iwlwifi: fix skb usage after free
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ata / sata_inic162x.c
blob4406902b4293f4ee838fd0388b89fb64b6cfc085
1 /*
2 * sata_inic162x.c - Driver for Initio 162x SATA controllers
4 * Copyright 2006 SUSE Linux Products GmbH
5 * Copyright 2006 Tejun Heo <teheo@novell.com>
7 * This file is released under GPL v2.
9 * This controller is eccentric and easily locks up if something isn't
10 * right. Documentation is available at initio's website but it only
11 * documents registers (not programming model).
13 * This driver has interesting history. The first version was written
14 * from the documentation and a 2.4 IDE driver posted on a Taiwan
15 * company, which didn't use any IDMA features and couldn't handle
16 * LBA48. The resulting driver couldn't handle LBA48 devices either
17 * making it pretty useless.
19 * After a while, initio picked the driver up, renamed it to
20 * sata_initio162x, updated it to use IDMA for ATA DMA commands and
21 * posted it on their website. It only used ATA_PROT_DMA for IDMA and
22 * attaching both devices and issuing IDMA and !IDMA commands
23 * simultaneously broke it due to PIRQ masking interaction but it did
24 * show how to use the IDMA (ADMA + some initio specific twists)
25 * engine.
27 * Then, I picked up their changes again and here's the usable driver
28 * which uses IDMA for everything. Everything works now including
29 * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some
30 * issues tho. Result Tf is not resported properly, NCQ isn't
31 * supported yet and CD/DVD writing works with DMA assisted PIO
32 * protocol (which, for native SATA devices, shouldn't cause any
33 * noticeable difference).
35 * Anyways, so, here's finally a working driver for inic162x. Enjoy!
37 * initio: If you guys wanna improve the driver regarding result TF
38 * access and other stuff, please feel free to contact me. I'll be
39 * happy to assist.
42 #include <linux/kernel.h>
43 #include <linux/module.h>
44 #include <linux/pci.h>
45 #include <scsi/scsi_host.h>
46 #include <linux/libata.h>
47 #include <linux/blkdev.h>
48 #include <scsi/scsi_device.h>
50 #define DRV_NAME "sata_inic162x"
51 #define DRV_VERSION "0.4"
53 enum {
54 MMIO_BAR_PCI = 5,
55 MMIO_BAR_CARDBUS = 1,
57 NR_PORTS = 2,
59 IDMA_CPB_TBL_SIZE = 4 * 32,
61 INIC_DMA_BOUNDARY = 0xffffff,
63 HOST_ACTRL = 0x08,
64 HOST_CTL = 0x7c,
65 HOST_STAT = 0x7e,
66 HOST_IRQ_STAT = 0xbc,
67 HOST_IRQ_MASK = 0xbe,
69 PORT_SIZE = 0x40,
71 /* registers for ATA TF operation */
72 PORT_TF_DATA = 0x00,
73 PORT_TF_FEATURE = 0x01,
74 PORT_TF_NSECT = 0x02,
75 PORT_TF_LBAL = 0x03,
76 PORT_TF_LBAM = 0x04,
77 PORT_TF_LBAH = 0x05,
78 PORT_TF_DEVICE = 0x06,
79 PORT_TF_COMMAND = 0x07,
80 PORT_TF_ALT_STAT = 0x08,
81 PORT_IRQ_STAT = 0x09,
82 PORT_IRQ_MASK = 0x0a,
83 PORT_PRD_CTL = 0x0b,
84 PORT_PRD_ADDR = 0x0c,
85 PORT_PRD_XFERLEN = 0x10,
86 PORT_CPB_CPBLAR = 0x18,
87 PORT_CPB_PTQFIFO = 0x1c,
89 /* IDMA register */
90 PORT_IDMA_CTL = 0x14,
91 PORT_IDMA_STAT = 0x16,
93 PORT_RPQ_FIFO = 0x1e,
94 PORT_RPQ_CNT = 0x1f,
96 PORT_SCR = 0x20,
98 /* HOST_CTL bits */
99 HCTL_LEDEN = (1 << 3), /* enable LED operation */
100 HCTL_IRQOFF = (1 << 8), /* global IRQ off */
101 HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
102 HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
103 HCTL_PWRDWN = (1 << 12), /* power down PHYs */
104 HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
105 HCTL_RPGSEL = (1 << 15), /* register page select */
107 HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
108 HCTL_RPGSEL,
110 /* HOST_IRQ_(STAT|MASK) bits */
111 HIRQ_PORT0 = (1 << 0),
112 HIRQ_PORT1 = (1 << 1),
113 HIRQ_SOFT = (1 << 14),
114 HIRQ_GLOBAL = (1 << 15), /* STAT only */
116 /* PORT_IRQ_(STAT|MASK) bits */
117 PIRQ_OFFLINE = (1 << 0), /* device unplugged */
118 PIRQ_ONLINE = (1 << 1), /* device plugged */
119 PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
120 PIRQ_FATAL = (1 << 3), /* fatal error */
121 PIRQ_ATA = (1 << 4), /* ATA interrupt */
122 PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
123 PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
125 PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
126 PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA,
127 PIRQ_MASK_FREEZE = 0xff,
129 /* PORT_PRD_CTL bits */
130 PRD_CTL_START = (1 << 0),
131 PRD_CTL_WR = (1 << 3),
132 PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
134 /* PORT_IDMA_CTL bits */
135 IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
136 IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
137 IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
138 IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
140 /* PORT_IDMA_STAT bits */
141 IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */
142 IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */
143 IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */
144 IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */
145 IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */
146 IDMA_STAT_PSD = (1 << 6), /* ADMA pause */
147 IDMA_STAT_DONE = (1 << 7), /* ADMA done */
149 IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR,
151 /* CPB Control Flags*/
152 CPB_CTL_VALID = (1 << 0), /* CPB valid */
153 CPB_CTL_QUEUED = (1 << 1), /* queued command */
154 CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */
155 CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */
156 CPB_CTL_DEVDIR = (1 << 4), /* device direction control */
158 /* CPB Response Flags */
159 CPB_RESP_DONE = (1 << 0), /* ATA command complete */
160 CPB_RESP_REL = (1 << 1), /* ATA release */
161 CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */
162 CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */
163 CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */
164 CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */
165 CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */
166 CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */
168 /* PRD Control Flags */
169 PRD_DRAIN = (1 << 1), /* ignore data excess */
170 PRD_CDB = (1 << 2), /* atapi packet command pointer */
171 PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */
172 PRD_DMA = (1 << 4), /* data transfer method */
173 PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */
174 PRD_IOM = (1 << 6), /* io/memory transfer */
175 PRD_END = (1 << 7), /* APRD chain end */
178 /* Comman Parameter Block */
179 struct inic_cpb {
180 u8 resp_flags; /* Response Flags */
181 u8 error; /* ATA Error */
182 u8 status; /* ATA Status */
183 u8 ctl_flags; /* Control Flags */
184 __le32 len; /* Total Transfer Length */
185 __le32 prd; /* First PRD pointer */
186 u8 rsvd[4];
187 /* 16 bytes */
188 u8 feature; /* ATA Feature */
189 u8 hob_feature; /* ATA Ex. Feature */
190 u8 device; /* ATA Device/Head */
191 u8 mirctl; /* Mirror Control */
192 u8 nsect; /* ATA Sector Count */
193 u8 hob_nsect; /* ATA Ex. Sector Count */
194 u8 lbal; /* ATA Sector Number */
195 u8 hob_lbal; /* ATA Ex. Sector Number */
196 u8 lbam; /* ATA Cylinder Low */
197 u8 hob_lbam; /* ATA Ex. Cylinder Low */
198 u8 lbah; /* ATA Cylinder High */
199 u8 hob_lbah; /* ATA Ex. Cylinder High */
200 u8 command; /* ATA Command */
201 u8 ctl; /* ATA Control */
202 u8 slave_error; /* Slave ATA Error */
203 u8 slave_status; /* Slave ATA Status */
204 /* 32 bytes */
205 } __packed;
207 /* Physical Region Descriptor */
208 struct inic_prd {
209 __le32 mad; /* Physical Memory Address */
210 __le16 len; /* Transfer Length */
211 u8 rsvd;
212 u8 flags; /* Control Flags */
213 } __packed;
215 struct inic_pkt {
216 struct inic_cpb cpb;
217 struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */
218 u8 cdb[ATAPI_CDB_LEN];
219 } __packed;
221 struct inic_host_priv {
222 void __iomem *mmio_base;
223 u16 cached_hctl;
226 struct inic_port_priv {
227 struct inic_pkt *pkt;
228 dma_addr_t pkt_dma;
229 u32 *cpb_tbl;
230 dma_addr_t cpb_tbl_dma;
233 static struct scsi_host_template inic_sht = {
234 ATA_BASE_SHT(DRV_NAME),
235 .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */
236 .dma_boundary = INIC_DMA_BOUNDARY,
239 static const int scr_map[] = {
240 [SCR_STATUS] = 0,
241 [SCR_ERROR] = 1,
242 [SCR_CONTROL] = 2,
245 static void __iomem *inic_port_base(struct ata_port *ap)
247 struct inic_host_priv *hpriv = ap->host->private_data;
249 return hpriv->mmio_base + ap->port_no * PORT_SIZE;
252 static void inic_reset_port(void __iomem *port_base)
254 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
256 /* stop IDMA engine */
257 readw(idma_ctl); /* flush */
258 msleep(1);
260 /* mask IRQ and assert reset */
261 writew(IDMA_CTL_RST_IDMA, idma_ctl);
262 readw(idma_ctl); /* flush */
263 msleep(1);
265 /* release reset */
266 writew(0, idma_ctl);
268 /* clear irq */
269 writeb(0xff, port_base + PORT_IRQ_STAT);
272 static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
274 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR;
275 void __iomem *addr;
277 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
278 return -EINVAL;
280 addr = scr_addr + scr_map[sc_reg] * 4;
281 *val = readl(scr_addr + scr_map[sc_reg] * 4);
283 /* this controller has stuck DIAG.N, ignore it */
284 if (sc_reg == SCR_ERROR)
285 *val &= ~SERR_PHYRDY_CHG;
286 return 0;
289 static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
291 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR;
293 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
294 return -EINVAL;
296 writel(val, scr_addr + scr_map[sc_reg] * 4);
297 return 0;
300 static void inic_stop_idma(struct ata_port *ap)
302 void __iomem *port_base = inic_port_base(ap);
304 readb(port_base + PORT_RPQ_FIFO);
305 readb(port_base + PORT_RPQ_CNT);
306 writew(0, port_base + PORT_IDMA_CTL);
309 static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat)
311 struct ata_eh_info *ehi = &ap->link.eh_info;
312 struct inic_port_priv *pp = ap->private_data;
313 struct inic_cpb *cpb = &pp->pkt->cpb;
314 bool freeze = false;
316 ata_ehi_clear_desc(ehi);
317 ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x",
318 irq_stat, idma_stat);
320 inic_stop_idma(ap);
322 if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
323 ata_ehi_push_desc(ehi, "hotplug");
324 ata_ehi_hotplugged(ehi);
325 freeze = true;
328 if (idma_stat & IDMA_STAT_PERR) {
329 ata_ehi_push_desc(ehi, "PCI error");
330 freeze = true;
333 if (idma_stat & IDMA_STAT_CPBERR) {
334 ata_ehi_push_desc(ehi, "CPB error");
336 if (cpb->resp_flags & CPB_RESP_IGNORED) {
337 __ata_ehi_push_desc(ehi, " ignored");
338 ehi->err_mask |= AC_ERR_INVALID;
339 freeze = true;
342 if (cpb->resp_flags & CPB_RESP_ATA_ERR)
343 ehi->err_mask |= AC_ERR_DEV;
345 if (cpb->resp_flags & CPB_RESP_SPURIOUS) {
346 __ata_ehi_push_desc(ehi, " spurious-intr");
347 ehi->err_mask |= AC_ERR_HSM;
348 freeze = true;
351 if (cpb->resp_flags &
352 (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) {
353 __ata_ehi_push_desc(ehi, " data-over/underflow");
354 ehi->err_mask |= AC_ERR_HSM;
355 freeze = true;
359 if (freeze)
360 ata_port_freeze(ap);
361 else
362 ata_port_abort(ap);
365 static void inic_host_intr(struct ata_port *ap)
367 void __iomem *port_base = inic_port_base(ap);
368 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
369 u8 irq_stat;
370 u16 idma_stat;
372 /* read and clear IRQ status */
373 irq_stat = readb(port_base + PORT_IRQ_STAT);
374 writeb(irq_stat, port_base + PORT_IRQ_STAT);
375 idma_stat = readw(port_base + PORT_IDMA_STAT);
377 if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR)))
378 inic_host_err_intr(ap, irq_stat, idma_stat);
380 if (unlikely(!qc))
381 goto spurious;
383 if (likely(idma_stat & IDMA_STAT_DONE)) {
384 inic_stop_idma(ap);
386 /* Depending on circumstances, device error
387 * isn't reported by IDMA, check it explicitly.
389 if (unlikely(readb(port_base + PORT_TF_COMMAND) &
390 (ATA_DF | ATA_ERR)))
391 qc->err_mask |= AC_ERR_DEV;
393 ata_qc_complete(qc);
394 return;
397 spurious:
398 ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: "
399 "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
400 qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
403 static irqreturn_t inic_interrupt(int irq, void *dev_instance)
405 struct ata_host *host = dev_instance;
406 struct inic_host_priv *hpriv = host->private_data;
407 u16 host_irq_stat;
408 int i, handled = 0;
410 host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
412 if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
413 goto out;
415 spin_lock(&host->lock);
417 for (i = 0; i < NR_PORTS; i++) {
418 struct ata_port *ap = host->ports[i];
420 if (!(host_irq_stat & (HIRQ_PORT0 << i)))
421 continue;
423 if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
424 inic_host_intr(ap);
425 handled++;
426 } else {
427 if (ata_ratelimit())
428 dev_printk(KERN_ERR, host->dev, "interrupt "
429 "from disabled port %d (0x%x)\n",
430 i, host_irq_stat);
434 spin_unlock(&host->lock);
436 out:
437 return IRQ_RETVAL(handled);
440 static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
442 /* For some reason ATAPI_PROT_DMA doesn't work for some
443 * commands including writes and other misc ops. Use PIO
444 * protocol instead, which BTW is driven by the DMA engine
445 * anyway, so it shouldn't make much difference for native
446 * SATA devices.
448 if (atapi_cmd_type(qc->cdb[0]) == READ)
449 return 0;
450 return 1;
453 static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
455 struct scatterlist *sg;
456 unsigned int si;
457 u8 flags = 0;
459 if (qc->tf.flags & ATA_TFLAG_WRITE)
460 flags |= PRD_WRITE;
462 if (ata_is_dma(qc->tf.protocol))
463 flags |= PRD_DMA;
465 for_each_sg(qc->sg, sg, qc->n_elem, si) {
466 prd->mad = cpu_to_le32(sg_dma_address(sg));
467 prd->len = cpu_to_le16(sg_dma_len(sg));
468 prd->flags = flags;
469 prd++;
472 WARN_ON(!si);
473 prd[-1].flags |= PRD_END;
476 static void inic_qc_prep(struct ata_queued_cmd *qc)
478 struct inic_port_priv *pp = qc->ap->private_data;
479 struct inic_pkt *pkt = pp->pkt;
480 struct inic_cpb *cpb = &pkt->cpb;
481 struct inic_prd *prd = pkt->prd;
482 bool is_atapi = ata_is_atapi(qc->tf.protocol);
483 bool is_data = ata_is_data(qc->tf.protocol);
484 unsigned int cdb_len = 0;
486 VPRINTK("ENTER\n");
488 if (is_atapi)
489 cdb_len = qc->dev->cdb_len;
491 /* prepare packet, based on initio driver */
492 memset(pkt, 0, sizeof(struct inic_pkt));
494 cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
495 if (is_atapi || is_data)
496 cpb->ctl_flags |= CPB_CTL_DATA;
498 cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
499 cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
501 cpb->device = qc->tf.device;
502 cpb->feature = qc->tf.feature;
503 cpb->nsect = qc->tf.nsect;
504 cpb->lbal = qc->tf.lbal;
505 cpb->lbam = qc->tf.lbam;
506 cpb->lbah = qc->tf.lbah;
508 if (qc->tf.flags & ATA_TFLAG_LBA48) {
509 cpb->hob_feature = qc->tf.hob_feature;
510 cpb->hob_nsect = qc->tf.hob_nsect;
511 cpb->hob_lbal = qc->tf.hob_lbal;
512 cpb->hob_lbam = qc->tf.hob_lbam;
513 cpb->hob_lbah = qc->tf.hob_lbah;
516 cpb->command = qc->tf.command;
517 /* don't load ctl - dunno why. it's like that in the initio driver */
519 /* setup PRD for CDB */
520 if (is_atapi) {
521 memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
522 prd->mad = cpu_to_le32(pp->pkt_dma +
523 offsetof(struct inic_pkt, cdb));
524 prd->len = cpu_to_le16(cdb_len);
525 prd->flags = PRD_CDB | PRD_WRITE;
526 if (!is_data)
527 prd->flags |= PRD_END;
528 prd++;
531 /* setup sg table */
532 if (is_data)
533 inic_fill_sg(prd, qc);
535 pp->cpb_tbl[0] = pp->pkt_dma;
538 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
540 struct ata_port *ap = qc->ap;
541 void __iomem *port_base = inic_port_base(ap);
543 /* fire up the ADMA engine */
544 writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
545 writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
546 writeb(0, port_base + PORT_CPB_PTQFIFO);
548 return 0;
551 static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
553 void __iomem *port_base = inic_port_base(ap);
555 tf->feature = readb(port_base + PORT_TF_FEATURE);
556 tf->nsect = readb(port_base + PORT_TF_NSECT);
557 tf->lbal = readb(port_base + PORT_TF_LBAL);
558 tf->lbam = readb(port_base + PORT_TF_LBAM);
559 tf->lbah = readb(port_base + PORT_TF_LBAH);
560 tf->device = readb(port_base + PORT_TF_DEVICE);
561 tf->command = readb(port_base + PORT_TF_COMMAND);
564 static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
566 struct ata_taskfile *rtf = &qc->result_tf;
567 struct ata_taskfile tf;
569 /* FIXME: Except for status and error, result TF access
570 * doesn't work. I tried reading from BAR0/2, CPB and BAR5.
571 * None works regardless of which command interface is used.
572 * For now return true iff status indicates device error.
573 * This means that we're reporting bogus sector for RW
574 * failures. Eeekk....
576 inic_tf_read(qc->ap, &tf);
578 if (!(tf.command & ATA_ERR))
579 return false;
581 rtf->command = tf.command;
582 rtf->feature = tf.feature;
583 return true;
586 static void inic_freeze(struct ata_port *ap)
588 void __iomem *port_base = inic_port_base(ap);
590 writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK);
591 writeb(0xff, port_base + PORT_IRQ_STAT);
594 static void inic_thaw(struct ata_port *ap)
596 void __iomem *port_base = inic_port_base(ap);
598 writeb(0xff, port_base + PORT_IRQ_STAT);
599 writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK);
602 static int inic_check_ready(struct ata_link *link)
604 void __iomem *port_base = inic_port_base(link->ap);
606 return ata_check_ready(readb(port_base + PORT_TF_COMMAND));
610 * SRST and SControl hardreset don't give valid signature on this
611 * controller. Only controller specific hardreset mechanism works.
613 static int inic_hardreset(struct ata_link *link, unsigned int *class,
614 unsigned long deadline)
616 struct ata_port *ap = link->ap;
617 void __iomem *port_base = inic_port_base(ap);
618 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
619 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
620 int rc;
622 /* hammer it into sane state */
623 inic_reset_port(port_base);
625 writew(IDMA_CTL_RST_ATA, idma_ctl);
626 readw(idma_ctl); /* flush */
627 msleep(1);
628 writew(0, idma_ctl);
630 rc = sata_link_resume(link, timing, deadline);
631 if (rc) {
632 ata_link_printk(link, KERN_WARNING, "failed to resume "
633 "link after reset (errno=%d)\n", rc);
634 return rc;
637 *class = ATA_DEV_NONE;
638 if (ata_link_online(link)) {
639 struct ata_taskfile tf;
641 /* wait for link to become ready */
642 rc = ata_wait_after_reset(link, deadline, inic_check_ready);
643 /* link occupied, -ENODEV too is an error */
644 if (rc) {
645 ata_link_printk(link, KERN_WARNING, "device not ready "
646 "after hardreset (errno=%d)\n", rc);
647 return rc;
650 inic_tf_read(ap, &tf);
651 *class = ata_dev_classify(&tf);
654 return 0;
657 static void inic_error_handler(struct ata_port *ap)
659 void __iomem *port_base = inic_port_base(ap);
661 inic_reset_port(port_base);
662 ata_std_error_handler(ap);
665 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
667 /* make DMA engine forget about the failed command */
668 if (qc->flags & ATA_QCFLAG_FAILED)
669 inic_reset_port(inic_port_base(qc->ap));
672 static void init_port(struct ata_port *ap)
674 void __iomem *port_base = inic_port_base(ap);
675 struct inic_port_priv *pp = ap->private_data;
677 /* clear packet and CPB table */
678 memset(pp->pkt, 0, sizeof(struct inic_pkt));
679 memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
681 /* setup PRD and CPB lookup table addresses */
682 writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
683 writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
686 static int inic_port_resume(struct ata_port *ap)
688 init_port(ap);
689 return 0;
692 static int inic_port_start(struct ata_port *ap)
694 struct device *dev = ap->host->dev;
695 struct inic_port_priv *pp;
696 int rc;
698 /* alloc and initialize private data */
699 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
700 if (!pp)
701 return -ENOMEM;
702 ap->private_data = pp;
704 /* Alloc resources */
705 rc = ata_port_start(ap);
706 if (rc)
707 return rc;
709 pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
710 &pp->pkt_dma, GFP_KERNEL);
711 if (!pp->pkt)
712 return -ENOMEM;
714 pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE,
715 &pp->cpb_tbl_dma, GFP_KERNEL);
716 if (!pp->cpb_tbl)
717 return -ENOMEM;
719 init_port(ap);
721 return 0;
724 static struct ata_port_operations inic_port_ops = {
725 .inherits = &sata_port_ops,
727 .check_atapi_dma = inic_check_atapi_dma,
728 .qc_prep = inic_qc_prep,
729 .qc_issue = inic_qc_issue,
730 .qc_fill_rtf = inic_qc_fill_rtf,
732 .freeze = inic_freeze,
733 .thaw = inic_thaw,
734 .hardreset = inic_hardreset,
735 .error_handler = inic_error_handler,
736 .post_internal_cmd = inic_post_internal_cmd,
738 .scr_read = inic_scr_read,
739 .scr_write = inic_scr_write,
741 .port_resume = inic_port_resume,
742 .port_start = inic_port_start,
745 static struct ata_port_info inic_port_info = {
746 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
747 .pio_mask = ATA_PIO4,
748 .mwdma_mask = ATA_MWDMA2,
749 .udma_mask = ATA_UDMA6,
750 .port_ops = &inic_port_ops
753 static int init_controller(void __iomem *mmio_base, u16 hctl)
755 int i;
756 u16 val;
758 hctl &= ~HCTL_KNOWN_BITS;
760 /* Soft reset whole controller. Spec says reset duration is 3
761 * PCI clocks, be generous and give it 10ms.
763 writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
764 readw(mmio_base + HOST_CTL); /* flush */
766 for (i = 0; i < 10; i++) {
767 msleep(1);
768 val = readw(mmio_base + HOST_CTL);
769 if (!(val & HCTL_SOFTRST))
770 break;
773 if (val & HCTL_SOFTRST)
774 return -EIO;
776 /* mask all interrupts and reset ports */
777 for (i = 0; i < NR_PORTS; i++) {
778 void __iomem *port_base = mmio_base + i * PORT_SIZE;
780 writeb(0xff, port_base + PORT_IRQ_MASK);
781 inic_reset_port(port_base);
784 /* port IRQ is masked now, unmask global IRQ */
785 writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
786 val = readw(mmio_base + HOST_IRQ_MASK);
787 val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
788 writew(val, mmio_base + HOST_IRQ_MASK);
790 return 0;
793 #ifdef CONFIG_PM
794 static int inic_pci_device_resume(struct pci_dev *pdev)
796 struct ata_host *host = dev_get_drvdata(&pdev->dev);
797 struct inic_host_priv *hpriv = host->private_data;
798 int rc;
800 rc = ata_pci_device_do_resume(pdev);
801 if (rc)
802 return rc;
804 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
805 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
806 if (rc)
807 return rc;
810 ata_host_resume(host);
812 return 0;
814 #endif
816 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
818 static int printed_version;
819 const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
820 struct ata_host *host;
821 struct inic_host_priv *hpriv;
822 void __iomem * const *iomap;
823 int mmio_bar;
824 int i, rc;
826 if (!printed_version++)
827 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
829 /* alloc host */
830 host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
831 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
832 if (!host || !hpriv)
833 return -ENOMEM;
835 host->private_data = hpriv;
837 /* Acquire resources and fill host. Note that PCI and cardbus
838 * use different BARs.
840 rc = pcim_enable_device(pdev);
841 if (rc)
842 return rc;
844 if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM)
845 mmio_bar = MMIO_BAR_PCI;
846 else
847 mmio_bar = MMIO_BAR_CARDBUS;
849 rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME);
850 if (rc)
851 return rc;
852 host->iomap = iomap = pcim_iomap_table(pdev);
853 hpriv->mmio_base = iomap[mmio_bar];
854 hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL);
856 for (i = 0; i < NR_PORTS; i++) {
857 struct ata_port *ap = host->ports[i];
859 ata_port_pbar_desc(ap, mmio_bar, -1, "mmio");
860 ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port");
863 /* Set dma_mask. This devices doesn't support 64bit addressing. */
864 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
865 if (rc) {
866 dev_printk(KERN_ERR, &pdev->dev,
867 "32-bit DMA enable failed\n");
868 return rc;
871 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
872 if (rc) {
873 dev_printk(KERN_ERR, &pdev->dev,
874 "32-bit consistent DMA enable failed\n");
875 return rc;
879 * This controller is braindamaged. dma_boundary is 0xffff
880 * like others but it will lock up the whole machine HARD if
881 * 65536 byte PRD entry is fed. Reduce maximum segment size.
883 rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
884 if (rc) {
885 dev_printk(KERN_ERR, &pdev->dev,
886 "failed to set the maximum segment size.\n");
887 return rc;
890 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
891 if (rc) {
892 dev_printk(KERN_ERR, &pdev->dev,
893 "failed to initialize controller\n");
894 return rc;
897 pci_set_master(pdev);
898 return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
899 &inic_sht);
902 static const struct pci_device_id inic_pci_tbl[] = {
903 { PCI_VDEVICE(INIT, 0x1622), },
904 { },
907 static struct pci_driver inic_pci_driver = {
908 .name = DRV_NAME,
909 .id_table = inic_pci_tbl,
910 #ifdef CONFIG_PM
911 .suspend = ata_pci_device_suspend,
912 .resume = inic_pci_device_resume,
913 #endif
914 .probe = inic_init_one,
915 .remove = ata_pci_remove_one,
918 static int __init inic_init(void)
920 return pci_register_driver(&inic_pci_driver);
923 static void __exit inic_exit(void)
925 pci_unregister_driver(&inic_pci_driver);
928 MODULE_AUTHOR("Tejun Heo");
929 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
930 MODULE_LICENSE("GPL v2");
931 MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
932 MODULE_VERSION(DRV_VERSION);
934 module_init(inic_init);
935 module_exit(inic_exit);