libipw: initiate cfg80211 API conversion (v2)
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / ipw2x00 / ipw2100.c
bloba9bc8a97c4e1c2eaebded10cb0fc0a72f24b8226
1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 more details.
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
19 file called LICENSE.
21 Contact Information:
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
27 <jt@hpl.hp.com>
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
31 <j@w1.fi>
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
46 Theory of Operation
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
56 filled.
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
60 done with a packet.
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
72 list (tx_pend_list)
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
77 actual payload data.
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
88 from the kernel.
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
94 ...
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
128 and associated logic
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
152 #include <asm/io.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
168 #include "ipw2100.h"
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 /* Debugging stuff */
178 #ifdef CONFIG_IPW2100_DEBUG
179 #define IPW2100_RX_DEBUG /* Reception debugging */
180 #endif
182 MODULE_DESCRIPTION(DRV_DESCRIPTION);
183 MODULE_VERSION(DRV_VERSION);
184 MODULE_AUTHOR(DRV_COPYRIGHT);
185 MODULE_LICENSE("GPL");
187 static int debug = 0;
188 static int network_mode = 0;
189 static int channel = 0;
190 static int associate = 0;
191 static int disable = 0;
192 #ifdef CONFIG_PM
193 static struct ipw2100_fw ipw2100_firmware;
194 #endif
196 #include <linux/moduleparam.h>
197 module_param(debug, int, 0444);
198 module_param_named(mode, network_mode, int, 0444);
199 module_param(channel, int, 0444);
200 module_param(associate, int, 0444);
201 module_param(disable, int, 0444);
203 MODULE_PARM_DESC(debug, "debug level");
204 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
205 MODULE_PARM_DESC(channel, "channel");
206 MODULE_PARM_DESC(associate, "auto associate when scanning (default off)");
207 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
209 static u32 ipw2100_debug_level = IPW_DL_NONE;
211 #ifdef CONFIG_IPW2100_DEBUG
212 #define IPW_DEBUG(level, message...) \
213 do { \
214 if (ipw2100_debug_level & (level)) { \
215 printk(KERN_DEBUG "ipw2100: %c %s ", \
216 in_interrupt() ? 'I' : 'U', __func__); \
217 printk(message); \
219 } while (0)
220 #else
221 #define IPW_DEBUG(level, message...) do {} while (0)
222 #endif /* CONFIG_IPW2100_DEBUG */
224 #ifdef CONFIG_IPW2100_DEBUG
225 static const char *command_types[] = {
226 "undefined",
227 "unused", /* HOST_ATTENTION */
228 "HOST_COMPLETE",
229 "unused", /* SLEEP */
230 "unused", /* HOST_POWER_DOWN */
231 "unused",
232 "SYSTEM_CONFIG",
233 "unused", /* SET_IMR */
234 "SSID",
235 "MANDATORY_BSSID",
236 "AUTHENTICATION_TYPE",
237 "ADAPTER_ADDRESS",
238 "PORT_TYPE",
239 "INTERNATIONAL_MODE",
240 "CHANNEL",
241 "RTS_THRESHOLD",
242 "FRAG_THRESHOLD",
243 "POWER_MODE",
244 "TX_RATES",
245 "BASIC_TX_RATES",
246 "WEP_KEY_INFO",
247 "unused",
248 "unused",
249 "unused",
250 "unused",
251 "WEP_KEY_INDEX",
252 "WEP_FLAGS",
253 "ADD_MULTICAST",
254 "CLEAR_ALL_MULTICAST",
255 "BEACON_INTERVAL",
256 "ATIM_WINDOW",
257 "CLEAR_STATISTICS",
258 "undefined",
259 "undefined",
260 "undefined",
261 "undefined",
262 "TX_POWER_INDEX",
263 "undefined",
264 "undefined",
265 "undefined",
266 "undefined",
267 "undefined",
268 "undefined",
269 "BROADCAST_SCAN",
270 "CARD_DISABLE",
271 "PREFERRED_BSSID",
272 "SET_SCAN_OPTIONS",
273 "SCAN_DWELL_TIME",
274 "SWEEP_TABLE",
275 "AP_OR_STATION_TABLE",
276 "GROUP_ORDINALS",
277 "SHORT_RETRY_LIMIT",
278 "LONG_RETRY_LIMIT",
279 "unused", /* SAVE_CALIBRATION */
280 "unused", /* RESTORE_CALIBRATION */
281 "undefined",
282 "undefined",
283 "undefined",
284 "HOST_PRE_POWER_DOWN",
285 "unused", /* HOST_INTERRUPT_COALESCING */
286 "undefined",
287 "CARD_DISABLE_PHY_OFF",
288 "MSDU_TX_RATES" "undefined",
289 "undefined",
290 "SET_STATION_STAT_BITS",
291 "CLEAR_STATIONS_STAT_BITS",
292 "LEAP_ROGUE_MODE",
293 "SET_SECURITY_INFORMATION",
294 "DISASSOCIATION_BSSID",
295 "SET_WPA_ASS_IE"
297 #endif
299 /* Pre-decl until we get the code solid and then we can clean it up */
300 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
301 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
302 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
304 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
305 static void ipw2100_queues_free(struct ipw2100_priv *priv);
306 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
308 static int ipw2100_fw_download(struct ipw2100_priv *priv,
309 struct ipw2100_fw *fw);
310 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
311 struct ipw2100_fw *fw);
312 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
313 size_t max);
314 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
315 size_t max);
316 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
317 struct ipw2100_fw *fw);
318 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
319 struct ipw2100_fw *fw);
320 static void ipw2100_wx_event_work(struct work_struct *work);
321 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
322 static struct iw_handler_def ipw2100_wx_handler_def;
324 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
326 *val = readl((void __iomem *)(dev->base_addr + reg));
327 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
330 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
332 writel(val, (void __iomem *)(dev->base_addr + reg));
333 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
336 static inline void read_register_word(struct net_device *dev, u32 reg,
337 u16 * val)
339 *val = readw((void __iomem *)(dev->base_addr + reg));
340 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
343 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
345 *val = readb((void __iomem *)(dev->base_addr + reg));
346 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
349 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
351 writew(val, (void __iomem *)(dev->base_addr + reg));
352 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
355 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
357 writeb(val, (void __iomem *)(dev->base_addr + reg));
358 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
361 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
363 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
364 addr & IPW_REG_INDIRECT_ADDR_MASK);
365 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
368 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
370 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
371 addr & IPW_REG_INDIRECT_ADDR_MASK);
372 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
375 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
377 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
378 addr & IPW_REG_INDIRECT_ADDR_MASK);
379 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
382 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
384 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
385 addr & IPW_REG_INDIRECT_ADDR_MASK);
386 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
389 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
391 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
392 addr & IPW_REG_INDIRECT_ADDR_MASK);
393 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
396 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
398 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
399 addr & IPW_REG_INDIRECT_ADDR_MASK);
400 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
403 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
405 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
406 addr & IPW_REG_INDIRECT_ADDR_MASK);
409 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
411 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
414 static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
415 const u8 * buf)
417 u32 aligned_addr;
418 u32 aligned_len;
419 u32 dif_len;
420 u32 i;
422 /* read first nibble byte by byte */
423 aligned_addr = addr & (~0x3);
424 dif_len = addr - aligned_addr;
425 if (dif_len) {
426 /* Start reading at aligned_addr + dif_len */
427 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
428 aligned_addr);
429 for (i = dif_len; i < 4; i++, buf++)
430 write_register_byte(dev,
431 IPW_REG_INDIRECT_ACCESS_DATA + i,
432 *buf);
434 len -= dif_len;
435 aligned_addr += 4;
438 /* read DWs through autoincrement registers */
439 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
440 aligned_len = len & (~0x3);
441 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
442 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
444 /* copy the last nibble */
445 dif_len = len - aligned_len;
446 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
447 for (i = 0; i < dif_len; i++, buf++)
448 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
449 *buf);
452 static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
453 u8 * buf)
455 u32 aligned_addr;
456 u32 aligned_len;
457 u32 dif_len;
458 u32 i;
460 /* read first nibble byte by byte */
461 aligned_addr = addr & (~0x3);
462 dif_len = addr - aligned_addr;
463 if (dif_len) {
464 /* Start reading at aligned_addr + dif_len */
465 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
466 aligned_addr);
467 for (i = dif_len; i < 4; i++, buf++)
468 read_register_byte(dev,
469 IPW_REG_INDIRECT_ACCESS_DATA + i,
470 buf);
472 len -= dif_len;
473 aligned_addr += 4;
476 /* read DWs through autoincrement registers */
477 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
478 aligned_len = len & (~0x3);
479 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
480 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
482 /* copy the last nibble */
483 dif_len = len - aligned_len;
484 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
485 for (i = 0; i < dif_len; i++, buf++)
486 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
489 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
491 return (dev->base_addr &&
492 (readl
493 ((void __iomem *)(dev->base_addr +
494 IPW_REG_DOA_DEBUG_AREA_START))
495 == IPW_DATA_DOA_DEBUG_VALUE));
498 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
499 void *val, u32 * len)
501 struct ipw2100_ordinals *ordinals = &priv->ordinals;
502 u32 addr;
503 u32 field_info;
504 u16 field_len;
505 u16 field_count;
506 u32 total_length;
508 if (ordinals->table1_addr == 0) {
509 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
510 "before they have been loaded.\n");
511 return -EINVAL;
514 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
515 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
516 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
518 printk(KERN_WARNING DRV_NAME
519 ": ordinal buffer length too small, need %zd\n",
520 IPW_ORD_TAB_1_ENTRY_SIZE);
522 return -EINVAL;
525 read_nic_dword(priv->net_dev,
526 ordinals->table1_addr + (ord << 2), &addr);
527 read_nic_dword(priv->net_dev, addr, val);
529 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
531 return 0;
534 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
536 ord -= IPW_START_ORD_TAB_2;
538 /* get the address of statistic */
539 read_nic_dword(priv->net_dev,
540 ordinals->table2_addr + (ord << 3), &addr);
542 /* get the second DW of statistics ;
543 * two 16-bit words - first is length, second is count */
544 read_nic_dword(priv->net_dev,
545 ordinals->table2_addr + (ord << 3) + sizeof(u32),
546 &field_info);
548 /* get each entry length */
549 field_len = *((u16 *) & field_info);
551 /* get number of entries */
552 field_count = *(((u16 *) & field_info) + 1);
554 /* abort if no enought memory */
555 total_length = field_len * field_count;
556 if (total_length > *len) {
557 *len = total_length;
558 return -EINVAL;
561 *len = total_length;
562 if (!total_length)
563 return 0;
565 /* read the ordinal data from the SRAM */
566 read_nic_memory(priv->net_dev, addr, total_length, val);
568 return 0;
571 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
572 "in table 2\n", ord);
574 return -EINVAL;
577 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
578 u32 * len)
580 struct ipw2100_ordinals *ordinals = &priv->ordinals;
581 u32 addr;
583 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
584 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
585 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
586 IPW_DEBUG_INFO("wrong size\n");
587 return -EINVAL;
590 read_nic_dword(priv->net_dev,
591 ordinals->table1_addr + (ord << 2), &addr);
593 write_nic_dword(priv->net_dev, addr, *val);
595 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
597 return 0;
600 IPW_DEBUG_INFO("wrong table\n");
601 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
602 return -EINVAL;
604 return -EINVAL;
607 static char *snprint_line(char *buf, size_t count,
608 const u8 * data, u32 len, u32 ofs)
610 int out, i, j, l;
611 char c;
613 out = snprintf(buf, count, "%08X", ofs);
615 for (l = 0, i = 0; i < 2; i++) {
616 out += snprintf(buf + out, count - out, " ");
617 for (j = 0; j < 8 && l < len; j++, l++)
618 out += snprintf(buf + out, count - out, "%02X ",
619 data[(i * 8 + j)]);
620 for (; j < 8; j++)
621 out += snprintf(buf + out, count - out, " ");
624 out += snprintf(buf + out, count - out, " ");
625 for (l = 0, i = 0; i < 2; i++) {
626 out += snprintf(buf + out, count - out, " ");
627 for (j = 0; j < 8 && l < len; j++, l++) {
628 c = data[(i * 8 + j)];
629 if (!isascii(c) || !isprint(c))
630 c = '.';
632 out += snprintf(buf + out, count - out, "%c", c);
635 for (; j < 8; j++)
636 out += snprintf(buf + out, count - out, " ");
639 return buf;
642 static void printk_buf(int level, const u8 * data, u32 len)
644 char line[81];
645 u32 ofs = 0;
646 if (!(ipw2100_debug_level & level))
647 return;
649 while (len) {
650 printk(KERN_DEBUG "%s\n",
651 snprint_line(line, sizeof(line), &data[ofs],
652 min(len, 16U), ofs));
653 ofs += 16;
654 len -= min(len, 16U);
658 #define MAX_RESET_BACKOFF 10
660 static void schedule_reset(struct ipw2100_priv *priv)
662 unsigned long now = get_seconds();
664 /* If we haven't received a reset request within the backoff period,
665 * then we can reset the backoff interval so this reset occurs
666 * immediately */
667 if (priv->reset_backoff &&
668 (now - priv->last_reset > priv->reset_backoff))
669 priv->reset_backoff = 0;
671 priv->last_reset = get_seconds();
673 if (!(priv->status & STATUS_RESET_PENDING)) {
674 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
675 priv->net_dev->name, priv->reset_backoff);
676 netif_carrier_off(priv->net_dev);
677 netif_stop_queue(priv->net_dev);
678 priv->status |= STATUS_RESET_PENDING;
679 if (priv->reset_backoff)
680 queue_delayed_work(priv->workqueue, &priv->reset_work,
681 priv->reset_backoff * HZ);
682 else
683 queue_delayed_work(priv->workqueue, &priv->reset_work,
686 if (priv->reset_backoff < MAX_RESET_BACKOFF)
687 priv->reset_backoff++;
689 wake_up_interruptible(&priv->wait_command_queue);
690 } else
691 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
692 priv->net_dev->name);
696 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
697 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
698 struct host_command *cmd)
700 struct list_head *element;
701 struct ipw2100_tx_packet *packet;
702 unsigned long flags;
703 int err = 0;
705 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
706 command_types[cmd->host_command], cmd->host_command,
707 cmd->host_command_length);
708 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
709 cmd->host_command_length);
711 spin_lock_irqsave(&priv->low_lock, flags);
713 if (priv->fatal_error) {
714 IPW_DEBUG_INFO
715 ("Attempt to send command while hardware in fatal error condition.\n");
716 err = -EIO;
717 goto fail_unlock;
720 if (!(priv->status & STATUS_RUNNING)) {
721 IPW_DEBUG_INFO
722 ("Attempt to send command while hardware is not running.\n");
723 err = -EIO;
724 goto fail_unlock;
727 if (priv->status & STATUS_CMD_ACTIVE) {
728 IPW_DEBUG_INFO
729 ("Attempt to send command while another command is pending.\n");
730 err = -EBUSY;
731 goto fail_unlock;
734 if (list_empty(&priv->msg_free_list)) {
735 IPW_DEBUG_INFO("no available msg buffers\n");
736 goto fail_unlock;
739 priv->status |= STATUS_CMD_ACTIVE;
740 priv->messages_sent++;
742 element = priv->msg_free_list.next;
744 packet = list_entry(element, struct ipw2100_tx_packet, list);
745 packet->jiffy_start = jiffies;
747 /* initialize the firmware command packet */
748 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
749 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
750 packet->info.c_struct.cmd->host_command_len_reg =
751 cmd->host_command_length;
752 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
754 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
755 cmd->host_command_parameters,
756 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
758 list_del(element);
759 DEC_STAT(&priv->msg_free_stat);
761 list_add_tail(element, &priv->msg_pend_list);
762 INC_STAT(&priv->msg_pend_stat);
764 ipw2100_tx_send_commands(priv);
765 ipw2100_tx_send_data(priv);
767 spin_unlock_irqrestore(&priv->low_lock, flags);
770 * We must wait for this command to complete before another
771 * command can be sent... but if we wait more than 3 seconds
772 * then there is a problem.
775 err =
776 wait_event_interruptible_timeout(priv->wait_command_queue,
777 !(priv->
778 status & STATUS_CMD_ACTIVE),
779 HOST_COMPLETE_TIMEOUT);
781 if (err == 0) {
782 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
783 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
784 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
785 priv->status &= ~STATUS_CMD_ACTIVE;
786 schedule_reset(priv);
787 return -EIO;
790 if (priv->fatal_error) {
791 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
792 priv->net_dev->name);
793 return -EIO;
796 /* !!!!! HACK TEST !!!!!
797 * When lots of debug trace statements are enabled, the driver
798 * doesn't seem to have as many firmware restart cycles...
800 * As a test, we're sticking in a 1/100s delay here */
801 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
803 return 0;
805 fail_unlock:
806 spin_unlock_irqrestore(&priv->low_lock, flags);
808 return err;
812 * Verify the values and data access of the hardware
813 * No locks needed or used. No functions called.
815 static int ipw2100_verify(struct ipw2100_priv *priv)
817 u32 data1, data2;
818 u32 address;
820 u32 val1 = 0x76543210;
821 u32 val2 = 0xFEDCBA98;
823 /* Domain 0 check - all values should be DOA_DEBUG */
824 for (address = IPW_REG_DOA_DEBUG_AREA_START;
825 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
826 read_register(priv->net_dev, address, &data1);
827 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
828 return -EIO;
831 /* Domain 1 check - use arbitrary read/write compare */
832 for (address = 0; address < 5; address++) {
833 /* The memory area is not used now */
834 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
835 val1);
836 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
837 val2);
838 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
839 &data1);
840 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
841 &data2);
842 if (val1 == data1 && val2 == data2)
843 return 0;
846 return -EIO;
851 * Loop until the CARD_DISABLED bit is the same value as the
852 * supplied parameter
854 * TODO: See if it would be more efficient to do a wait/wake
855 * cycle and have the completion event trigger the wakeup
858 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
859 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
861 int i;
862 u32 card_state;
863 u32 len = sizeof(card_state);
864 int err;
866 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
867 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
868 &card_state, &len);
869 if (err) {
870 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
871 "failed.\n");
872 return 0;
875 /* We'll break out if either the HW state says it is
876 * in the state we want, or if HOST_COMPLETE command
877 * finishes */
878 if ((card_state == state) ||
879 ((priv->status & STATUS_ENABLED) ?
880 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
881 if (state == IPW_HW_STATE_ENABLED)
882 priv->status |= STATUS_ENABLED;
883 else
884 priv->status &= ~STATUS_ENABLED;
886 return 0;
889 udelay(50);
892 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
893 state ? "DISABLED" : "ENABLED");
894 return -EIO;
897 /*********************************************************************
898 Procedure : sw_reset_and_clock
899 Purpose : Asserts s/w reset, asserts clock initialization
900 and waits for clock stabilization
901 ********************************************************************/
902 static int sw_reset_and_clock(struct ipw2100_priv *priv)
904 int i;
905 u32 r;
907 // assert s/w reset
908 write_register(priv->net_dev, IPW_REG_RESET_REG,
909 IPW_AUX_HOST_RESET_REG_SW_RESET);
911 // wait for clock stabilization
912 for (i = 0; i < 1000; i++) {
913 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
915 // check clock ready bit
916 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
917 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
918 break;
921 if (i == 1000)
922 return -EIO; // TODO: better error value
924 /* set "initialization complete" bit to move adapter to
925 * D0 state */
926 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
927 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
929 /* wait for clock stabilization */
930 for (i = 0; i < 10000; i++) {
931 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
933 /* check clock ready bit */
934 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
935 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
936 break;
939 if (i == 10000)
940 return -EIO; /* TODO: better error value */
942 /* set D0 standby bit */
943 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
944 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
945 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
947 return 0;
950 /*********************************************************************
951 Procedure : ipw2100_download_firmware
952 Purpose : Initiaze adapter after power on.
953 The sequence is:
954 1. assert s/w reset first!
955 2. awake clocks & wait for clock stabilization
956 3. hold ARC (don't ask me why...)
957 4. load Dino ucode and reset/clock init again
958 5. zero-out shared mem
959 6. download f/w
960 *******************************************************************/
961 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
963 u32 address;
964 int err;
966 #ifndef CONFIG_PM
967 /* Fetch the firmware and microcode */
968 struct ipw2100_fw ipw2100_firmware;
969 #endif
971 if (priv->fatal_error) {
972 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
973 "fatal error %d. Interface must be brought down.\n",
974 priv->net_dev->name, priv->fatal_error);
975 return -EINVAL;
977 #ifdef CONFIG_PM
978 if (!ipw2100_firmware.version) {
979 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
980 if (err) {
981 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
982 priv->net_dev->name, err);
983 priv->fatal_error = IPW2100_ERR_FW_LOAD;
984 goto fail;
987 #else
988 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
989 if (err) {
990 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
991 priv->net_dev->name, err);
992 priv->fatal_error = IPW2100_ERR_FW_LOAD;
993 goto fail;
995 #endif
996 priv->firmware_version = ipw2100_firmware.version;
998 /* s/w reset and clock stabilization */
999 err = sw_reset_and_clock(priv);
1000 if (err) {
1001 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1002 priv->net_dev->name, err);
1003 goto fail;
1006 err = ipw2100_verify(priv);
1007 if (err) {
1008 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1009 priv->net_dev->name, err);
1010 goto fail;
1013 /* Hold ARC */
1014 write_nic_dword(priv->net_dev,
1015 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1017 /* allow ARC to run */
1018 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1020 /* load microcode */
1021 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1022 if (err) {
1023 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1024 priv->net_dev->name, err);
1025 goto fail;
1028 /* release ARC */
1029 write_nic_dword(priv->net_dev,
1030 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1032 /* s/w reset and clock stabilization (again!!!) */
1033 err = sw_reset_and_clock(priv);
1034 if (err) {
1035 printk(KERN_ERR DRV_NAME
1036 ": %s: sw_reset_and_clock failed: %d\n",
1037 priv->net_dev->name, err);
1038 goto fail;
1041 /* load f/w */
1042 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1043 if (err) {
1044 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1045 priv->net_dev->name, err);
1046 goto fail;
1048 #ifndef CONFIG_PM
1050 * When the .resume method of the driver is called, the other
1051 * part of the system, i.e. the ide driver could still stay in
1052 * the suspend stage. This prevents us from loading the firmware
1053 * from the disk. --YZ
1056 /* free any storage allocated for firmware image */
1057 ipw2100_release_firmware(priv, &ipw2100_firmware);
1058 #endif
1060 /* zero out Domain 1 area indirectly (Si requirement) */
1061 for (address = IPW_HOST_FW_SHARED_AREA0;
1062 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1063 write_nic_dword(priv->net_dev, address, 0);
1064 for (address = IPW_HOST_FW_SHARED_AREA1;
1065 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1066 write_nic_dword(priv->net_dev, address, 0);
1067 for (address = IPW_HOST_FW_SHARED_AREA2;
1068 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1069 write_nic_dword(priv->net_dev, address, 0);
1070 for (address = IPW_HOST_FW_SHARED_AREA3;
1071 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1072 write_nic_dword(priv->net_dev, address, 0);
1073 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1074 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1075 write_nic_dword(priv->net_dev, address, 0);
1077 return 0;
1079 fail:
1080 ipw2100_release_firmware(priv, &ipw2100_firmware);
1081 return err;
1084 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1086 if (priv->status & STATUS_INT_ENABLED)
1087 return;
1088 priv->status |= STATUS_INT_ENABLED;
1089 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1092 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1094 if (!(priv->status & STATUS_INT_ENABLED))
1095 return;
1096 priv->status &= ~STATUS_INT_ENABLED;
1097 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1100 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1102 struct ipw2100_ordinals *ord = &priv->ordinals;
1104 IPW_DEBUG_INFO("enter\n");
1106 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1107 &ord->table1_addr);
1109 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1110 &ord->table2_addr);
1112 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1113 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1115 ord->table2_size &= 0x0000FFFF;
1117 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1118 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1119 IPW_DEBUG_INFO("exit\n");
1122 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1124 u32 reg = 0;
1126 * Set GPIO 3 writable by FW; GPIO 1 writable
1127 * by driver and enable clock
1129 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1130 IPW_BIT_GPIO_LED_OFF);
1131 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1134 static int rf_kill_active(struct ipw2100_priv *priv)
1136 #define MAX_RF_KILL_CHECKS 5
1137 #define RF_KILL_CHECK_DELAY 40
1139 unsigned short value = 0;
1140 u32 reg = 0;
1141 int i;
1143 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1144 priv->status &= ~STATUS_RF_KILL_HW;
1145 return 0;
1148 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1149 udelay(RF_KILL_CHECK_DELAY);
1150 read_register(priv->net_dev, IPW_REG_GPIO, &reg);
1151 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1154 if (value == 0)
1155 priv->status |= STATUS_RF_KILL_HW;
1156 else
1157 priv->status &= ~STATUS_RF_KILL_HW;
1159 return (value == 0);
1162 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1164 u32 addr, len;
1165 u32 val;
1168 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1170 len = sizeof(addr);
1171 if (ipw2100_get_ordinal
1172 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1173 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1174 __LINE__);
1175 return -EIO;
1178 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1181 * EEPROM version is the byte at offset 0xfd in firmware
1182 * We read 4 bytes, then shift out the byte we actually want */
1183 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1184 priv->eeprom_version = (val >> 24) & 0xFF;
1185 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1188 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1190 * notice that the EEPROM bit is reverse polarity, i.e.
1191 * bit = 0 signifies HW RF kill switch is supported
1192 * bit = 1 signifies HW RF kill switch is NOT supported
1194 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1195 if (!((val >> 24) & 0x01))
1196 priv->hw_features |= HW_FEATURE_RFKILL;
1198 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1199 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1201 return 0;
1205 * Start firmware execution after power on and intialization
1206 * The sequence is:
1207 * 1. Release ARC
1208 * 2. Wait for f/w initialization completes;
1210 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1212 int i;
1213 u32 inta, inta_mask, gpio;
1215 IPW_DEBUG_INFO("enter\n");
1217 if (priv->status & STATUS_RUNNING)
1218 return 0;
1221 * Initialize the hw - drive adapter to DO state by setting
1222 * init_done bit. Wait for clk_ready bit and Download
1223 * fw & dino ucode
1225 if (ipw2100_download_firmware(priv)) {
1226 printk(KERN_ERR DRV_NAME
1227 ": %s: Failed to power on the adapter.\n",
1228 priv->net_dev->name);
1229 return -EIO;
1232 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1233 * in the firmware RBD and TBD ring queue */
1234 ipw2100_queues_initialize(priv);
1236 ipw2100_hw_set_gpio(priv);
1238 /* TODO -- Look at disabling interrupts here to make sure none
1239 * get fired during FW initialization */
1241 /* Release ARC - clear reset bit */
1242 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1244 /* wait for f/w intialization complete */
1245 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1246 i = 5000;
1247 do {
1248 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1249 /* Todo... wait for sync command ... */
1251 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1253 /* check "init done" bit */
1254 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1255 /* reset "init done" bit */
1256 write_register(priv->net_dev, IPW_REG_INTA,
1257 IPW2100_INTA_FW_INIT_DONE);
1258 break;
1261 /* check error conditions : we check these after the firmware
1262 * check so that if there is an error, the interrupt handler
1263 * will see it and the adapter will be reset */
1264 if (inta &
1265 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1266 /* clear error conditions */
1267 write_register(priv->net_dev, IPW_REG_INTA,
1268 IPW2100_INTA_FATAL_ERROR |
1269 IPW2100_INTA_PARITY_ERROR);
1271 } while (--i);
1273 /* Clear out any pending INTAs since we aren't supposed to have
1274 * interrupts enabled at this point... */
1275 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1276 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1277 inta &= IPW_INTERRUPT_MASK;
1278 /* Clear out any pending interrupts */
1279 if (inta & inta_mask)
1280 write_register(priv->net_dev, IPW_REG_INTA, inta);
1282 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1283 i ? "SUCCESS" : "FAILED");
1285 if (!i) {
1286 printk(KERN_WARNING DRV_NAME
1287 ": %s: Firmware did not initialize.\n",
1288 priv->net_dev->name);
1289 return -EIO;
1292 /* allow firmware to write to GPIO1 & GPIO3 */
1293 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1295 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1297 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1299 /* Ready to receive commands */
1300 priv->status |= STATUS_RUNNING;
1302 /* The adapter has been reset; we are not associated */
1303 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1305 IPW_DEBUG_INFO("exit\n");
1307 return 0;
1310 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1312 if (!priv->fatal_error)
1313 return;
1315 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1316 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1317 priv->fatal_error = 0;
1320 /* NOTE: Our interrupt is disabled when this method is called */
1321 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1323 u32 reg;
1324 int i;
1326 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1328 ipw2100_hw_set_gpio(priv);
1330 /* Step 1. Stop Master Assert */
1331 write_register(priv->net_dev, IPW_REG_RESET_REG,
1332 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1334 /* Step 2. Wait for stop Master Assert
1335 * (not more than 50us, otherwise ret error */
1336 i = 5;
1337 do {
1338 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1339 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1341 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1342 break;
1343 } while (--i);
1345 priv->status &= ~STATUS_RESET_PENDING;
1347 if (!i) {
1348 IPW_DEBUG_INFO
1349 ("exit - waited too long for master assert stop\n");
1350 return -EIO;
1353 write_register(priv->net_dev, IPW_REG_RESET_REG,
1354 IPW_AUX_HOST_RESET_REG_SW_RESET);
1356 /* Reset any fatal_error conditions */
1357 ipw2100_reset_fatalerror(priv);
1359 /* At this point, the adapter is now stopped and disabled */
1360 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1361 STATUS_ASSOCIATED | STATUS_ENABLED);
1363 return 0;
1367 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1369 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1371 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1372 * if STATUS_ASSN_LOST is sent.
1374 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1377 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1379 struct host_command cmd = {
1380 .host_command = CARD_DISABLE_PHY_OFF,
1381 .host_command_sequence = 0,
1382 .host_command_length = 0,
1384 int err, i;
1385 u32 val1, val2;
1387 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1389 /* Turn off the radio */
1390 err = ipw2100_hw_send_command(priv, &cmd);
1391 if (err)
1392 return err;
1394 for (i = 0; i < 2500; i++) {
1395 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1396 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1398 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1399 (val2 & IPW2100_COMMAND_PHY_OFF))
1400 return 0;
1402 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1405 return -EIO;
1408 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1410 struct host_command cmd = {
1411 .host_command = HOST_COMPLETE,
1412 .host_command_sequence = 0,
1413 .host_command_length = 0
1415 int err = 0;
1417 IPW_DEBUG_HC("HOST_COMPLETE\n");
1419 if (priv->status & STATUS_ENABLED)
1420 return 0;
1422 mutex_lock(&priv->adapter_mutex);
1424 if (rf_kill_active(priv)) {
1425 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1426 goto fail_up;
1429 err = ipw2100_hw_send_command(priv, &cmd);
1430 if (err) {
1431 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1432 goto fail_up;
1435 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1436 if (err) {
1437 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1438 priv->net_dev->name);
1439 goto fail_up;
1442 if (priv->stop_hang_check) {
1443 priv->stop_hang_check = 0;
1444 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
1447 fail_up:
1448 mutex_unlock(&priv->adapter_mutex);
1449 return err;
1452 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1454 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1456 struct host_command cmd = {
1457 .host_command = HOST_PRE_POWER_DOWN,
1458 .host_command_sequence = 0,
1459 .host_command_length = 0,
1461 int err, i;
1462 u32 reg;
1464 if (!(priv->status & STATUS_RUNNING))
1465 return 0;
1467 priv->status |= STATUS_STOPPING;
1469 /* We can only shut down the card if the firmware is operational. So,
1470 * if we haven't reset since a fatal_error, then we can not send the
1471 * shutdown commands. */
1472 if (!priv->fatal_error) {
1473 /* First, make sure the adapter is enabled so that the PHY_OFF
1474 * command can shut it down */
1475 ipw2100_enable_adapter(priv);
1477 err = ipw2100_hw_phy_off(priv);
1478 if (err)
1479 printk(KERN_WARNING DRV_NAME
1480 ": Error disabling radio %d\n", err);
1483 * If in D0-standby mode going directly to D3 may cause a
1484 * PCI bus violation. Therefore we must change out of the D0
1485 * state.
1487 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1488 * hardware from going into standby mode and will transition
1489 * out of D0-standby if it is already in that state.
1491 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1492 * driver upon completion. Once received, the driver can
1493 * proceed to the D3 state.
1495 * Prepare for power down command to fw. This command would
1496 * take HW out of D0-standby and prepare it for D3 state.
1498 * Currently FW does not support event notification for this
1499 * event. Therefore, skip waiting for it. Just wait a fixed
1500 * 100ms
1502 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1504 err = ipw2100_hw_send_command(priv, &cmd);
1505 if (err)
1506 printk(KERN_WARNING DRV_NAME ": "
1507 "%s: Power down command failed: Error %d\n",
1508 priv->net_dev->name, err);
1509 else
1510 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1513 priv->status &= ~STATUS_ENABLED;
1516 * Set GPIO 3 writable by FW; GPIO 1 writable
1517 * by driver and enable clock
1519 ipw2100_hw_set_gpio(priv);
1522 * Power down adapter. Sequence:
1523 * 1. Stop master assert (RESET_REG[9]=1)
1524 * 2. Wait for stop master (RESET_REG[8]==1)
1525 * 3. S/w reset assert (RESET_REG[7] = 1)
1528 /* Stop master assert */
1529 write_register(priv->net_dev, IPW_REG_RESET_REG,
1530 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1532 /* wait stop master not more than 50 usec.
1533 * Otherwise return error. */
1534 for (i = 5; i > 0; i--) {
1535 udelay(10);
1537 /* Check master stop bit */
1538 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1540 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1541 break;
1544 if (i == 0)
1545 printk(KERN_WARNING DRV_NAME
1546 ": %s: Could now power down adapter.\n",
1547 priv->net_dev->name);
1549 /* assert s/w reset */
1550 write_register(priv->net_dev, IPW_REG_RESET_REG,
1551 IPW_AUX_HOST_RESET_REG_SW_RESET);
1553 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1555 return 0;
1558 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1560 struct host_command cmd = {
1561 .host_command = CARD_DISABLE,
1562 .host_command_sequence = 0,
1563 .host_command_length = 0
1565 int err = 0;
1567 IPW_DEBUG_HC("CARD_DISABLE\n");
1569 if (!(priv->status & STATUS_ENABLED))
1570 return 0;
1572 /* Make sure we clear the associated state */
1573 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1575 if (!priv->stop_hang_check) {
1576 priv->stop_hang_check = 1;
1577 cancel_delayed_work(&priv->hang_check);
1580 mutex_lock(&priv->adapter_mutex);
1582 err = ipw2100_hw_send_command(priv, &cmd);
1583 if (err) {
1584 printk(KERN_WARNING DRV_NAME
1585 ": exit - failed to send CARD_DISABLE command\n");
1586 goto fail_up;
1589 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1590 if (err) {
1591 printk(KERN_WARNING DRV_NAME
1592 ": exit - card failed to change to DISABLED\n");
1593 goto fail_up;
1596 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1598 fail_up:
1599 mutex_unlock(&priv->adapter_mutex);
1600 return err;
1603 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1605 struct host_command cmd = {
1606 .host_command = SET_SCAN_OPTIONS,
1607 .host_command_sequence = 0,
1608 .host_command_length = 8
1610 int err;
1612 IPW_DEBUG_INFO("enter\n");
1614 IPW_DEBUG_SCAN("setting scan options\n");
1616 cmd.host_command_parameters[0] = 0;
1618 if (!(priv->config & CFG_ASSOCIATE))
1619 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1620 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1621 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1622 if (priv->config & CFG_PASSIVE_SCAN)
1623 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1625 cmd.host_command_parameters[1] = priv->channel_mask;
1627 err = ipw2100_hw_send_command(priv, &cmd);
1629 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1630 cmd.host_command_parameters[0]);
1632 return err;
1635 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1637 struct host_command cmd = {
1638 .host_command = BROADCAST_SCAN,
1639 .host_command_sequence = 0,
1640 .host_command_length = 4
1642 int err;
1644 IPW_DEBUG_HC("START_SCAN\n");
1646 cmd.host_command_parameters[0] = 0;
1648 /* No scanning if in monitor mode */
1649 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1650 return 1;
1652 if (priv->status & STATUS_SCANNING) {
1653 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1654 return 0;
1657 IPW_DEBUG_INFO("enter\n");
1659 /* Not clearing here; doing so makes iwlist always return nothing...
1661 * We should modify the table logic to use aging tables vs. clearing
1662 * the table on each scan start.
1664 IPW_DEBUG_SCAN("starting scan\n");
1666 priv->status |= STATUS_SCANNING;
1667 err = ipw2100_hw_send_command(priv, &cmd);
1668 if (err)
1669 priv->status &= ~STATUS_SCANNING;
1671 IPW_DEBUG_INFO("exit\n");
1673 return err;
1676 static const struct libipw_geo ipw_geos[] = {
1677 { /* Restricted */
1678 "---",
1679 .bg_channels = 14,
1680 .bg = {{2412, 1}, {2417, 2}, {2422, 3},
1681 {2427, 4}, {2432, 5}, {2437, 6},
1682 {2442, 7}, {2447, 8}, {2452, 9},
1683 {2457, 10}, {2462, 11}, {2467, 12},
1684 {2472, 13}, {2484, 14}},
1688 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1690 unsigned long flags;
1691 int rc = 0;
1692 u32 lock;
1693 u32 ord_len = sizeof(lock);
1695 /* Age scan list entries found before suspend */
1696 if (priv->suspend_time) {
1697 libipw_networks_age(priv->ieee, priv->suspend_time);
1698 priv->suspend_time = 0;
1701 /* Quiet if manually disabled. */
1702 if (priv->status & STATUS_RF_KILL_SW) {
1703 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1704 "switch\n", priv->net_dev->name);
1705 return 0;
1708 /* the ipw2100 hardware really doesn't want power management delays
1709 * longer than 175usec
1711 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100", 175);
1713 /* If the interrupt is enabled, turn it off... */
1714 spin_lock_irqsave(&priv->low_lock, flags);
1715 ipw2100_disable_interrupts(priv);
1717 /* Reset any fatal_error conditions */
1718 ipw2100_reset_fatalerror(priv);
1719 spin_unlock_irqrestore(&priv->low_lock, flags);
1721 if (priv->status & STATUS_POWERED ||
1722 (priv->status & STATUS_RESET_PENDING)) {
1723 /* Power cycle the card ... */
1724 if (ipw2100_power_cycle_adapter(priv)) {
1725 printk(KERN_WARNING DRV_NAME
1726 ": %s: Could not cycle adapter.\n",
1727 priv->net_dev->name);
1728 rc = 1;
1729 goto exit;
1731 } else
1732 priv->status |= STATUS_POWERED;
1734 /* Load the firmware, start the clocks, etc. */
1735 if (ipw2100_start_adapter(priv)) {
1736 printk(KERN_ERR DRV_NAME
1737 ": %s: Failed to start the firmware.\n",
1738 priv->net_dev->name);
1739 rc = 1;
1740 goto exit;
1743 ipw2100_initialize_ordinals(priv);
1745 /* Determine capabilities of this particular HW configuration */
1746 if (ipw2100_get_hw_features(priv)) {
1747 printk(KERN_ERR DRV_NAME
1748 ": %s: Failed to determine HW features.\n",
1749 priv->net_dev->name);
1750 rc = 1;
1751 goto exit;
1754 /* Initialize the geo */
1755 if (libipw_set_geo(priv->ieee, &ipw_geos[0])) {
1756 printk(KERN_WARNING DRV_NAME "Could not set geo\n");
1757 return 0;
1759 priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
1761 lock = LOCK_NONE;
1762 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1763 printk(KERN_ERR DRV_NAME
1764 ": %s: Failed to clear ordinal lock.\n",
1765 priv->net_dev->name);
1766 rc = 1;
1767 goto exit;
1770 priv->status &= ~STATUS_SCANNING;
1772 if (rf_kill_active(priv)) {
1773 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1774 priv->net_dev->name);
1776 if (priv->stop_rf_kill) {
1777 priv->stop_rf_kill = 0;
1778 queue_delayed_work(priv->workqueue, &priv->rf_kill,
1779 round_jiffies_relative(HZ));
1782 deferred = 1;
1785 /* Turn on the interrupt so that commands can be processed */
1786 ipw2100_enable_interrupts(priv);
1788 /* Send all of the commands that must be sent prior to
1789 * HOST_COMPLETE */
1790 if (ipw2100_adapter_setup(priv)) {
1791 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1792 priv->net_dev->name);
1793 rc = 1;
1794 goto exit;
1797 if (!deferred) {
1798 /* Enable the adapter - sends HOST_COMPLETE */
1799 if (ipw2100_enable_adapter(priv)) {
1800 printk(KERN_ERR DRV_NAME ": "
1801 "%s: failed in call to enable adapter.\n",
1802 priv->net_dev->name);
1803 ipw2100_hw_stop_adapter(priv);
1804 rc = 1;
1805 goto exit;
1808 /* Start a scan . . . */
1809 ipw2100_set_scan_options(priv);
1810 ipw2100_start_scan(priv);
1813 exit:
1814 return rc;
1817 /* Called by register_netdev() */
1818 static int ipw2100_net_init(struct net_device *dev)
1820 struct ipw2100_priv *priv = libipw_priv(dev);
1821 return ipw2100_up(priv, 1);
1824 static void ipw2100_down(struct ipw2100_priv *priv)
1826 unsigned long flags;
1827 union iwreq_data wrqu = {
1828 .ap_addr = {
1829 .sa_family = ARPHRD_ETHER}
1831 int associated = priv->status & STATUS_ASSOCIATED;
1833 /* Kill the RF switch timer */
1834 if (!priv->stop_rf_kill) {
1835 priv->stop_rf_kill = 1;
1836 cancel_delayed_work(&priv->rf_kill);
1839 /* Kill the firmware hang check timer */
1840 if (!priv->stop_hang_check) {
1841 priv->stop_hang_check = 1;
1842 cancel_delayed_work(&priv->hang_check);
1845 /* Kill any pending resets */
1846 if (priv->status & STATUS_RESET_PENDING)
1847 cancel_delayed_work(&priv->reset_work);
1849 /* Make sure the interrupt is on so that FW commands will be
1850 * processed correctly */
1851 spin_lock_irqsave(&priv->low_lock, flags);
1852 ipw2100_enable_interrupts(priv);
1853 spin_unlock_irqrestore(&priv->low_lock, flags);
1855 if (ipw2100_hw_stop_adapter(priv))
1856 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1857 priv->net_dev->name);
1859 /* Do not disable the interrupt until _after_ we disable
1860 * the adaptor. Otherwise the CARD_DISABLE command will never
1861 * be ack'd by the firmware */
1862 spin_lock_irqsave(&priv->low_lock, flags);
1863 ipw2100_disable_interrupts(priv);
1864 spin_unlock_irqrestore(&priv->low_lock, flags);
1866 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100",
1867 PM_QOS_DEFAULT_VALUE);
1869 /* We have to signal any supplicant if we are disassociating */
1870 if (associated)
1871 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1873 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1874 netif_carrier_off(priv->net_dev);
1875 netif_stop_queue(priv->net_dev);
1878 static void ipw2100_reset_adapter(struct work_struct *work)
1880 struct ipw2100_priv *priv =
1881 container_of(work, struct ipw2100_priv, reset_work.work);
1882 unsigned long flags;
1883 union iwreq_data wrqu = {
1884 .ap_addr = {
1885 .sa_family = ARPHRD_ETHER}
1887 int associated = priv->status & STATUS_ASSOCIATED;
1889 spin_lock_irqsave(&priv->low_lock, flags);
1890 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1891 priv->resets++;
1892 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1893 priv->status |= STATUS_SECURITY_UPDATED;
1895 /* Force a power cycle even if interface hasn't been opened
1896 * yet */
1897 cancel_delayed_work(&priv->reset_work);
1898 priv->status |= STATUS_RESET_PENDING;
1899 spin_unlock_irqrestore(&priv->low_lock, flags);
1901 mutex_lock(&priv->action_mutex);
1902 /* stop timed checks so that they don't interfere with reset */
1903 priv->stop_hang_check = 1;
1904 cancel_delayed_work(&priv->hang_check);
1906 /* We have to signal any supplicant if we are disassociating */
1907 if (associated)
1908 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1910 ipw2100_up(priv, 0);
1911 mutex_unlock(&priv->action_mutex);
1915 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
1918 #define MAC_ASSOCIATION_READ_DELAY (HZ)
1919 int ret;
1920 unsigned int len, essid_len;
1921 char essid[IW_ESSID_MAX_SIZE];
1922 u32 txrate;
1923 u32 chan;
1924 char *txratename;
1925 u8 bssid[ETH_ALEN];
1926 DECLARE_SSID_BUF(ssid);
1929 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
1930 * an actual MAC of the AP. Seems like FW sets this
1931 * address too late. Read it later and expose through
1932 * /proc or schedule a later task to query and update
1935 essid_len = IW_ESSID_MAX_SIZE;
1936 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
1937 essid, &essid_len);
1938 if (ret) {
1939 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1940 __LINE__);
1941 return;
1944 len = sizeof(u32);
1945 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
1946 if (ret) {
1947 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1948 __LINE__);
1949 return;
1952 len = sizeof(u32);
1953 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
1954 if (ret) {
1955 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1956 __LINE__);
1957 return;
1959 len = ETH_ALEN;
1960 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
1961 if (ret) {
1962 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1963 __LINE__);
1964 return;
1966 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
1968 switch (txrate) {
1969 case TX_RATE_1_MBIT:
1970 txratename = "1Mbps";
1971 break;
1972 case TX_RATE_2_MBIT:
1973 txratename = "2Mbsp";
1974 break;
1975 case TX_RATE_5_5_MBIT:
1976 txratename = "5.5Mbps";
1977 break;
1978 case TX_RATE_11_MBIT:
1979 txratename = "11Mbps";
1980 break;
1981 default:
1982 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
1983 txratename = "unknown rate";
1984 break;
1987 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
1988 priv->net_dev->name, print_ssid(ssid, essid, essid_len),
1989 txratename, chan, bssid);
1991 /* now we copy read ssid into dev */
1992 if (!(priv->config & CFG_STATIC_ESSID)) {
1993 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
1994 memcpy(priv->essid, essid, priv->essid_len);
1996 priv->channel = chan;
1997 memcpy(priv->bssid, bssid, ETH_ALEN);
1999 priv->status |= STATUS_ASSOCIATING;
2000 priv->connect_start = get_seconds();
2002 queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
2005 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
2006 int length, int batch_mode)
2008 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
2009 struct host_command cmd = {
2010 .host_command = SSID,
2011 .host_command_sequence = 0,
2012 .host_command_length = ssid_len
2014 int err;
2015 DECLARE_SSID_BUF(ssid);
2017 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len));
2019 if (ssid_len)
2020 memcpy(cmd.host_command_parameters, essid, ssid_len);
2022 if (!batch_mode) {
2023 err = ipw2100_disable_adapter(priv);
2024 if (err)
2025 return err;
2028 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2029 * disable auto association -- so we cheat by setting a bogus SSID */
2030 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2031 int i;
2032 u8 *bogus = (u8 *) cmd.host_command_parameters;
2033 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2034 bogus[i] = 0x18 + i;
2035 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2038 /* NOTE: We always send the SSID command even if the provided ESSID is
2039 * the same as what we currently think is set. */
2041 err = ipw2100_hw_send_command(priv, &cmd);
2042 if (!err) {
2043 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2044 memcpy(priv->essid, essid, ssid_len);
2045 priv->essid_len = ssid_len;
2048 if (!batch_mode) {
2049 if (ipw2100_enable_adapter(priv))
2050 err = -EIO;
2053 return err;
2056 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2058 DECLARE_SSID_BUF(ssid);
2060 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2061 "disassociated: '%s' %pM \n",
2062 print_ssid(ssid, priv->essid, priv->essid_len),
2063 priv->bssid);
2065 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2067 if (priv->status & STATUS_STOPPING) {
2068 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2069 return;
2072 memset(priv->bssid, 0, ETH_ALEN);
2073 memset(priv->ieee->bssid, 0, ETH_ALEN);
2075 netif_carrier_off(priv->net_dev);
2076 netif_stop_queue(priv->net_dev);
2078 if (!(priv->status & STATUS_RUNNING))
2079 return;
2081 if (priv->status & STATUS_SECURITY_UPDATED)
2082 queue_delayed_work(priv->workqueue, &priv->security_work, 0);
2084 queue_delayed_work(priv->workqueue, &priv->wx_event_work, 0);
2087 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2089 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2090 priv->net_dev->name);
2092 /* RF_KILL is now enabled (else we wouldn't be here) */
2093 priv->status |= STATUS_RF_KILL_HW;
2095 /* Make sure the RF Kill check timer is running */
2096 priv->stop_rf_kill = 0;
2097 cancel_delayed_work(&priv->rf_kill);
2098 queue_delayed_work(priv->workqueue, &priv->rf_kill,
2099 round_jiffies_relative(HZ));
2102 static void send_scan_event(void *data)
2104 struct ipw2100_priv *priv = data;
2105 union iwreq_data wrqu;
2107 wrqu.data.length = 0;
2108 wrqu.data.flags = 0;
2109 wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
2112 static void ipw2100_scan_event_later(struct work_struct *work)
2114 send_scan_event(container_of(work, struct ipw2100_priv,
2115 scan_event_later.work));
2118 static void ipw2100_scan_event_now(struct work_struct *work)
2120 send_scan_event(container_of(work, struct ipw2100_priv,
2121 scan_event_now));
2124 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2126 IPW_DEBUG_SCAN("scan complete\n");
2127 /* Age the scan results... */
2128 priv->ieee->scans++;
2129 priv->status &= ~STATUS_SCANNING;
2131 /* Only userspace-requested scan completion events go out immediately */
2132 if (!priv->user_requested_scan) {
2133 if (!delayed_work_pending(&priv->scan_event_later))
2134 queue_delayed_work(priv->workqueue,
2135 &priv->scan_event_later,
2136 round_jiffies_relative(msecs_to_jiffies(4000)));
2137 } else {
2138 priv->user_requested_scan = 0;
2139 cancel_delayed_work(&priv->scan_event_later);
2140 queue_work(priv->workqueue, &priv->scan_event_now);
2144 #ifdef CONFIG_IPW2100_DEBUG
2145 #define IPW2100_HANDLER(v, f) { v, f, # v }
2146 struct ipw2100_status_indicator {
2147 int status;
2148 void (*cb) (struct ipw2100_priv * priv, u32 status);
2149 char *name;
2151 #else
2152 #define IPW2100_HANDLER(v, f) { v, f }
2153 struct ipw2100_status_indicator {
2154 int status;
2155 void (*cb) (struct ipw2100_priv * priv, u32 status);
2157 #endif /* CONFIG_IPW2100_DEBUG */
2159 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2161 IPW_DEBUG_SCAN("Scanning...\n");
2162 priv->status |= STATUS_SCANNING;
2165 static const struct ipw2100_status_indicator status_handlers[] = {
2166 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2167 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2168 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2169 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2170 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2171 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2172 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2173 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2174 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2175 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2176 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2177 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2178 IPW2100_HANDLER(-1, NULL)
2181 static void isr_status_change(struct ipw2100_priv *priv, int status)
2183 int i;
2185 if (status == IPW_STATE_SCANNING &&
2186 priv->status & STATUS_ASSOCIATED &&
2187 !(priv->status & STATUS_SCANNING)) {
2188 IPW_DEBUG_INFO("Scan detected while associated, with "
2189 "no scan request. Restarting firmware.\n");
2191 /* Wake up any sleeping jobs */
2192 schedule_reset(priv);
2195 for (i = 0; status_handlers[i].status != -1; i++) {
2196 if (status == status_handlers[i].status) {
2197 IPW_DEBUG_NOTIF("Status change: %s\n",
2198 status_handlers[i].name);
2199 if (status_handlers[i].cb)
2200 status_handlers[i].cb(priv, status);
2201 priv->wstats.status = status;
2202 return;
2206 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2209 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2210 struct ipw2100_cmd_header *cmd)
2212 #ifdef CONFIG_IPW2100_DEBUG
2213 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2214 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2215 command_types[cmd->host_command_reg],
2216 cmd->host_command_reg);
2218 #endif
2219 if (cmd->host_command_reg == HOST_COMPLETE)
2220 priv->status |= STATUS_ENABLED;
2222 if (cmd->host_command_reg == CARD_DISABLE)
2223 priv->status &= ~STATUS_ENABLED;
2225 priv->status &= ~STATUS_CMD_ACTIVE;
2227 wake_up_interruptible(&priv->wait_command_queue);
2230 #ifdef CONFIG_IPW2100_DEBUG
2231 static const char *frame_types[] = {
2232 "COMMAND_STATUS_VAL",
2233 "STATUS_CHANGE_VAL",
2234 "P80211_DATA_VAL",
2235 "P8023_DATA_VAL",
2236 "HOST_NOTIFICATION_VAL"
2238 #endif
2240 static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2241 struct ipw2100_rx_packet *packet)
2243 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2244 if (!packet->skb)
2245 return -ENOMEM;
2247 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2248 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2249 sizeof(struct ipw2100_rx),
2250 PCI_DMA_FROMDEVICE);
2251 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2252 * dma_addr */
2254 return 0;
2257 #define SEARCH_ERROR 0xffffffff
2258 #define SEARCH_FAIL 0xfffffffe
2259 #define SEARCH_SUCCESS 0xfffffff0
2260 #define SEARCH_DISCARD 0
2261 #define SEARCH_SNAPSHOT 1
2263 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2264 static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2266 int i;
2267 if (!priv->snapshot[0])
2268 return;
2269 for (i = 0; i < 0x30; i++)
2270 kfree(priv->snapshot[i]);
2271 priv->snapshot[0] = NULL;
2274 #ifdef IPW2100_DEBUG_C3
2275 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2277 int i;
2278 if (priv->snapshot[0])
2279 return 1;
2280 for (i = 0; i < 0x30; i++) {
2281 priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
2282 if (!priv->snapshot[i]) {
2283 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2284 "buffer %d\n", priv->net_dev->name, i);
2285 while (i > 0)
2286 kfree(priv->snapshot[--i]);
2287 priv->snapshot[0] = NULL;
2288 return 0;
2292 return 1;
2295 static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2296 size_t len, int mode)
2298 u32 i, j;
2299 u32 tmp;
2300 u8 *s, *d;
2301 u32 ret;
2303 s = in_buf;
2304 if (mode == SEARCH_SNAPSHOT) {
2305 if (!ipw2100_snapshot_alloc(priv))
2306 mode = SEARCH_DISCARD;
2309 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2310 read_nic_dword(priv->net_dev, i, &tmp);
2311 if (mode == SEARCH_SNAPSHOT)
2312 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2313 if (ret == SEARCH_FAIL) {
2314 d = (u8 *) & tmp;
2315 for (j = 0; j < 4; j++) {
2316 if (*s != *d) {
2317 s = in_buf;
2318 continue;
2321 s++;
2322 d++;
2324 if ((s - in_buf) == len)
2325 ret = (i + j) - len + 1;
2327 } else if (mode == SEARCH_DISCARD)
2328 return ret;
2331 return ret;
2333 #endif
2337 * 0) Disconnect the SKB from the firmware (just unmap)
2338 * 1) Pack the ETH header into the SKB
2339 * 2) Pass the SKB to the network stack
2341 * When packet is provided by the firmware, it contains the following:
2343 * . libipw_hdr
2344 * . libipw_snap_hdr
2346 * The size of the constructed ethernet
2349 #ifdef IPW2100_RX_DEBUG
2350 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2351 #endif
2353 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2355 #ifdef IPW2100_DEBUG_C3
2356 struct ipw2100_status *status = &priv->status_queue.drv[i];
2357 u32 match, reg;
2358 int j;
2359 #endif
2361 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2362 i * sizeof(struct ipw2100_status));
2364 #ifdef IPW2100_DEBUG_C3
2365 /* Halt the firmware so we can get a good image */
2366 write_register(priv->net_dev, IPW_REG_RESET_REG,
2367 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2368 j = 5;
2369 do {
2370 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2371 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
2373 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2374 break;
2375 } while (j--);
2377 match = ipw2100_match_buf(priv, (u8 *) status,
2378 sizeof(struct ipw2100_status),
2379 SEARCH_SNAPSHOT);
2380 if (match < SEARCH_SUCCESS)
2381 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2382 "offset 0x%06X, length %d:\n",
2383 priv->net_dev->name, match,
2384 sizeof(struct ipw2100_status));
2385 else
2386 IPW_DEBUG_INFO("%s: No DMA status match in "
2387 "Firmware.\n", priv->net_dev->name);
2389 printk_buf((u8 *) priv->status_queue.drv,
2390 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2391 #endif
2393 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2394 priv->net_dev->stats.rx_errors++;
2395 schedule_reset(priv);
2398 static void isr_rx(struct ipw2100_priv *priv, int i,
2399 struct libipw_rx_stats *stats)
2401 struct net_device *dev = priv->net_dev;
2402 struct ipw2100_status *status = &priv->status_queue.drv[i];
2403 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2405 IPW_DEBUG_RX("Handler...\n");
2407 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2408 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2409 " Dropping.\n",
2410 dev->name,
2411 status->frame_size, skb_tailroom(packet->skb));
2412 dev->stats.rx_errors++;
2413 return;
2416 if (unlikely(!netif_running(dev))) {
2417 dev->stats.rx_errors++;
2418 priv->wstats.discard.misc++;
2419 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2420 return;
2423 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2424 !(priv->status & STATUS_ASSOCIATED))) {
2425 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2426 priv->wstats.discard.misc++;
2427 return;
2430 pci_unmap_single(priv->pci_dev,
2431 packet->dma_addr,
2432 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2434 skb_put(packet->skb, status->frame_size);
2436 #ifdef IPW2100_RX_DEBUG
2437 /* Make a copy of the frame so we can dump it to the logs if
2438 * libipw_rx fails */
2439 skb_copy_from_linear_data(packet->skb, packet_data,
2440 min_t(u32, status->frame_size,
2441 IPW_RX_NIC_BUFFER_LENGTH));
2442 #endif
2444 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2445 #ifdef IPW2100_RX_DEBUG
2446 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2447 dev->name);
2448 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2449 #endif
2450 dev->stats.rx_errors++;
2452 /* libipw_rx failed, so it didn't free the SKB */
2453 dev_kfree_skb_any(packet->skb);
2454 packet->skb = NULL;
2457 /* We need to allocate a new SKB and attach it to the RDB. */
2458 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2459 printk(KERN_WARNING DRV_NAME ": "
2460 "%s: Unable to allocate SKB onto RBD ring - disabling "
2461 "adapter.\n", dev->name);
2462 /* TODO: schedule adapter shutdown */
2463 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2466 /* Update the RDB entry */
2467 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2470 #ifdef CONFIG_IPW2100_MONITOR
2472 static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
2473 struct libipw_rx_stats *stats)
2475 struct net_device *dev = priv->net_dev;
2476 struct ipw2100_status *status = &priv->status_queue.drv[i];
2477 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2479 /* Magic struct that slots into the radiotap header -- no reason
2480 * to build this manually element by element, we can write it much
2481 * more efficiently than we can parse it. ORDER MATTERS HERE */
2482 struct ipw_rt_hdr {
2483 struct ieee80211_radiotap_header rt_hdr;
2484 s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
2485 } *ipw_rt;
2487 IPW_DEBUG_RX("Handler...\n");
2489 if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
2490 sizeof(struct ipw_rt_hdr))) {
2491 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2492 " Dropping.\n",
2493 dev->name,
2494 status->frame_size,
2495 skb_tailroom(packet->skb));
2496 dev->stats.rx_errors++;
2497 return;
2500 if (unlikely(!netif_running(dev))) {
2501 dev->stats.rx_errors++;
2502 priv->wstats.discard.misc++;
2503 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2504 return;
2507 if (unlikely(priv->config & CFG_CRC_CHECK &&
2508 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2509 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2510 dev->stats.rx_errors++;
2511 return;
2514 pci_unmap_single(priv->pci_dev, packet->dma_addr,
2515 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2516 memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
2517 packet->skb->data, status->frame_size);
2519 ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
2521 ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
2522 ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
2523 ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */
2525 ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
2527 ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
2529 skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
2531 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2532 dev->stats.rx_errors++;
2534 /* libipw_rx failed, so it didn't free the SKB */
2535 dev_kfree_skb_any(packet->skb);
2536 packet->skb = NULL;
2539 /* We need to allocate a new SKB and attach it to the RDB. */
2540 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2541 IPW_DEBUG_WARNING(
2542 "%s: Unable to allocate SKB onto RBD ring - disabling "
2543 "adapter.\n", dev->name);
2544 /* TODO: schedule adapter shutdown */
2545 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2548 /* Update the RDB entry */
2549 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2552 #endif
2554 static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2556 struct ipw2100_status *status = &priv->status_queue.drv[i];
2557 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2558 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2560 switch (frame_type) {
2561 case COMMAND_STATUS_VAL:
2562 return (status->frame_size != sizeof(u->rx_data.command));
2563 case STATUS_CHANGE_VAL:
2564 return (status->frame_size != sizeof(u->rx_data.status));
2565 case HOST_NOTIFICATION_VAL:
2566 return (status->frame_size < sizeof(u->rx_data.notification));
2567 case P80211_DATA_VAL:
2568 case P8023_DATA_VAL:
2569 #ifdef CONFIG_IPW2100_MONITOR
2570 return 0;
2571 #else
2572 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2573 case IEEE80211_FTYPE_MGMT:
2574 case IEEE80211_FTYPE_CTL:
2575 return 0;
2576 case IEEE80211_FTYPE_DATA:
2577 return (status->frame_size >
2578 IPW_MAX_802_11_PAYLOAD_LENGTH);
2580 #endif
2583 return 1;
2587 * ipw2100 interrupts are disabled at this point, and the ISR
2588 * is the only code that calls this method. So, we do not need
2589 * to play with any locks.
2591 * RX Queue works as follows:
2593 * Read index - firmware places packet in entry identified by the
2594 * Read index and advances Read index. In this manner,
2595 * Read index will always point to the next packet to
2596 * be filled--but not yet valid.
2598 * Write index - driver fills this entry with an unused RBD entry.
2599 * This entry has not filled by the firmware yet.
2601 * In between the W and R indexes are the RBDs that have been received
2602 * but not yet processed.
2604 * The process of handling packets will start at WRITE + 1 and advance
2605 * until it reaches the READ index.
2607 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2610 static void __ipw2100_rx_process(struct ipw2100_priv *priv)
2612 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2613 struct ipw2100_status_queue *sq = &priv->status_queue;
2614 struct ipw2100_rx_packet *packet;
2615 u16 frame_type;
2616 u32 r, w, i, s;
2617 struct ipw2100_rx *u;
2618 struct libipw_rx_stats stats = {
2619 .mac_time = jiffies,
2622 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2623 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2625 if (r >= rxq->entries) {
2626 IPW_DEBUG_RX("exit - bad read index\n");
2627 return;
2630 i = (rxq->next + 1) % rxq->entries;
2631 s = i;
2632 while (i != r) {
2633 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2634 r, rxq->next, i); */
2636 packet = &priv->rx_buffers[i];
2638 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2639 * the correct values */
2640 pci_dma_sync_single_for_cpu(priv->pci_dev,
2641 sq->nic +
2642 sizeof(struct ipw2100_status) * i,
2643 sizeof(struct ipw2100_status),
2644 PCI_DMA_FROMDEVICE);
2646 /* Sync the DMA for the RX buffer so CPU is sure to get
2647 * the correct values */
2648 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2649 sizeof(struct ipw2100_rx),
2650 PCI_DMA_FROMDEVICE);
2652 if (unlikely(ipw2100_corruption_check(priv, i))) {
2653 ipw2100_corruption_detected(priv, i);
2654 goto increment;
2657 u = packet->rxp;
2658 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2659 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2660 stats.len = sq->drv[i].frame_size;
2662 stats.mask = 0;
2663 if (stats.rssi != 0)
2664 stats.mask |= LIBIPW_STATMASK_RSSI;
2665 stats.freq = LIBIPW_24GHZ_BAND;
2667 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2668 priv->net_dev->name, frame_types[frame_type],
2669 stats.len);
2671 switch (frame_type) {
2672 case COMMAND_STATUS_VAL:
2673 /* Reset Rx watchdog */
2674 isr_rx_complete_command(priv, &u->rx_data.command);
2675 break;
2677 case STATUS_CHANGE_VAL:
2678 isr_status_change(priv, u->rx_data.status);
2679 break;
2681 case P80211_DATA_VAL:
2682 case P8023_DATA_VAL:
2683 #ifdef CONFIG_IPW2100_MONITOR
2684 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2685 isr_rx_monitor(priv, i, &stats);
2686 break;
2688 #endif
2689 if (stats.len < sizeof(struct libipw_hdr_3addr))
2690 break;
2691 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2692 case IEEE80211_FTYPE_MGMT:
2693 libipw_rx_mgt(priv->ieee,
2694 &u->rx_data.header, &stats);
2695 break;
2697 case IEEE80211_FTYPE_CTL:
2698 break;
2700 case IEEE80211_FTYPE_DATA:
2701 isr_rx(priv, i, &stats);
2702 break;
2705 break;
2708 increment:
2709 /* clear status field associated with this RBD */
2710 rxq->drv[i].status.info.field = 0;
2712 i = (i + 1) % rxq->entries;
2715 if (i != s) {
2716 /* backtrack one entry, wrapping to end if at 0 */
2717 rxq->next = (i ? i : rxq->entries) - 1;
2719 write_register(priv->net_dev,
2720 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2725 * __ipw2100_tx_process
2727 * This routine will determine whether the next packet on
2728 * the fw_pend_list has been processed by the firmware yet.
2730 * If not, then it does nothing and returns.
2732 * If so, then it removes the item from the fw_pend_list, frees
2733 * any associated storage, and places the item back on the
2734 * free list of its source (either msg_free_list or tx_free_list)
2736 * TX Queue works as follows:
2738 * Read index - points to the next TBD that the firmware will
2739 * process. The firmware will read the data, and once
2740 * done processing, it will advance the Read index.
2742 * Write index - driver fills this entry with an constructed TBD
2743 * entry. The Write index is not advanced until the
2744 * packet has been configured.
2746 * In between the W and R indexes are the TBDs that have NOT been
2747 * processed. Lagging behind the R index are packets that have
2748 * been processed but have not been freed by the driver.
2750 * In order to free old storage, an internal index will be maintained
2751 * that points to the next packet to be freed. When all used
2752 * packets have been freed, the oldest index will be the same as the
2753 * firmware's read index.
2755 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2757 * Because the TBD structure can not contain arbitrary data, the
2758 * driver must keep an internal queue of cached allocations such that
2759 * it can put that data back into the tx_free_list and msg_free_list
2760 * for use by future command and data packets.
2763 static int __ipw2100_tx_process(struct ipw2100_priv *priv)
2765 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2766 struct ipw2100_bd *tbd;
2767 struct list_head *element;
2768 struct ipw2100_tx_packet *packet;
2769 int descriptors_used;
2770 int e, i;
2771 u32 r, w, frag_num = 0;
2773 if (list_empty(&priv->fw_pend_list))
2774 return 0;
2776 element = priv->fw_pend_list.next;
2778 packet = list_entry(element, struct ipw2100_tx_packet, list);
2779 tbd = &txq->drv[packet->index];
2781 /* Determine how many TBD entries must be finished... */
2782 switch (packet->type) {
2783 case COMMAND:
2784 /* COMMAND uses only one slot; don't advance */
2785 descriptors_used = 1;
2786 e = txq->oldest;
2787 break;
2789 case DATA:
2790 /* DATA uses two slots; advance and loop position. */
2791 descriptors_used = tbd->num_fragments;
2792 frag_num = tbd->num_fragments - 1;
2793 e = txq->oldest + frag_num;
2794 e %= txq->entries;
2795 break;
2797 default:
2798 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2799 priv->net_dev->name);
2800 return 0;
2803 /* if the last TBD is not done by NIC yet, then packet is
2804 * not ready to be released.
2807 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2808 &r);
2809 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2810 &w);
2811 if (w != txq->next)
2812 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2813 priv->net_dev->name);
2816 * txq->next is the index of the last packet written txq->oldest is
2817 * the index of the r is the index of the next packet to be read by
2818 * firmware
2822 * Quick graphic to help you visualize the following
2823 * if / else statement
2825 * ===>| s---->|===============
2826 * e>|
2827 * | a | b | c | d | e | f | g | h | i | j | k | l
2828 * r---->|
2831 * w - updated by driver
2832 * r - updated by firmware
2833 * s - start of oldest BD entry (txq->oldest)
2834 * e - end of oldest BD entry
2837 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2838 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2839 return 0;
2842 list_del(element);
2843 DEC_STAT(&priv->fw_pend_stat);
2845 #ifdef CONFIG_IPW2100_DEBUG
2847 i = txq->oldest;
2848 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2849 &txq->drv[i],
2850 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2851 txq->drv[i].host_addr, txq->drv[i].buf_length);
2853 if (packet->type == DATA) {
2854 i = (i + 1) % txq->entries;
2856 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2857 &txq->drv[i],
2858 (u32) (txq->nic + i *
2859 sizeof(struct ipw2100_bd)),
2860 (u32) txq->drv[i].host_addr,
2861 txq->drv[i].buf_length);
2864 #endif
2866 switch (packet->type) {
2867 case DATA:
2868 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2869 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2870 "Expecting DATA TBD but pulled "
2871 "something else: ids %d=%d.\n",
2872 priv->net_dev->name, txq->oldest, packet->index);
2874 /* DATA packet; we have to unmap and free the SKB */
2875 for (i = 0; i < frag_num; i++) {
2876 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2878 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2879 (packet->index + 1 + i) % txq->entries,
2880 tbd->host_addr, tbd->buf_length);
2882 pci_unmap_single(priv->pci_dev,
2883 tbd->host_addr,
2884 tbd->buf_length, PCI_DMA_TODEVICE);
2887 libipw_txb_free(packet->info.d_struct.txb);
2888 packet->info.d_struct.txb = NULL;
2890 list_add_tail(element, &priv->tx_free_list);
2891 INC_STAT(&priv->tx_free_stat);
2893 /* We have a free slot in the Tx queue, so wake up the
2894 * transmit layer if it is stopped. */
2895 if (priv->status & STATUS_ASSOCIATED)
2896 netif_wake_queue(priv->net_dev);
2898 /* A packet was processed by the hardware, so update the
2899 * watchdog */
2900 priv->net_dev->trans_start = jiffies;
2902 break;
2904 case COMMAND:
2905 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2906 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2907 "Expecting COMMAND TBD but pulled "
2908 "something else: ids %d=%d.\n",
2909 priv->net_dev->name, txq->oldest, packet->index);
2911 #ifdef CONFIG_IPW2100_DEBUG
2912 if (packet->info.c_struct.cmd->host_command_reg <
2913 ARRAY_SIZE(command_types))
2914 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2915 command_types[packet->info.c_struct.cmd->
2916 host_command_reg],
2917 packet->info.c_struct.cmd->
2918 host_command_reg,
2919 packet->info.c_struct.cmd->cmd_status_reg);
2920 #endif
2922 list_add_tail(element, &priv->msg_free_list);
2923 INC_STAT(&priv->msg_free_stat);
2924 break;
2927 /* advance oldest used TBD pointer to start of next entry */
2928 txq->oldest = (e + 1) % txq->entries;
2929 /* increase available TBDs number */
2930 txq->available += descriptors_used;
2931 SET_STAT(&priv->txq_stat, txq->available);
2933 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2934 jiffies - packet->jiffy_start);
2936 return (!list_empty(&priv->fw_pend_list));
2939 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
2941 int i = 0;
2943 while (__ipw2100_tx_process(priv) && i < 200)
2944 i++;
2946 if (i == 200) {
2947 printk(KERN_WARNING DRV_NAME ": "
2948 "%s: Driver is running slow (%d iters).\n",
2949 priv->net_dev->name, i);
2953 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
2955 struct list_head *element;
2956 struct ipw2100_tx_packet *packet;
2957 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2958 struct ipw2100_bd *tbd;
2959 int next = txq->next;
2961 while (!list_empty(&priv->msg_pend_list)) {
2962 /* if there isn't enough space in TBD queue, then
2963 * don't stuff a new one in.
2964 * NOTE: 3 are needed as a command will take one,
2965 * and there is a minimum of 2 that must be
2966 * maintained between the r and w indexes
2968 if (txq->available <= 3) {
2969 IPW_DEBUG_TX("no room in tx_queue\n");
2970 break;
2973 element = priv->msg_pend_list.next;
2974 list_del(element);
2975 DEC_STAT(&priv->msg_pend_stat);
2977 packet = list_entry(element, struct ipw2100_tx_packet, list);
2979 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
2980 &txq->drv[txq->next],
2981 (void *)(txq->nic + txq->next *
2982 sizeof(struct ipw2100_bd)));
2984 packet->index = txq->next;
2986 tbd = &txq->drv[txq->next];
2988 /* initialize TBD */
2989 tbd->host_addr = packet->info.c_struct.cmd_phys;
2990 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
2991 /* not marking number of fragments causes problems
2992 * with f/w debug version */
2993 tbd->num_fragments = 1;
2994 tbd->status.info.field =
2995 IPW_BD_STATUS_TX_FRAME_COMMAND |
2996 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
2998 /* update TBD queue counters */
2999 txq->next++;
3000 txq->next %= txq->entries;
3001 txq->available--;
3002 DEC_STAT(&priv->txq_stat);
3004 list_add_tail(element, &priv->fw_pend_list);
3005 INC_STAT(&priv->fw_pend_stat);
3008 if (txq->next != next) {
3009 /* kick off the DMA by notifying firmware the
3010 * write index has moved; make sure TBD stores are sync'd */
3011 wmb();
3012 write_register(priv->net_dev,
3013 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3014 txq->next);
3019 * ipw2100_tx_send_data
3022 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
3024 struct list_head *element;
3025 struct ipw2100_tx_packet *packet;
3026 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3027 struct ipw2100_bd *tbd;
3028 int next = txq->next;
3029 int i = 0;
3030 struct ipw2100_data_header *ipw_hdr;
3031 struct libipw_hdr_3addr *hdr;
3033 while (!list_empty(&priv->tx_pend_list)) {
3034 /* if there isn't enough space in TBD queue, then
3035 * don't stuff a new one in.
3036 * NOTE: 4 are needed as a data will take two,
3037 * and there is a minimum of 2 that must be
3038 * maintained between the r and w indexes
3040 element = priv->tx_pend_list.next;
3041 packet = list_entry(element, struct ipw2100_tx_packet, list);
3043 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
3044 IPW_MAX_BDS)) {
3045 /* TODO: Support merging buffers if more than
3046 * IPW_MAX_BDS are used */
3047 IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
3048 "Increase fragmentation level.\n",
3049 priv->net_dev->name);
3052 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
3053 IPW_DEBUG_TX("no room in tx_queue\n");
3054 break;
3057 list_del(element);
3058 DEC_STAT(&priv->tx_pend_stat);
3060 tbd = &txq->drv[txq->next];
3062 packet->index = txq->next;
3064 ipw_hdr = packet->info.d_struct.data;
3065 hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb->
3066 fragments[0]->data;
3068 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
3069 /* To DS: Addr1 = BSSID, Addr2 = SA,
3070 Addr3 = DA */
3071 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3072 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3073 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3074 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3075 Addr3 = BSSID */
3076 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3077 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3080 ipw_hdr->host_command_reg = SEND;
3081 ipw_hdr->host_command_reg1 = 0;
3083 /* For now we only support host based encryption */
3084 ipw_hdr->needs_encryption = 0;
3085 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3086 if (packet->info.d_struct.txb->nr_frags > 1)
3087 ipw_hdr->fragment_size =
3088 packet->info.d_struct.txb->frag_size -
3089 LIBIPW_3ADDR_LEN;
3090 else
3091 ipw_hdr->fragment_size = 0;
3093 tbd->host_addr = packet->info.d_struct.data_phys;
3094 tbd->buf_length = sizeof(struct ipw2100_data_header);
3095 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3096 tbd->status.info.field =
3097 IPW_BD_STATUS_TX_FRAME_802_3 |
3098 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3099 txq->next++;
3100 txq->next %= txq->entries;
3102 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3103 packet->index, tbd->host_addr, tbd->buf_length);
3104 #ifdef CONFIG_IPW2100_DEBUG
3105 if (packet->info.d_struct.txb->nr_frags > 1)
3106 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3107 packet->info.d_struct.txb->nr_frags);
3108 #endif
3110 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3111 tbd = &txq->drv[txq->next];
3112 if (i == packet->info.d_struct.txb->nr_frags - 1)
3113 tbd->status.info.field =
3114 IPW_BD_STATUS_TX_FRAME_802_3 |
3115 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3116 else
3117 tbd->status.info.field =
3118 IPW_BD_STATUS_TX_FRAME_802_3 |
3119 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3121 tbd->buf_length = packet->info.d_struct.txb->
3122 fragments[i]->len - LIBIPW_3ADDR_LEN;
3124 tbd->host_addr = pci_map_single(priv->pci_dev,
3125 packet->info.d_struct.
3126 txb->fragments[i]->
3127 data +
3128 LIBIPW_3ADDR_LEN,
3129 tbd->buf_length,
3130 PCI_DMA_TODEVICE);
3132 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3133 txq->next, tbd->host_addr,
3134 tbd->buf_length);
3136 pci_dma_sync_single_for_device(priv->pci_dev,
3137 tbd->host_addr,
3138 tbd->buf_length,
3139 PCI_DMA_TODEVICE);
3141 txq->next++;
3142 txq->next %= txq->entries;
3145 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3146 SET_STAT(&priv->txq_stat, txq->available);
3148 list_add_tail(element, &priv->fw_pend_list);
3149 INC_STAT(&priv->fw_pend_stat);
3152 if (txq->next != next) {
3153 /* kick off the DMA by notifying firmware the
3154 * write index has moved; make sure TBD stores are sync'd */
3155 write_register(priv->net_dev,
3156 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3157 txq->next);
3159 return;
3162 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3164 struct net_device *dev = priv->net_dev;
3165 unsigned long flags;
3166 u32 inta, tmp;
3168 spin_lock_irqsave(&priv->low_lock, flags);
3169 ipw2100_disable_interrupts(priv);
3171 read_register(dev, IPW_REG_INTA, &inta);
3173 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3174 (unsigned long)inta & IPW_INTERRUPT_MASK);
3176 priv->in_isr++;
3177 priv->interrupts++;
3179 /* We do not loop and keep polling for more interrupts as this
3180 * is frowned upon and doesn't play nicely with other potentially
3181 * chained IRQs */
3182 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3183 (unsigned long)inta & IPW_INTERRUPT_MASK);
3185 if (inta & IPW2100_INTA_FATAL_ERROR) {
3186 printk(KERN_WARNING DRV_NAME
3187 ": Fatal interrupt. Scheduling firmware restart.\n");
3188 priv->inta_other++;
3189 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3191 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3192 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3193 priv->net_dev->name, priv->fatal_error);
3195 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3196 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3197 priv->net_dev->name, tmp);
3199 /* Wake up any sleeping jobs */
3200 schedule_reset(priv);
3203 if (inta & IPW2100_INTA_PARITY_ERROR) {
3204 printk(KERN_ERR DRV_NAME
3205 ": ***** PARITY ERROR INTERRUPT !!!! \n");
3206 priv->inta_other++;
3207 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3210 if (inta & IPW2100_INTA_RX_TRANSFER) {
3211 IPW_DEBUG_ISR("RX interrupt\n");
3213 priv->rx_interrupts++;
3215 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3217 __ipw2100_rx_process(priv);
3218 __ipw2100_tx_complete(priv);
3221 if (inta & IPW2100_INTA_TX_TRANSFER) {
3222 IPW_DEBUG_ISR("TX interrupt\n");
3224 priv->tx_interrupts++;
3226 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3228 __ipw2100_tx_complete(priv);
3229 ipw2100_tx_send_commands(priv);
3230 ipw2100_tx_send_data(priv);
3233 if (inta & IPW2100_INTA_TX_COMPLETE) {
3234 IPW_DEBUG_ISR("TX complete\n");
3235 priv->inta_other++;
3236 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3238 __ipw2100_tx_complete(priv);
3241 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3242 /* ipw2100_handle_event(dev); */
3243 priv->inta_other++;
3244 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3247 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3248 IPW_DEBUG_ISR("FW init done interrupt\n");
3249 priv->inta_other++;
3251 read_register(dev, IPW_REG_INTA, &tmp);
3252 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3253 IPW2100_INTA_PARITY_ERROR)) {
3254 write_register(dev, IPW_REG_INTA,
3255 IPW2100_INTA_FATAL_ERROR |
3256 IPW2100_INTA_PARITY_ERROR);
3259 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3262 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3263 IPW_DEBUG_ISR("Status change interrupt\n");
3264 priv->inta_other++;
3265 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3268 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3269 IPW_DEBUG_ISR("slave host mode interrupt\n");
3270 priv->inta_other++;
3271 write_register(dev, IPW_REG_INTA,
3272 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3275 priv->in_isr--;
3276 ipw2100_enable_interrupts(priv);
3278 spin_unlock_irqrestore(&priv->low_lock, flags);
3280 IPW_DEBUG_ISR("exit\n");
3283 static irqreturn_t ipw2100_interrupt(int irq, void *data)
3285 struct ipw2100_priv *priv = data;
3286 u32 inta, inta_mask;
3288 if (!data)
3289 return IRQ_NONE;
3291 spin_lock(&priv->low_lock);
3293 /* We check to see if we should be ignoring interrupts before
3294 * we touch the hardware. During ucode load if we try and handle
3295 * an interrupt we can cause keyboard problems as well as cause
3296 * the ucode to fail to initialize */
3297 if (!(priv->status & STATUS_INT_ENABLED)) {
3298 /* Shared IRQ */
3299 goto none;
3302 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3303 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3305 if (inta == 0xFFFFFFFF) {
3306 /* Hardware disappeared */
3307 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3308 goto none;
3311 inta &= IPW_INTERRUPT_MASK;
3313 if (!(inta & inta_mask)) {
3314 /* Shared interrupt */
3315 goto none;
3318 /* We disable the hardware interrupt here just to prevent unneeded
3319 * calls to be made. We disable this again within the actual
3320 * work tasklet, so if another part of the code re-enables the
3321 * interrupt, that is fine */
3322 ipw2100_disable_interrupts(priv);
3324 tasklet_schedule(&priv->irq_tasklet);
3325 spin_unlock(&priv->low_lock);
3327 return IRQ_HANDLED;
3328 none:
3329 spin_unlock(&priv->low_lock);
3330 return IRQ_NONE;
3333 static netdev_tx_t ipw2100_tx(struct libipw_txb *txb,
3334 struct net_device *dev, int pri)
3336 struct ipw2100_priv *priv = libipw_priv(dev);
3337 struct list_head *element;
3338 struct ipw2100_tx_packet *packet;
3339 unsigned long flags;
3341 spin_lock_irqsave(&priv->low_lock, flags);
3343 if (!(priv->status & STATUS_ASSOCIATED)) {
3344 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3345 priv->net_dev->stats.tx_carrier_errors++;
3346 netif_stop_queue(dev);
3347 goto fail_unlock;
3350 if (list_empty(&priv->tx_free_list))
3351 goto fail_unlock;
3353 element = priv->tx_free_list.next;
3354 packet = list_entry(element, struct ipw2100_tx_packet, list);
3356 packet->info.d_struct.txb = txb;
3358 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3359 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3361 packet->jiffy_start = jiffies;
3363 list_del(element);
3364 DEC_STAT(&priv->tx_free_stat);
3366 list_add_tail(element, &priv->tx_pend_list);
3367 INC_STAT(&priv->tx_pend_stat);
3369 ipw2100_tx_send_data(priv);
3371 spin_unlock_irqrestore(&priv->low_lock, flags);
3372 return NETDEV_TX_OK;
3374 fail_unlock:
3375 netif_stop_queue(dev);
3376 spin_unlock_irqrestore(&priv->low_lock, flags);
3377 return NETDEV_TX_BUSY;
3380 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3382 int i, j, err = -EINVAL;
3383 void *v;
3384 dma_addr_t p;
3386 priv->msg_buffers =
3387 (struct ipw2100_tx_packet *)kmalloc(IPW_COMMAND_POOL_SIZE *
3388 sizeof(struct
3389 ipw2100_tx_packet),
3390 GFP_KERNEL);
3391 if (!priv->msg_buffers) {
3392 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3393 "buffers.\n", priv->net_dev->name);
3394 return -ENOMEM;
3397 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3398 v = pci_alloc_consistent(priv->pci_dev,
3399 sizeof(struct ipw2100_cmd_header), &p);
3400 if (!v) {
3401 printk(KERN_ERR DRV_NAME ": "
3402 "%s: PCI alloc failed for msg "
3403 "buffers.\n", priv->net_dev->name);
3404 err = -ENOMEM;
3405 break;
3408 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3410 priv->msg_buffers[i].type = COMMAND;
3411 priv->msg_buffers[i].info.c_struct.cmd =
3412 (struct ipw2100_cmd_header *)v;
3413 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3416 if (i == IPW_COMMAND_POOL_SIZE)
3417 return 0;
3419 for (j = 0; j < i; j++) {
3420 pci_free_consistent(priv->pci_dev,
3421 sizeof(struct ipw2100_cmd_header),
3422 priv->msg_buffers[j].info.c_struct.cmd,
3423 priv->msg_buffers[j].info.c_struct.
3424 cmd_phys);
3427 kfree(priv->msg_buffers);
3428 priv->msg_buffers = NULL;
3430 return err;
3433 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3435 int i;
3437 INIT_LIST_HEAD(&priv->msg_free_list);
3438 INIT_LIST_HEAD(&priv->msg_pend_list);
3440 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3441 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3442 SET_STAT(&priv->msg_free_stat, i);
3444 return 0;
3447 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3449 int i;
3451 if (!priv->msg_buffers)
3452 return;
3454 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3455 pci_free_consistent(priv->pci_dev,
3456 sizeof(struct ipw2100_cmd_header),
3457 priv->msg_buffers[i].info.c_struct.cmd,
3458 priv->msg_buffers[i].info.c_struct.
3459 cmd_phys);
3462 kfree(priv->msg_buffers);
3463 priv->msg_buffers = NULL;
3466 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3467 char *buf)
3469 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3470 char *out = buf;
3471 int i, j;
3472 u32 val;
3474 for (i = 0; i < 16; i++) {
3475 out += sprintf(out, "[%08X] ", i * 16);
3476 for (j = 0; j < 16; j += 4) {
3477 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3478 out += sprintf(out, "%08X ", val);
3480 out += sprintf(out, "\n");
3483 return out - buf;
3486 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3488 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3489 char *buf)
3491 struct ipw2100_priv *p = dev_get_drvdata(d);
3492 return sprintf(buf, "0x%08x\n", (int)p->config);
3495 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3497 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3498 char *buf)
3500 struct ipw2100_priv *p = dev_get_drvdata(d);
3501 return sprintf(buf, "0x%08x\n", (int)p->status);
3504 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3506 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3507 char *buf)
3509 struct ipw2100_priv *p = dev_get_drvdata(d);
3510 return sprintf(buf, "0x%08x\n", (int)p->capability);
3513 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3515 #define IPW2100_REG(x) { IPW_ ##x, #x }
3516 static const struct {
3517 u32 addr;
3518 const char *name;
3519 } hw_data[] = {
3520 IPW2100_REG(REG_GP_CNTRL),
3521 IPW2100_REG(REG_GPIO),
3522 IPW2100_REG(REG_INTA),
3523 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3524 #define IPW2100_NIC(x, s) { x, #x, s }
3525 static const struct {
3526 u32 addr;
3527 const char *name;
3528 size_t size;
3529 } nic_data[] = {
3530 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3531 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3532 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3533 static const struct {
3534 u8 index;
3535 const char *name;
3536 const char *desc;
3537 } ord_data[] = {
3538 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3539 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3540 "successful Host Tx's (MSDU)"),
3541 IPW2100_ORD(STAT_TX_DIR_DATA,
3542 "successful Directed Tx's (MSDU)"),
3543 IPW2100_ORD(STAT_TX_DIR_DATA1,
3544 "successful Directed Tx's (MSDU) @ 1MB"),
3545 IPW2100_ORD(STAT_TX_DIR_DATA2,
3546 "successful Directed Tx's (MSDU) @ 2MB"),
3547 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3548 "successful Directed Tx's (MSDU) @ 5_5MB"),
3549 IPW2100_ORD(STAT_TX_DIR_DATA11,
3550 "successful Directed Tx's (MSDU) @ 11MB"),
3551 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3552 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3553 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3554 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3555 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3556 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3557 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3558 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3559 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3560 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3561 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3562 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3563 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3564 IPW2100_ORD(STAT_TX_ASSN_RESP,
3565 "successful Association response Tx's"),
3566 IPW2100_ORD(STAT_TX_REASSN,
3567 "successful Reassociation Tx's"),
3568 IPW2100_ORD(STAT_TX_REASSN_RESP,
3569 "successful Reassociation response Tx's"),
3570 IPW2100_ORD(STAT_TX_PROBE,
3571 "probes successfully transmitted"),
3572 IPW2100_ORD(STAT_TX_PROBE_RESP,
3573 "probe responses successfully transmitted"),
3574 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3575 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3576 IPW2100_ORD(STAT_TX_DISASSN,
3577 "successful Disassociation TX"),
3578 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3579 IPW2100_ORD(STAT_TX_DEAUTH,
3580 "successful Deauthentication TX"),
3581 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3582 "Total successful Tx data bytes"),
3583 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3584 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3585 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3586 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3587 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3588 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3589 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3590 "times max tries in a hop failed"),
3591 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3592 "times disassociation failed"),
3593 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3594 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3595 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3596 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3597 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3598 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3599 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3600 "directed packets at 5.5MB"),
3601 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3602 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3603 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3604 "nondirected packets at 1MB"),
3605 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3606 "nondirected packets at 2MB"),
3607 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3608 "nondirected packets at 5.5MB"),
3609 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3610 "nondirected packets at 11MB"),
3611 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3612 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3613 "Rx CTS"),
3614 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3615 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3616 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3617 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3618 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3619 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3620 IPW2100_ORD(STAT_RX_REASSN_RESP,
3621 "Reassociation response Rx's"),
3622 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3623 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3624 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3625 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3626 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3627 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3628 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3629 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3630 "Total rx data bytes received"),
3631 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3632 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3633 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3634 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3635 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3636 IPW2100_ORD(STAT_RX_DUPLICATE1,
3637 "duplicate rx packets at 1MB"),
3638 IPW2100_ORD(STAT_RX_DUPLICATE2,
3639 "duplicate rx packets at 2MB"),
3640 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3641 "duplicate rx packets at 5.5MB"),
3642 IPW2100_ORD(STAT_RX_DUPLICATE11,
3643 "duplicate rx packets at 11MB"),
3644 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3645 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3646 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3647 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3648 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3649 "rx frames with invalid protocol"),
3650 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3651 IPW2100_ORD(STAT_RX_NO_BUFFER,
3652 "rx frames rejected due to no buffer"),
3653 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3654 "rx frames dropped due to missing fragment"),
3655 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3656 "rx frames dropped due to non-sequential fragment"),
3657 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3658 "rx frames dropped due to unmatched 1st frame"),
3659 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3660 "rx frames dropped due to uncompleted frame"),
3661 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3662 "ICV errors during decryption"),
3663 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3664 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3665 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3666 "poll response timeouts"),
3667 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3668 "timeouts waiting for last {broad,multi}cast pkt"),
3669 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3670 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3671 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3672 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3673 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3674 "current calculation of % missed beacons"),
3675 IPW2100_ORD(STAT_PERCENT_RETRIES,
3676 "current calculation of % missed tx retries"),
3677 IPW2100_ORD(ASSOCIATED_AP_PTR,
3678 "0 if not associated, else pointer to AP table entry"),
3679 IPW2100_ORD(AVAILABLE_AP_CNT,
3680 "AP's decsribed in the AP table"),
3681 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3682 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3683 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3684 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3685 "failures due to response fail"),
3686 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3687 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3688 IPW2100_ORD(STAT_ROAM_INHIBIT,
3689 "times roaming was inhibited due to activity"),
3690 IPW2100_ORD(RSSI_AT_ASSN,
3691 "RSSI of associated AP at time of association"),
3692 IPW2100_ORD(STAT_ASSN_CAUSE1,
3693 "reassociation: no probe response or TX on hop"),
3694 IPW2100_ORD(STAT_ASSN_CAUSE2,
3695 "reassociation: poor tx/rx quality"),
3696 IPW2100_ORD(STAT_ASSN_CAUSE3,
3697 "reassociation: tx/rx quality (excessive AP load"),
3698 IPW2100_ORD(STAT_ASSN_CAUSE4,
3699 "reassociation: AP RSSI level"),
3700 IPW2100_ORD(STAT_ASSN_CAUSE5,
3701 "reassociations due to load leveling"),
3702 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3703 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3704 "times authentication response failed"),
3705 IPW2100_ORD(STATION_TABLE_CNT,
3706 "entries in association table"),
3707 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3708 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3709 IPW2100_ORD(COUNTRY_CODE,
3710 "IEEE country code as recv'd from beacon"),
3711 IPW2100_ORD(COUNTRY_CHANNELS,
3712 "channels suported by country"),
3713 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3714 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3715 IPW2100_ORD(ANTENNA_DIVERSITY,
3716 "TRUE if antenna diversity is disabled"),
3717 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3718 IPW2100_ORD(OUR_FREQ,
3719 "current radio freq lower digits - channel ID"),
3720 IPW2100_ORD(RTC_TIME, "current RTC time"),
3721 IPW2100_ORD(PORT_TYPE, "operating mode"),
3722 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3723 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3724 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3725 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3726 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3727 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3728 IPW2100_ORD(CAPABILITIES,
3729 "Management frame capability field"),
3730 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3731 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3732 IPW2100_ORD(RTS_THRESHOLD,
3733 "Min packet length for RTS handshaking"),
3734 IPW2100_ORD(INT_MODE, "International mode"),
3735 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3736 "protocol frag threshold"),
3737 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3738 "EEPROM offset in SRAM"),
3739 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3740 "EEPROM size in SRAM"),
3741 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3742 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3743 "EEPROM IBSS 11b channel set"),
3744 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3745 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3746 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3747 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3748 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3750 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3751 char *buf)
3753 int i;
3754 struct ipw2100_priv *priv = dev_get_drvdata(d);
3755 struct net_device *dev = priv->net_dev;
3756 char *out = buf;
3757 u32 val = 0;
3759 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3761 for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
3762 read_register(dev, hw_data[i].addr, &val);
3763 out += sprintf(out, "%30s [%08X] : %08X\n",
3764 hw_data[i].name, hw_data[i].addr, val);
3767 return out - buf;
3770 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3772 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3773 char *buf)
3775 struct ipw2100_priv *priv = dev_get_drvdata(d);
3776 struct net_device *dev = priv->net_dev;
3777 char *out = buf;
3778 int i;
3780 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3782 for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
3783 u8 tmp8;
3784 u16 tmp16;
3785 u32 tmp32;
3787 switch (nic_data[i].size) {
3788 case 1:
3789 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3790 out += sprintf(out, "%30s [%08X] : %02X\n",
3791 nic_data[i].name, nic_data[i].addr,
3792 tmp8);
3793 break;
3794 case 2:
3795 read_nic_word(dev, nic_data[i].addr, &tmp16);
3796 out += sprintf(out, "%30s [%08X] : %04X\n",
3797 nic_data[i].name, nic_data[i].addr,
3798 tmp16);
3799 break;
3800 case 4:
3801 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3802 out += sprintf(out, "%30s [%08X] : %08X\n",
3803 nic_data[i].name, nic_data[i].addr,
3804 tmp32);
3805 break;
3808 return out - buf;
3811 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3813 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3814 char *buf)
3816 struct ipw2100_priv *priv = dev_get_drvdata(d);
3817 struct net_device *dev = priv->net_dev;
3818 static unsigned long loop = 0;
3819 int len = 0;
3820 u32 buffer[4];
3821 int i;
3822 char line[81];
3824 if (loop >= 0x30000)
3825 loop = 0;
3827 /* sysfs provides us PAGE_SIZE buffer */
3828 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3830 if (priv->snapshot[0])
3831 for (i = 0; i < 4; i++)
3832 buffer[i] =
3833 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3834 else
3835 for (i = 0; i < 4; i++)
3836 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3838 if (priv->dump_raw)
3839 len += sprintf(buf + len,
3840 "%c%c%c%c"
3841 "%c%c%c%c"
3842 "%c%c%c%c"
3843 "%c%c%c%c",
3844 ((u8 *) buffer)[0x0],
3845 ((u8 *) buffer)[0x1],
3846 ((u8 *) buffer)[0x2],
3847 ((u8 *) buffer)[0x3],
3848 ((u8 *) buffer)[0x4],
3849 ((u8 *) buffer)[0x5],
3850 ((u8 *) buffer)[0x6],
3851 ((u8 *) buffer)[0x7],
3852 ((u8 *) buffer)[0x8],
3853 ((u8 *) buffer)[0x9],
3854 ((u8 *) buffer)[0xa],
3855 ((u8 *) buffer)[0xb],
3856 ((u8 *) buffer)[0xc],
3857 ((u8 *) buffer)[0xd],
3858 ((u8 *) buffer)[0xe],
3859 ((u8 *) buffer)[0xf]);
3860 else
3861 len += sprintf(buf + len, "%s\n",
3862 snprint_line(line, sizeof(line),
3863 (u8 *) buffer, 16, loop));
3864 loop += 16;
3867 return len;
3870 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3871 const char *buf, size_t count)
3873 struct ipw2100_priv *priv = dev_get_drvdata(d);
3874 struct net_device *dev = priv->net_dev;
3875 const char *p = buf;
3877 (void)dev; /* kill unused-var warning for debug-only code */
3879 if (count < 1)
3880 return count;
3882 if (p[0] == '1' ||
3883 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3884 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3885 dev->name);
3886 priv->dump_raw = 1;
3888 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3889 tolower(p[1]) == 'f')) {
3890 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3891 dev->name);
3892 priv->dump_raw = 0;
3894 } else if (tolower(p[0]) == 'r') {
3895 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3896 ipw2100_snapshot_free(priv);
3898 } else
3899 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3900 "reset = clear memory snapshot\n", dev->name);
3902 return count;
3905 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3907 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3908 char *buf)
3910 struct ipw2100_priv *priv = dev_get_drvdata(d);
3911 u32 val = 0;
3912 int len = 0;
3913 u32 val_len;
3914 static int loop = 0;
3916 if (priv->status & STATUS_RF_KILL_MASK)
3917 return 0;
3919 if (loop >= ARRAY_SIZE(ord_data))
3920 loop = 0;
3922 /* sysfs provides us PAGE_SIZE buffer */
3923 while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
3924 val_len = sizeof(u32);
3926 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
3927 &val_len))
3928 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
3929 ord_data[loop].index,
3930 ord_data[loop].desc);
3931 else
3932 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
3933 ord_data[loop].index, val,
3934 ord_data[loop].desc);
3935 loop++;
3938 return len;
3941 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
3943 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
3944 char *buf)
3946 struct ipw2100_priv *priv = dev_get_drvdata(d);
3947 char *out = buf;
3949 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
3950 priv->interrupts, priv->tx_interrupts,
3951 priv->rx_interrupts, priv->inta_other);
3952 out += sprintf(out, "firmware resets: %d\n", priv->resets);
3953 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
3954 #ifdef CONFIG_IPW2100_DEBUG
3955 out += sprintf(out, "packet mismatch image: %s\n",
3956 priv->snapshot[0] ? "YES" : "NO");
3957 #endif
3959 return out - buf;
3962 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
3964 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
3966 int err;
3968 if (mode == priv->ieee->iw_mode)
3969 return 0;
3971 err = ipw2100_disable_adapter(priv);
3972 if (err) {
3973 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
3974 priv->net_dev->name, err);
3975 return err;
3978 switch (mode) {
3979 case IW_MODE_INFRA:
3980 priv->net_dev->type = ARPHRD_ETHER;
3981 break;
3982 case IW_MODE_ADHOC:
3983 priv->net_dev->type = ARPHRD_ETHER;
3984 break;
3985 #ifdef CONFIG_IPW2100_MONITOR
3986 case IW_MODE_MONITOR:
3987 priv->last_mode = priv->ieee->iw_mode;
3988 priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
3989 break;
3990 #endif /* CONFIG_IPW2100_MONITOR */
3993 priv->ieee->iw_mode = mode;
3995 #ifdef CONFIG_PM
3996 /* Indicate ipw2100_download_firmware download firmware
3997 * from disk instead of memory. */
3998 ipw2100_firmware.version = 0;
3999 #endif
4001 printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
4002 priv->reset_backoff = 0;
4003 schedule_reset(priv);
4005 return 0;
4008 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
4009 char *buf)
4011 struct ipw2100_priv *priv = dev_get_drvdata(d);
4012 int len = 0;
4014 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4016 if (priv->status & STATUS_ASSOCIATED)
4017 len += sprintf(buf + len, "connected: %lu\n",
4018 get_seconds() - priv->connect_start);
4019 else
4020 len += sprintf(buf + len, "not connected\n");
4022 DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p");
4023 DUMP_VAR(status, "08lx");
4024 DUMP_VAR(config, "08lx");
4025 DUMP_VAR(capability, "08lx");
4027 len +=
4028 sprintf(buf + len, "last_rtc: %lu\n",
4029 (unsigned long)priv->last_rtc);
4031 DUMP_VAR(fatal_error, "d");
4032 DUMP_VAR(stop_hang_check, "d");
4033 DUMP_VAR(stop_rf_kill, "d");
4034 DUMP_VAR(messages_sent, "d");
4036 DUMP_VAR(tx_pend_stat.value, "d");
4037 DUMP_VAR(tx_pend_stat.hi, "d");
4039 DUMP_VAR(tx_free_stat.value, "d");
4040 DUMP_VAR(tx_free_stat.lo, "d");
4042 DUMP_VAR(msg_free_stat.value, "d");
4043 DUMP_VAR(msg_free_stat.lo, "d");
4045 DUMP_VAR(msg_pend_stat.value, "d");
4046 DUMP_VAR(msg_pend_stat.hi, "d");
4048 DUMP_VAR(fw_pend_stat.value, "d");
4049 DUMP_VAR(fw_pend_stat.hi, "d");
4051 DUMP_VAR(txq_stat.value, "d");
4052 DUMP_VAR(txq_stat.lo, "d");
4054 DUMP_VAR(ieee->scans, "d");
4055 DUMP_VAR(reset_backoff, "d");
4057 return len;
4060 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
4062 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
4063 char *buf)
4065 struct ipw2100_priv *priv = dev_get_drvdata(d);
4066 char essid[IW_ESSID_MAX_SIZE + 1];
4067 u8 bssid[ETH_ALEN];
4068 u32 chan = 0;
4069 char *out = buf;
4070 unsigned int length;
4071 int ret;
4073 if (priv->status & STATUS_RF_KILL_MASK)
4074 return 0;
4076 memset(essid, 0, sizeof(essid));
4077 memset(bssid, 0, sizeof(bssid));
4079 length = IW_ESSID_MAX_SIZE;
4080 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
4081 if (ret)
4082 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4083 __LINE__);
4085 length = sizeof(bssid);
4086 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
4087 bssid, &length);
4088 if (ret)
4089 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4090 __LINE__);
4092 length = sizeof(u32);
4093 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
4094 if (ret)
4095 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4096 __LINE__);
4098 out += sprintf(out, "ESSID: %s\n", essid);
4099 out += sprintf(out, "BSSID: %pM\n", bssid);
4100 out += sprintf(out, "Channel: %d\n", chan);
4102 return out - buf;
4105 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
4107 #ifdef CONFIG_IPW2100_DEBUG
4108 static ssize_t show_debug_level(struct device_driver *d, char *buf)
4110 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
4113 static ssize_t store_debug_level(struct device_driver *d,
4114 const char *buf, size_t count)
4116 char *p = (char *)buf;
4117 u32 val;
4119 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4120 p++;
4121 if (p[0] == 'x' || p[0] == 'X')
4122 p++;
4123 val = simple_strtoul(p, &p, 16);
4124 } else
4125 val = simple_strtoul(p, &p, 10);
4126 if (p == buf)
4127 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4128 else
4129 ipw2100_debug_level = val;
4131 return strnlen(buf, count);
4134 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4135 store_debug_level);
4136 #endif /* CONFIG_IPW2100_DEBUG */
4138 static ssize_t show_fatal_error(struct device *d,
4139 struct device_attribute *attr, char *buf)
4141 struct ipw2100_priv *priv = dev_get_drvdata(d);
4142 char *out = buf;
4143 int i;
4145 if (priv->fatal_error)
4146 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4147 else
4148 out += sprintf(out, "0\n");
4150 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4151 if (!priv->fatal_errors[(priv->fatal_index - i) %
4152 IPW2100_ERROR_QUEUE])
4153 continue;
4155 out += sprintf(out, "%d. 0x%08X\n", i,
4156 priv->fatal_errors[(priv->fatal_index - i) %
4157 IPW2100_ERROR_QUEUE]);
4160 return out - buf;
4163 static ssize_t store_fatal_error(struct device *d,
4164 struct device_attribute *attr, const char *buf,
4165 size_t count)
4167 struct ipw2100_priv *priv = dev_get_drvdata(d);
4168 schedule_reset(priv);
4169 return count;
4172 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4173 store_fatal_error);
4175 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4176 char *buf)
4178 struct ipw2100_priv *priv = dev_get_drvdata(d);
4179 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4182 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4183 const char *buf, size_t count)
4185 struct ipw2100_priv *priv = dev_get_drvdata(d);
4186 struct net_device *dev = priv->net_dev;
4187 char buffer[] = "00000000";
4188 unsigned long len =
4189 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4190 unsigned long val;
4191 char *p = buffer;
4193 (void)dev; /* kill unused-var warning for debug-only code */
4195 IPW_DEBUG_INFO("enter\n");
4197 strncpy(buffer, buf, len);
4198 buffer[len] = 0;
4200 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4201 p++;
4202 if (p[0] == 'x' || p[0] == 'X')
4203 p++;
4204 val = simple_strtoul(p, &p, 16);
4205 } else
4206 val = simple_strtoul(p, &p, 10);
4207 if (p == buffer) {
4208 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4209 } else {
4210 priv->ieee->scan_age = val;
4211 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4214 IPW_DEBUG_INFO("exit\n");
4215 return len;
4218 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4220 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4221 char *buf)
4223 /* 0 - RF kill not enabled
4224 1 - SW based RF kill active (sysfs)
4225 2 - HW based RF kill active
4226 3 - Both HW and SW baed RF kill active */
4227 struct ipw2100_priv *priv = dev_get_drvdata(d);
4228 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4229 (rf_kill_active(priv) ? 0x2 : 0x0);
4230 return sprintf(buf, "%i\n", val);
4233 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4235 if ((disable_radio ? 1 : 0) ==
4236 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4237 return 0;
4239 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4240 disable_radio ? "OFF" : "ON");
4242 mutex_lock(&priv->action_mutex);
4244 if (disable_radio) {
4245 priv->status |= STATUS_RF_KILL_SW;
4246 ipw2100_down(priv);
4247 } else {
4248 priv->status &= ~STATUS_RF_KILL_SW;
4249 if (rf_kill_active(priv)) {
4250 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4251 "disabled by HW switch\n");
4252 /* Make sure the RF_KILL check timer is running */
4253 priv->stop_rf_kill = 0;
4254 cancel_delayed_work(&priv->rf_kill);
4255 queue_delayed_work(priv->workqueue, &priv->rf_kill,
4256 round_jiffies_relative(HZ));
4257 } else
4258 schedule_reset(priv);
4261 mutex_unlock(&priv->action_mutex);
4262 return 1;
4265 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4266 const char *buf, size_t count)
4268 struct ipw2100_priv *priv = dev_get_drvdata(d);
4269 ipw_radio_kill_sw(priv, buf[0] == '1');
4270 return count;
4273 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4275 static struct attribute *ipw2100_sysfs_entries[] = {
4276 &dev_attr_hardware.attr,
4277 &dev_attr_registers.attr,
4278 &dev_attr_ordinals.attr,
4279 &dev_attr_pci.attr,
4280 &dev_attr_stats.attr,
4281 &dev_attr_internals.attr,
4282 &dev_attr_bssinfo.attr,
4283 &dev_attr_memory.attr,
4284 &dev_attr_scan_age.attr,
4285 &dev_attr_fatal_error.attr,
4286 &dev_attr_rf_kill.attr,
4287 &dev_attr_cfg.attr,
4288 &dev_attr_status.attr,
4289 &dev_attr_capability.attr,
4290 NULL,
4293 static struct attribute_group ipw2100_attribute_group = {
4294 .attrs = ipw2100_sysfs_entries,
4297 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4299 struct ipw2100_status_queue *q = &priv->status_queue;
4301 IPW_DEBUG_INFO("enter\n");
4303 q->size = entries * sizeof(struct ipw2100_status);
4304 q->drv =
4305 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4306 q->size, &q->nic);
4307 if (!q->drv) {
4308 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4309 return -ENOMEM;
4312 memset(q->drv, 0, q->size);
4314 IPW_DEBUG_INFO("exit\n");
4316 return 0;
4319 static void status_queue_free(struct ipw2100_priv *priv)
4321 IPW_DEBUG_INFO("enter\n");
4323 if (priv->status_queue.drv) {
4324 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4325 priv->status_queue.drv,
4326 priv->status_queue.nic);
4327 priv->status_queue.drv = NULL;
4330 IPW_DEBUG_INFO("exit\n");
4333 static int bd_queue_allocate(struct ipw2100_priv *priv,
4334 struct ipw2100_bd_queue *q, int entries)
4336 IPW_DEBUG_INFO("enter\n");
4338 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4340 q->entries = entries;
4341 q->size = entries * sizeof(struct ipw2100_bd);
4342 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4343 if (!q->drv) {
4344 IPW_DEBUG_INFO
4345 ("can't allocate shared memory for buffer descriptors\n");
4346 return -ENOMEM;
4348 memset(q->drv, 0, q->size);
4350 IPW_DEBUG_INFO("exit\n");
4352 return 0;
4355 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4357 IPW_DEBUG_INFO("enter\n");
4359 if (!q)
4360 return;
4362 if (q->drv) {
4363 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4364 q->drv = NULL;
4367 IPW_DEBUG_INFO("exit\n");
4370 static void bd_queue_initialize(struct ipw2100_priv *priv,
4371 struct ipw2100_bd_queue *q, u32 base, u32 size,
4372 u32 r, u32 w)
4374 IPW_DEBUG_INFO("enter\n");
4376 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4377 (u32) q->nic);
4379 write_register(priv->net_dev, base, q->nic);
4380 write_register(priv->net_dev, size, q->entries);
4381 write_register(priv->net_dev, r, q->oldest);
4382 write_register(priv->net_dev, w, q->next);
4384 IPW_DEBUG_INFO("exit\n");
4387 static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
4389 if (priv->workqueue) {
4390 priv->stop_rf_kill = 1;
4391 priv->stop_hang_check = 1;
4392 cancel_delayed_work(&priv->reset_work);
4393 cancel_delayed_work(&priv->security_work);
4394 cancel_delayed_work(&priv->wx_event_work);
4395 cancel_delayed_work(&priv->hang_check);
4396 cancel_delayed_work(&priv->rf_kill);
4397 cancel_delayed_work(&priv->scan_event_later);
4398 destroy_workqueue(priv->workqueue);
4399 priv->workqueue = NULL;
4403 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4405 int i, j, err = -EINVAL;
4406 void *v;
4407 dma_addr_t p;
4409 IPW_DEBUG_INFO("enter\n");
4411 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4412 if (err) {
4413 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4414 priv->net_dev->name);
4415 return err;
4418 priv->tx_buffers =
4419 (struct ipw2100_tx_packet *)kmalloc(TX_PENDED_QUEUE_LENGTH *
4420 sizeof(struct
4421 ipw2100_tx_packet),
4422 GFP_ATOMIC);
4423 if (!priv->tx_buffers) {
4424 printk(KERN_ERR DRV_NAME
4425 ": %s: alloc failed form tx buffers.\n",
4426 priv->net_dev->name);
4427 bd_queue_free(priv, &priv->tx_queue);
4428 return -ENOMEM;
4431 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4432 v = pci_alloc_consistent(priv->pci_dev,
4433 sizeof(struct ipw2100_data_header),
4434 &p);
4435 if (!v) {
4436 printk(KERN_ERR DRV_NAME
4437 ": %s: PCI alloc failed for tx " "buffers.\n",
4438 priv->net_dev->name);
4439 err = -ENOMEM;
4440 break;
4443 priv->tx_buffers[i].type = DATA;
4444 priv->tx_buffers[i].info.d_struct.data =
4445 (struct ipw2100_data_header *)v;
4446 priv->tx_buffers[i].info.d_struct.data_phys = p;
4447 priv->tx_buffers[i].info.d_struct.txb = NULL;
4450 if (i == TX_PENDED_QUEUE_LENGTH)
4451 return 0;
4453 for (j = 0; j < i; j++) {
4454 pci_free_consistent(priv->pci_dev,
4455 sizeof(struct ipw2100_data_header),
4456 priv->tx_buffers[j].info.d_struct.data,
4457 priv->tx_buffers[j].info.d_struct.
4458 data_phys);
4461 kfree(priv->tx_buffers);
4462 priv->tx_buffers = NULL;
4464 return err;
4467 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4469 int i;
4471 IPW_DEBUG_INFO("enter\n");
4474 * reinitialize packet info lists
4476 INIT_LIST_HEAD(&priv->fw_pend_list);
4477 INIT_STAT(&priv->fw_pend_stat);
4480 * reinitialize lists
4482 INIT_LIST_HEAD(&priv->tx_pend_list);
4483 INIT_LIST_HEAD(&priv->tx_free_list);
4484 INIT_STAT(&priv->tx_pend_stat);
4485 INIT_STAT(&priv->tx_free_stat);
4487 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4488 /* We simply drop any SKBs that have been queued for
4489 * transmit */
4490 if (priv->tx_buffers[i].info.d_struct.txb) {
4491 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4492 txb);
4493 priv->tx_buffers[i].info.d_struct.txb = NULL;
4496 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4499 SET_STAT(&priv->tx_free_stat, i);
4501 priv->tx_queue.oldest = 0;
4502 priv->tx_queue.available = priv->tx_queue.entries;
4503 priv->tx_queue.next = 0;
4504 INIT_STAT(&priv->txq_stat);
4505 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4507 bd_queue_initialize(priv, &priv->tx_queue,
4508 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4509 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4510 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4511 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4513 IPW_DEBUG_INFO("exit\n");
4517 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4519 int i;
4521 IPW_DEBUG_INFO("enter\n");
4523 bd_queue_free(priv, &priv->tx_queue);
4525 if (!priv->tx_buffers)
4526 return;
4528 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4529 if (priv->tx_buffers[i].info.d_struct.txb) {
4530 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4531 txb);
4532 priv->tx_buffers[i].info.d_struct.txb = NULL;
4534 if (priv->tx_buffers[i].info.d_struct.data)
4535 pci_free_consistent(priv->pci_dev,
4536 sizeof(struct ipw2100_data_header),
4537 priv->tx_buffers[i].info.d_struct.
4538 data,
4539 priv->tx_buffers[i].info.d_struct.
4540 data_phys);
4543 kfree(priv->tx_buffers);
4544 priv->tx_buffers = NULL;
4546 IPW_DEBUG_INFO("exit\n");
4549 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4551 int i, j, err = -EINVAL;
4553 IPW_DEBUG_INFO("enter\n");
4555 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4556 if (err) {
4557 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4558 return err;
4561 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4562 if (err) {
4563 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4564 bd_queue_free(priv, &priv->rx_queue);
4565 return err;
4569 * allocate packets
4571 priv->rx_buffers = (struct ipw2100_rx_packet *)
4572 kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
4573 GFP_KERNEL);
4574 if (!priv->rx_buffers) {
4575 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4577 bd_queue_free(priv, &priv->rx_queue);
4579 status_queue_free(priv);
4581 return -ENOMEM;
4584 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4585 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4587 err = ipw2100_alloc_skb(priv, packet);
4588 if (unlikely(err)) {
4589 err = -ENOMEM;
4590 break;
4593 /* The BD holds the cache aligned address */
4594 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4595 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4596 priv->status_queue.drv[i].status_fields = 0;
4599 if (i == RX_QUEUE_LENGTH)
4600 return 0;
4602 for (j = 0; j < i; j++) {
4603 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4604 sizeof(struct ipw2100_rx_packet),
4605 PCI_DMA_FROMDEVICE);
4606 dev_kfree_skb(priv->rx_buffers[j].skb);
4609 kfree(priv->rx_buffers);
4610 priv->rx_buffers = NULL;
4612 bd_queue_free(priv, &priv->rx_queue);
4614 status_queue_free(priv);
4616 return err;
4619 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4621 IPW_DEBUG_INFO("enter\n");
4623 priv->rx_queue.oldest = 0;
4624 priv->rx_queue.available = priv->rx_queue.entries - 1;
4625 priv->rx_queue.next = priv->rx_queue.entries - 1;
4627 INIT_STAT(&priv->rxq_stat);
4628 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4630 bd_queue_initialize(priv, &priv->rx_queue,
4631 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4632 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4633 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4634 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4636 /* set up the status queue */
4637 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4638 priv->status_queue.nic);
4640 IPW_DEBUG_INFO("exit\n");
4643 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4645 int i;
4647 IPW_DEBUG_INFO("enter\n");
4649 bd_queue_free(priv, &priv->rx_queue);
4650 status_queue_free(priv);
4652 if (!priv->rx_buffers)
4653 return;
4655 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4656 if (priv->rx_buffers[i].rxp) {
4657 pci_unmap_single(priv->pci_dev,
4658 priv->rx_buffers[i].dma_addr,
4659 sizeof(struct ipw2100_rx),
4660 PCI_DMA_FROMDEVICE);
4661 dev_kfree_skb(priv->rx_buffers[i].skb);
4665 kfree(priv->rx_buffers);
4666 priv->rx_buffers = NULL;
4668 IPW_DEBUG_INFO("exit\n");
4671 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4673 u32 length = ETH_ALEN;
4674 u8 addr[ETH_ALEN];
4676 int err;
4678 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length);
4679 if (err) {
4680 IPW_DEBUG_INFO("MAC address read failed\n");
4681 return -EIO;
4684 memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN);
4685 IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr);
4687 return 0;
4690 /********************************************************************
4692 * Firmware Commands
4694 ********************************************************************/
4696 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4698 struct host_command cmd = {
4699 .host_command = ADAPTER_ADDRESS,
4700 .host_command_sequence = 0,
4701 .host_command_length = ETH_ALEN
4703 int err;
4705 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4707 IPW_DEBUG_INFO("enter\n");
4709 if (priv->config & CFG_CUSTOM_MAC) {
4710 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4711 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4712 } else
4713 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4714 ETH_ALEN);
4716 err = ipw2100_hw_send_command(priv, &cmd);
4718 IPW_DEBUG_INFO("exit\n");
4719 return err;
4722 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4723 int batch_mode)
4725 struct host_command cmd = {
4726 .host_command = PORT_TYPE,
4727 .host_command_sequence = 0,
4728 .host_command_length = sizeof(u32)
4730 int err;
4732 switch (port_type) {
4733 case IW_MODE_INFRA:
4734 cmd.host_command_parameters[0] = IPW_BSS;
4735 break;
4736 case IW_MODE_ADHOC:
4737 cmd.host_command_parameters[0] = IPW_IBSS;
4738 break;
4741 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4742 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4744 if (!batch_mode) {
4745 err = ipw2100_disable_adapter(priv);
4746 if (err) {
4747 printk(KERN_ERR DRV_NAME
4748 ": %s: Could not disable adapter %d\n",
4749 priv->net_dev->name, err);
4750 return err;
4754 /* send cmd to firmware */
4755 err = ipw2100_hw_send_command(priv, &cmd);
4757 if (!batch_mode)
4758 ipw2100_enable_adapter(priv);
4760 return err;
4763 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4764 int batch_mode)
4766 struct host_command cmd = {
4767 .host_command = CHANNEL,
4768 .host_command_sequence = 0,
4769 .host_command_length = sizeof(u32)
4771 int err;
4773 cmd.host_command_parameters[0] = channel;
4775 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4777 /* If BSS then we don't support channel selection */
4778 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4779 return 0;
4781 if ((channel != 0) &&
4782 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4783 return -EINVAL;
4785 if (!batch_mode) {
4786 err = ipw2100_disable_adapter(priv);
4787 if (err)
4788 return err;
4791 err = ipw2100_hw_send_command(priv, &cmd);
4792 if (err) {
4793 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4794 return err;
4797 if (channel)
4798 priv->config |= CFG_STATIC_CHANNEL;
4799 else
4800 priv->config &= ~CFG_STATIC_CHANNEL;
4802 priv->channel = channel;
4804 if (!batch_mode) {
4805 err = ipw2100_enable_adapter(priv);
4806 if (err)
4807 return err;
4810 return 0;
4813 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4815 struct host_command cmd = {
4816 .host_command = SYSTEM_CONFIG,
4817 .host_command_sequence = 0,
4818 .host_command_length = 12,
4820 u32 ibss_mask, len = sizeof(u32);
4821 int err;
4823 /* Set system configuration */
4825 if (!batch_mode) {
4826 err = ipw2100_disable_adapter(priv);
4827 if (err)
4828 return err;
4831 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4832 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4834 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4835 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4837 if (!(priv->config & CFG_LONG_PREAMBLE))
4838 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4840 err = ipw2100_get_ordinal(priv,
4841 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4842 &ibss_mask, &len);
4843 if (err)
4844 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4846 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4847 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4849 /* 11b only */
4850 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4852 err = ipw2100_hw_send_command(priv, &cmd);
4853 if (err)
4854 return err;
4856 /* If IPv6 is configured in the kernel then we don't want to filter out all
4857 * of the multicast packets as IPv6 needs some. */
4858 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4859 cmd.host_command = ADD_MULTICAST;
4860 cmd.host_command_sequence = 0;
4861 cmd.host_command_length = 0;
4863 ipw2100_hw_send_command(priv, &cmd);
4864 #endif
4865 if (!batch_mode) {
4866 err = ipw2100_enable_adapter(priv);
4867 if (err)
4868 return err;
4871 return 0;
4874 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4875 int batch_mode)
4877 struct host_command cmd = {
4878 .host_command = BASIC_TX_RATES,
4879 .host_command_sequence = 0,
4880 .host_command_length = 4
4882 int err;
4884 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4886 if (!batch_mode) {
4887 err = ipw2100_disable_adapter(priv);
4888 if (err)
4889 return err;
4892 /* Set BASIC TX Rate first */
4893 ipw2100_hw_send_command(priv, &cmd);
4895 /* Set TX Rate */
4896 cmd.host_command = TX_RATES;
4897 ipw2100_hw_send_command(priv, &cmd);
4899 /* Set MSDU TX Rate */
4900 cmd.host_command = MSDU_TX_RATES;
4901 ipw2100_hw_send_command(priv, &cmd);
4903 if (!batch_mode) {
4904 err = ipw2100_enable_adapter(priv);
4905 if (err)
4906 return err;
4909 priv->tx_rates = rate;
4911 return 0;
4914 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4916 struct host_command cmd = {
4917 .host_command = POWER_MODE,
4918 .host_command_sequence = 0,
4919 .host_command_length = 4
4921 int err;
4923 cmd.host_command_parameters[0] = power_level;
4925 err = ipw2100_hw_send_command(priv, &cmd);
4926 if (err)
4927 return err;
4929 if (power_level == IPW_POWER_MODE_CAM)
4930 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
4931 else
4932 priv->power_mode = IPW_POWER_ENABLED | power_level;
4934 #ifdef IPW2100_TX_POWER
4935 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
4936 /* Set beacon interval */
4937 cmd.host_command = TX_POWER_INDEX;
4938 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
4940 err = ipw2100_hw_send_command(priv, &cmd);
4941 if (err)
4942 return err;
4944 #endif
4946 return 0;
4949 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
4951 struct host_command cmd = {
4952 .host_command = RTS_THRESHOLD,
4953 .host_command_sequence = 0,
4954 .host_command_length = 4
4956 int err;
4958 if (threshold & RTS_DISABLED)
4959 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
4960 else
4961 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
4963 err = ipw2100_hw_send_command(priv, &cmd);
4964 if (err)
4965 return err;
4967 priv->rts_threshold = threshold;
4969 return 0;
4972 #if 0
4973 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
4974 u32 threshold, int batch_mode)
4976 struct host_command cmd = {
4977 .host_command = FRAG_THRESHOLD,
4978 .host_command_sequence = 0,
4979 .host_command_length = 4,
4980 .host_command_parameters[0] = 0,
4982 int err;
4984 if (!batch_mode) {
4985 err = ipw2100_disable_adapter(priv);
4986 if (err)
4987 return err;
4990 if (threshold == 0)
4991 threshold = DEFAULT_FRAG_THRESHOLD;
4992 else {
4993 threshold = max(threshold, MIN_FRAG_THRESHOLD);
4994 threshold = min(threshold, MAX_FRAG_THRESHOLD);
4997 cmd.host_command_parameters[0] = threshold;
4999 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
5001 err = ipw2100_hw_send_command(priv, &cmd);
5003 if (!batch_mode)
5004 ipw2100_enable_adapter(priv);
5006 if (!err)
5007 priv->frag_threshold = threshold;
5009 return err;
5011 #endif
5013 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
5015 struct host_command cmd = {
5016 .host_command = SHORT_RETRY_LIMIT,
5017 .host_command_sequence = 0,
5018 .host_command_length = 4
5020 int err;
5022 cmd.host_command_parameters[0] = retry;
5024 err = ipw2100_hw_send_command(priv, &cmd);
5025 if (err)
5026 return err;
5028 priv->short_retry_limit = retry;
5030 return 0;
5033 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
5035 struct host_command cmd = {
5036 .host_command = LONG_RETRY_LIMIT,
5037 .host_command_sequence = 0,
5038 .host_command_length = 4
5040 int err;
5042 cmd.host_command_parameters[0] = retry;
5044 err = ipw2100_hw_send_command(priv, &cmd);
5045 if (err)
5046 return err;
5048 priv->long_retry_limit = retry;
5050 return 0;
5053 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
5054 int batch_mode)
5056 struct host_command cmd = {
5057 .host_command = MANDATORY_BSSID,
5058 .host_command_sequence = 0,
5059 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
5061 int err;
5063 #ifdef CONFIG_IPW2100_DEBUG
5064 if (bssid != NULL)
5065 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid);
5066 else
5067 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5068 #endif
5069 /* if BSSID is empty then we disable mandatory bssid mode */
5070 if (bssid != NULL)
5071 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
5073 if (!batch_mode) {
5074 err = ipw2100_disable_adapter(priv);
5075 if (err)
5076 return err;
5079 err = ipw2100_hw_send_command(priv, &cmd);
5081 if (!batch_mode)
5082 ipw2100_enable_adapter(priv);
5084 return err;
5087 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
5089 struct host_command cmd = {
5090 .host_command = DISASSOCIATION_BSSID,
5091 .host_command_sequence = 0,
5092 .host_command_length = ETH_ALEN
5094 int err;
5095 int len;
5097 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5099 len = ETH_ALEN;
5100 /* The Firmware currently ignores the BSSID and just disassociates from
5101 * the currently associated AP -- but in the off chance that a future
5102 * firmware does use the BSSID provided here, we go ahead and try and
5103 * set it to the currently associated AP's BSSID */
5104 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
5106 err = ipw2100_hw_send_command(priv, &cmd);
5108 return err;
5111 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5112 struct ipw2100_wpa_assoc_frame *, int)
5113 __attribute__ ((unused));
5115 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5116 struct ipw2100_wpa_assoc_frame *wpa_frame,
5117 int batch_mode)
5119 struct host_command cmd = {
5120 .host_command = SET_WPA_IE,
5121 .host_command_sequence = 0,
5122 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5124 int err;
5126 IPW_DEBUG_HC("SET_WPA_IE\n");
5128 if (!batch_mode) {
5129 err = ipw2100_disable_adapter(priv);
5130 if (err)
5131 return err;
5134 memcpy(cmd.host_command_parameters, wpa_frame,
5135 sizeof(struct ipw2100_wpa_assoc_frame));
5137 err = ipw2100_hw_send_command(priv, &cmd);
5139 if (!batch_mode) {
5140 if (ipw2100_enable_adapter(priv))
5141 err = -EIO;
5144 return err;
5147 struct security_info_params {
5148 u32 allowed_ciphers;
5149 u16 version;
5150 u8 auth_mode;
5151 u8 replay_counters_number;
5152 u8 unicast_using_group;
5153 } __attribute__ ((packed));
5155 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5156 int auth_mode,
5157 int security_level,
5158 int unicast_using_group,
5159 int batch_mode)
5161 struct host_command cmd = {
5162 .host_command = SET_SECURITY_INFORMATION,
5163 .host_command_sequence = 0,
5164 .host_command_length = sizeof(struct security_info_params)
5166 struct security_info_params *security =
5167 (struct security_info_params *)&cmd.host_command_parameters;
5168 int err;
5169 memset(security, 0, sizeof(*security));
5171 /* If shared key AP authentication is turned on, then we need to
5172 * configure the firmware to try and use it.
5174 * Actual data encryption/decryption is handled by the host. */
5175 security->auth_mode = auth_mode;
5176 security->unicast_using_group = unicast_using_group;
5178 switch (security_level) {
5179 default:
5180 case SEC_LEVEL_0:
5181 security->allowed_ciphers = IPW_NONE_CIPHER;
5182 break;
5183 case SEC_LEVEL_1:
5184 security->allowed_ciphers = IPW_WEP40_CIPHER |
5185 IPW_WEP104_CIPHER;
5186 break;
5187 case SEC_LEVEL_2:
5188 security->allowed_ciphers = IPW_WEP40_CIPHER |
5189 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5190 break;
5191 case SEC_LEVEL_2_CKIP:
5192 security->allowed_ciphers = IPW_WEP40_CIPHER |
5193 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5194 break;
5195 case SEC_LEVEL_3:
5196 security->allowed_ciphers = IPW_WEP40_CIPHER |
5197 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5198 break;
5201 IPW_DEBUG_HC
5202 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5203 security->auth_mode, security->allowed_ciphers, security_level);
5205 security->replay_counters_number = 0;
5207 if (!batch_mode) {
5208 err = ipw2100_disable_adapter(priv);
5209 if (err)
5210 return err;
5213 err = ipw2100_hw_send_command(priv, &cmd);
5215 if (!batch_mode)
5216 ipw2100_enable_adapter(priv);
5218 return err;
5221 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5223 struct host_command cmd = {
5224 .host_command = TX_POWER_INDEX,
5225 .host_command_sequence = 0,
5226 .host_command_length = 4
5228 int err = 0;
5229 u32 tmp = tx_power;
5231 if (tx_power != IPW_TX_POWER_DEFAULT)
5232 tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5233 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5235 cmd.host_command_parameters[0] = tmp;
5237 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5238 err = ipw2100_hw_send_command(priv, &cmd);
5239 if (!err)
5240 priv->tx_power = tx_power;
5242 return 0;
5245 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5246 u32 interval, int batch_mode)
5248 struct host_command cmd = {
5249 .host_command = BEACON_INTERVAL,
5250 .host_command_sequence = 0,
5251 .host_command_length = 4
5253 int err;
5255 cmd.host_command_parameters[0] = interval;
5257 IPW_DEBUG_INFO("enter\n");
5259 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5260 if (!batch_mode) {
5261 err = ipw2100_disable_adapter(priv);
5262 if (err)
5263 return err;
5266 ipw2100_hw_send_command(priv, &cmd);
5268 if (!batch_mode) {
5269 err = ipw2100_enable_adapter(priv);
5270 if (err)
5271 return err;
5275 IPW_DEBUG_INFO("exit\n");
5277 return 0;
5280 static void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5282 ipw2100_tx_initialize(priv);
5283 ipw2100_rx_initialize(priv);
5284 ipw2100_msg_initialize(priv);
5287 static void ipw2100_queues_free(struct ipw2100_priv *priv)
5289 ipw2100_tx_free(priv);
5290 ipw2100_rx_free(priv);
5291 ipw2100_msg_free(priv);
5294 static int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5296 if (ipw2100_tx_allocate(priv) ||
5297 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5298 goto fail;
5300 return 0;
5302 fail:
5303 ipw2100_tx_free(priv);
5304 ipw2100_rx_free(priv);
5305 ipw2100_msg_free(priv);
5306 return -ENOMEM;
5309 #define IPW_PRIVACY_CAPABLE 0x0008
5311 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5312 int batch_mode)
5314 struct host_command cmd = {
5315 .host_command = WEP_FLAGS,
5316 .host_command_sequence = 0,
5317 .host_command_length = 4
5319 int err;
5321 cmd.host_command_parameters[0] = flags;
5323 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5325 if (!batch_mode) {
5326 err = ipw2100_disable_adapter(priv);
5327 if (err) {
5328 printk(KERN_ERR DRV_NAME
5329 ": %s: Could not disable adapter %d\n",
5330 priv->net_dev->name, err);
5331 return err;
5335 /* send cmd to firmware */
5336 err = ipw2100_hw_send_command(priv, &cmd);
5338 if (!batch_mode)
5339 ipw2100_enable_adapter(priv);
5341 return err;
5344 struct ipw2100_wep_key {
5345 u8 idx;
5346 u8 len;
5347 u8 key[13];
5350 /* Macros to ease up priting WEP keys */
5351 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5352 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5353 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5354 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5357 * Set a the wep key
5359 * @priv: struct to work on
5360 * @idx: index of the key we want to set
5361 * @key: ptr to the key data to set
5362 * @len: length of the buffer at @key
5363 * @batch_mode: FIXME perform the operation in batch mode, not
5364 * disabling the device.
5366 * @returns 0 if OK, < 0 errno code on error.
5368 * Fill out a command structure with the new wep key, length an
5369 * index and send it down the wire.
5371 static int ipw2100_set_key(struct ipw2100_priv *priv,
5372 int idx, char *key, int len, int batch_mode)
5374 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5375 struct host_command cmd = {
5376 .host_command = WEP_KEY_INFO,
5377 .host_command_sequence = 0,
5378 .host_command_length = sizeof(struct ipw2100_wep_key),
5380 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5381 int err;
5383 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5384 idx, keylen, len);
5386 /* NOTE: We don't check cached values in case the firmware was reset
5387 * or some other problem is occurring. If the user is setting the key,
5388 * then we push the change */
5390 wep_key->idx = idx;
5391 wep_key->len = keylen;
5393 if (keylen) {
5394 memcpy(wep_key->key, key, len);
5395 memset(wep_key->key + len, 0, keylen - len);
5398 /* Will be optimized out on debug not being configured in */
5399 if (keylen == 0)
5400 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5401 priv->net_dev->name, wep_key->idx);
5402 else if (keylen == 5)
5403 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5404 priv->net_dev->name, wep_key->idx, wep_key->len,
5405 WEP_STR_64(wep_key->key));
5406 else
5407 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5408 "\n",
5409 priv->net_dev->name, wep_key->idx, wep_key->len,
5410 WEP_STR_128(wep_key->key));
5412 if (!batch_mode) {
5413 err = ipw2100_disable_adapter(priv);
5414 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5415 if (err) {
5416 printk(KERN_ERR DRV_NAME
5417 ": %s: Could not disable adapter %d\n",
5418 priv->net_dev->name, err);
5419 return err;
5423 /* send cmd to firmware */
5424 err = ipw2100_hw_send_command(priv, &cmd);
5426 if (!batch_mode) {
5427 int err2 = ipw2100_enable_adapter(priv);
5428 if (err == 0)
5429 err = err2;
5431 return err;
5434 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5435 int idx, int batch_mode)
5437 struct host_command cmd = {
5438 .host_command = WEP_KEY_INDEX,
5439 .host_command_sequence = 0,
5440 .host_command_length = 4,
5441 .host_command_parameters = {idx},
5443 int err;
5445 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5447 if (idx < 0 || idx > 3)
5448 return -EINVAL;
5450 if (!batch_mode) {
5451 err = ipw2100_disable_adapter(priv);
5452 if (err) {
5453 printk(KERN_ERR DRV_NAME
5454 ": %s: Could not disable adapter %d\n",
5455 priv->net_dev->name, err);
5456 return err;
5460 /* send cmd to firmware */
5461 err = ipw2100_hw_send_command(priv, &cmd);
5463 if (!batch_mode)
5464 ipw2100_enable_adapter(priv);
5466 return err;
5469 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5471 int i, err, auth_mode, sec_level, use_group;
5473 if (!(priv->status & STATUS_RUNNING))
5474 return 0;
5476 if (!batch_mode) {
5477 err = ipw2100_disable_adapter(priv);
5478 if (err)
5479 return err;
5482 if (!priv->ieee->sec.enabled) {
5483 err =
5484 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5485 SEC_LEVEL_0, 0, 1);
5486 } else {
5487 auth_mode = IPW_AUTH_OPEN;
5488 if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
5489 if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
5490 auth_mode = IPW_AUTH_SHARED;
5491 else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
5492 auth_mode = IPW_AUTH_LEAP_CISCO_ID;
5495 sec_level = SEC_LEVEL_0;
5496 if (priv->ieee->sec.flags & SEC_LEVEL)
5497 sec_level = priv->ieee->sec.level;
5499 use_group = 0;
5500 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5501 use_group = priv->ieee->sec.unicast_uses_group;
5503 err =
5504 ipw2100_set_security_information(priv, auth_mode, sec_level,
5505 use_group, 1);
5508 if (err)
5509 goto exit;
5511 if (priv->ieee->sec.enabled) {
5512 for (i = 0; i < 4; i++) {
5513 if (!(priv->ieee->sec.flags & (1 << i))) {
5514 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5515 priv->ieee->sec.key_sizes[i] = 0;
5516 } else {
5517 err = ipw2100_set_key(priv, i,
5518 priv->ieee->sec.keys[i],
5519 priv->ieee->sec.
5520 key_sizes[i], 1);
5521 if (err)
5522 goto exit;
5526 ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1);
5529 /* Always enable privacy so the Host can filter WEP packets if
5530 * encrypted data is sent up */
5531 err =
5532 ipw2100_set_wep_flags(priv,
5533 priv->ieee->sec.
5534 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5535 if (err)
5536 goto exit;
5538 priv->status &= ~STATUS_SECURITY_UPDATED;
5540 exit:
5541 if (!batch_mode)
5542 ipw2100_enable_adapter(priv);
5544 return err;
5547 static void ipw2100_security_work(struct work_struct *work)
5549 struct ipw2100_priv *priv =
5550 container_of(work, struct ipw2100_priv, security_work.work);
5552 /* If we happen to have reconnected before we get a chance to
5553 * process this, then update the security settings--which causes
5554 * a disassociation to occur */
5555 if (!(priv->status & STATUS_ASSOCIATED) &&
5556 priv->status & STATUS_SECURITY_UPDATED)
5557 ipw2100_configure_security(priv, 0);
5560 static void shim__set_security(struct net_device *dev,
5561 struct libipw_security *sec)
5563 struct ipw2100_priv *priv = libipw_priv(dev);
5564 int i, force_update = 0;
5566 mutex_lock(&priv->action_mutex);
5567 if (!(priv->status & STATUS_INITIALIZED))
5568 goto done;
5570 for (i = 0; i < 4; i++) {
5571 if (sec->flags & (1 << i)) {
5572 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5573 if (sec->key_sizes[i] == 0)
5574 priv->ieee->sec.flags &= ~(1 << i);
5575 else
5576 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5577 sec->key_sizes[i]);
5578 if (sec->level == SEC_LEVEL_1) {
5579 priv->ieee->sec.flags |= (1 << i);
5580 priv->status |= STATUS_SECURITY_UPDATED;
5581 } else
5582 priv->ieee->sec.flags &= ~(1 << i);
5586 if ((sec->flags & SEC_ACTIVE_KEY) &&
5587 priv->ieee->sec.active_key != sec->active_key) {
5588 if (sec->active_key <= 3) {
5589 priv->ieee->sec.active_key = sec->active_key;
5590 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5591 } else
5592 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5594 priv->status |= STATUS_SECURITY_UPDATED;
5597 if ((sec->flags & SEC_AUTH_MODE) &&
5598 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5599 priv->ieee->sec.auth_mode = sec->auth_mode;
5600 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5601 priv->status |= STATUS_SECURITY_UPDATED;
5604 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5605 priv->ieee->sec.flags |= SEC_ENABLED;
5606 priv->ieee->sec.enabled = sec->enabled;
5607 priv->status |= STATUS_SECURITY_UPDATED;
5608 force_update = 1;
5611 if (sec->flags & SEC_ENCRYPT)
5612 priv->ieee->sec.encrypt = sec->encrypt;
5614 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5615 priv->ieee->sec.level = sec->level;
5616 priv->ieee->sec.flags |= SEC_LEVEL;
5617 priv->status |= STATUS_SECURITY_UPDATED;
5620 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5621 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5622 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5623 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5624 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5625 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5626 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5627 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5628 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5629 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5631 /* As a temporary work around to enable WPA until we figure out why
5632 * wpa_supplicant toggles the security capability of the driver, which
5633 * forces a disassocation with force_update...
5635 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5636 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5637 ipw2100_configure_security(priv, 0);
5638 done:
5639 mutex_unlock(&priv->action_mutex);
5642 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5644 int err;
5645 int batch_mode = 1;
5646 u8 *bssid;
5648 IPW_DEBUG_INFO("enter\n");
5650 err = ipw2100_disable_adapter(priv);
5651 if (err)
5652 return err;
5653 #ifdef CONFIG_IPW2100_MONITOR
5654 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5655 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5656 if (err)
5657 return err;
5659 IPW_DEBUG_INFO("exit\n");
5661 return 0;
5663 #endif /* CONFIG_IPW2100_MONITOR */
5665 err = ipw2100_read_mac_address(priv);
5666 if (err)
5667 return -EIO;
5669 err = ipw2100_set_mac_address(priv, batch_mode);
5670 if (err)
5671 return err;
5673 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5674 if (err)
5675 return err;
5677 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5678 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5679 if (err)
5680 return err;
5683 err = ipw2100_system_config(priv, batch_mode);
5684 if (err)
5685 return err;
5687 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5688 if (err)
5689 return err;
5691 /* Default to power mode OFF */
5692 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5693 if (err)
5694 return err;
5696 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5697 if (err)
5698 return err;
5700 if (priv->config & CFG_STATIC_BSSID)
5701 bssid = priv->bssid;
5702 else
5703 bssid = NULL;
5704 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5705 if (err)
5706 return err;
5708 if (priv->config & CFG_STATIC_ESSID)
5709 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5710 batch_mode);
5711 else
5712 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5713 if (err)
5714 return err;
5716 err = ipw2100_configure_security(priv, batch_mode);
5717 if (err)
5718 return err;
5720 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5721 err =
5722 ipw2100_set_ibss_beacon_interval(priv,
5723 priv->beacon_interval,
5724 batch_mode);
5725 if (err)
5726 return err;
5728 err = ipw2100_set_tx_power(priv, priv->tx_power);
5729 if (err)
5730 return err;
5734 err = ipw2100_set_fragmentation_threshold(
5735 priv, priv->frag_threshold, batch_mode);
5736 if (err)
5737 return err;
5740 IPW_DEBUG_INFO("exit\n");
5742 return 0;
5745 /*************************************************************************
5747 * EXTERNALLY CALLED METHODS
5749 *************************************************************************/
5751 /* This method is called by the network layer -- not to be confused with
5752 * ipw2100_set_mac_address() declared above called by this driver (and this
5753 * method as well) to talk to the firmware */
5754 static int ipw2100_set_address(struct net_device *dev, void *p)
5756 struct ipw2100_priv *priv = libipw_priv(dev);
5757 struct sockaddr *addr = p;
5758 int err = 0;
5760 if (!is_valid_ether_addr(addr->sa_data))
5761 return -EADDRNOTAVAIL;
5763 mutex_lock(&priv->action_mutex);
5765 priv->config |= CFG_CUSTOM_MAC;
5766 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5768 err = ipw2100_set_mac_address(priv, 0);
5769 if (err)
5770 goto done;
5772 priv->reset_backoff = 0;
5773 mutex_unlock(&priv->action_mutex);
5774 ipw2100_reset_adapter(&priv->reset_work.work);
5775 return 0;
5777 done:
5778 mutex_unlock(&priv->action_mutex);
5779 return err;
5782 static int ipw2100_open(struct net_device *dev)
5784 struct ipw2100_priv *priv = libipw_priv(dev);
5785 unsigned long flags;
5786 IPW_DEBUG_INFO("dev->open\n");
5788 spin_lock_irqsave(&priv->low_lock, flags);
5789 if (priv->status & STATUS_ASSOCIATED) {
5790 netif_carrier_on(dev);
5791 netif_start_queue(dev);
5793 spin_unlock_irqrestore(&priv->low_lock, flags);
5795 return 0;
5798 static int ipw2100_close(struct net_device *dev)
5800 struct ipw2100_priv *priv = libipw_priv(dev);
5801 unsigned long flags;
5802 struct list_head *element;
5803 struct ipw2100_tx_packet *packet;
5805 IPW_DEBUG_INFO("enter\n");
5807 spin_lock_irqsave(&priv->low_lock, flags);
5809 if (priv->status & STATUS_ASSOCIATED)
5810 netif_carrier_off(dev);
5811 netif_stop_queue(dev);
5813 /* Flush the TX queue ... */
5814 while (!list_empty(&priv->tx_pend_list)) {
5815 element = priv->tx_pend_list.next;
5816 packet = list_entry(element, struct ipw2100_tx_packet, list);
5818 list_del(element);
5819 DEC_STAT(&priv->tx_pend_stat);
5821 libipw_txb_free(packet->info.d_struct.txb);
5822 packet->info.d_struct.txb = NULL;
5824 list_add_tail(element, &priv->tx_free_list);
5825 INC_STAT(&priv->tx_free_stat);
5827 spin_unlock_irqrestore(&priv->low_lock, flags);
5829 IPW_DEBUG_INFO("exit\n");
5831 return 0;
5835 * TODO: Fix this function... its just wrong
5837 static void ipw2100_tx_timeout(struct net_device *dev)
5839 struct ipw2100_priv *priv = libipw_priv(dev);
5841 dev->stats.tx_errors++;
5843 #ifdef CONFIG_IPW2100_MONITOR
5844 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5845 return;
5846 #endif
5848 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5849 dev->name);
5850 schedule_reset(priv);
5853 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5855 /* This is called when wpa_supplicant loads and closes the driver
5856 * interface. */
5857 priv->ieee->wpa_enabled = value;
5858 return 0;
5861 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5864 struct libipw_device *ieee = priv->ieee;
5865 struct libipw_security sec = {
5866 .flags = SEC_AUTH_MODE,
5868 int ret = 0;
5870 if (value & IW_AUTH_ALG_SHARED_KEY) {
5871 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5872 ieee->open_wep = 0;
5873 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5874 sec.auth_mode = WLAN_AUTH_OPEN;
5875 ieee->open_wep = 1;
5876 } else if (value & IW_AUTH_ALG_LEAP) {
5877 sec.auth_mode = WLAN_AUTH_LEAP;
5878 ieee->open_wep = 1;
5879 } else
5880 return -EINVAL;
5882 if (ieee->set_security)
5883 ieee->set_security(ieee->dev, &sec);
5884 else
5885 ret = -EOPNOTSUPP;
5887 return ret;
5890 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5891 char *wpa_ie, int wpa_ie_len)
5894 struct ipw2100_wpa_assoc_frame frame;
5896 frame.fixed_ie_mask = 0;
5898 /* copy WPA IE */
5899 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5900 frame.var_ie_len = wpa_ie_len;
5902 /* make sure WPA is enabled */
5903 ipw2100_wpa_enable(priv, 1);
5904 ipw2100_set_wpa_ie(priv, &frame, 0);
5907 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
5908 struct ethtool_drvinfo *info)
5910 struct ipw2100_priv *priv = libipw_priv(dev);
5911 char fw_ver[64], ucode_ver[64];
5913 strcpy(info->driver, DRV_NAME);
5914 strcpy(info->version, DRV_VERSION);
5916 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
5917 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
5919 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
5920 fw_ver, priv->eeprom_version, ucode_ver);
5922 strcpy(info->bus_info, pci_name(priv->pci_dev));
5925 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
5927 struct ipw2100_priv *priv = libipw_priv(dev);
5928 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
5931 static const struct ethtool_ops ipw2100_ethtool_ops = {
5932 .get_link = ipw2100_ethtool_get_link,
5933 .get_drvinfo = ipw_ethtool_get_drvinfo,
5936 static void ipw2100_hang_check(struct work_struct *work)
5938 struct ipw2100_priv *priv =
5939 container_of(work, struct ipw2100_priv, hang_check.work);
5940 unsigned long flags;
5941 u32 rtc = 0xa5a5a5a5;
5942 u32 len = sizeof(rtc);
5943 int restart = 0;
5945 spin_lock_irqsave(&priv->low_lock, flags);
5947 if (priv->fatal_error != 0) {
5948 /* If fatal_error is set then we need to restart */
5949 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5950 priv->net_dev->name);
5952 restart = 1;
5953 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
5954 (rtc == priv->last_rtc)) {
5955 /* Check if firmware is hung */
5956 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5957 priv->net_dev->name);
5959 restart = 1;
5962 if (restart) {
5963 /* Kill timer */
5964 priv->stop_hang_check = 1;
5965 priv->hangs++;
5967 /* Restart the NIC */
5968 schedule_reset(priv);
5971 priv->last_rtc = rtc;
5973 if (!priv->stop_hang_check)
5974 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
5976 spin_unlock_irqrestore(&priv->low_lock, flags);
5979 static void ipw2100_rf_kill(struct work_struct *work)
5981 struct ipw2100_priv *priv =
5982 container_of(work, struct ipw2100_priv, rf_kill.work);
5983 unsigned long flags;
5985 spin_lock_irqsave(&priv->low_lock, flags);
5987 if (rf_kill_active(priv)) {
5988 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
5989 if (!priv->stop_rf_kill)
5990 queue_delayed_work(priv->workqueue, &priv->rf_kill,
5991 round_jiffies_relative(HZ));
5992 goto exit_unlock;
5995 /* RF Kill is now disabled, so bring the device back up */
5997 if (!(priv->status & STATUS_RF_KILL_MASK)) {
5998 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
5999 "device\n");
6000 schedule_reset(priv);
6001 } else
6002 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6003 "enabled\n");
6005 exit_unlock:
6006 spin_unlock_irqrestore(&priv->low_lock, flags);
6009 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
6011 static const struct net_device_ops ipw2100_netdev_ops = {
6012 .ndo_open = ipw2100_open,
6013 .ndo_stop = ipw2100_close,
6014 .ndo_start_xmit = libipw_xmit,
6015 .ndo_change_mtu = libipw_change_mtu,
6016 .ndo_init = ipw2100_net_init,
6017 .ndo_tx_timeout = ipw2100_tx_timeout,
6018 .ndo_set_mac_address = ipw2100_set_address,
6019 .ndo_validate_addr = eth_validate_addr,
6022 /* Look into using netdev destructor to shutdown ieee80211? */
6024 static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
6025 void __iomem * base_addr,
6026 unsigned long mem_start,
6027 unsigned long mem_len)
6029 struct ipw2100_priv *priv;
6030 struct net_device *dev;
6032 dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
6033 if (!dev)
6034 return NULL;
6035 priv = libipw_priv(dev);
6036 priv->ieee = netdev_priv(dev);
6037 priv->pci_dev = pci_dev;
6038 priv->net_dev = dev;
6040 priv->ieee->hard_start_xmit = ipw2100_tx;
6041 priv->ieee->set_security = shim__set_security;
6043 priv->ieee->perfect_rssi = -20;
6044 priv->ieee->worst_rssi = -85;
6046 dev->netdev_ops = &ipw2100_netdev_ops;
6047 dev->ethtool_ops = &ipw2100_ethtool_ops;
6048 dev->wireless_handlers = &ipw2100_wx_handler_def;
6049 priv->wireless_data.libipw = priv->ieee;
6050 dev->wireless_data = &priv->wireless_data;
6051 dev->watchdog_timeo = 3 * HZ;
6052 dev->irq = 0;
6054 dev->base_addr = (unsigned long)base_addr;
6055 dev->mem_start = mem_start;
6056 dev->mem_end = dev->mem_start + mem_len - 1;
6058 /* NOTE: We don't use the wireless_handlers hook
6059 * in dev as the system will start throwing WX requests
6060 * to us before we're actually initialized and it just
6061 * ends up causing problems. So, we just handle
6062 * the WX extensions through the ipw2100_ioctl interface */
6064 /* memset() puts everything to 0, so we only have explicitly set
6065 * those values that need to be something else */
6067 /* If power management is turned on, default to AUTO mode */
6068 priv->power_mode = IPW_POWER_AUTO;
6070 #ifdef CONFIG_IPW2100_MONITOR
6071 priv->config |= CFG_CRC_CHECK;
6072 #endif
6073 priv->ieee->wpa_enabled = 0;
6074 priv->ieee->drop_unencrypted = 0;
6075 priv->ieee->privacy_invoked = 0;
6076 priv->ieee->ieee802_1x = 1;
6078 /* Set module parameters */
6079 switch (network_mode) {
6080 case 1:
6081 priv->ieee->iw_mode = IW_MODE_ADHOC;
6082 break;
6083 #ifdef CONFIG_IPW2100_MONITOR
6084 case 2:
6085 priv->ieee->iw_mode = IW_MODE_MONITOR;
6086 break;
6087 #endif
6088 default:
6089 case 0:
6090 priv->ieee->iw_mode = IW_MODE_INFRA;
6091 break;
6094 if (disable == 1)
6095 priv->status |= STATUS_RF_KILL_SW;
6097 if (channel != 0 &&
6098 ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
6099 priv->config |= CFG_STATIC_CHANNEL;
6100 priv->channel = channel;
6103 if (associate)
6104 priv->config |= CFG_ASSOCIATE;
6106 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6107 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6108 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6109 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6110 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6111 priv->tx_power = IPW_TX_POWER_DEFAULT;
6112 priv->tx_rates = DEFAULT_TX_RATES;
6114 strcpy(priv->nick, "ipw2100");
6116 spin_lock_init(&priv->low_lock);
6117 mutex_init(&priv->action_mutex);
6118 mutex_init(&priv->adapter_mutex);
6120 init_waitqueue_head(&priv->wait_command_queue);
6122 netif_carrier_off(dev);
6124 INIT_LIST_HEAD(&priv->msg_free_list);
6125 INIT_LIST_HEAD(&priv->msg_pend_list);
6126 INIT_STAT(&priv->msg_free_stat);
6127 INIT_STAT(&priv->msg_pend_stat);
6129 INIT_LIST_HEAD(&priv->tx_free_list);
6130 INIT_LIST_HEAD(&priv->tx_pend_list);
6131 INIT_STAT(&priv->tx_free_stat);
6132 INIT_STAT(&priv->tx_pend_stat);
6134 INIT_LIST_HEAD(&priv->fw_pend_list);
6135 INIT_STAT(&priv->fw_pend_stat);
6137 priv->workqueue = create_workqueue(DRV_NAME);
6139 INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter);
6140 INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work);
6141 INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
6142 INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
6143 INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
6144 INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
6145 INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
6147 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6148 ipw2100_irq_tasklet, (unsigned long)priv);
6150 /* NOTE: We do not start the deferred work for status checks yet */
6151 priv->stop_rf_kill = 1;
6152 priv->stop_hang_check = 1;
6154 return dev;
6157 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6158 const struct pci_device_id *ent)
6160 unsigned long mem_start, mem_len, mem_flags;
6161 void __iomem *base_addr = NULL;
6162 struct net_device *dev = NULL;
6163 struct ipw2100_priv *priv = NULL;
6164 int err = 0;
6165 int registered = 0;
6166 u32 val;
6168 IPW_DEBUG_INFO("enter\n");
6170 mem_start = pci_resource_start(pci_dev, 0);
6171 mem_len = pci_resource_len(pci_dev, 0);
6172 mem_flags = pci_resource_flags(pci_dev, 0);
6174 if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
6175 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6176 err = -ENODEV;
6177 goto fail;
6180 base_addr = ioremap_nocache(mem_start, mem_len);
6181 if (!base_addr) {
6182 printk(KERN_WARNING DRV_NAME
6183 "Error calling ioremap_nocache.\n");
6184 err = -EIO;
6185 goto fail;
6188 /* allocate and initialize our net_device */
6189 dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
6190 if (!dev) {
6191 printk(KERN_WARNING DRV_NAME
6192 "Error calling ipw2100_alloc_device.\n");
6193 err = -ENOMEM;
6194 goto fail;
6197 /* set up PCI mappings for device */
6198 err = pci_enable_device(pci_dev);
6199 if (err) {
6200 printk(KERN_WARNING DRV_NAME
6201 "Error calling pci_enable_device.\n");
6202 return err;
6205 priv = libipw_priv(dev);
6207 pci_set_master(pci_dev);
6208 pci_set_drvdata(pci_dev, priv);
6210 err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
6211 if (err) {
6212 printk(KERN_WARNING DRV_NAME
6213 "Error calling pci_set_dma_mask.\n");
6214 pci_disable_device(pci_dev);
6215 return err;
6218 err = pci_request_regions(pci_dev, DRV_NAME);
6219 if (err) {
6220 printk(KERN_WARNING DRV_NAME
6221 "Error calling pci_request_regions.\n");
6222 pci_disable_device(pci_dev);
6223 return err;
6226 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6227 * PCI Tx retries from interfering with C3 CPU state */
6228 pci_read_config_dword(pci_dev, 0x40, &val);
6229 if ((val & 0x0000ff00) != 0)
6230 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6232 pci_set_power_state(pci_dev, PCI_D0);
6234 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6235 printk(KERN_WARNING DRV_NAME
6236 "Device not found via register read.\n");
6237 err = -ENODEV;
6238 goto fail;
6241 SET_NETDEV_DEV(dev, &pci_dev->dev);
6243 /* Force interrupts to be shut off on the device */
6244 priv->status |= STATUS_INT_ENABLED;
6245 ipw2100_disable_interrupts(priv);
6247 /* Allocate and initialize the Tx/Rx queues and lists */
6248 if (ipw2100_queues_allocate(priv)) {
6249 printk(KERN_WARNING DRV_NAME
6250 "Error calling ipw2100_queues_allocate.\n");
6251 err = -ENOMEM;
6252 goto fail;
6254 ipw2100_queues_initialize(priv);
6256 err = request_irq(pci_dev->irq,
6257 ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
6258 if (err) {
6259 printk(KERN_WARNING DRV_NAME
6260 "Error calling request_irq: %d.\n", pci_dev->irq);
6261 goto fail;
6263 dev->irq = pci_dev->irq;
6265 IPW_DEBUG_INFO("Attempting to register device...\n");
6267 printk(KERN_INFO DRV_NAME
6268 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6270 /* Bring up the interface. Pre 0.46, after we registered the
6271 * network device we would call ipw2100_up. This introduced a race
6272 * condition with newer hotplug configurations (network was coming
6273 * up and making calls before the device was initialized).
6275 * If we called ipw2100_up before we registered the device, then the
6276 * device name wasn't registered. So, we instead use the net_dev->init
6277 * member to call a function that then just turns and calls ipw2100_up.
6278 * net_dev->init is called after name allocation but before the
6279 * notifier chain is called */
6280 err = register_netdev(dev);
6281 if (err) {
6282 printk(KERN_WARNING DRV_NAME
6283 "Error calling register_netdev.\n");
6284 goto fail;
6287 mutex_lock(&priv->action_mutex);
6288 registered = 1;
6290 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6292 /* perform this after register_netdev so that dev->name is set */
6293 err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6294 if (err)
6295 goto fail_unlock;
6297 /* If the RF Kill switch is disabled, go ahead and complete the
6298 * startup sequence */
6299 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6300 /* Enable the adapter - sends HOST_COMPLETE */
6301 if (ipw2100_enable_adapter(priv)) {
6302 printk(KERN_WARNING DRV_NAME
6303 ": %s: failed in call to enable adapter.\n",
6304 priv->net_dev->name);
6305 ipw2100_hw_stop_adapter(priv);
6306 err = -EIO;
6307 goto fail_unlock;
6310 /* Start a scan . . . */
6311 ipw2100_set_scan_options(priv);
6312 ipw2100_start_scan(priv);
6315 IPW_DEBUG_INFO("exit\n");
6317 priv->status |= STATUS_INITIALIZED;
6319 mutex_unlock(&priv->action_mutex);
6321 return 0;
6323 fail_unlock:
6324 mutex_unlock(&priv->action_mutex);
6326 fail:
6327 if (dev) {
6328 if (registered)
6329 unregister_netdev(dev);
6331 ipw2100_hw_stop_adapter(priv);
6333 ipw2100_disable_interrupts(priv);
6335 if (dev->irq)
6336 free_irq(dev->irq, priv);
6338 ipw2100_kill_workqueue(priv);
6340 /* These are safe to call even if they weren't allocated */
6341 ipw2100_queues_free(priv);
6342 sysfs_remove_group(&pci_dev->dev.kobj,
6343 &ipw2100_attribute_group);
6345 free_ieee80211(dev, 0);
6346 pci_set_drvdata(pci_dev, NULL);
6349 if (base_addr)
6350 iounmap(base_addr);
6352 pci_release_regions(pci_dev);
6353 pci_disable_device(pci_dev);
6355 return err;
6358 static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6360 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6361 struct net_device *dev;
6363 if (priv) {
6364 mutex_lock(&priv->action_mutex);
6366 priv->status &= ~STATUS_INITIALIZED;
6368 dev = priv->net_dev;
6369 sysfs_remove_group(&pci_dev->dev.kobj,
6370 &ipw2100_attribute_group);
6372 #ifdef CONFIG_PM
6373 if (ipw2100_firmware.version)
6374 ipw2100_release_firmware(priv, &ipw2100_firmware);
6375 #endif
6376 /* Take down the hardware */
6377 ipw2100_down(priv);
6379 /* Release the mutex so that the network subsystem can
6380 * complete any needed calls into the driver... */
6381 mutex_unlock(&priv->action_mutex);
6383 /* Unregister the device first - this results in close()
6384 * being called if the device is open. If we free storage
6385 * first, then close() will crash. */
6386 unregister_netdev(dev);
6388 /* ipw2100_down will ensure that there is no more pending work
6389 * in the workqueue's, so we can safely remove them now. */
6390 ipw2100_kill_workqueue(priv);
6392 ipw2100_queues_free(priv);
6394 /* Free potential debugging firmware snapshot */
6395 ipw2100_snapshot_free(priv);
6397 if (dev->irq)
6398 free_irq(dev->irq, priv);
6400 if (dev->base_addr)
6401 iounmap((void __iomem *)dev->base_addr);
6403 free_ieee80211(dev, 0);
6406 pci_release_regions(pci_dev);
6407 pci_disable_device(pci_dev);
6409 IPW_DEBUG_INFO("exit\n");
6412 #ifdef CONFIG_PM
6413 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6415 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6416 struct net_device *dev = priv->net_dev;
6418 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
6420 mutex_lock(&priv->action_mutex);
6421 if (priv->status & STATUS_INITIALIZED) {
6422 /* Take down the device; powers it off, etc. */
6423 ipw2100_down(priv);
6426 /* Remove the PRESENT state of the device */
6427 netif_device_detach(dev);
6429 pci_save_state(pci_dev);
6430 pci_disable_device(pci_dev);
6431 pci_set_power_state(pci_dev, PCI_D3hot);
6433 priv->suspend_at = get_seconds();
6435 mutex_unlock(&priv->action_mutex);
6437 return 0;
6440 static int ipw2100_resume(struct pci_dev *pci_dev)
6442 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6443 struct net_device *dev = priv->net_dev;
6444 int err;
6445 u32 val;
6447 if (IPW2100_PM_DISABLED)
6448 return 0;
6450 mutex_lock(&priv->action_mutex);
6452 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
6454 pci_set_power_state(pci_dev, PCI_D0);
6455 err = pci_enable_device(pci_dev);
6456 if (err) {
6457 printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
6458 dev->name);
6459 mutex_unlock(&priv->action_mutex);
6460 return err;
6462 pci_restore_state(pci_dev);
6465 * Suspend/Resume resets the PCI configuration space, so we have to
6466 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6467 * from interfering with C3 CPU state. pci_restore_state won't help
6468 * here since it only restores the first 64 bytes pci config header.
6470 pci_read_config_dword(pci_dev, 0x40, &val);
6471 if ((val & 0x0000ff00) != 0)
6472 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6474 /* Set the device back into the PRESENT state; this will also wake
6475 * the queue of needed */
6476 netif_device_attach(dev);
6478 priv->suspend_time = get_seconds() - priv->suspend_at;
6480 /* Bring the device back up */
6481 if (!(priv->status & STATUS_RF_KILL_SW))
6482 ipw2100_up(priv, 0);
6484 mutex_unlock(&priv->action_mutex);
6486 return 0;
6488 #endif
6490 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6492 static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
6493 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6494 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6495 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6496 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6497 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6498 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6499 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6500 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6501 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6502 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6503 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6504 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6505 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6507 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6508 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6509 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6510 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6511 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6513 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6514 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6515 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6516 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6517 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6518 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6519 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6521 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6523 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6524 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6525 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6526 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6527 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6528 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6529 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6531 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6532 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6533 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6534 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6535 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6536 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6538 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6539 {0,},
6542 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6544 static struct pci_driver ipw2100_pci_driver = {
6545 .name = DRV_NAME,
6546 .id_table = ipw2100_pci_id_table,
6547 .probe = ipw2100_pci_init_one,
6548 .remove = __devexit_p(ipw2100_pci_remove_one),
6549 #ifdef CONFIG_PM
6550 .suspend = ipw2100_suspend,
6551 .resume = ipw2100_resume,
6552 #endif
6556 * Initialize the ipw2100 driver/module
6558 * @returns 0 if ok, < 0 errno node con error.
6560 * Note: we cannot init the /proc stuff until the PCI driver is there,
6561 * or we risk an unlikely race condition on someone accessing
6562 * uninitialized data in the PCI dev struct through /proc.
6564 static int __init ipw2100_init(void)
6566 int ret;
6568 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6569 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6571 ret = pci_register_driver(&ipw2100_pci_driver);
6572 if (ret)
6573 goto out;
6575 pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100",
6576 PM_QOS_DEFAULT_VALUE);
6577 #ifdef CONFIG_IPW2100_DEBUG
6578 ipw2100_debug_level = debug;
6579 ret = driver_create_file(&ipw2100_pci_driver.driver,
6580 &driver_attr_debug_level);
6581 #endif
6583 out:
6584 return ret;
6588 * Cleanup ipw2100 driver registration
6590 static void __exit ipw2100_exit(void)
6592 /* FIXME: IPG: check that we have no instances of the devices open */
6593 #ifdef CONFIG_IPW2100_DEBUG
6594 driver_remove_file(&ipw2100_pci_driver.driver,
6595 &driver_attr_debug_level);
6596 #endif
6597 pci_unregister_driver(&ipw2100_pci_driver);
6598 pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100");
6601 module_init(ipw2100_init);
6602 module_exit(ipw2100_exit);
6604 #define WEXT_USECHANNELS 1
6606 static const long ipw2100_frequencies[] = {
6607 2412, 2417, 2422, 2427,
6608 2432, 2437, 2442, 2447,
6609 2452, 2457, 2462, 2467,
6610 2472, 2484
6613 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
6615 static const long ipw2100_rates_11b[] = {
6616 1000000,
6617 2000000,
6618 5500000,
6619 11000000
6622 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
6624 static int ipw2100_wx_get_name(struct net_device *dev,
6625 struct iw_request_info *info,
6626 union iwreq_data *wrqu, char *extra)
6629 * This can be called at any time. No action lock required
6632 struct ipw2100_priv *priv = libipw_priv(dev);
6633 if (!(priv->status & STATUS_ASSOCIATED))
6634 strcpy(wrqu->name, "unassociated");
6635 else
6636 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6638 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6639 return 0;
6642 static int ipw2100_wx_set_freq(struct net_device *dev,
6643 struct iw_request_info *info,
6644 union iwreq_data *wrqu, char *extra)
6646 struct ipw2100_priv *priv = libipw_priv(dev);
6647 struct iw_freq *fwrq = &wrqu->freq;
6648 int err = 0;
6650 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6651 return -EOPNOTSUPP;
6653 mutex_lock(&priv->action_mutex);
6654 if (!(priv->status & STATUS_INITIALIZED)) {
6655 err = -EIO;
6656 goto done;
6659 /* if setting by freq convert to channel */
6660 if (fwrq->e == 1) {
6661 if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
6662 int f = fwrq->m / 100000;
6663 int c = 0;
6665 while ((c < REG_MAX_CHANNEL) &&
6666 (f != ipw2100_frequencies[c]))
6667 c++;
6669 /* hack to fall through */
6670 fwrq->e = 0;
6671 fwrq->m = c + 1;
6675 if (fwrq->e > 0 || fwrq->m > 1000) {
6676 err = -EOPNOTSUPP;
6677 goto done;
6678 } else { /* Set the channel */
6679 IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
6680 err = ipw2100_set_channel(priv, fwrq->m, 0);
6683 done:
6684 mutex_unlock(&priv->action_mutex);
6685 return err;
6688 static int ipw2100_wx_get_freq(struct net_device *dev,
6689 struct iw_request_info *info,
6690 union iwreq_data *wrqu, char *extra)
6693 * This can be called at any time. No action lock required
6696 struct ipw2100_priv *priv = libipw_priv(dev);
6698 wrqu->freq.e = 0;
6700 /* If we are associated, trying to associate, or have a statically
6701 * configured CHANNEL then return that; otherwise return ANY */
6702 if (priv->config & CFG_STATIC_CHANNEL ||
6703 priv->status & STATUS_ASSOCIATED)
6704 wrqu->freq.m = priv->channel;
6705 else
6706 wrqu->freq.m = 0;
6708 IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
6709 return 0;
6713 static int ipw2100_wx_set_mode(struct net_device *dev,
6714 struct iw_request_info *info,
6715 union iwreq_data *wrqu, char *extra)
6717 struct ipw2100_priv *priv = libipw_priv(dev);
6718 int err = 0;
6720 IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
6722 if (wrqu->mode == priv->ieee->iw_mode)
6723 return 0;
6725 mutex_lock(&priv->action_mutex);
6726 if (!(priv->status & STATUS_INITIALIZED)) {
6727 err = -EIO;
6728 goto done;
6731 switch (wrqu->mode) {
6732 #ifdef CONFIG_IPW2100_MONITOR
6733 case IW_MODE_MONITOR:
6734 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
6735 break;
6736 #endif /* CONFIG_IPW2100_MONITOR */
6737 case IW_MODE_ADHOC:
6738 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
6739 break;
6740 case IW_MODE_INFRA:
6741 case IW_MODE_AUTO:
6742 default:
6743 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
6744 break;
6747 done:
6748 mutex_unlock(&priv->action_mutex);
6749 return err;
6752 static int ipw2100_wx_get_mode(struct net_device *dev,
6753 struct iw_request_info *info,
6754 union iwreq_data *wrqu, char *extra)
6757 * This can be called at any time. No action lock required
6760 struct ipw2100_priv *priv = libipw_priv(dev);
6762 wrqu->mode = priv->ieee->iw_mode;
6763 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
6765 return 0;
6768 #define POWER_MODES 5
6770 /* Values are in microsecond */
6771 static const s32 timeout_duration[POWER_MODES] = {
6772 350000,
6773 250000,
6774 75000,
6775 37000,
6776 25000,
6779 static const s32 period_duration[POWER_MODES] = {
6780 400000,
6781 700000,
6782 1000000,
6783 1000000,
6784 1000000
6787 static int ipw2100_wx_get_range(struct net_device *dev,
6788 struct iw_request_info *info,
6789 union iwreq_data *wrqu, char *extra)
6792 * This can be called at any time. No action lock required
6795 struct ipw2100_priv *priv = libipw_priv(dev);
6796 struct iw_range *range = (struct iw_range *)extra;
6797 u16 val;
6798 int i, level;
6800 wrqu->data.length = sizeof(*range);
6801 memset(range, 0, sizeof(*range));
6803 /* Let's try to keep this struct in the same order as in
6804 * linux/include/wireless.h
6807 /* TODO: See what values we can set, and remove the ones we can't
6808 * set, or fill them with some default data.
6811 /* ~5 Mb/s real (802.11b) */
6812 range->throughput = 5 * 1000 * 1000;
6814 // range->sensitivity; /* signal level threshold range */
6816 range->max_qual.qual = 100;
6817 /* TODO: Find real max RSSI and stick here */
6818 range->max_qual.level = 0;
6819 range->max_qual.noise = 0;
6820 range->max_qual.updated = 7; /* Updated all three */
6822 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
6823 /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
6824 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
6825 range->avg_qual.noise = 0;
6826 range->avg_qual.updated = 7; /* Updated all three */
6828 range->num_bitrates = RATE_COUNT;
6830 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
6831 range->bitrate[i] = ipw2100_rates_11b[i];
6834 range->min_rts = MIN_RTS_THRESHOLD;
6835 range->max_rts = MAX_RTS_THRESHOLD;
6836 range->min_frag = MIN_FRAG_THRESHOLD;
6837 range->max_frag = MAX_FRAG_THRESHOLD;
6839 range->min_pmp = period_duration[0]; /* Minimal PM period */
6840 range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
6841 range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
6842 range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
6844 /* How to decode max/min PM period */
6845 range->pmp_flags = IW_POWER_PERIOD;
6846 /* How to decode max/min PM period */
6847 range->pmt_flags = IW_POWER_TIMEOUT;
6848 /* What PM options are supported */
6849 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
6851 range->encoding_size[0] = 5;
6852 range->encoding_size[1] = 13; /* Different token sizes */
6853 range->num_encoding_sizes = 2; /* Number of entry in the list */
6854 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
6855 // range->encoding_login_index; /* token index for login token */
6857 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
6858 range->txpower_capa = IW_TXPOW_DBM;
6859 range->num_txpower = IW_MAX_TXPOWER;
6860 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
6861 i < IW_MAX_TXPOWER;
6862 i++, level -=
6863 ((IPW_TX_POWER_MAX_DBM -
6864 IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
6865 range->txpower[i] = level / 16;
6866 } else {
6867 range->txpower_capa = 0;
6868 range->num_txpower = 0;
6871 /* Set the Wireless Extension versions */
6872 range->we_version_compiled = WIRELESS_EXT;
6873 range->we_version_source = 18;
6875 // range->retry_capa; /* What retry options are supported */
6876 // range->retry_flags; /* How to decode max/min retry limit */
6877 // range->r_time_flags; /* How to decode max/min retry life */
6878 // range->min_retry; /* Minimal number of retries */
6879 // range->max_retry; /* Maximal number of retries */
6880 // range->min_r_time; /* Minimal retry lifetime */
6881 // range->max_r_time; /* Maximal retry lifetime */
6883 range->num_channels = FREQ_COUNT;
6885 val = 0;
6886 for (i = 0; i < FREQ_COUNT; i++) {
6887 // TODO: Include only legal frequencies for some countries
6888 // if (local->channel_mask & (1 << i)) {
6889 range->freq[val].i = i + 1;
6890 range->freq[val].m = ipw2100_frequencies[i] * 100000;
6891 range->freq[val].e = 1;
6892 val++;
6893 // }
6894 if (val == IW_MAX_FREQUENCIES)
6895 break;
6897 range->num_frequency = val;
6899 /* Event capability (kernel + driver) */
6900 range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
6901 IW_EVENT_CAPA_MASK(SIOCGIWAP));
6902 range->event_capa[1] = IW_EVENT_CAPA_K_1;
6904 range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
6905 IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
6907 IPW_DEBUG_WX("GET Range\n");
6909 return 0;
6912 static int ipw2100_wx_set_wap(struct net_device *dev,
6913 struct iw_request_info *info,
6914 union iwreq_data *wrqu, char *extra)
6916 struct ipw2100_priv *priv = libipw_priv(dev);
6917 int err = 0;
6919 static const unsigned char any[] = {
6920 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6922 static const unsigned char off[] = {
6923 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6926 // sanity checks
6927 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
6928 return -EINVAL;
6930 mutex_lock(&priv->action_mutex);
6931 if (!(priv->status & STATUS_INITIALIZED)) {
6932 err = -EIO;
6933 goto done;
6936 if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
6937 !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
6938 /* we disable mandatory BSSID association */
6939 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6940 priv->config &= ~CFG_STATIC_BSSID;
6941 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
6942 goto done;
6945 priv->config |= CFG_STATIC_BSSID;
6946 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
6948 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
6950 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data);
6952 done:
6953 mutex_unlock(&priv->action_mutex);
6954 return err;
6957 static int ipw2100_wx_get_wap(struct net_device *dev,
6958 struct iw_request_info *info,
6959 union iwreq_data *wrqu, char *extra)
6962 * This can be called at any time. No action lock required
6965 struct ipw2100_priv *priv = libipw_priv(dev);
6967 /* If we are associated, trying to associate, or have a statically
6968 * configured BSSID then return that; otherwise return ANY */
6969 if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
6970 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
6971 memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
6972 } else
6973 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
6975 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data);
6976 return 0;
6979 static int ipw2100_wx_set_essid(struct net_device *dev,
6980 struct iw_request_info *info,
6981 union iwreq_data *wrqu, char *extra)
6983 struct ipw2100_priv *priv = libipw_priv(dev);
6984 char *essid = ""; /* ANY */
6985 int length = 0;
6986 int err = 0;
6987 DECLARE_SSID_BUF(ssid);
6989 mutex_lock(&priv->action_mutex);
6990 if (!(priv->status & STATUS_INITIALIZED)) {
6991 err = -EIO;
6992 goto done;
6995 if (wrqu->essid.flags && wrqu->essid.length) {
6996 length = wrqu->essid.length;
6997 essid = extra;
7000 if (length == 0) {
7001 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7002 priv->config &= ~CFG_STATIC_ESSID;
7003 err = ipw2100_set_essid(priv, NULL, 0, 0);
7004 goto done;
7007 length = min(length, IW_ESSID_MAX_SIZE);
7009 priv->config |= CFG_STATIC_ESSID;
7011 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
7012 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7013 err = 0;
7014 goto done;
7017 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7018 print_ssid(ssid, essid, length), length);
7020 priv->essid_len = length;
7021 memcpy(priv->essid, essid, priv->essid_len);
7023 err = ipw2100_set_essid(priv, essid, length, 0);
7025 done:
7026 mutex_unlock(&priv->action_mutex);
7027 return err;
7030 static int ipw2100_wx_get_essid(struct net_device *dev,
7031 struct iw_request_info *info,
7032 union iwreq_data *wrqu, char *extra)
7035 * This can be called at any time. No action lock required
7038 struct ipw2100_priv *priv = libipw_priv(dev);
7039 DECLARE_SSID_BUF(ssid);
7041 /* If we are associated, trying to associate, or have a statically
7042 * configured ESSID then return that; otherwise return ANY */
7043 if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
7044 IPW_DEBUG_WX("Getting essid: '%s'\n",
7045 print_ssid(ssid, priv->essid, priv->essid_len));
7046 memcpy(extra, priv->essid, priv->essid_len);
7047 wrqu->essid.length = priv->essid_len;
7048 wrqu->essid.flags = 1; /* active */
7049 } else {
7050 IPW_DEBUG_WX("Getting essid: ANY\n");
7051 wrqu->essid.length = 0;
7052 wrqu->essid.flags = 0; /* active */
7055 return 0;
7058 static int ipw2100_wx_set_nick(struct net_device *dev,
7059 struct iw_request_info *info,
7060 union iwreq_data *wrqu, char *extra)
7063 * This can be called at any time. No action lock required
7066 struct ipw2100_priv *priv = libipw_priv(dev);
7068 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7069 return -E2BIG;
7071 wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
7072 memset(priv->nick, 0, sizeof(priv->nick));
7073 memcpy(priv->nick, extra, wrqu->data.length);
7075 IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
7077 return 0;
7080 static int ipw2100_wx_get_nick(struct net_device *dev,
7081 struct iw_request_info *info,
7082 union iwreq_data *wrqu, char *extra)
7085 * This can be called at any time. No action lock required
7088 struct ipw2100_priv *priv = libipw_priv(dev);
7090 wrqu->data.length = strlen(priv->nick);
7091 memcpy(extra, priv->nick, wrqu->data.length);
7092 wrqu->data.flags = 1; /* active */
7094 IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
7096 return 0;
7099 static int ipw2100_wx_set_rate(struct net_device *dev,
7100 struct iw_request_info *info,
7101 union iwreq_data *wrqu, char *extra)
7103 struct ipw2100_priv *priv = libipw_priv(dev);
7104 u32 target_rate = wrqu->bitrate.value;
7105 u32 rate;
7106 int err = 0;
7108 mutex_lock(&priv->action_mutex);
7109 if (!(priv->status & STATUS_INITIALIZED)) {
7110 err = -EIO;
7111 goto done;
7114 rate = 0;
7116 if (target_rate == 1000000 ||
7117 (!wrqu->bitrate.fixed && target_rate > 1000000))
7118 rate |= TX_RATE_1_MBIT;
7119 if (target_rate == 2000000 ||
7120 (!wrqu->bitrate.fixed && target_rate > 2000000))
7121 rate |= TX_RATE_2_MBIT;
7122 if (target_rate == 5500000 ||
7123 (!wrqu->bitrate.fixed && target_rate > 5500000))
7124 rate |= TX_RATE_5_5_MBIT;
7125 if (target_rate == 11000000 ||
7126 (!wrqu->bitrate.fixed && target_rate > 11000000))
7127 rate |= TX_RATE_11_MBIT;
7128 if (rate == 0)
7129 rate = DEFAULT_TX_RATES;
7131 err = ipw2100_set_tx_rates(priv, rate, 0);
7133 IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
7134 done:
7135 mutex_unlock(&priv->action_mutex);
7136 return err;
7139 static int ipw2100_wx_get_rate(struct net_device *dev,
7140 struct iw_request_info *info,
7141 union iwreq_data *wrqu, char *extra)
7143 struct ipw2100_priv *priv = libipw_priv(dev);
7144 int val;
7145 unsigned int len = sizeof(val);
7146 int err = 0;
7148 if (!(priv->status & STATUS_ENABLED) ||
7149 priv->status & STATUS_RF_KILL_MASK ||
7150 !(priv->status & STATUS_ASSOCIATED)) {
7151 wrqu->bitrate.value = 0;
7152 return 0;
7155 mutex_lock(&priv->action_mutex);
7156 if (!(priv->status & STATUS_INITIALIZED)) {
7157 err = -EIO;
7158 goto done;
7161 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7162 if (err) {
7163 IPW_DEBUG_WX("failed querying ordinals.\n");
7164 goto done;
7167 switch (val & TX_RATE_MASK) {
7168 case TX_RATE_1_MBIT:
7169 wrqu->bitrate.value = 1000000;
7170 break;
7171 case TX_RATE_2_MBIT:
7172 wrqu->bitrate.value = 2000000;
7173 break;
7174 case TX_RATE_5_5_MBIT:
7175 wrqu->bitrate.value = 5500000;
7176 break;
7177 case TX_RATE_11_MBIT:
7178 wrqu->bitrate.value = 11000000;
7179 break;
7180 default:
7181 wrqu->bitrate.value = 0;
7184 IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
7186 done:
7187 mutex_unlock(&priv->action_mutex);
7188 return err;
7191 static int ipw2100_wx_set_rts(struct net_device *dev,
7192 struct iw_request_info *info,
7193 union iwreq_data *wrqu, char *extra)
7195 struct ipw2100_priv *priv = libipw_priv(dev);
7196 int value, err;
7198 /* Auto RTS not yet supported */
7199 if (wrqu->rts.fixed == 0)
7200 return -EINVAL;
7202 mutex_lock(&priv->action_mutex);
7203 if (!(priv->status & STATUS_INITIALIZED)) {
7204 err = -EIO;
7205 goto done;
7208 if (wrqu->rts.disabled)
7209 value = priv->rts_threshold | RTS_DISABLED;
7210 else {
7211 if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
7212 err = -EINVAL;
7213 goto done;
7215 value = wrqu->rts.value;
7218 err = ipw2100_set_rts_threshold(priv, value);
7220 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
7221 done:
7222 mutex_unlock(&priv->action_mutex);
7223 return err;
7226 static int ipw2100_wx_get_rts(struct net_device *dev,
7227 struct iw_request_info *info,
7228 union iwreq_data *wrqu, char *extra)
7231 * This can be called at any time. No action lock required
7234 struct ipw2100_priv *priv = libipw_priv(dev);
7236 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7237 wrqu->rts.fixed = 1; /* no auto select */
7239 /* If RTS is set to the default value, then it is disabled */
7240 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7242 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
7244 return 0;
7247 static int ipw2100_wx_set_txpow(struct net_device *dev,
7248 struct iw_request_info *info,
7249 union iwreq_data *wrqu, char *extra)
7251 struct ipw2100_priv *priv = libipw_priv(dev);
7252 int err = 0, value;
7254 if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
7255 return -EINPROGRESS;
7257 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7258 return 0;
7260 if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
7261 return -EINVAL;
7263 if (wrqu->txpower.fixed == 0)
7264 value = IPW_TX_POWER_DEFAULT;
7265 else {
7266 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7267 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7268 return -EINVAL;
7270 value = wrqu->txpower.value;
7273 mutex_lock(&priv->action_mutex);
7274 if (!(priv->status & STATUS_INITIALIZED)) {
7275 err = -EIO;
7276 goto done;
7279 err = ipw2100_set_tx_power(priv, value);
7281 IPW_DEBUG_WX("SET TX Power -> %d \n", value);
7283 done:
7284 mutex_unlock(&priv->action_mutex);
7285 return err;
7288 static int ipw2100_wx_get_txpow(struct net_device *dev,
7289 struct iw_request_info *info,
7290 union iwreq_data *wrqu, char *extra)
7293 * This can be called at any time. No action lock required
7296 struct ipw2100_priv *priv = libipw_priv(dev);
7298 wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
7300 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7301 wrqu->txpower.fixed = 0;
7302 wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
7303 } else {
7304 wrqu->txpower.fixed = 1;
7305 wrqu->txpower.value = priv->tx_power;
7308 wrqu->txpower.flags = IW_TXPOW_DBM;
7310 IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
7312 return 0;
7315 static int ipw2100_wx_set_frag(struct net_device *dev,
7316 struct iw_request_info *info,
7317 union iwreq_data *wrqu, char *extra)
7320 * This can be called at any time. No action lock required
7323 struct ipw2100_priv *priv = libipw_priv(dev);
7325 if (!wrqu->frag.fixed)
7326 return -EINVAL;
7328 if (wrqu->frag.disabled) {
7329 priv->frag_threshold |= FRAG_DISABLED;
7330 priv->ieee->fts = DEFAULT_FTS;
7331 } else {
7332 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7333 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7334 return -EINVAL;
7336 priv->ieee->fts = wrqu->frag.value & ~0x1;
7337 priv->frag_threshold = priv->ieee->fts;
7340 IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
7342 return 0;
7345 static int ipw2100_wx_get_frag(struct net_device *dev,
7346 struct iw_request_info *info,
7347 union iwreq_data *wrqu, char *extra)
7350 * This can be called at any time. No action lock required
7353 struct ipw2100_priv *priv = libipw_priv(dev);
7354 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7355 wrqu->frag.fixed = 0; /* no auto select */
7356 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7358 IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
7360 return 0;
7363 static int ipw2100_wx_set_retry(struct net_device *dev,
7364 struct iw_request_info *info,
7365 union iwreq_data *wrqu, char *extra)
7367 struct ipw2100_priv *priv = libipw_priv(dev);
7368 int err = 0;
7370 if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
7371 return -EINVAL;
7373 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7374 return 0;
7376 mutex_lock(&priv->action_mutex);
7377 if (!(priv->status & STATUS_INITIALIZED)) {
7378 err = -EIO;
7379 goto done;
7382 if (wrqu->retry.flags & IW_RETRY_SHORT) {
7383 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7384 IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
7385 wrqu->retry.value);
7386 goto done;
7389 if (wrqu->retry.flags & IW_RETRY_LONG) {
7390 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7391 IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
7392 wrqu->retry.value);
7393 goto done;
7396 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7397 if (!err)
7398 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7400 IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
7402 done:
7403 mutex_unlock(&priv->action_mutex);
7404 return err;
7407 static int ipw2100_wx_get_retry(struct net_device *dev,
7408 struct iw_request_info *info,
7409 union iwreq_data *wrqu, char *extra)
7412 * This can be called at any time. No action lock required
7415 struct ipw2100_priv *priv = libipw_priv(dev);
7417 wrqu->retry.disabled = 0; /* can't be disabled */
7419 if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
7420 return -EINVAL;
7422 if (wrqu->retry.flags & IW_RETRY_LONG) {
7423 wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
7424 wrqu->retry.value = priv->long_retry_limit;
7425 } else {
7426 wrqu->retry.flags =
7427 (priv->short_retry_limit !=
7428 priv->long_retry_limit) ?
7429 IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT;
7431 wrqu->retry.value = priv->short_retry_limit;
7434 IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
7436 return 0;
7439 static int ipw2100_wx_set_scan(struct net_device *dev,
7440 struct iw_request_info *info,
7441 union iwreq_data *wrqu, char *extra)
7443 struct ipw2100_priv *priv = libipw_priv(dev);
7444 int err = 0;
7446 mutex_lock(&priv->action_mutex);
7447 if (!(priv->status & STATUS_INITIALIZED)) {
7448 err = -EIO;
7449 goto done;
7452 IPW_DEBUG_WX("Initiating scan...\n");
7454 priv->user_requested_scan = 1;
7455 if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
7456 IPW_DEBUG_WX("Start scan failed.\n");
7458 /* TODO: Mark a scan as pending so when hardware initialized
7459 * a scan starts */
7462 done:
7463 mutex_unlock(&priv->action_mutex);
7464 return err;
7467 static int ipw2100_wx_get_scan(struct net_device *dev,
7468 struct iw_request_info *info,
7469 union iwreq_data *wrqu, char *extra)
7472 * This can be called at any time. No action lock required
7475 struct ipw2100_priv *priv = libipw_priv(dev);
7476 return libipw_wx_get_scan(priv->ieee, info, wrqu, extra);
7480 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7482 static int ipw2100_wx_set_encode(struct net_device *dev,
7483 struct iw_request_info *info,
7484 union iwreq_data *wrqu, char *key)
7487 * No check of STATUS_INITIALIZED required
7490 struct ipw2100_priv *priv = libipw_priv(dev);
7491 return libipw_wx_set_encode(priv->ieee, info, wrqu, key);
7494 static int ipw2100_wx_get_encode(struct net_device *dev,
7495 struct iw_request_info *info,
7496 union iwreq_data *wrqu, char *key)
7499 * This can be called at any time. No action lock required
7502 struct ipw2100_priv *priv = libipw_priv(dev);
7503 return libipw_wx_get_encode(priv->ieee, info, wrqu, key);
7506 static int ipw2100_wx_set_power(struct net_device *dev,
7507 struct iw_request_info *info,
7508 union iwreq_data *wrqu, char *extra)
7510 struct ipw2100_priv *priv = libipw_priv(dev);
7511 int err = 0;
7513 mutex_lock(&priv->action_mutex);
7514 if (!(priv->status & STATUS_INITIALIZED)) {
7515 err = -EIO;
7516 goto done;
7519 if (wrqu->power.disabled) {
7520 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7521 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7522 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7523 goto done;
7526 switch (wrqu->power.flags & IW_POWER_MODE) {
7527 case IW_POWER_ON: /* If not specified */
7528 case IW_POWER_MODE: /* If set all mask */
7529 case IW_POWER_ALL_R: /* If explicitly state all */
7530 break;
7531 default: /* Otherwise we don't support it */
7532 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7533 wrqu->power.flags);
7534 err = -EOPNOTSUPP;
7535 goto done;
7538 /* If the user hasn't specified a power management mode yet, default
7539 * to BATTERY */
7540 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7541 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7543 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
7545 done:
7546 mutex_unlock(&priv->action_mutex);
7547 return err;
7551 static int ipw2100_wx_get_power(struct net_device *dev,
7552 struct iw_request_info *info,
7553 union iwreq_data *wrqu, char *extra)
7556 * This can be called at any time. No action lock required
7559 struct ipw2100_priv *priv = libipw_priv(dev);
7561 if (!(priv->power_mode & IPW_POWER_ENABLED))
7562 wrqu->power.disabled = 1;
7563 else {
7564 wrqu->power.disabled = 0;
7565 wrqu->power.flags = 0;
7568 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7570 return 0;
7574 * WE-18 WPA support
7577 /* SIOCSIWGENIE */
7578 static int ipw2100_wx_set_genie(struct net_device *dev,
7579 struct iw_request_info *info,
7580 union iwreq_data *wrqu, char *extra)
7583 struct ipw2100_priv *priv = libipw_priv(dev);
7584 struct libipw_device *ieee = priv->ieee;
7585 u8 *buf;
7587 if (!ieee->wpa_enabled)
7588 return -EOPNOTSUPP;
7590 if (wrqu->data.length > MAX_WPA_IE_LEN ||
7591 (wrqu->data.length && extra == NULL))
7592 return -EINVAL;
7594 if (wrqu->data.length) {
7595 buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
7596 if (buf == NULL)
7597 return -ENOMEM;
7599 kfree(ieee->wpa_ie);
7600 ieee->wpa_ie = buf;
7601 ieee->wpa_ie_len = wrqu->data.length;
7602 } else {
7603 kfree(ieee->wpa_ie);
7604 ieee->wpa_ie = NULL;
7605 ieee->wpa_ie_len = 0;
7608 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
7610 return 0;
7613 /* SIOCGIWGENIE */
7614 static int ipw2100_wx_get_genie(struct net_device *dev,
7615 struct iw_request_info *info,
7616 union iwreq_data *wrqu, char *extra)
7618 struct ipw2100_priv *priv = libipw_priv(dev);
7619 struct libipw_device *ieee = priv->ieee;
7621 if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
7622 wrqu->data.length = 0;
7623 return 0;
7626 if (wrqu->data.length < ieee->wpa_ie_len)
7627 return -E2BIG;
7629 wrqu->data.length = ieee->wpa_ie_len;
7630 memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
7632 return 0;
7635 /* SIOCSIWAUTH */
7636 static int ipw2100_wx_set_auth(struct net_device *dev,
7637 struct iw_request_info *info,
7638 union iwreq_data *wrqu, char *extra)
7640 struct ipw2100_priv *priv = libipw_priv(dev);
7641 struct libipw_device *ieee = priv->ieee;
7642 struct iw_param *param = &wrqu->param;
7643 struct lib80211_crypt_data *crypt;
7644 unsigned long flags;
7645 int ret = 0;
7647 switch (param->flags & IW_AUTH_INDEX) {
7648 case IW_AUTH_WPA_VERSION:
7649 case IW_AUTH_CIPHER_PAIRWISE:
7650 case IW_AUTH_CIPHER_GROUP:
7651 case IW_AUTH_KEY_MGMT:
7653 * ipw2200 does not use these parameters
7655 break;
7657 case IW_AUTH_TKIP_COUNTERMEASURES:
7658 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7659 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags)
7660 break;
7662 flags = crypt->ops->get_flags(crypt->priv);
7664 if (param->value)
7665 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7666 else
7667 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7669 crypt->ops->set_flags(flags, crypt->priv);
7671 break;
7673 case IW_AUTH_DROP_UNENCRYPTED:{
7674 /* HACK:
7676 * wpa_supplicant calls set_wpa_enabled when the driver
7677 * is loaded and unloaded, regardless of if WPA is being
7678 * used. No other calls are made which can be used to
7679 * determine if encryption will be used or not prior to
7680 * association being expected. If encryption is not being
7681 * used, drop_unencrypted is set to false, else true -- we
7682 * can use this to determine if the CAP_PRIVACY_ON bit should
7683 * be set.
7685 struct libipw_security sec = {
7686 .flags = SEC_ENABLED,
7687 .enabled = param->value,
7689 priv->ieee->drop_unencrypted = param->value;
7690 /* We only change SEC_LEVEL for open mode. Others
7691 * are set by ipw_wpa_set_encryption.
7693 if (!param->value) {
7694 sec.flags |= SEC_LEVEL;
7695 sec.level = SEC_LEVEL_0;
7696 } else {
7697 sec.flags |= SEC_LEVEL;
7698 sec.level = SEC_LEVEL_1;
7700 if (priv->ieee->set_security)
7701 priv->ieee->set_security(priv->ieee->dev, &sec);
7702 break;
7705 case IW_AUTH_80211_AUTH_ALG:
7706 ret = ipw2100_wpa_set_auth_algs(priv, param->value);
7707 break;
7709 case IW_AUTH_WPA_ENABLED:
7710 ret = ipw2100_wpa_enable(priv, param->value);
7711 break;
7713 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7714 ieee->ieee802_1x = param->value;
7715 break;
7717 //case IW_AUTH_ROAMING_CONTROL:
7718 case IW_AUTH_PRIVACY_INVOKED:
7719 ieee->privacy_invoked = param->value;
7720 break;
7722 default:
7723 return -EOPNOTSUPP;
7725 return ret;
7728 /* SIOCGIWAUTH */
7729 static int ipw2100_wx_get_auth(struct net_device *dev,
7730 struct iw_request_info *info,
7731 union iwreq_data *wrqu, char *extra)
7733 struct ipw2100_priv *priv = libipw_priv(dev);
7734 struct libipw_device *ieee = priv->ieee;
7735 struct lib80211_crypt_data *crypt;
7736 struct iw_param *param = &wrqu->param;
7737 int ret = 0;
7739 switch (param->flags & IW_AUTH_INDEX) {
7740 case IW_AUTH_WPA_VERSION:
7741 case IW_AUTH_CIPHER_PAIRWISE:
7742 case IW_AUTH_CIPHER_GROUP:
7743 case IW_AUTH_KEY_MGMT:
7745 * wpa_supplicant will control these internally
7747 ret = -EOPNOTSUPP;
7748 break;
7750 case IW_AUTH_TKIP_COUNTERMEASURES:
7751 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7752 if (!crypt || !crypt->ops->get_flags) {
7753 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7754 "crypt not set!\n");
7755 break;
7758 param->value = (crypt->ops->get_flags(crypt->priv) &
7759 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
7761 break;
7763 case IW_AUTH_DROP_UNENCRYPTED:
7764 param->value = ieee->drop_unencrypted;
7765 break;
7767 case IW_AUTH_80211_AUTH_ALG:
7768 param->value = priv->ieee->sec.auth_mode;
7769 break;
7771 case IW_AUTH_WPA_ENABLED:
7772 param->value = ieee->wpa_enabled;
7773 break;
7775 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7776 param->value = ieee->ieee802_1x;
7777 break;
7779 case IW_AUTH_ROAMING_CONTROL:
7780 case IW_AUTH_PRIVACY_INVOKED:
7781 param->value = ieee->privacy_invoked;
7782 break;
7784 default:
7785 return -EOPNOTSUPP;
7787 return 0;
7790 /* SIOCSIWENCODEEXT */
7791 static int ipw2100_wx_set_encodeext(struct net_device *dev,
7792 struct iw_request_info *info,
7793 union iwreq_data *wrqu, char *extra)
7795 struct ipw2100_priv *priv = libipw_priv(dev);
7796 return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra);
7799 /* SIOCGIWENCODEEXT */
7800 static int ipw2100_wx_get_encodeext(struct net_device *dev,
7801 struct iw_request_info *info,
7802 union iwreq_data *wrqu, char *extra)
7804 struct ipw2100_priv *priv = libipw_priv(dev);
7805 return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra);
7808 /* SIOCSIWMLME */
7809 static int ipw2100_wx_set_mlme(struct net_device *dev,
7810 struct iw_request_info *info,
7811 union iwreq_data *wrqu, char *extra)
7813 struct ipw2100_priv *priv = libipw_priv(dev);
7814 struct iw_mlme *mlme = (struct iw_mlme *)extra;
7815 __le16 reason;
7817 reason = cpu_to_le16(mlme->reason_code);
7819 switch (mlme->cmd) {
7820 case IW_MLME_DEAUTH:
7821 // silently ignore
7822 break;
7824 case IW_MLME_DISASSOC:
7825 ipw2100_disassociate_bssid(priv);
7826 break;
7828 default:
7829 return -EOPNOTSUPP;
7831 return 0;
7836 * IWPRIV handlers
7839 #ifdef CONFIG_IPW2100_MONITOR
7840 static int ipw2100_wx_set_promisc(struct net_device *dev,
7841 struct iw_request_info *info,
7842 union iwreq_data *wrqu, char *extra)
7844 struct ipw2100_priv *priv = libipw_priv(dev);
7845 int *parms = (int *)extra;
7846 int enable = (parms[0] > 0);
7847 int err = 0;
7849 mutex_lock(&priv->action_mutex);
7850 if (!(priv->status & STATUS_INITIALIZED)) {
7851 err = -EIO;
7852 goto done;
7855 if (enable) {
7856 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
7857 err = ipw2100_set_channel(priv, parms[1], 0);
7858 goto done;
7860 priv->channel = parms[1];
7861 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7862 } else {
7863 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
7864 err = ipw2100_switch_mode(priv, priv->last_mode);
7866 done:
7867 mutex_unlock(&priv->action_mutex);
7868 return err;
7871 static int ipw2100_wx_reset(struct net_device *dev,
7872 struct iw_request_info *info,
7873 union iwreq_data *wrqu, char *extra)
7875 struct ipw2100_priv *priv = libipw_priv(dev);
7876 if (priv->status & STATUS_INITIALIZED)
7877 schedule_reset(priv);
7878 return 0;
7881 #endif
7883 static int ipw2100_wx_set_powermode(struct net_device *dev,
7884 struct iw_request_info *info,
7885 union iwreq_data *wrqu, char *extra)
7887 struct ipw2100_priv *priv = libipw_priv(dev);
7888 int err = 0, mode = *(int *)extra;
7890 mutex_lock(&priv->action_mutex);
7891 if (!(priv->status & STATUS_INITIALIZED)) {
7892 err = -EIO;
7893 goto done;
7896 if ((mode < 0) || (mode > POWER_MODES))
7897 mode = IPW_POWER_AUTO;
7899 if (IPW_POWER_LEVEL(priv->power_mode) != mode)
7900 err = ipw2100_set_power_mode(priv, mode);
7901 done:
7902 mutex_unlock(&priv->action_mutex);
7903 return err;
7906 #define MAX_POWER_STRING 80
7907 static int ipw2100_wx_get_powermode(struct net_device *dev,
7908 struct iw_request_info *info,
7909 union iwreq_data *wrqu, char *extra)
7912 * This can be called at any time. No action lock required
7915 struct ipw2100_priv *priv = libipw_priv(dev);
7916 int level = IPW_POWER_LEVEL(priv->power_mode);
7917 s32 timeout, period;
7919 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7920 snprintf(extra, MAX_POWER_STRING,
7921 "Power save level: %d (Off)", level);
7922 } else {
7923 switch (level) {
7924 case IPW_POWER_MODE_CAM:
7925 snprintf(extra, MAX_POWER_STRING,
7926 "Power save level: %d (None)", level);
7927 break;
7928 case IPW_POWER_AUTO:
7929 snprintf(extra, MAX_POWER_STRING,
7930 "Power save level: %d (Auto)", level);
7931 break;
7932 default:
7933 timeout = timeout_duration[level - 1] / 1000;
7934 period = period_duration[level - 1] / 1000;
7935 snprintf(extra, MAX_POWER_STRING,
7936 "Power save level: %d "
7937 "(Timeout %dms, Period %dms)",
7938 level, timeout, period);
7942 wrqu->data.length = strlen(extra) + 1;
7944 return 0;
7947 static int ipw2100_wx_set_preamble(struct net_device *dev,
7948 struct iw_request_info *info,
7949 union iwreq_data *wrqu, char *extra)
7951 struct ipw2100_priv *priv = libipw_priv(dev);
7952 int err, mode = *(int *)extra;
7954 mutex_lock(&priv->action_mutex);
7955 if (!(priv->status & STATUS_INITIALIZED)) {
7956 err = -EIO;
7957 goto done;
7960 if (mode == 1)
7961 priv->config |= CFG_LONG_PREAMBLE;
7962 else if (mode == 0)
7963 priv->config &= ~CFG_LONG_PREAMBLE;
7964 else {
7965 err = -EINVAL;
7966 goto done;
7969 err = ipw2100_system_config(priv, 0);
7971 done:
7972 mutex_unlock(&priv->action_mutex);
7973 return err;
7976 static int ipw2100_wx_get_preamble(struct net_device *dev,
7977 struct iw_request_info *info,
7978 union iwreq_data *wrqu, char *extra)
7981 * This can be called at any time. No action lock required
7984 struct ipw2100_priv *priv = libipw_priv(dev);
7986 if (priv->config & CFG_LONG_PREAMBLE)
7987 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
7988 else
7989 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
7991 return 0;
7994 #ifdef CONFIG_IPW2100_MONITOR
7995 static int ipw2100_wx_set_crc_check(struct net_device *dev,
7996 struct iw_request_info *info,
7997 union iwreq_data *wrqu, char *extra)
7999 struct ipw2100_priv *priv = libipw_priv(dev);
8000 int err, mode = *(int *)extra;
8002 mutex_lock(&priv->action_mutex);
8003 if (!(priv->status & STATUS_INITIALIZED)) {
8004 err = -EIO;
8005 goto done;
8008 if (mode == 1)
8009 priv->config |= CFG_CRC_CHECK;
8010 else if (mode == 0)
8011 priv->config &= ~CFG_CRC_CHECK;
8012 else {
8013 err = -EINVAL;
8014 goto done;
8016 err = 0;
8018 done:
8019 mutex_unlock(&priv->action_mutex);
8020 return err;
8023 static int ipw2100_wx_get_crc_check(struct net_device *dev,
8024 struct iw_request_info *info,
8025 union iwreq_data *wrqu, char *extra)
8028 * This can be called at any time. No action lock required
8031 struct ipw2100_priv *priv = libipw_priv(dev);
8033 if (priv->config & CFG_CRC_CHECK)
8034 snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
8035 else
8036 snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
8038 return 0;
8040 #endif /* CONFIG_IPW2100_MONITOR */
8042 static iw_handler ipw2100_wx_handlers[] = {
8043 NULL, /* SIOCSIWCOMMIT */
8044 ipw2100_wx_get_name, /* SIOCGIWNAME */
8045 NULL, /* SIOCSIWNWID */
8046 NULL, /* SIOCGIWNWID */
8047 ipw2100_wx_set_freq, /* SIOCSIWFREQ */
8048 ipw2100_wx_get_freq, /* SIOCGIWFREQ */
8049 ipw2100_wx_set_mode, /* SIOCSIWMODE */
8050 ipw2100_wx_get_mode, /* SIOCGIWMODE */
8051 NULL, /* SIOCSIWSENS */
8052 NULL, /* SIOCGIWSENS */
8053 NULL, /* SIOCSIWRANGE */
8054 ipw2100_wx_get_range, /* SIOCGIWRANGE */
8055 NULL, /* SIOCSIWPRIV */
8056 NULL, /* SIOCGIWPRIV */
8057 NULL, /* SIOCSIWSTATS */
8058 NULL, /* SIOCGIWSTATS */
8059 NULL, /* SIOCSIWSPY */
8060 NULL, /* SIOCGIWSPY */
8061 NULL, /* SIOCGIWTHRSPY */
8062 NULL, /* SIOCWIWTHRSPY */
8063 ipw2100_wx_set_wap, /* SIOCSIWAP */
8064 ipw2100_wx_get_wap, /* SIOCGIWAP */
8065 ipw2100_wx_set_mlme, /* SIOCSIWMLME */
8066 NULL, /* SIOCGIWAPLIST -- deprecated */
8067 ipw2100_wx_set_scan, /* SIOCSIWSCAN */
8068 ipw2100_wx_get_scan, /* SIOCGIWSCAN */
8069 ipw2100_wx_set_essid, /* SIOCSIWESSID */
8070 ipw2100_wx_get_essid, /* SIOCGIWESSID */
8071 ipw2100_wx_set_nick, /* SIOCSIWNICKN */
8072 ipw2100_wx_get_nick, /* SIOCGIWNICKN */
8073 NULL, /* -- hole -- */
8074 NULL, /* -- hole -- */
8075 ipw2100_wx_set_rate, /* SIOCSIWRATE */
8076 ipw2100_wx_get_rate, /* SIOCGIWRATE */
8077 ipw2100_wx_set_rts, /* SIOCSIWRTS */
8078 ipw2100_wx_get_rts, /* SIOCGIWRTS */
8079 ipw2100_wx_set_frag, /* SIOCSIWFRAG */
8080 ipw2100_wx_get_frag, /* SIOCGIWFRAG */
8081 ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
8082 ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
8083 ipw2100_wx_set_retry, /* SIOCSIWRETRY */
8084 ipw2100_wx_get_retry, /* SIOCGIWRETRY */
8085 ipw2100_wx_set_encode, /* SIOCSIWENCODE */
8086 ipw2100_wx_get_encode, /* SIOCGIWENCODE */
8087 ipw2100_wx_set_power, /* SIOCSIWPOWER */
8088 ipw2100_wx_get_power, /* SIOCGIWPOWER */
8089 NULL, /* -- hole -- */
8090 NULL, /* -- hole -- */
8091 ipw2100_wx_set_genie, /* SIOCSIWGENIE */
8092 ipw2100_wx_get_genie, /* SIOCGIWGENIE */
8093 ipw2100_wx_set_auth, /* SIOCSIWAUTH */
8094 ipw2100_wx_get_auth, /* SIOCGIWAUTH */
8095 ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */
8096 ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */
8097 NULL, /* SIOCSIWPMKSA */
8100 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8101 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8102 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8103 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8104 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8105 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8106 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8107 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8109 static const struct iw_priv_args ipw2100_private_args[] = {
8111 #ifdef CONFIG_IPW2100_MONITOR
8113 IPW2100_PRIV_SET_MONITOR,
8114 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
8116 IPW2100_PRIV_RESET,
8117 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
8118 #endif /* CONFIG_IPW2100_MONITOR */
8121 IPW2100_PRIV_SET_POWER,
8122 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
8124 IPW2100_PRIV_GET_POWER,
8125 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
8126 "get_power"},
8128 IPW2100_PRIV_SET_LONGPREAMBLE,
8129 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
8131 IPW2100_PRIV_GET_LONGPREAMBLE,
8132 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
8133 #ifdef CONFIG_IPW2100_MONITOR
8135 IPW2100_PRIV_SET_CRC_CHECK,
8136 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
8138 IPW2100_PRIV_GET_CRC_CHECK,
8139 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
8140 #endif /* CONFIG_IPW2100_MONITOR */
8143 static iw_handler ipw2100_private_handler[] = {
8144 #ifdef CONFIG_IPW2100_MONITOR
8145 ipw2100_wx_set_promisc,
8146 ipw2100_wx_reset,
8147 #else /* CONFIG_IPW2100_MONITOR */
8148 NULL,
8149 NULL,
8150 #endif /* CONFIG_IPW2100_MONITOR */
8151 ipw2100_wx_set_powermode,
8152 ipw2100_wx_get_powermode,
8153 ipw2100_wx_set_preamble,
8154 ipw2100_wx_get_preamble,
8155 #ifdef CONFIG_IPW2100_MONITOR
8156 ipw2100_wx_set_crc_check,
8157 ipw2100_wx_get_crc_check,
8158 #else /* CONFIG_IPW2100_MONITOR */
8159 NULL,
8160 NULL,
8161 #endif /* CONFIG_IPW2100_MONITOR */
8165 * Get wireless statistics.
8166 * Called by /proc/net/wireless
8167 * Also called by SIOCGIWSTATS
8169 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
8171 enum {
8172 POOR = 30,
8173 FAIR = 60,
8174 GOOD = 80,
8175 VERY_GOOD = 90,
8176 EXCELLENT = 95,
8177 PERFECT = 100
8179 int rssi_qual;
8180 int tx_qual;
8181 int beacon_qual;
8182 int quality;
8184 struct ipw2100_priv *priv = libipw_priv(dev);
8185 struct iw_statistics *wstats;
8186 u32 rssi, tx_retries, missed_beacons, tx_failures;
8187 u32 ord_len = sizeof(u32);
8189 if (!priv)
8190 return (struct iw_statistics *)NULL;
8192 wstats = &priv->wstats;
8194 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8195 * ipw2100_wx_wireless_stats seems to be called before fw is
8196 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8197 * and associated; if not associcated, the values are all meaningless
8198 * anyway, so set them all to NULL and INVALID */
8199 if (!(priv->status & STATUS_ASSOCIATED)) {
8200 wstats->miss.beacon = 0;
8201 wstats->discard.retries = 0;
8202 wstats->qual.qual = 0;
8203 wstats->qual.level = 0;
8204 wstats->qual.noise = 0;
8205 wstats->qual.updated = 7;
8206 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8207 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8208 return wstats;
8211 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8212 &missed_beacons, &ord_len))
8213 goto fail_get_ordinal;
8215 /* If we don't have a connection the quality and level is 0 */
8216 if (!(priv->status & STATUS_ASSOCIATED)) {
8217 wstats->qual.qual = 0;
8218 wstats->qual.level = 0;
8219 } else {
8220 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8221 &rssi, &ord_len))
8222 goto fail_get_ordinal;
8223 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8224 if (rssi < 10)
8225 rssi_qual = rssi * POOR / 10;
8226 else if (rssi < 15)
8227 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8228 else if (rssi < 20)
8229 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8230 else if (rssi < 30)
8231 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8232 10 + GOOD;
8233 else
8234 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8235 10 + VERY_GOOD;
8237 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8238 &tx_retries, &ord_len))
8239 goto fail_get_ordinal;
8241 if (tx_retries > 75)
8242 tx_qual = (90 - tx_retries) * POOR / 15;
8243 else if (tx_retries > 70)
8244 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8245 else if (tx_retries > 65)
8246 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8247 else if (tx_retries > 50)
8248 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8249 15 + GOOD;
8250 else
8251 tx_qual = (50 - tx_retries) *
8252 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8254 if (missed_beacons > 50)
8255 beacon_qual = (60 - missed_beacons) * POOR / 10;
8256 else if (missed_beacons > 40)
8257 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8258 10 + POOR;
8259 else if (missed_beacons > 32)
8260 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8261 18 + FAIR;
8262 else if (missed_beacons > 20)
8263 beacon_qual = (32 - missed_beacons) *
8264 (VERY_GOOD - GOOD) / 20 + GOOD;
8265 else
8266 beacon_qual = (20 - missed_beacons) *
8267 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8269 quality = min(tx_qual, rssi_qual);
8270 quality = min(beacon_qual, quality);
8272 #ifdef CONFIG_IPW2100_DEBUG
8273 if (beacon_qual == quality)
8274 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8275 else if (tx_qual == quality)
8276 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8277 else if (quality != 100)
8278 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8279 else
8280 IPW_DEBUG_WX("Quality not clamped.\n");
8281 #endif
8283 wstats->qual.qual = quality;
8284 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8287 wstats->qual.noise = 0;
8288 wstats->qual.updated = 7;
8289 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8291 /* FIXME: this is percent and not a # */
8292 wstats->miss.beacon = missed_beacons;
8294 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8295 &tx_failures, &ord_len))
8296 goto fail_get_ordinal;
8297 wstats->discard.retries = tx_failures;
8299 return wstats;
8301 fail_get_ordinal:
8302 IPW_DEBUG_WX("failed querying ordinals.\n");
8304 return (struct iw_statistics *)NULL;
8307 static struct iw_handler_def ipw2100_wx_handler_def = {
8308 .standard = ipw2100_wx_handlers,
8309 .num_standard = ARRAY_SIZE(ipw2100_wx_handlers),
8310 .num_private = ARRAY_SIZE(ipw2100_private_handler),
8311 .num_private_args = ARRAY_SIZE(ipw2100_private_args),
8312 .private = (iw_handler *) ipw2100_private_handler,
8313 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8314 .get_wireless_stats = ipw2100_wx_wireless_stats,
8317 static void ipw2100_wx_event_work(struct work_struct *work)
8319 struct ipw2100_priv *priv =
8320 container_of(work, struct ipw2100_priv, wx_event_work.work);
8321 union iwreq_data wrqu;
8322 unsigned int len = ETH_ALEN;
8324 if (priv->status & STATUS_STOPPING)
8325 return;
8327 mutex_lock(&priv->action_mutex);
8329 IPW_DEBUG_WX("enter\n");
8331 mutex_unlock(&priv->action_mutex);
8333 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8335 /* Fetch BSSID from the hardware */
8336 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8337 priv->status & STATUS_RF_KILL_MASK ||
8338 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8339 &priv->bssid, &len)) {
8340 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8341 } else {
8342 /* We now have the BSSID, so can finish setting to the full
8343 * associated state */
8344 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8345 memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
8346 priv->status &= ~STATUS_ASSOCIATING;
8347 priv->status |= STATUS_ASSOCIATED;
8348 netif_carrier_on(priv->net_dev);
8349 netif_wake_queue(priv->net_dev);
8352 if (!(priv->status & STATUS_ASSOCIATED)) {
8353 IPW_DEBUG_WX("Configuring ESSID\n");
8354 mutex_lock(&priv->action_mutex);
8355 /* This is a disassociation event, so kick the firmware to
8356 * look for another AP */
8357 if (priv->config & CFG_STATIC_ESSID)
8358 ipw2100_set_essid(priv, priv->essid, priv->essid_len,
8360 else
8361 ipw2100_set_essid(priv, NULL, 0, 0);
8362 mutex_unlock(&priv->action_mutex);
8365 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8368 #define IPW2100_FW_MAJOR_VERSION 1
8369 #define IPW2100_FW_MINOR_VERSION 3
8371 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8372 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8374 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8375 IPW2100_FW_MAJOR_VERSION)
8377 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8378 "." __stringify(IPW2100_FW_MINOR_VERSION)
8380 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8384 BINARY FIRMWARE HEADER FORMAT
8386 offset length desc
8387 0 2 version
8388 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8389 4 4 fw_len
8390 8 4 uc_len
8391 C fw_len firmware data
8392 12 + fw_len uc_len microcode data
8396 struct ipw2100_fw_header {
8397 short version;
8398 short mode;
8399 unsigned int fw_size;
8400 unsigned int uc_size;
8401 } __attribute__ ((packed));
8403 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8405 struct ipw2100_fw_header *h =
8406 (struct ipw2100_fw_header *)fw->fw_entry->data;
8408 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8409 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8410 "(detected version id of %u). "
8411 "See Documentation/networking/README.ipw2100\n",
8412 h->version);
8413 return 1;
8416 fw->version = h->version;
8417 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8418 fw->fw.size = h->fw_size;
8419 fw->uc.data = fw->fw.data + h->fw_size;
8420 fw->uc.size = h->uc_size;
8422 return 0;
8425 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8426 struct ipw2100_fw *fw)
8428 char *fw_name;
8429 int rc;
8431 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8432 priv->net_dev->name);
8434 switch (priv->ieee->iw_mode) {
8435 case IW_MODE_ADHOC:
8436 fw_name = IPW2100_FW_NAME("-i");
8437 break;
8438 #ifdef CONFIG_IPW2100_MONITOR
8439 case IW_MODE_MONITOR:
8440 fw_name = IPW2100_FW_NAME("-p");
8441 break;
8442 #endif
8443 case IW_MODE_INFRA:
8444 default:
8445 fw_name = IPW2100_FW_NAME("");
8446 break;
8449 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8451 if (rc < 0) {
8452 printk(KERN_ERR DRV_NAME ": "
8453 "%s: Firmware '%s' not available or load failed.\n",
8454 priv->net_dev->name, fw_name);
8455 return rc;
8457 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8458 fw->fw_entry->size);
8460 ipw2100_mod_firmware_load(fw);
8462 return 0;
8465 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8466 #ifdef CONFIG_IPW2100_MONITOR
8467 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8468 #endif
8469 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8471 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8472 struct ipw2100_fw *fw)
8474 fw->version = 0;
8475 if (fw->fw_entry)
8476 release_firmware(fw->fw_entry);
8477 fw->fw_entry = NULL;
8480 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8481 size_t max)
8483 char ver[MAX_FW_VERSION_LEN];
8484 u32 len = MAX_FW_VERSION_LEN;
8485 u32 tmp;
8486 int i;
8487 /* firmware version is an ascii string (max len of 14) */
8488 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
8489 return -EIO;
8490 tmp = max;
8491 if (len >= max)
8492 len = max - 1;
8493 for (i = 0; i < len; i++)
8494 buf[i] = ver[i];
8495 buf[i] = '\0';
8496 return tmp;
8499 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8500 size_t max)
8502 u32 ver;
8503 u32 len = sizeof(ver);
8504 /* microcode version is a 32 bit integer */
8505 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
8506 return -EIO;
8507 return snprintf(buf, max, "%08X", ver);
8511 * On exit, the firmware will have been freed from the fw list
8513 static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
8515 /* firmware is constructed of N contiguous entries, each entry is
8516 * structured as:
8518 * offset sie desc
8519 * 0 4 address to write to
8520 * 4 2 length of data run
8521 * 6 length data
8523 unsigned int addr;
8524 unsigned short len;
8526 const unsigned char *firmware_data = fw->fw.data;
8527 unsigned int firmware_data_left = fw->fw.size;
8529 while (firmware_data_left > 0) {
8530 addr = *(u32 *) (firmware_data);
8531 firmware_data += 4;
8532 firmware_data_left -= 4;
8534 len = *(u16 *) (firmware_data);
8535 firmware_data += 2;
8536 firmware_data_left -= 2;
8538 if (len > 32) {
8539 printk(KERN_ERR DRV_NAME ": "
8540 "Invalid firmware run-length of %d bytes\n",
8541 len);
8542 return -EINVAL;
8545 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8546 firmware_data += len;
8547 firmware_data_left -= len;
8550 return 0;
8553 struct symbol_alive_response {
8554 u8 cmd_id;
8555 u8 seq_num;
8556 u8 ucode_rev;
8557 u8 eeprom_valid;
8558 u16 valid_flags;
8559 u8 IEEE_addr[6];
8560 u16 flags;
8561 u16 pcb_rev;
8562 u16 clock_settle_time; // 1us LSB
8563 u16 powerup_settle_time; // 1us LSB
8564 u16 hop_settle_time; // 1us LSB
8565 u8 date[3]; // month, day, year
8566 u8 time[2]; // hours, minutes
8567 u8 ucode_valid;
8570 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8571 struct ipw2100_fw *fw)
8573 struct net_device *dev = priv->net_dev;
8574 const unsigned char *microcode_data = fw->uc.data;
8575 unsigned int microcode_data_left = fw->uc.size;
8576 void __iomem *reg = (void __iomem *)dev->base_addr;
8578 struct symbol_alive_response response;
8579 int i, j;
8580 u8 data;
8582 /* Symbol control */
8583 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8584 readl(reg);
8585 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8586 readl(reg);
8588 /* HW config */
8589 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8590 readl(reg);
8591 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8592 readl(reg);
8594 /* EN_CS_ACCESS bit to reset control store pointer */
8595 write_nic_byte(dev, 0x210000, 0x40);
8596 readl(reg);
8597 write_nic_byte(dev, 0x210000, 0x0);
8598 readl(reg);
8599 write_nic_byte(dev, 0x210000, 0x40);
8600 readl(reg);
8602 /* copy microcode from buffer into Symbol */
8604 while (microcode_data_left > 0) {
8605 write_nic_byte(dev, 0x210010, *microcode_data++);
8606 write_nic_byte(dev, 0x210010, *microcode_data++);
8607 microcode_data_left -= 2;
8610 /* EN_CS_ACCESS bit to reset the control store pointer */
8611 write_nic_byte(dev, 0x210000, 0x0);
8612 readl(reg);
8614 /* Enable System (Reg 0)
8615 * first enable causes garbage in RX FIFO */
8616 write_nic_byte(dev, 0x210000, 0x0);
8617 readl(reg);
8618 write_nic_byte(dev, 0x210000, 0x80);
8619 readl(reg);
8621 /* Reset External Baseband Reg */
8622 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8623 readl(reg);
8624 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8625 readl(reg);
8627 /* HW Config (Reg 5) */
8628 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8629 readl(reg);
8630 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8631 readl(reg);
8633 /* Enable System (Reg 0)
8634 * second enable should be OK */
8635 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8636 readl(reg);
8637 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8639 /* check Symbol is enabled - upped this from 5 as it wasn't always
8640 * catching the update */
8641 for (i = 0; i < 10; i++) {
8642 udelay(10);
8644 /* check Dino is enabled bit */
8645 read_nic_byte(dev, 0x210000, &data);
8646 if (data & 0x1)
8647 break;
8650 if (i == 10) {
8651 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8652 dev->name);
8653 return -EIO;
8656 /* Get Symbol alive response */
8657 for (i = 0; i < 30; i++) {
8658 /* Read alive response structure */
8659 for (j = 0;
8660 j < (sizeof(struct symbol_alive_response) >> 1); j++)
8661 read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
8663 if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
8664 break;
8665 udelay(10);
8668 if (i == 30) {
8669 printk(KERN_ERR DRV_NAME
8670 ": %s: No response from Symbol - hw not alive\n",
8671 dev->name);
8672 printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));
8673 return -EIO;
8676 return 0;