ALSA: hda - Add support of ALC272
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / init / do_mounts_md.c
blob693d24694a6c9f1839a4f7f2f7828f4671d16459
2 #include <linux/raid/md.h>
4 #include "do_mounts.h"
6 /*
7 * When md (and any require personalities) are compiled into the kernel
8 * (not a module), arrays can be assembles are boot time using with AUTODETECT
9 * where specially marked partitions are registered with md_autodetect_dev(),
10 * and with MD_BOOT where devices to be collected are given on the boot line
11 * with md=.....
12 * The code for that is here.
15 static int __initdata raid_noautodetect, raid_autopart;
17 static struct {
18 int minor;
19 int partitioned;
20 int level;
21 int chunk;
22 char *device_names;
23 } md_setup_args[256] __initdata;
25 static int md_setup_ents __initdata;
28 * Parse the command-line parameters given our kernel, but do not
29 * actually try to invoke the MD device now; that is handled by
30 * md_setup_drive after the low-level disk drivers have initialised.
32 * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
33 * assigns the task of parsing integer arguments to the
34 * invoked program now). Added ability to initialise all
35 * the MD devices (by specifying multiple "md=" lines)
36 * instead of just one. -- KTK
37 * 18May2000: Added support for persistent-superblock arrays:
38 * md=n,0,factor,fault,device-list uses RAID0 for device n
39 * md=n,-1,factor,fault,device-list uses LINEAR for device n
40 * md=n,device-list reads a RAID superblock from the devices
41 * elements in device-list are read by name_to_kdev_t so can be
42 * a hex number or something like /dev/hda1 /dev/sdb
43 * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
44 * Shifted name_to_kdev_t() and related operations to md_set_drive()
45 * for later execution. Rewrote section to make devfs compatible.
47 static int __init md_setup(char *str)
49 int minor, level, factor, fault, partitioned = 0;
50 char *pername = "";
51 char *str1;
52 int ent;
54 if (*str == 'd') {
55 partitioned = 1;
56 str++;
58 if (get_option(&str, &minor) != 2) { /* MD Number */
59 printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
60 return 0;
62 str1 = str;
63 for (ent=0 ; ent< md_setup_ents ; ent++)
64 if (md_setup_args[ent].minor == minor &&
65 md_setup_args[ent].partitioned == partitioned) {
66 printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
67 "Replacing previous definition.\n", partitioned?"d":"", minor);
68 break;
70 if (ent >= ARRAY_SIZE(md_setup_args)) {
71 printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
72 return 0;
74 if (ent >= md_setup_ents)
75 md_setup_ents++;
76 switch (get_option(&str, &level)) { /* RAID level */
77 case 2: /* could be 0 or -1.. */
78 if (level == 0 || level == LEVEL_LINEAR) {
79 if (get_option(&str, &factor) != 2 || /* Chunk Size */
80 get_option(&str, &fault) != 2) {
81 printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
82 return 0;
84 md_setup_args[ent].level = level;
85 md_setup_args[ent].chunk = 1 << (factor+12);
86 if (level == LEVEL_LINEAR)
87 pername = "linear";
88 else
89 pername = "raid0";
90 break;
92 /* FALL THROUGH */
93 case 1: /* the first device is numeric */
94 str = str1;
95 /* FALL THROUGH */
96 case 0:
97 md_setup_args[ent].level = LEVEL_NONE;
98 pername="super-block";
101 printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
102 minor, pername, str);
103 md_setup_args[ent].device_names = str;
104 md_setup_args[ent].partitioned = partitioned;
105 md_setup_args[ent].minor = minor;
107 return 1;
110 #define MdpMinorShift 6
112 static void __init md_setup_drive(void)
114 int minor, i, ent, partitioned;
115 dev_t dev;
116 dev_t devices[MD_SB_DISKS+1];
118 for (ent = 0; ent < md_setup_ents ; ent++) {
119 int fd;
120 int err = 0;
121 char *devname;
122 mdu_disk_info_t dinfo;
123 char name[16];
125 minor = md_setup_args[ent].minor;
126 partitioned = md_setup_args[ent].partitioned;
127 devname = md_setup_args[ent].device_names;
129 sprintf(name, "/dev/md%s%d", partitioned?"_d":"", minor);
130 if (partitioned)
131 dev = MKDEV(mdp_major, minor << MdpMinorShift);
132 else
133 dev = MKDEV(MD_MAJOR, minor);
134 create_dev(name, dev);
135 for (i = 0; i < MD_SB_DISKS && devname != NULL; i++) {
136 char *p;
137 char comp_name[64];
138 u32 rdev;
140 p = strchr(devname, ',');
141 if (p)
142 *p++ = 0;
144 dev = name_to_dev_t(devname);
145 if (strncmp(devname, "/dev/", 5) == 0)
146 devname += 5;
147 snprintf(comp_name, 63, "/dev/%s", devname);
148 rdev = bstat(comp_name);
149 if (rdev)
150 dev = new_decode_dev(rdev);
151 if (!dev) {
152 printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
153 break;
156 devices[i] = dev;
158 devname = p;
160 devices[i] = 0;
162 if (!i)
163 continue;
165 printk(KERN_INFO "md: Loading md%s%d: %s\n",
166 partitioned ? "_d" : "", minor,
167 md_setup_args[ent].device_names);
169 fd = sys_open(name, 0, 0);
170 if (fd < 0) {
171 printk(KERN_ERR "md: open failed - cannot start "
172 "array %s\n", name);
173 continue;
175 if (sys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
176 printk(KERN_WARNING
177 "md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
178 minor);
179 sys_close(fd);
180 continue;
183 if (md_setup_args[ent].level != LEVEL_NONE) {
184 /* non-persistent */
185 mdu_array_info_t ainfo;
186 ainfo.level = md_setup_args[ent].level;
187 ainfo.size = 0;
188 ainfo.nr_disks =0;
189 ainfo.raid_disks =0;
190 while (devices[ainfo.raid_disks])
191 ainfo.raid_disks++;
192 ainfo.md_minor =minor;
193 ainfo.not_persistent = 1;
195 ainfo.state = (1 << MD_SB_CLEAN);
196 ainfo.layout = 0;
197 ainfo.chunk_size = md_setup_args[ent].chunk;
198 err = sys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
199 for (i = 0; !err && i <= MD_SB_DISKS; i++) {
200 dev = devices[i];
201 if (!dev)
202 break;
203 dinfo.number = i;
204 dinfo.raid_disk = i;
205 dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
206 dinfo.major = MAJOR(dev);
207 dinfo.minor = MINOR(dev);
208 err = sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
210 } else {
211 /* persistent */
212 for (i = 0; i <= MD_SB_DISKS; i++) {
213 dev = devices[i];
214 if (!dev)
215 break;
216 dinfo.major = MAJOR(dev);
217 dinfo.minor = MINOR(dev);
218 sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
221 if (!err)
222 err = sys_ioctl(fd, RUN_ARRAY, 0);
223 if (err)
224 printk(KERN_WARNING "md: starting md%d failed\n", minor);
225 else {
226 /* reread the partition table.
227 * I (neilb) and not sure why this is needed, but I cannot
228 * boot a kernel with devfs compiled in from partitioned md
229 * array without it
231 sys_close(fd);
232 fd = sys_open(name, 0, 0);
233 sys_ioctl(fd, BLKRRPART, 0);
235 sys_close(fd);
239 static int __init raid_setup(char *str)
241 int len, pos;
243 len = strlen(str) + 1;
244 pos = 0;
246 while (pos < len) {
247 char *comma = strchr(str+pos, ',');
248 int wlen;
249 if (comma)
250 wlen = (comma-str)-pos;
251 else wlen = (len-1)-pos;
253 if (!strncmp(str, "noautodetect", wlen))
254 raid_noautodetect = 1;
255 if (strncmp(str, "partitionable", wlen)==0)
256 raid_autopart = 1;
257 if (strncmp(str, "part", wlen)==0)
258 raid_autopart = 1;
259 pos += wlen+1;
261 return 1;
264 __setup("raid=", raid_setup);
265 __setup("md=", md_setup);
267 void __init md_run_setup(void)
269 create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
270 if (raid_noautodetect)
271 printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
272 else {
273 int fd = sys_open("/dev/md0", 0, 0);
274 if (fd >= 0) {
275 sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
276 sys_close(fd);
279 md_setup_drive();