drivers/infiniband/hw/ipath/ipath_diag.c

   1 /*
   2  * Copyright (c) 2006 QLogic, Inc. All rights reserved.
   3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   4  *
   5  * This software is available to you under a choice of one of two
   6  * licenses.  You may choose to be licensed under the terms of the GNU
   7  * General Public License (GPL) Version 2, available from the file
   8  * COPYING in the main directory of this source tree, or the
   9  * OpenIB.org BSD license below:
  10  *
  11  *     Redistribution and use in source and binary forms, with or
  12  *     without modification, are permitted provided that the following
  13  *     conditions are met:
  14  *
  15  *      - Redistributions of source code must retain the above
  16  *        copyright notice, this list of conditions and the following
  17  *        disclaimer.
  18  *
  19  *      - Redistributions in binary form must reproduce the above
  20  *        copyright notice, this list of conditions and the following
  21  *        disclaimer in the documentation and/or other materials
  22  *        provided with the distribution.
  23  *
  24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  31  * SOFTWARE.
  32  */
  33
  34 /*
  35  * This file contains support for diagnostic functions.  It is accessed by
  36  * opening the ipath_diag device, normally minor number 129.  Diagnostic use
  37  * of the InfiniPath chip may render the chip or board unusable until the
  38  * driver is unloaded, or in some cases, until the system is rebooted.
  39  *
  40  * Accesses to the chip through this interface are not similar to going
  41  * through the /sys/bus/pci resource mmap interface.
  42  */
  43
  44 #include <linux/pci.h>
  45 #include <asm/uaccess.h>
  46
  47 #include "ipath_common.h"
  48 #include "ipath_kernel.h"
  49 #include "ips_common.h"
  50 #include "ipath_layer.h"
  51
  52 int ipath_diag_inuse;
  53 static int diag_set_link;
  54
  55 static int ipath_diag_open(struct inode *in, struct file *fp);
  56 static int ipath_diag_release(struct inode *in, struct file *fp);
  57 static ssize_t ipath_diag_read(struct file *fp, char __user *data,
  58                                size_t count, loff_t *off);
  59 static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
  60                                 size_t count, loff_t *off);
  61
  62 static struct file_operations diag_file_ops = {
  63         .owner = THIS_MODULE,
  64         .write = ipath_diag_write,
  65         .read = ipath_diag_read,
  66         .open = ipath_diag_open,
  67         .release = ipath_diag_release
  68 };
  69
  70 int ipath_diag_add(struct ipath_devdata *dd)
  71 {
  72         char name[16];
  73
  74         snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
  75
  76         return ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
  77                                &diag_file_ops, &dd->diag_cdev,
  78                                &dd->diag_class_dev);
  79 }
  80
  81 void ipath_diag_remove(struct ipath_devdata *dd)
  82 {
  83         ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_class_dev);
  84 }
  85
  86 /**
  87  * ipath_read_umem64 - read a 64-bit quantity from the chip into user space
  88  * @dd: the infinipath device
  89  * @uaddr: the location to store the data in user memory
  90  * @caddr: the source chip address (full pointer, not offset)
  91  * @count: number of bytes to copy (multiple of 32 bits)
  92  *
  93  * This function also localizes all chip memory accesses.
  94  * The copy should be written such that we read full cacheline packets
  95  * from the chip.  This is usually used for a single qword
  96  *
  97  * NOTE:  This assumes the chip address is 64-bit aligned.
  98  */
  99 static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr,
 100                              const void __iomem *caddr, size_t count)
 101 {
 102         const u64 __iomem *reg_addr = caddr;
 103         const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
 104         int ret;
 105
 106         /* not very efficient, but it works for now */
 107         if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
 108                 ret = -EINVAL;
 109                 goto bail;
 110         }
 111         while (reg_addr < reg_end) {
 112                 u64 data = readq(reg_addr);
 113                 if (copy_to_user(uaddr, &data, sizeof(u64))) {
 114                         ret = -EFAULT;
 115                         goto bail;
 116                 }
 117                 reg_addr++;
 118                 uaddr++;
 119         }
 120         ret = 0;
 121 bail:
 122         return ret;
 123 }
 124
 125 /**
 126  * ipath_write_umem64 - write a 64-bit quantity to the chip from user space
 127  * @dd: the infinipath device
 128  * @caddr: the destination chip address (full pointer, not offset)
 129  * @uaddr: the source of the data in user memory
 130  * @count: the number of bytes to copy (multiple of 32 bits)
 131  *
 132  * This is usually used for a single qword
 133  * NOTE:  This assumes the chip address is 64-bit aligned.
 134  */
 135
 136 static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr,
 137                               const void __user *uaddr, size_t count)
 138 {
 139         u64 __iomem *reg_addr = caddr;
 140         const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
 141         int ret;
 142
 143         /* not very efficient, but it works for now */
 144         if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
 145                 ret = -EINVAL;
 146                 goto bail;
 147         }
 148         while (reg_addr < reg_end) {
 149                 u64 data;
 150                 if (copy_from_user(&data, uaddr, sizeof(data))) {
 151                         ret = -EFAULT;
 152                         goto bail;
 153                 }
 154                 writeq(data, reg_addr);
 155
 156                 reg_addr++;
 157                 uaddr++;
 158         }
 159         ret = 0;
 160 bail:
 161         return ret;
 162 }
 163
 164 /**
 165  * ipath_read_umem32 - read a 32-bit quantity from the chip into user space
 166  * @dd: the infinipath device
 167  * @uaddr: the location to store the data in user memory
 168  * @caddr: the source chip address (full pointer, not offset)
 169  * @count: number of bytes to copy
 170  *
 171  * read 32 bit values, not 64 bit; for memories that only
 172  * support 32 bit reads; usually a single dword.
 173  */
 174 static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr,
 175                              const void __iomem *caddr, size_t count)
 176 {
 177         const u32 __iomem *reg_addr = caddr;
 178         const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
 179         int ret;
 180
 181         if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
 182             reg_end > (u32 __iomem *) dd->ipath_kregend) {
 183                 ret = -EINVAL;
 184                 goto bail;
 185         }
 186         /* not very efficient, but it works for now */
 187         while (reg_addr < reg_end) {
 188                 u32 data = readl(reg_addr);
 189                 if (copy_to_user(uaddr, &data, sizeof(data))) {
 190                         ret = -EFAULT;
 191                         goto bail;
 192                 }
 193
 194                 reg_addr++;
 195                 uaddr++;
 196         }
 197         ret = 0;
 198 bail:
 199         return ret;
 200 }
 201
 202 /**
 203  * ipath_write_umem32 - write a 32-bit quantity to the chip from user space
 204  * @dd: the infinipath device
 205  * @caddr: the destination chip address (full pointer, not offset)
 206  * @uaddr: the source of the data in user memory
 207  * @count: number of bytes to copy
 208  *
 209  * write 32 bit values, not 64 bit; for memories that only
 210  * support 32 bit write; usually a single dword.
 211  */
 212
 213 static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr,
 214                               const void __user *uaddr, size_t count)
 215 {
 216         u32 __iomem *reg_addr = caddr;
 217         const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
 218         int ret;
 219
 220         if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
 221             reg_end > (u32 __iomem *) dd->ipath_kregend) {
 222                 ret = -EINVAL;
 223                 goto bail;
 224         }
 225         while (reg_addr < reg_end) {
 226                 u32 data;
 227                 if (copy_from_user(&data, uaddr, sizeof(data))) {
 228                         ret = -EFAULT;
 229                         goto bail;
 230                 }
 231                 writel(data, reg_addr);
 232
 233                 reg_addr++;
 234                 uaddr++;
 235         }
 236         ret = 0;
 237 bail:
 238         return ret;
 239 }
 240
 241 static int ipath_diag_open(struct inode *in, struct file *fp)
 242 {
 243         int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
 244         struct ipath_devdata *dd;
 245         int ret;
 246
 247         mutex_lock(&ipath_mutex);
 248
 249         if (ipath_diag_inuse) {
 250                 ret = -EBUSY;
 251                 goto bail;
 252         }
 253
 254         dd = ipath_lookup(unit);
 255
 256         if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
 257             !dd->ipath_kregbase) {
 258                 ret = -ENODEV;
 259                 goto bail;
 260         }
 261
 262         fp->private_data = dd;
 263         ipath_diag_inuse = 1;
 264         diag_set_link = 0;
 265         ret = 0;
 266
 267         /* Only expose a way to reset the device if we
 268            make it into diag mode. */
 269         ipath_expose_reset(&dd->pcidev->dev);
 270
 271 bail:
 272         mutex_unlock(&ipath_mutex);
 273
 274         return ret;
 275 }
 276
 277 static int ipath_diag_release(struct inode *in, struct file *fp)
 278 {
 279         mutex_lock(&ipath_mutex);
 280         ipath_diag_inuse = 0;
 281         fp->private_data = NULL;
 282         mutex_unlock(&ipath_mutex);
 283         return 0;
 284 }
 285
 286 static ssize_t ipath_diag_read(struct file *fp, char __user *data,
 287                                size_t count, loff_t *off)
 288 {
 289         struct ipath_devdata *dd = fp->private_data;
 290         void __iomem *kreg_base;
 291         ssize_t ret;
 292
 293         kreg_base = dd->ipath_kregbase;
 294
 295         if (count == 0)
 296                 ret = 0;
 297         else if ((count % 4) || (*off % 4))
 298                 /* address or length is not 32-bit aligned, hence invalid */
 299                 ret = -EINVAL;
 300         else if ((count % 8) || (*off % 8))
 301                 /* address or length not 64-bit aligned; do 32-bit reads */
 302                 ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
 303         else
 304                 ret = ipath_read_umem64(dd, data, kreg_base + *off, count);
 305
 306         if (ret >= 0) {
 307                 *off += count;
 308                 ret = count;
 309         }
 310
 311         return ret;
 312 }
 313
 314 static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
 315                                 size_t count, loff_t *off)
 316 {
 317         struct ipath_devdata *dd = fp->private_data;
 318         void __iomem *kreg_base;
 319         ssize_t ret;
 320
 321         kreg_base = dd->ipath_kregbase;
 322
 323         if (count == 0)
 324                 ret = 0;
 325         else if ((count % 4) || (*off % 4))
 326                 /* address or length is not 32-bit aligned, hence invalid */
 327                 ret = -EINVAL;
 328         else if ((count % 8) || (*off % 8))
 329                 /* address or length not 64-bit aligned; do 32-bit writes */
 330                 ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
 331         else
 332                 ret = ipath_write_umem64(dd, kreg_base + *off, data, count);
 333
 334         if (ret >= 0) {
 335                 *off += count;
 336                 ret = count;
 337         }
 338
 339         return ret;
 340 }