| blob | 5ecf54cfa7d47d774c78c754e08e7713edb214cc |
1 /*
2 * Kernel execution entry point code.
3 *
4 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
5 * Initial PowerPC version.
6 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
7 * Rewritten for PReP
8 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
9 * Low-level exception handers, MMU support, and rewrite.
10 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
11 * PowerPC 8xx modifications.
12 * Copyright (c) 1998-1999 TiVo, Inc.
13 * PowerPC 403GCX modifications.
14 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
15 * PowerPC 403GCX/405GP modifications.
16 * Copyright 2000 MontaVista Software Inc.
17 * PPC405 modifications
18 * PowerPC 403GCX/405GP modifications.
19 * Author: MontaVista Software, Inc.
20 * frank_rowand@mvista.com or source@mvista.com
21 * debbie_chu@mvista.com
22 * Copyright 2002-2004 MontaVista Software, Inc.
23 * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
24 * Copyright 2004 Freescale Semiconductor, Inc
25 * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
26 *
27 * This program is free software; you can redistribute it and/or modify it
28 * under the terms of the GNU General Public License as published by the
29 * Free Software Foundation; either version 2 of the License, or (at your
30 * option) any later version.
31 */
33 #include <linux/init.h>
34 #include <linux/threads.h>
35 #include <asm/processor.h>
36 #include <asm/page.h>
37 #include <asm/mmu.h>
38 #include <asm/pgtable.h>
39 #include <asm/cputable.h>
40 #include <asm/thread_info.h>
41 #include <asm/ppc_asm.h>
42 #include <asm/asm-offsets.h>
43 #include <asm/cache.h>
44 #include <asm/ptrace.h>
45 #include "head_booke.h"
47 /* As with the other PowerPC ports, it is expected that when code
48 * execution begins here, the following registers contain valid, yet
49 * optional, information:
50 *
51 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
52 * r4 - Starting address of the init RAM disk
53 * r5 - Ending address of the init RAM disk
54 * r6 - Start of kernel command line string (e.g. "mem=128")
55 * r7 - End of kernel command line string
56 *
57 */
58 __HEAD
59 _ENTRY(_stext);
60 _ENTRY(_start);
61 /*
62 * Reserve a word at a fixed location to store the address
63 * of abatron_pteptrs
64 */
65 nop
66 /*
67 * Save parameters we are passed
68 */
69 mr r31,r3
70 mr r30,r4
71 mr r29,r5
72 mr r28,r6
73 mr r27,r7
74 li r25,0 /* phys kernel start (low) */
75 li r24,0 /* CPU number */
76 li r23,0 /* phys kernel start (high) */
78 /* We try to not make any assumptions about how the boot loader
79 * setup or used the TLBs. We invalidate all mappings from the
80 * boot loader and load a single entry in TLB1[0] to map the
81 * first 64M of kernel memory. Any boot info passed from the
82 * bootloader needs to live in this first 64M.
83 *
84 * Requirement on bootloader:
85 * - The page we're executing in needs to reside in TLB1 and
86 * have IPROT=1. If not an invalidate broadcast could
87 * evict the entry we're currently executing in.
88 *
89 * r3 = Index of TLB1 were executing in
90 * r4 = Current MSR[IS]
91 * r5 = Index of TLB1 temp mapping
92 *
93 * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
94 * if needed
95 */
97 _ENTRY(__early_start)
99 #define ENTRY_MAPPING_BOOT_SETUP
100 #include "fsl_booke_entry_mapping.S"
101 #undef ENTRY_MAPPING_BOOT_SETUP
103 /* Establish the interrupt vector offsets */
104 SET_IVOR(0, CriticalInput);
105 SET_IVOR(1, MachineCheck);
106 SET_IVOR(2, DataStorage);
107 SET_IVOR(3, InstructionStorage);
108 SET_IVOR(4, ExternalInput);
109 SET_IVOR(5, Alignment);
110 SET_IVOR(6, Program);
111 SET_IVOR(7, FloatingPointUnavailable);
112 SET_IVOR(8, SystemCall);
113 SET_IVOR(9, AuxillaryProcessorUnavailable);
114 SET_IVOR(10, Decrementer);
115 SET_IVOR(11, FixedIntervalTimer);
116 SET_IVOR(12, WatchdogTimer);
117 SET_IVOR(13, DataTLBError);
118 SET_IVOR(14, InstructionTLBError);
119 SET_IVOR(15, DebugCrit);
121 /* Establish the interrupt vector base */
122 lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
123 mtspr SPRN_IVPR,r4
125 /* Setup the defaults for TLB entries */
126 li r2,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
127 #ifdef CONFIG_E200
128 oris r2,r2,MAS4_TLBSELD(1)@h
129 #endif
130 mtspr SPRN_MAS4, r2
132 #if 0
133 /* Enable DOZE */
134 mfspr r2,SPRN_HID0
135 oris r2,r2,HID0_DOZE@h
136 mtspr SPRN_HID0, r2
137 #endif
139 #if !defined(CONFIG_BDI_SWITCH)
140 /*
141 * The Abatron BDI JTAG debugger does not tolerate others
142 * mucking with the debug registers.
143 */
144 lis r2,DBCR0_IDM@h
145 mtspr SPRN_DBCR0,r2
146 isync
147 /* clear any residual debug events */
148 li r2,-1
149 mtspr SPRN_DBSR,r2
150 #endif
152 #ifdef CONFIG_SMP
153 /* Check to see if we're the second processor, and jump
154 * to the secondary_start code if so
155 */
156 lis r24, boot_cpuid@h
157 ori r24, r24, boot_cpuid@l
158 lwz r24, 0(r24)
159 cmpwi r24, -1
160 mfspr r24,SPRN_PIR
161 bne __secondary_start
162 #endif
164 /*
165 * This is where the main kernel code starts.
166 */
168 /* ptr to current */
169 lis r2,init_task@h
170 ori r2,r2,init_task@l
172 /* ptr to current thread */
173 addi r4,r2,THREAD /* init task's THREAD */
174 mtspr SPRN_SPRG_THREAD,r4
176 /* stack */
177 lis r1,init_thread_union@h
178 ori r1,r1,init_thread_union@l
179 li r0,0
180 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
182 rlwinm r22,r1,0,0,31-THREAD_SHIFT /* current thread_info */
183 stw r24, TI_CPU(r22)
185 bl early_init
187 #ifdef CONFIG_RELOCATABLE
188 lis r3,kernstart_addr@ha
189 la r3,kernstart_addr@l(r3)
190 #ifdef CONFIG_PHYS_64BIT
191 stw r23,0(r3)
192 stw r25,4(r3)
193 #else
194 stw r25,0(r3)
195 #endif
196 #endif
198 /*
199 * Decide what sort of machine this is and initialize the MMU.
200 */
201 mr r3,r31
202 mr r4,r30
203 mr r5,r29
204 mr r6,r28
205 mr r7,r27
206 bl machine_init
207 bl MMU_init
209 /* Setup PTE pointers for the Abatron bdiGDB */
210 lis r6, swapper_pg_dir@h
211 ori r6, r6, swapper_pg_dir@l
212 lis r5, abatron_pteptrs@h
213 ori r5, r5, abatron_pteptrs@l
214 lis r4, KERNELBASE@h
215 ori r4, r4, KERNELBASE@l
216 stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
217 stw r6, 0(r5)
219 /* Let's move on */
220 lis r4,start_kernel@h
221 ori r4,r4,start_kernel@l
222 lis r3,MSR_KERNEL@h
223 ori r3,r3,MSR_KERNEL@l
224 mtspr SPRN_SRR0,r4
225 mtspr SPRN_SRR1,r3
226 rfi /* change context and jump to start_kernel */
228 /* Macros to hide the PTE size differences
229 *
230 * FIND_PTE -- walks the page tables given EA & pgdir pointer
231 * r10 -- EA of fault
232 * r11 -- PGDIR pointer
233 * r12 -- free
234 * label 2: is the bailout case
235 *
236 * if we find the pte (fall through):
237 * r11 is low pte word
238 * r12 is pointer to the pte
239 */
240 #ifdef CONFIG_PTE_64BIT
241 #define FIND_PTE \
242 rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
243 lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
244 rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \
245 beq 2f; /* Bail if no table */ \
246 rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
247 lwz r11, 4(r12); /* Get pte entry */
248 #else
249 #define FIND_PTE \
250 rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \
251 lwz r11, 0(r11); /* Get L1 entry */ \
252 rlwinm. r12, r11, 0, 0, 19; /* Extract L2 (pte) base address */ \
253 beq 2f; /* Bail if no table */ \
254 rlwimi r12, r10, 22, 20, 29; /* Compute PTE address */ \
255 lwz r11, 0(r12); /* Get Linux PTE */
256 #endif
258 /*
259 * Interrupt vector entry code
260 *
261 * The Book E MMUs are always on so we don't need to handle
262 * interrupts in real mode as with previous PPC processors. In
263 * this case we handle interrupts in the kernel virtual address
264 * space.
265 *
266 * Interrupt vectors are dynamically placed relative to the
267 * interrupt prefix as determined by the address of interrupt_base.
268 * The interrupt vectors offsets are programmed using the labels
269 * for each interrupt vector entry.
270 *
271 * Interrupt vectors must be aligned on a 16 byte boundary.
272 * We align on a 32 byte cache line boundary for good measure.
273 */
275 interrupt_base:
276 /* Critical Input Interrupt */
277 CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
279 /* Machine Check Interrupt */
280 #ifdef CONFIG_E200
281 /* no RFMCI, MCSRRs on E200 */
282 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
283 #else
284 MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
285 #endif
287 /* Data Storage Interrupt */
288 START_EXCEPTION(DataStorage)
289 NORMAL_EXCEPTION_PROLOG
290 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
291 stw r5,_ESR(r11)
292 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
293 andis. r10,r5,(ESR_ILK|ESR_DLK)@h
294 bne 1f
295 EXC_XFER_EE_LITE(0x0300, handle_page_fault)
296 1:
297 addi r3,r1,STACK_FRAME_OVERHEAD
298 EXC_XFER_EE_LITE(0x0300, CacheLockingException)
300 /* Instruction Storage Interrupt */
301 INSTRUCTION_STORAGE_EXCEPTION
303 /* External Input Interrupt */
304 EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
306 /* Alignment Interrupt */
307 ALIGNMENT_EXCEPTION
309 /* Program Interrupt */
310 PROGRAM_EXCEPTION
312 /* Floating Point Unavailable Interrupt */
313 #ifdef CONFIG_PPC_FPU
314 FP_UNAVAILABLE_EXCEPTION
315 #else
316 #ifdef CONFIG_E200
317 /* E200 treats 'normal' floating point instructions as FP Unavail exception */
318 EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE)
319 #else
320 EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
321 #endif
322 #endif
324 /* System Call Interrupt */
325 START_EXCEPTION(SystemCall)
326 NORMAL_EXCEPTION_PROLOG
327 EXC_XFER_EE_LITE(0x0c00, DoSyscall)
329 /* Auxiliary Processor Unavailable Interrupt */
330 EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
332 /* Decrementer Interrupt */
333 DECREMENTER_EXCEPTION
335 /* Fixed Internal Timer Interrupt */
336 /* TODO: Add FIT support */
337 EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
339 /* Watchdog Timer Interrupt */
340 #ifdef CONFIG_BOOKE_WDT
341 CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
342 #else
343 CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception)
344 #endif
346 /* Data TLB Error Interrupt */
347 START_EXCEPTION(DataTLBError)
348 mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
349 mtspr SPRN_SPRG_WSCRATCH1, r11
350 mtspr SPRN_SPRG_WSCRATCH2, r12
351 mtspr SPRN_SPRG_WSCRATCH3, r13
352 mfcr r11
353 mtspr SPRN_SPRG_WSCRATCH4, r11
354 mfspr r10, SPRN_DEAR /* Get faulting address */
356 /* If we are faulting a kernel address, we have to use the
357 * kernel page tables.
358 */
359 lis r11, PAGE_OFFSET@h
360 cmplw 5, r10, r11
361 blt 5, 3f
362 lis r11, swapper_pg_dir@h
363 ori r11, r11, swapper_pg_dir@l
365 mfspr r12,SPRN_MAS1 /* Set TID to 0 */
366 rlwinm r12,r12,0,16,1
367 mtspr SPRN_MAS1,r12
369 b 4f
371 /* Get the PGD for the current thread */
372 3:
373 mfspr r11,SPRN_SPRG_THREAD
374 lwz r11,PGDIR(r11)
376 4:
377 /* Mask of required permission bits. Note that while we
378 * do copy ESR:ST to _PAGE_RW position as trying to write
379 * to an RO page is pretty common, we don't do it with
380 * _PAGE_DIRTY. We could do it, but it's a fairly rare
381 * event so I'd rather take the overhead when it happens
382 * rather than adding an instruction here. We should measure
383 * whether the whole thing is worth it in the first place
384 * as we could avoid loading SPRN_ESR completely in the first
385 * place...
386 *
387 * TODO: Is it worth doing that mfspr & rlwimi in the first
388 * place or can we save a couple of instructions here ?
389 */
390 mfspr r12,SPRN_ESR
391 #ifdef CONFIG_PTE_64BIT
392 li r13,_PAGE_PRESENT
393 oris r13,r13,_PAGE_ACCESSED@h
394 #else
395 li r13,_PAGE_PRESENT|_PAGE_ACCESSED
396 #endif
397 rlwimi r13,r12,11,29,29
399 FIND_PTE
400 andc. r13,r13,r11 /* Check permission */
402 #ifdef CONFIG_PTE_64BIT
403 #ifdef CONFIG_SMP
404 subf r10,r11,r12 /* create false data dep */
405 lwzx r13,r11,r10 /* Get upper pte bits */
406 #else
407 lwz r13,0(r12) /* Get upper pte bits */
408 #endif
409 #endif
411 bne 2f /* Bail if permission/valid mismach */
413 /* Jump to common tlb load */
414 b finish_tlb_load
415 2:
416 /* The bailout. Restore registers to pre-exception conditions
417 * and call the heavyweights to help us out.
418 */
419 mfspr r11, SPRN_SPRG_RSCRATCH4
420 mtcr r11
421 mfspr r13, SPRN_SPRG_RSCRATCH3
422 mfspr r12, SPRN_SPRG_RSCRATCH2
423 mfspr r11, SPRN_SPRG_RSCRATCH1
424 mfspr r10, SPRN_SPRG_RSCRATCH0
425 b DataStorage
427 /* Instruction TLB Error Interrupt */
428 /*
429 * Nearly the same as above, except we get our
430 * information from different registers and bailout
431 * to a different point.
432 */
433 START_EXCEPTION(InstructionTLBError)
434 mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
435 mtspr SPRN_SPRG_WSCRATCH1, r11
436 mtspr SPRN_SPRG_WSCRATCH2, r12
437 mtspr SPRN_SPRG_WSCRATCH3, r13
438 mfcr r11
439 mtspr SPRN_SPRG_WSCRATCH4, r11
440 mfspr r10, SPRN_SRR0 /* Get faulting address */
442 /* If we are faulting a kernel address, we have to use the
443 * kernel page tables.
444 */
445 lis r11, PAGE_OFFSET@h
446 cmplw 5, r10, r11
447 blt 5, 3f
448 lis r11, swapper_pg_dir@h
449 ori r11, r11, swapper_pg_dir@l
451 mfspr r12,SPRN_MAS1 /* Set TID to 0 */
452 rlwinm r12,r12,0,16,1
453 mtspr SPRN_MAS1,r12
455 /* Make up the required permissions for kernel code */
456 #ifdef CONFIG_PTE_64BIT
457 li r13,_PAGE_PRESENT | _PAGE_BAP_SX
458 oris r13,r13,_PAGE_ACCESSED@h
459 #else
460 li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
461 #endif
462 b 4f
464 /* Get the PGD for the current thread */
465 3:
466 mfspr r11,SPRN_SPRG_THREAD
467 lwz r11,PGDIR(r11)
469 /* Make up the required permissions for user code */
470 #ifdef CONFIG_PTE_64BIT
471 li r13,_PAGE_PRESENT | _PAGE_BAP_UX
472 oris r13,r13,_PAGE_ACCESSED@h
473 #else
474 li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
475 #endif
477 4:
478 FIND_PTE
479 andc. r13,r13,r11 /* Check permission */
481 #ifdef CONFIG_PTE_64BIT
482 #ifdef CONFIG_SMP
483 subf r10,r11,r12 /* create false data dep */
484 lwzx r13,r11,r10 /* Get upper pte bits */
485 #else
486 lwz r13,0(r12) /* Get upper pte bits */
487 #endif
488 #endif
490 bne 2f /* Bail if permission mismach */
492 /* Jump to common TLB load point */
493 b finish_tlb_load
495 2:
496 /* The bailout. Restore registers to pre-exception conditions
497 * and call the heavyweights to help us out.
498 */
499 mfspr r11, SPRN_SPRG_RSCRATCH4
500 mtcr r11
501 mfspr r13, SPRN_SPRG_RSCRATCH3
502 mfspr r12, SPRN_SPRG_RSCRATCH2
503 mfspr r11, SPRN_SPRG_RSCRATCH1
504 mfspr r10, SPRN_SPRG_RSCRATCH0
505 b InstructionStorage
507 #ifdef CONFIG_SPE
508 /* SPE Unavailable */
509 START_EXCEPTION(SPEUnavailable)
510 NORMAL_EXCEPTION_PROLOG
511 bne load_up_spe
512 addi r3,r1,STACK_FRAME_OVERHEAD
513 EXC_XFER_EE_LITE(0x2010, KernelSPE)
514 #else
515 EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)
516 #endif /* CONFIG_SPE */
518 /* SPE Floating Point Data */
519 #ifdef CONFIG_SPE
520 EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
522 /* SPE Floating Point Round */
523 EXCEPTION(0x2050, SPEFloatingPointRound, SPEFloatingPointRoundException, EXC_XFER_EE)
524 #else
525 EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
526 EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
527 #endif /* CONFIG_SPE */
529 /* Performance Monitor */
530 EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
532 EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD)
534 CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception)
536 /* Debug Interrupt */
537 DEBUG_DEBUG_EXCEPTION
538 DEBUG_CRIT_EXCEPTION
540 /*
541 * Local functions
542 */
544 /*
545 * Both the instruction and data TLB miss get to this
546 * point to load the TLB.
547 * r10 - available to use
548 * r11 - TLB (info from Linux PTE)
549 * r12 - available to use
550 * r13 - upper bits of PTE (if PTE_64BIT) or available to use
551 * CR5 - results of addr >= PAGE_OFFSET
552 * MAS0, MAS1 - loaded with proper value when we get here
553 * MAS2, MAS3 - will need additional info from Linux PTE
554 * Upon exit, we reload everything and RFI.
555 */
556 finish_tlb_load:
557 /*
558 * We set execute, because we don't have the granularity to
559 * properly set this at the page level (Linux problem).
560 * Many of these bits are software only. Bits we don't set
561 * here we (properly should) assume have the appropriate value.
562 */
564 mfspr r12, SPRN_MAS2
565 #ifdef CONFIG_PTE_64BIT
566 rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
567 #else
568 rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
569 #endif
570 mtspr SPRN_MAS2, r12
572 #ifdef CONFIG_PTE_64BIT
573 rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */
574 andi. r10, r11, _PAGE_DIRTY
575 bne 1f
576 li r10, MAS3_SW | MAS3_UW
577 andc r12, r12, r10
578 1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */
579 rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */
580 mtspr SPRN_MAS3, r12
581 BEGIN_MMU_FTR_SECTION
582 srwi r10, r13, 12 /* grab RPN[12:31] */
583 mtspr SPRN_MAS7, r10
584 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
585 #else
586 li r10, (_PAGE_EXEC | _PAGE_PRESENT)
587 rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
588 and r12, r11, r10
589 andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
590 slwi r10, r12, 1
591 or r10, r10, r12
592 iseleq r12, r12, r10
593 rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
594 mtspr SPRN_MAS3, r11
595 #endif
596 #ifdef CONFIG_E200
597 /* Round robin TLB1 entries assignment */
598 mfspr r12, SPRN_MAS0
600 /* Extract TLB1CFG(NENTRY) */
601 mfspr r11, SPRN_TLB1CFG
602 andi. r11, r11, 0xfff
604 /* Extract MAS0(NV) */
605 andi. r13, r12, 0xfff
606 addi r13, r13, 1
607 cmpw 0, r13, r11
608 addi r12, r12, 1
610 /* check if we need to wrap */
611 blt 7f
613 /* wrap back to first free tlbcam entry */
614 lis r13, tlbcam_index@ha
615 lwz r13, tlbcam_index@l(r13)
616 rlwimi r12, r13, 0, 20, 31
617 7:
618 mtspr SPRN_MAS0,r12
619 #endif /* CONFIG_E200 */
621 tlbwe
623 /* Done...restore registers and get out of here. */
624 mfspr r11, SPRN_SPRG_RSCRATCH4
625 mtcr r11
626 mfspr r13, SPRN_SPRG_RSCRATCH3
627 mfspr r12, SPRN_SPRG_RSCRATCH2
628 mfspr r11, SPRN_SPRG_RSCRATCH1
629 mfspr r10, SPRN_SPRG_RSCRATCH0
630 rfi /* Force context change */
632 #ifdef CONFIG_SPE
633 /* Note that the SPE support is closely modeled after the AltiVec
634 * support. Changes to one are likely to be applicable to the
635 * other! */
636 load_up_spe:
637 /*
638 * Disable SPE for the task which had SPE previously,
639 * and save its SPE registers in its thread_struct.
640 * Enables SPE for use in the kernel on return.
641 * On SMP we know the SPE units are free, since we give it up every
642 * switch. -- Kumar
643 */
644 mfmsr r5
645 oris r5,r5,MSR_SPE@h
646 mtmsr r5 /* enable use of SPE now */
647 isync
648 /*
649 * For SMP, we don't do lazy SPE switching because it just gets too
650 * horrendously complex, especially when a task switches from one CPU
651 * to another. Instead we call giveup_spe in switch_to.
652 */
653 #ifndef CONFIG_SMP
654 lis r3,last_task_used_spe@ha
655 lwz r4,last_task_used_spe@l(r3)
656 cmpi 0,r4,0
657 beq 1f
658 addi r4,r4,THREAD /* want THREAD of last_task_used_spe */
659 SAVE_32EVRS(0,r10,r4)
660 evxor evr10, evr10, evr10 /* clear out evr10 */
661 evmwumiaa evr10, evr10, evr10 /* evr10 <- ACC = 0 * 0 + ACC */
662 li r5,THREAD_ACC
663 evstddx evr10, r4, r5 /* save off accumulator */
664 lwz r5,PT_REGS(r4)
665 lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
666 lis r10,MSR_SPE@h
667 andc r4,r4,r10 /* disable SPE for previous task */
668 stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
669 1:
670 #endif /* !CONFIG_SMP */
671 /* enable use of SPE after return */
672 oris r9,r9,MSR_SPE@h
673 mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
674 li r4,1
675 li r10,THREAD_ACC
676 stw r4,THREAD_USED_SPE(r5)
677 evlddx evr4,r10,r5
678 evmra evr4,evr4
679 REST_32EVRS(0,r10,r5)
680 #ifndef CONFIG_SMP
681 subi r4,r5,THREAD
682 stw r4,last_task_used_spe@l(r3)
683 #endif /* !CONFIG_SMP */
684 /* restore registers and return */
685 2: REST_4GPRS(3, r11)
686 lwz r10,_CCR(r11)
687 REST_GPR(1, r11)
688 mtcr r10
689 lwz r10,_LINK(r11)
690 mtlr r10
691 REST_GPR(10, r11)
692 mtspr SPRN_SRR1,r9
693 mtspr SPRN_SRR0,r12
694 REST_GPR(9, r11)
695 REST_GPR(12, r11)
696 lwz r11,GPR11(r11)
697 rfi
699 /*
700 * SPE unavailable trap from kernel - print a message, but let
701 * the task use SPE in the kernel until it returns to user mode.
702 */
703 KernelSPE:
704 lwz r3,_MSR(r1)
705 oris r3,r3,MSR_SPE@h
706 stw r3,_MSR(r1) /* enable use of SPE after return */
707 #ifdef CONFIG_PRINTK
708 lis r3,87f@h
709 ori r3,r3,87f@l
710 mr r4,r2 /* current */
711 lwz r5,_NIP(r1)
712 bl printk
713 #endif
714 b ret_from_except
715 #ifdef CONFIG_PRINTK
716 87: .string "SPE used in kernel (task=%p, pc=%x) \n"
717 #endif
718 .align 4,0
720 #endif /* CONFIG_SPE */
722 /*
723 * Global functions
724 */
726 /* Adjust or setup IVORs for e200 */
727 _GLOBAL(__setup_e200_ivors)
728 li r3,DebugDebug@l
729 mtspr SPRN_IVOR15,r3
730 li r3,SPEUnavailable@l
731 mtspr SPRN_IVOR32,r3
732 li r3,SPEFloatingPointData@l
733 mtspr SPRN_IVOR33,r3
734 li r3,SPEFloatingPointRound@l
735 mtspr SPRN_IVOR34,r3
736 sync
737 blr
739 /* Adjust or setup IVORs for e500v1/v2 */
740 _GLOBAL(__setup_e500_ivors)
741 li r3,DebugCrit@l
742 mtspr SPRN_IVOR15,r3
743 li r3,SPEUnavailable@l
744 mtspr SPRN_IVOR32,r3
745 li r3,SPEFloatingPointData@l
746 mtspr SPRN_IVOR33,r3
747 li r3,SPEFloatingPointRound@l
748 mtspr SPRN_IVOR34,r3
749 li r3,PerformanceMonitor@l
750 mtspr SPRN_IVOR35,r3
751 sync
752 blr
754 /* Adjust or setup IVORs for e500mc */
755 _GLOBAL(__setup_e500mc_ivors)
756 li r3,DebugDebug@l
757 mtspr SPRN_IVOR15,r3
758 li r3,PerformanceMonitor@l
759 mtspr SPRN_IVOR35,r3
760 li r3,Doorbell@l
761 mtspr SPRN_IVOR36,r3
762 li r3,CriticalDoorbell@l
763 mtspr SPRN_IVOR37,r3
764 sync
765 blr
767 /*
768 * extern void giveup_altivec(struct task_struct *prev)
769 *
770 * The e500 core does not have an AltiVec unit.
771 */
772 _GLOBAL(giveup_altivec)
773 blr
775 #ifdef CONFIG_SPE
776 /*
777 * extern void giveup_spe(struct task_struct *prev)
778 *
779 */
780 _GLOBAL(giveup_spe)
781 mfmsr r5
782 oris r5,r5,MSR_SPE@h
783 mtmsr r5 /* enable use of SPE now */
784 isync
785 cmpi 0,r3,0
786 beqlr- /* if no previous owner, done */
787 addi r3,r3,THREAD /* want THREAD of task */
788 lwz r5,PT_REGS(r3)
789 cmpi 0,r5,0
790 SAVE_32EVRS(0, r4, r3)
791 evxor evr6, evr6, evr6 /* clear out evr6 */
792 evmwumiaa evr6, evr6, evr6 /* evr6 <- ACC = 0 * 0 + ACC */
793 li r4,THREAD_ACC
794 evstddx evr6, r4, r3 /* save off accumulator */
795 mfspr r6,SPRN_SPEFSCR
796 stw r6,THREAD_SPEFSCR(r3) /* save spefscr register value */
797 beq 1f
798 lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
799 lis r3,MSR_SPE@h
800 andc r4,r4,r3 /* disable SPE for previous task */
801 stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
802 1:
803 #ifndef CONFIG_SMP
804 li r5,0
805 lis r4,last_task_used_spe@ha
806 stw r5,last_task_used_spe@l(r4)
807 #endif /* !CONFIG_SMP */
808 blr
809 #endif /* CONFIG_SPE */
811 /*
812 * extern void giveup_fpu(struct task_struct *prev)
813 *
814 * Not all FSL Book-E cores have an FPU
815 */
816 #ifndef CONFIG_PPC_FPU
817 _GLOBAL(giveup_fpu)
818 blr
819 #endif
821 /*
822 * extern void abort(void)
823 *
824 * At present, this routine just applies a system reset.
825 */
826 _GLOBAL(abort)
827 li r13,0
828 mtspr SPRN_DBCR0,r13 /* disable all debug events */
829 isync
830 mfmsr r13
831 ori r13,r13,MSR_DE@l /* Enable Debug Events */
832 mtmsr r13
833 isync
834 mfspr r13,SPRN_DBCR0
835 lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
836 mtspr SPRN_DBCR0,r13
837 isync
839 _GLOBAL(set_context)
841 #ifdef CONFIG_BDI_SWITCH
842 /* Context switch the PTE pointer for the Abatron BDI2000.
843 * The PGDIR is the second parameter.
844 */
845 lis r5, abatron_pteptrs@h
846 ori r5, r5, abatron_pteptrs@l
847 stw r4, 0x4(r5)
848 #endif
849 mtspr SPRN_PID,r3
850 isync /* Force context change */
851 blr
853 _GLOBAL(flush_dcache_L1)
854 mfspr r3,SPRN_L1CFG0
856 rlwinm r5,r3,9,3 /* Extract cache block size */
857 twlgti r5,1 /* Only 32 and 64 byte cache blocks
858 * are currently defined.
859 */
860 li r4,32
861 subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
862 * log2(number of ways)
863 */
864 slw r5,r4,r5 /* r5 = cache block size */
866 rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
867 mulli r7,r7,13 /* An 8-way cache will require 13
868 * loads per set.
869 */
870 slw r7,r7,r6
872 /* save off HID0 and set DCFA */
873 mfspr r8,SPRN_HID0
874 ori r9,r8,HID0_DCFA@l
875 mtspr SPRN_HID0,r9
876 isync
878 lis r4,KERNELBASE@h
879 mtctr r7
881 1: lwz r3,0(r4) /* Load... */
882 add r4,r4,r5
883 bdnz 1b
885 msync
886 lis r4,KERNELBASE@h
887 mtctr r7
889 1: dcbf 0,r4 /* ...and flush. */
890 add r4,r4,r5
891 bdnz 1b
893 /* restore HID0 */
894 mtspr SPRN_HID0,r8
895 isync
897 blr
899 #ifdef CONFIG_SMP
900 /* When we get here, r24 needs to hold the CPU # */
901 .globl __secondary_start
902 __secondary_start:
903 lis r3,__secondary_hold_acknowledge@h
904 ori r3,r3,__secondary_hold_acknowledge@l
905 stw r24,0(r3)
907 li r3,0
908 mr r4,r24 /* Why? */
909 bl call_setup_cpu
911 lis r3,tlbcam_index@ha
912 lwz r3,tlbcam_index@l(r3)
913 mtctr r3
914 li r26,0 /* r26 safe? */
916 /* Load each CAM entry */
917 1: mr r3,r26
918 bl loadcam_entry
919 addi r26,r26,1
920 bdnz 1b
922 /* get current_thread_info and current */
923 lis r1,secondary_ti@ha
924 lwz r1,secondary_ti@l(r1)
925 lwz r2,TI_TASK(r1)
927 /* stack */
928 addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
929 li r0,0
930 stw r0,0(r1)
932 /* ptr to current thread */
933 addi r4,r2,THREAD /* address of our thread_struct */
934 mtspr SPRN_SPRG_THREAD,r4
936 /* Setup the defaults for TLB entries */
937 li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
938 mtspr SPRN_MAS4,r4
940 /* Jump to start_secondary */
941 lis r4,MSR_KERNEL@h
942 ori r4,r4,MSR_KERNEL@l
943 lis r3,start_secondary@h
944 ori r3,r3,start_secondary@l
945 mtspr SPRN_SRR0,r3
946 mtspr SPRN_SRR1,r4
947 sync
948 rfi
949 sync
951 .globl __secondary_hold_acknowledge
952 __secondary_hold_acknowledge:
953 .long -1
954 #endif
956 /*
957 * We put a few things here that have to be page-aligned. This stuff
958 * goes at the beginning of the data segment, which is page-aligned.
959 */
960 .data
961 .align 12
962 .globl sdata
963 sdata:
964 .globl empty_zero_page
965 empty_zero_page:
966 .space 4096
967 .globl swapper_pg_dir
968 swapper_pg_dir:
969 .space PGD_TABLE_SIZE
971 /*
972 * Room for two PTE pointers, usually the kernel and current user pointers
973 * to their respective root page table.
974 */
975 abatron_pteptrs:
976 .space 8