[CELL] cell: add per BE structure with info about its SPUs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / sound / oss / dmasound / dmasound.h
blob25dd5a318eb452d53ac68d3d4a0ecf82aeadaf1a
1 #ifndef _dmasound_h_
2 /*
3 * linux/sound/oss/dmasound/dmasound.h
6 * Minor numbers for the sound driver.
8 * Unfortunately Creative called the codec chip of SB as a DSP. For this
9 * reason the /dev/dsp is reserved for digitized audio use. There is a
10 * device for true DSP processors but it will be called something else.
11 * In v3.0 it's /dev/sndproc but this could be a temporary solution.
13 #define _dmasound_h_
15 #include <linux/types.h>
17 #define SND_NDEVS 256 /* Number of supported devices */
18 #define SND_DEV_CTL 0 /* Control port /dev/mixer */
19 #define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
20 synthesizer and MIDI output) */
21 #define SND_DEV_MIDIN 2 /* Raw midi access */
22 #define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
23 #define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
24 #define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
25 #define SND_DEV_STATUS 6 /* /dev/sndstat */
26 /* #7 not in use now. Was in 2.4. Free for use after v3.0. */
27 #define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
28 #define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
29 #define SND_DEV_PSS SND_DEV_SNDPROC
31 /* switch on various prinks */
32 #define DEBUG_DMASOUND 1
34 #define MAX_AUDIO_DEV 5
35 #define MAX_MIXER_DEV 4
36 #define MAX_SYNTH_DEV 3
37 #define MAX_MIDI_DEV 6
38 #define MAX_TIMER_DEV 3
40 #define MAX_CATCH_RADIUS 10
42 #define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
43 #define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
45 #define IOCTL_IN(arg, ret) \
46 do { int error = get_user(ret, (int __user *)(arg)); \
47 if (error) return error; \
48 } while (0)
49 #define IOCTL_OUT(arg, ret) ioctl_return((int __user *)(arg), ret)
51 static inline int ioctl_return(int __user *addr, int value)
53 return value < 0 ? value : put_user(value, addr);
58 * Configuration
61 #undef HAS_8BIT_TABLES
62 #undef HAS_RECORD
64 #if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\
65 defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\
66 defined(CONFIG_DMASOUND_Q40) || defined(CONFIG_DMASOUND_Q40_MODULE)
67 #define HAS_8BIT_TABLES
68 #define MIN_BUFFERS 4
69 #define MIN_BUFSIZE (1<<12) /* in bytes (- where does this come from ?) */
70 #define MIN_FRAG_SIZE 8 /* not 100% sure about this */
71 #define MAX_BUFSIZE (1<<17) /* Limit for Amiga is 128 kb */
72 #define MAX_FRAG_SIZE 15 /* allow *4 for mono-8 => stereo-16 (for multi) */
74 #else /* is pmac and multi is off */
76 #define MIN_BUFFERS 2
77 #define MIN_BUFSIZE (1<<8) /* in bytes */
78 #define MIN_FRAG_SIZE 8
79 #define MAX_BUFSIZE (1<<18) /* this is somewhat arbitrary for pmac */
80 #define MAX_FRAG_SIZE 16 /* need to allow *4 for mono-8 => stereo-16 */
81 #endif
83 #define DEFAULT_N_BUFFERS 4
84 #define DEFAULT_BUFF_SIZE (1<<15)
86 #if defined(CONFIG_DMASOUND_PMAC) || defined(CONFIG_DMASOUND_PMAC_MODULE)
87 #define HAS_RECORD
88 #endif
91 * Initialization
94 extern int dmasound_init(void);
95 #ifdef MODULE
96 extern void dmasound_deinit(void);
97 #else
98 #define dmasound_deinit() do { } while (0)
99 #endif
101 /* description of the set-up applies to either hard or soft settings */
103 typedef struct {
104 int format; /* AFMT_* */
105 int stereo; /* 0 = mono, 1 = stereo */
106 int size; /* 8/16 bit*/
107 int speed; /* speed */
108 } SETTINGS;
111 * Machine definitions
114 typedef struct {
115 const char *name;
116 const char *name2;
117 struct module *owner;
118 void *(*dma_alloc)(unsigned int, gfp_t);
119 void (*dma_free)(void *, unsigned int);
120 int (*irqinit)(void);
121 #ifdef MODULE
122 void (*irqcleanup)(void);
123 #endif
124 void (*init)(void);
125 void (*silence)(void);
126 int (*setFormat)(int);
127 int (*setVolume)(int);
128 int (*setBass)(int);
129 int (*setTreble)(int);
130 int (*setGain)(int);
131 void (*play)(void);
132 void (*record)(void); /* optional */
133 void (*mixer_init)(void); /* optional */
134 int (*mixer_ioctl)(u_int, u_long); /* optional */
135 int (*write_sq_setup)(void); /* optional */
136 int (*read_sq_setup)(void); /* optional */
137 int (*sq_open)(mode_t); /* optional */
138 int (*state_info)(char *, size_t); /* optional */
139 void (*abort_read)(void); /* optional */
140 int min_dsp_speed;
141 int max_dsp_speed;
142 int version ;
143 int hardware_afmts ; /* OSS says we only return h'ware info */
144 /* when queried via SNDCTL_DSP_GETFMTS */
145 int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */
146 SETTINGS default_hard ; /* open() or init() should set something valid */
147 SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */
148 } MACHINE;
151 * Low level stuff
154 typedef struct {
155 ssize_t (*ct_ulaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
156 ssize_t (*ct_alaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
157 ssize_t (*ct_s8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
158 ssize_t (*ct_u8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
159 ssize_t (*ct_s16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
160 ssize_t (*ct_u16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
161 ssize_t (*ct_s16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
162 ssize_t (*ct_u16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
163 } TRANS;
165 struct sound_settings {
166 MACHINE mach; /* machine dependent things */
167 SETTINGS hard; /* hardware settings */
168 SETTINGS soft; /* software settings */
169 SETTINGS dsp; /* /dev/dsp default settings */
170 TRANS *trans_write; /* supported translations */
171 #ifdef HAS_RECORD
172 TRANS *trans_read; /* supported translations */
173 #endif
174 int volume_left; /* volume (range is machine dependent) */
175 int volume_right;
176 int bass; /* tone (range is machine dependent) */
177 int treble;
178 int gain;
179 int minDev; /* minor device number currently open */
180 spinlock_t lock;
183 extern struct sound_settings dmasound;
185 #ifdef HAS_8BIT_TABLES
186 extern char dmasound_ulaw2dma8[];
187 extern char dmasound_alaw2dma8[];
188 #endif
191 * Mid level stuff
194 static inline int dmasound_set_volume(int volume)
196 return dmasound.mach.setVolume(volume);
199 static inline int dmasound_set_bass(int bass)
201 return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50;
204 static inline int dmasound_set_treble(int treble)
206 return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50;
209 static inline int dmasound_set_gain(int gain)
211 return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100;
216 * Sound queue stuff, the heart of the driver
219 struct sound_queue {
220 /* buffers allocated for this queue */
221 int numBufs; /* real limits on what the user can have */
222 int bufSize; /* in bytes */
223 char **buffers;
225 /* current parameters */
226 int locked ; /* params cannot be modified when != 0 */
227 int user_frags ; /* user requests this many */
228 int user_frag_size ; /* of this size */
229 int max_count; /* actual # fragments <= numBufs */
230 int block_size; /* internal block size in bytes */
231 int max_active; /* in-use fragments <= max_count */
233 /* it shouldn't be necessary to declare any of these volatile */
234 int front, rear, count;
235 int rear_size;
237 * The use of the playing field depends on the hardware
239 * Atari, PMac: The number of frames that are loaded/playing
241 * Amiga: Bit 0 is set: a frame is loaded
242 * Bit 1 is set: a frame is playing
244 int active;
245 wait_queue_head_t action_queue, open_queue, sync_queue;
246 int open_mode;
247 int busy, syncing, xruns, died;
250 #define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ)
251 #define WAKE_UP(queue) (wake_up_interruptible(&queue))
253 extern struct sound_queue dmasound_write_sq;
254 #define write_sq dmasound_write_sq
256 #ifdef HAS_RECORD
257 extern struct sound_queue dmasound_read_sq;
258 #define read_sq dmasound_read_sq
259 #endif
261 extern int dmasound_catchRadius;
262 #define catchRadius dmasound_catchRadius
264 /* define the value to be put in the byte-swap reg in mac-io
265 when we want it to swap for us.
267 #define BS_VAL 1
269 #define SW_INPUT_VOLUME_SCALE 4
270 #define SW_INPUT_VOLUME_DEFAULT (128 / SW_INPUT_VOLUME_SCALE)
272 extern int expand_read_bal; /* Balance factor for reading */
273 extern uint software_input_volume; /* software implemented recording volume! */
275 #endif /* _dmasound_h_ */