211
);
101 static void rtl819x_watchdog_wqcallback(struct work_struct
*work
);
102 static void rtl8192_irq_rx_tasklet(unsigned long arg
);
103 static void rtl8192_irq_tx_tasklet(unsigned long arg
);
104 static void rtl8192_prepare_beacon(unsigned long arg
);
105 static irqreturn_t
rtl8192_interrupt(int irq
, void *netdev
);
106 static void rtl819xE_tx_cmd(struct r8192_priv
*priv
, struct sk_buff
*skb
);
107 static void rtl8192_update_ratr_table(struct r8192_priv
*priv
);
108 static void rtl8192_restart(struct work_struct
*work
);
109 static void watch_dog_timer_callback(unsigned long data
);
110 static int _rtl8192_up(struct r8192_priv
*priv
);
111 static void rtl8192_cancel_deferred_work(struct r8192_priv
* priv
);
112 static short rtl8192_tx(struct r8192_priv
*priv
, struct sk_buff
* skb
);
116 typedef struct _CHANNEL_LIST
120 }CHANNEL_LIST
, *PCHANNEL_LIST
;
122 static const CHANNEL_LIST ChannelPlan
[] = {
123 {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24}, //FCC
124 {{1,2,3,4,5,6,7,8,9,10,11},11}, //IC
125 {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21}, //ETSI
126 {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //Spain. Change to ETSI.
127 {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //France. Change to ETSI.
128 {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22}, //MKK //MKK
129 {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},//MKK1
130 {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //Israel.
131 {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22}, // For 11a , TELEC
132 {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64}, 22}, //MIC
133 {{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14} //For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626
136 static void rtl819x_set_channel_map(u8 channel_plan
, struct r8192_priv
* priv
)
138 int i
, max_chan
=-1, min_chan
=-1;
139 struct ieee80211_device
* ieee
= priv
->ieee80211
;
140 switch (channel_plan
)
142 case COUNTRY_CODE_FCC
:
143 case COUNTRY_CODE_IC
:
144 case COUNTRY_CODE_ETSI
:
145 case COUNTRY_CODE_SPAIN
:
146 case COUNTRY_CODE_FRANCE
:
147 case COUNTRY_CODE_MKK
:
148 case COUNTRY_CODE_MKK1
:
149 case COUNTRY_CODE_ISRAEL
:
150 case COUNTRY_CODE_TELEC
:
151 case COUNTRY_CODE_MIC
:
154 ieee
->bGlobalDomain
= false;
155 //acturally 8225 & 8256 rf chip only support B,G,24N mode
159 if (ChannelPlan
[channel_plan
].Len
!= 0){
160 // Clear old channel map
161 memset(GET_DOT11D_INFO(ieee
)->channel_map
, 0, sizeof(GET_DOT11D_INFO(ieee
)->channel_map
));
162 // Set new channel map
163 for (i
=0;i
<ChannelPlan
[channel_plan
].Len
;i
++)
165 if (ChannelPlan
[channel_plan
].Channel
[i
] < min_chan
|| ChannelPlan
[channel_plan
].Channel
[i
] > max_chan
)
167 GET_DOT11D_INFO(ieee
)->channel_map
[ChannelPlan
[channel_plan
].Channel
[i
]] = 1;
172 case COUNTRY_CODE_GLOBAL_DOMAIN
:
174 GET_DOT11D_INFO(ieee
)->bEnabled
= 0; //this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain setting
176 ieee
->bGlobalDomain
= true;
185 static inline bool rx_hal_is_cck_rate(prx_fwinfo_819x_pci pdrvinfo
)
187 return (pdrvinfo
->RxRate
== DESC90_RATE1M
||
188 pdrvinfo
->RxRate
== DESC90_RATE2M
||
189 pdrvinfo
->RxRate
== DESC90_RATE5_5M
||
190 pdrvinfo
->RxRate
== DESC90_RATE11M
) &&
194 void CamResetAllEntry(struct r8192_priv
* priv
)
196 write_nic_dword(priv
, RWCAM
, BIT31
|BIT30
);
199 void write_cam(struct r8192_priv
*priv
, u8 addr
, u32 data
)
201 write_nic_dword(priv
, WCAMI
, data
);
202 write_nic_dword(priv
, RWCAM
, BIT31
|BIT16
|(addr
&0xff) );
205 u32
read_cam(struct r8192_priv
*priv
, u8 addr
)
207 write_nic_dword(priv
, RWCAM
, 0x80000000|(addr
&0xff) );
208 return read_nic_dword(priv
, 0xa8);
211 u8
read_nic_byte(struct r8192_priv
*priv
, int x
)
213 return 0xff & readb(priv
->mem_start
+ x
);
216 u32
read_nic_dword(struct r8192_priv
*priv
, int x
)
218 return readl(priv
->mem_start
+ x
);
221 u16
read_nic_word(struct r8192_priv
*priv
, int x
)
223 return readw(priv
->mem_start
+ x
);
226 void write_nic_byte(struct r8192_priv
*priv
, int x
,u8 y
)
228 writeb(y
, priv
->mem_start
+ x
);
232 void write_nic_dword(struct r8192_priv
*priv
, int x
,u32 y
)
234 writel(y
, priv
->mem_start
+ x
);
238 void write_nic_word(struct r8192_priv
*priv
, int x
,u16 y
)
240 writew(y
, priv
->mem_start
+ x
);
244 u8
rtl8192e_ap_sec_type(struct ieee80211_device
*ieee
)
246 static const u8 ccmp_ie
[4] = {0x00,0x50,0xf2,0x04};
247 static const u8 ccmp_rsn_ie
[4] = {0x00, 0x0f, 0xac, 0x04};
248 int wpa_ie_len
= ieee
->wpa_ie_len
;
249 struct ieee80211_crypt_data
* crypt
;
252 crypt
= ieee
->crypt
[ieee
->tx_keyidx
];
254 encrypt
= (ieee
->current_network
.capability
& WLAN_CAPABILITY_PRIVACY
) ||
255 (ieee
->host_encrypt
&& crypt
&& crypt
->ops
&&
256 (0 == strcmp(crypt
->ops
->name
,"WEP")));
259 if(encrypt
&& (wpa_ie_len
== 0)) {
260 // wep encryption, no N mode setting */
262 } else if((wpa_ie_len
!= 0)) {
263 // parse pairwise key type */
264 if (((ieee
->wpa_ie
[0] == 0xdd) && (!memcmp(&(ieee
->wpa_ie
[14]),ccmp_ie
,4))) ||
265 ((ieee
->wpa_ie
[0] == 0x30) && (!memcmp(&ieee
->wpa_ie
[10],ccmp_rsn_ie
, 4))))
274 void rtl8192e_SetHwReg(struct ieee80211_device
*ieee80211
, u8 variable
, u8
*val
)
276 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
282 write_nic_dword(priv
, BSSIDR
, ((u32
*)(val
))[0]);
283 write_nic_word(priv
, BSSIDR
+2, ((u16
*)(val
+2))[0]);
286 case HW_VAR_MEDIA_STATUS
:
288 RT_OP_MODE OpMode
= *((RT_OP_MODE
*)(val
));
289 u8 btMsr
= read_nic_byte(priv
, MSR
);
295 case RT_OP_MODE_INFRASTRUCTURE
:
299 case RT_OP_MODE_IBSS
:
312 write_nic_byte(priv
, MSR
, btMsr
);
316 case HW_VAR_CHECK_BSSID
:
320 Type
= ((u8
*)(val
))[0];
321 RegRCR
= read_nic_dword(priv
, RCR
);
322 priv
->ReceiveConfig
= RegRCR
;
325 RegRCR
|= (RCR_CBSSID
);
326 else if (Type
== false)
327 RegRCR
&= (~RCR_CBSSID
);
329 write_nic_dword(priv
, RCR
,RegRCR
);
330 priv
->ReceiveConfig
= RegRCR
;
335 case HW_VAR_SLOT_TIME
:
337 priv
->slot_time
= val
[0];
338 write_nic_byte(priv
, SLOT_TIME
, val
[0]);
343 case HW_VAR_ACK_PREAMBLE
:
346 priv
->short_preamble
= (bool)(*(u8
*)val
);
347 regTmp
= priv
->basic_rate
;
348 if (priv
->short_preamble
)
349 regTmp
|= BRSR_AckShortPmb
;
350 write_nic_dword(priv
, RRSR
, regTmp
);
355 write_nic_dword(priv
, CPU_GEN
, ((u32
*)(val
))[0]);
364 static struct proc_dir_entry
*rtl8192_proc
= NULL
;
366 static int proc_get_stats_ap(char *page
, char **start
,
367 off_t offset
, int count
,
368 int *eof
, void *data
)
370 struct r8192_priv
*priv
= data
;
371 struct ieee80211_device
*ieee
= priv
->ieee80211
;
372 struct ieee80211_network
*target
;
375 list_for_each_entry(target
, &ieee
->network_list
, list
) {
377 len
+= snprintf(page
+ len
, count
- len
,
378 "%s ", target
->ssid
);
380 if(target
->wpa_ie_len
>0 || target
->rsn_ie_len
>0){
381 len
+= snprintf(page
+ len
, count
- len
,
385 len
+= snprintf(page
+ len
, count
- len
,
395 static int proc_get_registers(char *page
, char **start
,
396 off_t offset
, int count
,
397 int *eof
, void *data
)
399 struct r8192_priv
*priv
= data
;
404 /* This dump the current register page */
405 len
+= snprintf(page
+ len
, count
- len
,
406 "\n####################page 0##################\n ");
410 len
+= snprintf(page
+ len
, count
- len
,
413 for(i
=0;i
<16 && n
<=max
;i
++,n
++)
414 len
+= snprintf(page
+ len
, count
- len
,
415 "%2x ",read_nic_byte(priv
,n
));
417 len
+= snprintf(page
+ len
, count
- len
,"\n");
418 len
+= snprintf(page
+ len
, count
- len
,
419 "\n####################page 1##################\n ");
422 len
+= snprintf(page
+ len
, count
- len
,
425 for(i
=0;i
<16 && n
<=max
;i
++,n
++)
426 len
+= snprintf(page
+ len
, count
- len
,
427 "%2x ",read_nic_byte(priv
,0x100|n
));
430 len
+= snprintf(page
+ len
, count
- len
,
431 "\n####################page 3##################\n ");
434 len
+= snprintf(page
+ len
, count
- len
,
437 for(i
=0;i
<16 && n
<=max
;i
++,n
++)
438 len
+= snprintf(page
+ len
, count
- len
,
439 "%2x ",read_nic_byte(priv
,0x300|n
));
447 static int proc_get_stats_tx(char *page
, char **start
,
448 off_t offset
, int count
,
449 int *eof
, void *data
)
451 struct r8192_priv
*priv
= data
;
455 len
+= snprintf(page
+ len
, count
- len
,
456 "TX VI priority ok int: %lu\n"
457 "TX VO priority ok int: %lu\n"
458 "TX BE priority ok int: %lu\n"
459 "TX BK priority ok int: %lu\n"
460 "TX MANAGE priority ok int: %lu\n"
461 "TX BEACON priority ok int: %lu\n"
462 "TX BEACON priority error int: %lu\n"
463 "TX CMDPKT priority ok int: %lu\n"
464 "TX queue stopped?: %d\n"
465 "TX fifo overflow: %lu\n"
466 "TX total data packets %lu\n"
467 "TX total data bytes :%lu\n",
468 priv
->stats
.txviokint
,
469 priv
->stats
.txvookint
,
470 priv
->stats
.txbeokint
,
471 priv
->stats
.txbkokint
,
472 priv
->stats
.txmanageokint
,
473 priv
->stats
.txbeaconokint
,
474 priv
->stats
.txbeaconerr
,
475 priv
->stats
.txcmdpktokint
,
476 netif_queue_stopped(priv
->ieee80211
->dev
),
477 priv
->stats
.txoverflow
,
478 priv
->ieee80211
->stats
.tx_packets
,
479 priv
->ieee80211
->stats
.tx_bytes
);
487 static int proc_get_stats_rx(char *page
, char **start
,
488 off_t offset
, int count
,
489 int *eof
, void *data
)
491 struct r8192_priv
*priv
= data
;
494 len
+= snprintf(page
+ len
, count
- len
,
497 "RX rx overflow error: %lu\n",
500 priv
->stats
.rxoverflow
);
506 static void rtl8192_proc_module_init(void)
508 RT_TRACE(COMP_INIT
, "Initializing proc filesystem\n");
509 rtl8192_proc
=create_proc_entry(RTL819xE_MODULE_NAME
, S_IFDIR
, init_net
.proc_net
);
513 static void rtl8192_proc_module_remove(void)
515 remove_proc_entry(RTL819xE_MODULE_NAME
, init_net
.proc_net
);
519 static void rtl8192_proc_remove_one(struct r8192_priv
*priv
)
521 struct net_device
*dev
= priv
->ieee80211
->dev
;
523 printk("dev name=======> %s\n",dev
->name
);
526 remove_proc_entry("stats-tx", priv
->dir_dev
);
527 remove_proc_entry("stats-rx", priv
->dir_dev
);
528 remove_proc_entry("stats-ap", priv
->dir_dev
);
529 remove_proc_entry("registers", priv
->dir_dev
);
530 remove_proc_entry("wlan0", rtl8192_proc
);
531 priv
->dir_dev
= NULL
;
536 static void rtl8192_proc_init_one(struct r8192_priv
*priv
)
538 struct net_device
*dev
= priv
->ieee80211
->dev
;
539 struct proc_dir_entry
*e
;
541 priv
->dir_dev
= create_proc_entry(dev
->name
,
542 S_IFDIR
| S_IRUGO
| S_IXUGO
,
544 if (!priv
->dir_dev
) {
545 RT_TRACE(COMP_ERR
, "Unable to initialize /proc/net/rtl8192/%s\n",
549 e
= create_proc_read_entry("stats-rx", S_IFREG
| S_IRUGO
,
550 priv
->dir_dev
, proc_get_stats_rx
, priv
);
553 RT_TRACE(COMP_ERR
,"Unable to initialize "
554 "/proc/net/rtl8192/%s/stats-rx\n",
559 e
= create_proc_read_entry("stats-tx", S_IFREG
| S_IRUGO
,
560 priv
->dir_dev
, proc_get_stats_tx
, priv
);
563 RT_TRACE(COMP_ERR
, "Unable to initialize "
564 "/proc/net/rtl8192/%s/stats-tx\n",
568 e
= create_proc_read_entry("stats-ap", S_IFREG
| S_IRUGO
,
569 priv
->dir_dev
, proc_get_stats_ap
, priv
);
572 RT_TRACE(COMP_ERR
, "Unable to initialize "
573 "/proc/net/rtl8192/%s/stats-ap\n",
577 e
= create_proc_read_entry("registers", S_IFREG
| S_IRUGO
,
578 priv
->dir_dev
, proc_get_registers
, priv
);
580 RT_TRACE(COMP_ERR
, "Unable to initialize "
581 "/proc/net/rtl8192/%s/registers\n",
586 static short check_nic_enough_desc(struct net_device
*dev
, int prio
)
588 struct r8192_priv
*priv
= ieee80211_priv(dev
);
589 struct rtl8192_tx_ring
*ring
= &priv
->tx_ring
[prio
];
591 /* for now we reserve two free descriptor as a safety boundary
592 * between the tail and the head
594 return (ring
->entries
- skb_queue_len(&ring
->queue
) >= 2);
597 static void tx_timeout(struct net_device
*dev
)
599 struct r8192_priv
*priv
= ieee80211_priv(dev
);
601 schedule_work(&priv
->reset_wq
);
605 static void rtl8192_irq_enable(struct r8192_priv
*priv
)
609 mask
= IMR_ROK
| IMR_VODOK
| IMR_VIDOK
| IMR_BEDOK
| IMR_BKDOK
|
610 IMR_HCCADOK
| IMR_MGNTDOK
| IMR_COMDOK
| IMR_HIGHDOK
|
611 IMR_BDOK
| IMR_RXCMDOK
| IMR_TIMEOUT0
| IMR_RDU
| IMR_RXFOVW
|
612 IMR_TXFOVW
| IMR_BcnInt
| IMR_TBDOK
| IMR_TBDER
;
614 write_nic_dword(priv
, INTA_MASK
, mask
);
617 static void rtl8192_irq_disable(struct r8192_priv
*priv
)
619 write_nic_dword(priv
, INTA_MASK
, 0);
620 synchronize_irq(priv
->irq
);
623 static void rtl8192_update_msr(struct r8192_priv
*priv
)
627 msr
= read_nic_byte(priv
, MSR
);
628 msr
&= ~ MSR_LINK_MASK
;
630 /* do not change in link_state != WLAN_LINK_ASSOCIATED.
631 * msr must be updated if the state is ASSOCIATING.
632 * this is intentional and make sense for ad-hoc and
633 * master (see the create BSS/IBSS func)
635 if (priv
->ieee80211
->state
== IEEE80211_LINKED
){
637 if (priv
->ieee80211
->iw_mode
== IW_MODE_INFRA
)
638 msr
|= (MSR_LINK_MANAGED
<<MSR_LINK_SHIFT
);
639 else if (priv
->ieee80211
->iw_mode
== IW_MODE_ADHOC
)
640 msr
|= (MSR_LINK_ADHOC
<<MSR_LINK_SHIFT
);
641 else if (priv
->ieee80211
->iw_mode
== IW_MODE_MASTER
)
642 msr
|= (MSR_LINK_MASTER
<<MSR_LINK_SHIFT
);
645 msr
|= (MSR_LINK_NONE
<<MSR_LINK_SHIFT
);
647 write_nic_byte(priv
, MSR
, msr
);
650 static void rtl8192_set_chan(struct ieee80211_device
*ieee80211
, short ch
)
652 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
656 /* need to implement rf set channel here WB */
658 if (priv
->rf_set_chan
)
659 priv
->rf_set_chan(ieee80211
, priv
->chan
);
662 static void rtl8192_rx_enable(struct r8192_priv
*priv
)
664 write_nic_dword(priv
, RDQDA
, priv
->rx_ring_dma
);
667 /* the TX_DESC_BASE setting is according to the following queue index
676 * BEACON_QUEUE ===> 8
678 static const u32 TX_DESC_BASE
[] = {BKQDA
, BEQDA
, VIQDA
, VOQDA
, HCCAQDA
, CQDA
, MQDA
, HQDA
, BQDA
};
679 static void rtl8192_tx_enable(struct r8192_priv
*priv
)
683 for (i
= 0; i
< MAX_TX_QUEUE_COUNT
; i
++)
684 write_nic_dword(priv
, TX_DESC_BASE
[i
], priv
->tx_ring
[i
].dma
);
686 ieee80211_reset_queue(priv
->ieee80211
);
690 static void rtl8192_free_rx_ring(struct r8192_priv
*priv
)
694 for (i
= 0; i
< priv
->rxringcount
; i
++) {
695 struct sk_buff
*skb
= priv
->rx_buf
[i
];
699 pci_unmap_single(priv
->pdev
,
700 *((dma_addr_t
*)skb
->cb
),
701 priv
->rxbuffersize
, PCI_DMA_FROMDEVICE
);
705 pci_free_consistent(priv
->pdev
, sizeof(*priv
->rx_ring
) * priv
->rxringcount
,
706 priv
->rx_ring
, priv
->rx_ring_dma
);
707 priv
->rx_ring
= NULL
;
710 static void rtl8192_free_tx_ring(struct r8192_priv
*priv
, unsigned int prio
)
712 struct rtl8192_tx_ring
*ring
= &priv
->tx_ring
[prio
];
714 while (skb_queue_len(&ring
->queue
)) {
715 tx_desc_819x_pci
*entry
= &ring
->desc
[ring
->idx
];
716 struct sk_buff
*skb
= __skb_dequeue(&ring
->queue
);
718 pci_unmap_single(priv
->pdev
, le32_to_cpu(entry
->TxBuffAddr
),
719 skb
->len
, PCI_DMA_TODEVICE
);
721 ring
->idx
= (ring
->idx
+ 1) % ring
->entries
;
724 pci_free_consistent(priv
->pdev
, sizeof(*ring
->desc
)*ring
->entries
,
725 ring
->desc
, ring
->dma
);
729 void PHY_SetRtl8192eRfOff(struct r8192_priv
*priv
)
731 //disable RF-Chip A/B
732 rtl8192_setBBreg(priv
, rFPGA0_XA_RFInterfaceOE
, BIT4
, 0x0);
733 //analog to digital off, for power save
734 rtl8192_setBBreg(priv
, rFPGA0_AnalogParameter4
, 0x300, 0x0);
735 //digital to analog off, for power save
736 rtl8192_setBBreg(priv
, rFPGA0_AnalogParameter1
, 0x18, 0x0);
738 rtl8192_setBBreg(priv
, rOFDM0_TRxPathEnable
, 0xf, 0x0);
740 rtl8192_setBBreg(priv
, rOFDM1_TRxPathEnable
, 0xf, 0x0);
741 //analog to digital part2 off, for power save
742 rtl8192_setBBreg(priv
, rFPGA0_AnalogParameter1
, 0x60, 0x0);
743 rtl8192_setBBreg(priv
, rFPGA0_AnalogParameter1
, 0x4, 0x0);
744 // Analog parameter!!Change bias and Lbus control.
745 write_nic_byte(priv
, ANAPAR_FOR_8192PciE
, 0x07);
748 static void rtl8192_halt_adapter(struct r8192_priv
*priv
, bool reset
)
754 OpMode
= RT_OP_MODE_NO_LINK
;
755 priv
->ieee80211
->SetHwRegHandler(priv
->ieee80211
, HW_VAR_MEDIA_STATUS
, &OpMode
);
757 if (!priv
->ieee80211
->bSupportRemoteWakeUp
) {
759 * disable tx/rx. In 8185 we write 0x10 (Reset bit),
760 * but here we make reference to WMAC and wirte 0x0
762 write_nic_byte(priv
, CMDR
, 0);
770 priv
->bHwRfOffAction
= 2;
773 * Call MgntActSet_RF_State instead to
774 * prevent RF config race condition.
776 if (!priv
->ieee80211
->bSupportRemoteWakeUp
) {
777 PHY_SetRtl8192eRfOff(priv
);
778 ulRegRead
= read_nic_dword(priv
, CPU_GEN
);
779 ulRegRead
|= CPU_GEN_SYSTEM_RESET
;
780 write_nic_dword(priv
,CPU_GEN
, ulRegRead
);
783 write_nic_dword(priv
, WFCRC0
, 0xffffffff);
784 write_nic_dword(priv
, WFCRC1
, 0xffffffff);
785 write_nic_dword(priv
, WFCRC2
, 0xffffffff);
787 /* Write PMR register */
788 write_nic_byte(priv
, PMR
, 0x5);
789 /* Disable tx, enanble rx */
790 write_nic_byte(priv
, MacBlkCtrl
, 0xa);
794 for(i
= 0; i
< MAX_QUEUE_SIZE
; i
++) {
795 skb_queue_purge(&priv
->ieee80211
->skb_waitQ
[i
]);
797 for(i
= 0; i
< MAX_QUEUE_SIZE
; i
++) {
798 skb_queue_purge(&priv
->ieee80211
->skb_aggQ
[i
]);
801 skb_queue_purge(&priv
->skb_queue
);
804 static void rtl8192_data_hard_stop(struct ieee80211_device
*ieee80211
)
808 static void rtl8192_data_hard_resume(struct ieee80211_device
*ieee80211
)
813 * this function TX data frames when the ieee80211 stack requires this.
814 * It checks also if we need to stop the ieee tx queue, eventually do it
816 static void rtl8192_hard_data_xmit(struct sk_buff
*skb
,
817 struct ieee80211_device
*ieee80211
, int rate
)
819 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
821 cb_desc
*tcb_desc
= (cb_desc
*)(skb
->cb
+ MAX_DEV_ADDR_SIZE
);
822 u8 queue_index
= tcb_desc
->queue_index
;
824 /* shall not be referred by command packet */
825 BUG_ON(queue_index
== TXCMD_QUEUE
);
827 if (priv
->bHwRadioOff
|| (!priv
->up
))
833 memcpy(skb
->cb
, &ieee80211
->dev
, sizeof(ieee80211
->dev
));
835 skb_push(skb
, priv
->ieee80211
->tx_headroom
);
836 ret
= rtl8192_tx(priv
, skb
);
841 if (queue_index
!= MGNT_QUEUE
) {
842 priv
->ieee80211
->stats
.tx_bytes
+= (skb
->len
- priv
->ieee80211
->tx_headroom
);
843 priv
->ieee80211
->stats
.tx_packets
++;
848 * This is a rough attempt to TX a frame
849 * This is called by the ieee 80211 stack to TX management frames.
850 * If the ring is full packet are dropped (for data frame the queue
851 * is stopped before this can happen).
853 static int rtl8192_hard_start_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee80211
)
855 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
857 cb_desc
*tcb_desc
= (cb_desc
*)(skb
->cb
+ MAX_DEV_ADDR_SIZE
);
858 u8 queue_index
= tcb_desc
->queue_index
;
860 if (queue_index
!= TXCMD_QUEUE
) {
861 if (priv
->bHwRadioOff
|| (!priv
->up
))
868 memcpy(skb
->cb
, &ieee80211
->dev
, sizeof(ieee80211
->dev
));
869 if (queue_index
== TXCMD_QUEUE
) {
870 rtl819xE_tx_cmd(priv
, skb
);
874 tcb_desc
->RATRIndex
= 7;
875 tcb_desc
->bTxDisableRateFallBack
= 1;
876 tcb_desc
->bTxUseDriverAssingedRate
= 1;
877 tcb_desc
->bTxEnableFwCalcDur
= 1;
878 skb_push(skb
, ieee80211
->tx_headroom
);
879 ret
= rtl8192_tx(priv
, skb
);
889 static void rtl8192_tx_isr(struct r8192_priv
*priv
, int prio
)
891 struct rtl8192_tx_ring
*ring
= &priv
->tx_ring
[prio
];
893 while (skb_queue_len(&ring
->queue
)) {
894 tx_desc_819x_pci
*entry
= &ring
->desc
[ring
->idx
];
898 * beacon packet will only use the first descriptor defaultly,
899 * and the OWN may not be cleared by the hardware
901 if (prio
!= BEACON_QUEUE
) {
904 ring
->idx
= (ring
->idx
+ 1) % ring
->entries
;
907 skb
= __skb_dequeue(&ring
->queue
);
908 pci_unmap_single(priv
->pdev
, le32_to_cpu(entry
->TxBuffAddr
),
909 skb
->len
, PCI_DMA_TODEVICE
);
914 if (prio
!= BEACON_QUEUE
) {
915 /* try to deal with the pending packets */
916 tasklet_schedule(&priv
->irq_tx_tasklet
);
920 static void rtl8192_stop_beacon(struct ieee80211_device
*ieee80211
)
924 static void rtl8192_config_rate(struct r8192_priv
*priv
, u16
* rate_config
)
926 struct ieee80211_network
*net
;
927 u8 i
=0, basic_rate
= 0;
928 net
= & priv
->ieee80211
->current_network
;
930 for (i
=0; i
<net
->rates_len
; i
++)
932 basic_rate
= net
->rates
[i
]&0x7f;
935 case MGN_1M
: *rate_config
|= RRSR_1M
; break;
936 case MGN_2M
: *rate_config
|= RRSR_2M
; break;
937 case MGN_5_5M
: *rate_config
|= RRSR_5_5M
; break;
938 case MGN_11M
: *rate_config
|= RRSR_11M
; break;
939 case MGN_6M
: *rate_config
|= RRSR_6M
; break;
940 case MGN_9M
: *rate_config
|= RRSR_9M
; break;
941 case MGN_12M
: *rate_config
|= RRSR_12M
; break;
942 case MGN_18M
: *rate_config
|= RRSR_18M
; break;
943 case MGN_24M
: *rate_config
|= RRSR_24M
; break;
944 case MGN_36M
: *rate_config
|= RRSR_36M
; break;
945 case MGN_48M
: *rate_config
|= RRSR_48M
; break;
946 case MGN_54M
: *rate_config
|= RRSR_54M
; break;
949 for (i
=0; i
<net
->rates_ex_len
; i
++)
951 basic_rate
= net
->rates_ex
[i
]&0x7f;
954 case MGN_1M
: *rate_config
|= RRSR_1M
; break;
955 case MGN_2M
: *rate_config
|= RRSR_2M
; break;
956 case MGN_5_5M
: *rate_config
|= RRSR_5_5M
; break;
957 case MGN_11M
: *rate_config
|= RRSR_11M
; break;
958 case MGN_6M
: *rate_config
|= RRSR_6M
; break;
959 case MGN_9M
: *rate_config
|= RRSR_9M
; break;
960 case MGN_12M
: *rate_config
|= RRSR_12M
; break;
961 case MGN_18M
: *rate_config
|= RRSR_18M
; break;
962 case MGN_24M
: *rate_config
|= RRSR_24M
; break;
963 case MGN_36M
: *rate_config
|= RRSR_36M
; break;
964 case MGN_48M
: *rate_config
|= RRSR_48M
; break;
965 case MGN_54M
: *rate_config
|= RRSR_54M
; break;
971 #define SHORT_SLOT_TIME 9
972 #define NON_SHORT_SLOT_TIME 20
974 static void rtl8192_update_cap(struct r8192_priv
*priv
, u16 cap
)
977 struct ieee80211_network
*net
= &priv
->ieee80211
->current_network
;
979 priv
->short_preamble
= cap
& WLAN_CAPABILITY_SHORT_PREAMBLE
;
980 tmp
= priv
->basic_rate
;
981 if (priv
->short_preamble
)
982 tmp
|= BRSR_AckShortPmb
;
983 write_nic_dword(priv
, RRSR
, tmp
);
985 if (net
->mode
& (IEEE_G
|IEEE_N_24G
))
988 if ((cap
& WLAN_CAPABILITY_SHORT_SLOT
)&&(!priv
->ieee80211
->pHTInfo
->bCurrentRT2RTLongSlotTime
))
990 slot_time
= SHORT_SLOT_TIME
;
992 else //long slot time
993 slot_time
= NON_SHORT_SLOT_TIME
;
994 priv
->slot_time
= slot_time
;
995 write_nic_byte(priv
, SLOT_TIME
, slot_time
);
1000 static void rtl8192_net_update(struct r8192_priv
*priv
)
1002 struct ieee80211_network
*net
;
1003 u16 BcnTimeCfg
= 0, BcnCW
= 6, BcnIFS
= 0xf;
1004 u16 rate_config
= 0;
1005 net
= &priv
->ieee80211
->current_network
;
1007 /* update Basic rate: RR, BRSR */
1008 rtl8192_config_rate(priv
, &rate_config
);
1011 * Select RRSR (in Legacy-OFDM and CCK)
1012 * For 8190, we select only 24M, 12M, 6M, 11M, 5.5M,
1013 * 2M, and 1M from the Basic rate.
1014 * We do not use other rates.
1016 priv
->basic_rate
= rate_config
&= 0x15f;
1019 write_nic_dword(priv
, BSSIDR
, ((u32
*)net
->bssid
)[0]);
1020 write_nic_word(priv
, BSSIDR
+4, ((u16
*)net
->bssid
)[2]);
1022 if (priv
->ieee80211
->iw_mode
== IW_MODE_ADHOC
)
1024 write_nic_word(priv
, ATIMWND
, 2);
1025 write_nic_word(priv
, BCN_DMATIME
, 256);
1026 write_nic_word(priv
, BCN_INTERVAL
, net
->beacon_interval
);
1028 * BIT15 of BCN_DRV_EARLY_INT will indicate
1029 * whether software beacon or hw beacon is applied.
1031 write_nic_word(priv
, BCN_DRV_EARLY_INT
, 10);
1032 write_nic_byte(priv
, BCN_ERR_THRESH
, 100);
1034 BcnTimeCfg
|= (BcnCW
<<BCN_TCFG_CW_SHIFT
);
1035 /* TODO: BcnIFS may required to be changed on ASIC */
1036 BcnTimeCfg
|= BcnIFS
<<BCN_TCFG_IFS
;
1037 write_nic_word(priv
, BCN_TCFG
, BcnTimeCfg
);
1041 static void rtl819xE_tx_cmd(struct r8192_priv
*priv
, struct sk_buff
*skb
)
1043 struct rtl8192_tx_ring
*ring
;
1044 tx_desc_819x_pci
*entry
;
1048 unsigned long flags
;
1050 ring
= &priv
->tx_ring
[TXCMD_QUEUE
];
1051 mapping
= pci_map_single(priv
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
1053 spin_lock_irqsave(&priv
->irq_th_lock
,flags
);
1054 idx
= (ring
->idx
+ skb_queue_len(&ring
->queue
)) % ring
->entries
;
1055 entry
= &ring
->desc
[idx
];
1057 tcb_desc
= (cb_desc
*)(skb
->cb
+ MAX_DEV_ADDR_SIZE
);
1059 entry
->LINIP
= tcb_desc
->bLastIniPkt
;
1060 entry
->FirstSeg
= 1;//first segment
1061 entry
->LastSeg
= 1; //last segment
1062 if(tcb_desc
->bCmdOrInit
== DESC_PACKET_TYPE_INIT
) {
1063 entry
->CmdInit
= DESC_PACKET_TYPE_INIT
;
1065 entry
->CmdInit
= DESC_PACKET_TYPE_NORMAL
;
1066 entry
->Offset
= sizeof(TX_FWINFO_8190PCI
) + 8;
1067 entry
->PktSize
= (u16
)(tcb_desc
->pkt_size
+ entry
->Offset
);
1068 entry
->QueueSelect
= QSLT_CMD
;
1069 entry
->TxFWInfoSize
= 0x08;
1070 entry
->RATid
= (u8
)DESC_PACKET_TYPE_INIT
;
1072 entry
->TxBufferSize
= skb
->len
;
1073 entry
->TxBuffAddr
= cpu_to_le32(mapping
);
1076 __skb_queue_tail(&ring
->queue
, skb
);
1077 spin_unlock_irqrestore(&priv
->irq_th_lock
,flags
);
1079 write_nic_byte(priv
, TPPoll
, TPPoll_CQ
);
1085 * Mapping Software/Hardware descriptor queue id to "Queue Select Field"
1086 * in TxFwInfo data structure
1088 static u8
MapHwQueueToFirmwareQueue(u8 QueueID
)
1094 QueueSelect
= QSLT_BE
;
1098 QueueSelect
= QSLT_BK
;
1102 QueueSelect
= QSLT_VO
;
1106 QueueSelect
= QSLT_VI
;
1110 QueueSelect
= QSLT_MGNT
;
1114 QueueSelect
= QSLT_BEACON
;
1118 QueueSelect
= QSLT_CMD
;
1123 RT_TRACE(COMP_ERR
, "Impossible Queue Selection: %d\n", QueueID
);
1129 static u8
MRateToHwRate8190Pci(u8 rate
)
1131 u8 ret
= DESC90_RATE1M
;
1134 case MGN_1M
: ret
= DESC90_RATE1M
; break;
1135 case MGN_2M
: ret
= DESC90_RATE2M
; break;
1136 case MGN_5_5M
: ret
= DESC90_RATE5_5M
; break;
1137 case MGN_11M
: ret
= DESC90_RATE11M
; break;
1138 case MGN_6M
: ret
= DESC90_RATE6M
; break;
1139 case MGN_9M
: ret
= DESC90_RATE9M
; break;
1140 case MGN_12M
: ret
= DESC90_RATE12M
; break;
1141 case MGN_18M
: ret
= DESC90_RATE18M
; break;
1142 case MGN_24M
: ret
= DESC90_RATE24M
; break;
1143 case MGN_36M
: ret
= DESC90_RATE36M
; break;
1144 case MGN_48M
: ret
= DESC90_RATE48M
; break;
1145 case MGN_54M
: ret
= DESC90_RATE54M
; break;
1147 // HT rate since here
1148 case MGN_MCS0
: ret
= DESC90_RATEMCS0
; break;
1149 case MGN_MCS1
: ret
= DESC90_RATEMCS1
; break;
1150 case MGN_MCS2
: ret
= DESC90_RATEMCS2
; break;
1151 case MGN_MCS3
: ret
= DESC90_RATEMCS3
; break;
1152 case MGN_MCS4
: ret
= DESC90_RATEMCS4
; break;
1153 case MGN_MCS5
: ret
= DESC90_RATEMCS5
; break;
1154 case MGN_MCS6
: ret
= DESC90_RATEMCS6
; break;
1155 case MGN_MCS7
: ret
= DESC90_RATEMCS7
; break;
1156 case MGN_MCS8
: ret
= DESC90_RATEMCS8
; break;
1157 case MGN_MCS9
: ret
= DESC90_RATEMCS9
; break;
1158 case MGN_MCS10
: ret
= DESC90_RATEMCS10
; break;
1159 case MGN_MCS11
: ret
= DESC90_RATEMCS11
; break;
1160 case MGN_MCS12
: ret
= DESC90_RATEMCS12
; break;
1161 case MGN_MCS13
: ret
= DESC90_RATEMCS13
; break;
1162 case MGN_MCS14
: ret
= DESC90_RATEMCS14
; break;
1163 case MGN_MCS15
: ret
= DESC90_RATEMCS15
; break;
1164 case (0x80|0x20): ret
= DESC90_RATEMCS32
; break;
1172 static u8
QueryIsShort(u8 TxHT
, u8 TxRate
, cb_desc
*tcb_desc
)
1176 tmp_Short
= (TxHT
==1)?((tcb_desc
->bUseShortGI
)?1:0):((tcb_desc
->bUseShortPreamble
)?1:0);
1178 if(TxHT
==1 && TxRate
!= DESC90_RATEMCS15
)
1185 * The tx procedure is just as following,
1186 * skb->cb will contain all the following information,
1187 * priority, morefrag, rate, &dev.
1189 static short rtl8192_tx(struct r8192_priv
*priv
, struct sk_buff
* skb
)
1191 struct rtl8192_tx_ring
*ring
;
1192 unsigned long flags
;
1193 cb_desc
*tcb_desc
= (cb_desc
*)(skb
->cb
+ MAX_DEV_ADDR_SIZE
);
1194 tx_desc_819x_pci
*pdesc
= NULL
;
1195 TX_FWINFO_8190PCI
*pTxFwInfo
= NULL
;
1197 bool multi_addr
= false, broad_addr
= false, uni_addr
= false;
1198 u8
*pda_addr
= NULL
;
1201 if (priv
->bdisable_nic
) {
1202 RT_TRACE(COMP_ERR
, "Nic is disabled! Can't tx packet len=%d qidx=%d!!!\n",
1203 skb
->len
, tcb_desc
->queue_index
);
1208 priv
->ieee80211
->bAwakePktSent
= true;
1211 mapping
= pci_map_single(priv
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
1213 /* collect the tx packets statitcs */
1214 pda_addr
= ((u8
*)skb
->data
) + sizeof(TX_FWINFO_8190PCI
);
1215 if (is_multicast_ether_addr(pda_addr
))
1217 else if (is_broadcast_ether_addr(pda_addr
))
1223 priv
->stats
.txbytesunicast
+= (u8
)(skb
->len
) - sizeof(TX_FWINFO_8190PCI
);
1225 /* fill tx firmware */
1226 pTxFwInfo
= (PTX_FWINFO_8190PCI
)skb
->data
;
1227 memset(pTxFwInfo
, 0, sizeof(TX_FWINFO_8190PCI
));
1228 pTxFwInfo
->TxHT
= (tcb_desc
->data_rate
&0x80) ? 1 : 0;
1229 pTxFwInfo
->TxRate
= MRateToHwRate8190Pci((u8
)tcb_desc
->data_rate
);
1230 pTxFwInfo
->EnableCPUDur
= tcb_desc
->bTxEnableFwCalcDur
;
1231 pTxFwInfo
->Short
= QueryIsShort(pTxFwInfo
->TxHT
, pTxFwInfo
->TxRate
, tcb_desc
);
1233 /* Aggregation related */
1234 if (tcb_desc
->bAMPDUEnable
) {
1235 pTxFwInfo
->AllowAggregation
= 1;
1236 pTxFwInfo
->RxMF
= tcb_desc
->ampdu_factor
;
1237 pTxFwInfo
->RxAMD
= tcb_desc
->ampdu_density
;
1239 pTxFwInfo
->AllowAggregation
= 0;
1240 pTxFwInfo
->RxMF
= 0;
1241 pTxFwInfo
->RxAMD
= 0;
1244 /* Protection mode related */
1245 pTxFwInfo
->RtsEnable
= (tcb_desc
->bRTSEnable
) ? 1 : 0;
1246 pTxFwInfo
->CtsEnable
= (tcb_desc
->bCTSEnable
) ? 1 : 0;
1247 pTxFwInfo
->RtsSTBC
= (tcb_desc
->bRTSSTBC
) ? 1 : 0;
1248 pTxFwInfo
->RtsHT
= (tcb_desc
->rts_rate
&0x80) ? 1 : 0;
1249 pTxFwInfo
->RtsRate
= MRateToHwRate8190Pci((u8
)tcb_desc
->rts_rate
);
1250 pTxFwInfo
->RtsBandwidth
= 0;
1251 pTxFwInfo
->RtsSubcarrier
= tcb_desc
->RTSSC
;
1252 pTxFwInfo
->RtsShort
= (pTxFwInfo
->RtsHT
== 0) ? (tcb_desc
->bRTSUseShortPreamble
? 1 : 0) : (tcb_desc
->bRTSUseShortGI
? 1 : 0);
1254 /* Set Bandwidth and sub-channel settings. */
1255 if (priv
->CurrentChannelBW
== HT_CHANNEL_WIDTH_20_40
) {
1256 if (tcb_desc
->bPacketBW
) {
1257 pTxFwInfo
->TxBandwidth
= 1;
1258 /* use duplicated mode */
1259 pTxFwInfo
->TxSubCarrier
= 0;
1261 pTxFwInfo
->TxBandwidth
= 0;
1262 pTxFwInfo
->TxSubCarrier
= priv
->nCur40MhzPrimeSC
;
1265 pTxFwInfo
->TxBandwidth
= 0;
1266 pTxFwInfo
->TxSubCarrier
= 0;
1269 spin_lock_irqsave(&priv
->irq_th_lock
, flags
);
1270 ring
= &priv
->tx_ring
[tcb_desc
->queue_index
];
1271 if (tcb_desc
->queue_index
!= BEACON_QUEUE
)
1272 idx
= (ring
->idx
+ skb_queue_len(&ring
->queue
)) % ring
->entries
;
1276 pdesc
= &ring
->desc
[idx
];
1277 if ((pdesc
->OWN
== 1) && (tcb_desc
->queue_index
!= BEACON_QUEUE
)) {
1278 RT_TRACE(COMP_ERR
, "No more TX desc@%d, ring->idx = %d,idx = %d,%x\n",
1279 tcb_desc
->queue_index
, ring
->idx
, idx
, skb
->len
);
1280 spin_unlock_irqrestore(&priv
->irq_th_lock
, flags
);
1284 /* fill tx descriptor */
1285 memset(pdesc
, 0, 12);
1290 pdesc
->Offset
= sizeof(TX_FWINFO_8190PCI
) + 8; /* We must add 8!! */
1291 pdesc
->PktSize
= (u16
)skb
->len
-sizeof(TX_FWINFO_8190PCI
);
1294 pdesc
->SecCAMID
= 0;
1295 pdesc
->RATid
= tcb_desc
->RATRIndex
;
1298 pdesc
->SecType
= 0x0;
1299 if (tcb_desc
->bHwSec
) {
1300 switch (priv
->ieee80211
->pairwise_key_type
) {
1301 case KEY_TYPE_WEP40
:
1302 case KEY_TYPE_WEP104
:
1303 pdesc
->SecType
= 0x1;
1307 pdesc
->SecType
= 0x2;
1311 pdesc
->SecType
= 0x3;
1315 pdesc
->SecType
= 0x0;
1324 pdesc
->QueueSelect
= MapHwQueueToFirmwareQueue(tcb_desc
->queue_index
);
1325 pdesc
->TxFWInfoSize
= sizeof(TX_FWINFO_8190PCI
);
1327 pdesc
->DISFB
= tcb_desc
->bTxDisableRateFallBack
;
1328 pdesc
->USERATE
= tcb_desc
->bTxUseDriverAssingedRate
;
1330 pdesc
->FirstSeg
= 1;
1332 pdesc
->TxBufferSize
= skb
->len
;
1334 pdesc
->TxBuffAddr
= cpu_to_le32(mapping
);
1335 __skb_queue_tail(&ring
->queue
, skb
);
1337 spin_unlock_irqrestore(&priv
->irq_th_lock
, flags
);
1338 priv
->ieee80211
->dev
->trans_start
= jiffies
;
1339 write_nic_word(priv
, TPPoll
, 0x01<<tcb_desc
->queue_index
);
1343 static short rtl8192_alloc_rx_desc_ring(struct r8192_priv
*priv
)
1345 rx_desc_819x_pci
*entry
= NULL
;
1348 priv
->rx_ring
= pci_alloc_consistent(priv
->pdev
,
1349 sizeof(*priv
->rx_ring
) * priv
->rxringcount
, &priv
->rx_ring_dma
);
1351 if (!priv
->rx_ring
|| (unsigned long)priv
->rx_ring
& 0xFF) {
1352 RT_TRACE(COMP_ERR
,"Cannot allocate RX ring\n");
1356 memset(priv
->rx_ring
, 0, sizeof(*priv
->rx_ring
) * priv
->rxringcount
);
1359 for (i
= 0; i
< priv
->rxringcount
; i
++) {
1360 struct sk_buff
*skb
= dev_alloc_skb(priv
->rxbuffersize
);
1361 dma_addr_t
*mapping
;
1362 entry
= &priv
->rx_ring
[i
];
1365 priv
->rx_buf
[i
] = skb
;
1366 mapping
= (dma_addr_t
*)skb
->cb
;
1367 *mapping
= pci_map_single(priv
->pdev
, skb_tail_pointer(skb
),
1368 priv
->rxbuffersize
, PCI_DMA_FROMDEVICE
);
1370 entry
->BufferAddress
= cpu_to_le32(*mapping
);
1372 entry
->Length
= priv
->rxbuffersize
;
1380 static int rtl8192_alloc_tx_desc_ring(struct r8192_priv
*priv
,
1381 unsigned int prio
, unsigned int entries
)
1383 tx_desc_819x_pci
*ring
;
1387 ring
= pci_alloc_consistent(priv
->pdev
, sizeof(*ring
) * entries
, &dma
);
1388 if (!ring
|| (unsigned long)ring
& 0xFF) {
1389 RT_TRACE(COMP_ERR
, "Cannot allocate TX ring (prio = %d)\n", prio
);
1393 memset(ring
, 0, sizeof(*ring
)*entries
);
1394 priv
->tx_ring
[prio
].desc
= ring
;
1395 priv
->tx_ring
[prio
].dma
= dma
;
1396 priv
->tx_ring
[prio
].idx
= 0;
1397 priv
->tx_ring
[prio
].entries
= entries
;
1398 skb_queue_head_init(&priv
->tx_ring
[prio
].queue
);
1400 for (i
= 0; i
< entries
; i
++)
1401 ring
[i
].NextDescAddress
=
1402 cpu_to_le32((u32
)dma
+ ((i
+ 1) % entries
) * sizeof(*ring
));
1407 static short rtl8192_pci_initdescring(struct r8192_priv
*priv
)
1412 ret
= rtl8192_alloc_rx_desc_ring(priv
);
1416 /* general process for other queue */
1417 for (i
= 0; i
< MAX_TX_QUEUE_COUNT
; i
++) {
1418 ret
= rtl8192_alloc_tx_desc_ring(priv
, i
, priv
->txringcount
);
1420 goto err_free_rings
;
1426 rtl8192_free_rx_ring(priv
);
1427 for (i
= 0; i
< MAX_TX_QUEUE_COUNT
; i
++)
1428 if (priv
->tx_ring
[i
].desc
)
1429 rtl8192_free_tx_ring(priv
, i
);
1433 static void rtl8192_pci_resetdescring(struct r8192_priv
*priv
)
1437 /* force the rx_idx to the first one */
1439 rx_desc_819x_pci
*entry
= NULL
;
1440 for (i
= 0; i
< priv
->rxringcount
; i
++) {
1441 entry
= &priv
->rx_ring
[i
];
1447 /* after reset, release previous pending packet, and force the
1448 * tx idx to the first one */
1449 for (i
= 0; i
< MAX_TX_QUEUE_COUNT
; i
++) {
1450 if (priv
->tx_ring
[i
].desc
) {
1451 struct rtl8192_tx_ring
*ring
= &priv
->tx_ring
[i
];
1453 while (skb_queue_len(&ring
->queue
)) {
1454 tx_desc_819x_pci
*entry
= &ring
->desc
[ring
->idx
];
1455 struct sk_buff
*skb
= __skb_dequeue(&ring
->queue
);
1457 pci_unmap_single(priv
->pdev
, le32_to_cpu(entry
->TxBuffAddr
),
1458 skb
->len
, PCI_DMA_TODEVICE
);
1460 ring
->idx
= (ring
->idx
+ 1) % ring
->entries
;
1467 static void rtl8192_link_change(struct ieee80211_device
*ieee
)
1469 struct r8192_priv
*priv
= ieee80211_priv(ieee
->dev
);
1471 if (ieee
->state
== IEEE80211_LINKED
)
1473 rtl8192_net_update(priv
);
1474 rtl8192_update_ratr_table(priv
);
1476 //add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
1477 if ((KEY_TYPE_WEP40
== ieee
->pairwise_key_type
) || (KEY_TYPE_WEP104
== ieee
->pairwise_key_type
))
1478 EnableHWSecurityConfig8192(priv
);
1482 write_nic_byte(priv
, 0x173, 0);
1485 rtl8192_update_msr(priv
);
1487 // 2007/10/16 MH MAC Will update TSF according to all received beacon, so we have
1488 // // To set CBSSID bit when link with any AP or STA.
1489 if (ieee
->iw_mode
== IW_MODE_INFRA
|| ieee
->iw_mode
== IW_MODE_ADHOC
)
1492 reg
= read_nic_dword(priv
, RCR
);
1493 if (priv
->ieee80211
->state
== IEEE80211_LINKED
)
1494 priv
->ReceiveConfig
= reg
|= RCR_CBSSID
;
1496 priv
->ReceiveConfig
= reg
&= ~RCR_CBSSID
;
1497 write_nic_dword(priv
, RCR
, reg
);
1502 static const struct ieee80211_qos_parameters def_qos_parameters
= {
1503 {3,3,3,3},/* cw_min */
1504 {7,7,7,7},/* cw_max */
1505 {2,2,2,2},/* aifs */
1506 {0,0,0,0},/* flags */
1507 {0,0,0,0} /* tx_op_limit */
1510 static void rtl8192_update_beacon(struct work_struct
* work
)
1512 struct r8192_priv
*priv
= container_of(work
, struct r8192_priv
, update_beacon_wq
.work
);
1513 struct ieee80211_device
* ieee
= priv
->ieee80211
;
1514 struct ieee80211_network
* net
= &ieee
->current_network
;
1516 if (ieee
->pHTInfo
->bCurrentHTSupport
)
1517 HTUpdateSelfAndPeerSetting(ieee
, net
);
1518 ieee
->pHTInfo
->bCurrentRT2RTLongSlotTime
= net
->bssht
.bdRT2RTLongSlotTime
;
1519 rtl8192_update_cap(priv
, net
->capability
);
1523 * background support to run QoS activate functionality
1525 static const int WDCAPARA_ADD
[] = {EDCAPARA_BE
,EDCAPARA_BK
,EDCAPARA_VI
,EDCAPARA_VO
};
1526 static void rtl8192_qos_activate(struct work_struct
* work
)
1528 struct r8192_priv
*priv
= container_of(work
, struct r8192_priv
, qos_activate
);
1529 struct ieee80211_qos_parameters
*qos_parameters
= &priv
->ieee80211
->current_network
.qos_data
.parameters
;
1530 u8 mode
= priv
->ieee80211
->current_network
.mode
;
1535 mutex_lock(&priv
->mutex
);
1536 if(priv
->ieee80211
->state
!= IEEE80211_LINKED
)
1538 RT_TRACE(COMP_QOS
,"qos active process with associate response received\n");
1539 /* It better set slot time at first */
1540 /* For we just support b/g mode at present, let the slot time at 9/20 selection */
1541 /* update the ac parameter to related registers */
1542 for(i
= 0; i
< QOS_QUEUE_NUM
; i
++) {
1543 //Mode G/A: slotTimeTimer = 9; Mode B: 20
1544 u1bAIFS
= qos_parameters
->aifs
[i
] * ((mode
&(IEEE_G
|IEEE_N_24G
)) ?9:20) + aSifsTime
;
1545 u4bAcParam
= ((((u32
)(qos_parameters
->tx_op_limit
[i
]))<< AC_PARAM_TXOP_LIMIT_OFFSET
)|
1546 (((u32
)(qos_parameters
->cw_max
[i
]))<< AC_PARAM_ECW_MAX_OFFSET
)|
1547 (((u32
)(qos_parameters
->cw_min
[i
]))<< AC_PARAM_ECW_MIN_OFFSET
)|
1548 ((u32
)u1bAIFS
<< AC_PARAM_AIFS_OFFSET
));
1549 write_nic_dword(priv
, WDCAPARA_ADD
[i
], u4bAcParam
);
1553 mutex_unlock(&priv
->mutex
);
1556 static int rtl8192_qos_handle_probe_response(struct r8192_priv
*priv
,
1558 struct ieee80211_network
*network
)
1561 u32 size
= sizeof(struct ieee80211_qos_parameters
);
1563 if(priv
->ieee80211
->state
!=IEEE80211_LINKED
)
1566 if ((priv
->ieee80211
->iw_mode
!= IW_MODE_INFRA
))
1569 if (network
->flags
& NETWORK_HAS_QOS_MASK
) {
1570 if (active_network
&&
1571 (network
->flags
& NETWORK_HAS_QOS_PARAMETERS
))
1572 network
->qos_data
.active
= network
->qos_data
.supported
;
1574 if ((network
->qos_data
.active
== 1) && (active_network
== 1) &&
1575 (network
->flags
& NETWORK_HAS_QOS_PARAMETERS
) &&
1576 (network
->qos_data
.old_param_count
!=
1577 network
->qos_data
.param_count
)) {
1578 network
->qos_data
.old_param_count
=
1579 network
->qos_data
.param_count
;
1580 queue_work(priv
->priv_wq
, &priv
->qos_activate
);
1581 RT_TRACE (COMP_QOS
, "QoS parameters change call "
1585 memcpy(&priv
->ieee80211
->current_network
.qos_data
.parameters
,
1586 &def_qos_parameters
, size
);
1588 if ((network
->qos_data
.active
== 1) && (active_network
== 1)) {
1589 queue_work(priv
->priv_wq
, &priv
->qos_activate
);
1590 RT_TRACE(COMP_QOS
, "QoS was disabled call qos_activate\n");
1592 network
->qos_data
.active
= 0;
1593 network
->qos_data
.supported
= 0;
1599 /* handle manage frame frame beacon and probe response */
1600 static int rtl8192_handle_beacon(struct net_device
* dev
,
1601 struct ieee80211_beacon
* beacon
,
1602 struct ieee80211_network
* network
)
1604 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1606 rtl8192_qos_handle_probe_response(priv
,1,network
);
1608 queue_delayed_work(priv
->priv_wq
, &priv
->update_beacon_wq
, 0);
1614 * handling the beaconing responses. if we get different QoS setting
1615 * off the network from the associated setting, adjust the QoS setting
1617 static int rtl8192_qos_association_resp(struct r8192_priv
*priv
,
1618 struct ieee80211_network
*network
)
1621 unsigned long flags
;
1622 u32 size
= sizeof(struct ieee80211_qos_parameters
);
1623 int set_qos_param
= 0;
1625 if ((priv
== NULL
) || (network
== NULL
))
1628 if (priv
->ieee80211
->state
!= IEEE80211_LINKED
)
1631 if ((priv
->ieee80211
->iw_mode
!= IW_MODE_INFRA
))
1634 spin_lock_irqsave(&priv
->ieee80211
->lock
, flags
);
1635 if (network
->flags
& NETWORK_HAS_QOS_PARAMETERS
) {
1636 memcpy(&priv
->ieee80211
->current_network
.qos_data
.parameters
,
1637 &network
->qos_data
.parameters
,
1638 sizeof(struct ieee80211_qos_parameters
));
1639 priv
->ieee80211
->current_network
.qos_data
.active
= 1;
1641 /* update qos parameter for current network */
1642 priv
->ieee80211
->current_network
.qos_data
.old_param_count
=
1643 priv
->ieee80211
->current_network
.qos_data
.param_count
;
1644 priv
->ieee80211
->current_network
.qos_data
.param_count
=
1645 network
->qos_data
.param_count
;
1648 memcpy(&priv
->ieee80211
->current_network
.qos_data
.parameters
,
1649 &def_qos_parameters
, size
);
1650 priv
->ieee80211
->current_network
.qos_data
.active
= 0;
1651 priv
->ieee80211
->current_network
.qos_data
.supported
= 0;
1655 spin_unlock_irqrestore(&priv
->ieee80211
->lock
, flags
);
1657 RT_TRACE(COMP_QOS
, "%s: network->flags = %d,%d\n", __FUNCTION__
,
1658 network
->flags
, priv
->ieee80211
->current_network
.qos_data
.active
);
1659 if (set_qos_param
== 1)
1660 queue_work(priv
->priv_wq
, &priv
->qos_activate
);
1666 static int rtl8192_handle_assoc_response(struct net_device
*dev
,
1667 struct ieee80211_assoc_response_frame
*resp
,
1668 struct ieee80211_network
*network
)
1670 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1671 rtl8192_qos_association_resp(priv
, network
);
1676 /* updateRATRTabel for MCS only. Basic rate is not implemented. */
1677 static void rtl8192_update_ratr_table(struct r8192_priv
* priv
)
1679 struct ieee80211_device
* ieee
= priv
->ieee80211
;
1680 u8
* pMcsRate
= ieee
->dot11HTOperationalRateSet
;
1684 rtl8192_config_rate(priv
, (u16
*)(&ratr_value
));
1685 ratr_value
|= (*(u16
*)(pMcsRate
)) << 12;
1690 ratr_value
&= 0x00000FF0;
1693 ratr_value
&= 0x0000000F;
1696 ratr_value
&= 0x00000FF7;
1700 if (ieee
->pHTInfo
->PeerMimoPs
== 0) //MIMO_PS_STATIC
1701 ratr_value
&= 0x0007F007;
1703 if (priv
->rf_type
== RF_1T2R
)
1704 ratr_value
&= 0x000FF007;
1706 ratr_value
&= 0x0F81F007;
1712 ratr_value
&= 0x0FFFFFFF;
1713 if(ieee
->pHTInfo
->bCurTxBW40MHz
&& ieee
->pHTInfo
->bCurShortGI40MHz
){
1714 ratr_value
|= 0x80000000;
1715 }else if(!ieee
->pHTInfo
->bCurTxBW40MHz
&& ieee
->pHTInfo
->bCurShortGI20MHz
){
1716 ratr_value
|= 0x80000000;
1718 write_nic_dword(priv
, RATR0
+rate_index
*4, ratr_value
);
1719 write_nic_byte(priv
, UFWP
, 1);
1722 static bool GetNmodeSupportBySecCfg8190Pci(struct net_device
*dev
)
1724 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1725 struct ieee80211_device
*ieee
= priv
->ieee80211
;
1727 return !(ieee
->rtllib_ap_sec_type
&&
1728 (ieee
->rtllib_ap_sec_type(ieee
)&(SEC_ALG_WEP
|SEC_ALG_TKIP
)));
1731 static void rtl8192_refresh_supportrate(struct r8192_priv
* priv
)
1733 struct ieee80211_device
* ieee
= priv
->ieee80211
;
1734 //we donot consider set support rate for ABG mode, only HT MCS rate is set here.
1735 if (ieee
->mode
== WIRELESS_MODE_N_24G
|| ieee
->mode
== WIRELESS_MODE_N_5G
)
1737 memcpy(ieee
->Regdot11HTOperationalRateSet
, ieee
->RegHTSuppRateSet
, 16);
1740 memset(ieee
->Regdot11HTOperationalRateSet
, 0, 16);
1743 static u8
rtl8192_getSupportedWireleeMode(void)
1745 return (WIRELESS_MODE_N_24G
|WIRELESS_MODE_G
|WIRELESS_MODE_B
);
1748 static void rtl8192_SetWirelessMode(struct net_device
* dev
, u8 wireless_mode
)
1750 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1751 u8 bSupportMode
= rtl8192_getSupportedWireleeMode();
1753 if ((wireless_mode
== WIRELESS_MODE_AUTO
) || ((wireless_mode
&bSupportMode
)==0))
1755 if(bSupportMode
& WIRELESS_MODE_N_24G
)
1757 wireless_mode
= WIRELESS_MODE_N_24G
;
1759 else if(bSupportMode
& WIRELESS_MODE_N_5G
)
1761 wireless_mode
= WIRELESS_MODE_N_5G
;
1763 else if((bSupportMode
& WIRELESS_MODE_A
))
1765 wireless_mode
= WIRELESS_MODE_A
;
1767 else if((bSupportMode
& WIRELESS_MODE_G
))
1769 wireless_mode
= WIRELESS_MODE_G
;
1771 else if((bSupportMode
& WIRELESS_MODE_B
))
1773 wireless_mode
= WIRELESS_MODE_B
;
1776 RT_TRACE(COMP_ERR
, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__
,bSupportMode
);
1777 wireless_mode
= WIRELESS_MODE_B
;
1780 priv
->ieee80211
->mode
= wireless_mode
;
1782 if ((wireless_mode
== WIRELESS_MODE_N_24G
) || (wireless_mode
== WIRELESS_MODE_N_5G
))
1783 priv
->ieee80211
->pHTInfo
->bEnableHT
= 1;
1785 priv
->ieee80211
->pHTInfo
->bEnableHT
= 0;
1786 RT_TRACE(COMP_INIT
, "Current Wireless Mode is %x\n", wireless_mode
);
1787 rtl8192_refresh_supportrate(priv
);
1790 static bool GetHalfNmodeSupportByAPs819xPci(struct net_device
* dev
)
1792 struct r8192_priv
* priv
= ieee80211_priv(dev
);
1793 struct ieee80211_device
* ieee
= priv
->ieee80211
;
1795 return ieee
->bHalfWirelessN24GMode
;
1798 static short rtl8192_is_tx_queue_empty(struct net_device
*dev
)
1801 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1802 for (i
=0; i
<=MGNT_QUEUE
; i
++)
1804 if ((i
== TXCMD_QUEUE
) || (i
== HCCA_QUEUE
) )
1806 if (skb_queue_len(&(&priv
->tx_ring
[i
])->queue
) > 0){
1807 printk("===>tx queue is not empty:%d, %d\n", i
, skb_queue_len(&(&priv
->tx_ring
[i
])->queue
));
1814 static void rtl8192_hw_sleep_down(struct r8192_priv
*priv
)
1816 MgntActSet_RF_State(priv
, eRfSleep
, RF_CHANGE_BY_PS
);
1819 static void rtl8192_hw_wakeup(struct net_device
* dev
)
1821 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1822 MgntActSet_RF_State(priv
, eRfOn
, RF_CHANGE_BY_PS
);
1825 static void rtl8192_hw_wakeup_wq (struct work_struct
*work
)
1827 struct delayed_work
*dwork
= container_of(work
,struct delayed_work
,work
);
1828 struct ieee80211_device
*ieee
= container_of(dwork
,struct ieee80211_device
,hw_wakeup_wq
);
1829 struct net_device
*dev
= ieee
->dev
;
1830 rtl8192_hw_wakeup(dev
);
1834 #define MIN_SLEEP_TIME 50
1835 #define MAX_SLEEP_TIME 10000
1836 static void rtl8192_hw_to_sleep(struct net_device
*dev
, u32 th
, u32 tl
)
1838 struct r8192_priv
*priv
= ieee80211_priv(dev
);
1842 // Writing HW register with 0 equals to disable
1843 // the timer, that is not really what we want
1845 tl
-= MSECS(8+16+7);
1847 // If the interval in witch we are requested to sleep is too
1848 // short then give up and remain awake
1849 // when we sleep after send null frame, the timer will be too short to sleep.
1851 if(((tl
>=rb
)&& (tl
-rb
) <= MSECS(MIN_SLEEP_TIME
))
1852 ||((rb
>tl
)&& (rb
-tl
) < MSECS(MIN_SLEEP_TIME
))) {
1853 printk("too short to sleep::%x, %x, %lx\n",tl
, rb
, MSECS(MIN_SLEEP_TIME
));
1857 if(((tl
> rb
) && ((tl
-rb
) > MSECS(MAX_SLEEP_TIME
)))||
1858 ((tl
< rb
) && (tl
>MSECS(69)) && ((rb
-tl
) > MSECS(MAX_SLEEP_TIME
)))||
1859 ((tl
<rb
)&&(tl
<MSECS(69))&&((tl
+0xffffffff-rb
)>MSECS(MAX_SLEEP_TIME
)))) {
1860 printk("========>too long to sleep:%x, %x, %lx\n", tl
, rb
, MSECS(MAX_SLEEP_TIME
));
1864 tmp
= (tl
>rb
)?(tl
-rb
):(rb
-tl
);
1865 queue_delayed_work(priv
->ieee80211
->wq
,
1866 &priv
->ieee80211
->hw_wakeup_wq
,tmp
);
1868 rtl8192_hw_sleep_down(priv
);
1871 static void rtl8192_init_priv_variable(struct r8192_priv
*priv
)
1874 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
1876 // Default Halt the NIC if RF is OFF.
1877 pPSC
->RegRfPsLevel
|= RT_RF_OFF_LEVL_HALT_NIC
;
1878 pPSC
->RegRfPsLevel
|= RT_RF_OFF_LEVL_CLK_REQ
;
1879 pPSC
->RegRfPsLevel
|= RT_RF_OFF_LEVL_ASPM
;
1880 pPSC
->RegRfPsLevel
|= RT_RF_LPS_LEVEL_ASPM
;
1881 pPSC
->bLeisurePs
= true;
1882 priv
->ieee80211
->RegMaxLPSAwakeIntvl
= 5;
1883 priv
->bHwRadioOff
= false;
1885 priv
->being_init_adapter
= false;
1886 priv
->txringcount
= 64;//32;
1887 priv
->rxbuffersize
= 9100;//2048;//1024;
1888 priv
->rxringcount
= MAX_RX_COUNT
;//64;
1889 priv
->chan
= 1; //set to channel 1
1890 priv
->RegWirelessMode
= WIRELESS_MODE_AUTO
;
1891 priv
->RegChannelPlan
= 0xf;
1892 priv
->ieee80211
->mode
= WIRELESS_MODE_AUTO
; //SET AUTO
1893 priv
->ieee80211
->iw_mode
= IW_MODE_INFRA
;
1894 priv
->ieee80211
->ieee_up
=0;
1895 priv
->retry_rts
= DEFAULT_RETRY_RTS
;
1896 priv
->retry_data
= DEFAULT_RETRY_DATA
;
1897 priv
->ieee80211
->rts
= DEFAULT_RTS_THRESHOLD
;
1898 priv
->ieee80211
->rate
= 110; //11 mbps
1899 priv
->ieee80211
->short_slot
= 1;
1900 priv
->promisc
= (priv
->ieee80211
->dev
->flags
& IFF_PROMISC
) ? 1:0;
1901 priv
->bcck_in_ch14
= false;
1902 priv
->CCKPresentAttentuation
= 0;
1903 priv
->rfa_txpowertrackingindex
= 0;
1904 priv
->rfc_txpowertrackingindex
= 0;
1906 //added by amy for silent reset
1907 priv
->ResetProgress
= RESET_TYPE_NORESET
;
1908 priv
->bForcedSilentReset
= 0;
1909 priv
->bDisableNormalResetCheck
= false;
1910 priv
->force_reset
= false;
1911 //added by amy for power save
1912 priv
->RfOffReason
= 0;
1913 priv
->bHwRfOffAction
= 0;
1914 priv
->PowerSaveControl
.bInactivePs
= true;
1915 priv
->PowerSaveControl
.bIPSModeBackup
= false;
1917 priv
->ieee80211
->current_network
.beacon_interval
= DEFAULT_BEACONINTERVAL
;
1918 priv
->ieee80211
->iw_mode
= IW_MODE_INFRA
;
1919 priv
->ieee80211
->softmac_features
= IEEE_SOFTMAC_SCAN
|
1920 IEEE_SOFTMAC_ASSOCIATE
| IEEE_SOFTMAC_PROBERQ
|
1921 IEEE_SOFTMAC_PROBERS
| IEEE_SOFTMAC_TX_QUEUE
;/* |
1922 IEEE_SOFTMAC_BEACONS;*///added by amy
080604 //| //IEEE_SOFTMAC_SINGLE_QUEUE;
1924 priv
->ieee80211
->active_scan
= 1;
1925 priv
->ieee80211
->modulation
= IEEE80211_CCK_MODULATION
| IEEE80211_OFDM_MODULATION
;
1926 priv
->ieee80211
->host_encrypt
= 1;
1927 priv
->ieee80211
->host_decrypt
= 1;
1928 priv
->ieee80211
->start_send_beacons
= rtl8192_start_beacon
;
1929 priv
->ieee80211
->stop_send_beacons
= rtl8192_stop_beacon
;
1930 priv
->ieee80211
->softmac_hard_start_xmit
= rtl8192_hard_start_xmit
;
1931 priv
->ieee80211
->set_chan
= rtl8192_set_chan
;
1932 priv
->ieee80211
->link_change
= rtl8192_link_change
;
1933 priv
->ieee80211
->softmac_data_hard_start_xmit
= rtl8192_hard_data_xmit
;
1934 priv
->ieee80211
->data_hard_stop
= rtl8192_data_hard_stop
;
1935 priv
->ieee80211
->data_hard_resume
= rtl8192_data_hard_resume
;
1936 priv
->ieee80211
->init_wmmparam_flag
= 0;
1937 priv
->ieee80211
->fts
= DEFAULT_FRAG_THRESHOLD
;
1938 priv
->ieee80211
->check_nic_enough_desc
= check_nic_enough_desc
;
1939 priv
->ieee80211
->tx_headroom
= sizeof(TX_FWINFO_8190PCI
);
1940 priv
->ieee80211
->qos_support
= 1;
1941 priv
->ieee80211
->SetBWModeHandler
= rtl8192_SetBWMode
;
1942 priv
->ieee80211
->handle_assoc_response
= rtl8192_handle_assoc_response
;
1943 priv
->ieee80211
->handle_beacon
= rtl8192_handle_beacon
;
1945 priv
->ieee80211
->sta_wake_up
= rtl8192_hw_wakeup
;
1946 priv
->ieee80211
->enter_sleep_state
= rtl8192_hw_to_sleep
;
1947 priv
->ieee80211
->ps_is_queue_empty
= rtl8192_is_tx_queue_empty
;
1948 priv
->ieee80211
->GetNmodeSupportBySecCfg
= GetNmodeSupportBySecCfg8190Pci
;
1949 priv
->ieee80211
->SetWirelessMode
= rtl8192_SetWirelessMode
;
1950 priv
->ieee80211
->GetHalfNmodeSupportByAPsHandler
= GetHalfNmodeSupportByAPs819xPci
;
1952 priv
->ieee80211
->InitialGainHandler
= InitialGain819xPci
;
1955 priv
->ieee80211
->ieee80211_ips_leave_wq
= ieee80211_ips_leave_wq
;
1956 priv
->ieee80211
->ieee80211_ips_leave
= ieee80211_ips_leave
;
1959 priv
->ieee80211
->LeisurePSLeave
= LeisurePSLeave
;
1962 priv
->ieee80211
->SetHwRegHandler
= rtl8192e_SetHwReg
;
1963 priv
->ieee80211
->rtllib_ap_sec_type
= rtl8192e_ap_sec_type
;
1965 priv
->ShortRetryLimit
= 0x30;
1966 priv
->LongRetryLimit
= 0x30;
1968 priv
->ReceiveConfig
= RCR_ADD3
|
1969 RCR_AMF
| RCR_ADF
| //accept management/data
1970 RCR_AICV
| //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
1971 RCR_AB
| RCR_AM
| RCR_APM
| //accept BC/MC/UC
1972 RCR_AAP
| ((u32
)7<<RCR_MXDMA_OFFSET
) |
1973 ((u32
)7 << RCR_FIFO_OFFSET
) | RCR_ONLYERLPKT
;
1975 priv
->pFirmware
= vzalloc(sizeof(rt_firmware
));
1977 /* rx related queue */
1978 skb_queue_head_init(&priv
->skb_queue
);
1980 /* Tx related queue */
1981 for(i
= 0; i
< MAX_QUEUE_SIZE
; i
++) {
1982 skb_queue_head_init(&priv
->ieee80211
->skb_waitQ
[i
]);
1984 for(i
= 0; i
< MAX_QUEUE_SIZE
; i
++) {
1985 skb_queue_head_init(&priv
->ieee80211
->skb_aggQ
[i
]);
1987 priv
->rf_set_chan
= rtl8192_phy_SwChnl
;
1990 static void rtl8192_init_priv_lock(struct r8192_priv
* priv
)
1992 spin_lock_init(&priv
->irq_th_lock
);
1993 spin_lock_init(&priv
->rf_ps_lock
);
1994 sema_init(&priv
->wx_sem
,1);
1995 sema_init(&priv
->rf_sem
,1);
1996 mutex_init(&priv
->mutex
);
1999 /* init tasklet and wait_queue here */
2000 #define DRV_NAME "wlan0"
2001 static void rtl8192_init_priv_task(struct r8192_priv
*priv
)
2003 priv
->priv_wq
= create_workqueue(DRV_NAME
);
2006 INIT_WORK(&priv
->ieee80211
->ips_leave_wq
, IPSLeave_wq
);
2009 INIT_WORK(&priv
->reset_wq
, rtl8192_restart
);
2010 INIT_DELAYED_WORK(&priv
->watch_dog_wq
, rtl819x_watchdog_wqcallback
);
2011 INIT_DELAYED_WORK(&priv
->txpower_tracking_wq
, dm_txpower_trackingcallback
);
2012 INIT_DELAYED_WORK(&priv
->rfpath_check_wq
, dm_rf_pathcheck_workitemcallback
);
2013 INIT_DELAYED_WORK(&priv
->update_beacon_wq
, rtl8192_update_beacon
);
2014 INIT_WORK(&priv
->qos_activate
, rtl8192_qos_activate
);
2015 INIT_DELAYED_WORK(&priv
->ieee80211
->hw_wakeup_wq
, rtl8192_hw_wakeup_wq
);
2017 tasklet_init(&priv
->irq_rx_tasklet
, rtl8192_irq_rx_tasklet
,
2018 (unsigned long) priv
);
2019 tasklet_init(&priv
->irq_tx_tasklet
, rtl8192_irq_tx_tasklet
,
2020 (unsigned long) priv
);
2021 tasklet_init(&priv
->irq_prepare_beacon_tasklet
, rtl8192_prepare_beacon
,
2022 (unsigned long) priv
);
2025 static void rtl8192_get_eeprom_size(struct r8192_priv
*priv
)
2028 RT_TRACE(COMP_INIT
, "===========>%s()\n", __FUNCTION__
);
2029 curCR
= read_nic_dword(priv
, EPROM_CMD
);
2030 RT_TRACE(COMP_INIT
, "read from Reg Cmd9346CR(%x):%x\n", EPROM_CMD
, curCR
);
2031 //whether need I consider BIT5?
2032 priv
->epromtype
= (curCR
& EPROM_CMD_9356SEL
) ? EPROM_93c56
: EPROM_93c46
;
2033 RT_TRACE(COMP_INIT
, "<===========%s(), epromtype:%d\n", __FUNCTION__
, priv
->epromtype
);
2037 * Adapter->EEPROMAddressSize should be set before this function call.
2038 * EEPROM address size can be got through GetEEPROMSize8185()
2040 static void rtl8192_read_eeprom_info(struct r8192_priv
*priv
)
2042 struct net_device
*dev
= priv
->ieee80211
->dev
;
2044 u8 ICVer8192
, ICVer8256
;
2045 u16 i
,usValue
, IC_Version
;
2047 u8 bMac_Tmp_Addr
[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x01};
2048 RT_TRACE(COMP_INIT
, "====> rtl8192_read_eeprom_info\n");
2051 // TODO: I don't know if we need to apply EF function to EEPROM read function
2053 //2 Read EEPROM ID to make sure autoload is success
2054 EEPROMId
= eprom_read(priv
, 0);
2055 if( EEPROMId
!= RTL8190_EEPROM_ID
)
2057 RT_TRACE(COMP_ERR
, "EEPROM ID is invalid:%x, %x\n", EEPROMId
, RTL8190_EEPROM_ID
);
2058 priv
->AutoloadFailFlag
=true;
2062 priv
->AutoloadFailFlag
=false;
2066 // Assign Chip Version ID
2068 // Read IC Version && Channel Plan
2069 if(!priv
->AutoloadFailFlag
)
2072 priv
->eeprom_vid
= eprom_read(priv
, (EEPROM_VID
>> 1));
2073 priv
->eeprom_did
= eprom_read(priv
, (EEPROM_DID
>> 1));
2075 usValue
= eprom_read(priv
, (u16
)(EEPROM_Customer_ID
>>1)) >> 8 ;
2076 priv
->eeprom_CustomerID
= (u8
)( usValue
& 0xff);
2077 usValue
= eprom_read(priv
, (EEPROM_ICVersion_ChannelPlan
>>1));
2078 priv
->eeprom_ChannelPlan
= usValue
&0xff;
2079 IC_Version
= ((usValue
&0xff00)>>8);
2081 ICVer8192
= (IC_Version
&0xf); //bit0~3; 1:A cut, 2:B cut, 3:C cut...
2082 ICVer8256
= ((IC_Version
&0xf0)>>4);//bit4~6, bit7 reserved for other RF chip; 1:A cut, 2:B cut, 3:C cut...
2083 RT_TRACE(COMP_INIT
, "ICVer8192 = 0x%x\n", ICVer8192
);
2084 RT_TRACE(COMP_INIT
, "ICVer8256 = 0x%x\n", ICVer8256
);
2085 if(ICVer8192
== 0x2) //B-cut
2087 if(ICVer8256
== 0x5) //E-cut
2088 priv
->card_8192_version
= VERSION_8190_BE
;
2091 switch(priv
->card_8192_version
)
2093 case VERSION_8190_BD
:
2094 case VERSION_8190_BE
:
2097 priv
->card_8192_version
= VERSION_8190_BD
;
2100 RT_TRACE(COMP_INIT
, "\nIC Version = 0x%x\n", priv
->card_8192_version
);
2104 priv
->card_8192_version
= VERSION_8190_BD
;
2105 priv
->eeprom_vid
= 0;
2106 priv
->eeprom_did
= 0;
2107 priv
->eeprom_CustomerID
= 0;
2108 priv
->eeprom_ChannelPlan
= 0;
2109 RT_TRACE(COMP_INIT
, "IC Version = 0x%x\n", 0xff);
2112 RT_TRACE(COMP_INIT
, "EEPROM VID = 0x%4x\n", priv
->eeprom_vid
);
2113 RT_TRACE(COMP_INIT
, "EEPROM DID = 0x%4x\n", priv
->eeprom_did
);
2114 RT_TRACE(COMP_INIT
,"EEPROM Customer ID: 0x%2x\n", priv
->eeprom_CustomerID
);
2116 //2 Read Permanent MAC address
2117 if(!priv
->AutoloadFailFlag
)
2119 for(i
= 0; i
< 6; i
+= 2)
2121 usValue
= eprom_read(priv
, (u16
) ((EEPROM_NODE_ADDRESS_BYTE_0
+i
)>>1));
2122 *(u16
*)(&dev
->dev_addr
[i
]) = usValue
;
2125 // when auto load failed, the last address byte set to be a random one.
2126 // added by david woo.2007/11/7
2127 memcpy(dev
->dev_addr
, bMac_Tmp_Addr
, 6);
2130 RT_TRACE(COMP_INIT
, "Permanent Address = %pM\n", dev
->dev_addr
);
2132 //2 TX Power Check EEPROM Fail or not
2133 if(priv
->card_8192_version
> VERSION_8190_BD
) {
2134 priv
->bTXPowerDataReadFromEEPORM
= true;
2136 priv
->bTXPowerDataReadFromEEPORM
= false;
2139 // 2007/11/15 MH 8190PCI Default=2T4R, 8192PCIE default=1T2R
2140 priv
->rf_type
= RTL819X_DEFAULT_RF_TYPE
;
2142 if(priv
->card_8192_version
> VERSION_8190_BD
)
2144 // Read RF-indication and Tx Power gain index diff of legacy to HT OFDM rate.
2145 if(!priv
->AutoloadFailFlag
)
2147 tempval
= (eprom_read(priv
, (EEPROM_RFInd_PowerDiff
>>1))) & 0xff;
2148 priv
->EEPROMLegacyHTTxPowerDiff
= tempval
& 0xf; // bit[3:0]
2150 if (tempval
&0x80) //RF-indication, bit[7]
2151 priv
->rf_type
= RF_1T2R
;
2153 priv
->rf_type
= RF_2T4R
;
2157 priv
->EEPROMLegacyHTTxPowerDiff
= EEPROM_Default_LegacyHTTxPowerDiff
;
2159 RT_TRACE(COMP_INIT
, "EEPROMLegacyHTTxPowerDiff = %d\n",
2160 priv
->EEPROMLegacyHTTxPowerDiff
);
2162 // Read ThermalMeter from EEPROM
2163 if(!priv
->AutoloadFailFlag
)
2165 priv
->EEPROMThermalMeter
= (u8
)(((eprom_read(priv
, (EEPROM_ThermalMeter
>>1))) & 0xff00)>>8);
2169 priv
->EEPROMThermalMeter
= EEPROM_Default_ThermalMeter
;
2171 RT_TRACE(COMP_INIT
, "ThermalMeter = %d\n", priv
->EEPROMThermalMeter
);
2172 //vivi, for tx power track
2173 priv
->TSSI_13dBm
= priv
->EEPROMThermalMeter
*100;
2175 if(priv
->epromtype
== EPROM_93c46
)
2177 // Read antenna tx power offset of B/C/D to A and CrystalCap from EEPROM
2178 if(!priv
->AutoloadFailFlag
)
2180 usValue
= eprom_read(priv
, (EEPROM_TxPwDiff_CrystalCap
>>1));
2181 priv
->EEPROMAntPwDiff
= (usValue
&0x0fff);
2182 priv
->EEPROMCrystalCap
= (u8
)((usValue
&0xf000)>>12);
2186 priv
->EEPROMAntPwDiff
= EEPROM_Default_AntTxPowerDiff
;
2187 priv
->EEPROMCrystalCap
= EEPROM_Default_TxPwDiff_CrystalCap
;
2189 RT_TRACE(COMP_INIT
, "EEPROMAntPwDiff = %d\n", priv
->EEPROMAntPwDiff
);
2190 RT_TRACE(COMP_INIT
, "EEPROMCrystalCap = %d\n", priv
->EEPROMCrystalCap
);
2193 // Get per-channel Tx Power Level
2195 for(i
=0; i
<14; i
+=2)
2197 if(!priv
->AutoloadFailFlag
)
2199 usValue
= eprom_read(priv
, (u16
) ((EEPROM_TxPwIndex_CCK
+i
)>>1) );
2203 usValue
= EEPROM_Default_TxPower
;
2205 *((u16
*)(&priv
->EEPROMTxPowerLevelCCK
[i
])) = usValue
;
2206 RT_TRACE(COMP_INIT
,"CCK Tx Power Level, Index %d = 0x%02x\n", i
, priv
->EEPROMTxPowerLevelCCK
[i
]);
2207 RT_TRACE(COMP_INIT
, "CCK Tx Power Level, Index %d = 0x%02x\n", i
+1, priv
->EEPROMTxPowerLevelCCK
[i
+1]);
2209 for(i
=0; i
<14; i
+=2)
2211 if(!priv
->AutoloadFailFlag
)
2213 usValue
= eprom_read(priv
, (u16
) ((EEPROM_TxPwIndex_OFDM_24G
+i
)>>1) );
2217 usValue
= EEPROM_Default_TxPower
;
2219 *((u16
*)(&priv
->EEPROMTxPowerLevelOFDM24G
[i
])) = usValue
;
2220 RT_TRACE(COMP_INIT
, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i
, priv
->EEPROMTxPowerLevelOFDM24G
[i
]);
2221 RT_TRACE(COMP_INIT
, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i
+1, priv
->EEPROMTxPowerLevelOFDM24G
[i
+1]);
2226 // Update HAL variables.
2228 if(priv
->epromtype
== EPROM_93c46
)
2232 priv
->TxPowerLevelCCK
[i
] = priv
->EEPROMTxPowerLevelCCK
[i
];
2233 priv
->TxPowerLevelOFDM24G
[i
] = priv
->EEPROMTxPowerLevelOFDM24G
[i
];
2235 priv
->LegacyHTTxPowerDiff
= priv
->EEPROMLegacyHTTxPowerDiff
;
2236 // Antenna B gain offset to antenna A, bit0~3
2237 priv
->AntennaTxPwDiff
[0] = (priv
->EEPROMAntPwDiff
& 0xf);
2238 // Antenna C gain offset to antenna A, bit4~7
2239 priv
->AntennaTxPwDiff
[1] = ((priv
->EEPROMAntPwDiff
& 0xf0)>>4);
2240 // Antenna D gain offset to antenna A, bit8~11
2241 priv
->AntennaTxPwDiff
[2] = ((priv
->EEPROMAntPwDiff
& 0xf00)>>8);
2242 // CrystalCap, bit12~15
2243 priv
->CrystalCap
= priv
->EEPROMCrystalCap
;
2244 // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
2245 priv
->ThermalMeter
[0] = (priv
->EEPROMThermalMeter
& 0xf);
2246 priv
->ThermalMeter
[1] = ((priv
->EEPROMThermalMeter
& 0xf0)>>4);
2248 else if(priv
->epromtype
== EPROM_93c56
)
2250 for(i
=0; i
<3; i
++) // channel 1~3 use the same Tx Power Level.
2252 priv
->TxPowerLevelCCK_A
[i
] = priv
->EEPROMRfACCKChnl1TxPwLevel
[0];
2253 priv
->TxPowerLevelOFDM24G_A
[i
] = priv
->EEPROMRfAOfdmChnlTxPwLevel
[0];
2254 priv
->TxPowerLevelCCK_C
[i
] = priv
->EEPROMRfCCCKChnl1TxPwLevel
[0];
2255 priv
->TxPowerLevelOFDM24G_C
[i
] = priv
->EEPROMRfCOfdmChnlTxPwLevel
[0];
2257 for(i
=3; i
<9; i
++) // channel 4~9 use the same Tx Power Level
2259 priv
->TxPowerLevelCCK_A
[i
] = priv
->EEPROMRfACCKChnl1TxPwLevel
[1];
2260 priv
->TxPowerLevelOFDM24G_A
[i
] = priv
->EEPROMRfAOfdmChnlTxPwLevel
[1];
2261 priv
->TxPowerLevelCCK_C
[i
] = priv
->EEPROMRfCCCKChnl1TxPwLevel
[1];
2262 priv
->TxPowerLevelOFDM24G_C
[i
] = priv
->EEPROMRfCOfdmChnlTxPwLevel
[1];
2264 for(i
=9; i
<14; i
++) // channel 10~14 use the same Tx Power Level
2266 priv
->TxPowerLevelCCK_A
[i
] = priv
->EEPROMRfACCKChnl1TxPwLevel
[2];
2267 priv
->TxPowerLevelOFDM24G_A
[i
] = priv
->EEPROMRfAOfdmChnlTxPwLevel
[2];
2268 priv
->TxPowerLevelCCK_C
[i
] = priv
->EEPROMRfCCCKChnl1TxPwLevel
[2];
2269 priv
->TxPowerLevelOFDM24G_C
[i
] = priv
->EEPROMRfCOfdmChnlTxPwLevel
[2];
2272 RT_TRACE(COMP_INIT
, "priv->TxPowerLevelCCK_A[%d] = 0x%x\n", i
, priv
->TxPowerLevelCCK_A
[i
]);
2274 RT_TRACE(COMP_INIT
,"priv->TxPowerLevelOFDM24G_A[%d] = 0x%x\n", i
, priv
->TxPowerLevelOFDM24G_A
[i
]);
2276 RT_TRACE(COMP_INIT
, "priv->TxPowerLevelCCK_C[%d] = 0x%x\n", i
, priv
->TxPowerLevelCCK_C
[i
]);
2278 RT_TRACE(COMP_INIT
, "priv->TxPowerLevelOFDM24G_C[%d] = 0x%x\n", i
, priv
->TxPowerLevelOFDM24G_C
[i
]);
2279 priv
->LegacyHTTxPowerDiff
= priv
->EEPROMLegacyHTTxPowerDiff
;
2280 priv
->AntennaTxPwDiff
[0] = 0;
2281 priv
->AntennaTxPwDiff
[1] = 0;
2282 priv
->AntennaTxPwDiff
[2] = 0;
2283 priv
->CrystalCap
= priv
->EEPROMCrystalCap
;
2284 // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
2285 priv
->ThermalMeter
[0] = (priv
->EEPROMThermalMeter
& 0xf);
2286 priv
->ThermalMeter
[1] = ((priv
->EEPROMThermalMeter
& 0xf0)>>4);
2290 if(priv
->rf_type
== RF_1T2R
)
2292 RT_TRACE(COMP_INIT
, "1T2R config\n");
2294 else if (priv
->rf_type
== RF_2T4R
)
2296 RT_TRACE(COMP_INIT
, "2T4R config\n");
2299 // 2008/01/16 MH We can only know RF type in the function. So we have to init
2300 // DIG RATR table again.
2301 init_rate_adaptive(dev
);
2303 //1 Make a copy for following variables and we can change them if we want
2305 if(priv
->RegChannelPlan
== 0xf)
2307 priv
->ChannelPlan
= priv
->eeprom_ChannelPlan
;
2311 priv
->ChannelPlan
= priv
->RegChannelPlan
;
2315 // Used PID and DID to Set CustomerID
2317 if( priv
->eeprom_vid
== 0x1186 && priv
->eeprom_did
== 0x3304 )
2319 priv
->CustomerID
= RT_CID_DLINK
;
2322 switch(priv
->eeprom_CustomerID
)
2324 case EEPROM_CID_DEFAULT
:
2325 priv
->CustomerID
= RT_CID_DEFAULT
;
2327 case EEPROM_CID_CAMEO
:
2328 priv
->CustomerID
= RT_CID_819x_CAMEO
;
2330 case EEPROM_CID_RUNTOP
:
2331 priv
->CustomerID
= RT_CID_819x_RUNTOP
;
2333 case EEPROM_CID_NetCore
:
2334 priv
->CustomerID
= RT_CID_819x_Netcore
;
2336 case EEPROM_CID_TOSHIBA
: // Merge by Jacken, 2008/01/31
2337 priv
->CustomerID
= RT_CID_TOSHIBA
;
2338 if(priv
->eeprom_ChannelPlan
&0x80)
2339 priv
->ChannelPlan
= priv
->eeprom_ChannelPlan
&0x7f;
2341 priv
->ChannelPlan
= 0x0;
2342 RT_TRACE(COMP_INIT
, "Toshiba ChannelPlan = 0x%x\n",
2345 case EEPROM_CID_Nettronix
:
2346 priv
->CustomerID
= RT_CID_Nettronix
;
2348 case EEPROM_CID_Pronet
:
2349 priv
->CustomerID
= RT_CID_PRONET
;
2351 case EEPROM_CID_DLINK
:
2352 priv
->CustomerID
= RT_CID_DLINK
;
2355 case EEPROM_CID_WHQL
:
2358 // value from RegCustomerID
2362 //Avoid the channel plan array overflow, by Bruce, 2007-08-27.
2363 if(priv
->ChannelPlan
> CHANNEL_PLAN_LEN
- 1)
2364 priv
->ChannelPlan
= 0; //FCC
2366 if( priv
->eeprom_vid
== 0x1186 && priv
->eeprom_did
== 0x3304)
2367 priv
->ieee80211
->bSupportRemoteWakeUp
= true;
2369 priv
->ieee80211
->bSupportRemoteWakeUp
= false;
2372 RT_TRACE(COMP_INIT
, "RegChannelPlan(%d)\n", priv
->RegChannelPlan
);
2373 RT_TRACE(COMP_INIT
, "ChannelPlan = %d\n", priv
->ChannelPlan
);
2374 RT_TRACE(COMP_TRACE
, "<==== ReadAdapterInfo\n");
2378 static short rtl8192_get_channel_map(struct r8192_priv
*priv
)
2380 #ifdef ENABLE_DOT11D
2381 if(priv
->ChannelPlan
> COUNTRY_CODE_GLOBAL_DOMAIN
){
2382 printk("rtl8180_init:Error channel plan! Set to default.\n");
2383 priv
->ChannelPlan
= 0;
2385 RT_TRACE(COMP_INIT
, "Channel plan is %d\n",priv
->ChannelPlan
);
2387 rtl819x_set_channel_map(priv
->ChannelPlan
, priv
);
2390 //Set Default Channel Plan
2392 DMESG("No channels, aborting");
2396 priv
->ChannelPlan
= 0;//hikaru
2397 // set channels 1..14 allowed in given locale
2398 for (i
=1; i
<=14; i
++) {
2399 (priv
->ieee80211
->channel_map
)[i
] = (u8
)(ch
& 0x01);
2406 static short rtl8192_init(struct r8192_priv
*priv
)
2408 struct net_device
*dev
= priv
->ieee80211
->dev
;
2410 memset(&(priv
->stats
),0,sizeof(struct Stats
));
2411 rtl8192_init_priv_variable(priv
);
2412 rtl8192_init_priv_lock(priv
);
2413 rtl8192_init_priv_task(priv
);
2414 rtl8192_get_eeprom_size(priv
);
2415 rtl8192_read_eeprom_info(priv
);
2416 rtl8192_get_channel_map(priv
);
2418 init_timer(&priv
->watch_dog_timer
);
2419 priv
->watch_dog_timer
.data
= (unsigned long)priv
;
2420 priv
->watch_dog_timer
.function
= watch_dog_timer_callback
;
2421 if (request_irq(dev
->irq
, rtl8192_interrupt
, IRQF_SHARED
, dev
->name
, dev
)) {
2422 printk("Error allocating IRQ %d",dev
->irq
);
2426 printk("IRQ %d",dev
->irq
);
2428 if (rtl8192_pci_initdescring(priv
) != 0){
2429 printk("Endopoints initialization failed");
2437 * Actually only set RRSR, RATR and BW_OPMODE registers
2438 * not to do all the hw config as its name says
2439 * This part need to modified according to the rate set we filtered
2441 static void rtl8192_hwconfig(struct r8192_priv
*priv
)
2443 u32 regRATR
= 0, regRRSR
= 0;
2444 u8 regBwOpMode
= 0, regTmp
= 0;
2446 // Set RRSR, RATR, and BW_OPMODE registers
2448 switch (priv
->ieee80211
->mode
)
2450 case WIRELESS_MODE_B
:
2451 regBwOpMode
= BW_OPMODE_20MHZ
;
2452 regRATR
= RATE_ALL_CCK
;
2453 regRRSR
= RATE_ALL_CCK
;
2455 case WIRELESS_MODE_A
:
2456 regBwOpMode
= BW_OPMODE_5G
|BW_OPMODE_20MHZ
;
2457 regRATR
= RATE_ALL_OFDM_AG
;
2458 regRRSR
= RATE_ALL_OFDM_AG
;
2460 case WIRELESS_MODE_G
:
2461 regBwOpMode
= BW_OPMODE_20MHZ
;
2462 regRATR
= RATE_ALL_CCK
| RATE_ALL_OFDM_AG
;
2463 regRRSR
= RATE_ALL_CCK
| RATE_ALL_OFDM_AG
;
2465 case WIRELESS_MODE_AUTO
:
2466 case WIRELESS_MODE_N_24G
:
2467 // It support CCK rate by default.
2468 // CCK rate will be filtered out only when associated AP does not support it.
2469 regBwOpMode
= BW_OPMODE_20MHZ
;
2470 regRATR
= RATE_ALL_CCK
| RATE_ALL_OFDM_AG
| RATE_ALL_OFDM_1SS
| RATE_ALL_OFDM_2SS
;
2471 regRRSR
= RATE_ALL_CCK
| RATE_ALL_OFDM_AG
;
2473 case WIRELESS_MODE_N_5G
:
2474 regBwOpMode
= BW_OPMODE_5G
;
2475 regRATR
= RATE_ALL_OFDM_AG
| RATE_ALL_OFDM_1SS
| RATE_ALL_OFDM_2SS
;
2476 regRRSR
= RATE_ALL_OFDM_AG
;
2480 write_nic_byte(priv
, BW_OPMODE
, regBwOpMode
);
2483 ratr_value
= regRATR
;
2484 if (priv
->rf_type
== RF_1T2R
)
2486 ratr_value
&= ~(RATE_ALL_OFDM_2SS
);
2488 write_nic_dword(priv
, RATR0
, ratr_value
);
2489 write_nic_byte(priv
, UFWP
, 1);
2491 regTmp
= read_nic_byte(priv
, 0x313);
2492 regRRSR
= ((regTmp
) << 24) | (regRRSR
& 0x00ffffff);
2493 write_nic_dword(priv
, RRSR
, regRRSR
);
2496 // Set Retry Limit here
2498 write_nic_word(priv
, RETRY_LIMIT
,
2499 priv
->ShortRetryLimit
<< RETRY_LIMIT_SHORT_SHIFT
|
2500 priv
->LongRetryLimit
<< RETRY_LIMIT_LONG_SHIFT
);
2501 // Set Contention Window here
2505 // Set Tx Antenna including Feedback control
2507 // Set Auto Rate fallback control
2513 static RT_STATUS
rtl8192_adapter_start(struct r8192_priv
*priv
)
2515 struct net_device
*dev
= priv
->ieee80211
->dev
;
2517 RT_STATUS rtStatus
= RT_STATUS_SUCCESS
;
2519 u8 ICVersion
,SwitchingRegulatorOutput
;
2520 bool bfirmwareok
= true;
2521 u32 tmpRegA
, tmpRegC
, TempCCk
;
2524 RT_TRACE(COMP_INIT
, "====>%s()\n", __FUNCTION__
);
2525 priv
->being_init_adapter
= true;
2526 rtl8192_pci_resetdescring(priv
);
2527 // 2007/11/02 MH Before initalizing RF. We can not use FW to do RF-R/W.
2528 priv
->Rf_Mode
= RF_OP_By_SW_3wire
;
2531 if(priv
->ResetProgress
== RESET_TYPE_NORESET
)
2533 write_nic_byte(priv
, ANAPAR
, 0x37);
2534 // Accordign to designer's explain, LBUS active will never > 10ms. We delay 10ms
2535 // Joseph increae the time to prevent firmware download fail
2539 //PlatformSleepUs(10000);
2540 // For any kind of InitializeAdapter process, we shall use system now!!
2541 priv
->pFirmware
->firmware_status
= FW_STATUS_0_INIT
;
2544 //3 //Config CPUReset Register
2546 //3 Firmware Reset Or Not
2547 ulRegRead
= read_nic_dword(priv
, CPU_GEN
);
2548 if(priv
->pFirmware
->firmware_status
== FW_STATUS_0_INIT
)
2549 { //called from MPInitialized. do nothing
2550 ulRegRead
|= CPU_GEN_SYSTEM_RESET
;
2551 }else if(priv
->pFirmware
->firmware_status
== FW_STATUS_5_READY
)
2552 ulRegRead
|= CPU_GEN_FIRMWARE_RESET
; // Called from MPReset
2554 RT_TRACE(COMP_ERR
, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__
, priv
->pFirmware
->firmware_status
);
2556 write_nic_dword(priv
, CPU_GEN
, ulRegRead
);
2559 //3 //Fix the issue of E-cut high temperature issue
2562 ICVersion
= read_nic_byte(priv
, IC_VERRSION
);
2563 if(ICVersion
>= 0x4) //E-cut only
2565 // HW SD suggest that we should not wirte this register too often, so driver
2566 // should readback this register. This register will be modified only when
2568 SwitchingRegulatorOutput
= read_nic_byte(priv
, SWREGULATOR
);
2569 if(SwitchingRegulatorOutput
!= 0xb8)
2571 write_nic_byte(priv
, SWREGULATOR
, 0xa8);
2573 write_nic_byte(priv
, SWREGULATOR
, 0xb8);
2578 //3// Initialize BB before MAC
2580 RT_TRACE(COMP_INIT
, "BB Config Start!\n");
2581 rtStatus
= rtl8192_BBConfig(priv
);
2582 if(rtStatus
!= RT_STATUS_SUCCESS
)
2584 RT_TRACE(COMP_ERR
, "BB Config failed\n");
2587 RT_TRACE(COMP_INIT
,"BB Config Finished!\n");
2589 //3//Set Loopback mode or Normal mode
2591 //2006.12.13 by emily. Note!We should not merge these two CPU_GEN register writings
2592 // because setting of System_Reset bit reset MAC to default transmission mode.
2593 //Loopback mode or not
2594 priv
->LoopbackMode
= RTL819X_NO_LOOPBACK
;
2595 if(priv
->ResetProgress
== RESET_TYPE_NORESET
)
2597 ulRegRead
= read_nic_dword(priv
, CPU_GEN
);
2598 if(priv
->LoopbackMode
== RTL819X_NO_LOOPBACK
)
2600 ulRegRead
= ((ulRegRead
& CPU_GEN_NO_LOOPBACK_MSK
) | CPU_GEN_NO_LOOPBACK_SET
);
2602 else if (priv
->LoopbackMode
== RTL819X_MAC_LOOPBACK
)
2604 ulRegRead
|= CPU_CCK_LOOPBACK
;
2608 RT_TRACE(COMP_ERR
,"Serious error: wrong loopback mode setting\n");
2611 //2008.06.03, for WOL
2612 //ulRegRead &= (~(CPU_GEN_GPIO_UART));
2613 write_nic_dword(priv
, CPU_GEN
, ulRegRead
);
2615 // 2006.11.29. After reset cpu, we sholud wait for a second, otherwise, it may fail to write registers. Emily
2618 //3Set Hardware(Do nothing now)
2619 rtl8192_hwconfig(priv
);
2620 //2=======================================================
2621 // Common Setting for all of the FPGA platform. (part 1)
2622 //2=======================================================
2623 // If there is changes, please make sure it applies to all of the FPGA version
2625 write_nic_byte(priv
, CMDR
, CR_RE
|CR_TE
);
2628 write_nic_byte(priv
, PCIF
, ((MXDMA2_NoLimit
<<MXDMA2_RX_SHIFT
) |
2629 (MXDMA2_NoLimit
<<MXDMA2_TX_SHIFT
) ));
2632 write_nic_dword(priv
, MAC0
, ((u32
*)dev
->dev_addr
)[0]);
2633 write_nic_word(priv
, MAC4
, ((u16
*)(dev
->dev_addr
+ 4))[0]);
2635 write_nic_dword(priv
, RCR
, priv
->ReceiveConfig
);
2637 //3 Initialize Number of Reserved Pages in Firmware Queue
2638 write_nic_dword(priv
, RQPN1
, NUM_OF_PAGE_IN_FW_QUEUE_BK
<< RSVD_FW_QUEUE_PAGE_BK_SHIFT
|
2639 NUM_OF_PAGE_IN_FW_QUEUE_BE
<< RSVD_FW_QUEUE_PAGE_BE_SHIFT
|
2640 NUM_OF_PAGE_IN_FW_QUEUE_VI
<< RSVD_FW_QUEUE_PAGE_VI_SHIFT
|
2641 NUM_OF_PAGE_IN_FW_QUEUE_VO
<<RSVD_FW_QUEUE_PAGE_VO_SHIFT
);
2642 write_nic_dword(priv
, RQPN2
, NUM_OF_PAGE_IN_FW_QUEUE_MGNT
<< RSVD_FW_QUEUE_PAGE_MGNT_SHIFT
);
2643 write_nic_dword(priv
, RQPN3
, APPLIED_RESERVED_QUEUE_IN_FW
|
2644 NUM_OF_PAGE_IN_FW_QUEUE_BCN
<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
|
2645 NUM_OF_PAGE_IN_FW_QUEUE_PUB
<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT
);
2647 rtl8192_tx_enable(priv
);
2648 rtl8192_rx_enable(priv
);
2649 //3Set Response Rate Setting Register
2650 // CCK rate is supported by default.
2651 // CCK rate will be filtered out only when associated AP does not support it.
2652 ulRegRead
= (0xFFF00000 & read_nic_dword(priv
, RRSR
)) | RATE_ALL_OFDM_AG
| RATE_ALL_CCK
;
2653 write_nic_dword(priv
, RRSR
, ulRegRead
);
2654 write_nic_dword(priv
, RATR0
+4*7, (RATE_ALL_OFDM_AG
| RATE_ALL_CCK
));
2657 // TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
2658 write_nic_byte(priv
, ACK_TIMEOUT
, 0x30);
2660 if(priv
->ResetProgress
== RESET_TYPE_NORESET
)
2661 rtl8192_SetWirelessMode(dev
, priv
->ieee80211
->mode
);
2662 //-----------------------------------------------------------------------------
2663 // Set up security related. 070106, by rcnjko:
2664 // 1. Clear all H/W keys.
2665 // 2. Enable H/W encryption/decryption.
2666 //-----------------------------------------------------------------------------
2667 CamResetAllEntry(priv
);
2669 u8 SECR_value
= 0x0;
2670 SECR_value
|= SCR_TxEncEnable
;
2671 SECR_value
|= SCR_RxDecEnable
;
2672 SECR_value
|= SCR_NoSKMC
;
2673 write_nic_byte(priv
, SECR
, SECR_value
);
2676 write_nic_word(priv
, ATIMWND
, 2);
2677 write_nic_word(priv
, BCN_INTERVAL
, 100);
2678 for (i
=0; i
<QOS_QUEUE_NUM
; i
++)
2679 write_nic_dword(priv
, WDCAPARA_ADD
[i
], 0x005e4332);
2681 // Switching regulator controller: This is set temporarily.
2682 // It's not sure if this can be removed in the future.
2683 // PJ advised to leave it by default.
2685 write_nic_byte(priv
, 0xbe, 0xc0);
2687 //2=======================================================
2688 // Set PHY related configuration defined in MAC register bank
2689 //2=======================================================
2690 rtl8192_phy_configmac(priv
);
2692 if (priv
->card_8192_version
> (u8
) VERSION_8190_BD
) {
2693 rtl8192_phy_getTxPower(priv
);
2694 rtl8192_phy_setTxPower(priv
, priv
->chan
);
2698 tmpvalue
= read_nic_byte(priv
, IC_VERRSION
);
2699 priv
->IC_Cut
= tmpvalue
;
2700 RT_TRACE(COMP_INIT
, "priv->IC_Cut = 0x%x\n", priv
->IC_Cut
);
2701 if(priv
->IC_Cut
>= IC_VersionCut_D
)
2703 //pHalData->bDcut = TRUE;
2704 if(priv
->IC_Cut
== IC_VersionCut_D
)
2705 RT_TRACE(COMP_INIT
, "D-cut\n");
2706 if(priv
->IC_Cut
== IC_VersionCut_E
)
2708 RT_TRACE(COMP_INIT
, "E-cut\n");
2709 // HW SD suggest that we should not wirte this register too often, so driver
2710 // should readback this register. This register will be modified only when
2716 //pHalData->bDcut = FALSE;
2717 RT_TRACE(COMP_INIT
, "Before C-cut\n");
2721 RT_TRACE(COMP_INIT
, "Load Firmware!\n");
2722 bfirmwareok
= init_firmware(dev
);
2723 if(bfirmwareok
!= true) {
2724 rtStatus
= RT_STATUS_FAILURE
;
2727 RT_TRACE(COMP_INIT
, "Load Firmware finished!\n");
2730 if(priv
->ResetProgress
== RESET_TYPE_NORESET
)
2732 RT_TRACE(COMP_INIT
, "RF Config Started!\n");
2733 rtStatus
= rtl8192_phy_RFConfig(priv
);
2734 if(rtStatus
!= RT_STATUS_SUCCESS
)
2736 RT_TRACE(COMP_ERR
, "RF Config failed\n");
2739 RT_TRACE(COMP_INIT
, "RF Config Finished!\n");
2741 rtl8192_phy_updateInitGain(priv
);
2743 /*---- Set CCK and OFDM Block "ON"----*/
2744 rtl8192_setBBreg(priv
, rFPGA0_RFMOD
, bCCKEn
, 0x1);
2745 rtl8192_setBBreg(priv
, rFPGA0_RFMOD
, bOFDMEn
, 0x1);
2748 write_nic_byte(priv
, 0x87, 0x0);
2750 //2=======================================================
2752 //2=======================================================
2756 if(priv
->RfOffReason
> RF_CHANGE_BY_PS
)
2757 { // H/W or S/W RF OFF before sleep.
2758 RT_TRACE((COMP_INIT
|COMP_RF
|COMP_POWER
), "%s(): Turn off RF for RfOffReason(%d)\n", __FUNCTION__
,priv
->RfOffReason
);
2759 MgntActSet_RF_State(priv
, eRfOff
, priv
->RfOffReason
);
2761 else if(priv
->RfOffReason
>= RF_CHANGE_BY_IPS
)
2762 { // H/W or S/W RF OFF before sleep.
2763 RT_TRACE((COMP_INIT
|COMP_RF
|COMP_POWER
), "%s(): Turn off RF for RfOffReason(%d)\n", __FUNCTION__
, priv
->RfOffReason
);
2764 MgntActSet_RF_State(priv
, eRfOff
, priv
->RfOffReason
);
2768 RT_TRACE((COMP_INIT
|COMP_RF
|COMP_POWER
), "%s(): RF-ON \n",__FUNCTION__
);
2769 priv
->eRFPowerState
= eRfOn
;
2770 priv
->RfOffReason
= 0;
2774 // We can force firmware to do RF-R/W
2775 if(priv
->ieee80211
->FwRWRF
)
2776 priv
->Rf_Mode
= RF_OP_By_FW
;
2778 priv
->Rf_Mode
= RF_OP_By_SW_3wire
;
2780 if(priv
->ResetProgress
== RESET_TYPE_NORESET
)
2782 dm_initialize_txpower_tracking(priv
);
2784 if(priv
->IC_Cut
>= IC_VersionCut_D
)
2786 tmpRegA
= rtl8192_QueryBBReg(priv
, rOFDM0_XATxIQImbalance
, bMaskDWord
);
2787 tmpRegC
= rtl8192_QueryBBReg(priv
, rOFDM0_XCTxIQImbalance
, bMaskDWord
);
2788 for(i
= 0; i
<TxBBGainTableLength
; i
++)
2790 if(tmpRegA
== priv
->txbbgain_table
[i
].txbbgain_value
)
2792 priv
->rfa_txpowertrackingindex
= (u8
)i
;
2793 priv
->rfa_txpowertrackingindex_real
= (u8
)i
;
2794 priv
->rfa_txpowertracking_default
= priv
->rfa_txpowertrackingindex
;
2799 TempCCk
= rtl8192_QueryBBReg(priv
, rCCK0_TxFilter1
, bMaskByte2
);
2801 for(i
=0 ; i
<CCKTxBBGainTableLength
; i
++)
2803 if(TempCCk
== priv
->cck_txbbgain_table
[i
].ccktxbb_valuearray
[0])
2805 priv
->CCKPresentAttentuation_20Mdefault
=(u8
) i
;
2809 priv
->CCKPresentAttentuation_40Mdefault
= 0;
2810 priv
->CCKPresentAttentuation_difference
= 0;
2811 priv
->CCKPresentAttentuation
= priv
->CCKPresentAttentuation_20Mdefault
;
2812 RT_TRACE(COMP_POWER_TRACKING
, "priv->rfa_txpowertrackingindex_initial = %d\n", priv
->rfa_txpowertrackingindex
);
2813 RT_TRACE(COMP_POWER_TRACKING
, "priv->rfa_txpowertrackingindex_real__initial = %d\n", priv
->rfa_txpowertrackingindex_real
);
2814 RT_TRACE(COMP_POWER_TRACKING
, "priv->CCKPresentAttentuation_difference_initial = %d\n", priv
->CCKPresentAttentuation_difference
);
2815 RT_TRACE(COMP_POWER_TRACKING
, "priv->CCKPresentAttentuation_initial = %d\n", priv
->CCKPresentAttentuation
);
2816 priv
->btxpower_tracking
= FALSE
;//TEMPLY DISABLE
2820 rtl8192_irq_enable(priv
);
2821 priv
->being_init_adapter
= false;
2826 static void rtl8192_prepare_beacon(unsigned long arg
)
2828 struct r8192_priv
*priv
= (struct r8192_priv
*) arg
;
2829 struct sk_buff
*skb
;
2832 skb
= ieee80211_get_beacon(priv
->ieee80211
);
2833 tcb_desc
= (cb_desc
*)(skb
->cb
+ 8);
2834 /* prepare misc info for the beacon xmit */
2835 tcb_desc
->queue_index
= BEACON_QUEUE
;
2836 /* IBSS does not support HT yet, use 1M defaultly */
2837 tcb_desc
->data_rate
= 2;
2838 tcb_desc
->RATRIndex
= 7;
2839 tcb_desc
->bTxDisableRateFallBack
= 1;
2840 tcb_desc
->bTxUseDriverAssingedRate
= 1;
2842 skb_push(skb
, priv
->ieee80211
->tx_headroom
);
2844 rtl8192_tx(priv
, skb
);
2850 * configure registers for beacon tx and enables it via
2851 * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
2852 * be used to stop beacon transmission
2854 static void rtl8192_start_beacon(struct ieee80211_device
*ieee80211
)
2856 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
2857 struct ieee80211_network
*net
= &priv
->ieee80211
->current_network
;
2862 DMESG("Enabling beacon TX");
2863 rtl8192_irq_disable(priv
);
2864 //rtl8192_beacon_tx_enable(dev);
2867 write_nic_word(priv
, ATIMWND
, 2);
2869 /* Beacon interval (in unit of TU) */
2870 write_nic_word(priv
, BCN_INTERVAL
, net
->beacon_interval
);
2873 * DrvErlyInt (in unit of TU).
2874 * (Time to send interrupt to notify driver to c
2875 * hange beacon content)
2877 write_nic_word(priv
, BCN_DRV_EARLY_INT
, 10);
2880 * BcnDMATIM(in unit of us).
2881 * Indicates the time before TBTT to perform beacon queue DMA
2883 write_nic_word(priv
, BCN_DMATIME
, 256);
2886 * Force beacon frame transmission even after receiving
2887 * beacon frame from other ad hoc STA
2889 write_nic_byte(priv
, BCN_ERR_THRESH
, 100);
2891 /* Set CW and IFS */
2892 BcnTimeCfg
|= BcnCW
<<BCN_TCFG_CW_SHIFT
;
2893 BcnTimeCfg
|= BcnIFS
<<BCN_TCFG_IFS
;
2894 write_nic_word(priv
, BCN_TCFG
, BcnTimeCfg
);
2897 /* enable the interrupt for ad-hoc process */
2898 rtl8192_irq_enable(priv
);
2901 static bool HalRxCheckStuck8190Pci(struct r8192_priv
*priv
)
2903 u16 RegRxCounter
= read_nic_word(priv
, 0x130);
2904 bool bStuck
= FALSE
;
2906 RT_TRACE(COMP_RESET
,"%s(): RegRxCounter is %d,RxCounter is %d\n",__FUNCTION__
,RegRxCounter
,priv
->RxCounter
);
2907 // If rssi is small, we should check rx for long time because of bad rx.
2908 // or maybe it will continuous silent reset every 2 seconds.
2910 if(priv
->undecorated_smoothed_pwdb
>= (RateAdaptiveTH_High
+5))
2912 priv
->rx_chk_cnt
= 0; /* high rssi, check rx stuck right now. */
2914 else if(priv
->undecorated_smoothed_pwdb
< (RateAdaptiveTH_High
+5) &&
2915 ((priv
->CurrentChannelBW
!=HT_CHANNEL_WIDTH_20
&&priv
->undecorated_smoothed_pwdb
>=RateAdaptiveTH_Low_40M
) ||
2916 (priv
->CurrentChannelBW
==HT_CHANNEL_WIDTH_20
&&priv
->undecorated_smoothed_pwdb
>=RateAdaptiveTH_Low_20M
)) )
2919 if(priv
->rx_chk_cnt
< 2)
2925 priv
->rx_chk_cnt
= 0;
2928 else if(((priv
->CurrentChannelBW
!=HT_CHANNEL_WIDTH_20
&&priv
->undecorated_smoothed_pwdb
<RateAdaptiveTH_Low_40M
) ||
2929 (priv
->CurrentChannelBW
==HT_CHANNEL_WIDTH_20
&&priv
->undecorated_smoothed_pwdb
<RateAdaptiveTH_Low_20M
)) &&
2930 priv
->undecorated_smoothed_pwdb
>= VeryLowRSSI
)
2932 if(priv
->rx_chk_cnt
< 4)
2938 priv
->rx_chk_cnt
= 0;
2943 if(priv
->rx_chk_cnt
< 8)
2949 priv
->rx_chk_cnt
= 0;
2952 if(priv
->RxCounter
==RegRxCounter
)
2955 priv
->RxCounter
= RegRxCounter
;
2960 static RESET_TYPE
RxCheckStuck(struct r8192_priv
*priv
)
2963 if(HalRxCheckStuck8190Pci(priv
))
2965 RT_TRACE(COMP_RESET
, "RxStuck Condition\n");
2966 return RESET_TYPE_SILENT
;
2969 return RESET_TYPE_NORESET
;
2972 static RESET_TYPE
rtl819x_check_reset(struct r8192_priv
*priv
)
2974 RESET_TYPE RxResetType
= RESET_TYPE_NORESET
;
2975 RT_RF_POWER_STATE rfState
;
2977 rfState
= priv
->eRFPowerState
;
2979 if (rfState
!= eRfOff
&& (priv
->ieee80211
->iw_mode
!= IW_MODE_ADHOC
)) {
2981 * If driver is in the status of firmware download failure,
2982 * driver skips RF initialization and RF is in turned off state.
2983 * Driver should check whether Rx stuck and do silent reset. And
2984 * if driver is in firmware download failure status, driver
2985 * should initialize RF in the following silent reset procedure
2987 * Driver should not check RX stuck in IBSS mode because it is
2988 * required to set Check BSSID in order to send beacon, however,
2989 * if check BSSID is set, STA cannot hear any packet a all.
2991 RxResetType
= RxCheckStuck(priv
);
2994 RT_TRACE(COMP_RESET
, "%s(): RxResetType is %d\n", __FUNCTION__
, RxResetType
);
3000 static void InactivePsWorkItemCallback(struct r8192_priv
*priv
)
3002 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
3004 RT_TRACE(COMP_POWER
, "InactivePsWorkItemCallback() --------->\n");
3006 // This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
3007 // is really scheduled.
3008 // The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
3009 // previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
3010 // blocks the IPS procedure of switching RF.
3011 // By Bruce, 2007-12-25.
3013 pPSC
->bSwRfProcessing
= TRUE
;
3015 RT_TRACE(COMP_RF
, "InactivePsWorkItemCallback(): Set RF to %s.\n",
3016 pPSC
->eInactivePowerState
== eRfOff
?"OFF":"ON");
3019 MgntActSet_RF_State(priv
, pPSC
->eInactivePowerState
, RF_CHANGE_BY_IPS
);
3022 // To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
3024 pPSC
->bSwRfProcessing
= FALSE
;
3025 RT_TRACE(COMP_POWER
, "InactivePsWorkItemCallback() <---------\n");
3029 /* Change current and default preamble mode. */
3030 bool MgntActSet_802_11_PowerSaveMode(struct r8192_priv
*priv
, u8 rtPsMode
)
3033 // Currently, we do not change power save mode on IBSS mode.
3034 if(priv
->ieee80211
->iw_mode
== IW_MODE_ADHOC
)
3040 // <RJ_NOTE> If we make HW to fill up the PwrMgt bit for us,
3041 // some AP will not response to our mgnt frames with PwrMgt bit set,
3042 // e.g. cannot associate the AP.
3043 // So I commented out it. 2005.02.16, by rcnjko.
3045 // // Change device's power save mode.
3046 // Adapter->HalFunc.SetPSModeHandler( Adapter, rtPsMode );
3048 // Update power save mode configured.
3049 //RT_TRACE(COMP_LPS,"%s(): set ieee->ps = %x\n",__FUNCTION__,rtPsMode);
3050 if(!priv
->ps_force
) {
3051 priv
->ieee80211
->ps
= rtPsMode
;
3054 // Awake immediately
3055 if(priv
->ieee80211
->sta_sleep
!= 0 && rtPsMode
== IEEE80211_PS_DISABLED
)
3057 // Notify the AP we awke.
3058 rtl8192_hw_wakeup(priv
->ieee80211
->dev
);
3059 priv
->ieee80211
->sta_sleep
= 0;
3061 spin_lock(&priv
->ieee80211
->mgmt_tx_lock
);
3062 printk("LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData\n");
3063 ieee80211_sta_ps_send_null_frame(priv
->ieee80211
, 0);
3064 spin_unlock(&priv
->ieee80211
->mgmt_tx_lock
);
3070 /* Enter the leisure power save mode. */
3071 void LeisurePSEnter(struct ieee80211_device
*ieee80211
)
3073 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
3074 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
3076 if(!((priv
->ieee80211
->iw_mode
== IW_MODE_INFRA
) &&
3077 (priv
->ieee80211
->state
== IEEE80211_LINKED
)) ||
3078 (priv
->ieee80211
->iw_mode
== IW_MODE_ADHOC
) ||
3079 (priv
->ieee80211
->iw_mode
== IW_MODE_MASTER
))
3082 if (pPSC
->bLeisurePs
)
3084 // Idle for a while if we connect to AP a while ago.
3085 if(pPSC
->LpsIdleCount
>= RT_CHECK_FOR_HANG_PERIOD
) // 4 Sec
3088 if(priv
->ieee80211
->ps
== IEEE80211_PS_DISABLED
)
3090 MgntActSet_802_11_PowerSaveMode(priv
, IEEE80211_PS_MBCAST
|IEEE80211_PS_UNICAST
);
3095 pPSC
->LpsIdleCount
++;
3100 /* Leave leisure power save mode. */
3101 void LeisurePSLeave(struct ieee80211_device
*ieee80211
)
3103 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
3104 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
3106 if (pPSC
->bLeisurePs
)
3108 if(priv
->ieee80211
->ps
!= IEEE80211_PS_DISABLED
)
3110 // move to lps_wakecomplete()
3111 MgntActSet_802_11_PowerSaveMode(priv
, IEEE80211_PS_DISABLED
);
3119 /* Enter the inactive power save mode. RF will be off */
3120 void IPSEnter(struct r8192_priv
*priv
)
3122 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
3123 RT_RF_POWER_STATE rtState
;
3125 if (pPSC
->bInactivePs
)
3127 rtState
= priv
->eRFPowerState
;
3129 // Added by Bruce, 2007-12-25.
3130 // Do not enter IPS in the following conditions:
3131 // (1) RF is already OFF or Sleep
3132 // (2) bSwRfProcessing (indicates the IPS is still under going)
3133 // (3) Connectted (only disconnected can trigger IPS)
3134 // (4) IBSS (send Beacon)
3135 // (5) AP mode (send Beacon)
3137 if (rtState
== eRfOn
&& !pPSC
->bSwRfProcessing
3138 && (priv
->ieee80211
->state
!= IEEE80211_LINKED
) )
3140 RT_TRACE(COMP_RF
,"IPSEnter(): Turn off RF.\n");
3141 pPSC
->eInactivePowerState
= eRfOff
;
3142 // queue_work(priv->priv_wq,&(pPSC->InactivePsWorkItem));
3143 InactivePsWorkItemCallback(priv
);
3150 // Leave the inactive power save mode, RF will be on.
3151 // 2007.08.17, by shien chang.
3153 void IPSLeave(struct r8192_priv
*priv
)
3155 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
3156 RT_RF_POWER_STATE rtState
;
3158 if (pPSC
->bInactivePs
)
3160 rtState
= priv
->eRFPowerState
;
3161 if (rtState
!= eRfOn
&& !pPSC
->bSwRfProcessing
&& priv
->RfOffReason
<= RF_CHANGE_BY_IPS
)
3163 RT_TRACE(COMP_POWER
, "IPSLeave(): Turn on RF.\n");
3164 pPSC
->eInactivePowerState
= eRfOn
;
3165 InactivePsWorkItemCallback(priv
);
3170 void IPSLeave_wq(struct work_struct
*work
)
3172 struct ieee80211_device
*ieee
= container_of(work
, struct ieee80211_device
, ips_leave_wq
);
3173 struct net_device
*dev
= ieee
->dev
;
3175 struct r8192_priv
*priv
= (struct r8192_priv
*)ieee80211_priv(dev
);
3176 down(&priv
->ieee80211
->ips_sem
);
3178 up(&priv
->ieee80211
->ips_sem
);
3181 void ieee80211_ips_leave_wq(struct ieee80211_device
*ieee80211
)
3183 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
3184 RT_RF_POWER_STATE rtState
;
3185 rtState
= priv
->eRFPowerState
;
3187 if (priv
->PowerSaveControl
.bInactivePs
){
3188 if(rtState
== eRfOff
){
3189 if(priv
->RfOffReason
> RF_CHANGE_BY_IPS
)
3191 RT_TRACE(COMP_ERR
, "%s(): RF is OFF.\n",__FUNCTION__
);
3195 printk("=========>%s(): IPSLeave\n",__FUNCTION__
);
3196 queue_work(priv
->ieee80211
->wq
,&priv
->ieee80211
->ips_leave_wq
);
3201 //added by amy 090331 end
3202 void ieee80211_ips_leave(struct ieee80211_device
*ieee80211
)
3204 struct r8192_priv
*priv
= ieee80211_priv(ieee80211
->dev
);
3205 down(&ieee80211
->ips_sem
);
3207 up(&ieee80211
->ips_sem
);
3211 static void rtl819x_update_rxcounts(
3212 struct r8192_priv
*priv
,
3221 *TotalRxDataNum
= 0;
3223 SlotIndex
= (priv
->ieee80211
->LinkDetectInfo
.SlotIndex
++)%(priv
->ieee80211
->LinkDetectInfo
.SlotNum
);
3224 priv
->ieee80211
->LinkDetectInfo
.RxBcnNum
[SlotIndex
] = priv
->ieee80211
->LinkDetectInfo
.NumRecvBcnInPeriod
;
3225 priv
->ieee80211
->LinkDetectInfo
.RxDataNum
[SlotIndex
] = priv
->ieee80211
->LinkDetectInfo
.NumRecvDataInPeriod
;
3226 for( i
=0; i
<priv
->ieee80211
->LinkDetectInfo
.SlotNum
; i
++ ){
3227 *TotalRxBcnNum
+= priv
->ieee80211
->LinkDetectInfo
.RxBcnNum
[i
];
3228 *TotalRxDataNum
+= priv
->ieee80211
->LinkDetectInfo
.RxDataNum
[i
];
3233 static void rtl819x_watchdog_wqcallback(struct work_struct
*work
)
3235 struct delayed_work
*dwork
= container_of(work
,struct delayed_work
,work
);
3236 struct r8192_priv
*priv
= container_of(dwork
,struct r8192_priv
,watch_dog_wq
);
3237 struct net_device
*dev
= priv
->ieee80211
->dev
;
3238 struct ieee80211_device
* ieee
= priv
->ieee80211
;
3239 RESET_TYPE ResetType
= RESET_TYPE_NORESET
;
3240 bool bBusyTraffic
= false;
3241 bool bEnterPS
= false;
3243 if ((!priv
->up
) || priv
->bHwRadioOff
)
3248 hal_dm_watchdog(dev
);
3250 if(ieee
->actscanning
== false){
3251 if((ieee
->iw_mode
== IW_MODE_INFRA
) && (ieee
->state
== IEEE80211_NOLINK
) &&
3252 (priv
->eRFPowerState
== eRfOn
) && !ieee
->is_set_key
&&
3253 (!ieee
->proto_stoppping
) && !ieee
->wx_set_enc
){
3254 if (priv
->PowerSaveControl
.ReturnPoint
== IPS_CALLBACK_NONE
){
3260 {//to get busy traffic condition
3261 if(ieee
->state
== IEEE80211_LINKED
)
3263 if( ieee
->LinkDetectInfo
.NumRxOkInPeriod
> 100 ||
3264 ieee
->LinkDetectInfo
.NumTxOkInPeriod
> 100 ) {
3265 bBusyTraffic
= true;
3269 //added by amy for Leisure PS
3270 if( ((ieee
->LinkDetectInfo
.NumRxUnicastOkInPeriod
+ ieee
->LinkDetectInfo
.NumTxOkInPeriod
) > 8 ) ||
3271 (ieee
->LinkDetectInfo
.NumRxUnicastOkInPeriod
> 2) )
3280 // LeisurePS only work in infra mode.
3283 LeisurePSEnter(priv
->ieee80211
);
3287 LeisurePSLeave(priv
->ieee80211
);
3295 LeisurePSLeave(priv
->ieee80211
);
3299 ieee
->LinkDetectInfo
.NumRxOkInPeriod
= 0;
3300 ieee
->LinkDetectInfo
.NumTxOkInPeriod
= 0;
3301 ieee
->LinkDetectInfo
.NumRxUnicastOkInPeriod
= 0;
3302 ieee
->LinkDetectInfo
.bBusyTraffic
= bBusyTraffic
;
3306 //added by amy for AP roaming
3307 if(ieee
->state
== IEEE80211_LINKED
&& ieee
->iw_mode
== IW_MODE_INFRA
)
3309 u32 TotalRxBcnNum
= 0;
3310 u32 TotalRxDataNum
= 0;
3312 rtl819x_update_rxcounts(priv
, &TotalRxBcnNum
, &TotalRxDataNum
);
3313 if((TotalRxBcnNum
+TotalRxDataNum
) == 0)
3315 if (priv
->eRFPowerState
== eRfOff
)
3316 RT_TRACE(COMP_ERR
,"========>%s()\n",__FUNCTION__
);
3317 printk("===>%s(): AP is power off,connect another one\n",__FUNCTION__
);
3318 // Dot11d_Reset(dev);
3319 ieee
->state
= IEEE80211_ASSOCIATING
;
3320 notify_wx_assoc_event(priv
->ieee80211
);
3321 RemovePeerTS(priv
->ieee80211
,priv
->ieee80211
->current_network
.bssid
);
3322 ieee
->is_roaming
= true;
3323 ieee
->is_set_key
= false;
3324 ieee
->link_change(ieee
);
3325 queue_work(ieee
->wq
, &ieee
->associate_procedure_wq
);
3328 ieee
->LinkDetectInfo
.NumRecvBcnInPeriod
=0;
3329 ieee
->LinkDetectInfo
.NumRecvDataInPeriod
=0;
3331 //check if reset the driver
3332 if (priv
->watchdog_check_reset_cnt
++ >= 3 && !ieee
->is_roaming
&&
3333 priv
->watchdog_last_time
!= 1)
3335 ResetType
= rtl819x_check_reset(priv
);
3336 priv
->watchdog_check_reset_cnt
= 3;
3338 if(!priv
->bDisableNormalResetCheck
&& ResetType
== RESET_TYPE_NORMAL
)
3340 priv
->ResetProgress
= RESET_TYPE_NORMAL
;
3341 RT_TRACE(COMP_RESET
,"%s(): NOMAL RESET\n",__FUNCTION__
);
3344 /* disable silent reset temply 2008.9.11*/
3346 if( ((priv
->force_reset
) || (!priv
->bDisableNormalResetCheck
&& ResetType
==RESET_TYPE_SILENT
))) // This is control by OID set in Pomelo
3348 priv
->watchdog_last_time
= 1;
3351 priv
->watchdog_last_time
= 0;
3353 priv
->force_reset
= false;
3354 priv
->bForcedSilentReset
= false;
3355 priv
->bResetInProgress
= false;
3356 RT_TRACE(COMP_TRACE
, " <==RtUsbCheckForHangWorkItemCallback()\n");
3360 void watch_dog_timer_callback(unsigned long data
)
3362 struct r8192_priv
*priv
= (struct r8192_priv
*) data
;
3363 queue_delayed_work(priv
->priv_wq
,&priv
->watch_dog_wq
,0);
3364 mod_timer(&priv
->watch_dog_timer
, jiffies
+ MSECS(IEEE80211_WATCH_DOG_TIME
));
3368 static int _rtl8192_up(struct r8192_priv
*priv
)
3370 RT_STATUS init_status
= RT_STATUS_SUCCESS
;
3371 struct net_device
*dev
= priv
->ieee80211
->dev
;
3374 priv
->ieee80211
->ieee_up
=1;
3375 priv
->bdisable_nic
= false; //YJ,add,091111
3376 RT_TRACE(COMP_INIT
, "Bringing up iface\n");
3378 init_status
= rtl8192_adapter_start(priv
);
3379 if(init_status
!= RT_STATUS_SUCCESS
)
3381 RT_TRACE(COMP_ERR
,"ERR!!! %s(): initialization is failed!\n",__FUNCTION__
);
3384 RT_TRACE(COMP_INIT
, "start adapter finished\n");
3386 if (priv
->eRFPowerState
!= eRfOn
)
3387 MgntActSet_RF_State(priv
, eRfOn
, priv
->RfOffReason
);
3389 if(priv
->ieee80211
->state
!= IEEE80211_LINKED
)
3390 ieee80211_softmac_start_protocol(priv
->ieee80211
);
3391 ieee80211_reset_queue(priv
->ieee80211
);
3392 watch_dog_timer_callback((unsigned long) priv
);
3393 if(!netif_queue_stopped(dev
))
3394 netif_start_queue(dev
);
3396 netif_wake_queue(dev
);
3402 static int rtl8192_open(struct net_device
*dev
)
3404 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3407 down(&priv
->wx_sem
);
3408 ret
= rtl8192_up(dev
);
3415 int rtl8192_up(struct net_device
*dev
)
3417 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3419 if (priv
->up
== 1) return -1;
3421 return _rtl8192_up(priv
);
3425 static int rtl8192_close(struct net_device
*dev
)
3427 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3430 down(&priv
->wx_sem
);
3432 ret
= rtl8192_down(dev
);
3440 int rtl8192_down(struct net_device
*dev
)
3442 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3444 if (priv
->up
== 0) return -1;
3447 //LZM for PS-Poll AID issue. 090429
3448 if(priv
->ieee80211
->state
== IEEE80211_LINKED
)
3449 LeisurePSLeave(priv
->ieee80211
);
3453 priv
->ieee80211
->ieee_up
= 0;
3454 RT_TRACE(COMP_DOWN
, "==========>%s()\n", __FUNCTION__
);
3456 if (!netif_queue_stopped(dev
))
3457 netif_stop_queue(dev
);
3459 rtl8192_irq_disable(priv
);
3460 rtl8192_cancel_deferred_work(priv
);
3462 del_timer_sync(&priv
->watch_dog_timer
);
3464 ieee80211_softmac_stop_protocol(priv
->ieee80211
,true);
3466 rtl8192_halt_adapter(priv
, false);
3467 memset(&priv
->ieee80211
->current_network
, 0 , offsetof(struct ieee80211_network
, list
));
3469 RT_TRACE(COMP_DOWN
, "<==========%s()\n", __FUNCTION__
);
3475 void rtl8192_commit(struct r8192_priv
*priv
)
3477 if (priv
->up
== 0) return ;
3480 ieee80211_softmac_stop_protocol(priv
->ieee80211
,true);
3482 rtl8192_irq_disable(priv
);
3483 rtl8192_halt_adapter(priv
, true);
3487 static void rtl8192_restart(struct work_struct
*work
)
3489 struct r8192_priv
*priv
= container_of(work
, struct r8192_priv
, reset_wq
);
3491 down(&priv
->wx_sem
);
3493 rtl8192_commit(priv
);
3498 static void r8192_set_multicast(struct net_device
*dev
)
3500 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3502 priv
->promisc
= (dev
->flags
& IFF_PROMISC
) ? 1 : 0;
3506 static int r8192_set_mac_adr(struct net_device
*dev
, void *mac
)
3508 struct r8192_priv
*priv
= ieee80211_priv(dev
);
3509 struct sockaddr
*addr
= mac
;
3511 down(&priv
->wx_sem
);
3513 memcpy(dev
->dev_addr
, addr
->sa_data
, ETH_ALEN
);
3515 schedule_work(&priv
->reset_wq
);
3521 static void r8192e_set_hw_key(struct r8192_priv
*priv
, struct ieee_param
*ipw
)
3523 struct ieee80211_device
*ieee
= priv
->ieee80211
;
3524 u8 broadcast_addr
[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
3527 if (ipw
->u
.crypt
.set_tx
) {
3528 if (strcmp(ipw
->u
.crypt
.alg
, "CCMP") == 0)
3529 ieee
->pairwise_key_type
= KEY_TYPE_CCMP
;
3530 else if (strcmp(ipw
->u
.crypt
.alg
, "TKIP") == 0)
3531 ieee
->pairwise_key_type
= KEY_TYPE_TKIP
;
3532 else if (strcmp(ipw
->u
.crypt
.alg
, "WEP") == 0) {
3533 if (ipw
->u
.crypt
.key_len
== 13)
3534 ieee
->pairwise_key_type
= KEY_TYPE_WEP104
;
3535 else if (ipw
->u
.crypt
.key_len
== 5)
3536 ieee
->pairwise_key_type
= KEY_TYPE_WEP40
;
3538 ieee
->pairwise_key_type
= KEY_TYPE_NA
;
3540 if (ieee
->pairwise_key_type
) {
3541 memcpy(key
, ipw
->u
.crypt
.key
, 16);
3542 EnableHWSecurityConfig8192(priv
);
3544 * We fill both index entry and 4th entry for pairwise
3545 * key as in IPW interface, adhoc will only get here,
3546 * so we need index entry for its default key serching!
3548 setKey(priv
, 4, ipw
->u
.crypt
.idx
,
3549 ieee
->pairwise_key_type
,
3550 (u8
*)ieee
->ap_mac_addr
, 0, key
);
3552 /* LEAP WEP will never set this. */
3553 if (ieee
->auth_mode
!= 2)
3554 setKey(priv
, ipw
->u
.crypt
.idx
, ipw
->u
.crypt
.idx
,
3555 ieee
->pairwise_key_type
,
3556 (u8
*)ieee
->ap_mac_addr
, 0, key
);
3558 if ((ieee
->pairwise_key_type
== KEY_TYPE_CCMP
) &&
3559 ieee
->pHTInfo
->bCurrentHTSupport
) {
3560 write_nic_byte(priv
, 0x173, 1); /* fix aes bug */
3563 memcpy(key
, ipw
->u
.crypt
.key
, 16);
3564 if (strcmp(ipw
->u
.crypt
.alg
, "CCMP") == 0)
3565 ieee
->group_key_type
= KEY_TYPE_CCMP
;
3566 else if (strcmp(ipw
->u
.crypt
.alg
, "TKIP") == 0)
3567 ieee
->group_key_type
= KEY_TYPE_TKIP
;
3568 else if (strcmp(ipw
->u
.crypt
.alg
, "WEP") == 0) {
3569 if (ipw
->u
.crypt
.key_len
== 13)
3570 ieee
->group_key_type
= KEY_TYPE_WEP104
;
3571 else if (ipw
->u
.crypt
.key_len
== 5)
3572 ieee
->group_key_type
= KEY_TYPE_WEP40
;
3574 ieee
->group_key_type
= KEY_TYPE_NA
;
3576 if (ieee
->group_key_type
) {
3577 setKey(priv
, ipw
->u
.crypt
.idx
, ipw
->u
.crypt
.idx
,
3578 ieee
->group_key_type
, broadcast_addr
, 0, key
);
3583 /* based on ipw2200 driver */
3584 static int rtl8192_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
3586 struct r8192_priv
*priv
= (struct r8192_priv
*)ieee80211_priv(dev
);
3587 struct iwreq
*wrq
= (struct iwreq
*)rq
;
3589 struct iw_point
*p
= &wrq
->u
.data
;
3590 struct ieee_param
*ipw
= NULL
;//(struct ieee_param *)wrq->u.data.pointer;
3592 down(&priv
->wx_sem
);
3595 if (p
->length
< sizeof(struct ieee_param
) || !p
->pointer
){
3600 ipw
= kmalloc(p
->length
, GFP_KERNEL
);
3605 if (copy_from_user(ipw
, p
->pointer
, p
->length
)) {
3612 case RTL_IOCTL_WPA_SUPPLICANT
:
3613 /* parse here for HW security */
3614 if (ipw
->cmd
== IEEE_CMD_SET_ENCRYPTION
)
3615 r8192e_set_hw_key(priv
, ipw
);
3616 ret
= ieee80211_wpa_supplicant_ioctl(priv
->ieee80211
, &wrq
->u
.data
);
3631 static u8
HwRateToMRate90(bool bIsHT
, u8 rate
)
3637 case DESC90_RATE1M
: ret_rate
= MGN_1M
; break;
3638 case DESC90_RATE2M
: ret_rate
= MGN_2M
; break;
3639 case DESC90_RATE5_5M
: ret_rate
= MGN_5_5M
; break;
3640 case DESC90_RATE11M
: ret_rate
= MGN_11M
; break;
3641 case DESC90_RATE6M
: ret_rate
= MGN_6M
; break;
3642 case DESC90_RATE9M
: ret_rate
= MGN_9M
; break;
3643 case DESC90_RATE12M
: ret_rate
= MGN_12M
; break;
3644 case DESC90_RATE18M
: ret_rate
= MGN_18M
; break;
3645 case DESC90_RATE24M
: ret_rate
= MGN_24M
; break;
3646 case DESC90_RATE36M
: ret_rate
= MGN_36M
; break;
3647 case DESC90_RATE48M
: ret_rate
= MGN_48M
; break;
3648 case DESC90_RATE54M
: ret_rate
= MGN_54M
; break;
3651 RT_TRACE(COMP_RECV
, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate
, bIsHT
);
3657 case DESC90_RATEMCS0
: ret_rate
= MGN_MCS0
; break;
3658 case DESC90_RATEMCS1
: ret_rate
= MGN_MCS1
; break;
3659 case DESC90_RATEMCS2
: ret_rate
= MGN_MCS2
; break;
3660 case DESC90_RATEMCS3
: ret_rate
= MGN_MCS3
; break;
3661 case DESC90_RATEMCS4
: ret_rate
= MGN_MCS4
; break;
3662 case DESC90_RATEMCS5
: ret_rate
= MGN_MCS5
; break;
3663 case DESC90_RATEMCS6
: ret_rate
= MGN_MCS6
; break;
3664 case DESC90_RATEMCS7
: ret_rate
= MGN_MCS7
; break;
3665 case DESC90_RATEMCS8
: ret_rate
= MGN_MCS8
; break;
3666 case DESC90_RATEMCS9
: ret_rate
= MGN_MCS9
; break;
3667 case DESC90_RATEMCS10
: ret_rate
= MGN_MCS10
; break;
3668 case DESC90_RATEMCS11
: ret_rate
= MGN_MCS11
; break;
3669 case DESC90_RATEMCS12
: ret_rate
= MGN_MCS12
; break;
3670 case DESC90_RATEMCS13
: ret_rate
= MGN_MCS13
; break;
3671 case DESC90_RATEMCS14
: ret_rate
= MGN_MCS14
; break;
3672 case DESC90_RATEMCS15
: ret_rate
= MGN_MCS15
; break;
3673 case DESC90_RATEMCS32
: ret_rate
= (0x80|0x20); break;
3676 RT_TRACE(COMP_RECV
, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n",rate
, bIsHT
);
3684 /* Record the TSF time stamp when receiving a packet */
3685 static void UpdateRxPktTimeStamp8190(struct r8192_priv
*priv
, struct ieee80211_rx_stats
*stats
)
3688 if(stats
->bIsAMPDU
&& !stats
->bFirstMPDU
) {
3689 stats
->mac_time
[0] = priv
->LastRxDescTSFLow
;
3690 stats
->mac_time
[1] = priv
->LastRxDescTSFHigh
;
3692 priv
->LastRxDescTSFLow
= stats
->mac_time
[0];
3693 priv
->LastRxDescTSFHigh
= stats
->mac_time
[1];
3697 static long rtl819x_translate_todbm(u8 signal_strength_index
)// 0-100 index.
3699 long signal_power
; // in dBm.
3701 // Translate to dBm (x=0.5y-95).
3702 signal_power
= (long)((signal_strength_index
+ 1) >> 1);
3705 return signal_power
;
3708 /* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
3709 be a local static. Otherwise, it may increase when we return from S3/S4. The
3710 value will be kept in memory or disk. We must delcare the value in adapter
3711 and it will be reinitialized when return from S3/S4. */
3712 static void rtl8192_process_phyinfo(struct r8192_priv
* priv
, u8
* buffer
,struct ieee80211_rx_stats
* pprevious_stats
, struct ieee80211_rx_stats
* pcurrent_stats
)
3714 bool bcheck
= false;
3716 u32 nspatial_stream
, tmp_val
;
3717 static u32 slide_rssi_index
=0, slide_rssi_statistics
=0;
3718 static u32 slide_evm_index
=0, slide_evm_statistics
=0;
3719 static u32 last_rssi
=0, last_evm
=0;
3720 //cosa add for beacon rssi smoothing
3721 static u32 slide_beacon_adc_pwdb_index
=0, slide_beacon_adc_pwdb_statistics
=0;
3722 static u32 last_beacon_adc_pwdb
=0;
3724 struct ieee80211_hdr_3addr
*hdr
;
3726 unsigned int frag
,seq
;
3727 hdr
= (struct ieee80211_hdr_3addr
*)buffer
;
3728 sc
= le16_to_cpu(hdr
->seq_ctl
);
3729 frag
= WLAN_GET_SEQ_FRAG(sc
);
3730 seq
= WLAN_GET_SEQ_SEQ(sc
);
3733 // Check whether we should take the previous packet into accounting
3735 if(!pprevious_stats
->bIsAMPDU
)
3737 // if previous packet is not aggregated packet
3741 if(slide_rssi_statistics
++ >= PHY_RSSI_SLID_WIN_MAX
)
3743 slide_rssi_statistics
= PHY_RSSI_SLID_WIN_MAX
;
3744 last_rssi
= priv
->stats
.slide_signal_strength
[slide_rssi_index
];
3745 priv
->stats
.slide_rssi_total
-= last_rssi
;
3747 priv
->stats
.slide_rssi_total
+= pprevious_stats
->SignalStrength
;
3749 priv
->stats
.slide_signal_strength
[slide_rssi_index
++] = pprevious_stats
->SignalStrength
;
3750 if(slide_rssi_index
>= PHY_RSSI_SLID_WIN_MAX
)
3751 slide_rssi_index
= 0;
3753 // <1> Showed on UI for user, in dbm
3754 tmp_val
= priv
->stats
.slide_rssi_total
/slide_rssi_statistics
;
3755 priv
->stats
.signal_strength
= rtl819x_translate_todbm((u8
)tmp_val
);
3756 pcurrent_stats
->rssi
= priv
->stats
.signal_strength
;
3758 // If the previous packet does not match the criteria, neglect it
3760 if(!pprevious_stats
->bPacketMatchBSSID
)
3762 if(!pprevious_stats
->bToSelfBA
)
3769 // <2> Showed on UI for engineering
3770 // hardware does not provide rssi information for each rf path in CCK
3771 if(!pprevious_stats
->bIsCCK
&& pprevious_stats
->bPacketToSelf
)
3773 for (rfpath
= RF90_PATH_A
; rfpath
< RF90_PATH_C
; rfpath
++)
3775 if (!rtl8192_phy_CheckIsLegalRFPath(priv
, rfpath
))
3777 RT_TRACE(COMP_DBG
, "pPreviousstats->RxMIMOSignalStrength[rfpath] = %d\n", pprevious_stats
->RxMIMOSignalStrength
[rfpath
]);
3778 //Fixed by Jacken 2008-03-20
3779 if(priv
->stats
.rx_rssi_percentage
[rfpath
] == 0)
3781 priv
->stats
.rx_rssi_percentage
[rfpath
] = pprevious_stats
->RxMIMOSignalStrength
[rfpath
];
3783 if(pprevious_stats
->RxMIMOSignalStrength
[rfpath
] > priv
->stats
.rx_rssi_percentage
[rfpath
])
3785 priv
->stats
.rx_rssi_percentage
[rfpath
] =
3786 ( (priv
->stats
.rx_rssi_percentage
[rfpath
]*(Rx_Smooth_Factor
-1)) +
3787 (pprevious_stats
->RxMIMOSignalStrength
[rfpath
])) /(Rx_Smooth_Factor
);
3788 priv
->stats
.rx_rssi_percentage
[rfpath
] = priv
->stats
.rx_rssi_percentage
[rfpath
] + 1;
3792 priv
->stats
.rx_rssi_percentage
[rfpath
] =
3793 ( (priv
->stats
.rx_rssi_percentage
[rfpath
]*(Rx_Smooth_Factor
-1)) +
3794 (pprevious_stats
->RxMIMOSignalStrength
[rfpath
])) /(Rx_Smooth_Factor
);
3796 RT_TRACE(COMP_DBG
, "priv->RxStats.RxRSSIPercentage[rfPath] = %d \n" , priv
->stats
.rx_rssi_percentage
[rfpath
]);
3804 //cosa add for beacon rssi smoothing by average.
3805 if(pprevious_stats
->bPacketBeacon
)
3807 /* record the beacon pwdb to the sliding window. */
3808 if(slide_beacon_adc_pwdb_statistics
++ >= PHY_Beacon_RSSI_SLID_WIN_MAX
)
3810 slide_beacon_adc_pwdb_statistics
= PHY_Beacon_RSSI_SLID_WIN_MAX
;
3811 last_beacon_adc_pwdb
= priv
->stats
.Slide_Beacon_pwdb
[slide_beacon_adc_pwdb_index
];
3812 priv
->stats
.Slide_Beacon_Total
-= last_beacon_adc_pwdb
;
3813 // slide_beacon_adc_pwdb_index, last_beacon_adc_pwdb, Adapter->RxStats.Slide_Beacon_Total);
3815 priv
->stats
.Slide_Beacon_Total
+= pprevious_stats
->RxPWDBAll
;
3816 priv
->stats
.Slide_Beacon_pwdb
[slide_beacon_adc_pwdb_index
] = pprevious_stats
->RxPWDBAll
;
3817 slide_beacon_adc_pwdb_index
++;
3818 if(slide_beacon_adc_pwdb_index
>= PHY_Beacon_RSSI_SLID_WIN_MAX
)
3819 slide_beacon_adc_pwdb_index
= 0;
3820 pprevious_stats
->RxPWDBAll
= priv
->stats
.Slide_Beacon_Total
/slide_beacon_adc_pwdb_statistics
;
3821 if(pprevious_stats
->RxPWDBAll
>= 3)
3822 pprevious_stats
->RxPWDBAll
-= 3;
3825 RT_TRACE(COMP_RXDESC
, "Smooth %s PWDB = %d\n",
3826 pprevious_stats
->bIsCCK
? "CCK": "OFDM",
3827 pprevious_stats
->RxPWDBAll
);
3829 if(pprevious_stats
->bPacketToSelf
|| pprevious_stats
->bPacketBeacon
|| pprevious_stats
->bToSelfBA
)
3831 if(priv
->undecorated_smoothed_pwdb
< 0) // initialize
3833 priv
->undecorated_smoothed_pwdb
= pprevious_stats
->RxPWDBAll
;
3836 if(pprevious_stats
->RxPWDBAll
> (u32
)priv
->undecorated_smoothed_pwdb
)
3838 priv
->undecorated_smoothed_pwdb
=
3839 ( ((priv
->undecorated_smoothed_pwdb
)*(Rx_Smooth_Factor
-1)) +
3840 (pprevious_stats
->RxPWDBAll
)) /(Rx_Smooth_Factor
);
3841 priv
->undecorated_smoothed_pwdb
= priv
->undecorated_smoothed_pwdb
+ 1;
3845 priv
->undecorated_smoothed_pwdb
=
3846 ( ((priv
->undecorated_smoothed_pwdb
)*(Rx_Smooth_Factor
-1)) +
3847 (pprevious_stats
->RxPWDBAll
)) /(Rx_Smooth_Factor
);
3854 /* record the general EVM to the sliding window. */
3855 if(pprevious_stats
->SignalQuality
== 0)
3860 if(pprevious_stats
->bPacketToSelf
|| pprevious_stats
->bPacketBeacon
|| pprevious_stats
->bToSelfBA
){
3861 if(slide_evm_statistics
++ >= PHY_RSSI_SLID_WIN_MAX
){
3862 slide_evm_statistics
= PHY_RSSI_SLID_WIN_MAX
;
3863 last_evm
= priv
->stats
.slide_evm
[slide_evm_index
];
3864 priv
->stats
.slide_evm_total
-= last_evm
;
3867 priv
->stats
.slide_evm_total
+= pprevious_stats
->SignalQuality
;
3869 priv
->stats
.slide_evm
[slide_evm_index
++] = pprevious_stats
->SignalQuality
;
3870 if(slide_evm_index
>= PHY_RSSI_SLID_WIN_MAX
)
3871 slide_evm_index
= 0;
3873 // <1> Showed on UI for user, in percentage.
3874 tmp_val
= priv
->stats
.slide_evm_total
/slide_evm_statistics
;
3875 //cosa add 10/11/2007, Showed on UI for user in Windows Vista, for Link quality.
3878 // <2> Showed on UI for engineering
3879 if(pprevious_stats
->bPacketToSelf
|| pprevious_stats
->bPacketBeacon
|| pprevious_stats
->bToSelfBA
)
3881 for(nspatial_stream
= 0; nspatial_stream
<2 ; nspatial_stream
++) // 2 spatial stream
3883 if(pprevious_stats
->RxMIMOSignalQuality
[nspatial_stream
] != -1)
3885 if(priv
->stats
.rx_evm_percentage
[nspatial_stream
] == 0) // initialize
3887 priv
->stats
.rx_evm_percentage
[nspatial_stream
] = pprevious_stats
->RxMIMOSignalQuality
[nspatial_stream
];
3889 priv
->stats
.rx_evm_percentage
[nspatial_stream
] =
3890 ( (priv
->stats
.rx_evm_percentage
[nspatial_stream
]* (Rx_Smooth_Factor
-1)) +
3891 (pprevious_stats
->RxMIMOSignalQuality
[nspatial_stream
]* 1)) / (Rx_Smooth_Factor
);
3899 static u8
rtl819x_query_rxpwrpercentage(
3903 if ((antpower
<= -100) || (antpower
>= 20))
3907 else if (antpower
>= 0)
3913 return (100+antpower
);
3919 rtl819x_evm_dbtopercentage(
3931 ret_val
= 0 - ret_val
;
3938 /* We want good-looking for signal strength/quality */
3939 static long rtl819x_signal_scale_mapping(long currsig
)
3943 // Step 1. Scale mapping.
3944 if(currsig
>= 61 && currsig
<= 100)
3946 retsig
= 90 + ((currsig
- 60) / 4);
3948 else if(currsig
>= 41 && currsig
<= 60)
3950 retsig
= 78 + ((currsig
- 40) / 2);
3952 else if(currsig
>= 31 && currsig
<= 40)
3954 retsig
= 66 + (currsig
- 30);
3956 else if(currsig
>= 21 && currsig
<= 30)
3958 retsig
= 54 + (currsig
- 20);
3960 else if(currsig
>= 5 && currsig
<= 20)
3962 retsig
= 42 + (((currsig
- 5) * 2) / 3);
3964 else if(currsig
== 4)
3968 else if(currsig
== 3)
3972 else if(currsig
== 2)
3976 else if(currsig
== 1)
3988 static void rtl8192_query_rxphystatus(
3989 struct r8192_priv
* priv
,
3990 struct ieee80211_rx_stats
* pstats
,
3991 prx_desc_819x_pci pdesc
,
3992 prx_fwinfo_819x_pci pdrvinfo
,
3993 struct ieee80211_rx_stats
* precord_stats
,
3994 bool bpacket_match_bssid
,
3995 bool bpacket_toself
,
4000 //PRT_RFD_STATUS pRtRfdStatus = &(pRfd->Status);
4001 phy_sts_ofdm_819xpci_t
* pofdm_buf
;
4002 phy_sts_cck_819xpci_t
* pcck_buf
;
4003 phy_ofdm_rx_status_rxsc_sgien_exintfflag
* prxsc
;
4005 u8 i
,max_spatial_stream
, tmp_rxsnr
, tmp_rxevm
, rxsc_sgien_exflg
;
4006 char rx_pwr
[4], rx_pwr_all
=0;
4007 //long rx_avg_pwr = 0;
4008 char rx_snrX
, rx_evmX
;
4010 u32 RSSI
, total_rssi
=0;//, total_evm=0;
4011 // long signal_strength_index = 0;
4015 is_cck_rate
= rx_hal_is_cck_rate(pdrvinfo
);
4017 // Record it for next packet processing
4018 memset(precord_stats
, 0, sizeof(struct ieee80211_rx_stats
));
4019 pstats
->bPacketMatchBSSID
= precord_stats
->bPacketMatchBSSID
= bpacket_match_bssid
;
4020 pstats
->bPacketToSelf
= precord_stats
->bPacketToSelf
= bpacket_toself
;
4021 pstats
->bIsCCK
= precord_stats
->bIsCCK
= is_cck_rate
;//RX_HAL_IS_CCK_RATE(pDrvInfo);
4022 pstats
->bPacketBeacon
= precord_stats
->bPacketBeacon
= bPacketBeacon
;
4023 pstats
->bToSelfBA
= precord_stats
->bToSelfBA
= bToSelfBA
;
4024 /*2007.08.30 requested by SD3 Jerry */
4025 if (priv
->phy_check_reg824
== 0)
4027 priv
->phy_reg824_bit9
= rtl8192_QueryBBReg(priv
, rFPGA0_XA_HSSIParameter2
, 0x200);
4028 priv
->phy_check_reg824
= 1;
4032 prxpkt
= (u8
*)pdrvinfo
;
4034 /* Move pointer to the 16th bytes. Phy status start address. */
4035 prxpkt
+= sizeof(rx_fwinfo_819x_pci
);
4037 /* Initial the cck and ofdm buffer pointer */
4038 pcck_buf
= (phy_sts_cck_819xpci_t
*)prxpkt
;
4039 pofdm_buf
= (phy_sts_ofdm_819xpci_t
*)prxpkt
;
4041 pstats
->RxMIMOSignalQuality
[0] = -1;
4042 pstats
->RxMIMOSignalQuality
[1] = -1;
4043 precord_stats
->RxMIMOSignalQuality
[0] = -1;
4044 precord_stats
->RxMIMOSignalQuality
[1] = -1;
4049 // (1)Hardware does not provide RSSI for CCK
4053 // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
4055 u8 report
;//, cck_agc_rpt;
4057 if (!priv
->phy_reg824_bit9
)
4059 report
= pcck_buf
->cck_agc_rpt
& 0xc0;
4063 //Fixed by Jacken from Bryant 2008-03-20
4064 //Original value is -38 , -26 , -14 , -2
4065 //Fixed value is -35 , -23 , -11 , 6
4067 rx_pwr_all
= -35 - (pcck_buf
->cck_agc_rpt
& 0x3e);
4070 rx_pwr_all
= -23 - (pcck_buf
->cck_agc_rpt
& 0x3e);
4073 rx_pwr_all
= -11 - (pcck_buf
->cck_agc_rpt
& 0x3e);
4076 rx_pwr_all
= 8 - (pcck_buf
->cck_agc_rpt
& 0x3e);
4082 report
= pcck_buf
->cck_agc_rpt
& 0x60;
4087 rx_pwr_all
= -35 - ((pcck_buf
->cck_agc_rpt
& 0x1f)<<1) ;
4090 rx_pwr_all
= -23 - ((pcck_buf
->cck_agc_rpt
& 0x1f)<<1);
4093 rx_pwr_all
= -11 - ((pcck_buf
->cck_agc_rpt
& 0x1f)<<1) ;
4096 rx_pwr_all
= -8 - ((pcck_buf
->cck_agc_rpt
& 0x1f)<<1) ;
4101 pwdb_all
= rtl819x_query_rxpwrpercentage(rx_pwr_all
);
4102 pstats
->RxPWDBAll
= precord_stats
->RxPWDBAll
= pwdb_all
;
4103 pstats
->RecvSignalPower
= rx_pwr_all
;
4106 // (3) Get Signal Quality (EVM)
4108 if(bpacket_match_bssid
)
4112 if(pstats
->RxPWDBAll
> 40)
4117 sq
= pcck_buf
->sq_rpt
;
4119 if(pcck_buf
->sq_rpt
> 64)
4121 else if (pcck_buf
->sq_rpt
< 20)
4124 sq
= ((64-sq
) * 100) / 44;
4126 pstats
->SignalQuality
= precord_stats
->SignalQuality
= sq
;
4127 pstats
->RxMIMOSignalQuality
[0] = precord_stats
->RxMIMOSignalQuality
[0] = sq
;
4128 pstats
->RxMIMOSignalQuality
[1] = precord_stats
->RxMIMOSignalQuality
[1] = -1;
4134 // (1)Get RSSI for HT rate
4136 for(i
=RF90_PATH_A
; i
<RF90_PATH_MAX
; i
++)
4138 // 2008/01/30 MH we will judge RF RX path now.
4139 if (priv
->brfpath_rxenable
[i
])
4144 //Fixed by Jacken from Bryant 2008-03-20
4145 //Original value is 106
4146 rx_pwr
[i
] = ((pofdm_buf
->trsw_gain_X
[i
]&0x3F)*2) - 110;
4148 //Get Rx snr value in DB
4149 tmp_rxsnr
= pofdm_buf
->rxsnr_X
[i
];
4150 rx_snrX
= (char)(tmp_rxsnr
);
4153 /* Translate DBM to percentage. */
4154 RSSI
= rtl819x_query_rxpwrpercentage(rx_pwr
[i
]);
4155 if (priv
->brfpath_rxenable
[i
])
4158 /* Record Signal Strength for next packet */
4159 if(bpacket_match_bssid
)
4161 pstats
->RxMIMOSignalStrength
[i
] =(u8
) RSSI
;
4162 precord_stats
->RxMIMOSignalStrength
[i
] =(u8
) RSSI
;
4168 // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
4170 //Fixed by Jacken from Bryant 2008-03-20
4171 //Original value is 106
4172 rx_pwr_all
= (((pofdm_buf
->pwdb_all
) >> 1 )& 0x7f) -106;
4173 pwdb_all
= rtl819x_query_rxpwrpercentage(rx_pwr_all
);
4175 pstats
->RxPWDBAll
= precord_stats
->RxPWDBAll
= pwdb_all
;
4176 pstats
->RxPower
= precord_stats
->RxPower
= rx_pwr_all
;
4177 pstats
->RecvSignalPower
= rx_pwr_all
;
4179 // (3)EVM of HT rate
4181 if(pdrvinfo
->RxHT
&& pdrvinfo
->RxRate
>=DESC90_RATEMCS8
&&
4182 pdrvinfo
->RxRate
<=DESC90_RATEMCS15
)
4183 max_spatial_stream
= 2; //both spatial stream make sense
4185 max_spatial_stream
= 1; //only spatial stream 1 makes sense
4187 for(i
=0; i
<max_spatial_stream
; i
++)
4189 tmp_rxevm
= pofdm_buf
->rxevm_X
[i
];
4190 rx_evmX
= (char)(tmp_rxevm
);
4192 // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
4193 // fill most significant bit to "zero" when doing shifting operation which may change a negative
4194 // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
4197 evm
= rtl819x_evm_dbtopercentage(rx_evmX
);
4198 if(bpacket_match_bssid
)
4200 if(i
==0) // Fill value in RFD, Get the first spatial stream only
4201 pstats
->SignalQuality
= precord_stats
->SignalQuality
= (u8
)(evm
& 0xff);
4202 pstats
->RxMIMOSignalQuality
[i
] = precord_stats
->RxMIMOSignalQuality
[i
] = (u8
)(evm
& 0xff);
4207 /* record rx statistics for debug */
4208 rxsc_sgien_exflg
= pofdm_buf
->rxsc_sgien_exflg
;
4209 prxsc
= (phy_ofdm_rx_status_rxsc_sgien_exintfflag
*)&rxsc_sgien_exflg
;
4212 //UI BSS List signal strength(in percentage), make it good looking, from 0~100.
4213 //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
4216 pstats
->SignalStrength
= precord_stats
->SignalStrength
= (u8
)(rtl819x_signal_scale_mapping((long)pwdb_all
));//PWDB_ALL;
4221 //pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u1Byte)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u1Byte)(total_rssi/=RF90_PATH_MAX);
4222 // We can judge RX path number now.
4224 pstats
->SignalStrength
= precord_stats
->SignalStrength
= (u8
)(rtl819x_signal_scale_mapping((long)(total_rssi
/=rf_rx_num
)));
4229 rtl8192_record_rxdesc_forlateruse(
4230 struct ieee80211_rx_stats
* psrc_stats
,
4231 struct ieee80211_rx_stats
* ptarget_stats
4234 ptarget_stats
->bIsAMPDU
= psrc_stats
->bIsAMPDU
;
4235 ptarget_stats
->bFirstMPDU
= psrc_stats
->bFirstMPDU
;
4240 static void TranslateRxSignalStuff819xpci(struct r8192_priv
*priv
,
4241 struct sk_buff
*skb
,
4242 struct ieee80211_rx_stats
* pstats
,
4243 prx_desc_819x_pci pdesc
,
4244 prx_fwinfo_819x_pci pdrvinfo
)
4246 // TODO: We must only check packet for current MAC address. Not finish
4247 bool bpacket_match_bssid
, bpacket_toself
;
4248 bool bPacketBeacon
=false, bToSelfBA
=false;
4249 struct ieee80211_hdr_3addr
*hdr
;
4252 // Get Signal Quality for only RX data queue (but not command queue)
4257 /* Get MAC frame start address. */
4258 tmp_buf
= skb
->data
;
4260 hdr
= (struct ieee80211_hdr_3addr
*)tmp_buf
;
4261 fc
= le16_to_cpu(hdr
->frame_ctl
);
4262 type
= WLAN_FC_GET_TYPE(fc
);
4263 praddr
= hdr
->addr1
;
4265 /* Check if the received packet is acceptabe. */
4266 bpacket_match_bssid
= ((IEEE80211_FTYPE_CTL
!= type
) &&
4267 (!compare_ether_addr(priv
->ieee80211
->current_network
.bssid
, (fc
& IEEE80211_FCTL_TODS
)? hdr
->addr1
: (fc
& IEEE80211_FCTL_FROMDS
)? hdr
->addr2
: hdr
->addr3
))
4268 && (!pstats
->bHwError
) && (!pstats
->bCRC
)&& (!pstats
->bICV
));
4269 bpacket_toself
= bpacket_match_bssid
& (!compare_ether_addr(praddr
, priv
->ieee80211
->dev
->dev_addr
));
4271 if(WLAN_FC_GET_FRAMETYPE(fc
)== IEEE80211_STYPE_BEACON
)
4273 bPacketBeacon
= true;
4275 if(WLAN_FC_GET_FRAMETYPE(fc
) == IEEE80211_STYPE_BLOCKACK
)
4277 if (!compare_ether_addr(praddr
, priv
->ieee80211
->dev
->dev_addr
))
4282 // Process PHY information for previous packet (RSSI/PWDB/EVM)
4284 // Because phy information is contained in the last packet of AMPDU only, so driver
4285 // should process phy information of previous packet
4286 rtl8192_process_phyinfo(priv
, tmp_buf
, &priv
->previous_stats
, pstats
);
4287 rtl8192_query_rxphystatus(priv
, pstats
, pdesc
, pdrvinfo
, &priv
->previous_stats
, bpacket_match_bssid
,
4288 bpacket_toself
,bPacketBeacon
, bToSelfBA
);
4289 rtl8192_record_rxdesc_forlateruse(pstats
, &priv
->previous_stats
);
4294 static void rtl8192_tx_resume(struct r8192_priv
*priv
)
4296 struct ieee80211_device
*ieee
= priv
->ieee80211
;
4297 struct net_device
*dev
= priv
->ieee80211
->dev
;
4298 struct sk_buff
*skb
;
4301 for (i
= BK_QUEUE
; i
< TXCMD_QUEUE
; i
++) {
4302 while ((!skb_queue_empty(&ieee
->skb_waitQ
[i
])) &&
4303 (priv
->ieee80211
->check_nic_enough_desc(dev
, i
) > 0)) {
4304 /* 1. dequeue the packet from the wait queue */
4305 skb
= skb_dequeue(&ieee
->skb_waitQ
[i
]);
4306 /* 2. tx the packet directly */
4307 ieee
->softmac_data_hard_start_xmit(skb
, ieee
, 0);
4312 static void rtl8192_irq_tx_tasklet(unsigned long arg
)
4314 struct r8192_priv
*priv
= (struct r8192_priv
*) arg
;
4315 struct rtl8192_tx_ring
*mgnt_ring
= &priv
->tx_ring
[MGNT_QUEUE
];
4316 struct net_device
*dev
= priv
->ieee80211
->dev
;
4317 unsigned long flags
;
4319 /* check if we need to report that the management queue is drained */
4320 spin_lock_irqsave(&priv
->irq_th_lock
, flags
);
4322 if (!skb_queue_len(&mgnt_ring
->queue
) &&
4323 priv
->ieee80211
->ack_tx_to_ieee
&&
4324 rtl8192_is_tx_queue_empty(dev
)) {
4325 priv
->ieee80211
->ack_tx_to_ieee
= 0;
4326 ieee80211_ps_tx_ack(priv
->ieee80211
, 1);
4329 spin_unlock_irqrestore(&priv
->irq_th_lock
, flags
);
4331 rtl8192_tx_resume(priv
);
4334 /* Record the received data rate */
4335 static void UpdateReceivedRateHistogramStatistics8190(
4336 struct r8192_priv
*priv
,
4337 struct ieee80211_rx_stats
* pstats
4340 u32 rcvType
=1; //0: Total, 1:OK, 2:CRC, 3:ICV
4342 u32 preamble_guardinterval
; //1: short preamble/GI, 0: long preamble/GI
4346 else if(pstats
->bICV
)
4349 if(pstats
->bShortPreamble
)
4350 preamble_guardinterval
= 1;// short
4352 preamble_guardinterval
= 0;// long
4354 switch(pstats
->rate
)
4359 case MGN_1M
: rateIndex
= 0; break;
4360 case MGN_2M
: rateIndex
= 1; break;
4361 case MGN_5_5M
: rateIndex
= 2; break;
4362 case MGN_11M
: rateIndex
= 3; break;
4366 case MGN_6M
: rateIndex
= 4; break;
4367 case MGN_9M
: rateIndex
= 5; break;
4368 case MGN_12M
: rateIndex
= 6; break;
4369 case MGN_18M
: rateIndex
= 7; break;
4370 case MGN_24M
: rateIndex
= 8; break;
4371 case MGN_36M
: rateIndex
= 9; break;
4372 case MGN_48M
: rateIndex
= 10; break;
4373 case MGN_54M
: rateIndex
= 11; break;
4375 // 11n High throughput rate
4377 case MGN_MCS0
: rateIndex
= 12; break;
4378 case MGN_MCS1
: rateIndex
= 13; break;
4379 case MGN_MCS2
: rateIndex
= 14; break;
4380 case MGN_MCS3
: rateIndex
= 15; break;
4381 case MGN_MCS4
: rateIndex
= 16; break;
4382 case MGN_MCS5
: rateIndex
= 17; break;
4383 case MGN_MCS6
: rateIndex
= 18; break;
4384 case MGN_MCS7
: rateIndex
= 19; break;
4385 case MGN_MCS8
: rateIndex
= 20; break;
4386 case MGN_MCS9
: rateIndex
= 21; break;
4387 case MGN_MCS10
: rateIndex
= 22; break;
4388 case MGN_MCS11
: rateIndex
= 23; break;
4389 case MGN_MCS12
: rateIndex
= 24; break;
4390 case MGN_MCS13
: rateIndex
= 25; break;
4391 case MGN_MCS14
: rateIndex
= 26; break;
4392 case MGN_MCS15
: rateIndex
= 27; break;
4393 default: rateIndex
= 28; break;
4395 priv
->stats
.received_rate_histogram
[0][rateIndex
]++; //total
4396 priv
->stats
.received_rate_histogram
[rcvType
][rateIndex
]++;
4399 static void rtl8192_rx(struct r8192_priv
*priv
)
4401 struct ieee80211_hdr_1addr
*ieee80211_hdr
= NULL
;
4402 bool unicast_packet
= false;
4403 struct ieee80211_rx_stats stats
= {
4407 .freq
= IEEE80211_24GHZ_BAND
,
4409 unsigned int count
= priv
->rxringcount
;
4410 prx_fwinfo_819x_pci pDrvInfo
= NULL
;
4411 struct sk_buff
*new_skb
;
4414 rx_desc_819x_pci
*pdesc
= &priv
->rx_ring
[priv
->rx_idx
];//rx descriptor
4415 struct sk_buff
*skb
= priv
->rx_buf
[priv
->rx_idx
];//rx pkt
4418 /* wait data to be filled by hardware */
4421 stats
.bICV
= pdesc
->ICV
;
4422 stats
.bCRC
= pdesc
->CRC32
;
4423 stats
.bHwError
= pdesc
->CRC32
| pdesc
->ICV
;
4425 stats
.Length
= pdesc
->Length
;
4426 if(stats
.Length
< 24)
4427 stats
.bHwError
|= 1;
4429 if(stats
.bHwError
) {
4430 stats
.bShift
= false;
4434 new_skb
= dev_alloc_skb(priv
->rxbuffersize
);
4436 if (unlikely(!new_skb
))
4439 stats
.RxDrvInfoSize
= pdesc
->RxDrvInfoSize
;
4440 stats
.RxBufShift
= ((pdesc
->Shift
)&0x03);
4441 stats
.Decrypted
= !pdesc
->SWDec
;
4443 pci_dma_sync_single_for_cpu(priv
->pdev
,
4444 *((dma_addr_t
*)skb
->cb
),
4446 PCI_DMA_FROMDEVICE
);
4447 skb_put(skb
, pdesc
->Length
);
4448 pDrvInfo
= (rx_fwinfo_819x_pci
*)(skb
->data
+ stats
.RxBufShift
);
4449 skb_reserve(skb
, stats
.RxDrvInfoSize
+ stats
.RxBufShift
);
4451 stats
.rate
= HwRateToMRate90((bool)pDrvInfo
->RxHT
, (u8
)pDrvInfo
->RxRate
);
4452 stats
.bShortPreamble
= pDrvInfo
->SPLCP
;
4454 /* it is debug only. It should be disabled in released driver.
4455 * 2007.1.11 by Emily
4457 UpdateReceivedRateHistogramStatistics8190(priv
, &stats
);
4459 stats
.bIsAMPDU
= (pDrvInfo
->PartAggr
==1);
4460 stats
.bFirstMPDU
= (pDrvInfo
->PartAggr
==1) && (pDrvInfo
->FirstAGGR
==1);
4462 stats
.TimeStampLow
= pDrvInfo
->TSFL
;
4463 stats
.TimeStampHigh
= read_nic_dword(priv
, TSFR
+4);
4465 UpdateRxPktTimeStamp8190(priv
, &stats
);
4468 // Get Total offset of MPDU Frame Body
4470 if((stats
.RxBufShift
+ stats
.RxDrvInfoSize
) > 0)
4474 TranslateRxSignalStuff819xpci(priv
, skb
, &stats
, pdesc
, pDrvInfo
);
4477 if(pDrvInfo
->FirstAGGR
==1 || pDrvInfo
->PartAggr
== 1)
4478 RT_TRACE(COMP_RXDESC
, "pDrvInfo->FirstAGGR = %d, pDrvInfo->PartAggr = %d\n",
4479 pDrvInfo
->FirstAGGR
, pDrvInfo
->PartAggr
);
4480 skb_trim(skb
, skb
->len
- 4/*sCrcLng*/);
4481 /* rx packets statistics */
4482 ieee80211_hdr
= (struct ieee80211_hdr_1addr
*)skb
->data
;
4483 unicast_packet
= false;
4485 if(is_broadcast_ether_addr(ieee80211_hdr
->addr1
)) {
4487 }else if(is_multicast_ether_addr(ieee80211_hdr
->addr1
)){
4490 /* unicast packet */
4491 unicast_packet
= true;
4494 if(!ieee80211_rtl_rx(priv
->ieee80211
, skb
, &stats
)){
4495 dev_kfree_skb_any(skb
);
4498 if(unicast_packet
) {
4499 priv
->stats
.rxbytesunicast
+= skb
->len
;
4503 pci_unmap_single(priv
->pdev
, *((dma_addr_t
*) skb
->cb
),
4504 priv
->rxbuffersize
, PCI_DMA_FROMDEVICE
);
4507 priv
->rx_buf
[priv
->rx_idx
] = skb
;
4508 *((dma_addr_t
*) skb
->cb
) = pci_map_single(priv
->pdev
, skb_tail_pointer(skb
), priv
->rxbuffersize
, PCI_DMA_FROMDEVICE
);
4511 pdesc
->BufferAddress
= cpu_to_le32(*((dma_addr_t
*)skb
->cb
));
4513 pdesc
->Length
= priv
->rxbuffersize
;
4514 if (priv
->rx_idx
== priv
->rxringcount
-1)
4516 priv
->rx_idx
= (priv
->rx_idx
+ 1) % priv
->rxringcount
;
4521 static void rtl8192_irq_rx_tasklet(unsigned long arg
)
4523 struct r8192_priv
*priv
= (struct r8192_priv
*) arg
;
4526 write_nic_dword(priv
, INTA_MASK
, read_nic_dword(priv
, INTA_MASK
) | IMR_RDU
);
4529 static const struct net_device_ops rtl8192_netdev_ops
= {
4530 .ndo_open
= rtl8192_open
,
4531 .ndo_stop
= rtl8192_close
,
4532 .ndo_tx_timeout
= tx_timeout
,
4533 .ndo_do_ioctl
= rtl8192_ioctl
,
4534 .ndo_set_multicast_list
= r8192_set_multicast
,
4535 .ndo_set_mac_address
= r8192_set_mac_adr
,
4536 .ndo_start_xmit
= ieee80211_rtl_xmit
,
4539 static int __devinit
rtl8192_pci_probe(struct pci_dev
*pdev
,
4540 const struct pci_device_id
*id
)
4542 struct net_device
*dev
= NULL
;
4543 struct r8192_priv
*priv
= NULL
;
4546 unsigned long pmem_start
, pmem_len
, pmem_flags
;
4548 RT_TRACE(COMP_INIT
,"Configuring chip resources\n");
4550 if( pci_enable_device (pdev
) ){
4551 RT_TRACE(COMP_ERR
,"Failed to enable PCI device");
4555 pci_set_master(pdev
);
4556 //pci_set_wmi(pdev);
4557 pci_set_dma_mask(pdev
, 0xffffff00ULL
);
4558 pci_set_consistent_dma_mask(pdev
,0xffffff00ULL
);
4559 dev
= alloc_ieee80211(sizeof(struct r8192_priv
));
4565 pci_set_drvdata(pdev
, dev
);
4566 SET_NETDEV_DEV(dev
, &pdev
->dev
);
4567 priv
= ieee80211_priv(dev
);
4568 priv
->ieee80211
= netdev_priv(dev
);
4570 if((pdev
->subsystem_vendor
== PCI_VENDOR_ID_DLINK
)&&(pdev
->subsystem_device
== 0x3304)){
4571 priv
->ieee80211
->bSupportRemoteWakeUp
= 1;
4574 priv
->ieee80211
->bSupportRemoteWakeUp
= 0;
4577 pmem_start
= pci_resource_start(pdev
, 1);
4578 pmem_len
= pci_resource_len(pdev
, 1);
4579 pmem_flags
= pci_resource_flags (pdev
, 1);
4581 if (!(pmem_flags
& IORESOURCE_MEM
)) {
4582 RT_TRACE(COMP_ERR
, "region #1 not a MMIO resource, aborting\n");
4586 //DMESG("Memory mapped space @ 0x%08lx ", pmem_start);
4587 if( ! request_mem_region(pmem_start
, pmem_len
, RTL819xE_MODULE_NAME
)) {
4588 RT_TRACE(COMP_ERR
,"request_mem_region failed!\n");
4592 priv
->mem_start
= ioremap_nocache(pmem_start
, pmem_len
);
4593 if (!priv
->mem_start
) {
4594 RT_TRACE(COMP_ERR
,"ioremap failed!\n");
4598 dev
->mem_start
= (unsigned long) priv
->mem_start
;
4599 dev
->mem_end
= (unsigned long) (priv
->mem_start
+
4600 pci_resource_len(pdev
, 0));
4602 /* We disable the RETRY_TIMEOUT register (0x41) to keep
4603 * PCI Tx retries from interfering with C3 CPU state */
4604 pci_write_config_byte(pdev
, 0x41, 0x00);
4607 pci_read_config_byte(pdev
, 0x05, &unit
);
4608 pci_write_config_byte(pdev
, 0x05, unit
& (~0x04));
4610 dev
->irq
= pdev
->irq
;
4613 dev
->netdev_ops
= &rtl8192_netdev_ops
;
4615 dev
->wireless_handlers
= &r8192_wx_handlers_def
;
4616 dev
->type
=ARPHRD_ETHER
;
4618 dev
->watchdog_timeo
= HZ
*3;
4620 if (dev_alloc_name(dev
, ifname
) < 0){
4621 RT_TRACE(COMP_INIT
, "Oops: devname already taken! Trying wlan%%d...\n");
4622 strcpy(ifname
, "wlan%d");
4623 dev_alloc_name(dev
, ifname
);
4626 RT_TRACE(COMP_INIT
, "Driver probe completed1\n");
4627 if (rtl8192_init(priv
)!=0) {
4628 RT_TRACE(COMP_ERR
, "Initialization failed\n");
4632 register_netdev(dev
);
4633 RT_TRACE(COMP_INIT
, "dev name=======> %s\n",dev
->name
);
4634 rtl8192_proc_init_one(priv
);
4637 RT_TRACE(COMP_INIT
, "Driver probe completed\n");
4642 if (priv
->mem_start
) {
4643 iounmap(priv
->mem_start
);
4644 release_mem_region( pci_resource_start(pdev
, 1),
4645 pci_resource_len(pdev
, 1) );
4652 free_irq(dev
->irq
, dev
);
4655 free_ieee80211(dev
);
4659 pci_disable_device(pdev
);
4661 DMESG("wlan driver load failed\n");
4662 pci_set_drvdata(pdev
, NULL
);
4667 /* detach all the work and timer structure declared or inititialized
4668 * in r8192_init function.
4670 static void rtl8192_cancel_deferred_work(struct r8192_priv
* priv
)
4672 /* call cancel_work_sync instead of cancel_delayed_work if and only if Linux_version_code
4673 * is or is newer than 2.6.20 and work structure is defined to be struct work_struct.
4674 * Otherwise call cancel_delayed_work is enough.
4675 * FIXME (2.6.20 should 2.6.22, work_struct should not cancel)
4677 cancel_delayed_work(&priv
->watch_dog_wq
);
4678 cancel_delayed_work(&priv
->update_beacon_wq
);
4679 cancel_delayed_work(&priv
->ieee80211
->hw_wakeup_wq
);
4680 cancel_delayed_work(&priv
->gpio_change_rf_wq
);
4681 cancel_work_sync(&priv
->reset_wq
);
4682 cancel_work_sync(&priv
->qos_activate
);
4686 static void __devexit
rtl8192_pci_disconnect(struct pci_dev
*pdev
)
4688 struct net_device
*dev
= pci_get_drvdata(pdev
);
4689 struct r8192_priv
*priv
;
4694 unregister_netdev(dev
);
4696 priv
= ieee80211_priv(dev
);
4698 rtl8192_proc_remove_one(priv
);
4701 if (priv
->pFirmware
)
4703 vfree(priv
->pFirmware
);
4704 priv
->pFirmware
= NULL
;
4706 destroy_workqueue(priv
->priv_wq
);
4708 /* free tx/rx rings */
4709 rtl8192_free_rx_ring(priv
);
4710 for (i
= 0; i
< MAX_TX_QUEUE_COUNT
; i
++)
4711 rtl8192_free_tx_ring(priv
, i
);
4714 printk("Freeing irq %d\n",dev
->irq
);
4715 free_irq(dev
->irq
, dev
);
4719 if (priv
->mem_start
) {
4720 iounmap(priv
->mem_start
);
4721 release_mem_region( pci_resource_start(pdev
, 1),
4722 pci_resource_len(pdev
, 1) );
4725 free_ieee80211(dev
);
4728 pci_disable_device(pdev
);
4729 RT_TRACE(COMP_DOWN
, "wlan driver removed\n");
4732 extern int ieee80211_rtl_init(void);
4733 extern void ieee80211_rtl_exit(void);
4735 static int __init
rtl8192_pci_module_init(void)
4739 retval
= ieee80211_rtl_init();
4743 printk(KERN_INFO
"\nLinux kernel driver for RTL8192 based WLAN cards\n");
4744 printk(KERN_INFO
"Copyright (c) 2007-2008, Realsil Wlan\n");
4745 RT_TRACE(COMP_INIT
, "Initializing module\n");
4746 rtl8192_proc_module_init();
4747 if(0!=pci_register_driver(&rtl8192_pci_driver
))
4749 DMESG("No device found");
4750 /*pci_unregister_driver (&rtl8192_pci_driver);*/
4757 static void __exit
rtl8192_pci_module_exit(void)
4759 pci_unregister_driver(&rtl8192_pci_driver
);
4761 RT_TRACE(COMP_DOWN
, "Exiting\n");
4762 rtl8192_proc_module_remove();
4763 ieee80211_rtl_exit();
4766 static irqreturn_t
rtl8192_interrupt(int irq
, void *netdev
)
4768 struct net_device
*dev
= (struct net_device
*) netdev
;
4769 struct r8192_priv
*priv
= (struct r8192_priv
*)ieee80211_priv(dev
);
4770 unsigned long flags
;
4772 irqreturn_t ret
= IRQ_HANDLED
;
4774 spin_lock_irqsave(&priv
->irq_th_lock
, flags
);
4778 inta
= read_nic_dword(priv
, ISR
); /* & priv->IntrMask; */
4779 write_nic_dword(priv
, ISR
, inta
); /* reset int situation */
4783 * most probably we can safely return IRQ_NONE,
4784 * but for now is better to avoid problems
4789 if (inta
== 0xffff) {
4794 if (!netif_running(dev
))
4797 if (inta
& IMR_TBDOK
) {
4798 RT_TRACE(COMP_INTR
, "beacon ok interrupt!\n");
4799 rtl8192_tx_isr(priv
, BEACON_QUEUE
);
4800 priv
->stats
.txbeaconokint
++;
4803 if (inta
& IMR_TBDER
) {
4804 RT_TRACE(COMP_INTR
, "beacon ok interrupt!\n");
4805 rtl8192_tx_isr(priv
, BEACON_QUEUE
);
4806 priv
->stats
.txbeaconerr
++;
4809 if (inta
& IMR_MGNTDOK
) {
4810 RT_TRACE(COMP_INTR
, "Manage ok interrupt!\n");
4811 priv
->stats
.txmanageokint
++;
4812 rtl8192_tx_isr(priv
, MGNT_QUEUE
);
4815 if (inta
& IMR_COMDOK
)
4817 priv
->stats
.txcmdpktokint
++;
4818 rtl8192_tx_isr(priv
, TXCMD_QUEUE
);
4821 if (inta
& IMR_ROK
) {
4822 priv
->stats
.rxint
++;
4823 tasklet_schedule(&priv
->irq_rx_tasklet
);
4826 if (inta
& IMR_BcnInt
) {
4827 RT_TRACE(COMP_INTR
, "prepare beacon for interrupt!\n");
4828 tasklet_schedule(&priv
->irq_prepare_beacon_tasklet
);
4831 if (inta
& IMR_RDU
) {
4832 RT_TRACE(COMP_INTR
, "rx descriptor unavailable!\n");
4833 priv
->stats
.rxrdu
++;
4834 /* reset int situation */
4835 write_nic_dword(priv
, INTA_MASK
, read_nic_dword(priv
, INTA_MASK
) & ~IMR_RDU
);
4836 tasklet_schedule(&priv
->irq_rx_tasklet
);
4839 if (inta
& IMR_RXFOVW
) {
4840 RT_TRACE(COMP_INTR
, "rx overflow !\n");
4841 priv
->stats
.rxoverflow
++;
4842 tasklet_schedule(&priv
->irq_rx_tasklet
);
4845 if (inta
& IMR_TXFOVW
)
4846 priv
->stats
.txoverflow
++;
4848 if (inta
& IMR_BKDOK
) {
4849 RT_TRACE(COMP_INTR
, "BK Tx OK interrupt!\n");
4850 priv
->stats
.txbkokint
++;
4851 priv
->ieee80211
->LinkDetectInfo
.NumTxOkInPeriod
++;
4852 rtl8192_tx_isr(priv
, BK_QUEUE
);
4855 if (inta
& IMR_BEDOK
) {
4856 RT_TRACE(COMP_INTR
, "BE TX OK interrupt!\n");
4857 priv
->stats
.txbeokint
++;
4858 priv
->ieee80211
->LinkDetectInfo
.NumTxOkInPeriod
++;
4859 rtl8192_tx_isr(priv
, BE_QUEUE
);
4862 if (inta
& IMR_VIDOK
) {
4863 RT_TRACE(COMP_INTR
, "VI TX OK interrupt!\n");
4864 priv
->stats
.txviokint
++;
4865 priv
->ieee80211
->LinkDetectInfo
.NumTxOkInPeriod
++;
4866 rtl8192_tx_isr(priv
, VI_QUEUE
);
4869 if (inta
& IMR_VODOK
) {
4870 priv
->stats
.txvookint
++;
4871 priv
->ieee80211
->LinkDetectInfo
.NumTxOkInPeriod
++;
4872 rtl8192_tx_isr(priv
, VO_QUEUE
);
4876 spin_unlock_irqrestore(&priv
->irq_th_lock
, flags
);
4881 void EnableHWSecurityConfig8192(struct r8192_priv
*priv
)
4883 u8 SECR_value
= 0x0;
4884 struct ieee80211_device
* ieee
= priv
->ieee80211
;
4886 SECR_value
= SCR_TxEncEnable
| SCR_RxDecEnable
;
4888 if (((KEY_TYPE_WEP40
== ieee
->pairwise_key_type
) || (KEY_TYPE_WEP104
== ieee
->pairwise_key_type
)) && (priv
->ieee80211
->auth_mode
!= 2))
4890 SECR_value
|= SCR_RxUseDK
;
4891 SECR_value
|= SCR_TxUseDK
;
4893 else if ((ieee
->iw_mode
== IW_MODE_ADHOC
) && (ieee
->pairwise_key_type
& (KEY_TYPE_CCMP
| KEY_TYPE_TKIP
)))
4895 SECR_value
|= SCR_RxUseDK
;
4896 SECR_value
|= SCR_TxUseDK
;
4899 //add HWSec active enable here.
4900 //default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
4901 ieee
->hwsec_active
= 1;
4903 if ((ieee
->pHTInfo
->IOTAction
&HT_IOT_ACT_PURE_N_MODE
) || !hwwep
)//!ieee->hwsec_support) //add hwsec_support flag to totol control hw_sec on/off
4905 ieee
->hwsec_active
= 0;
4906 SECR_value
&= ~SCR_RxDecEnable
;
4909 RT_TRACE(COMP_SEC
,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__
,
4910 ieee
->hwsec_active
, ieee
->pairwise_key_type
, SECR_value
);
4912 write_nic_byte(priv
, SECR
, SECR_value
);//SECR_value | SCR_UseDK );
4916 #define TOTAL_CAM_ENTRY 32
4917 //#define CAM_CONTENT_COUNT 8
4918 void setKey(struct r8192_priv
*priv
, u8 EntryNo
, u8 KeyIndex
, u16 KeyType
,
4919 const u8
*MacAddr
, u8 DefaultKey
, u32
*KeyContent
)
4921 u32 TargetCommand
= 0;
4922 u32 TargetContent
= 0;
4926 RT_RF_POWER_STATE rtState
;
4928 rtState
= priv
->eRFPowerState
;
4929 if (priv
->PowerSaveControl
.bInactivePs
){
4930 if(rtState
== eRfOff
){
4931 if(priv
->RfOffReason
> RF_CHANGE_BY_IPS
)
4933 RT_TRACE(COMP_ERR
, "%s(): RF is OFF.\n",__FUNCTION__
);
4934 //up(&priv->wx_sem);
4938 down(&priv
->ieee80211
->ips_sem
);
4940 up(&priv
->ieee80211
->ips_sem
);
4944 priv
->ieee80211
->is_set_key
= true;
4946 if (EntryNo
>= TOTAL_CAM_ENTRY
)
4947 RT_TRACE(COMP_ERR
, "cam entry exceeds in setKey()\n");
4949 RT_TRACE(COMP_SEC
, "====>to setKey(), priv:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", priv
, EntryNo
, KeyIndex
, KeyType
, MacAddr
);
4952 usConfig
|= BIT15
| (KeyType
<<2);
4954 usConfig
|= BIT15
| (KeyType
<<2) | KeyIndex
;
4955 // usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
4958 for(i
=0 ; i
<CAM_CONTENT_COUNT
; i
++){
4959 TargetCommand
= i
+CAM_CONTENT_COUNT
*EntryNo
;
4960 TargetCommand
|= BIT31
|BIT16
;
4962 if(i
==0){//MAC|Config
4963 TargetContent
= (u32
)(*(MacAddr
+0)) << 16|
4964 (u32
)(*(MacAddr
+1)) << 24|
4967 write_nic_dword(priv
, WCAMI
, TargetContent
);
4968 write_nic_dword(priv
, RWCAM
, TargetCommand
);
4971 TargetContent
= (u32
)(*(MacAddr
+2)) |
4972 (u32
)(*(MacAddr
+3)) << 8|
4973 (u32
)(*(MacAddr
+4)) << 16|
4974 (u32
)(*(MacAddr
+5)) << 24;
4975 write_nic_dword(priv
, WCAMI
, TargetContent
);
4976 write_nic_dword(priv
, RWCAM
, TargetCommand
);
4978 else { //Key Material
4979 if(KeyContent
!= NULL
)
4981 write_nic_dword(priv
, WCAMI
, (u32
)(*(KeyContent
+i
-2)) );
4982 write_nic_dword(priv
, RWCAM
, TargetCommand
);
4986 RT_TRACE(COMP_SEC
,"=========>after set key, usconfig:%x\n", usConfig
);
4989 bool NicIFEnableNIC(struct r8192_priv
*priv
)
4991 RT_STATUS init_status
= RT_STATUS_SUCCESS
;
4992 PRT_POWER_SAVE_CONTROL pPSC
= &priv
->PowerSaveControl
;
4996 RT_TRACE(COMP_ERR
, "ERR!!! %s(): Driver is already down!\n",__FUNCTION__
);
4997 priv
->bdisable_nic
= false; //YJ,add,091111
5000 // <1> Reset memory: descriptor, buffer,..
5001 //NicIFResetMemory(Adapter);
5003 // <2> Enable Adapter
5004 //priv->bfirst_init = true;
5005 init_status
= rtl8192_adapter_start(priv
);
5006 if (init_status
!= RT_STATUS_SUCCESS
) {
5007 RT_TRACE(COMP_ERR
,"ERR!!! %s(): initialization is failed!\n",__FUNCTION__
);
5008 priv
->bdisable_nic
= false; //YJ,add,091111
5011 RT_CLEAR_PS_LEVEL(pPSC
, RT_RF_OFF_LEVL_HALT_NIC
);
5012 //priv->bfirst_init = false;
5014 // <3> Enable Interrupt
5015 rtl8192_irq_enable(priv
);
5016 priv
->bdisable_nic
= false;
5018 return (init_status
== RT_STATUS_SUCCESS
);
5021 bool NicIFDisableNIC(struct r8192_priv
*priv
)
5025 // <1> Disable Interrupt
5027 priv
->bdisable_nic
= true; //YJ,move,091109
5028 tmp_state
= priv
->ieee80211
->state
;
5030 ieee80211_softmac_stop_protocol(priv
->ieee80211
, false);
5032 priv
->ieee80211
->state
= tmp_state
;
5033 rtl8192_cancel_deferred_work(priv
);
5034 rtl8192_irq_disable(priv
);
5035 // <2> Stop all timer
5037 // <3> Disable Adapter
5038 rtl8192_halt_adapter(priv
, false);
5039 // priv->bdisable_nic = true;
5044 module_init(rtl8192_pci_module_init
);
5045 module_exit(rtl8192_pci_module_exit
);