TOMOYO: Split file access control functions by type of parameters.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / edac / amd8131_edac.h
blob60e0d1c72dee14750ac8d05a9ab16fa42bd20fb5
1 /*
2 * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip
4 * Copyright (c) 2008 Wind River Systems, Inc.
6 * Authors: Cao Qingtao <qingtao.cao@windriver.com>
7 * Benjamin Walsh <benjamin.walsh@windriver.com>
8 * Hu Yongqi <yongqi.hu@windriver.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
17 * See the GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #ifndef _AMD8131_EDAC_H_
25 #define _AMD8131_EDAC_H_
27 #define DEVFN_PCIX_BRIDGE_NORTH_A 8
28 #define DEVFN_PCIX_BRIDGE_NORTH_B 16
29 #define DEVFN_PCIX_BRIDGE_SOUTH_A 24
30 #define DEVFN_PCIX_BRIDGE_SOUTH_B 32
32 /************************************************************
33 * PCI-X Bridge Status and Command Register, DevA:0x04
34 ************************************************************/
35 #define REG_STS_CMD 0x04
36 enum sts_cmd_bits {
37 STS_CMD_SSE = BIT(30),
38 STS_CMD_SERREN = BIT(8)
41 /************************************************************
42 * PCI-X Bridge Interrupt and Bridge Control Register,
43 ************************************************************/
44 #define REG_INT_CTLR 0x3c
45 enum int_ctlr_bits {
46 INT_CTLR_DTSE = BIT(27),
47 INT_CTLR_DTS = BIT(26),
48 INT_CTLR_SERR = BIT(17),
49 INT_CTLR_PERR = BIT(16)
52 /************************************************************
53 * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C
54 ************************************************************/
55 #define REG_MEM_LIM 0x1c
56 enum mem_limit_bits {
57 MEM_LIMIT_DPE = BIT(31),
58 MEM_LIMIT_RSE = BIT(30),
59 MEM_LIMIT_RMA = BIT(29),
60 MEM_LIMIT_RTA = BIT(28),
61 MEM_LIMIT_STA = BIT(27),
62 MEM_LIMIT_MDPE = BIT(24),
63 MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA|
64 MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE
67 /************************************************************
68 * Link Configuration And Control Register, side A
69 ************************************************************/
70 #define REG_LNK_CTRL_A 0xc4
72 /************************************************************
73 * Link Configuration And Control Register, side B
74 ************************************************************/
75 #define REG_LNK_CTRL_B 0xc8
77 enum lnk_ctrl_bits {
78 LNK_CTRL_CRCERR_A = BIT(9),
79 LNK_CTRL_CRCERR_B = BIT(8),
80 LNK_CTRL_CRCFEN = BIT(1)
83 enum pcix_bridge_inst {
84 NORTH_A = 0,
85 NORTH_B = 1,
86 SOUTH_A = 2,
87 SOUTH_B = 3,
88 NO_BRIDGE = 4
91 struct amd8131_dev_info {
92 int devfn;
93 enum pcix_bridge_inst inst;
94 struct pci_dev *dev;
95 int edac_idx; /* pci device index */
96 char *ctl_name;
97 struct edac_pci_ctl_info *edac_dev;
101 * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
102 * Controler, and ATCA-6101 has two AMD8131 chipsets, so there are
103 * four PCIX Bridges on ATCA-6101 altogether.
105 * These PCIX Bridges share the same PCI Device ID and are all of
106 * Function Zero, they could be discrimated by their pci_dev->devfn.
107 * They share the same set of init/check/exit methods, and their
108 * private structures are collected in the devices[] array.
110 struct amd8131_info {
111 u16 err_dev; /* PCI Device ID for AMD8131 APIC*/
112 struct amd8131_dev_info *devices;
113 void (*init)(struct amd8131_dev_info *dev_info);
114 void (*exit)(struct amd8131_dev_info *dev_info);
115 void (*check)(struct edac_pci_ctl_info *edac_dev);
118 #endif /* _AMD8131_EDAC_H_ */