[PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-m68knommu / m528xsim.h
blob610774a17f70d86a00524fb1c1e88f99f9d484af
1 /****************************************************************************/
3 /*
4 * m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
6 * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
7 */
9 /****************************************************************************/
10 #ifndef m528xsim_h
11 #define m528xsim_h
12 /****************************************************************************/
14 #include <linux/config.h>
17 * Define the 5280/5282 SIM register set addresses.
19 #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
20 #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
21 #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
22 #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
23 #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
24 #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
25 #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
26 #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
27 #define MCFINTC_IRLR 0x18 /* */
28 #define MCFINTC_IACKL 0x19 /* */
29 #define MCFINTC_ICR0 0x40 /* Base ICR register */
31 #define MCFINT_VECBASE 64 /* Vector base number */
32 #define MCFINT_UART0 13 /* Interrupt number for UART0 */
33 #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
36 * SDRAM configuration registers.
38 #define MCFSIM_DCR 0x44 /* SDRAM control */
39 #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
40 #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
41 #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
42 #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
45 * Derek Cheung - 6 Feb 2005
46 * add I2C and QSPI register definition using Freescale's MCF5282
48 /* set Port AS pin for I2C or UART */
49 #define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
51 /* Interrupt Mask Register Register Low */
52 #define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
53 /* Interrupt Control Register 7 */
54 #define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
58 /*********************************************************************
60 * Inter-IC (I2C) Module
62 *********************************************************************/
63 /* Read/Write access macros for general use */
64 #define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
65 #define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
66 #define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
67 #define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
68 #define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
70 /* Bit level definitions and macros */
71 #define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
73 #define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
75 #define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
76 #define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
77 #define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
78 #define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
79 #define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
80 #define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
82 #define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
83 #define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
84 #define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
85 #define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
86 #define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
87 #define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
88 #define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
92 /*********************************************************************
94 * Queued Serial Peripheral Interface (QSPI) Module
96 *********************************************************************/
97 /* Derek - 21 Feb 2005 */
98 /* change to the format used in I2C */
99 /* Read/Write access macros for general use */
100 #define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
101 #define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
102 #define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
103 #define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
104 #define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
105 #define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
106 #define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
108 /* Bit level definitions and macros */
109 #define MCF5282_QSPI_QMR_MSTR (0x8000)
110 #define MCF5282_QSPI_QMR_DOHIE (0x4000)
111 #define MCF5282_QSPI_QMR_BITS_16 (0x0000)
112 #define MCF5282_QSPI_QMR_BITS_8 (0x2000)
113 #define MCF5282_QSPI_QMR_BITS_9 (0x2400)
114 #define MCF5282_QSPI_QMR_BITS_10 (0x2800)
115 #define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
116 #define MCF5282_QSPI_QMR_BITS_12 (0x3000)
117 #define MCF5282_QSPI_QMR_BITS_13 (0x3400)
118 #define MCF5282_QSPI_QMR_BITS_14 (0x3800)
119 #define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
120 #define MCF5282_QSPI_QMR_CPOL (0x0200)
121 #define MCF5282_QSPI_QMR_CPHA (0x0100)
122 #define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
124 #define MCF5282_QSPI_QDLYR_SPE (0x80)
125 #define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
126 #define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
128 #define MCF5282_QSPI_QWR_HALT (0x8000)
129 #define MCF5282_QSPI_QWR_WREN (0x4000)
130 #define MCF5282_QSPI_QWR_WRTO (0x2000)
131 #define MCF5282_QSPI_QWR_CSIV (0x1000)
132 #define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
133 #define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
134 #define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
136 #define MCF5282_QSPI_QIR_WCEFB (0x8000)
137 #define MCF5282_QSPI_QIR_ABRTB (0x4000)
138 #define MCF5282_QSPI_QIR_ABRTL (0x1000)
139 #define MCF5282_QSPI_QIR_WCEFE (0x0800)
140 #define MCF5282_QSPI_QIR_ABRTE (0x0400)
141 #define MCF5282_QSPI_QIR_SPIFE (0x0100)
142 #define MCF5282_QSPI_QIR_WCEF (0x0008)
143 #define MCF5282_QSPI_QIR_ABRT (0x0004)
144 #define MCF5282_QSPI_QIR_SPIF (0x0001)
146 #define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
148 #define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
149 #define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
150 #define MCF5282_QSPI_QCR_CONT (0x8000)
151 #define MCF5282_QSPI_QCR_BITSE (0x4000)
152 #define MCF5282_QSPI_QCR_DT (0x2000)
153 #define MCF5282_QSPI_QCR_DSCK (0x1000)
154 #define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
156 /****************************************************************************/
157 #endif /* m528xsim_h */