drivers/parport/parport_serial.c

   1 /*
   2  * Support for common PCI multi-I/O cards (which is most of them)
   3  *
   4  * Copyright (C) 2001  Tim Waugh <twaugh@redhat.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  *
  11  *
  12  * Multi-function PCI cards are supposed to present separate logical
  13  * devices on the bus.  A common thing to do seems to be to just use
  14  * one logical device with lots of base address registers for both
  15  * parallel ports and serial ports.  This driver is for dealing with
  16  * that.
  17  *
  18  */
  19
  20 #include <linux/types.h>
  21 #include <linux/module.h>
  22 #include <linux/init.h>
  23 #include <linux/slab.h>
  24 #include <linux/pci.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/parport.h>
  27 #include <linux/parport_pc.h>
  28 #include <linux/8250_pci.h>
  29
  30 enum parport_pc_pci_cards {
  31         titan_110l = 0,
  32         titan_210l,
  33         netmos_9xx5_combo,
  34         netmos_9855,
  35         netmos_9855_2p,
  36         avlab_1s1p,
  37         avlab_1s2p,
  38         avlab_2s1p,
  39         siig_1s1p_10x,
  40         siig_2s1p_10x,
  41         siig_2p1s_20x,
  42         siig_1s1p_20x,
  43         siig_2s1p_20x,
  44 };
  45
  46 /* each element directly indexed from enum list, above */
  47 struct parport_pc_pci {
  48         int numports;
  49         struct { /* BAR (base address registers) numbers in the config
  50                     space header */
  51                 int lo;
  52                 int hi; /* -1 if not there, >6 for offset-method (max
  53                            BAR is 6) */
  54         } addr[4];
  55
  56         /* If set, this is called immediately after pci_enable_device.
  57          * If it returns non-zero, no probing will take place and the
  58          * ports will not be used. */
  59         int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
  60                                 int autoirq, int autodma);
  61
  62         /* If set, this is called after probing for ports.  If 'failed'
  63          * is non-zero we couldn't use any of the ports. */
  64         void (*postinit_hook) (struct pci_dev *pdev,
  65                                 struct parport_pc_pci *card, int failed);
  66 };
  67
  68 static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
  69 {
  70         /* the rule described below doesn't hold for this device */
  71         if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
  72                         dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
  73                         dev->subsystem_device == 0x0299)
  74                 return -ENODEV;
  75         /*
  76          * Netmos uses the subdevice ID to indicate the number of parallel
  77          * and serial ports.  The form is 0x00PS, where <P> is the number of
  78          * parallel ports and <S> is the number of serial ports.
  79          */
  80         par->numports = (dev->subsystem_device & 0xf0) >> 4;
  81         if (par->numports > ARRAY_SIZE(par->addr))
  82                 par->numports = ARRAY_SIZE(par->addr);
  83         /*
  84          * This function is currently only called for cards with up to
  85          * one parallel port.
  86          * Parallel port BAR is either before or after serial ports BARS;
  87          * hence, lo should be either 0 or equal to the number of serial ports.
  88          */
  89         if (par->addr[0].lo != 0)
  90                 par->addr[0].lo = dev->subsystem_device & 0xf;
  91         return 0;
  92 }
  93
  94 static struct parport_pc_pci cards[] __devinitdata = {
  95         /* titan_110l */                { 1, { { 3, -1 }, } },
  96         /* titan_210l */                { 1, { { 3, -1 }, } },
  97         /* netmos_9xx5_combo */         { 1, { { 2, -1 }, }, netmos_parallel_init },
  98         /* netmos_9855 */               { 1, { { 0, -1 }, }, netmos_parallel_init },
  99         /* netmos_9855_2p */            { 2, { { 0, -1 }, { 2, -1 }, } },
 100         /* avlab_1s1p     */            { 1, { { 1, 2}, } },
 101         /* avlab_1s2p     */            { 2, { { 1, 2}, { 3, 4 },} },
 102         /* avlab_2s1p     */            { 1, { { 2, 3}, } },
 103         /* siig_1s1p_10x */             { 1, { { 3, 4 }, } },
 104         /* siig_2s1p_10x */             { 1, { { 4, 5 }, } },
 105         /* siig_2p1s_20x */             { 2, { { 1, 2 }, { 3, 4 }, } },
 106         /* siig_1s1p_20x */             { 1, { { 1, 2 }, } },
 107         /* siig_2s1p_20x */             { 1, { { 2, 3 }, } },
 108 };
 109
 110 static struct pci_device_id parport_serial_pci_tbl[] = {
 111         /* PCI cards */
 112         { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
 113           PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
 114         { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
 115           PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
 116         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
 117           PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
 118         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
 119           PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
 120         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
 121           PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
 122         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
 123           PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
 124         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
 125           0x1000, 0x0020, 0, 0, netmos_9855_2p },
 126         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
 127           0x1000, 0x0022, 0, 0, netmos_9855_2p },
 128         { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
 129           PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
 130         /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
 131         { PCI_VENDOR_ID_AFAVLAB, 0x2110,
 132           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
 133         { PCI_VENDOR_ID_AFAVLAB, 0x2111,
 134           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
 135         { PCI_VENDOR_ID_AFAVLAB, 0x2112,
 136           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
 137         { PCI_VENDOR_ID_AFAVLAB, 0x2140,
 138           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
 139         { PCI_VENDOR_ID_AFAVLAB, 0x2141,
 140           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
 141         { PCI_VENDOR_ID_AFAVLAB, 0x2142,
 142           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
 143         { PCI_VENDOR_ID_AFAVLAB, 0x2160,
 144           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
 145         { PCI_VENDOR_ID_AFAVLAB, 0x2161,
 146           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
 147         { PCI_VENDOR_ID_AFAVLAB, 0x2162,
 148           PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
 149         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
 150           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
 151         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
 152           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
 153         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
 154           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
 155         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
 156           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
 157         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
 158           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
 159         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
 160           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
 161         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
 162           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
 163         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
 164           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
 165         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
 166           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
 167         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
 168           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
 169         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
 170           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
 171         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
 172           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
 173         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
 174           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
 175         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
 176           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
 177         { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
 178           PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
 179
 180         { 0, } /* terminate list */
 181 };
 182 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
 183
 184 /*
 185  * This table describes the serial "geometry" of these boards.  Any
 186  * quirks for these can be found in drivers/serial/8250_pci.c
 187  *
 188  * Cards not tested are marked n/t
 189  * If you have one of these cards and it works for you, please tell me..
 190  */
 191 static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
 192         [titan_110l] = {
 193                 .flags          = FL_BASE1 | FL_BASE_BARS,
 194                 .num_ports      = 1,
 195                 .base_baud      = 921600,
 196                 .uart_offset    = 8,
 197         },
 198         [titan_210l] = {
 199                 .flags          = FL_BASE1 | FL_BASE_BARS,
 200                 .num_ports      = 2,
 201                 .base_baud      = 921600,
 202                 .uart_offset    = 8,
 203         },
 204         [netmos_9xx5_combo] = {
 205                 .flags          = FL_BASE0 | FL_BASE_BARS,
 206                 .num_ports      = 1,
 207                 .base_baud      = 115200,
 208                 .uart_offset    = 8,
 209         },
 210         [netmos_9855] = {
 211                 .flags          = FL_BASE2 | FL_BASE_BARS,
 212                 .num_ports      = 1,
 213                 .base_baud      = 115200,
 214                 .uart_offset    = 8,
 215         },
 216         [netmos_9855_2p] = {
 217                 .flags          = FL_BASE4 | FL_BASE_BARS,
 218                 .num_ports      = 1,
 219                 .base_baud      = 115200,
 220                 .uart_offset    = 8,
 221         },
 222         [avlab_1s1p] = { /* n/t */
 223                 .flags          = FL_BASE0 | FL_BASE_BARS,
 224                 .num_ports      = 1,
 225                 .base_baud      = 115200,
 226                 .uart_offset    = 8,
 227         },
 228         [avlab_1s2p] = { /* n/t */
 229                 .flags          = FL_BASE0 | FL_BASE_BARS,
 230                 .num_ports      = 1,
 231                 .base_baud      = 115200,
 232                 .uart_offset    = 8,
 233         },
 234         [avlab_2s1p] = { /* n/t */
 235                 .flags          = FL_BASE0 | FL_BASE_BARS,
 236                 .num_ports      = 2,
 237                 .base_baud      = 115200,
 238                 .uart_offset    = 8,
 239         },
 240         [siig_1s1p_10x] = {
 241                 .flags          = FL_BASE2,
 242                 .num_ports      = 1,
 243                 .base_baud      = 460800,
 244                 .uart_offset    = 8,
 245         },
 246         [siig_2s1p_10x] = {
 247                 .flags          = FL_BASE2,
 248                 .num_ports      = 1,
 249                 .base_baud      = 921600,
 250                 .uart_offset    = 8,
 251         },
 252         [siig_2p1s_20x] = {
 253                 .flags          = FL_BASE0,
 254                 .num_ports      = 1,
 255                 .base_baud      = 921600,
 256                 .uart_offset    = 8,
 257         },
 258         [siig_1s1p_20x] = {
 259                 .flags          = FL_BASE0,
 260                 .num_ports      = 1,
 261                 .base_baud      = 921600,
 262                 .uart_offset    = 8,
 263         },
 264         [siig_2s1p_20x] = {
 265                 .flags          = FL_BASE0,
 266                 .num_ports      = 1,
 267                 .base_baud      = 921600,
 268                 .uart_offset    = 8,
 269         },
 270 };
 271
 272 struct parport_serial_private {
 273         struct serial_private   *serial;
 274         int num_par;
 275         struct parport *port[PARPORT_MAX];
 276         struct parport_pc_pci par;
 277 };
 278
 279 /* Register the serial port(s) of a PCI card. */
 280 static int __devinit serial_register (struct pci_dev *dev,
 281                                       const struct pci_device_id *id)
 282 {
 283         struct parport_serial_private *priv = pci_get_drvdata (dev);
 284         struct pciserial_board *board;
 285         struct serial_private *serial;
 286
 287         board = &pci_parport_serial_boards[id->driver_data];
 288         serial = pciserial_init_ports(dev, board);
 289
 290         if (IS_ERR(serial))
 291                 return PTR_ERR(serial);
 292
 293         priv->serial = serial;
 294         return 0;
 295 }
 296
 297 /* Register the parallel port(s) of a PCI card. */
 298 static int __devinit parport_register (struct pci_dev *dev,
 299                                        const struct pci_device_id *id)
 300 {
 301         struct parport_pc_pci *card;
 302         struct parport_serial_private *priv = pci_get_drvdata (dev);
 303         int n, success = 0;
 304
 305         priv->par = cards[id->driver_data];
 306         card = &priv->par;
 307         if (card->preinit_hook &&
 308             card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
 309                 return -ENODEV;
 310
 311         for (n = 0; n < card->numports; n++) {
 312                 struct parport *port;
 313                 int lo = card->addr[n].lo;
 314                 int hi = card->addr[n].hi;
 315                 unsigned long io_lo, io_hi;
 316                 int irq;
 317
 318                 if (priv->num_par == ARRAY_SIZE (priv->port)) {
 319                         printk (KERN_WARNING
 320                                 "parport_serial: %s: only %zu parallel ports "
 321                                 "supported (%d reported)\n", pci_name (dev),
 322                                 ARRAY_SIZE(priv->port), card->numports);
 323                         break;
 324                 }
 325
 326                 io_lo = pci_resource_start (dev, lo);
 327                 io_hi = 0;
 328                 if ((hi >= 0) && (hi <= 6))
 329                         io_hi = pci_resource_start (dev, hi);
 330                 else if (hi > 6)
 331                         io_lo += hi; /* Reinterpret the meaning of
 332                                         "hi" as an offset (see SYBA
 333                                         def.) */
 334                 /* TODO: test if sharing interrupts works */
 335                 irq = dev->irq;
 336                 if (irq == IRQ_NONE) {
 337                         dev_dbg(&dev->dev,
 338                         "PCI parallel port detected: I/O at %#lx(%#lx)\n",
 339                                 io_lo, io_hi);
 340                         irq = PARPORT_IRQ_NONE;
 341                 } else {
 342                         dev_dbg(&dev->dev,
 343                 "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
 344                                 io_lo, io_hi, irq);
 345                 }
 346                 port = parport_pc_probe_port (io_lo, io_hi, irq,
 347                               PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
 348                 if (port) {
 349                         priv->port[priv->num_par++] = port;
 350                         success = 1;
 351                 }
 352         }
 353
 354         if (card->postinit_hook)
 355                 card->postinit_hook (dev, card, !success);
 356
 357         return 0;
 358 }
 359
 360 static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
 361                                                const struct pci_device_id *id)
 362 {
 363         struct parport_serial_private *priv;
 364         int err;
 365
 366         priv = kzalloc (sizeof *priv, GFP_KERNEL);
 367         if (!priv)
 368                 return -ENOMEM;
 369         pci_set_drvdata (dev, priv);
 370
 371         err = pci_enable_device (dev);
 372         if (err) {
 373                 pci_set_drvdata (dev, NULL);
 374                 kfree (priv);
 375                 return err;
 376         }
 377
 378         if (parport_register (dev, id)) {
 379                 pci_set_drvdata (dev, NULL);
 380                 kfree (priv);
 381                 return -ENODEV;
 382         }
 383
 384         if (serial_register (dev, id)) {
 385                 int i;
 386                 for (i = 0; i < priv->num_par; i++)
 387                         parport_pc_unregister_port (priv->port[i]);
 388                 pci_set_drvdata (dev, NULL);
 389                 kfree (priv);
 390                 return -ENODEV;
 391         }
 392
 393         return 0;
 394 }
 395
 396 static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
 397 {
 398         struct parport_serial_private *priv = pci_get_drvdata (dev);
 399         int i;
 400
 401         pci_set_drvdata(dev, NULL);
 402
 403         // Serial ports
 404         if (priv->serial)
 405                 pciserial_remove_ports(priv->serial);
 406
 407         // Parallel ports
 408         for (i = 0; i < priv->num_par; i++)
 409                 parport_pc_unregister_port (priv->port[i]);
 410
 411         kfree (priv);
 412         return;
 413 }
 414
 415 #ifdef CONFIG_PM
 416 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
 417 {
 418         struct parport_serial_private *priv = pci_get_drvdata(dev);
 419
 420         if (priv->serial)
 421                 pciserial_suspend_ports(priv->serial);
 422
 423         /* FIXME: What about parport? */
 424
 425         pci_save_state(dev);
 426         pci_set_power_state(dev, pci_choose_state(dev, state));
 427         return 0;
 428 }
 429
 430 static int parport_serial_pci_resume(struct pci_dev *dev)
 431 {
 432         struct parport_serial_private *priv = pci_get_drvdata(dev);
 433         int err;
 434
 435         pci_set_power_state(dev, PCI_D0);
 436         pci_restore_state(dev);
 437
 438         /*
 439          * The device may have been disabled.  Re-enable it.
 440          */
 441         err = pci_enable_device(dev);
 442         if (err) {
 443                 printk(KERN_ERR "parport_serial: %s: error enabling "
 444                         "device for resume (%d)\n", pci_name(dev), err);
 445                 return err;
 446         }
 447
 448         if (priv->serial)
 449                 pciserial_resume_ports(priv->serial);
 450
 451         /* FIXME: What about parport? */
 452
 453         return 0;
 454 }
 455 #endif
 456
 457 static struct pci_driver parport_serial_pci_driver = {
 458         .name           = "parport_serial",
 459         .id_table       = parport_serial_pci_tbl,
 460         .probe          = parport_serial_pci_probe,
 461         .remove         = __devexit_p(parport_serial_pci_remove),
 462 #ifdef CONFIG_PM
 463         .suspend        = parport_serial_pci_suspend,
 464         .resume         = parport_serial_pci_resume,
 465 #endif
 466 };
 467
 468
 469 static int __init parport_serial_init (void)
 470 {
 471         return pci_register_driver (&parport_serial_pci_driver);
 472 }
 473
 474 static void __exit parport_serial_exit (void)
 475 {
 476         pci_unregister_driver (&parport_serial_pci_driver);
 477         return;
 478 }
 479
 480 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
 481 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
 482 MODULE_LICENSE("GPL");
 483
 484 module_init(parport_serial_init);
 485 module_exit(parport_serial_exit);