?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
thp: madvise(MADV_NOHUGEPAGE)
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / atmel_serial.c
blob2a1d52fb493646b2c56648aef28d5e24e6805126
1 /*
2 * linux/drivers/char/atmel_serial.c
3 *
4 * Driver for Atmel AT91 / AT32 Serial ports
5 * Copyright (C) 2003 Rick Bronson
6 *
7 * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
8 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
9 *
10 * DMA support added by Chip Coldwell.
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 *
26 */
27 #include <linux/module.h>
28 #include <linux/tty.h>
29 #include <linux/ioport.h>
30 #include <linux/slab.h>
31 #include <linux/init.h>
32 #include <linux/serial.h>
33 #include <linux/clk.h>
34 #include <linux/console.h>
35 #include <linux/sysrq.h>
36 #include <linux/tty_flip.h>
37 #include <linux/platform_device.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/atmel_pdc.h>
40 #include <linux/atmel_serial.h>
41 #include <linux/uaccess.h>
42
43 #include <asm/io.h>
44 #include <asm/ioctls.h>
45
46 #include <asm/mach/serial_at91.h>
47 #include <mach/board.h>
48
49 #ifdef CONFIG_ARM
50 #include <mach/cpu.h>
51 #include <mach/gpio.h>
52 #endif
53
54 #define PDC_BUFFER_SIZE 512
55 /* Revisit: We should calculate this based on the actual port settings */
56 #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
57
58 #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
59 #define SUPPORT_SYSRQ
60 #endif
61
62 #include <linux/serial_core.h>
63
64 static void atmel_start_rx(struct uart_port *port);
65 static void atmel_stop_rx(struct uart_port *port);
66
67 #ifdef CONFIG_SERIAL_ATMEL_TTYAT
68
69 /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
70 * should coexist with the 8250 driver, such as if we have an external 16C550
71 * UART. */
72 #define SERIAL_ATMEL_MAJOR 204
73 #define MINOR_START 154
74 #define ATMEL_DEVICENAME "ttyAT"
75
76 #else
77
78 /* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
79 * name, but it is legally reserved for the 8250 driver. */
80 #define SERIAL_ATMEL_MAJOR TTY_MAJOR
81 #define MINOR_START 64
82 #define ATMEL_DEVICENAME "ttyS"
83
84 #endif
85
86 #define ATMEL_ISR_PASS_LIMIT 256
87
88 /* UART registers. CR is write-only, hence no GET macro */
89 #define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
90 #define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
91 #define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
92 #define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
93 #define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
94 #define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
95 #define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
96 #define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
97 #define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
98 #define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
99 #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
100 #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
101 #define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
102
103 /* PDC registers */
104 #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
105 #define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
106
107 #define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
108 #define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
109 #define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
110 #define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
111 #define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
112
113 #define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
114 #define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
115 #define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
116
117 static int (*atmel_open_hook)(struct uart_port *);
118 static void (*atmel_close_hook)(struct uart_port *);
119
120 struct atmel_dma_buffer {
121 unsigned char *buf;
122 dma_addr_t dma_addr;
123 unsigned int dma_size;
124 unsigned int ofs;
125 };
126
127 struct atmel_uart_char {
128 u16 status;
129 u16 ch;
130 };
131
132 #define ATMEL_SERIAL_RINGSIZE 1024
133
134 /*
135 * We wrap our port structure around the generic uart_port.
136 */
137 struct atmel_uart_port {
138 struct uart_port uart; /* uart */
139 struct clk *clk; /* uart clock */
140 int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
141 u32 backup_imr; /* IMR saved during suspend */
142 int break_active; /* break being received */
143
144 short use_dma_rx; /* enable PDC receiver */
145 short pdc_rx_idx; /* current PDC RX buffer */
146 struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
147
148 short use_dma_tx; /* enable PDC transmitter */
149 struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
150
151 struct tasklet_struct tasklet;
152 unsigned int irq_status;
153 unsigned int irq_status_prev;
154
155 struct circ_buf rx_ring;
156
157 struct serial_rs485 rs485; /* rs485 settings */
158 unsigned int tx_done_mask;
159 };
160
161 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
162
163 #ifdef SUPPORT_SYSRQ
164 static struct console atmel_console;
165 #endif
166
167 static inline struct atmel_uart_port *
168 to_atmel_uart_port(struct uart_port *uart)
169 {
170 return container_of(uart, struct atmel_uart_port, uart);
171 }
172
173 #ifdef CONFIG_SERIAL_ATMEL_PDC
174 static bool atmel_use_dma_rx(struct uart_port *port)
175 {
176 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
177
178 return atmel_port->use_dma_rx;
179 }
180
181 static bool atmel_use_dma_tx(struct uart_port *port)
182 {
183 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
184
185 return atmel_port->use_dma_tx;
186 }
187 #else
188 static bool atmel_use_dma_rx(struct uart_port *port)
189 {
190 return false;
191 }
192
193 static bool atmel_use_dma_tx(struct uart_port *port)
194 {
195 return false;
196 }
197 #endif
198
199 /* Enable or disable the rs485 support */
200 void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
201 {
202 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
203 unsigned int mode;
204
205 spin_lock(&port->lock);
206
207 /* Disable interrupts */
208 UART_PUT_IDR(port, atmel_port->tx_done_mask);
209
210 mode = UART_GET_MR(port);
211
212 /* Resetting serial mode to RS232 (0x0) */
213 mode &= ~ATMEL_US_USMODE;
214
215 atmel_port->rs485 = *rs485conf;
216
217 if (rs485conf->flags & SER_RS485_ENABLED) {
218 dev_dbg(port->dev, "Setting UART to RS485\n");
219 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
220 if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
221 UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
222 mode |= ATMEL_US_USMODE_RS485;
223 } else {
224 dev_dbg(port->dev, "Setting UART to RS232\n");
225 if (atmel_use_dma_tx(port))
226 atmel_port->tx_done_mask = ATMEL_US_ENDTX |
227 ATMEL_US_TXBUFE;
228 else
229 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
230 }
231 UART_PUT_MR(port, mode);
232
233 /* Enable interrupts */
234 UART_PUT_IER(port, atmel_port->tx_done_mask);
235
236 spin_unlock(&port->lock);
237
238 }
239
240 /*
241 * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
242 */
243 static u_int atmel_tx_empty(struct uart_port *port)
244 {
245 return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
246 }
247
248 /*
249 * Set state of the modem control output lines
250 */
251 static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
252 {
253 unsigned int control = 0;
254 unsigned int mode;
255 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
256
257 #ifdef CONFIG_ARCH_AT91RM9200
258 if (cpu_is_at91rm9200()) {
259 /*
260 * AT91RM9200 Errata #39: RTS0 is not internally connected
261 * to PA21. We need to drive the pin manually.
262 */
263 if (port->mapbase == AT91RM9200_BASE_US0) {
264 if (mctrl & TIOCM_RTS)
265 at91_set_gpio_value(AT91_PIN_PA21, 0);
266 else
267 at91_set_gpio_value(AT91_PIN_PA21, 1);
268 }
269 }
270 #endif
271
272 if (mctrl & TIOCM_RTS)
273 control |= ATMEL_US_RTSEN;
274 else
275 control |= ATMEL_US_RTSDIS;
276
277 if (mctrl & TIOCM_DTR)
278 control |= ATMEL_US_DTREN;
279 else
280 control |= ATMEL_US_DTRDIS;
281
282 UART_PUT_CR(port, control);
283
284 /* Local loopback mode? */
285 mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
286 if (mctrl & TIOCM_LOOP)
287 mode |= ATMEL_US_CHMODE_LOC_LOOP;
288 else
289 mode |= ATMEL_US_CHMODE_NORMAL;
290
291 /* Resetting serial mode to RS232 (0x0) */
292 mode &= ~ATMEL_US_USMODE;
293
294 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
295 dev_dbg(port->dev, "Setting UART to RS485\n");
296 if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
297 UART_PUT_TTGR(port,
298 atmel_port->rs485.delay_rts_after_send);
299 mode |= ATMEL_US_USMODE_RS485;
300 } else {
301 dev_dbg(port->dev, "Setting UART to RS232\n");
302 }
303 UART_PUT_MR(port, mode);
304 }
305
306 /*
307 * Get state of the modem control input lines
308 */
309 static u_int atmel_get_mctrl(struct uart_port *port)
310 {
311 unsigned int status, ret = 0;
312
313 status = UART_GET_CSR(port);
314
315 /*
316 * The control signals are active low.
317 */
318 if (!(status & ATMEL_US_DCD))
319 ret |= TIOCM_CD;
320 if (!(status & ATMEL_US_CTS))
321 ret |= TIOCM_CTS;
322 if (!(status & ATMEL_US_DSR))
323 ret |= TIOCM_DSR;
324 if (!(status & ATMEL_US_RI))
325 ret |= TIOCM_RI;
326
327 return ret;
328 }
329
330 /*
331 * Stop transmitting.
332 */
333 static void atmel_stop_tx(struct uart_port *port)
334 {
335 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
336
337 if (atmel_use_dma_tx(port)) {
338 /* disable PDC transmit */
339 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
340 }
341 /* Disable interrupts */
342 UART_PUT_IDR(port, atmel_port->tx_done_mask);
343
344 if (atmel_port->rs485.flags & SER_RS485_ENABLED)
345 atmel_start_rx(port);
346 }
347
348 /*
349 * Start transmitting.
350 */
351 static void atmel_start_tx(struct uart_port *port)
352 {
353 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
354
355 if (atmel_use_dma_tx(port)) {
356 if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
357 /* The transmitter is already running. Yes, we
358 really need this.*/
359 return;
360
361 if (atmel_port->rs485.flags & SER_RS485_ENABLED)
362 atmel_stop_rx(port);
363
364 /* re-enable PDC transmit */
365 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
366 }
367 /* Enable interrupts */
368 UART_PUT_IER(port, atmel_port->tx_done_mask);
369 }
370
371 /*
372 * start receiving - port is in process of being opened.
373 */
374 static void atmel_start_rx(struct uart_port *port)
375 {
376 UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
377
378 if (atmel_use_dma_rx(port)) {
379 /* enable PDC controller */
380 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
381 port->read_status_mask);
382 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
383 } else {
384 UART_PUT_IER(port, ATMEL_US_RXRDY);
385 }
386 }
387
388 /*
389 * Stop receiving - port is in process of being closed.
390 */
391 static void atmel_stop_rx(struct uart_port *port)
392 {
393 if (atmel_use_dma_rx(port)) {
394 /* disable PDC receive */
395 UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
396 UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
397 port->read_status_mask);
398 } else {
399 UART_PUT_IDR(port, ATMEL_US_RXRDY);
400 }
401 }
402
403 /*
404 * Enable modem status interrupts
405 */
406 static void atmel_enable_ms(struct uart_port *port)
407 {
408 UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
409 | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
410 }
411
412 /*
413 * Control the transmission of a break signal
414 */
415 static void atmel_break_ctl(struct uart_port *port, int break_state)
416 {
417 if (break_state != 0)
418 UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
419 else
420 UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
421 }
422
423 /*
424 * Stores the incoming character in the ring buffer
425 */
426 static void
427 atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
428 unsigned int ch)
429 {
430 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
431 struct circ_buf *ring = &atmel_port->rx_ring;
432 struct atmel_uart_char *c;
433
434 if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
435 /* Buffer overflow, ignore char */
436 return;
437
438 c = &((struct atmel_uart_char *)ring->buf)[ring->head];
439 c->status = status;
440 c->ch = ch;
441
442 /* Make sure the character is stored before we update head. */
443 smp_wmb();
444
445 ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
446 }
447
448 /*
449 * Deal with parity, framing and overrun errors.
450 */
451 static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
452 {
453 /* clear error */
454 UART_PUT_CR(port, ATMEL_US_RSTSTA);
455
456 if (status & ATMEL_US_RXBRK) {
457 /* ignore side-effect */
458 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
459 port->icount.brk++;
460 }
461 if (status & ATMEL_US_PARE)
462 port->icount.parity++;
463 if (status & ATMEL_US_FRAME)
464 port->icount.frame++;
465 if (status & ATMEL_US_OVRE)
466 port->icount.overrun++;
467 }
468
469 /*
470 * Characters received (called from interrupt handler)
471 */
472 static void atmel_rx_chars(struct uart_port *port)
473 {
474 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
475 unsigned int status, ch;
476
477 status = UART_GET_CSR(port);
478 while (status & ATMEL_US_RXRDY) {
479 ch = UART_GET_CHAR(port);
480
481 /*
482 * note that the error handling code is
483 * out of the main execution path
484 */
485 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
486 | ATMEL_US_OVRE | ATMEL_US_RXBRK)
487 || atmel_port->break_active)) {
488
489 /* clear error */
490 UART_PUT_CR(port, ATMEL_US_RSTSTA);
491
492 if (status & ATMEL_US_RXBRK
493 && !atmel_port->break_active) {
494 atmel_port->break_active = 1;
495 UART_PUT_IER(port, ATMEL_US_RXBRK);
496 } else {
497 /*
498 * This is either the end-of-break
499 * condition or we've received at
500 * least one character without RXBRK
501 * being set. In both cases, the next
502 * RXBRK will indicate start-of-break.
503 */
504 UART_PUT_IDR(port, ATMEL_US_RXBRK);
505 status &= ~ATMEL_US_RXBRK;
506 atmel_port->break_active = 0;
507 }
508 }
509
510 atmel_buffer_rx_char(port, status, ch);
511 status = UART_GET_CSR(port);
512 }
513
514 tasklet_schedule(&atmel_port->tasklet);
515 }
516
517 /*
518 * Transmit characters (called from tasklet with TXRDY interrupt
519 * disabled)
520 */
521 static void atmel_tx_chars(struct uart_port *port)
522 {
523 struct circ_buf *xmit = &port->state->xmit;
524 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
525
526 if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
527 UART_PUT_CHAR(port, port->x_char);
528 port->icount.tx++;
529 port->x_char = 0;
530 }
531 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
532 return;
533
534 while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
535 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
536 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
537 port->icount.tx++;
538 if (uart_circ_empty(xmit))
539 break;
540 }
541
542 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
543 uart_write_wakeup(port);
544
545 if (!uart_circ_empty(xmit))
546 /* Enable interrupts */
547 UART_PUT_IER(port, atmel_port->tx_done_mask);
548 }
549
550 /*
551 * receive interrupt handler.
552 */
553 static void
554 atmel_handle_receive(struct uart_port *port, unsigned int pending)
555 {
556 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
557
558 if (atmel_use_dma_rx(port)) {
559 /*
560 * PDC receive. Just schedule the tasklet and let it
561 * figure out the details.
562 *
563 * TODO: We're not handling error flags correctly at
564 * the moment.
565 */
566 if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
567 UART_PUT_IDR(port, (ATMEL_US_ENDRX
568 | ATMEL_US_TIMEOUT));
569 tasklet_schedule(&atmel_port->tasklet);
570 }
571
572 if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
573 ATMEL_US_FRAME | ATMEL_US_PARE))
574 atmel_pdc_rxerr(port, pending);
575 }
576
577 /* Interrupt receive */
578 if (pending & ATMEL_US_RXRDY)
579 atmel_rx_chars(port);
580 else if (pending & ATMEL_US_RXBRK) {
581 /*
582 * End of break detected. If it came along with a
583 * character, atmel_rx_chars will handle it.
584 */
585 UART_PUT_CR(port, ATMEL_US_RSTSTA);
586 UART_PUT_IDR(port, ATMEL_US_RXBRK);
587 atmel_port->break_active = 0;
588 }
589 }
590
591 /*
592 * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
593 */
594 static void
595 atmel_handle_transmit(struct uart_port *port, unsigned int pending)
596 {
597 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
598
599 if (pending & atmel_port->tx_done_mask) {
600 /* Either PDC or interrupt transmission */
601 UART_PUT_IDR(port, atmel_port->tx_done_mask);
602 tasklet_schedule(&atmel_port->tasklet);
603 }
604 }
605
606 /*
607 * status flags interrupt handler.
608 */
609 static void
610 atmel_handle_status(struct uart_port *port, unsigned int pending,
611 unsigned int status)
612 {
613 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
614
615 if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
616 | ATMEL_US_CTSIC)) {
617 atmel_port->irq_status = status;
618 tasklet_schedule(&atmel_port->tasklet);
619 }
620 }
621
622 /*
623 * Interrupt handler
624 */
625 static irqreturn_t atmel_interrupt(int irq, void *dev_id)
626 {
627 struct uart_port *port = dev_id;
628 unsigned int status, pending, pass_counter = 0;
629
630 do {
631 status = UART_GET_CSR(port);
632 pending = status & UART_GET_IMR(port);
633 if (!pending)
634 break;
635
636 atmel_handle_receive(port, pending);
637 atmel_handle_status(port, pending, status);
638 atmel_handle_transmit(port, pending);
639 } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
640
641 return pass_counter ? IRQ_HANDLED : IRQ_NONE;
642 }
643
644 /*
645 * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
646 */
647 static void atmel_tx_dma(struct uart_port *port)
648 {
649 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
650 struct circ_buf *xmit = &port->state->xmit;
651 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
652 int count;
653
654 /* nothing left to transmit? */
655 if (UART_GET_TCR(port))
656 return;
657
658 xmit->tail += pdc->ofs;
659 xmit->tail &= UART_XMIT_SIZE - 1;
660
661 port->icount.tx += pdc->ofs;
662 pdc->ofs = 0;
663
664 /* more to transmit - setup next transfer */
665
666 /* disable PDC transmit */
667 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
668
669 if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
670 dma_sync_single_for_device(port->dev,
671 pdc->dma_addr,
672 pdc->dma_size,
673 DMA_TO_DEVICE);
674
675 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
676 pdc->ofs = count;
677
678 UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
679 UART_PUT_TCR(port, count);
680 /* re-enable PDC transmit */
681 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
682 /* Enable interrupts */
683 UART_PUT_IER(port, atmel_port->tx_done_mask);
684 } else {
685 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
686 /* DMA done, stop TX, start RX for RS485 */
687 atmel_start_rx(port);
688 }
689 }
690
691 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
692 uart_write_wakeup(port);
693 }
694
695 static void atmel_rx_from_ring(struct uart_port *port)
696 {
697 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
698 struct circ_buf *ring = &atmel_port->rx_ring;
699 unsigned int flg;
700 unsigned int status;
701
702 while (ring->head != ring->tail) {
703 struct atmel_uart_char c;
704
705 /* Make sure c is loaded after head. */
706 smp_rmb();
707
708 c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
709
710 ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
711
712 port->icount.rx++;
713 status = c.status;
714 flg = TTY_NORMAL;
715
716 /*
717 * note that the error handling code is
718 * out of the main execution path
719 */
720 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
721 | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
722 if (status & ATMEL_US_RXBRK) {
723 /* ignore side-effect */
724 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
725
726 port->icount.brk++;
727 if (uart_handle_break(port))
728 continue;
729 }
730 if (status & ATMEL_US_PARE)
731 port->icount.parity++;
732 if (status & ATMEL_US_FRAME)
733 port->icount.frame++;
734 if (status & ATMEL_US_OVRE)
735 port->icount.overrun++;
736
737 status &= port->read_status_mask;
738
739 if (status & ATMEL_US_RXBRK)
740 flg = TTY_BREAK;
741 else if (status & ATMEL_US_PARE)
742 flg = TTY_PARITY;
743 else if (status & ATMEL_US_FRAME)
744 flg = TTY_FRAME;
745 }
746
747
748 if (uart_handle_sysrq_char(port, c.ch))
749 continue;
750
751 uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
752 }
753
754 /*
755 * Drop the lock here since it might end up calling
756 * uart_start(), which takes the lock.
757 */
758 spin_unlock(&port->lock);
759 tty_flip_buffer_push(port->state->port.tty);
760 spin_lock(&port->lock);
761 }
762
763 static void atmel_rx_from_dma(struct uart_port *port)
764 {
765 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
766 struct tty_struct *tty = port->state->port.tty;
767 struct atmel_dma_buffer *pdc;
768 int rx_idx = atmel_port->pdc_rx_idx;
769 unsigned int head;
770 unsigned int tail;
771 unsigned int count;
772
773 do {
774 /* Reset the UART timeout early so that we don't miss one */
775 UART_PUT_CR(port, ATMEL_US_STTTO);
776
777 pdc = &atmel_port->pdc_rx[rx_idx];
778 head = UART_GET_RPR(port) - pdc->dma_addr;
779 tail = pdc->ofs;
780
781 /* If the PDC has switched buffers, RPR won't contain
782 * any address within the current buffer. Since head
783 * is unsigned, we just need a one-way comparison to
784 * find out.
785 *
786 * In this case, we just need to consume the entire
787 * buffer and resubmit it for DMA. This will clear the
788 * ENDRX bit as well, so that we can safely re-enable
789 * all interrupts below.
790 */
791 head = min(head, pdc->dma_size);
792
793 if (likely(head != tail)) {
794 dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
795 pdc->dma_size, DMA_FROM_DEVICE);
796
797 /*
798 * head will only wrap around when we recycle
799 * the DMA buffer, and when that happens, we
800 * explicitly set tail to 0. So head will
801 * always be greater than tail.
802 */
803 count = head - tail;
804
805 tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
806
807 dma_sync_single_for_device(port->dev, pdc->dma_addr,
808 pdc->dma_size, DMA_FROM_DEVICE);
809
810 port->icount.rx += count;
811 pdc->ofs = head;
812 }
813
814 /*
815 * If the current buffer is full, we need to check if
816 * the next one contains any additional data.
817 */
818 if (head >= pdc->dma_size) {
819 pdc->ofs = 0;
820 UART_PUT_RNPR(port, pdc->dma_addr);
821 UART_PUT_RNCR(port, pdc->dma_size);
822
823 rx_idx = !rx_idx;
824 atmel_port->pdc_rx_idx = rx_idx;
825 }
826 } while (head >= pdc->dma_size);
827
828 /*
829 * Drop the lock here since it might end up calling
830 * uart_start(), which takes the lock.
831 */
832 spin_unlock(&port->lock);
833 tty_flip_buffer_push(tty);
834 spin_lock(&port->lock);
835
836 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
837 }
838
839 /*
840 * tasklet handling tty stuff outside the interrupt handler.
841 */
842 static void atmel_tasklet_func(unsigned long data)
843 {
844 struct uart_port *port = (struct uart_port *)data;
845 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
846 unsigned int status;
847 unsigned int status_change;
848
849 /* The interrupt handler does not take the lock */
850 spin_lock(&port->lock);
851
852 if (atmel_use_dma_tx(port))
853 atmel_tx_dma(port);
854 else
855 atmel_tx_chars(port);
856
857 status = atmel_port->irq_status;
858 status_change = status ^ atmel_port->irq_status_prev;
859
860 if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
861 | ATMEL_US_DCD | ATMEL_US_CTS)) {
862 /* TODO: All reads to CSR will clear these interrupts! */
863 if (status_change & ATMEL_US_RI)
864 port->icount.rng++;
865 if (status_change & ATMEL_US_DSR)
866 port->icount.dsr++;
867 if (status_change & ATMEL_US_DCD)
868 uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
869 if (status_change & ATMEL_US_CTS)
870 uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
871
872 wake_up_interruptible(&port->state->port.delta_msr_wait);
873
874 atmel_port->irq_status_prev = status;
875 }
876
877 if (atmel_use_dma_rx(port))
878 atmel_rx_from_dma(port);
879 else
880 atmel_rx_from_ring(port);
881
882 spin_unlock(&port->lock);
883 }
884
885 /*
886 * Perform initialization and enable port for reception
887 */
888 static int atmel_startup(struct uart_port *port)
889 {
890 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
891 struct tty_struct *tty = port->state->port.tty;
892 int retval;
893
894 /*
895 * Ensure that no interrupts are enabled otherwise when
896 * request_irq() is called we could get stuck trying to
897 * handle an unexpected interrupt
898 */
899 UART_PUT_IDR(port, -1);
900
901 /*
902 * Allocate the IRQ
903 */
904 retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
905 tty ? tty->name : "atmel_serial", port);
906 if (retval) {
907 printk("atmel_serial: atmel_startup - Can't get irq\n");
908 return retval;
909 }
910
911 /*
912 * Initialize DMA (if necessary)
913 */
914 if (atmel_use_dma_rx(port)) {
915 int i;
916
917 for (i = 0; i < 2; i++) {
918 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
919
920 pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
921 if (pdc->buf == NULL) {
922 if (i != 0) {
923 dma_unmap_single(port->dev,
924 atmel_port->pdc_rx[0].dma_addr,
925 PDC_BUFFER_SIZE,
926 DMA_FROM_DEVICE);
927 kfree(atmel_port->pdc_rx[0].buf);
928 }
929 free_irq(port->irq, port);
930 return -ENOMEM;
931 }
932 pdc->dma_addr = dma_map_single(port->dev,
933 pdc->buf,
934 PDC_BUFFER_SIZE,
935 DMA_FROM_DEVICE);
936 pdc->dma_size = PDC_BUFFER_SIZE;
937 pdc->ofs = 0;
938 }
939
940 atmel_port->pdc_rx_idx = 0;
941
942 UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
943 UART_PUT_RCR(port, PDC_BUFFER_SIZE);
944
945 UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
946 UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
947 }
948 if (atmel_use_dma_tx(port)) {
949 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
950 struct circ_buf *xmit = &port->state->xmit;
951
952 pdc->buf = xmit->buf;
953 pdc->dma_addr = dma_map_single(port->dev,
954 pdc->buf,
955 UART_XMIT_SIZE,
956 DMA_TO_DEVICE);
957 pdc->dma_size = UART_XMIT_SIZE;
958 pdc->ofs = 0;
959 }
960
961 /*
962 * If there is a specific "open" function (to register
963 * control line interrupts)
964 */
965 if (atmel_open_hook) {
966 retval = atmel_open_hook(port);
967 if (retval) {
968 free_irq(port->irq, port);
969 return retval;
970 }
971 }
972
973 /* Save current CSR for comparison in atmel_tasklet_func() */
974 atmel_port->irq_status_prev = UART_GET_CSR(port);
975 atmel_port->irq_status = atmel_port->irq_status_prev;
976
977 /*
978 * Finally, enable the serial port
979 */
980 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
981 /* enable xmit & rcvr */
982 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
983
984 if (atmel_use_dma_rx(port)) {
985 /* set UART timeout */
986 UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
987 UART_PUT_CR(port, ATMEL_US_STTTO);
988
989 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
990 /* enable PDC controller */
991 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
992 } else {
993 /* enable receive only */
994 UART_PUT_IER(port, ATMEL_US_RXRDY);
995 }
996
997 return 0;
998 }
999
1000 /*
1001 * Disable the port
1002 */
1003 static void atmel_shutdown(struct uart_port *port)
1004 {
1005 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1006 /*
1007 * Ensure everything is stopped.
1008 */
1009 atmel_stop_rx(port);
1010 atmel_stop_tx(port);
1011
1012 /*
1013 * Shut-down the DMA.
1014 */
1015 if (atmel_use_dma_rx(port)) {
1016 int i;
1017
1018 for (i = 0; i < 2; i++) {
1019 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
1020
1021 dma_unmap_single(port->dev,
1022 pdc->dma_addr,
1023 pdc->dma_size,
1024 DMA_FROM_DEVICE);
1025 kfree(pdc->buf);
1026 }
1027 }
1028 if (atmel_use_dma_tx(port)) {
1029 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
1030
1031 dma_unmap_single(port->dev,
1032 pdc->dma_addr,
1033 pdc->dma_size,
1034 DMA_TO_DEVICE);
1035 }
1036
1037 /*
1038 * Disable all interrupts, port and break condition.
1039 */
1040 UART_PUT_CR(port, ATMEL_US_RSTSTA);
1041 UART_PUT_IDR(port, -1);
1042
1043 /*
1044 * Free the interrupt
1045 */
1046 free_irq(port->irq, port);
1047
1048 /*
1049 * If there is a specific "close" function (to unregister
1050 * control line interrupts)
1051 */
1052 if (atmel_close_hook)
1053 atmel_close_hook(port);
1054 }
1055
1056 /*
1057 * Flush any TX data submitted for DMA. Called when the TX circular
1058 * buffer is reset.
1059 */
1060 static void atmel_flush_buffer(struct uart_port *port)
1061 {
1062 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1063
1064 if (atmel_use_dma_tx(port)) {
1065 UART_PUT_TCR(port, 0);
1066 atmel_port->pdc_tx.ofs = 0;
1067 }
1068 }
1069
1070 /*
1071 * Power / Clock management.
1072 */
1073 static void atmel_serial_pm(struct uart_port *port, unsigned int state,
1074 unsigned int oldstate)
1075 {
1076 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1077
1078 switch (state) {
1079 case 0:
1080 /*
1081 * Enable the peripheral clock for this serial port.
1082 * This is called on uart_open() or a resume event.
1083 */
1084 clk_enable(atmel_port->clk);
1085
1086 /* re-enable interrupts if we disabled some on suspend */
1087 UART_PUT_IER(port, atmel_port->backup_imr);
1088 break;
1089 case 3:
1090 /* Back up the interrupt mask and disable all interrupts */
1091 atmel_port->backup_imr = UART_GET_IMR(port);
1092 UART_PUT_IDR(port, -1);
1093
1094 /*
1095 * Disable the peripheral clock for this serial port.
1096 * This is called on uart_close() or a suspend event.
1097 */
1098 clk_disable(atmel_port->clk);
1099 break;
1100 default:
1101 printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
1102 }
1103 }
1104
1105 /*
1106 * Change the port parameters
1107 */
1108 static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
1109 struct ktermios *old)
1110 {
1111 unsigned long flags;
1112 unsigned int mode, imr, quot, baud;
1113 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1114
1115 /* Get current mode register */
1116 mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
1117 | ATMEL_US_NBSTOP | ATMEL_US_PAR
1118 | ATMEL_US_USMODE);
1119
1120 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1121 quot = uart_get_divisor(port, baud);
1122
1123 if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
1124 quot /= 8;
1125 mode |= ATMEL_US_USCLKS_MCK_DIV8;
1126 }
1127
1128 /* byte size */
1129 switch (termios->c_cflag & CSIZE) {
1130 case CS5:
1131 mode |= ATMEL_US_CHRL_5;
1132 break;
1133 case CS6:
1134 mode |= ATMEL_US_CHRL_6;
1135 break;
1136 case CS7:
1137 mode |= ATMEL_US_CHRL_7;
1138 break;
1139 default:
1140 mode |= ATMEL_US_CHRL_8;
1141 break;
1142 }
1143
1144 /* stop bits */
1145 if (termios->c_cflag & CSTOPB)
1146 mode |= ATMEL_US_NBSTOP_2;
1147
1148 /* parity */
1149 if (termios->c_cflag & PARENB) {
1150 /* Mark or Space parity */
1151 if (termios->c_cflag & CMSPAR) {
1152 if (termios->c_cflag & PARODD)
1153 mode |= ATMEL_US_PAR_MARK;
1154 else
1155 mode |= ATMEL_US_PAR_SPACE;
1156 } else if (termios->c_cflag & PARODD)
1157 mode |= ATMEL_US_PAR_ODD;
1158 else
1159 mode |= ATMEL_US_PAR_EVEN;
1160 } else
1161 mode |= ATMEL_US_PAR_NONE;
1162
1163 /* hardware handshake (RTS/CTS) */
1164 if (termios->c_cflag & CRTSCTS)
1165 mode |= ATMEL_US_USMODE_HWHS;
1166 else
1167 mode |= ATMEL_US_USMODE_NORMAL;
1168
1169 spin_lock_irqsave(&port->lock, flags);
1170
1171 port->read_status_mask = ATMEL_US_OVRE;
1172 if (termios->c_iflag & INPCK)
1173 port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
1174 if (termios->c_iflag & (BRKINT | PARMRK))
1175 port->read_status_mask |= ATMEL_US_RXBRK;
1176
1177 if (atmel_use_dma_rx(port))
1178 /* need to enable error interrupts */
1179 UART_PUT_IER(port, port->read_status_mask);
1180
1181 /*
1182 * Characters to ignore
1183 */
1184 port->ignore_status_mask = 0;
1185 if (termios->c_iflag & IGNPAR)
1186 port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
1187 if (termios->c_iflag & IGNBRK) {
1188 port->ignore_status_mask |= ATMEL_US_RXBRK;
1189 /*
1190 * If we're ignoring parity and break indicators,
1191 * ignore overruns too (for real raw support).
1192 */
1193 if (termios->c_iflag & IGNPAR)
1194 port->ignore_status_mask |= ATMEL_US_OVRE;
1195 }
1196 /* TODO: Ignore all characters if CREAD is set.*/
1197
1198 /* update the per-port timeout */
1199 uart_update_timeout(port, termios->c_cflag, baud);
1200
1201 /*
1202 * save/disable interrupts. The tty layer will ensure that the
1203 * transmitter is empty if requested by the caller, so there's
1204 * no need to wait for it here.
1205 */
1206 imr = UART_GET_IMR(port);
1207 UART_PUT_IDR(port, -1);
1208
1209 /* disable receiver and transmitter */
1210 UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
1211
1212 /* Resetting serial mode to RS232 (0x0) */
1213 mode &= ~ATMEL_US_USMODE;
1214
1215 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
1216 dev_dbg(port->dev, "Setting UART to RS485\n");
1217 if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
1218 UART_PUT_TTGR(port,
1219 atmel_port->rs485.delay_rts_after_send);
1220 mode |= ATMEL_US_USMODE_RS485;
1221 } else {
1222 dev_dbg(port->dev, "Setting UART to RS232\n");
1223 }
1224
1225 /* set the parity, stop bits and data size */
1226 UART_PUT_MR(port, mode);
1227
1228 /* set the baud rate */
1229 UART_PUT_BRGR(port, quot);
1230 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1231 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
1232
1233 /* restore interrupts */
1234 UART_PUT_IER(port, imr);
1235
1236 /* CTS flow-control and modem-status interrupts */
1237 if (UART_ENABLE_MS(port, termios->c_cflag))
1238 port->ops->enable_ms(port);
1239
1240 spin_unlock_irqrestore(&port->lock, flags);
1241 }
1242
1243 /*
1244 * Return string describing the specified port
1245 */
1246 static const char *atmel_type(struct uart_port *port)
1247 {
1248 return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL;
1249 }
1250
1251 /*
1252 * Release the memory region(s) being used by 'port'.
1253 */
1254 static void atmel_release_port(struct uart_port *port)
1255 {
1256 struct platform_device *pdev = to_platform_device(port->dev);
1257 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
1258
1259 release_mem_region(port->mapbase, size);
1260
1261 if (port->flags & UPF_IOREMAP) {
1262 iounmap(port->membase);
1263 port->membase = NULL;
1264 }
1265 }
1266
1267 /*
1268 * Request the memory region(s) being used by 'port'.
1269 */
1270 static int atmel_request_port(struct uart_port *port)
1271 {
1272 struct platform_device *pdev = to_platform_device(port->dev);
1273 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
1274
1275 if (!request_mem_region(port->mapbase, size, "atmel_serial"))
1276 return -EBUSY;
1277
1278 if (port->flags & UPF_IOREMAP) {
1279 port->membase = ioremap(port->mapbase, size);
1280 if (port->membase == NULL) {
1281 release_mem_region(port->mapbase, size);
1282 return -ENOMEM;
1283 }
1284 }
1285
1286 return 0;
1287 }
1288
1289 /*
1290 * Configure/autoconfigure the port.
1291 */
1292 static void atmel_config_port(struct uart_port *port, int flags)
1293 {
1294 if (flags & UART_CONFIG_TYPE) {
1295 port->type = PORT_ATMEL;
1296 atmel_request_port(port);
1297 }
1298 }
1299
1300 /*
1301 * Verify the new serial_struct (for TIOCSSERIAL).
1302 */
1303 static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
1304 {
1305 int ret = 0;
1306 if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL)
1307 ret = -EINVAL;
1308 if (port->irq != ser->irq)
1309 ret = -EINVAL;
1310 if (ser->io_type != SERIAL_IO_MEM)
1311 ret = -EINVAL;
1312 if (port->uartclk / 16 != ser->baud_base)
1313 ret = -EINVAL;
1314 if ((void *)port->mapbase != ser->iomem_base)
1315 ret = -EINVAL;
1316 if (port->iobase != ser->port)
1317 ret = -EINVAL;
1318 if (ser->hub6 != 0)
1319 ret = -EINVAL;
1320 return ret;
1321 }
1322
1323 #ifdef CONFIG_CONSOLE_POLL
1324 static int atmel_poll_get_char(struct uart_port *port)
1325 {
1326 while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
1327 cpu_relax();
1328
1329 return UART_GET_CHAR(port);
1330 }
1331
1332 static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
1333 {
1334 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
1335 cpu_relax();
1336
1337 UART_PUT_CHAR(port, ch);
1338 }
1339 #endif
1340
1341 static int
1342 atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
1343 {
1344 struct serial_rs485 rs485conf;
1345
1346 switch (cmd) {
1347 case TIOCSRS485:
1348 if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
1349 sizeof(rs485conf)))
1350 return -EFAULT;
1351
1352 atmel_config_rs485(port, &rs485conf);
1353 break;
1354
1355 case TIOCGRS485:
1356 if (copy_to_user((struct serial_rs485 *) arg,
1357 &(to_atmel_uart_port(port)->rs485),
1358 sizeof(rs485conf)))
1359 return -EFAULT;
1360 break;
1361
1362 default:
1363 return -ENOIOCTLCMD;
1364 }
1365 return 0;
1366 }
1367
1368
1369
1370 static struct uart_ops atmel_pops = {
1371 .tx_empty = atmel_tx_empty,
1372 .set_mctrl = atmel_set_mctrl,
1373 .get_mctrl = atmel_get_mctrl,
1374 .stop_tx = atmel_stop_tx,
1375 .start_tx = atmel_start_tx,
1376 .stop_rx = atmel_stop_rx,
1377 .enable_ms = atmel_enable_ms,
1378 .break_ctl = atmel_break_ctl,
1379 .startup = atmel_startup,
1380 .shutdown = atmel_shutdown,
1381 .flush_buffer = atmel_flush_buffer,
1382 .set_termios = atmel_set_termios,
1383 .type = atmel_type,
1384 .release_port = atmel_release_port,
1385 .request_port = atmel_request_port,
1386 .config_port = atmel_config_port,
1387 .verify_port = atmel_verify_port,
1388 .pm = atmel_serial_pm,
1389 .ioctl = atmel_ioctl,
1390 #ifdef CONFIG_CONSOLE_POLL
1391 .poll_get_char = atmel_poll_get_char,
1392 .poll_put_char = atmel_poll_put_char,
1393 #endif
1394 };
1395
1396 /*
1397 * Configure the port from the platform device resource info.
1398 */
1399 static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
1400 struct platform_device *pdev)
1401 {
1402 struct uart_port *port = &atmel_port->uart;
1403 struct atmel_uart_data *data = pdev->dev.platform_data;
1404
1405 port->iotype = UPIO_MEM;
1406 port->flags = UPF_BOOT_AUTOCONF;
1407 port->ops = &atmel_pops;
1408 port->fifosize = 1;
1409 port->line = pdev->id;
1410 port->dev = &pdev->dev;
1411 port->mapbase = pdev->resource[0].start;
1412 port->irq = pdev->resource[1].start;
1413
1414 tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
1415 (unsigned long)port);
1416
1417 memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
1418
1419 if (data->regs)
1420 /* Already mapped by setup code */
1421 port->membase = data->regs;
1422 else {
1423 port->flags |= UPF_IOREMAP;
1424 port->membase = NULL;
1425 }
1426
1427 /* for console, the clock could already be configured */
1428 if (!atmel_port->clk) {
1429 atmel_port->clk = clk_get(&pdev->dev, "usart");
1430 clk_enable(atmel_port->clk);
1431 port->uartclk = clk_get_rate(atmel_port->clk);
1432 clk_disable(atmel_port->clk);
1433 /* only enable clock when USART is in use */
1434 }
1435
1436 atmel_port->use_dma_rx = data->use_dma_rx;
1437 atmel_port->use_dma_tx = data->use_dma_tx;
1438 atmel_port->rs485 = data->rs485;
1439 /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
1440 if (atmel_port->rs485.flags & SER_RS485_ENABLED)
1441 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
1442 else if (atmel_use_dma_tx(port)) {
1443 port->fifosize = PDC_BUFFER_SIZE;
1444 atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
1445 } else {
1446 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
1447 }
1448 }
1449
1450 /*
1451 * Register board-specific modem-control line handlers.
1452 */
1453 void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
1454 {
1455 if (fns->enable_ms)
1456 atmel_pops.enable_ms = fns->enable_ms;
1457 if (fns->get_mctrl)
1458 atmel_pops.get_mctrl = fns->get_mctrl;
1459 if (fns->set_mctrl)
1460 atmel_pops.set_mctrl = fns->set_mctrl;
1461 atmel_open_hook = fns->open;
1462 atmel_close_hook = fns->close;
1463 atmel_pops.pm = fns->pm;
1464 atmel_pops.set_wake = fns->set_wake;
1465 }
1466
1467 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
1468 static void atmel_console_putchar(struct uart_port *port, int ch)
1469 {
1470 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
1471 cpu_relax();
1472 UART_PUT_CHAR(port, ch);
1473 }
1474
1475 /*
1476 * Interrupts are disabled on entering
1477 */
1478 static void atmel_console_write(struct console *co, const char *s, u_int count)
1479 {
1480 struct uart_port *port = &atmel_ports[co->index].uart;
1481 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1482 unsigned int status, imr;
1483 unsigned int pdc_tx;
1484
1485 /*
1486 * First, save IMR and then disable interrupts
1487 */
1488 imr = UART_GET_IMR(port);
1489 UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
1490
1491 /* Store PDC transmit status and disable it */
1492 pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
1493 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
1494
1495 uart_console_write(port, s, count, atmel_console_putchar);
1496
1497 /*
1498 * Finally, wait for transmitter to become empty
1499 * and restore IMR
1500 */
1501 do {
1502 status = UART_GET_CSR(port);
1503 } while (!(status & ATMEL_US_TXRDY));
1504
1505 /* Restore PDC transmit status */
1506 if (pdc_tx)
1507 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
1508
1509 /* set interrupts back the way they were */
1510 UART_PUT_IER(port, imr);
1511 }
1512
1513 /*
1514 * If the port was already initialised (eg, by a boot loader),
1515 * try to determine the current setup.
1516 */
1517 static void __init atmel_console_get_options(struct uart_port *port, int *baud,
1518 int *parity, int *bits)
1519 {
1520 unsigned int mr, quot;
1521
1522 /*
1523 * If the baud rate generator isn't running, the port wasn't
1524 * initialized by the boot loader.
1525 */
1526 quot = UART_GET_BRGR(port) & ATMEL_US_CD;
1527 if (!quot)
1528 return;
1529
1530 mr = UART_GET_MR(port) & ATMEL_US_CHRL;
1531 if (mr == ATMEL_US_CHRL_8)
1532 *bits = 8;
1533 else
1534 *bits = 7;
1535
1536 mr = UART_GET_MR(port) & ATMEL_US_PAR;
1537 if (mr == ATMEL_US_PAR_EVEN)
1538 *parity = 'e';
1539 else if (mr == ATMEL_US_PAR_ODD)
1540 *parity = 'o';
1541
1542 /*
1543 * The serial core only rounds down when matching this to a
1544 * supported baud rate. Make sure we don't end up slightly
1545 * lower than one of those, as it would make us fall through
1546 * to a much lower baud rate than we really want.
1547 */
1548 *baud = port->uartclk / (16 * (quot - 1));
1549 }
1550
1551 static int __init atmel_console_setup(struct console *co, char *options)
1552 {
1553 struct uart_port *port = &atmel_ports[co->index].uart;
1554 int baud = 115200;
1555 int bits = 8;
1556 int parity = 'n';
1557 int flow = 'n';
1558
1559 if (port->membase == NULL) {
1560 /* Port not initialized yet - delay setup */
1561 return -ENODEV;
1562 }
1563
1564 clk_enable(atmel_ports[co->index].clk);
1565
1566 UART_PUT_IDR(port, -1);
1567 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1568 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
1569
1570 if (options)
1571 uart_parse_options(options, &baud, &parity, &bits, &flow);
1572 else
1573 atmel_console_get_options(port, &baud, &parity, &bits);
1574
1575 return uart_set_options(port, co, baud, parity, bits, flow);
1576 }
1577
1578 static struct uart_driver atmel_uart;
1579
1580 static struct console atmel_console = {
1581 .name = ATMEL_DEVICENAME,
1582 .write = atmel_console_write,
1583 .device = uart_console_device,
1584 .setup = atmel_console_setup,
1585 .flags = CON_PRINTBUFFER,
1586 .index = -1,
1587 .data = &atmel_uart,
1588 };
1589
1590 #define ATMEL_CONSOLE_DEVICE (&atmel_console)
1591
1592 /*
1593 * Early console initialization (before VM subsystem initialized).
1594 */
1595 static int __init atmel_console_init(void)
1596 {
1597 if (atmel_default_console_device) {
1598 add_preferred_console(ATMEL_DEVICENAME,
1599 atmel_default_console_device->id, NULL);
1600 atmel_init_port(&atmel_ports[atmel_default_console_device->id],
1601 atmel_default_console_device);
1602 register_console(&atmel_console);
1603 }
1604
1605 return 0;
1606 }
1607
1608 console_initcall(atmel_console_init);
1609
1610 /*
1611 * Late console initialization.
1612 */
1613 static int __init atmel_late_console_init(void)
1614 {
1615 if (atmel_default_console_device
1616 && !(atmel_console.flags & CON_ENABLED))
1617 register_console(&atmel_console);
1618
1619 return 0;
1620 }
1621
1622 core_initcall(atmel_late_console_init);
1623
1624 static inline bool atmel_is_console_port(struct uart_port *port)
1625 {
1626 return port->cons && port->cons->index == port->line;
1627 }
1628
1629 #else
1630 #define ATMEL_CONSOLE_DEVICE NULL
1631
1632 static inline bool atmel_is_console_port(struct uart_port *port)
1633 {
1634 return false;
1635 }
1636 #endif
1637
1638 static struct uart_driver atmel_uart = {
1639 .owner = THIS_MODULE,
1640 .driver_name = "atmel_serial",
1641 .dev_name = ATMEL_DEVICENAME,
1642 .major = SERIAL_ATMEL_MAJOR,
1643 .minor = MINOR_START,
1644 .nr = ATMEL_MAX_UART,
1645 .cons = ATMEL_CONSOLE_DEVICE,
1646 };
1647
1648 #ifdef CONFIG_PM
1649 static bool atmel_serial_clk_will_stop(void)
1650 {
1651 #ifdef CONFIG_ARCH_AT91
1652 return at91_suspend_entering_slow_clock();
1653 #else
1654 return false;
1655 #endif
1656 }
1657
1658 static int atmel_serial_suspend(struct platform_device *pdev,
1659 pm_message_t state)
1660 {
1661 struct uart_port *port = platform_get_drvdata(pdev);
1662 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1663
1664 if (atmel_is_console_port(port) && console_suspend_enabled) {
1665 /* Drain the TX shifter */
1666 while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
1667 cpu_relax();
1668 }
1669
1670 /* we can not wake up if we're running on slow clock */
1671 atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
1672 if (atmel_serial_clk_will_stop())
1673 device_set_wakeup_enable(&pdev->dev, 0);
1674
1675 uart_suspend_port(&atmel_uart, port);
1676
1677 return 0;
1678 }
1679
1680 static int atmel_serial_resume(struct platform_device *pdev)
1681 {
1682 struct uart_port *port = platform_get_drvdata(pdev);
1683 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1684
1685 uart_resume_port(&atmel_uart, port);
1686 device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
1687
1688 return 0;
1689 }
1690 #else
1691 #define atmel_serial_suspend NULL
1692 #define atmel_serial_resume NULL
1693 #endif
1694
1695 static int __devinit atmel_serial_probe(struct platform_device *pdev)
1696 {
1697 struct atmel_uart_port *port;
1698 void *data;
1699 int ret;
1700
1701 BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
1702
1703 port = &atmel_ports[pdev->id];
1704 port->backup_imr = 0;
1705
1706 atmel_init_port(port, pdev);
1707
1708 if (!atmel_use_dma_rx(&port->uart)) {
1709 ret = -ENOMEM;
1710 data = kmalloc(sizeof(struct atmel_uart_char)
1711 * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
1712 if (!data)
1713 goto err_alloc_ring;
1714 port->rx_ring.buf = data;
1715 }
1716
1717 ret = uart_add_one_port(&atmel_uart, &port->uart);
1718 if (ret)
1719 goto err_add_port;
1720
1721 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
1722 if (atmel_is_console_port(&port->uart)
1723 && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
1724 /*
1725 * The serial core enabled the clock for us, so undo
1726 * the clk_enable() in atmel_console_setup()
1727 */
1728 clk_disable(port->clk);
1729 }
1730 #endif
1731
1732 device_init_wakeup(&pdev->dev, 1);
1733 platform_set_drvdata(pdev, port);
1734
1735 if (port->rs485.flags & SER_RS485_ENABLED) {
1736 UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
1737 UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
1738 }
1739
1740 return 0;
1741
1742 err_add_port:
1743 kfree(port->rx_ring.buf);
1744 port->rx_ring.buf = NULL;
1745 err_alloc_ring:
1746 if (!atmel_is_console_port(&port->uart)) {
1747 clk_put(port->clk);
1748 port->clk = NULL;
1749 }
1750
1751 return ret;
1752 }
1753
1754 static int __devexit atmel_serial_remove(struct platform_device *pdev)
1755 {
1756 struct uart_port *port = platform_get_drvdata(pdev);
1757 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1758 int ret = 0;
1759
1760 device_init_wakeup(&pdev->dev, 0);
1761 platform_set_drvdata(pdev, NULL);
1762
1763 ret = uart_remove_one_port(&atmel_uart, port);
1764
1765 tasklet_kill(&atmel_port->tasklet);
1766 kfree(atmel_port->rx_ring.buf);
1767
1768 /* "port" is allocated statically, so we shouldn't free it */
1769
1770 clk_put(atmel_port->clk);
1771
1772 return ret;
1773 }
1774
1775 static struct platform_driver atmel_serial_driver = {
1776 .probe = atmel_serial_probe,
1777 .remove = __devexit_p(atmel_serial_remove),
1778 .suspend = atmel_serial_suspend,
1779 .resume = atmel_serial_resume,
1780 .driver = {
1781 .name = "atmel_usart",
1782 .owner = THIS_MODULE,
1783 },
1784 };
1785
1786 static int __init atmel_serial_init(void)
1787 {
1788 int ret;
1789
1790 ret = uart_register_driver(&atmel_uart);
1791 if (ret)
1792 return ret;
1793
1794 ret = platform_driver_register(&atmel_serial_driver);
1795 if (ret)
1796 uart_unregister_driver(&atmel_uart);
1797
1798 return ret;
1799 }
1800
1801 static void __exit atmel_serial_exit(void)
1802 {
1803 platform_driver_unregister(&atmel_serial_driver);
1804 uart_unregister_driver(&atmel_uart);
1805 }
1806
1807 module_init(atmel_serial_init);
1808 module_exit(atmel_serial_exit);
1809
1810 MODULE_AUTHOR("Rick Bronson");
1811 MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
1812 MODULE_LICENSE("GPL");
1813 MODULE_ALIAS("platform:atmel_usart");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree