netfilter: ipv6: move POSTROUTING invocation before fragmentation
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / fs / ocfs2 / aops.c
blob21441ddb550659d20b875da3d2d6a6c16cb33e5c
1 /* -*- mode: c; c-basic-offset: 8; -*-
2 * vim: noexpandtab sw=8 ts=8 sts=0:
4 * Copyright (C) 2002, 2004 Oracle. All rights reserved.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public
8 * License as published by the Free Software Foundation; either
9 * version 2 of the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the
18 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
19 * Boston, MA 021110-1307, USA.
22 #include <linux/fs.h>
23 #include <linux/slab.h>
24 #include <linux/highmem.h>
25 #include <linux/pagemap.h>
26 #include <asm/byteorder.h>
27 #include <linux/swap.h>
28 #include <linux/pipe_fs_i.h>
29 #include <linux/mpage.h>
30 #include <linux/quotaops.h>
32 #define MLOG_MASK_PREFIX ML_FILE_IO
33 #include <cluster/masklog.h>
35 #include "ocfs2.h"
37 #include "alloc.h"
38 #include "aops.h"
39 #include "dlmglue.h"
40 #include "extent_map.h"
41 #include "file.h"
42 #include "inode.h"
43 #include "journal.h"
44 #include "suballoc.h"
45 #include "super.h"
46 #include "symlink.h"
47 #include "refcounttree.h"
49 #include "buffer_head_io.h"
51 static int ocfs2_symlink_get_block(struct inode *inode, sector_t iblock,
52 struct buffer_head *bh_result, int create)
54 int err = -EIO;
55 int status;
56 struct ocfs2_dinode *fe = NULL;
57 struct buffer_head *bh = NULL;
58 struct buffer_head *buffer_cache_bh = NULL;
59 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
60 void *kaddr;
62 mlog_entry("(0x%p, %llu, 0x%p, %d)\n", inode,
63 (unsigned long long)iblock, bh_result, create);
65 BUG_ON(ocfs2_inode_is_fast_symlink(inode));
67 if ((iblock << inode->i_sb->s_blocksize_bits) > PATH_MAX + 1) {
68 mlog(ML_ERROR, "block offset > PATH_MAX: %llu",
69 (unsigned long long)iblock);
70 goto bail;
73 status = ocfs2_read_inode_block(inode, &bh);
74 if (status < 0) {
75 mlog_errno(status);
76 goto bail;
78 fe = (struct ocfs2_dinode *) bh->b_data;
80 if ((u64)iblock >= ocfs2_clusters_to_blocks(inode->i_sb,
81 le32_to_cpu(fe->i_clusters))) {
82 mlog(ML_ERROR, "block offset is outside the allocated size: "
83 "%llu\n", (unsigned long long)iblock);
84 goto bail;
87 /* We don't use the page cache to create symlink data, so if
88 * need be, copy it over from the buffer cache. */
89 if (!buffer_uptodate(bh_result) && ocfs2_inode_is_new(inode)) {
90 u64 blkno = le64_to_cpu(fe->id2.i_list.l_recs[0].e_blkno) +
91 iblock;
92 buffer_cache_bh = sb_getblk(osb->sb, blkno);
93 if (!buffer_cache_bh) {
94 mlog(ML_ERROR, "couldn't getblock for symlink!\n");
95 goto bail;
98 /* we haven't locked out transactions, so a commit
99 * could've happened. Since we've got a reference on
100 * the bh, even if it commits while we're doing the
101 * copy, the data is still good. */
102 if (buffer_jbd(buffer_cache_bh)
103 && ocfs2_inode_is_new(inode)) {
104 kaddr = kmap_atomic(bh_result->b_page, KM_USER0);
105 if (!kaddr) {
106 mlog(ML_ERROR, "couldn't kmap!\n");
107 goto bail;
109 memcpy(kaddr + (bh_result->b_size * iblock),
110 buffer_cache_bh->b_data,
111 bh_result->b_size);
112 kunmap_atomic(kaddr, KM_USER0);
113 set_buffer_uptodate(bh_result);
115 brelse(buffer_cache_bh);
118 map_bh(bh_result, inode->i_sb,
119 le64_to_cpu(fe->id2.i_list.l_recs[0].e_blkno) + iblock);
121 err = 0;
123 bail:
124 brelse(bh);
126 mlog_exit(err);
127 return err;
130 int ocfs2_get_block(struct inode *inode, sector_t iblock,
131 struct buffer_head *bh_result, int create)
133 int err = 0;
134 unsigned int ext_flags;
135 u64 max_blocks = bh_result->b_size >> inode->i_blkbits;
136 u64 p_blkno, count, past_eof;
137 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
139 mlog_entry("(0x%p, %llu, 0x%p, %d)\n", inode,
140 (unsigned long long)iblock, bh_result, create);
142 if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE)
143 mlog(ML_NOTICE, "get_block on system inode 0x%p (%lu)\n",
144 inode, inode->i_ino);
146 if (S_ISLNK(inode->i_mode)) {
147 /* this always does I/O for some reason. */
148 err = ocfs2_symlink_get_block(inode, iblock, bh_result, create);
149 goto bail;
152 err = ocfs2_extent_map_get_blocks(inode, iblock, &p_blkno, &count,
153 &ext_flags);
154 if (err) {
155 mlog(ML_ERROR, "Error %d from get_blocks(0x%p, %llu, 1, "
156 "%llu, NULL)\n", err, inode, (unsigned long long)iblock,
157 (unsigned long long)p_blkno);
158 goto bail;
161 if (max_blocks < count)
162 count = max_blocks;
165 * ocfs2 never allocates in this function - the only time we
166 * need to use BH_New is when we're extending i_size on a file
167 * system which doesn't support holes, in which case BH_New
168 * allows block_prepare_write() to zero.
170 * If we see this on a sparse file system, then a truncate has
171 * raced us and removed the cluster. In this case, we clear
172 * the buffers dirty and uptodate bits and let the buffer code
173 * ignore it as a hole.
175 if (create && p_blkno == 0 && ocfs2_sparse_alloc(osb)) {
176 clear_buffer_dirty(bh_result);
177 clear_buffer_uptodate(bh_result);
178 goto bail;
181 /* Treat the unwritten extent as a hole for zeroing purposes. */
182 if (p_blkno && !(ext_flags & OCFS2_EXT_UNWRITTEN))
183 map_bh(bh_result, inode->i_sb, p_blkno);
185 bh_result->b_size = count << inode->i_blkbits;
187 if (!ocfs2_sparse_alloc(osb)) {
188 if (p_blkno == 0) {
189 err = -EIO;
190 mlog(ML_ERROR,
191 "iblock = %llu p_blkno = %llu blkno=(%llu)\n",
192 (unsigned long long)iblock,
193 (unsigned long long)p_blkno,
194 (unsigned long long)OCFS2_I(inode)->ip_blkno);
195 mlog(ML_ERROR, "Size %llu, clusters %u\n", (unsigned long long)i_size_read(inode), OCFS2_I(inode)->ip_clusters);
196 dump_stack();
197 goto bail;
200 past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
201 mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
202 (unsigned long long)past_eof);
204 if (create && (iblock >= past_eof))
205 set_buffer_new(bh_result);
208 bail:
209 if (err < 0)
210 err = -EIO;
212 mlog_exit(err);
213 return err;
216 int ocfs2_read_inline_data(struct inode *inode, struct page *page,
217 struct buffer_head *di_bh)
219 void *kaddr;
220 loff_t size;
221 struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
223 if (!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL)) {
224 ocfs2_error(inode->i_sb, "Inode %llu lost inline data flag",
225 (unsigned long long)OCFS2_I(inode)->ip_blkno);
226 return -EROFS;
229 size = i_size_read(inode);
231 if (size > PAGE_CACHE_SIZE ||
232 size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
233 ocfs2_error(inode->i_sb,
234 "Inode %llu has with inline data has bad size: %Lu",
235 (unsigned long long)OCFS2_I(inode)->ip_blkno,
236 (unsigned long long)size);
237 return -EROFS;
240 kaddr = kmap_atomic(page, KM_USER0);
241 if (size)
242 memcpy(kaddr, di->id2.i_data.id_data, size);
243 /* Clear the remaining part of the page */
244 memset(kaddr + size, 0, PAGE_CACHE_SIZE - size);
245 flush_dcache_page(page);
246 kunmap_atomic(kaddr, KM_USER0);
248 SetPageUptodate(page);
250 return 0;
253 static int ocfs2_readpage_inline(struct inode *inode, struct page *page)
255 int ret;
256 struct buffer_head *di_bh = NULL;
258 BUG_ON(!PageLocked(page));
259 BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL));
261 ret = ocfs2_read_inode_block(inode, &di_bh);
262 if (ret) {
263 mlog_errno(ret);
264 goto out;
267 ret = ocfs2_read_inline_data(inode, page, di_bh);
268 out:
269 unlock_page(page);
271 brelse(di_bh);
272 return ret;
275 static int ocfs2_readpage(struct file *file, struct page *page)
277 struct inode *inode = page->mapping->host;
278 struct ocfs2_inode_info *oi = OCFS2_I(inode);
279 loff_t start = (loff_t)page->index << PAGE_CACHE_SHIFT;
280 int ret, unlock = 1;
282 mlog_entry("(0x%p, %lu)\n", file, (page ? page->index : 0));
284 ret = ocfs2_inode_lock_with_page(inode, NULL, 0, page);
285 if (ret != 0) {
286 if (ret == AOP_TRUNCATED_PAGE)
287 unlock = 0;
288 mlog_errno(ret);
289 goto out;
292 if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
293 ret = AOP_TRUNCATED_PAGE;
294 goto out_inode_unlock;
298 * i_size might have just been updated as we grabed the meta lock. We
299 * might now be discovering a truncate that hit on another node.
300 * block_read_full_page->get_block freaks out if it is asked to read
301 * beyond the end of a file, so we check here. Callers
302 * (generic_file_read, vm_ops->fault) are clever enough to check i_size
303 * and notice that the page they just read isn't needed.
305 * XXX sys_readahead() seems to get that wrong?
307 if (start >= i_size_read(inode)) {
308 zero_user(page, 0, PAGE_SIZE);
309 SetPageUptodate(page);
310 ret = 0;
311 goto out_alloc;
314 if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
315 ret = ocfs2_readpage_inline(inode, page);
316 else
317 ret = block_read_full_page(page, ocfs2_get_block);
318 unlock = 0;
320 out_alloc:
321 up_read(&OCFS2_I(inode)->ip_alloc_sem);
322 out_inode_unlock:
323 ocfs2_inode_unlock(inode, 0);
324 out:
325 if (unlock)
326 unlock_page(page);
327 mlog_exit(ret);
328 return ret;
332 * This is used only for read-ahead. Failures or difficult to handle
333 * situations are safe to ignore.
335 * Right now, we don't bother with BH_Boundary - in-inode extent lists
336 * are quite large (243 extents on 4k blocks), so most inodes don't
337 * grow out to a tree. If need be, detecting boundary extents could
338 * trivially be added in a future version of ocfs2_get_block().
340 static int ocfs2_readpages(struct file *filp, struct address_space *mapping,
341 struct list_head *pages, unsigned nr_pages)
343 int ret, err = -EIO;
344 struct inode *inode = mapping->host;
345 struct ocfs2_inode_info *oi = OCFS2_I(inode);
346 loff_t start;
347 struct page *last;
350 * Use the nonblocking flag for the dlm code to avoid page
351 * lock inversion, but don't bother with retrying.
353 ret = ocfs2_inode_lock_full(inode, NULL, 0, OCFS2_LOCK_NONBLOCK);
354 if (ret)
355 return err;
357 if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
358 ocfs2_inode_unlock(inode, 0);
359 return err;
363 * Don't bother with inline-data. There isn't anything
364 * to read-ahead in that case anyway...
366 if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
367 goto out_unlock;
370 * Check whether a remote node truncated this file - we just
371 * drop out in that case as it's not worth handling here.
373 last = list_entry(pages->prev, struct page, lru);
374 start = (loff_t)last->index << PAGE_CACHE_SHIFT;
375 if (start >= i_size_read(inode))
376 goto out_unlock;
378 err = mpage_readpages(mapping, pages, nr_pages, ocfs2_get_block);
380 out_unlock:
381 up_read(&oi->ip_alloc_sem);
382 ocfs2_inode_unlock(inode, 0);
384 return err;
387 /* Note: Because we don't support holes, our allocation has
388 * already happened (allocation writes zeros to the file data)
389 * so we don't have to worry about ordered writes in
390 * ocfs2_writepage.
392 * ->writepage is called during the process of invalidating the page cache
393 * during blocked lock processing. It can't block on any cluster locks
394 * to during block mapping. It's relying on the fact that the block
395 * mapping can't have disappeared under the dirty pages that it is
396 * being asked to write back.
398 static int ocfs2_writepage(struct page *page, struct writeback_control *wbc)
400 int ret;
402 mlog_entry("(0x%p)\n", page);
404 ret = block_write_full_page(page, ocfs2_get_block, wbc);
406 mlog_exit(ret);
408 return ret;
412 * This is called from ocfs2_write_zero_page() which has handled it's
413 * own cluster locking and has ensured allocation exists for those
414 * blocks to be written.
416 int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
417 unsigned from, unsigned to)
419 int ret;
421 ret = block_prepare_write(page, from, to, ocfs2_get_block);
423 return ret;
426 /* Taken from ext3. We don't necessarily need the full blown
427 * functionality yet, but IMHO it's better to cut and paste the whole
428 * thing so we can avoid introducing our own bugs (and easily pick up
429 * their fixes when they happen) --Mark */
430 int walk_page_buffers( handle_t *handle,
431 struct buffer_head *head,
432 unsigned from,
433 unsigned to,
434 int *partial,
435 int (*fn)( handle_t *handle,
436 struct buffer_head *bh))
438 struct buffer_head *bh;
439 unsigned block_start, block_end;
440 unsigned blocksize = head->b_size;
441 int err, ret = 0;
442 struct buffer_head *next;
444 for ( bh = head, block_start = 0;
445 ret == 0 && (bh != head || !block_start);
446 block_start = block_end, bh = next)
448 next = bh->b_this_page;
449 block_end = block_start + blocksize;
450 if (block_end <= from || block_start >= to) {
451 if (partial && !buffer_uptodate(bh))
452 *partial = 1;
453 continue;
455 err = (*fn)(handle, bh);
456 if (!ret)
457 ret = err;
459 return ret;
462 handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
463 struct page *page,
464 unsigned from,
465 unsigned to)
467 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
468 handle_t *handle;
469 int ret = 0;
471 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
472 if (IS_ERR(handle)) {
473 ret = -ENOMEM;
474 mlog_errno(ret);
475 goto out;
478 if (ocfs2_should_order_data(inode)) {
479 ret = ocfs2_jbd2_file_inode(handle, inode);
480 if (ret < 0)
481 mlog_errno(ret);
483 out:
484 if (ret) {
485 if (!IS_ERR(handle))
486 ocfs2_commit_trans(osb, handle);
487 handle = ERR_PTR(ret);
489 return handle;
492 static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
494 sector_t status;
495 u64 p_blkno = 0;
496 int err = 0;
497 struct inode *inode = mapping->host;
499 mlog_entry("(block = %llu)\n", (unsigned long long)block);
501 /* We don't need to lock journal system files, since they aren't
502 * accessed concurrently from multiple nodes.
504 if (!INODE_JOURNAL(inode)) {
505 err = ocfs2_inode_lock(inode, NULL, 0);
506 if (err) {
507 if (err != -ENOENT)
508 mlog_errno(err);
509 goto bail;
511 down_read(&OCFS2_I(inode)->ip_alloc_sem);
514 if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL))
515 err = ocfs2_extent_map_get_blocks(inode, block, &p_blkno, NULL,
516 NULL);
518 if (!INODE_JOURNAL(inode)) {
519 up_read(&OCFS2_I(inode)->ip_alloc_sem);
520 ocfs2_inode_unlock(inode, 0);
523 if (err) {
524 mlog(ML_ERROR, "get_blocks() failed, block = %llu\n",
525 (unsigned long long)block);
526 mlog_errno(err);
527 goto bail;
530 bail:
531 status = err ? 0 : p_blkno;
533 mlog_exit((int)status);
535 return status;
539 * TODO: Make this into a generic get_blocks function.
541 * From do_direct_io in direct-io.c:
542 * "So what we do is to permit the ->get_blocks function to populate
543 * bh.b_size with the size of IO which is permitted at this offset and
544 * this i_blkbits."
546 * This function is called directly from get_more_blocks in direct-io.c.
548 * called like this: dio->get_blocks(dio->inode, fs_startblk,
549 * fs_count, map_bh, dio->rw == WRITE);
551 * Note that we never bother to allocate blocks here, and thus ignore the
552 * create argument.
554 static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock,
555 struct buffer_head *bh_result, int create)
557 int ret;
558 u64 p_blkno, inode_blocks, contig_blocks;
559 unsigned int ext_flags;
560 unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
561 unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
563 /* This function won't even be called if the request isn't all
564 * nicely aligned and of the right size, so there's no need
565 * for us to check any of that. */
567 inode_blocks = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
569 /* This figures out the size of the next contiguous block, and
570 * our logical offset */
571 ret = ocfs2_extent_map_get_blocks(inode, iblock, &p_blkno,
572 &contig_blocks, &ext_flags);
573 if (ret) {
574 mlog(ML_ERROR, "get_blocks() failed iblock=%llu\n",
575 (unsigned long long)iblock);
576 ret = -EIO;
577 goto bail;
580 /* We should already CoW the refcounted extent in case of create. */
581 BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED));
584 * get_more_blocks() expects us to describe a hole by clearing
585 * the mapped bit on bh_result().
587 * Consider an unwritten extent as a hole.
589 if (p_blkno && !(ext_flags & OCFS2_EXT_UNWRITTEN))
590 map_bh(bh_result, inode->i_sb, p_blkno);
591 else
592 clear_buffer_mapped(bh_result);
594 /* make sure we don't map more than max_blocks blocks here as
595 that's all the kernel will handle at this point. */
596 if (max_blocks < contig_blocks)
597 contig_blocks = max_blocks;
598 bh_result->b_size = contig_blocks << blocksize_bits;
599 bail:
600 return ret;
604 * ocfs2_dio_end_io is called by the dio core when a dio is finished. We're
605 * particularly interested in the aio/dio case. Like the core uses
606 * i_alloc_sem, we use the rw_lock DLM lock to protect io on one node from
607 * truncation on another.
609 static void ocfs2_dio_end_io(struct kiocb *iocb,
610 loff_t offset,
611 ssize_t bytes,
612 void *private)
614 struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
615 int level;
617 /* this io's submitter should not have unlocked this before we could */
618 BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
620 ocfs2_iocb_clear_rw_locked(iocb);
622 level = ocfs2_iocb_rw_locked_level(iocb);
623 if (!level)
624 up_read(&inode->i_alloc_sem);
625 ocfs2_rw_unlock(inode, level);
629 * ocfs2_invalidatepage() and ocfs2_releasepage() are shamelessly stolen
630 * from ext3. PageChecked() bits have been removed as OCFS2 does not
631 * do journalled data.
633 static void ocfs2_invalidatepage(struct page *page, unsigned long offset)
635 journal_t *journal = OCFS2_SB(page->mapping->host->i_sb)->journal->j_journal;
637 jbd2_journal_invalidatepage(journal, page, offset);
640 static int ocfs2_releasepage(struct page *page, gfp_t wait)
642 journal_t *journal = OCFS2_SB(page->mapping->host->i_sb)->journal->j_journal;
644 if (!page_has_buffers(page))
645 return 0;
646 return jbd2_journal_try_to_free_buffers(journal, page, wait);
649 static ssize_t ocfs2_direct_IO(int rw,
650 struct kiocb *iocb,
651 const struct iovec *iov,
652 loff_t offset,
653 unsigned long nr_segs)
655 struct file *file = iocb->ki_filp;
656 struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
657 int ret;
659 mlog_entry_void();
662 * Fallback to buffered I/O if we see an inode without
663 * extents.
665 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)
666 return 0;
668 /* Fallback to buffered I/O if we are appending. */
669 if (i_size_read(inode) <= offset)
670 return 0;
672 ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
673 inode->i_sb->s_bdev, iov, offset,
674 nr_segs,
675 ocfs2_direct_IO_get_blocks,
676 ocfs2_dio_end_io);
678 mlog_exit(ret);
679 return ret;
682 static void ocfs2_figure_cluster_boundaries(struct ocfs2_super *osb,
683 u32 cpos,
684 unsigned int *start,
685 unsigned int *end)
687 unsigned int cluster_start = 0, cluster_end = PAGE_CACHE_SIZE;
689 if (unlikely(PAGE_CACHE_SHIFT > osb->s_clustersize_bits)) {
690 unsigned int cpp;
692 cpp = 1 << (PAGE_CACHE_SHIFT - osb->s_clustersize_bits);
694 cluster_start = cpos % cpp;
695 cluster_start = cluster_start << osb->s_clustersize_bits;
697 cluster_end = cluster_start + osb->s_clustersize;
700 BUG_ON(cluster_start > PAGE_SIZE);
701 BUG_ON(cluster_end > PAGE_SIZE);
703 if (start)
704 *start = cluster_start;
705 if (end)
706 *end = cluster_end;
710 * 'from' and 'to' are the region in the page to avoid zeroing.
712 * If pagesize > clustersize, this function will avoid zeroing outside
713 * of the cluster boundary.
715 * from == to == 0 is code for "zero the entire cluster region"
717 static void ocfs2_clear_page_regions(struct page *page,
718 struct ocfs2_super *osb, u32 cpos,
719 unsigned from, unsigned to)
721 void *kaddr;
722 unsigned int cluster_start, cluster_end;
724 ocfs2_figure_cluster_boundaries(osb, cpos, &cluster_start, &cluster_end);
726 kaddr = kmap_atomic(page, KM_USER0);
728 if (from || to) {
729 if (from > cluster_start)
730 memset(kaddr + cluster_start, 0, from - cluster_start);
731 if (to < cluster_end)
732 memset(kaddr + to, 0, cluster_end - to);
733 } else {
734 memset(kaddr + cluster_start, 0, cluster_end - cluster_start);
737 kunmap_atomic(kaddr, KM_USER0);
741 * Nonsparse file systems fully allocate before we get to the write
742 * code. This prevents ocfs2_write() from tagging the write as an
743 * allocating one, which means ocfs2_map_page_blocks() might try to
744 * read-in the blocks at the tail of our file. Avoid reading them by
745 * testing i_size against each block offset.
747 static int ocfs2_should_read_blk(struct inode *inode, struct page *page,
748 unsigned int block_start)
750 u64 offset = page_offset(page) + block_start;
752 if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
753 return 1;
755 if (i_size_read(inode) > offset)
756 return 1;
758 return 0;
762 * Some of this taken from block_prepare_write(). We already have our
763 * mapping by now though, and the entire write will be allocating or
764 * it won't, so not much need to use BH_New.
766 * This will also skip zeroing, which is handled externally.
768 int ocfs2_map_page_blocks(struct page *page, u64 *p_blkno,
769 struct inode *inode, unsigned int from,
770 unsigned int to, int new)
772 int ret = 0;
773 struct buffer_head *head, *bh, *wait[2], **wait_bh = wait;
774 unsigned int block_end, block_start;
775 unsigned int bsize = 1 << inode->i_blkbits;
777 if (!page_has_buffers(page))
778 create_empty_buffers(page, bsize, 0);
780 head = page_buffers(page);
781 for (bh = head, block_start = 0; bh != head || !block_start;
782 bh = bh->b_this_page, block_start += bsize) {
783 block_end = block_start + bsize;
785 clear_buffer_new(bh);
788 * Ignore blocks outside of our i/o range -
789 * they may belong to unallocated clusters.
791 if (block_start >= to || block_end <= from) {
792 if (PageUptodate(page))
793 set_buffer_uptodate(bh);
794 continue;
798 * For an allocating write with cluster size >= page
799 * size, we always write the entire page.
801 if (new)
802 set_buffer_new(bh);
804 if (!buffer_mapped(bh)) {
805 map_bh(bh, inode->i_sb, *p_blkno);
806 unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr);
809 if (PageUptodate(page)) {
810 if (!buffer_uptodate(bh))
811 set_buffer_uptodate(bh);
812 } else if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
813 !buffer_new(bh) &&
814 ocfs2_should_read_blk(inode, page, block_start) &&
815 (block_start < from || block_end > to)) {
816 ll_rw_block(READ, 1, &bh);
817 *wait_bh++=bh;
820 *p_blkno = *p_blkno + 1;
824 * If we issued read requests - let them complete.
826 while(wait_bh > wait) {
827 wait_on_buffer(*--wait_bh);
828 if (!buffer_uptodate(*wait_bh))
829 ret = -EIO;
832 if (ret == 0 || !new)
833 return ret;
836 * If we get -EIO above, zero out any newly allocated blocks
837 * to avoid exposing stale data.
839 bh = head;
840 block_start = 0;
841 do {
842 block_end = block_start + bsize;
843 if (block_end <= from)
844 goto next_bh;
845 if (block_start >= to)
846 break;
848 zero_user(page, block_start, bh->b_size);
849 set_buffer_uptodate(bh);
850 mark_buffer_dirty(bh);
852 next_bh:
853 block_start = block_end;
854 bh = bh->b_this_page;
855 } while (bh != head);
857 return ret;
860 #if (PAGE_CACHE_SIZE >= OCFS2_MAX_CLUSTERSIZE)
861 #define OCFS2_MAX_CTXT_PAGES 1
862 #else
863 #define OCFS2_MAX_CTXT_PAGES (OCFS2_MAX_CLUSTERSIZE / PAGE_CACHE_SIZE)
864 #endif
866 #define OCFS2_MAX_CLUSTERS_PER_PAGE (PAGE_CACHE_SIZE / OCFS2_MIN_CLUSTERSIZE)
869 * Describe the state of a single cluster to be written to.
871 struct ocfs2_write_cluster_desc {
872 u32 c_cpos;
873 u32 c_phys;
875 * Give this a unique field because c_phys eventually gets
876 * filled.
878 unsigned c_new;
879 unsigned c_unwritten;
880 unsigned c_needs_zero;
883 struct ocfs2_write_ctxt {
884 /* Logical cluster position / len of write */
885 u32 w_cpos;
886 u32 w_clen;
888 /* First cluster allocated in a nonsparse extend */
889 u32 w_first_new_cpos;
891 struct ocfs2_write_cluster_desc w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE];
894 * This is true if page_size > cluster_size.
896 * It triggers a set of special cases during write which might
897 * have to deal with allocating writes to partial pages.
899 unsigned int w_large_pages;
902 * Pages involved in this write.
904 * w_target_page is the page being written to by the user.
906 * w_pages is an array of pages which always contains
907 * w_target_page, and in the case of an allocating write with
908 * page_size < cluster size, it will contain zero'd and mapped
909 * pages adjacent to w_target_page which need to be written
910 * out in so that future reads from that region will get
911 * zero's.
913 struct page *w_pages[OCFS2_MAX_CTXT_PAGES];
914 unsigned int w_num_pages;
915 struct page *w_target_page;
918 * ocfs2_write_end() uses this to know what the real range to
919 * write in the target should be.
921 unsigned int w_target_from;
922 unsigned int w_target_to;
925 * We could use journal_current_handle() but this is cleaner,
926 * IMHO -Mark
928 handle_t *w_handle;
930 struct buffer_head *w_di_bh;
932 struct ocfs2_cached_dealloc_ctxt w_dealloc;
935 void ocfs2_unlock_and_free_pages(struct page **pages, int num_pages)
937 int i;
939 for(i = 0; i < num_pages; i++) {
940 if (pages[i]) {
941 unlock_page(pages[i]);
942 mark_page_accessed(pages[i]);
943 page_cache_release(pages[i]);
948 static void ocfs2_free_write_ctxt(struct ocfs2_write_ctxt *wc)
950 ocfs2_unlock_and_free_pages(wc->w_pages, wc->w_num_pages);
952 brelse(wc->w_di_bh);
953 kfree(wc);
956 static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp,
957 struct ocfs2_super *osb, loff_t pos,
958 unsigned len, struct buffer_head *di_bh)
960 u32 cend;
961 struct ocfs2_write_ctxt *wc;
963 wc = kzalloc(sizeof(struct ocfs2_write_ctxt), GFP_NOFS);
964 if (!wc)
965 return -ENOMEM;
967 wc->w_cpos = pos >> osb->s_clustersize_bits;
968 wc->w_first_new_cpos = UINT_MAX;
969 cend = (pos + len - 1) >> osb->s_clustersize_bits;
970 wc->w_clen = cend - wc->w_cpos + 1;
971 get_bh(di_bh);
972 wc->w_di_bh = di_bh;
974 if (unlikely(PAGE_CACHE_SHIFT > osb->s_clustersize_bits))
975 wc->w_large_pages = 1;
976 else
977 wc->w_large_pages = 0;
979 ocfs2_init_dealloc_ctxt(&wc->w_dealloc);
981 *wcp = wc;
983 return 0;
987 * If a page has any new buffers, zero them out here, and mark them uptodate
988 * and dirty so they'll be written out (in order to prevent uninitialised
989 * block data from leaking). And clear the new bit.
991 static void ocfs2_zero_new_buffers(struct page *page, unsigned from, unsigned to)
993 unsigned int block_start, block_end;
994 struct buffer_head *head, *bh;
996 BUG_ON(!PageLocked(page));
997 if (!page_has_buffers(page))
998 return;
1000 bh = head = page_buffers(page);
1001 block_start = 0;
1002 do {
1003 block_end = block_start + bh->b_size;
1005 if (buffer_new(bh)) {
1006 if (block_end > from && block_start < to) {
1007 if (!PageUptodate(page)) {
1008 unsigned start, end;
1010 start = max(from, block_start);
1011 end = min(to, block_end);
1013 zero_user_segment(page, start, end);
1014 set_buffer_uptodate(bh);
1017 clear_buffer_new(bh);
1018 mark_buffer_dirty(bh);
1022 block_start = block_end;
1023 bh = bh->b_this_page;
1024 } while (bh != head);
1028 * Only called when we have a failure during allocating write to write
1029 * zero's to the newly allocated region.
1031 static void ocfs2_write_failure(struct inode *inode,
1032 struct ocfs2_write_ctxt *wc,
1033 loff_t user_pos, unsigned user_len)
1035 int i;
1036 unsigned from = user_pos & (PAGE_CACHE_SIZE - 1),
1037 to = user_pos + user_len;
1038 struct page *tmppage;
1040 ocfs2_zero_new_buffers(wc->w_target_page, from, to);
1042 for(i = 0; i < wc->w_num_pages; i++) {
1043 tmppage = wc->w_pages[i];
1045 if (page_has_buffers(tmppage)) {
1046 if (ocfs2_should_order_data(inode))
1047 ocfs2_jbd2_file_inode(wc->w_handle, inode);
1049 block_commit_write(tmppage, from, to);
1054 static int ocfs2_prepare_page_for_write(struct inode *inode, u64 *p_blkno,
1055 struct ocfs2_write_ctxt *wc,
1056 struct page *page, u32 cpos,
1057 loff_t user_pos, unsigned user_len,
1058 int new)
1060 int ret;
1061 unsigned int map_from = 0, map_to = 0;
1062 unsigned int cluster_start, cluster_end;
1063 unsigned int user_data_from = 0, user_data_to = 0;
1065 ocfs2_figure_cluster_boundaries(OCFS2_SB(inode->i_sb), cpos,
1066 &cluster_start, &cluster_end);
1068 if (page == wc->w_target_page) {
1069 map_from = user_pos & (PAGE_CACHE_SIZE - 1);
1070 map_to = map_from + user_len;
1072 if (new)
1073 ret = ocfs2_map_page_blocks(page, p_blkno, inode,
1074 cluster_start, cluster_end,
1075 new);
1076 else
1077 ret = ocfs2_map_page_blocks(page, p_blkno, inode,
1078 map_from, map_to, new);
1079 if (ret) {
1080 mlog_errno(ret);
1081 goto out;
1084 user_data_from = map_from;
1085 user_data_to = map_to;
1086 if (new) {
1087 map_from = cluster_start;
1088 map_to = cluster_end;
1090 } else {
1092 * If we haven't allocated the new page yet, we
1093 * shouldn't be writing it out without copying user
1094 * data. This is likely a math error from the caller.
1096 BUG_ON(!new);
1098 map_from = cluster_start;
1099 map_to = cluster_end;
1101 ret = ocfs2_map_page_blocks(page, p_blkno, inode,
1102 cluster_start, cluster_end, new);
1103 if (ret) {
1104 mlog_errno(ret);
1105 goto out;
1110 * Parts of newly allocated pages need to be zero'd.
1112 * Above, we have also rewritten 'to' and 'from' - as far as
1113 * the rest of the function is concerned, the entire cluster
1114 * range inside of a page needs to be written.
1116 * We can skip this if the page is up to date - it's already
1117 * been zero'd from being read in as a hole.
1119 if (new && !PageUptodate(page))
1120 ocfs2_clear_page_regions(page, OCFS2_SB(inode->i_sb),
1121 cpos, user_data_from, user_data_to);
1123 flush_dcache_page(page);
1125 out:
1126 return ret;
1130 * This function will only grab one clusters worth of pages.
1132 static int ocfs2_grab_pages_for_write(struct address_space *mapping,
1133 struct ocfs2_write_ctxt *wc,
1134 u32 cpos, loff_t user_pos, int new,
1135 struct page *mmap_page)
1137 int ret = 0, i;
1138 unsigned long start, target_index, index;
1139 struct inode *inode = mapping->host;
1141 target_index = user_pos >> PAGE_CACHE_SHIFT;
1144 * Figure out how many pages we'll be manipulating here. For
1145 * non allocating write, we just change the one
1146 * page. Otherwise, we'll need a whole clusters worth.
1148 if (new) {
1149 wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
1150 start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
1151 } else {
1152 wc->w_num_pages = 1;
1153 start = target_index;
1156 for(i = 0; i < wc->w_num_pages; i++) {
1157 index = start + i;
1159 if (index == target_index && mmap_page) {
1161 * ocfs2_pagemkwrite() is a little different
1162 * and wants us to directly use the page
1163 * passed in.
1165 lock_page(mmap_page);
1167 if (mmap_page->mapping != mapping) {
1168 unlock_page(mmap_page);
1170 * Sanity check - the locking in
1171 * ocfs2_pagemkwrite() should ensure
1172 * that this code doesn't trigger.
1174 ret = -EINVAL;
1175 mlog_errno(ret);
1176 goto out;
1179 page_cache_get(mmap_page);
1180 wc->w_pages[i] = mmap_page;
1181 } else {
1182 wc->w_pages[i] = find_or_create_page(mapping, index,
1183 GFP_NOFS);
1184 if (!wc->w_pages[i]) {
1185 ret = -ENOMEM;
1186 mlog_errno(ret);
1187 goto out;
1191 if (index == target_index)
1192 wc->w_target_page = wc->w_pages[i];
1194 out:
1195 return ret;
1199 * Prepare a single cluster for write one cluster into the file.
1201 static int ocfs2_write_cluster(struct address_space *mapping,
1202 u32 phys, unsigned int unwritten,
1203 unsigned int should_zero,
1204 struct ocfs2_alloc_context *data_ac,
1205 struct ocfs2_alloc_context *meta_ac,
1206 struct ocfs2_write_ctxt *wc, u32 cpos,
1207 loff_t user_pos, unsigned user_len)
1209 int ret, i, new;
1210 u64 v_blkno, p_blkno;
1211 struct inode *inode = mapping->host;
1212 struct ocfs2_extent_tree et;
1214 new = phys == 0 ? 1 : 0;
1215 if (new) {
1216 u32 tmp_pos;
1219 * This is safe to call with the page locks - it won't take
1220 * any additional semaphores or cluster locks.
1222 tmp_pos = cpos;
1223 ret = ocfs2_add_inode_data(OCFS2_SB(inode->i_sb), inode,
1224 &tmp_pos, 1, 0, wc->w_di_bh,
1225 wc->w_handle, data_ac,
1226 meta_ac, NULL);
1228 * This shouldn't happen because we must have already
1229 * calculated the correct meta data allocation required. The
1230 * internal tree allocation code should know how to increase
1231 * transaction credits itself.
1233 * If need be, we could handle -EAGAIN for a
1234 * RESTART_TRANS here.
1236 mlog_bug_on_msg(ret == -EAGAIN,
1237 "Inode %llu: EAGAIN return during allocation.\n",
1238 (unsigned long long)OCFS2_I(inode)->ip_blkno);
1239 if (ret < 0) {
1240 mlog_errno(ret);
1241 goto out;
1243 } else if (unwritten) {
1244 ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode),
1245 wc->w_di_bh);
1246 ret = ocfs2_mark_extent_written(inode, &et,
1247 wc->w_handle, cpos, 1, phys,
1248 meta_ac, &wc->w_dealloc);
1249 if (ret < 0) {
1250 mlog_errno(ret);
1251 goto out;
1255 if (should_zero)
1256 v_blkno = ocfs2_clusters_to_blocks(inode->i_sb, cpos);
1257 else
1258 v_blkno = user_pos >> inode->i_sb->s_blocksize_bits;
1261 * The only reason this should fail is due to an inability to
1262 * find the extent added.
1264 ret = ocfs2_extent_map_get_blocks(inode, v_blkno, &p_blkno, NULL,
1265 NULL);
1266 if (ret < 0) {
1267 ocfs2_error(inode->i_sb, "Corrupting extend for inode %llu, "
1268 "at logical block %llu",
1269 (unsigned long long)OCFS2_I(inode)->ip_blkno,
1270 (unsigned long long)v_blkno);
1271 goto out;
1274 BUG_ON(p_blkno == 0);
1276 for(i = 0; i < wc->w_num_pages; i++) {
1277 int tmpret;
1279 tmpret = ocfs2_prepare_page_for_write(inode, &p_blkno, wc,
1280 wc->w_pages[i], cpos,
1281 user_pos, user_len,
1282 should_zero);
1283 if (tmpret) {
1284 mlog_errno(tmpret);
1285 if (ret == 0)
1286 ret = tmpret;
1291 * We only have cleanup to do in case of allocating write.
1293 if (ret && new)
1294 ocfs2_write_failure(inode, wc, user_pos, user_len);
1296 out:
1298 return ret;
1301 static int ocfs2_write_cluster_by_desc(struct address_space *mapping,
1302 struct ocfs2_alloc_context *data_ac,
1303 struct ocfs2_alloc_context *meta_ac,
1304 struct ocfs2_write_ctxt *wc,
1305 loff_t pos, unsigned len)
1307 int ret, i;
1308 loff_t cluster_off;
1309 unsigned int local_len = len;
1310 struct ocfs2_write_cluster_desc *desc;
1311 struct ocfs2_super *osb = OCFS2_SB(mapping->host->i_sb);
1313 for (i = 0; i < wc->w_clen; i++) {
1314 desc = &wc->w_desc[i];
1317 * We have to make sure that the total write passed in
1318 * doesn't extend past a single cluster.
1320 local_len = len;
1321 cluster_off = pos & (osb->s_clustersize - 1);
1322 if ((cluster_off + local_len) > osb->s_clustersize)
1323 local_len = osb->s_clustersize - cluster_off;
1325 ret = ocfs2_write_cluster(mapping, desc->c_phys,
1326 desc->c_unwritten,
1327 desc->c_needs_zero,
1328 data_ac, meta_ac,
1329 wc, desc->c_cpos, pos, local_len);
1330 if (ret) {
1331 mlog_errno(ret);
1332 goto out;
1335 len -= local_len;
1336 pos += local_len;
1339 ret = 0;
1340 out:
1341 return ret;
1345 * ocfs2_write_end() wants to know which parts of the target page it
1346 * should complete the write on. It's easiest to compute them ahead of
1347 * time when a more complete view of the write is available.
1349 static void ocfs2_set_target_boundaries(struct ocfs2_super *osb,
1350 struct ocfs2_write_ctxt *wc,
1351 loff_t pos, unsigned len, int alloc)
1353 struct ocfs2_write_cluster_desc *desc;
1355 wc->w_target_from = pos & (PAGE_CACHE_SIZE - 1);
1356 wc->w_target_to = wc->w_target_from + len;
1358 if (alloc == 0)
1359 return;
1362 * Allocating write - we may have different boundaries based
1363 * on page size and cluster size.
1365 * NOTE: We can no longer compute one value from the other as
1366 * the actual write length and user provided length may be
1367 * different.
1370 if (wc->w_large_pages) {
1372 * We only care about the 1st and last cluster within
1373 * our range and whether they should be zero'd or not. Either
1374 * value may be extended out to the start/end of a
1375 * newly allocated cluster.
1377 desc = &wc->w_desc[0];
1378 if (desc->c_needs_zero)
1379 ocfs2_figure_cluster_boundaries(osb,
1380 desc->c_cpos,
1381 &wc->w_target_from,
1382 NULL);
1384 desc = &wc->w_desc[wc->w_clen - 1];
1385 if (desc->c_needs_zero)
1386 ocfs2_figure_cluster_boundaries(osb,
1387 desc->c_cpos,
1388 NULL,
1389 &wc->w_target_to);
1390 } else {
1391 wc->w_target_from = 0;
1392 wc->w_target_to = PAGE_CACHE_SIZE;
1397 * Populate each single-cluster write descriptor in the write context
1398 * with information about the i/o to be done.
1400 * Returns the number of clusters that will have to be allocated, as
1401 * well as a worst case estimate of the number of extent records that
1402 * would have to be created during a write to an unwritten region.
1404 static int ocfs2_populate_write_desc(struct inode *inode,
1405 struct ocfs2_write_ctxt *wc,
1406 unsigned int *clusters_to_alloc,
1407 unsigned int *extents_to_split)
1409 int ret;
1410 struct ocfs2_write_cluster_desc *desc;
1411 unsigned int num_clusters = 0;
1412 unsigned int ext_flags = 0;
1413 u32 phys = 0;
1414 int i;
1416 *clusters_to_alloc = 0;
1417 *extents_to_split = 0;
1419 for (i = 0; i < wc->w_clen; i++) {
1420 desc = &wc->w_desc[i];
1421 desc->c_cpos = wc->w_cpos + i;
1423 if (num_clusters == 0) {
1425 * Need to look up the next extent record.
1427 ret = ocfs2_get_clusters(inode, desc->c_cpos, &phys,
1428 &num_clusters, &ext_flags);
1429 if (ret) {
1430 mlog_errno(ret);
1431 goto out;
1434 /* We should already CoW the refcountd extent. */
1435 BUG_ON(ext_flags & OCFS2_EXT_REFCOUNTED);
1438 * Assume worst case - that we're writing in
1439 * the middle of the extent.
1441 * We can assume that the write proceeds from
1442 * left to right, in which case the extent
1443 * insert code is smart enough to coalesce the
1444 * next splits into the previous records created.
1446 if (ext_flags & OCFS2_EXT_UNWRITTEN)
1447 *extents_to_split = *extents_to_split + 2;
1448 } else if (phys) {
1450 * Only increment phys if it doesn't describe
1451 * a hole.
1453 phys++;
1457 * If w_first_new_cpos is < UINT_MAX, we have a non-sparse
1458 * file that got extended. w_first_new_cpos tells us
1459 * where the newly allocated clusters are so we can
1460 * zero them.
1462 if (desc->c_cpos >= wc->w_first_new_cpos) {
1463 BUG_ON(phys == 0);
1464 desc->c_needs_zero = 1;
1467 desc->c_phys = phys;
1468 if (phys == 0) {
1469 desc->c_new = 1;
1470 desc->c_needs_zero = 1;
1471 *clusters_to_alloc = *clusters_to_alloc + 1;
1474 if (ext_flags & OCFS2_EXT_UNWRITTEN) {
1475 desc->c_unwritten = 1;
1476 desc->c_needs_zero = 1;
1479 num_clusters--;
1482 ret = 0;
1483 out:
1484 return ret;
1487 static int ocfs2_write_begin_inline(struct address_space *mapping,
1488 struct inode *inode,
1489 struct ocfs2_write_ctxt *wc)
1491 int ret;
1492 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1493 struct page *page;
1494 handle_t *handle;
1495 struct ocfs2_dinode *di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
1497 page = find_or_create_page(mapping, 0, GFP_NOFS);
1498 if (!page) {
1499 ret = -ENOMEM;
1500 mlog_errno(ret);
1501 goto out;
1504 * If we don't set w_num_pages then this page won't get unlocked
1505 * and freed on cleanup of the write context.
1507 wc->w_pages[0] = wc->w_target_page = page;
1508 wc->w_num_pages = 1;
1510 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1511 if (IS_ERR(handle)) {
1512 ret = PTR_ERR(handle);
1513 mlog_errno(ret);
1514 goto out;
1517 ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), wc->w_di_bh,
1518 OCFS2_JOURNAL_ACCESS_WRITE);
1519 if (ret) {
1520 ocfs2_commit_trans(osb, handle);
1522 mlog_errno(ret);
1523 goto out;
1526 if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL))
1527 ocfs2_set_inode_data_inline(inode, di);
1529 if (!PageUptodate(page)) {
1530 ret = ocfs2_read_inline_data(inode, page, wc->w_di_bh);
1531 if (ret) {
1532 ocfs2_commit_trans(osb, handle);
1534 goto out;
1538 wc->w_handle = handle;
1539 out:
1540 return ret;
1543 int ocfs2_size_fits_inline_data(struct buffer_head *di_bh, u64 new_size)
1545 struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
1547 if (new_size <= le16_to_cpu(di->id2.i_data.id_count))
1548 return 1;
1549 return 0;
1552 static int ocfs2_try_to_write_inline_data(struct address_space *mapping,
1553 struct inode *inode, loff_t pos,
1554 unsigned len, struct page *mmap_page,
1555 struct ocfs2_write_ctxt *wc)
1557 int ret, written = 0;
1558 loff_t end = pos + len;
1559 struct ocfs2_inode_info *oi = OCFS2_I(inode);
1560 struct ocfs2_dinode *di = NULL;
1562 mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n",
1563 (unsigned long long)oi->ip_blkno, len, (unsigned long long)pos,
1564 oi->ip_dyn_features);
1567 * Handle inodes which already have inline data 1st.
1569 if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1570 if (mmap_page == NULL &&
1571 ocfs2_size_fits_inline_data(wc->w_di_bh, end))
1572 goto do_inline_write;
1575 * The write won't fit - we have to give this inode an
1576 * inline extent list now.
1578 ret = ocfs2_convert_inline_data_to_extents(inode, wc->w_di_bh);
1579 if (ret)
1580 mlog_errno(ret);
1581 goto out;
1585 * Check whether the inode can accept inline data.
1587 if (oi->ip_clusters != 0 || i_size_read(inode) != 0)
1588 return 0;
1591 * Check whether the write can fit.
1593 di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
1594 if (mmap_page ||
1595 end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
1596 return 0;
1598 do_inline_write:
1599 ret = ocfs2_write_begin_inline(mapping, inode, wc);
1600 if (ret) {
1601 mlog_errno(ret);
1602 goto out;
1606 * This signals to the caller that the data can be written
1607 * inline.
1609 written = 1;
1610 out:
1611 return written ? written : ret;
1615 * This function only does anything for file systems which can't
1616 * handle sparse files.
1618 * What we want to do here is fill in any hole between the current end
1619 * of allocation and the end of our write. That way the rest of the
1620 * write path can treat it as an non-allocating write, which has no
1621 * special case code for sparse/nonsparse files.
1623 static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
1624 unsigned len,
1625 struct ocfs2_write_ctxt *wc)
1627 int ret;
1628 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1629 loff_t newsize = pos + len;
1631 if (ocfs2_sparse_alloc(osb))
1632 return 0;
1634 if (newsize <= i_size_read(inode))
1635 return 0;
1637 ret = ocfs2_extend_no_holes(inode, newsize, pos);
1638 if (ret)
1639 mlog_errno(ret);
1641 wc->w_first_new_cpos =
1642 ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
1644 return ret;
1647 int ocfs2_write_begin_nolock(struct address_space *mapping,
1648 loff_t pos, unsigned len, unsigned flags,
1649 struct page **pagep, void **fsdata,
1650 struct buffer_head *di_bh, struct page *mmap_page)
1652 int ret, cluster_of_pages, credits = OCFS2_INODE_UPDATE_CREDITS;
1653 unsigned int clusters_to_alloc, extents_to_split;
1654 struct ocfs2_write_ctxt *wc;
1655 struct inode *inode = mapping->host;
1656 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1657 struct ocfs2_dinode *di;
1658 struct ocfs2_alloc_context *data_ac = NULL;
1659 struct ocfs2_alloc_context *meta_ac = NULL;
1660 handle_t *handle;
1661 struct ocfs2_extent_tree et;
1663 ret = ocfs2_alloc_write_ctxt(&wc, osb, pos, len, di_bh);
1664 if (ret) {
1665 mlog_errno(ret);
1666 return ret;
1669 if (ocfs2_supports_inline_data(osb)) {
1670 ret = ocfs2_try_to_write_inline_data(mapping, inode, pos, len,
1671 mmap_page, wc);
1672 if (ret == 1) {
1673 ret = 0;
1674 goto success;
1676 if (ret < 0) {
1677 mlog_errno(ret);
1678 goto out;
1682 ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
1683 if (ret) {
1684 mlog_errno(ret);
1685 goto out;
1688 ret = ocfs2_check_range_for_refcount(inode, pos, len);
1689 if (ret < 0) {
1690 mlog_errno(ret);
1691 goto out;
1692 } else if (ret == 1) {
1693 ret = ocfs2_refcount_cow(inode, di_bh,
1694 wc->w_cpos, wc->w_clen, UINT_MAX);
1695 if (ret) {
1696 mlog_errno(ret);
1697 goto out;
1701 ret = ocfs2_populate_write_desc(inode, wc, &clusters_to_alloc,
1702 &extents_to_split);
1703 if (ret) {
1704 mlog_errno(ret);
1705 goto out;
1708 di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
1711 * We set w_target_from, w_target_to here so that
1712 * ocfs2_write_end() knows which range in the target page to
1713 * write out. An allocation requires that we write the entire
1714 * cluster range.
1716 if (clusters_to_alloc || extents_to_split) {
1718 * XXX: We are stretching the limits of
1719 * ocfs2_lock_allocators(). It greatly over-estimates
1720 * the work to be done.
1722 mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u,"
1723 " clusters_to_add = %u, extents_to_split = %u\n",
1724 (unsigned long long)OCFS2_I(inode)->ip_blkno,
1725 (long long)i_size_read(inode), le32_to_cpu(di->i_clusters),
1726 clusters_to_alloc, extents_to_split);
1728 ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode),
1729 wc->w_di_bh);
1730 ret = ocfs2_lock_allocators(inode, &et,
1731 clusters_to_alloc, extents_to_split,
1732 &data_ac, &meta_ac);
1733 if (ret) {
1734 mlog_errno(ret);
1735 goto out;
1738 credits = ocfs2_calc_extend_credits(inode->i_sb,
1739 &di->id2.i_list,
1740 clusters_to_alloc);
1745 * We have to zero sparse allocated clusters, unwritten extent clusters,
1746 * and non-sparse clusters we just extended. For non-sparse writes,
1747 * we know zeros will only be needed in the first and/or last cluster.
1749 if (clusters_to_alloc || extents_to_split ||
1750 (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
1751 wc->w_desc[wc->w_clen - 1].c_needs_zero)))
1752 cluster_of_pages = 1;
1753 else
1754 cluster_of_pages = 0;
1756 ocfs2_set_target_boundaries(osb, wc, pos, len, cluster_of_pages);
1758 handle = ocfs2_start_trans(osb, credits);
1759 if (IS_ERR(handle)) {
1760 ret = PTR_ERR(handle);
1761 mlog_errno(ret);
1762 goto out;
1765 wc->w_handle = handle;
1767 if (clusters_to_alloc) {
1768 ret = dquot_alloc_space_nodirty(inode,
1769 ocfs2_clusters_to_bytes(osb->sb, clusters_to_alloc));
1770 if (ret)
1771 goto out_commit;
1774 * We don't want this to fail in ocfs2_write_end(), so do it
1775 * here.
1777 ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), wc->w_di_bh,
1778 OCFS2_JOURNAL_ACCESS_WRITE);
1779 if (ret) {
1780 mlog_errno(ret);
1781 goto out_quota;
1785 * Fill our page array first. That way we've grabbed enough so
1786 * that we can zero and flush if we error after adding the
1787 * extent.
1789 ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
1790 cluster_of_pages, mmap_page);
1791 if (ret) {
1792 mlog_errno(ret);
1793 goto out_quota;
1796 ret = ocfs2_write_cluster_by_desc(mapping, data_ac, meta_ac, wc, pos,
1797 len);
1798 if (ret) {
1799 mlog_errno(ret);
1800 goto out_quota;
1803 if (data_ac)
1804 ocfs2_free_alloc_context(data_ac);
1805 if (meta_ac)
1806 ocfs2_free_alloc_context(meta_ac);
1808 success:
1809 *pagep = wc->w_target_page;
1810 *fsdata = wc;
1811 return 0;
1812 out_quota:
1813 if (clusters_to_alloc)
1814 dquot_free_space(inode,
1815 ocfs2_clusters_to_bytes(osb->sb, clusters_to_alloc));
1816 out_commit:
1817 ocfs2_commit_trans(osb, handle);
1819 out:
1820 ocfs2_free_write_ctxt(wc);
1822 if (data_ac)
1823 ocfs2_free_alloc_context(data_ac);
1824 if (meta_ac)
1825 ocfs2_free_alloc_context(meta_ac);
1826 return ret;
1829 static int ocfs2_write_begin(struct file *file, struct address_space *mapping,
1830 loff_t pos, unsigned len, unsigned flags,
1831 struct page **pagep, void **fsdata)
1833 int ret;
1834 struct buffer_head *di_bh = NULL;
1835 struct inode *inode = mapping->host;
1837 ret = ocfs2_inode_lock(inode, &di_bh, 1);
1838 if (ret) {
1839 mlog_errno(ret);
1840 return ret;
1844 * Take alloc sem here to prevent concurrent lookups. That way
1845 * the mapping, zeroing and tree manipulation within
1846 * ocfs2_write() will be safe against ->readpage(). This
1847 * should also serve to lock out allocation from a shared
1848 * writeable region.
1850 down_write(&OCFS2_I(inode)->ip_alloc_sem);
1852 ret = ocfs2_write_begin_nolock(mapping, pos, len, flags, pagep,
1853 fsdata, di_bh, NULL);
1854 if (ret) {
1855 mlog_errno(ret);
1856 goto out_fail;
1859 brelse(di_bh);
1861 return 0;
1863 out_fail:
1864 up_write(&OCFS2_I(inode)->ip_alloc_sem);
1866 brelse(di_bh);
1867 ocfs2_inode_unlock(inode, 1);
1869 return ret;
1872 static void ocfs2_write_end_inline(struct inode *inode, loff_t pos,
1873 unsigned len, unsigned *copied,
1874 struct ocfs2_dinode *di,
1875 struct ocfs2_write_ctxt *wc)
1877 void *kaddr;
1879 if (unlikely(*copied < len)) {
1880 if (!PageUptodate(wc->w_target_page)) {
1881 *copied = 0;
1882 return;
1886 kaddr = kmap_atomic(wc->w_target_page, KM_USER0);
1887 memcpy(di->id2.i_data.id_data + pos, kaddr + pos, *copied);
1888 kunmap_atomic(kaddr, KM_USER0);
1890 mlog(0, "Data written to inode at offset %llu. "
1891 "id_count = %u, copied = %u, i_dyn_features = 0x%x\n",
1892 (unsigned long long)pos, *copied,
1893 le16_to_cpu(di->id2.i_data.id_count),
1894 le16_to_cpu(di->i_dyn_features));
1897 int ocfs2_write_end_nolock(struct address_space *mapping,
1898 loff_t pos, unsigned len, unsigned copied,
1899 struct page *page, void *fsdata)
1901 int i;
1902 unsigned from, to, start = pos & (PAGE_CACHE_SIZE - 1);
1903 struct inode *inode = mapping->host;
1904 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1905 struct ocfs2_write_ctxt *wc = fsdata;
1906 struct ocfs2_dinode *di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
1907 handle_t *handle = wc->w_handle;
1908 struct page *tmppage;
1910 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1911 ocfs2_write_end_inline(inode, pos, len, &copied, di, wc);
1912 goto out_write_size;
1915 if (unlikely(copied < len)) {
1916 if (!PageUptodate(wc->w_target_page))
1917 copied = 0;
1919 ocfs2_zero_new_buffers(wc->w_target_page, start+copied,
1920 start+len);
1922 flush_dcache_page(wc->w_target_page);
1924 for(i = 0; i < wc->w_num_pages; i++) {
1925 tmppage = wc->w_pages[i];
1927 if (tmppage == wc->w_target_page) {
1928 from = wc->w_target_from;
1929 to = wc->w_target_to;
1931 BUG_ON(from > PAGE_CACHE_SIZE ||
1932 to > PAGE_CACHE_SIZE ||
1933 to < from);
1934 } else {
1936 * Pages adjacent to the target (if any) imply
1937 * a hole-filling write in which case we want
1938 * to flush their entire range.
1940 from = 0;
1941 to = PAGE_CACHE_SIZE;
1944 if (page_has_buffers(tmppage)) {
1945 if (ocfs2_should_order_data(inode))
1946 ocfs2_jbd2_file_inode(wc->w_handle, inode);
1947 block_commit_write(tmppage, from, to);
1951 out_write_size:
1952 pos += copied;
1953 if (pos > inode->i_size) {
1954 i_size_write(inode, pos);
1955 mark_inode_dirty(inode);
1957 inode->i_blocks = ocfs2_inode_sector_count(inode);
1958 di->i_size = cpu_to_le64((u64)i_size_read(inode));
1959 inode->i_mtime = inode->i_ctime = CURRENT_TIME;
1960 di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
1961 di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
1962 ocfs2_journal_dirty(handle, wc->w_di_bh);
1964 ocfs2_commit_trans(osb, handle);
1966 ocfs2_run_deallocs(osb, &wc->w_dealloc);
1968 ocfs2_free_write_ctxt(wc);
1970 return copied;
1973 static int ocfs2_write_end(struct file *file, struct address_space *mapping,
1974 loff_t pos, unsigned len, unsigned copied,
1975 struct page *page, void *fsdata)
1977 int ret;
1978 struct inode *inode = mapping->host;
1980 ret = ocfs2_write_end_nolock(mapping, pos, len, copied, page, fsdata);
1982 up_write(&OCFS2_I(inode)->ip_alloc_sem);
1983 ocfs2_inode_unlock(inode, 1);
1985 return ret;
1988 const struct address_space_operations ocfs2_aops = {
1989 .readpage = ocfs2_readpage,
1990 .readpages = ocfs2_readpages,
1991 .writepage = ocfs2_writepage,
1992 .write_begin = ocfs2_write_begin,
1993 .write_end = ocfs2_write_end,
1994 .bmap = ocfs2_bmap,
1995 .sync_page = block_sync_page,
1996 .direct_IO = ocfs2_direct_IO,
1997 .invalidatepage = ocfs2_invalidatepage,
1998 .releasepage = ocfs2_releasepage,
1999 .migratepage = buffer_migrate_page,
2000 .is_partially_uptodate = block_is_partially_uptodate,
2001 .error_remove_page = generic_error_remove_page,