2 # USB Storage driver configuration
5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6 comment "also be needed; see USB_STORAGE Help for more info"
10 tristate "USB Mass Storage support"
11 depends on USB && SCSI
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
27 config USB_STORAGE_DEBUG
28 bool "USB Mass Storage verbose debug"
29 depends on USB_STORAGE
31 Say Y here in order to have the USB Mass Storage code generate
32 verbose debugging messages.
34 config USB_STORAGE_DATAFAB
35 tristate "Datafab Compact Flash Reader support"
36 depends on USB_STORAGE
38 Support for certain Datafab CompactFlash readers.
39 Datafab has a web page at <http://www.datafabusa.com/>.
41 If this driver is compiled as a module, it will be named ums-datafab.
43 config USB_STORAGE_FREECOM
44 tristate "Freecom USB/ATAPI Bridge support"
45 depends on USB_STORAGE
47 Support for the Freecom USB to IDE/ATAPI adaptor.
48 Freecom has a web page at <http://www.freecom.de/>.
50 If this driver is compiled as a module, it will be named ums-freecom.
52 config USB_STORAGE_ISD200
53 tristate "ISD-200 USB/ATA Bridge support"
54 depends on USB_STORAGE
56 Say Y here if you want to use USB Mass Store devices based
57 on the In-Systems Design ISD-200 USB/ATA bridge.
59 Some of the products that use this chip are:
62 - ISD SmartCable for Storage
63 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
64 - Sony CRX10U CD-R/RW drive
65 - CyQ've CQ8060A CDRW drive
66 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
68 If this driver is compiled as a module, it will be named ums-isd200.
70 config USB_STORAGE_USBAT
71 tristate "USBAT/USBAT02-based storage support"
72 depends on USB_STORAGE
74 Say Y here to include additional code to support storage devices
75 based on the SCM/Shuttle USBAT/USBAT02 processors.
77 Devices reported to work with this driver include:
78 - CompactFlash reader included with Kodak DC3800 camera
79 - Dane-Elec Zmate CompactFlash reader
80 - Delkin Efilm reader2
81 - HP 8200e/8210e/8230e CD-Writer Plus drives
83 - Jessops CompactFlash JESDCFRU BLACK
84 - Kingston Technology PCREAD-USB/CF
85 - Maxell UA4 CompactFlash reader
87 - Microtech ZiO! ICS-45 CF2
88 - RCA LYRA MP3 portable
89 - Sandisk ImageMate SDDR-05b
91 If this driver is compiled as a module, it will be named ums-usbat.
93 config USB_STORAGE_SDDR09
94 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
95 depends on USB_STORAGE
97 Say Y here to include additional code to support the Sandisk SDDR-09
98 SmartMedia reader in the USB Mass Storage driver.
99 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
101 If this driver is compiled as a module, it will be named ums-sddr09.
103 config USB_STORAGE_SDDR55
104 tristate "SanDisk SDDR-55 SmartMedia support"
105 depends on USB_STORAGE
107 Say Y here to include additional code to support the Sandisk SDDR-55
108 SmartMedia reader in the USB Mass Storage driver.
110 If this driver is compiled as a module, it will be named ums-sddr55.
112 config USB_STORAGE_JUMPSHOT
113 tristate "Lexar Jumpshot Compact Flash Reader"
114 depends on USB_STORAGE
116 Say Y here to include additional code to support the Lexar Jumpshot
117 USB CompactFlash reader.
119 If this driver is compiled as a module, it will be named ums-jumpshot.
121 config USB_STORAGE_ALAUDA
122 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
123 depends on USB_STORAGE
125 Say Y here to include additional code to support the Olympus MAUSB-10
126 and Fujifilm DPC-R1 USB Card reader/writer devices.
128 These devices are based on the Alauda chip and support both
129 XD and SmartMedia cards.
131 If this driver is compiled as a module, it will be named ums-alauda.
133 config USB_STORAGE_ONETOUCH
134 tristate "Support OneTouch Button on Maxtor Hard Drives"
135 depends on USB_STORAGE
136 depends on INPUT=y || INPUT=USB_STORAGE
138 Say Y here to include additional code to support the Maxtor OneTouch
139 USB hard drive's onetouch button.
141 This code registers the button on the front of Maxtor OneTouch USB
142 hard drive's as an input device. An action can be associated with
143 this input in any keybinding software. (e.g. gnome's keyboard short-
146 If this driver is compiled as a module, it will be named ums-onetouch.
148 config USB_STORAGE_KARMA
149 tristate "Support for Rio Karma music player"
150 depends on USB_STORAGE
152 Say Y here to include additional code to support the Rio Karma
155 This code places the Rio Karma into mass storage mode, enabling
156 it to be mounted as an ordinary filesystem. Performing an eject
157 on the resulting scsi device node returns the Karma to normal
160 If this driver is compiled as a module, it will be named ums-karma.
162 config USB_STORAGE_CYPRESS_ATACB
163 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
164 depends on USB_STORAGE
166 Say Y here if you want to use SAT (ata pass through) on devices based
167 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
168 to use tools to tune and monitor your drive (like hdparm or smartctl).
170 If you say no here your device will still work with the standard usb
173 If this driver is compiled as a module, it will be named ums-cypress.
176 bool "The shared table of common (or usual) storage devices"
179 This module contains a table of common (or usual) devices
180 for usb-storage and ub drivers, and allows to switch binding
181 of these devices without rebuilding modules.
183 Typical syntax of /etc/modprobe.conf is:
185 options libusual bias="ub"