2 * arch/ppc/syslib/m8260_setup.c
4 * Copyright (C) 1995 Linus Torvalds
5 * Adapted from 'alpha' version by Gary Thomas
6 * Modified by Cort Dougan (cort@cs.nmt.edu)
7 * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
8 * Further modified for generic 8xx and 8260 by Dan.
11 #include <linux/config.h>
12 #include <linux/sched.h>
13 #include <linux/kernel.h>
15 #include <linux/stddef.h>
16 #include <linux/slab.h>
17 #include <linux/init.h>
18 #include <linux/initrd.h>
19 #include <linux/root_dev.h>
20 #include <linux/seq_file.h>
21 #include <linux/irq.h>
25 #include <asm/pgtable.h>
26 #include <asm/mpc8260.h>
28 #include <asm/machdep.h>
29 #include <asm/bootinfo.h>
34 unsigned char __res
[sizeof(bd_t
)];
36 extern void pq2_find_bridges(void);
37 extern void pq2pci_init_irq(void);
38 extern void idma_pci9_init(void);
40 /* Place-holder for board-specific init */
41 void __attribute__ ((weak
)) __init
42 m82xx_board_setup(void)
47 m8260_setup_arch(void)
49 /* Print out Vendor and Machine info. */
50 printk(KERN_INFO
"%s %s port\n", CPUINFO_VENDOR
, CPUINFO_MACHINE
);
52 /* Reset the Communication Processor Module. */
54 #ifdef CONFIG_8260_PCI9
55 /* Initialise IDMA for PCI erratum workaround */
58 #ifdef CONFIG_PCI_8260
61 #ifdef CONFIG_BLK_DEV_INITRD
66 identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME
,
67 in_be32(CPM_MAP_ADDR
+ CPM_IMMR_OFFSET
));
72 /* The decrementer counts at the system (internal) clock frequency
76 m8260_calibrate_decr(void)
78 bd_t
*binfo
= (bd_t
*)__res
;
81 freq
= binfo
->bi_busfreq
;
83 tb_ticks_per_jiffy
= freq
/ HZ
/ divisor
;
84 tb_to_us
= mulhwu_scale_factor(freq
/ divisor
, 1000000);
87 /* The 8260 has an internal 1-second timer update register that
88 * we should use for this purpose.
93 m8260_set_rtc_time(unsigned long time
)
101 m8260_get_rtc_time(void)
103 /* Get time from the RTC.
105 return((unsigned long)rtc_time
);
108 #ifndef BOOTROM_RESTART_ADDR
109 #warning "Using default BOOTROM_RESTART_ADDR!"
110 #define BOOTROM_RESTART_ADDR 0xff000104
114 m8260_restart(char *cmd
)
116 extern void m8260_gorom(bd_t
*bi
, uint addr
);
119 /* Most boot roms have a warmstart as the second instruction
120 * of the reset vector. If that doesn't work for you, change this
121 * or the reboot program to send a proper address.
123 startaddr
= BOOTROM_RESTART_ADDR
;
125 if (!strncmp(cmd
, "startaddr=", 10))
126 startaddr
= simple_strtoul(&cmd
[10], NULL
, 0);
129 m8260_gorom((void*)__pa(__res
), startaddr
);
140 m8260_power_off(void)
146 m8260_show_cpuinfo(struct seq_file
*m
)
148 bd_t
*bp
= (bd_t
*)__res
;
150 seq_printf(m
, "vendor\t\t: %s\n"
153 "mem size\t\t: 0x%08x\n"
154 "console baud\t\t: %d\n"
156 "core clock\t: %u MHz\n"
157 "CPM clock\t: %u MHz\n"
158 "bus clock\t: %u MHz\n",
159 CPUINFO_VENDOR
, CPUINFO_MACHINE
, bp
->bi_memsize
,
160 bp
->bi_baudrate
, bp
->bi_intfreq
/ 1000000,
161 bp
->bi_cpmfreq
/ 1000000, bp
->bi_busfreq
/ 1000000);
165 /* Initialize the internal interrupt controller. The number of
166 * interrupts supported can vary with the processor type, and the
167 * 8260 family can have up to 64.
168 * External interrupts can be either edge or level triggered, and
169 * need to be initialized by the appropriate driver.
176 /* Initialize the default interrupt mapping priorities,
177 * in case the boot rom changed something on us.
179 cpm2_immr
->im_intctl
.ic_siprr
= 0x05309770;
181 #if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
182 /* Initialize stuff for the 82xx CPLD IC and install demux */
191 static unsigned long __init
192 m8260_find_end_of_memory(void)
194 bd_t
*binfo
= (bd_t
*)__res
;
196 return binfo
->bi_memsize
;
199 /* Map the IMMR, plus anything else we can cover
200 * in that upper space according to the memory controller
201 * chip select mapping. Grab another bunch of space
202 * below that for stuff we can't cover in the upper.
209 /* Map IMMR region to a 256MB BAT */
210 addr
= (cpm2_immr
!= NULL
) ? (uint
)cpm2_immr
: CPM_MAP_ADDR
;
211 io_block_mapping(addr
, addr
, 0x10000000, _PAGE_IO
);
213 /* Map I/O region to a 256MB BAT */
214 io_block_mapping(IO_VIRT_ADDR
, IO_PHYS_ADDR
, 0x10000000, _PAGE_IO
);
217 /* Place-holder for board-specific ppc_md hooking */
218 void __attribute__ ((weak
)) __init
219 m82xx_board_init(void)
224 * r3 - Optional pointer to a board information structure.
225 * r4 - Optional pointer to the physical starting address of the init RAM
227 * r5 - Optional pointer to the physical ending address of the init RAM
229 * r6 - Optional pointer to the physical starting address of any kernel
230 * command-line parameters.
231 * r7 - Optional pointer to the physical ending address of any kernel
232 * command-line parameters.
235 platform_init(unsigned long r3
, unsigned long r4
, unsigned long r5
,
236 unsigned long r6
, unsigned long r7
)
238 parse_bootinfo(find_bootinfo());
241 memcpy( (void *)__res
,(void *)(r3
+KERNELBASE
), sizeof(bd_t
) );
243 #ifdef CONFIG_BLK_DEV_INITRD
244 /* take care of initrd if we have one */
246 initrd_start
= r4
+ KERNELBASE
;
247 initrd_end
= r5
+ KERNELBASE
;
249 #endif /* CONFIG_BLK_DEV_INITRD */
250 /* take care of cmd line */
252 *(char *)(r7
+KERNELBASE
) = 0;
253 strcpy(cmd_line
, (char *)(r6
+KERNELBASE
));
256 ppc_md
.setup_arch
= m8260_setup_arch
;
257 ppc_md
.show_cpuinfo
= m8260_show_cpuinfo
;
258 ppc_md
.init_IRQ
= m8260_init_IRQ
;
259 ppc_md
.get_irq
= cpm2_get_irq
;
261 ppc_md
.restart
= m8260_restart
;
262 ppc_md
.power_off
= m8260_power_off
;
263 ppc_md
.halt
= m8260_halt
;
265 ppc_md
.set_rtc_time
= m8260_set_rtc_time
;
266 ppc_md
.get_rtc_time
= m8260_get_rtc_time
;
267 ppc_md
.calibrate_decr
= m8260_calibrate_decr
;
269 ppc_md
.find_end_of_memory
= m8260_find_end_of_memory
;
270 ppc_md
.setup_io_mappings
= m8260_map_io
;
272 /* Call back for board-specific settings and overrides. */