V4L/DVB (3428): drivers/media/dvb/ possible cleanups
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / dvb / b2c2 / flexcop-common.h
blob7d7e1613c5a745036e47f9630a5fdf3026ba778c
1 /*
2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-common.h - common header file for device-specific source files also.
6 * see flexcop.c for copyright information.
7 */
8 #ifndef __FLEXCOP_COMMON_H__
9 #define __FLEXCOP_COMMON_H__
11 #include <linux/config.h>
12 #include <linux/pci.h>
14 #include "flexcop-reg.h"
16 #include "dmxdev.h"
17 #include "dvb_demux.h"
18 #include "dvb_filter.h"
19 #include "dvb_net.h"
20 #include "dvb_frontend.h"
22 #define FC_MAX_FEED 256
24 #ifndef FC_LOG_PREFIX
25 #warning please define a log prefix for your file, using a default one
26 #define FC_LOG_PREFIX "b2c2-undef"
27 #endif
29 /* Steal from usb.h */
30 #undef err
31 #define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
32 #undef info
33 #define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
34 #undef warn
35 #define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
37 struct flexcop_dma {
38 struct pci_dev *pdev;
40 u8 *cpu_addr0;
41 dma_addr_t dma_addr0;
42 u8 *cpu_addr1;
43 dma_addr_t dma_addr1;
44 u32 size; /* size of each address in bytes */
47 /* Control structure for data definitions that are common to
48 * the B2C2-based PCI and USB devices.
50 struct flexcop_device {
51 /* general */
52 struct device *dev; /* for firmware_class */
54 #define FC_STATE_DVB_INIT 0x01
55 #define FC_STATE_I2C_INIT 0x02
56 #define FC_STATE_FE_INIT 0x04
57 int init_state;
59 /* device information */
60 int has_32_hw_pid_filter;
61 flexcop_revision_t rev;
62 flexcop_device_type_t dev_type;
63 flexcop_bus_t bus_type;
65 /* dvb stuff */
66 struct dvb_adapter dvb_adapter;
67 struct dvb_frontend *fe;
68 struct dvb_net dvbnet;
69 struct dvb_demux demux;
70 struct dmxdev dmxdev;
71 struct dmx_frontend hw_frontend;
72 struct dmx_frontend mem_frontend;
73 int (*fe_sleep) (struct dvb_frontend *);
75 struct i2c_adapter i2c_adap;
76 struct semaphore i2c_sem;
78 struct module *owner;
80 /* options and status */
81 int extra_feedcount;
82 int feedcount;
83 int pid_filtering;
84 int fullts_streaming_state;
86 /* bus specific callbacks */
87 flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register);
88 int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
91 int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
92 int (*stream_control) (struct flexcop_device*, int);
94 int (*get_mac_addr) (struct flexcop_device *fc, int extended);
96 void *bus_specific;
99 /* exported prototypes */
101 /* from flexcop.c */
102 void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
103 void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
105 struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
106 void flexcop_device_kfree(struct flexcop_device*);
108 int flexcop_device_initialize(struct flexcop_device*);
109 void flexcop_device_exit(struct flexcop_device *fc);
111 void flexcop_reset_block_300(struct flexcop_device *fc);
113 /* from flexcop-dma.c */
114 int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
115 void flexcop_dma_free(struct flexcop_dma *dma);
117 int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
118 int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
119 int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
120 int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
121 int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
123 /* from flexcop-eeprom.c */
124 /* the PCI part uses this call to get the MAC address, the USB part has its own */
125 int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
127 /* from flexcop-i2c.c */
128 /* the PCI part uses this a i2c_request callback, whereas the usb part has its own
129 * one. We have it in flexcop-i2c.c, because it is going via the actual
130 * I2C-channel of the flexcop.
132 int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
133 flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
135 /* from flexcop-sram.c */
136 int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
137 void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
138 void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
140 /* global prototypes for the flexcop-chip */
141 /* from flexcop-fe-tuner.c */
142 int flexcop_frontend_init(struct flexcop_device *card);
143 void flexcop_frontend_exit(struct flexcop_device *fc);
145 /* from flexcop-i2c.c */
146 int flexcop_i2c_init(struct flexcop_device *fc);
147 void flexcop_i2c_exit(struct flexcop_device *fc);
149 /* from flexcop-sram.c */
150 int flexcop_sram_init(struct flexcop_device *fc);
152 /* from flexcop-misc.c */
153 void flexcop_determine_revision(struct flexcop_device *fc);
154 void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
155 void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num);
157 /* from flexcop-hw-filter.c */
158 int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
159 void flexcop_hw_filter_init(struct flexcop_device *fc);
161 void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
163 void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
164 void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
166 #endif