include/acpi/actypes.h

   1 /******************************************************************************
   2  *
   3  * Name: actypes.h - Common data types for the entire ACPI subsystem
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2010, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACTYPES_H__
  45 #define __ACTYPES_H__
  46
  47 /* acpisrc:struct_defs -- for acpisrc conversion */
  48
  49 /*
  50  * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
  51  * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
  52  * 12/2006.
  53  */
  54 #ifndef ACPI_MACHINE_WIDTH
  55 #error ACPI_MACHINE_WIDTH not defined
  56 #endif
  57
  58 /*! [Begin] no source code translation */
  59
  60 /*
  61  * Data type ranges
  62  * Note: These macros are designed to be compiler independent as well as
  63  * working around problems that some 32-bit compilers have with 64-bit
  64  * constants.
  65  */
  66 #define ACPI_UINT8_MAX                  (UINT8) (~((UINT8)  0)) /* 0xFF               */
  67 #define ACPI_UINT16_MAX                 (UINT16)(~((UINT16) 0)) /* 0xFFFF             */
  68 #define ACPI_UINT32_MAX                 (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF         */
  69 #define ACPI_UINT64_MAX                 (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
  70 #define ACPI_ASCII_MAX                  0x7F
  71
  72 /*
  73  * Architecture-specific ACPICA Subsystem Data Types
  74  *
  75  * The goal of these types is to provide source code portability across
  76  * 16-bit, 32-bit, and 64-bit targets.
  77  *
  78  * 1) The following types are of fixed size for all targets (16/32/64):
  79  *
  80  * BOOLEAN      Logical boolean
  81  *
  82  * UINT8        8-bit  (1 byte) unsigned value
  83  * UINT16       16-bit (2 byte) unsigned value
  84  * UINT32       32-bit (4 byte) unsigned value
  85  * UINT64       64-bit (8 byte) unsigned value
  86  *
  87  * INT16        16-bit (2 byte) signed value
  88  * INT32        32-bit (4 byte) signed value
  89  * INT64        64-bit (8 byte) signed value
  90  *
  91  * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the
  92  * compiler-dependent header(s) and were introduced because there is no common
  93  * 64-bit integer type across the various compilation models, as shown in
  94  * the table below.
  95  *
  96  * Datatype  LP64 ILP64 LLP64 ILP32 LP32 16bit
  97  * char      8    8     8     8     8    8
  98  * short     16   16    16    16    16   16
  99  * _int32         32
 100  * int       32   64    32    32    16   16
 101  * long      64   64    32    32    32   32
 102  * long long            64    64
 103  * pointer   64   64    64    32    32   32
 104  *
 105  * Note: ILP64 and LP32 are currently not supported.
 106  *
 107  *
 108  * 2) These types represent the native word size of the target mode of the
 109  * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
 110  * usually used for memory allocation, efficient loop counters, and array
 111  * indexes. The types are similar to the size_t type in the C library and are
 112  * required because there is no C type that consistently represents the native
 113  * data width. ACPI_SIZE is needed because there is no guarantee that a
 114  * kernel-level C library is present.
 115  *
 116  * ACPI_SIZE        16/32/64-bit unsigned value
 117  * ACPI_NATIVE_INT  16/32/64-bit signed value
 118  *
 119  */
 120
 121 /*******************************************************************************
 122  *
 123  * Common types for all compilers, all targets
 124  *
 125  ******************************************************************************/
 126
 127 typedef unsigned char BOOLEAN;
 128 typedef unsigned char UINT8;
 129 typedef unsigned short UINT16;
 130 typedef COMPILER_DEPENDENT_UINT64 UINT64;
 131 typedef COMPILER_DEPENDENT_INT64 INT64;
 132
 133 /*! [End] no source code translation !*/
 134
 135 /*******************************************************************************
 136  *
 137  * Types specific to 64-bit targets
 138  *
 139  ******************************************************************************/
 140
 141 #if ACPI_MACHINE_WIDTH == 64
 142
 143 /*! [Begin] no source code translation (keep the typedefs as-is) */
 144
 145 typedef unsigned int UINT32;
 146 typedef int INT32;
 147
 148 /*! [End] no source code translation !*/
 149
 150 typedef s64 acpi_native_int;
 151
 152 typedef u64 acpi_size;
 153 typedef u64 acpi_io_address;
 154 typedef u64 acpi_physical_address;
 155
 156 #define ACPI_MAX_PTR                    ACPI_UINT64_MAX
 157 #define ACPI_SIZE_MAX                   ACPI_UINT64_MAX
 158
 159 #define ACPI_USE_NATIVE_DIVIDE  /* Has native 64-bit integer support */
 160
 161 /*
 162  * In the case of the Itanium Processor Family (IPF), the hardware does not
 163  * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
 164  * to indicate that special precautions must be taken to avoid alignment faults.
 165  * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
 166  *
 167  * Note: Em64_t and other X86-64 processors support misaligned transfers,
 168  * so there is no need to define this flag.
 169  */
 170 #if defined (__IA64__) || defined (__ia64__)
 171 #define ACPI_MISALIGNMENT_NOT_SUPPORTED
 172 #endif
 173
 174 /*******************************************************************************
 175  *
 176  * Types specific to 32-bit targets
 177  *
 178  ******************************************************************************/
 179
 180 #elif ACPI_MACHINE_WIDTH == 32
 181
 182 /*! [Begin] no source code translation (keep the typedefs as-is) */
 183
 184 typedef unsigned int UINT32;
 185 typedef int INT32;
 186
 187 /*! [End] no source code translation !*/
 188
 189 typedef s32 acpi_native_int;
 190
 191 typedef u32 acpi_size;
 192 typedef u32 acpi_io_address;
 193 typedef u32 acpi_physical_address;
 194
 195 #define ACPI_MAX_PTR                    ACPI_UINT32_MAX
 196 #define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
 197
 198 #else
 199
 200 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */
 201
 202 #error unknown ACPI_MACHINE_WIDTH
 203 #endif
 204
 205 /*******************************************************************************
 206  *
 207  * OS-dependent types
 208  *
 209  * If the defaults below are not appropriate for the host system, they can
 210  * be defined in the OS-specific header, and this will take precedence.
 211  *
 212  ******************************************************************************/
 213
 214 /* Value returned by acpi_os_get_thread_id */
 215
 216 #ifndef acpi_thread_id
 217 #define acpi_thread_id                  acpi_size
 218 #endif
 219
 220 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
 221
 222 #ifndef acpi_cpu_flags
 223 #define acpi_cpu_flags                  acpi_size
 224 #endif
 225
 226 /* Object returned from acpi_os_create_cache */
 227
 228 #ifndef acpi_cache_t
 229 #ifdef ACPI_USE_LOCAL_CACHE
 230 #define acpi_cache_t                    struct acpi_memory_list
 231 #else
 232 #define acpi_cache_t                    void *
 233 #endif
 234 #endif
 235
 236 /*
 237  * Synchronization objects - Mutexes, Semaphores, and spin_locks
 238  */
 239 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
 240 /*
 241  * These macros are used if the host OS does not support a mutex object.
 242  * Map the OSL Mutex interfaces to binary semaphores.
 243  */
 244 #define acpi_mutex                      acpi_semaphore
 245 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
 246 #define acpi_os_delete_mutex(handle)    (void) acpi_os_delete_semaphore (handle)
 247 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
 248 #define acpi_os_release_mutex(handle)   (void) acpi_os_signal_semaphore (handle, 1)
 249 #endif
 250
 251 /* Configurable types for synchronization objects */
 252
 253 #ifndef acpi_spinlock
 254 #define acpi_spinlock                   void *
 255 #endif
 256
 257 #ifndef acpi_semaphore
 258 #define acpi_semaphore                  void *
 259 #endif
 260
 261 #ifndef acpi_mutex
 262 #define acpi_mutex                      void *
 263 #endif
 264
 265 /*******************************************************************************
 266  *
 267  * Compiler-dependent types
 268  *
 269  * If the defaults below are not appropriate for the host compiler, they can
 270  * be defined in the compiler-specific header, and this will take precedence.
 271  *
 272  ******************************************************************************/
 273
 274 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
 275
 276 #ifndef acpi_uintptr_t
 277 #define acpi_uintptr_t                  void *
 278 #endif
 279
 280 /*
 281  * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
 282  * some compilers can catch printf format string problems
 283  */
 284 #ifndef ACPI_PRINTF_LIKE
 285 #define ACPI_PRINTF_LIKE(c)
 286 #endif
 287
 288 /*
 289  * Some compilers complain about unused variables. Sometimes we don't want to
 290  * use all the variables (for example, _acpi_module_name). This allows us
 291  * to tell the compiler in a per-variable manner that a variable
 292  * is unused
 293  */
 294 #ifndef ACPI_UNUSED_VAR
 295 #define ACPI_UNUSED_VAR
 296 #endif
 297
 298 /*
 299  * All ACPICA functions that are available to the rest of the kernel are
 300  * tagged with this macro which can be defined as appropriate for the host.
 301  */
 302 #ifndef ACPI_EXPORT_SYMBOL
 303 #define ACPI_EXPORT_SYMBOL(symbol)
 304 #endif
 305
 306 /******************************************************************************
 307  *
 308  * ACPI Specification constants (Do not change unless the specification changes)
 309  *
 310  *****************************************************************************/
 311
 312 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
 313
 314 #define ACPI_MAX_GPE_BLOCKS             2
 315
 316 /* Default ACPI register widths */
 317
 318 #define ACPI_GPE_REGISTER_WIDTH         8
 319 #define ACPI_PM1_REGISTER_WIDTH         16
 320 #define ACPI_PM2_REGISTER_WIDTH         8
 321 #define ACPI_PM_TIMER_WIDTH             32
 322
 323 /* Names within the namespace are 4 bytes long */
 324
 325 #define ACPI_NAME_SIZE                  4
 326 #define ACPI_PATH_SEGMENT_LENGTH        5       /* 4 chars for name + 1 char for separator */
 327 #define ACPI_PATH_SEPARATOR             '.'
 328
 329 /* Sizes for ACPI table headers */
 330
 331 #define ACPI_OEM_ID_SIZE                6
 332 #define ACPI_OEM_TABLE_ID_SIZE          8
 333
 334 /* ACPI/PNP hardware IDs */
 335
 336 #define PCI_ROOT_HID_STRING             "PNP0A03"
 337 #define PCI_EXPRESS_ROOT_HID_STRING     "PNP0A08"
 338
 339 /* PM Timer ticks per second (HZ) */
 340
 341 #define PM_TIMER_FREQUENCY              3579545
 342
 343 /*******************************************************************************
 344  *
 345  * Independent types
 346  *
 347  ******************************************************************************/
 348
 349 /* Logical defines and NULL */
 350
 351 #ifdef FALSE
 352 #undef FALSE
 353 #endif
 354 #define FALSE                           (1 == 0)
 355
 356 #ifdef TRUE
 357 #undef TRUE
 358 #endif
 359 #define TRUE                            (1 == 1)
 360
 361 #ifndef NULL
 362 #define NULL                            (void *) 0
 363 #endif
 364
 365 /*
 366  * Miscellaneous types
 367  */
 368 typedef u32 acpi_status;        /* All ACPI Exceptions */
 369 typedef u32 acpi_name;          /* 4-byte ACPI name */
 370 typedef char *acpi_string;      /* Null terminated ASCII string */
 371 typedef void *acpi_handle;      /* Actually a ptr to a NS Node */
 372
 373 /* Owner IDs are used to track namespace nodes for selective deletion */
 374
 375 typedef u8 acpi_owner_id;
 376 #define ACPI_OWNER_ID_MAX               0xFF
 377
 378 struct uint64_struct {
 379         u32 lo;
 380         u32 hi;
 381 };
 382
 383 union uint64_overlay {
 384         u64 full;
 385         struct uint64_struct part;
 386 };
 387
 388 #define ACPI_INTEGER_BIT_SIZE           64
 389 #define ACPI_MAX_DECIMAL_DIGITS         20      /* 2^64 = 18,446,744,073,709,551,616 */
 390
 391 #if ACPI_MACHINE_WIDTH == 64
 392 #define ACPI_USE_NATIVE_DIVIDE  /* Use compiler native 64-bit divide */
 393 #endif
 394
 395 #define ACPI_MAX64_DECIMAL_DIGITS       20
 396 #define ACPI_MAX32_DECIMAL_DIGITS       10
 397 #define ACPI_MAX16_DECIMAL_DIGITS        5
 398 #define ACPI_MAX8_DECIMAL_DIGITS         3
 399
 400 /* PM Timer ticks per second (HZ) */
 401
 402 #define PM_TIMER_FREQUENCY  3579545
 403
 404 /*
 405  * Constants with special meanings
 406  */
 407 #define ACPI_ROOT_OBJECT                ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
 408 #define ACPI_WAIT_FOREVER               0xFFFF  /* u16, as per ACPI spec */
 409 #define ACPI_DO_NOT_WAIT                0
 410
 411 /*
 412  * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
 413  * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
 414  * pertains to the ACPI integer type only, not to other integers used in the
 415  * implementation of the ACPICA subsystem.
 416  *
 417  * 01/2010: This type is obsolete and has been removed from the entire ACPICA
 418  * code base. It remains here for compatibility with device drivers that use
 419  * the type. However, it will be removed in the future.
 420  */
 421 typedef u64 acpi_integer;
 422 #define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
 423
 424 /*******************************************************************************
 425  *
 426  * Commonly used macros
 427  *
 428  ******************************************************************************/
 429
 430 /* Data manipulation */
 431
 432 #define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
 433 #define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
 434 #define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
 435 #define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
 436 #define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
 437 #define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
 438
 439 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
 440 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
 441 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
 442 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
 443
 444 /* Size calculation */
 445
 446 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
 447
 448 /* Pointer manipulation */
 449
 450 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
 451 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
 452 #define ACPI_ADD_PTR(t, a, b)           ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
 453 #define ACPI_PTR_DIFF(a, b)             (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
 454
 455 /* Pointer/Integer type conversions */
 456
 457 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
 458 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p, (void *) NULL)
 459 #define ACPI_OFFSET(d, f)               (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL)
 460 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 461 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 462
 463 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 464 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
 465 #else
 466 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
 467 #endif
 468
 469 /*******************************************************************************
 470  *
 471  * Miscellaneous constants
 472  *
 473  ******************************************************************************/
 474
 475 /*
 476  * Initialization sequence
 477  */
 478 #define ACPI_FULL_INITIALIZATION        0x00
 479 #define ACPI_NO_ADDRESS_SPACE_INIT      0x01
 480 #define ACPI_NO_HARDWARE_INIT           0x02
 481 #define ACPI_NO_EVENT_INIT              0x04
 482 #define ACPI_NO_HANDLER_INIT            0x08
 483 #define ACPI_NO_ACPI_ENABLE             0x10
 484 #define ACPI_NO_DEVICE_INIT             0x20
 485 #define ACPI_NO_OBJECT_INIT             0x40
 486
 487 /*
 488  * Initialization state
 489  */
 490 #define ACPI_SUBSYSTEM_INITIALIZE       0x01
 491 #define ACPI_INITIALIZED_OK             0x02
 492
 493 /*
 494  * Power state values
 495  */
 496 #define ACPI_STATE_UNKNOWN              (u8) 0xFF
 497
 498 #define ACPI_STATE_S0                   (u8) 0
 499 #define ACPI_STATE_S1                   (u8) 1
 500 #define ACPI_STATE_S2                   (u8) 2
 501 #define ACPI_STATE_S3                   (u8) 3
 502 #define ACPI_STATE_S4                   (u8) 4
 503 #define ACPI_STATE_S5                   (u8) 5
 504 #define ACPI_S_STATES_MAX               ACPI_STATE_S5
 505 #define ACPI_S_STATE_COUNT              6
 506
 507 #define ACPI_STATE_D0                   (u8) 0
 508 #define ACPI_STATE_D1                   (u8) 1
 509 #define ACPI_STATE_D2                   (u8) 2
 510 #define ACPI_STATE_D3                   (u8) 3
 511 #define ACPI_D_STATES_MAX               ACPI_STATE_D3
 512 #define ACPI_D_STATE_COUNT              4
 513
 514 #define ACPI_STATE_C0                   (u8) 0
 515 #define ACPI_STATE_C1                   (u8) 1
 516 #define ACPI_STATE_C2                   (u8) 2
 517 #define ACPI_STATE_C3                   (u8) 3
 518 #define ACPI_C_STATES_MAX               ACPI_STATE_C3
 519 #define ACPI_C_STATE_COUNT              4
 520
 521 /*
 522  * Sleep type invalid value
 523  */
 524 #define ACPI_SLEEP_TYPE_MAX             0x7
 525 #define ACPI_SLEEP_TYPE_INVALID         0xFF
 526
 527 /*
 528  * Standard notify values
 529  */
 530 #define ACPI_NOTIFY_BUS_CHECK           (u8) 0x00
 531 #define ACPI_NOTIFY_DEVICE_CHECK        (u8) 0x01
 532 #define ACPI_NOTIFY_DEVICE_WAKE         (u8) 0x02
 533 #define ACPI_NOTIFY_EJECT_REQUEST       (u8) 0x03
 534 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT  (u8) 0x04
 535 #define ACPI_NOTIFY_FREQUENCY_MISMATCH  (u8) 0x05
 536 #define ACPI_NOTIFY_BUS_MODE_MISMATCH   (u8) 0x06
 537 #define ACPI_NOTIFY_POWER_FAULT         (u8) 0x07
 538 #define ACPI_NOTIFY_CAPABILITIES_CHECK  (u8) 0x08
 539 #define ACPI_NOTIFY_DEVICE_PLD_CHECK    (u8) 0x09
 540 #define ACPI_NOTIFY_RESERVED            (u8) 0x0A
 541 #define ACPI_NOTIFY_LOCALITY_UPDATE     (u8) 0x0B
 542
 543 #define ACPI_NOTIFY_MAX                 0x0B
 544
 545 /*
 546  * Types associated with ACPI names and objects. The first group of
 547  * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
 548  * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
 549  * only add to the first group if the spec changes.
 550  *
 551  * NOTE: Types must be kept in sync with the global acpi_ns_properties
 552  * and acpi_ns_type_names arrays.
 553  */
 554 typedef u32 acpi_object_type;
 555
 556 #define ACPI_TYPE_ANY                   0x00
 557 #define ACPI_TYPE_INTEGER               0x01    /* Byte/Word/Dword/Zero/One/Ones */
 558 #define ACPI_TYPE_STRING                0x02
 559 #define ACPI_TYPE_BUFFER                0x03
 560 #define ACPI_TYPE_PACKAGE               0x04    /* byte_const, multiple data_term/Constant/super_name */
 561 #define ACPI_TYPE_FIELD_UNIT            0x05
 562 #define ACPI_TYPE_DEVICE                0x06    /* Name, multiple Node */
 563 #define ACPI_TYPE_EVENT                 0x07
 564 #define ACPI_TYPE_METHOD                0x08    /* Name, byte_const, multiple Code */
 565 #define ACPI_TYPE_MUTEX                 0x09
 566 #define ACPI_TYPE_REGION                0x0A
 567 #define ACPI_TYPE_POWER                 0x0B    /* Name,byte_const,word_const,multi Node */
 568 #define ACPI_TYPE_PROCESSOR             0x0C    /* Name,byte_const,Dword_const,byte_const,multi nm_o */
 569 #define ACPI_TYPE_THERMAL               0x0D    /* Name, multiple Node */
 570 #define ACPI_TYPE_BUFFER_FIELD          0x0E
 571 #define ACPI_TYPE_DDB_HANDLE            0x0F
 572 #define ACPI_TYPE_DEBUG_OBJECT          0x10
 573
 574 #define ACPI_TYPE_EXTERNAL_MAX          0x10
 575
 576 /*
 577  * These are object types that do not map directly to the ACPI
 578  * object_type() operator. They are used for various internal purposes only.
 579  * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
 580  * internal types must move upwards. (There is code that depends on these
 581  * values being contiguous with the external types above.)
 582  */
 583 #define ACPI_TYPE_LOCAL_REGION_FIELD    0x11
 584 #define ACPI_TYPE_LOCAL_BANK_FIELD      0x12
 585 #define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
 586 #define ACPI_TYPE_LOCAL_REFERENCE       0x14    /* Arg#, Local#, Name, Debug, ref_of, Index */
 587 #define ACPI_TYPE_LOCAL_ALIAS           0x15
 588 #define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
 589 #define ACPI_TYPE_LOCAL_NOTIFY          0x17
 590 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
 591 #define ACPI_TYPE_LOCAL_RESOURCE        0x19
 592 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
 593 #define ACPI_TYPE_LOCAL_SCOPE           0x1B    /* 1 Name, multiple object_list Nodes */
 594
 595 #define ACPI_TYPE_NS_NODE_MAX           0x1B    /* Last typecode used within a NS Node */
 596
 597 /*
 598  * These are special object types that never appear in
 599  * a Namespace node, only in a union acpi_operand_object
 600  */
 601 #define ACPI_TYPE_LOCAL_EXTRA           0x1C
 602 #define ACPI_TYPE_LOCAL_DATA            0x1D
 603
 604 #define ACPI_TYPE_LOCAL_MAX             0x1D
 605
 606 /* All types above here are invalid */
 607
 608 #define ACPI_TYPE_INVALID               0x1E
 609 #define ACPI_TYPE_NOT_FOUND             0xFF
 610
 611 #define ACPI_NUM_NS_TYPES               (ACPI_TYPE_INVALID + 1)
 612
 613 /*
 614  * All I/O
 615  */
 616 #define ACPI_READ                       0
 617 #define ACPI_WRITE                      1
 618 #define ACPI_IO_MASK                    1
 619
 620 /*
 621  * Event Types: Fixed & General Purpose
 622  */
 623 typedef u32 acpi_event_type;
 624
 625 /*
 626  * Fixed events
 627  */
 628 #define ACPI_EVENT_PMTIMER              0
 629 #define ACPI_EVENT_GLOBAL               1
 630 #define ACPI_EVENT_POWER_BUTTON         2
 631 #define ACPI_EVENT_SLEEP_BUTTON         3
 632 #define ACPI_EVENT_RTC                  4
 633 #define ACPI_EVENT_MAX                  4
 634 #define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
 635
 636 /*
 637  * Event Status - Per event
 638  * -------------
 639  * The encoding of acpi_event_status is illustrated below.
 640  * Note that a set bit (1) indicates the property is TRUE
 641  * (e.g. if bit 0 is set then the event is enabled).
 642  * +-------------+-+-+-+
 643  * |   Bits 31:3 |2|1|0|
 644  * +-------------+-+-+-+
 645  *          |     | | |
 646  *          |     | | +- Enabled?
 647  *          |     | +--- Enabled for wake?
 648  *          |     +----- Set?
 649  *          +----------- <Reserved>
 650  */
 651 typedef u32 acpi_event_status;
 652
 653 #define ACPI_EVENT_FLAG_DISABLED        (acpi_event_status) 0x00
 654 #define ACPI_EVENT_FLAG_ENABLED         (acpi_event_status) 0x01
 655 #define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
 656 #define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
 657 #define ACPI_EVENT_FLAG_HANDLE          (acpi_event_status) 0x08
 658
 659 /*
 660  * General Purpose Events (GPE)
 661  */
 662 #define ACPI_GPE_INVALID                0xFF
 663 #define ACPI_GPE_MAX                    0xFF
 664 #define ACPI_NUM_GPE                    256
 665
 666 #define ACPI_GPE_ENABLE                 0
 667 #define ACPI_GPE_DISABLE                1
 668
 669 /*
 670  * GPE info flags - Per GPE
 671  * +-+-+-+---+-+-+-+
 672  * |7|6|5|4:3|2|1|0|
 673  * +-+-+-+---+-+-+-+
 674  *  | | |  |  | | |
 675  *  | | |  |  | | +--- Interrupt type: Edge or Level Triggered
 676  *  | | |  |  | +--- GPE can wake the system
 677  *  | | |  |  +--- Unused
 678  *  | | |  +--- Type of dispatch -- to method, handler, or none
 679  *  | | +--- Unused
 680  *  | +--- Unused
 681  *  +--- Unused
 682  */
 683 #define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x01
 684 #define ACPI_GPE_LEVEL_TRIGGERED        (u8) 0x01
 685 #define ACPI_GPE_EDGE_TRIGGERED         (u8) 0x00
 686
 687 #define ACPI_GPE_TYPE_MASK              (u8) 0x06
 688 #define ACPI_GPE_TYPE_WAKE_RUN          (u8) 0x06
 689 #define ACPI_GPE_TYPE_WAKE              (u8) 0x02
 690 #define ACPI_GPE_TYPE_RUNTIME           (u8) 0x04       /* Default */
 691 #define ACPI_GPE_CAN_WAKE               (u8) 0x02
 692
 693 #define ACPI_GPE_DISPATCH_MASK          (u8) 0x18
 694 #define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x08
 695 #define ACPI_GPE_DISPATCH_METHOD        (u8) 0x10
 696 #define ACPI_GPE_DISPATCH_NOT_USED      (u8) 0x00       /* Default */
 697
 698 /*
 699  * Flags for GPE and Lock interfaces
 700  */
 701 #define ACPI_EVENT_WAKE_ENABLE          0x2     /* acpi_gpe_enable */
 702 #define ACPI_EVENT_WAKE_DISABLE         0x2     /* acpi_gpe_disable */
 703
 704 #define ACPI_NOT_ISR                    0x1
 705 #define ACPI_ISR                        0x0
 706
 707 /* Notify types */
 708
 709 #define ACPI_SYSTEM_NOTIFY              0x1
 710 #define ACPI_DEVICE_NOTIFY              0x2
 711 #define ACPI_ALL_NOTIFY                 (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
 712 #define ACPI_MAX_NOTIFY_HANDLER_TYPE    0x3
 713
 714 #define ACPI_MAX_SYS_NOTIFY             0x7f
 715
 716 /* Address Space (Operation Region) Types */
 717
 718 typedef u8 acpi_adr_space_type;
 719
 720 #define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
 721 #define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
 722 #define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
 723 #define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
 724 #define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
 725 #define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
 726 #define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
 727 #define ACPI_ADR_SPACE_IPMI             (acpi_adr_space_type) 7
 728 #define ACPI_ADR_SPACE_DATA_TABLE       (acpi_adr_space_type) 8
 729 #define ACPI_ADR_SPACE_FIXED_HARDWARE   (acpi_adr_space_type) 127
 730
 731 /*
 732  * bit_register IDs
 733  *
 734  * These values are intended to be used by the hardware interfaces
 735  * and are mapped to individual bitfields defined within the ACPI
 736  * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
 737  * for this mapping.
 738  */
 739
 740 /* PM1 Status register */
 741
 742 #define ACPI_BITREG_TIMER_STATUS                0x00
 743 #define ACPI_BITREG_BUS_MASTER_STATUS           0x01
 744 #define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
 745 #define ACPI_BITREG_POWER_BUTTON_STATUS         0x03
 746 #define ACPI_BITREG_SLEEP_BUTTON_STATUS         0x04
 747 #define ACPI_BITREG_RT_CLOCK_STATUS             0x05
 748 #define ACPI_BITREG_WAKE_STATUS                 0x06
 749 #define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
 750
 751 /* PM1 Enable register */
 752
 753 #define ACPI_BITREG_TIMER_ENABLE                0x08
 754 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
 755 #define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
 756 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
 757 #define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
 758 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0D
 759
 760 /* PM1 Control register */
 761
 762 #define ACPI_BITREG_SCI_ENABLE                  0x0E
 763 #define ACPI_BITREG_BUS_MASTER_RLD              0x0F
 764 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x10
 765 #define ACPI_BITREG_SLEEP_TYPE                  0x11
 766 #define ACPI_BITREG_SLEEP_ENABLE                0x12
 767
 768 /* PM2 Control register */
 769
 770 #define ACPI_BITREG_ARB_DISABLE                 0x13
 771
 772 #define ACPI_BITREG_MAX                         0x13
 773 #define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
 774
 775 /* Status register values. A 1 clears a status bit. 0 = no effect */
 776
 777 #define ACPI_CLEAR_STATUS                       1
 778
 779 /* Enable and Control register values */
 780
 781 #define ACPI_ENABLE_EVENT                       1
 782 #define ACPI_DISABLE_EVENT                      0
 783
 784 /*
 785  * External ACPI object definition
 786  */
 787
 788 /*
 789  * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
 790  * or an unresolved named reference.
 791  */
 792 union acpi_object {
 793         acpi_object_type type;  /* See definition of acpi_ns_type for values */
 794         struct {
 795                 acpi_object_type type;  /* ACPI_TYPE_INTEGER */
 796                 u64 value;      /* The actual number */
 797         } integer;
 798
 799         struct {
 800                 acpi_object_type type;  /* ACPI_TYPE_STRING */
 801                 u32 length;     /* # of bytes in string, excluding trailing null */
 802                 char *pointer;  /* points to the string value */
 803         } string;
 804
 805         struct {
 806                 acpi_object_type type;  /* ACPI_TYPE_BUFFER */
 807                 u32 length;     /* # of bytes in buffer */
 808                 u8 *pointer;    /* points to the buffer */
 809         } buffer;
 810
 811         struct {
 812                 acpi_object_type type;  /* ACPI_TYPE_PACKAGE */
 813                 u32 count;      /* # of elements in package */
 814                 union acpi_object *elements;    /* Pointer to an array of ACPI_OBJECTs */
 815         } package;
 816
 817         struct {
 818                 acpi_object_type type;  /* ACPI_TYPE_LOCAL_REFERENCE */
 819                 acpi_object_type actual_type;   /* Type associated with the Handle */
 820                 acpi_handle handle;     /* object reference */
 821         } reference;
 822
 823         struct {
 824                 acpi_object_type type;  /* ACPI_TYPE_PROCESSOR */
 825                 u32 proc_id;
 826                 acpi_io_address pblk_address;
 827                 u32 pblk_length;
 828         } processor;
 829
 830         struct {
 831                 acpi_object_type type;  /* ACPI_TYPE_POWER */
 832                 u32 system_level;
 833                 u32 resource_order;
 834         } power_resource;
 835 };
 836
 837 /*
 838  * List of objects, used as a parameter list for control method evaluation
 839  */
 840 struct acpi_object_list {
 841         u32 count;
 842         union acpi_object *pointer;
 843 };
 844
 845 /*
 846  * Miscellaneous common Data Structures used by the interfaces
 847  */
 848 #define ACPI_NO_BUFFER              0
 849 #define ACPI_ALLOCATE_BUFFER        (acpi_size) (-1)
 850 #define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (-2)
 851
 852 struct acpi_buffer {
 853         acpi_size length;       /* Length in bytes of the buffer */
 854         void *pointer;          /* pointer to buffer */
 855 };
 856
 857 /*
 858  * name_type for acpi_get_name
 859  */
 860 #define ACPI_FULL_PATHNAME              0
 861 #define ACPI_SINGLE_NAME                1
 862 #define ACPI_NAME_TYPE_MAX              1
 863
 864 /*
 865  * Predefined Namespace items
 866  */
 867 struct acpi_predefined_names {
 868         char *name;
 869         u8 type;
 870         char *val;
 871 };
 872
 873 /*
 874  * Structure and flags for acpi_get_system_info
 875  */
 876 #define ACPI_SYS_MODE_UNKNOWN           0x0000
 877 #define ACPI_SYS_MODE_ACPI              0x0001
 878 #define ACPI_SYS_MODE_LEGACY            0x0002
 879 #define ACPI_SYS_MODES_MASK             0x0003
 880
 881 /*
 882  * System info returned by acpi_get_system_info()
 883  */
 884 struct acpi_system_info {
 885         u32 acpi_ca_version;
 886         u32 flags;
 887         u32 timer_resolution;
 888         u32 reserved1;
 889         u32 reserved2;
 890         u32 debug_level;
 891         u32 debug_layer;
 892 };
 893
 894 /* Table Event Types */
 895
 896 #define ACPI_TABLE_EVENT_LOAD           0x0
 897 #define ACPI_TABLE_EVENT_UNLOAD         0x1
 898 #define ACPI_NUM_TABLE_EVENTS           2
 899
 900 /*
 901  * Types specific to the OS service interfaces
 902  */
 903 typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
 904
 905 typedef void
 906  (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
 907
 908 /*
 909  * Various handlers and callback procedures
 910  */
 911 typedef u32(*acpi_event_handler) (void *context);
 912
 913 typedef
 914 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
 915
 916 typedef
 917 void (*acpi_object_handler) (acpi_handle object, void *data);
 918
 919 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
 920
 921 #define ACPI_INIT_DEVICE_INI        1
 922
 923 typedef
 924 acpi_status(*acpi_exception_handler) (acpi_status aml_status,
 925                                       acpi_name name,
 926                                       u16 opcode,
 927                                       u32 aml_offset, void *context);
 928
 929 /* Table Event handler (Load, load_table, etc.) and types */
 930
 931 typedef
 932 acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context);
 933
 934 /* Address Spaces (For Operation Regions) */
 935
 936 typedef
 937 acpi_status(*acpi_adr_space_handler) (u32 function,
 938                                       acpi_physical_address address,
 939                                       u32 bit_width,
 940                                       u64 *value,
 941                                       void *handler_context,
 942                                       void *region_context);
 943
 944 #define ACPI_DEFAULT_HANDLER            NULL
 945
 946 typedef
 947 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle,
 948                                     u32 function,
 949                                     void *handler_context,
 950                                     void **region_context);
 951
 952 #define ACPI_REGION_ACTIVATE    0
 953 #define ACPI_REGION_DEACTIVATE  1
 954
 955 typedef
 956 acpi_status(*acpi_walk_callback) (acpi_handle obj_handle,
 957                                   u32 nesting_level,
 958                                   void *context, void **return_value);
 959
 960 /* Interrupt handler return values */
 961
 962 #define ACPI_INTERRUPT_NOT_HANDLED      0x00
 963 #define ACPI_INTERRUPT_HANDLED          0x01
 964
 965 /* Length of 32-bit EISAID values when converted back to a string */
 966
 967 #define ACPI_EISAID_STRING_SIZE         8       /* Includes null terminator */
 968
 969 /* Length of UUID (string) values */
 970
 971 #define ACPI_UUID_LENGTH                16
 972
 973 /* Structures used for device/processor HID, UID, CID */
 974
 975 struct acpica_device_id {
 976         u32 length;             /* Length of string + null */
 977         char *string;
 978 };
 979
 980 struct acpica_device_id_list {
 981         u32 count;              /* Number of IDs in Ids array */
 982         u32 list_size;          /* Size of list, including ID strings */
 983         struct acpica_device_id ids[1]; /* ID array */
 984 };
 985
 986 /*
 987  * Structure returned from acpi_get_object_info.
 988  * Optimized for both 32- and 64-bit builds
 989  */
 990 struct acpi_device_info {
 991         u32 info_size;          /* Size of info, including ID strings */
 992         u32 name;               /* ACPI object Name */
 993         acpi_object_type type;  /* ACPI object Type */
 994         u8 param_count;         /* If a method, required parameter count */
 995         u8 valid;               /* Indicates which optional fields are valid */
 996         u8 flags;               /* Miscellaneous info */
 997         u8 highest_dstates[4];  /* _sx_d values: 0xFF indicates not valid */
 998         u8 lowest_dstates[5];   /* _sx_w values: 0xFF indicates not valid */
 999         u32 current_status;     /* _STA value */
1000         u64 address;    /* _ADR value */
1001         struct acpica_device_id hardware_id;    /* _HID value */
1002         struct acpica_device_id unique_id;      /* _UID value */
1003         struct acpica_device_id_list compatible_id_list;        /* _CID list <must be last> */
1004 };
1005
1006 /* Values for Flags field above (acpi_get_object_info) */
1007
1008 #define ACPI_PCI_ROOT_BRIDGE            0x01
1009
1010 /* Flags for Valid field above (acpi_get_object_info) */
1011
1012 #define ACPI_VALID_STA                  0x01
1013 #define ACPI_VALID_ADR                  0x02
1014 #define ACPI_VALID_HID                  0x04
1015 #define ACPI_VALID_UID                  0x08
1016 #define ACPI_VALID_CID                  0x10
1017 #define ACPI_VALID_SXDS                 0x20
1018 #define ACPI_VALID_SXWS                 0x40
1019
1020 /* Flags for _STA method */
1021
1022 #define ACPI_STA_DEVICE_PRESENT         0x01
1023 #define ACPI_STA_DEVICE_ENABLED         0x02
1024 #define ACPI_STA_DEVICE_UI              0x04
1025 #define ACPI_STA_DEVICE_FUNCTIONING     0x08
1026 #define ACPI_STA_DEVICE_OK              0x08    /* Synonym */
1027 #define ACPI_STA_BATTERY_PRESENT        0x10
1028
1029 /* Context structs for address space handlers */
1030
1031 struct acpi_pci_id {
1032         u16 segment;
1033         u16 bus;
1034         u16 device;
1035         u16 function;
1036 };
1037
1038 struct acpi_mem_space_context {
1039         u32 length;
1040         acpi_physical_address address;
1041         acpi_physical_address mapped_physical_address;
1042         u8 *mapped_logical_address;
1043         acpi_size mapped_length;
1044 };
1045
1046 /*
1047  * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1048  */
1049 struct acpi_memory_list {
1050         char *list_name;
1051         void *list_head;
1052         u16 object_size;
1053         u16 max_depth;
1054         u16 current_depth;
1055         u16 link_offset;
1056
1057 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
1058
1059         /* Statistics for debug memory tracking only */
1060
1061         u32 total_allocated;
1062         u32 total_freed;
1063         u32 max_occupied;
1064         u32 total_size;
1065         u32 current_total_size;
1066         u32 requests;
1067         u32 hits;
1068 #endif
1069 };
1070
1071 #endif                          /* __ACTYPES_H__ */