fuse: add file kernel handle
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / acpi / resources / rscalc.c
blob8eaaecf9200939ea4cb72b9a2f9842e4b80af5a7
1 /*******************************************************************************
3 * Module Name: rscalc - Calculate stream and list lengths
5 ******************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2008, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #include <acpi/acpi.h>
45 #include <acpi/acresrc.h>
46 #include <acpi/acnamesp.h>
48 #define _COMPONENT ACPI_RESOURCES
49 ACPI_MODULE_NAME("rscalc")
51 /* Local prototypes */
52 static u8 acpi_rs_count_set_bits(u16 bit_field);
54 static acpi_rs_length
55 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
57 static u32
58 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
60 /*******************************************************************************
62 * FUNCTION: acpi_rs_count_set_bits
64 * PARAMETERS: bit_field - Field in which to count bits
66 * RETURN: Number of bits set within the field
68 * DESCRIPTION: Count the number of bits set in a resource field. Used for
69 * (Short descriptor) interrupt and DMA lists.
71 ******************************************************************************/
73 static u8 acpi_rs_count_set_bits(u16 bit_field)
75 u8 bits_set;
77 ACPI_FUNCTION_ENTRY();
79 for (bits_set = 0; bit_field; bits_set++) {
81 /* Zero the least significant bit that is set */
83 bit_field &= (u16) (bit_field - 1);
86 return bits_set;
89 /*******************************************************************************
91 * FUNCTION: acpi_rs_struct_option_length
93 * PARAMETERS: resource_source - Pointer to optional descriptor field
95 * RETURN: Status
97 * DESCRIPTION: Common code to handle optional resource_source_index and
98 * resource_source fields in some Large descriptors. Used during
99 * list-to-stream conversion
101 ******************************************************************************/
103 static acpi_rs_length
104 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
106 ACPI_FUNCTION_ENTRY();
109 * If the resource_source string is valid, return the size of the string
110 * (string_length includes the NULL terminator) plus the size of the
111 * resource_source_index (1).
113 if (resource_source->string_ptr) {
114 return ((acpi_rs_length) (resource_source->string_length + 1));
117 return (0);
120 /*******************************************************************************
122 * FUNCTION: acpi_rs_stream_option_length
124 * PARAMETERS: resource_length - Length from the resource header
125 * minimum_total_length - Minimum length of this resource, before
126 * any optional fields. Includes header size
128 * RETURN: Length of optional string (0 if no string present)
130 * DESCRIPTION: Common code to handle optional resource_source_index and
131 * resource_source fields in some Large descriptors. Used during
132 * stream-to-list conversion
134 ******************************************************************************/
136 static u32
137 acpi_rs_stream_option_length(u32 resource_length,
138 u32 minimum_aml_resource_length)
140 u32 string_length = 0;
142 ACPI_FUNCTION_ENTRY();
145 * The resource_source_index and resource_source are optional elements of some
146 * Large-type resource descriptors.
150 * If the length of the actual resource descriptor is greater than the ACPI
151 * spec-defined minimum length, it means that a resource_source_index exists
152 * and is followed by a (required) null terminated string. The string length
153 * (including the null terminator) is the resource length minus the minimum
154 * length, minus one byte for the resource_source_index itself.
156 if (resource_length > minimum_aml_resource_length) {
158 /* Compute the length of the optional string */
160 string_length =
161 resource_length - minimum_aml_resource_length - 1;
165 * Round the length up to a multiple of the native word in order to
166 * guarantee that the entire resource descriptor is native word aligned
168 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
171 /*******************************************************************************
173 * FUNCTION: acpi_rs_get_aml_length
175 * PARAMETERS: Resource - Pointer to the resource linked list
176 * size_needed - Where the required size is returned
178 * RETURN: Status
180 * DESCRIPTION: Takes a linked list of internal resource descriptors and
181 * calculates the size buffer needed to hold the corresponding
182 * external resource byte stream.
184 ******************************************************************************/
186 acpi_status
187 acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
189 acpi_size aml_size_needed = 0;
190 acpi_rs_length total_size;
192 ACPI_FUNCTION_TRACE(rs_get_aml_length);
194 /* Traverse entire list of internal resource descriptors */
196 while (resource) {
198 /* Validate the descriptor type */
200 if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
201 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
204 /* Get the base size of the (external stream) resource descriptor */
206 total_size = acpi_gbl_aml_resource_sizes[resource->type];
209 * Augment the base size for descriptors with optional and/or
210 * variable-length fields
212 switch (resource->type) {
213 case ACPI_RESOURCE_TYPE_IRQ:
215 /* Length can be 3 or 2 */
217 if (resource->data.irq.descriptor_length == 2) {
218 total_size--;
220 break;
222 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
224 /* Length can be 1 or 0 */
226 if (resource->data.irq.descriptor_length == 0) {
227 total_size--;
229 break;
231 case ACPI_RESOURCE_TYPE_VENDOR:
233 * Vendor Defined Resource:
234 * For a Vendor Specific resource, if the Length is between 1 and 7
235 * it will be created as a Small Resource data type, otherwise it
236 * is a Large Resource data type.
238 if (resource->data.vendor.byte_length > 7) {
240 /* Base size of a Large resource descriptor */
242 total_size =
243 sizeof(struct aml_resource_large_header);
246 /* Add the size of the vendor-specific data */
248 total_size = (acpi_rs_length)
249 (total_size + resource->data.vendor.byte_length);
250 break;
252 case ACPI_RESOURCE_TYPE_END_TAG:
254 * End Tag:
255 * We are done -- return the accumulated total size.
257 *size_needed = aml_size_needed + total_size;
259 /* Normal exit */
261 return_ACPI_STATUS(AE_OK);
263 case ACPI_RESOURCE_TYPE_ADDRESS16:
265 * 16-Bit Address Resource:
266 * Add the size of the optional resource_source info
268 total_size = (acpi_rs_length)
269 (total_size +
270 acpi_rs_struct_option_length(&resource->data.
271 address16.
272 resource_source));
273 break;
275 case ACPI_RESOURCE_TYPE_ADDRESS32:
277 * 32-Bit Address Resource:
278 * Add the size of the optional resource_source info
280 total_size = (acpi_rs_length)
281 (total_size +
282 acpi_rs_struct_option_length(&resource->data.
283 address32.
284 resource_source));
285 break;
287 case ACPI_RESOURCE_TYPE_ADDRESS64:
289 * 64-Bit Address Resource:
290 * Add the size of the optional resource_source info
292 total_size = (acpi_rs_length)
293 (total_size +
294 acpi_rs_struct_option_length(&resource->data.
295 address64.
296 resource_source));
297 break;
299 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
301 * Extended IRQ Resource:
302 * Add the size of each additional optional interrupt beyond the
303 * required 1 (4 bytes for each u32 interrupt number)
305 total_size = (acpi_rs_length)
306 (total_size +
307 ((resource->data.extended_irq.interrupt_count -
308 1) * 4) +
309 /* Add the size of the optional resource_source info */
310 acpi_rs_struct_option_length(&resource->data.
311 extended_irq.
312 resource_source));
313 break;
315 default:
316 break;
319 /* Update the total */
321 aml_size_needed += total_size;
323 /* Point to the next object */
325 resource =
326 ACPI_ADD_PTR(struct acpi_resource, resource,
327 resource->length);
330 /* Did not find an end_tag resource descriptor */
332 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
335 /*******************************************************************************
337 * FUNCTION: acpi_rs_get_list_length
339 * PARAMETERS: aml_buffer - Pointer to the resource byte stream
340 * aml_buffer_length - Size of aml_buffer
341 * size_needed - Where the size needed is returned
343 * RETURN: Status
345 * DESCRIPTION: Takes an external resource byte stream and calculates the size
346 * buffer needed to hold the corresponding internal resource
347 * descriptor linked list.
349 ******************************************************************************/
351 acpi_status
352 acpi_rs_get_list_length(u8 * aml_buffer,
353 u32 aml_buffer_length, acpi_size * size_needed)
355 acpi_status status;
356 u8 *end_aml;
357 u8 *buffer;
358 u32 buffer_size;
359 u16 temp16;
360 u16 resource_length;
361 u32 extra_struct_bytes;
362 u8 resource_index;
363 u8 minimum_aml_resource_length;
365 ACPI_FUNCTION_TRACE(rs_get_list_length);
367 *size_needed = 0;
368 end_aml = aml_buffer + aml_buffer_length;
370 /* Walk the list of AML resource descriptors */
372 while (aml_buffer < end_aml) {
374 /* Validate the Resource Type and Resource Length */
376 status = acpi_ut_validate_resource(aml_buffer, &resource_index);
377 if (ACPI_FAILURE(status)) {
378 return_ACPI_STATUS(status);
381 /* Get the resource length and base (minimum) AML size */
383 resource_length = acpi_ut_get_resource_length(aml_buffer);
384 minimum_aml_resource_length =
385 acpi_gbl_resource_aml_sizes[resource_index];
388 * Augment the size for descriptors with optional
389 * and/or variable length fields
391 extra_struct_bytes = 0;
392 buffer =
393 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
395 switch (acpi_ut_get_resource_type(aml_buffer)) {
396 case ACPI_RESOURCE_NAME_IRQ:
398 * IRQ Resource:
399 * Get the number of bits set in the 16-bit IRQ mask
401 ACPI_MOVE_16_TO_16(&temp16, buffer);
402 extra_struct_bytes = acpi_rs_count_set_bits(temp16);
403 break;
405 case ACPI_RESOURCE_NAME_DMA:
407 * DMA Resource:
408 * Get the number of bits set in the 8-bit DMA mask
410 extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
411 break;
413 case ACPI_RESOURCE_NAME_VENDOR_SMALL:
414 case ACPI_RESOURCE_NAME_VENDOR_LARGE:
416 * Vendor Resource:
417 * Get the number of vendor data bytes
419 extra_struct_bytes = resource_length;
420 break;
422 case ACPI_RESOURCE_NAME_END_TAG:
424 * End Tag:
425 * This is the normal exit, add size of end_tag
427 *size_needed += ACPI_RS_SIZE_MIN;
428 return_ACPI_STATUS(AE_OK);
430 case ACPI_RESOURCE_NAME_ADDRESS32:
431 case ACPI_RESOURCE_NAME_ADDRESS16:
432 case ACPI_RESOURCE_NAME_ADDRESS64:
434 * Address Resource:
435 * Add the size of the optional resource_source
437 extra_struct_bytes =
438 acpi_rs_stream_option_length(resource_length,
439 minimum_aml_resource_length);
440 break;
442 case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
444 * Extended IRQ Resource:
445 * Using the interrupt_table_length, add 4 bytes for each additional
446 * interrupt. Note: at least one interrupt is required and is
447 * included in the minimum descriptor size (reason for the -1)
449 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
451 /* Add the size of the optional resource_source */
453 extra_struct_bytes +=
454 acpi_rs_stream_option_length(resource_length -
455 extra_struct_bytes,
456 minimum_aml_resource_length);
457 break;
459 default:
460 break;
464 * Update the required buffer size for the internal descriptor structs
466 * Important: Round the size up for the appropriate alignment. This
467 * is a requirement on IA64.
469 buffer_size = acpi_gbl_resource_struct_sizes[resource_index] +
470 extra_struct_bytes;
471 buffer_size = (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
473 *size_needed += buffer_size;
475 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
476 "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
477 acpi_ut_get_resource_type(aml_buffer),
478 acpi_ut_get_descriptor_length(aml_buffer),
479 buffer_size));
482 * Point to the next resource within the AML stream using the length
483 * contained in the resource descriptor header
485 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
488 /* Did not find an end_tag resource descriptor */
490 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
493 /*******************************************************************************
495 * FUNCTION: acpi_rs_get_pci_routing_table_length
497 * PARAMETERS: package_object - Pointer to the package object
498 * buffer_size_needed - u32 pointer of the size buffer
499 * needed to properly return the
500 * parsed data
502 * RETURN: Status
504 * DESCRIPTION: Given a package representing a PCI routing table, this
505 * calculates the size of the corresponding linked list of
506 * descriptions.
508 ******************************************************************************/
510 acpi_status
511 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
512 acpi_size * buffer_size_needed)
514 u32 number_of_elements;
515 acpi_size temp_size_needed = 0;
516 union acpi_operand_object **top_object_list;
517 u32 index;
518 union acpi_operand_object *package_element;
519 union acpi_operand_object **sub_object_list;
520 u8 name_found;
521 u32 table_index;
523 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
525 number_of_elements = package_object->package.count;
528 * Calculate the size of the return buffer.
529 * The base size is the number of elements * the sizes of the
530 * structures. Additional space for the strings is added below.
531 * The minus one is to subtract the size of the u8 Source[1]
532 * member because it is added below.
534 * But each PRT_ENTRY structure has a pointer to a string and
535 * the size of that string must be found.
537 top_object_list = package_object->package.elements;
539 for (index = 0; index < number_of_elements; index++) {
541 /* Dereference the sub-package */
543 package_element = *top_object_list;
546 * The sub_object_list will now point to an array of the
547 * four IRQ elements: Address, Pin, Source and source_index
549 sub_object_list = package_element->package.elements;
551 /* Scan the irq_table_elements for the Source Name String */
553 name_found = FALSE;
555 for (table_index = 0; table_index < 4 && !name_found;
556 table_index++) {
557 if (*sub_object_list && /* Null object allowed */
558 ((ACPI_TYPE_STRING ==
559 ACPI_GET_OBJECT_TYPE(*sub_object_list)) ||
560 ((ACPI_TYPE_LOCAL_REFERENCE ==
561 ACPI_GET_OBJECT_TYPE(*sub_object_list)) &&
562 ((*sub_object_list)->reference.class ==
563 ACPI_REFCLASS_NAME)))) {
564 name_found = TRUE;
565 } else {
566 /* Look at the next element */
568 sub_object_list++;
572 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
574 /* Was a String type found? */
576 if (name_found) {
577 if (ACPI_GET_OBJECT_TYPE(*sub_object_list) ==
578 ACPI_TYPE_STRING) {
580 * The length String.Length field does not include the
581 * terminating NULL, add 1
583 temp_size_needed += ((acpi_size)
584 (*sub_object_list)->string.
585 length + 1);
586 } else {
587 temp_size_needed +=
588 acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
589 if (!temp_size_needed) {
590 return_ACPI_STATUS(AE_BAD_PARAMETER);
593 } else {
595 * If no name was found, then this is a NULL, which is
596 * translated as a u32 zero.
598 temp_size_needed += sizeof(u32);
601 /* Round up the size since each element must be aligned */
603 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
605 /* Point to the next union acpi_operand_object */
607 top_object_list++;
611 * Add an extra element to the end of the list, essentially a
612 * NULL terminator
614 *buffer_size_needed =
615 temp_size_needed + sizeof(struct acpi_pci_routing_table);
616 return_ACPI_STATUS(AE_OK);