usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / watchdog / intel_scu_watchdog.c
blob1abdc0454c54ff847d3d5159583f396fb2c6baff
1 /*
2 * Intel_SCU 0.2: An Intel SCU IOH Based Watchdog Device
3 * for Intel part #(s):
4 * - AF82MP20 PCH
6 * Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of version 2 of the GNU General
10 * Public License as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be
13 * useful, but WITHOUT ANY WARRANTY; without even the implied
14 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
15 * PURPOSE. See the GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 59 Temple Place - Suite 330,
19 * Boston, MA 02111-1307, USA.
20 * The full GNU General Public License is included in this
21 * distribution in the file called COPYING.
25 #include <linux/compiler.h>
26 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/moduleparam.h>
29 #include <linux/types.h>
30 #include <linux/miscdevice.h>
31 #include <linux/watchdog.h>
32 #include <linux/fs.h>
33 #include <linux/notifier.h>
34 #include <linux/reboot.h>
35 #include <linux/init.h>
36 #include <linux/jiffies.h>
37 #include <linux/uaccess.h>
38 #include <linux/slab.h>
39 #include <linux/io.h>
40 #include <linux/interrupt.h>
41 #include <linux/delay.h>
42 #include <linux/sched.h>
43 #include <linux/signal.h>
44 #include <linux/sfi.h>
45 #include <asm/irq.h>
46 #include <linux/atomic.h>
47 #include <asm/intel_scu_ipc.h>
48 #include <asm/apb_timer.h>
49 #include <asm/mrst.h>
51 #include "intel_scu_watchdog.h"
53 /* Bounds number of times we will retry loading time count */
54 /* This retry is a work around for a silicon bug. */
55 #define MAX_RETRY 16
57 #define IPC_SET_WATCHDOG_TIMER 0xF8
59 static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN;
60 module_param(timer_margin, int, 0);
61 MODULE_PARM_DESC(timer_margin,
62 "Watchdog timer margin"
63 "Time between interrupt and resetting the system"
64 "The range is from 1 to 160"
65 "This is the time for all keep alives to arrive");
67 static int timer_set = DEFAULT_TIME;
68 module_param(timer_set, int, 0);
69 MODULE_PARM_DESC(timer_set,
70 "Default Watchdog timer setting"
71 "Complete cycle time"
72 "The range is from 1 to 170"
73 "This is the time for all keep alives to arrive");
75 /* After watchdog device is closed, check force_boot. If:
76 * force_boot == 0, then force boot on next watchdog interrupt after close,
77 * force_boot == 1, then force boot immediately when device is closed.
79 static int force_boot;
80 module_param(force_boot, int, 0);
81 MODULE_PARM_DESC(force_boot,
82 "A value of 1 means that the driver will reboot"
83 "the system immediately if the /dev/watchdog device is closed"
84 "A value of 0 means that when /dev/watchdog device is closed"
85 "the watchdog timer will be refreshed for one more interval"
86 "of length: timer_set. At the end of this interval, the"
87 "watchdog timer will reset the system."
90 /* there is only one device in the system now; this can be made into
91 * an array in the future if we have more than one device */
93 static struct intel_scu_watchdog_dev watchdog_device;
95 /* Forces restart, if force_reboot is set */
96 static void watchdog_fire(void)
98 if (force_boot) {
99 printk(KERN_CRIT PFX "Initiating system reboot.\n");
100 emergency_restart();
101 printk(KERN_CRIT PFX "Reboot didn't ?????\n");
104 else {
105 printk(KERN_CRIT PFX "Immediate Reboot Disabled\n");
106 printk(KERN_CRIT PFX
107 "System will reset when watchdog timer times out!\n");
111 static int check_timer_margin(int new_margin)
113 if ((new_margin < MIN_TIME_CYCLE) ||
114 (new_margin > MAX_TIME - timer_set)) {
115 pr_debug("Watchdog timer: value of new_margin %d is out of the range %d to %d\n",
116 new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set);
117 return -EINVAL;
119 return 0;
123 * IPC operations
125 static int watchdog_set_ipc(int soft_threshold, int threshold)
127 u32 *ipc_wbuf;
128 u8 cbuf[16] = { '\0' };
129 int ipc_ret = 0;
131 ipc_wbuf = (u32 *)&cbuf;
132 ipc_wbuf[0] = soft_threshold;
133 ipc_wbuf[1] = threshold;
135 ipc_ret = intel_scu_ipc_command(
136 IPC_SET_WATCHDOG_TIMER,
138 ipc_wbuf,
140 NULL,
143 if (ipc_ret != 0)
144 pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
146 return ipc_ret;
150 * Intel_SCU operations
153 /* timer interrupt handler */
154 static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id)
156 int int_status;
157 int_status = ioread32(watchdog_device.timer_interrupt_status_addr);
159 pr_debug("Watchdog timer: irq, int_status: %x\n", int_status);
161 if (int_status != 0)
162 return IRQ_NONE;
164 /* has the timer been started? If not, then this is spurious */
165 if (watchdog_device.timer_started == 0) {
166 pr_debug("Watchdog timer: spurious interrupt received\n");
167 return IRQ_HANDLED;
170 /* temporarily disable the timer */
171 iowrite32(0x00000002, watchdog_device.timer_control_addr);
173 /* set the timer to the threshold */
174 iowrite32(watchdog_device.threshold,
175 watchdog_device.timer_load_count_addr);
177 /* allow the timer to run */
178 iowrite32(0x00000003, watchdog_device.timer_control_addr);
180 return IRQ_HANDLED;
183 static int intel_scu_keepalive(void)
186 /* read eoi register - clears interrupt */
187 ioread32(watchdog_device.timer_clear_interrupt_addr);
189 /* temporarily disable the timer */
190 iowrite32(0x00000002, watchdog_device.timer_control_addr);
192 /* set the timer to the soft_threshold */
193 iowrite32(watchdog_device.soft_threshold,
194 watchdog_device.timer_load_count_addr);
196 /* allow the timer to run */
197 iowrite32(0x00000003, watchdog_device.timer_control_addr);
199 return 0;
202 static int intel_scu_stop(void)
204 iowrite32(0, watchdog_device.timer_control_addr);
205 return 0;
208 static int intel_scu_set_heartbeat(u32 t)
210 int ipc_ret;
211 int retry_count;
212 u32 soft_value;
213 u32 hw_pre_value;
214 u32 hw_value;
216 watchdog_device.timer_set = t;
217 watchdog_device.threshold =
218 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
219 watchdog_device.soft_threshold =
220 (watchdog_device.timer_set - timer_margin)
221 * watchdog_device.timer_tbl_ptr->freq_hz;
223 pr_debug("Watchdog timer: set_heartbeat: timer freq is %d\n",
224 watchdog_device.timer_tbl_ptr->freq_hz);
225 pr_debug("Watchdog timer: set_heartbeat: timer_set is %x (hex)\n",
226 watchdog_device.timer_set);
227 pr_debug("Watchdog timer: set_hearbeat: timer_margin is %x (hex)\n",
228 timer_margin);
229 pr_debug("Watchdog timer: set_heartbeat: threshold is %x (hex)\n",
230 watchdog_device.threshold);
231 pr_debug("Watchdog timer: set_heartbeat: soft_threshold is %x (hex)\n",
232 watchdog_device.soft_threshold);
234 /* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */
235 /* watchdog timing come out right. */
236 watchdog_device.threshold =
237 watchdog_device.threshold / FREQ_ADJUSTMENT;
238 watchdog_device.soft_threshold =
239 watchdog_device.soft_threshold / FREQ_ADJUSTMENT;
241 /* temporarily disable the timer */
242 iowrite32(0x00000002, watchdog_device.timer_control_addr);
244 /* send the threshold and soft_threshold via IPC to the processor */
245 ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold,
246 watchdog_device.threshold);
248 if (ipc_ret != 0) {
249 /* Make sure the watchdog timer is stopped */
250 intel_scu_stop();
251 return ipc_ret;
254 /* Soft Threshold set loop. Early versions of silicon did */
255 /* not always set this count correctly. This loop checks */
256 /* the value and retries if it was not set correctly. */
258 retry_count = 0;
259 soft_value = watchdog_device.soft_threshold & 0xFFFF0000;
260 do {
262 /* Make sure timer is stopped */
263 intel_scu_stop();
265 if (MAX_RETRY < retry_count++) {
266 /* Unable to set timer value */
267 pr_err("Watchdog timer: Unable to set timer\n");
268 return -ENODEV;
271 /* set the timer to the soft threshold */
272 iowrite32(watchdog_device.soft_threshold,
273 watchdog_device.timer_load_count_addr);
275 /* read count value before starting timer */
276 hw_pre_value = ioread32(watchdog_device.timer_load_count_addr);
277 hw_pre_value = hw_pre_value & 0xFFFF0000;
279 /* Start the timer */
280 iowrite32(0x00000003, watchdog_device.timer_control_addr);
282 /* read the value the time loaded into its count reg */
283 hw_value = ioread32(watchdog_device.timer_load_count_addr);
284 hw_value = hw_value & 0xFFFF0000;
287 } while (soft_value != hw_value);
289 watchdog_device.timer_started = 1;
291 return 0;
295 * /dev/watchdog handling
298 static int intel_scu_open(struct inode *inode, struct file *file)
301 /* Set flag to indicate that watchdog device is open */
302 if (test_and_set_bit(0, &watchdog_device.driver_open))
303 return -EBUSY;
305 /* Check for reopen of driver. Reopens are not allowed */
306 if (watchdog_device.driver_closed)
307 return -EPERM;
309 return nonseekable_open(inode, file);
312 static int intel_scu_release(struct inode *inode, struct file *file)
315 * This watchdog should not be closed, after the timer
316 * is started with the WDIPC_SETTIMEOUT ioctl
317 * If force_boot is set watchdog_fire() will cause an
318 * immediate reset. If force_boot is not set, the watchdog
319 * timer is refreshed for one more interval. At the end
320 * of that interval, the watchdog timer will reset the system.
323 if (!test_and_clear_bit(0, &watchdog_device.driver_open)) {
324 pr_debug("Watchdog timer: intel_scu_release, without open\n");
325 return -ENOTTY;
328 if (!watchdog_device.timer_started) {
329 /* Just close, since timer has not been started */
330 pr_debug("Watchdog timer: closed, without starting timer\n");
331 return 0;
334 printk(KERN_CRIT PFX
335 "Unexpected close of /dev/watchdog!\n");
337 /* Since the timer was started, prevent future reopens */
338 watchdog_device.driver_closed = 1;
340 /* Refresh the timer for one more interval */
341 intel_scu_keepalive();
343 /* Reboot system (if force_boot is set) */
344 watchdog_fire();
346 /* We should only reach this point if force_boot is not set */
347 return 0;
350 static ssize_t intel_scu_write(struct file *file,
351 char const *data,
352 size_t len,
353 loff_t *ppos)
356 if (watchdog_device.timer_started)
357 /* Watchdog already started, keep it alive */
358 intel_scu_keepalive();
359 else
360 /* Start watchdog with timer value set by init */
361 intel_scu_set_heartbeat(watchdog_device.timer_set);
363 return len;
366 static long intel_scu_ioctl(struct file *file,
367 unsigned int cmd,
368 unsigned long arg)
370 void __user *argp = (void __user *)arg;
371 u32 __user *p = argp;
372 u32 new_margin;
375 static const struct watchdog_info ident = {
376 .options = WDIOF_SETTIMEOUT
377 | WDIOF_KEEPALIVEPING,
378 .firmware_version = 0, /* @todo Get from SCU via
379 ipc_get_scu_fw_version()? */
380 .identity = "Intel_SCU IOH Watchdog" /* len < 32 */
383 switch (cmd) {
384 case WDIOC_GETSUPPORT:
385 return copy_to_user(argp,
386 &ident,
387 sizeof(ident)) ? -EFAULT : 0;
388 case WDIOC_GETSTATUS:
389 case WDIOC_GETBOOTSTATUS:
390 return put_user(0, p);
391 case WDIOC_KEEPALIVE:
392 intel_scu_keepalive();
394 return 0;
395 case WDIOC_SETTIMEOUT:
396 if (get_user(new_margin, p))
397 return -EFAULT;
399 if (check_timer_margin(new_margin))
400 return -EINVAL;
402 if (intel_scu_set_heartbeat(new_margin))
403 return -EINVAL;
404 return 0;
405 case WDIOC_GETTIMEOUT:
406 return put_user(watchdog_device.soft_threshold, p);
408 default:
409 return -ENOTTY;
414 * Notifier for system down
416 static int intel_scu_notify_sys(struct notifier_block *this,
417 unsigned long code,
418 void *another_unused)
420 if (code == SYS_DOWN || code == SYS_HALT)
421 /* Turn off the watchdog timer. */
422 intel_scu_stop();
423 return NOTIFY_DONE;
427 * Kernel Interfaces
429 static const struct file_operations intel_scu_fops = {
430 .owner = THIS_MODULE,
431 .llseek = no_llseek,
432 .write = intel_scu_write,
433 .unlocked_ioctl = intel_scu_ioctl,
434 .open = intel_scu_open,
435 .release = intel_scu_release,
438 static int __init intel_scu_watchdog_init(void)
440 int ret;
441 u32 __iomem *tmp_addr;
444 * We don't really need to check this as the SFI timer get will fail
445 * but if we do so we can exit with a clearer reason and no noise.
447 * If it isn't an intel MID device then it doesn't have this watchdog
449 if (!mrst_identify_cpu())
450 return -ENODEV;
452 /* Check boot parameters to verify that their initial values */
453 /* are in range. */
454 /* Check value of timer_set boot parameter */
455 if ((timer_set < MIN_TIME_CYCLE) ||
456 (timer_set > MAX_TIME - MIN_TIME_CYCLE)) {
457 pr_err("Watchdog timer: value of timer_set %x (hex) "
458 "is out of range from %x to %x (hex)\n",
459 timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE);
460 return -EINVAL;
463 /* Check value of timer_margin boot parameter */
464 if (check_timer_margin(timer_margin))
465 return -EINVAL;
467 watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
469 if (watchdog_device.timer_tbl_ptr == NULL) {
470 pr_debug("Watchdog timer - Intel SCU watchdog: timer is not available\n");
471 return -ENODEV;
473 /* make sure the timer exists */
474 if (watchdog_device.timer_tbl_ptr->phys_addr == 0) {
475 pr_debug("Watchdog timer - Intel SCU watchdog - timer %d does not have valid physical memory\n",
476 sfi_mtimer_num);
477 return -ENODEV;
480 if (watchdog_device.timer_tbl_ptr->irq == 0) {
481 pr_debug("Watchdog timer: timer %d invalid irq\n",
482 sfi_mtimer_num);
483 return -ENODEV;
486 tmp_addr = ioremap_nocache(watchdog_device.timer_tbl_ptr->phys_addr,
487 20);
489 if (tmp_addr == NULL) {
490 pr_debug("Watchdog timer: timer unable to ioremap\n");
491 return -ENOMEM;
494 watchdog_device.timer_load_count_addr = tmp_addr++;
495 watchdog_device.timer_current_value_addr = tmp_addr++;
496 watchdog_device.timer_control_addr = tmp_addr++;
497 watchdog_device.timer_clear_interrupt_addr = tmp_addr++;
498 watchdog_device.timer_interrupt_status_addr = tmp_addr++;
500 /* Set the default time values in device structure */
502 watchdog_device.timer_set = timer_set;
503 watchdog_device.threshold =
504 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
505 watchdog_device.soft_threshold =
506 (watchdog_device.timer_set - timer_margin)
507 * watchdog_device.timer_tbl_ptr->freq_hz;
510 watchdog_device.intel_scu_notifier.notifier_call =
511 intel_scu_notify_sys;
513 ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier);
514 if (ret) {
515 pr_err("Watchdog timer: cannot register notifier %d)\n", ret);
516 goto register_reboot_error;
519 watchdog_device.miscdev.minor = WATCHDOG_MINOR;
520 watchdog_device.miscdev.name = "watchdog";
521 watchdog_device.miscdev.fops = &intel_scu_fops;
523 ret = misc_register(&watchdog_device.miscdev);
524 if (ret) {
525 pr_err("Watchdog timer: cannot register miscdev %d err =%d\n",
526 WATCHDOG_MINOR, ret);
527 goto misc_register_error;
530 ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq,
531 watchdog_timer_interrupt,
532 IRQF_SHARED, "watchdog",
533 &watchdog_device.timer_load_count_addr);
534 if (ret) {
535 pr_err("Watchdog timer: error requesting irq %d\n", ret);
536 goto request_irq_error;
538 /* Make sure timer is disabled before returning */
539 intel_scu_stop();
540 return 0;
542 /* error cleanup */
544 request_irq_error:
545 misc_deregister(&watchdog_device.miscdev);
546 misc_register_error:
547 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
548 register_reboot_error:
549 intel_scu_stop();
550 iounmap(watchdog_device.timer_load_count_addr);
551 return ret;
554 static void __exit intel_scu_watchdog_exit(void)
557 misc_deregister(&watchdog_device.miscdev);
558 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
559 /* disable the timer */
560 iowrite32(0x00000002, watchdog_device.timer_control_addr);
561 iounmap(watchdog_device.timer_load_count_addr);
564 late_initcall(intel_scu_watchdog_init);
565 module_exit(intel_scu_watchdog_exit);
567 MODULE_AUTHOR("Intel Corporation");
568 MODULE_DESCRIPTION("Intel SCU Watchdog Device Driver");
569 MODULE_LICENSE("GPL");
570 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
571 MODULE_VERSION(WDT_VER);