arch/arm/mach-omap2/board-omap3touchbook.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-omap3touchbook.c
   3  *
   4  * Copyright (C) 2009 Always Innovating
   5  *
   6  * Modified from mach-omap2/board-omap3beagleboard.c
   7  *
   8  * Initial code: Grégoire Gentil, Tim Yamin
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/err.h>
  20 #include <linux/clk.h>
  21 #include <linux/io.h>
  22 #include <linux/leds.h>
  23 #include <linux/gpio.h>
  24 #include <linux/input.h>
  25 #include <linux/gpio_keys.h>
  26
  27 #include <linux/mtd/mtd.h>
  28 #include <linux/mtd/partitions.h>
  29 #include <linux/mtd/nand.h>
  30 #include <linux/mmc/host.h>
  31
  32 #include <plat/mcspi.h>
  33 #include <linux/spi/spi.h>
  34
  35 #include <linux/spi/ads7846.h>
  36
  37 #include <linux/regulator/machine.h>
  38 #include <linux/i2c/twl.h>
  39
  40 #include <mach/hardware.h>
  41 #include <asm/mach-types.h>
  42 #include <asm/mach/arch.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/flash.h>
  45
  46 #include <plat/board.h>
  47 #include <plat/common.h>
  48 #include <plat/gpmc.h>
  49 #include <plat/nand.h>
  50 #include <plat/usb.h>
  51
  52 #include "mux.h"
  53 #include "hsmmc.h"
  54 #include "timer-gp.h"
  55 #include "common-board-devices.h"
  56
  57 #include <asm/setup.h>
  58
  59 #define NAND_BLOCK_SIZE         SZ_128K
  60
  61 #define OMAP3_AC_GPIO           136
  62 #define OMAP3_TS_GPIO           162
  63 #define TB_BL_PWM_TIMER         9
  64 #define TB_KILL_POWER_GPIO      168
  65
  66 static unsigned long touchbook_revision;
  67
  68 static struct mtd_partition omap3touchbook_nand_partitions[] = {
  69         /* All the partition sizes are listed in terms of NAND block size */
  70         {
  71                 .name           = "X-Loader",
  72                 .offset         = 0,
  73                 .size           = 4 * NAND_BLOCK_SIZE,
  74                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
  75         },
  76         {
  77                 .name           = "U-Boot",
  78                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
  79                 .size           = 15 * NAND_BLOCK_SIZE,
  80                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
  81         },
  82         {
  83                 .name           = "U-Boot Env",
  84                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x260000 */
  85                 .size           = 1 * NAND_BLOCK_SIZE,
  86         },
  87         {
  88                 .name           = "Kernel",
  89                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x280000 */
  90                 .size           = 32 * NAND_BLOCK_SIZE,
  91         },
  92         {
  93                 .name           = "File System",
  94                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x680000 */
  95                 .size           = MTDPART_SIZ_FULL,
  96         },
  97 };
  98
  99 #include "sdram-micron-mt46h32m32lf-6.h"
 100
 101 static struct omap2_hsmmc_info mmc[] = {
 102         {
 103                 .mmc            = 1,
 104                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 105                 .gpio_wp        = 29,
 106         },
 107         {}      /* Terminator */
 108 };
 109
 110 static struct platform_device omap3_touchbook_lcd_device = {
 111         .name           = "omap3touchbook_lcd",
 112         .id             = -1,
 113 };
 114
 115 static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
 116         .ctrl_name      = "internal",
 117 };
 118
 119 static struct regulator_consumer_supply touchbook_vmmc1_supply = {
 120         .supply                 = "vmmc",
 121 };
 122
 123 static struct regulator_consumer_supply touchbook_vsim_supply = {
 124         .supply                 = "vmmc_aux",
 125 };
 126
 127 static struct gpio_led gpio_leds[];
 128
 129 static int touchbook_twl_gpio_setup(struct device *dev,
 130                 unsigned gpio, unsigned ngpio)
 131 {
 132         if (system_rev >= 0x20 && system_rev <= 0x34301000) {
 133                 omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 134                 mmc[0].gpio_wp = 23;
 135         } else {
 136                 omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 137         }
 138         /* gpio + 0 is "mmc0_cd" (input/IRQ) */
 139         mmc[0].gpio_cd = gpio + 0;
 140         omap2_hsmmc_init(mmc);
 141
 142         /* link regulators to MMC adapters */
 143         touchbook_vmmc1_supply.dev = mmc[0].dev;
 144         touchbook_vsim_supply.dev = mmc[0].dev;
 145
 146         /* REVISIT: need ehci-omap hooks for external VBUS
 147          * power switch and overcurrent detect
 148          */
 149
 150         gpio_request(gpio + 1, "EHCI_nOC");
 151         gpio_direction_input(gpio + 1);
 152
 153         /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
 154         gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
 155         gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 156
 157         /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 158         gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 159
 160         return 0;
 161 }
 162
 163 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
 164         .gpio_base      = OMAP_MAX_GPIO_LINES,
 165         .irq_base       = TWL4030_GPIO_IRQ_BASE,
 166         .irq_end        = TWL4030_GPIO_IRQ_END,
 167         .use_leds       = true,
 168         .pullups        = BIT(1),
 169         .pulldowns      = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
 170                                 | BIT(15) | BIT(16) | BIT(17),
 171         .setup          = touchbook_twl_gpio_setup,
 172 };
 173
 174 static struct regulator_consumer_supply touchbook_vdac_supply = {
 175         .supply         = "vdac",
 176         .dev            = &omap3_touchbook_lcd_device.dev,
 177 };
 178
 179 static struct regulator_consumer_supply touchbook_vdvi_supply = {
 180         .supply         = "vdvi",
 181         .dev            = &omap3_touchbook_lcd_device.dev,
 182 };
 183
 184 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 185 static struct regulator_init_data touchbook_vmmc1 = {
 186         .constraints = {
 187                 .min_uV                 = 1850000,
 188                 .max_uV                 = 3150000,
 189                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 190                                         | REGULATOR_MODE_STANDBY,
 191                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 192                                         | REGULATOR_CHANGE_MODE
 193                                         | REGULATOR_CHANGE_STATUS,
 194         },
 195         .num_consumer_supplies  = 1,
 196         .consumer_supplies      = &touchbook_vmmc1_supply,
 197 };
 198
 199 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
 200 static struct regulator_init_data touchbook_vsim = {
 201         .constraints = {
 202                 .min_uV                 = 1800000,
 203                 .max_uV                 = 3000000,
 204                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 205                                         | REGULATOR_MODE_STANDBY,
 206                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 207                                         | REGULATOR_CHANGE_MODE
 208                                         | REGULATOR_CHANGE_STATUS,
 209         },
 210         .num_consumer_supplies  = 1,
 211         .consumer_supplies      = &touchbook_vsim_supply,
 212 };
 213
 214 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
 215 static struct regulator_init_data touchbook_vdac = {
 216         .constraints = {
 217                 .min_uV                 = 1800000,
 218                 .max_uV                 = 1800000,
 219                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 220                                         | REGULATOR_MODE_STANDBY,
 221                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 222                                         | REGULATOR_CHANGE_STATUS,
 223         },
 224         .num_consumer_supplies  = 1,
 225         .consumer_supplies      = &touchbook_vdac_supply,
 226 };
 227
 228 /* VPLL2 for digital video outputs */
 229 static struct regulator_init_data touchbook_vpll2 = {
 230         .constraints = {
 231                 .name                   = "VDVI",
 232                 .min_uV                 = 1800000,
 233                 .max_uV                 = 1800000,
 234                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 235                                         | REGULATOR_MODE_STANDBY,
 236                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 237                                         | REGULATOR_CHANGE_STATUS,
 238         },
 239         .num_consumer_supplies  = 1,
 240         .consumer_supplies      = &touchbook_vdvi_supply,
 241 };
 242
 243 static struct twl4030_usb_data touchbook_usb_data = {
 244         .usb_mode       = T2_USB_MODE_ULPI,
 245 };
 246
 247 static struct twl4030_codec_audio_data touchbook_audio_data;
 248
 249 static struct twl4030_codec_data touchbook_codec_data = {
 250         .audio_mclk = 26000000,
 251         .audio = &touchbook_audio_data,
 252 };
 253
 254 static struct twl4030_platform_data touchbook_twldata = {
 255         .irq_base       = TWL4030_IRQ_BASE,
 256         .irq_end        = TWL4030_IRQ_END,
 257
 258         /* platform_data for children goes here */
 259         .usb            = &touchbook_usb_data,
 260         .gpio           = &touchbook_gpio_data,
 261         .codec          = &touchbook_codec_data,
 262         .vmmc1          = &touchbook_vmmc1,
 263         .vsim           = &touchbook_vsim,
 264         .vdac           = &touchbook_vdac,
 265         .vpll2          = &touchbook_vpll2,
 266 };
 267
 268 static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
 269         {
 270                 I2C_BOARD_INFO("bq27200", 0x55),
 271         },
 272 };
 273
 274 static int __init omap3_touchbook_i2c_init(void)
 275 {
 276         /* Standard TouchBook bus */
 277         omap3_pmic_init("twl4030", &touchbook_twldata);
 278
 279         /* Additional TouchBook bus */
 280         omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
 281                         ARRAY_SIZE(touchBook_i2c_boardinfo));
 282
 283         return 0;
 284 }
 285
 286 static struct ads7846_platform_data ads7846_pdata = {
 287         .x_min                  = 100,
 288         .y_min                  = 265,
 289         .x_max                  = 3950,
 290         .y_max                  = 3750,
 291         .x_plate_ohms           = 40,
 292         .pressure_max           = 255,
 293         .debounce_max           = 10,
 294         .debounce_tol           = 5,
 295         .debounce_rep           = 1,
 296         .gpio_pendown           = OMAP3_TS_GPIO,
 297         .keep_vref_on           = 1,
 298 };
 299
 300 static struct gpio_led gpio_leds[] = {
 301         {
 302                 .name                   = "touchbook::usr0",
 303                 .default_trigger        = "heartbeat",
 304                 .gpio                   = 150,
 305         },
 306         {
 307                 .name                   = "touchbook::usr1",
 308                 .default_trigger        = "mmc0",
 309                 .gpio                   = 149,
 310         },
 311         {
 312                 .name                   = "touchbook::pmu_stat",
 313                 .gpio                   = -EINVAL,      /* gets replaced */
 314                 .active_low             = true,
 315         },
 316 };
 317
 318 static struct gpio_led_platform_data gpio_led_info = {
 319         .leds           = gpio_leds,
 320         .num_leds       = ARRAY_SIZE(gpio_leds),
 321 };
 322
 323 static struct platform_device leds_gpio = {
 324         .name   = "leds-gpio",
 325         .id     = -1,
 326         .dev    = {
 327                 .platform_data  = &gpio_led_info,
 328         },
 329 };
 330
 331 static struct gpio_keys_button gpio_buttons[] = {
 332         {
 333                 .code                   = BTN_EXTRA,
 334                 .gpio                   = 7,
 335                 .desc                   = "user",
 336                 .wakeup                 = 1,
 337         },
 338         {
 339                 .code                   = KEY_POWER,
 340                 .gpio                   = 183,
 341                 .desc                   = "power",
 342                 .wakeup                 = 1,
 343         },
 344 };
 345
 346 static struct gpio_keys_platform_data gpio_key_info = {
 347         .buttons        = gpio_buttons,
 348         .nbuttons       = ARRAY_SIZE(gpio_buttons),
 349 };
 350
 351 static struct platform_device keys_gpio = {
 352         .name   = "gpio-keys",
 353         .id     = -1,
 354         .dev    = {
 355                 .platform_data  = &gpio_key_info,
 356         },
 357 };
 358
 359 static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
 360         { OMAP_TAG_LCD,         &omap3_touchbook_lcd_config },
 361 };
 362
 363 #ifdef CONFIG_OMAP_MUX
 364 static struct omap_board_mux board_mux[] __initdata = {
 365         { .reg_offset = OMAP_MUX_TERMINATOR },
 366 };
 367 #endif
 368
 369 static void __init omap3_touchbook_init_early(void)
 370 {
 371         omap2_init_common_infrastructure();
 372         omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 373                                   mt46h32m32lf6_sdrc_params);
 374 }
 375
 376 static void __init omap3_touchbook_init_irq(void)
 377 {
 378         omap_init_irq();
 379 #ifdef CONFIG_OMAP_32K_TIMER
 380         omap2_gp_clockevent_set_gptimer(12);
 381 #endif
 382 }
 383
 384 static struct platform_device *omap3_touchbook_devices[] __initdata = {
 385         &omap3_touchbook_lcd_device,
 386         &leds_gpio,
 387         &keys_gpio,
 388 };
 389
 390 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 391
 392         .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 393         .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 394         .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 395
 396         .phy_reset  = true,
 397         .reset_gpio_port[0]  = -EINVAL,
 398         .reset_gpio_port[1]  = 147,
 399         .reset_gpio_port[2]  = -EINVAL
 400 };
 401
 402 static void omap3_touchbook_poweroff(void)
 403 {
 404         int r;
 405
 406         r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
 407         if (r < 0) {
 408                 printk(KERN_ERR "Unable to get kill power GPIO\n");
 409                 return;
 410         }
 411
 412         gpio_direction_output(TB_KILL_POWER_GPIO, 0);
 413 }
 414
 415 static int __init early_touchbook_revision(char *p)
 416 {
 417         if (!p)
 418                 return 0;
 419
 420         return strict_strtoul(p, 10, &touchbook_revision);
 421 }
 422 early_param("tbr", early_touchbook_revision);
 423
 424 static void __init omap3_touchbook_init(void)
 425 {
 426         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 427         omap_board_config = omap3_touchbook_config;
 428         omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
 429
 430         pm_power_off = omap3_touchbook_poweroff;
 431
 432         omap3_touchbook_i2c_init();
 433         platform_add_devices(omap3_touchbook_devices,
 434                         ARRAY_SIZE(omap3_touchbook_devices));
 435         omap_serial_init();
 436
 437         omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 438         gpio_request(176, "DVI_nPD");
 439         /* REVISIT leave DVI powered down until it's needed ... */
 440         gpio_direction_output(176, true);
 441
 442         /* Touchscreen and accelerometer */
 443         omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 444         usb_musb_init(NULL);
 445         usbhs_init(&usbhs_bdata);
 446         omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
 447                              ARRAY_SIZE(omap3touchbook_nand_partitions));
 448
 449         /* Ensure SDRC pins are mux'd for self-refresh */
 450         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 451         omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 452 }
 453
 454 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 455         /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 456         .boot_params    = 0x80000100,
 457         .reserve        = omap_reserve,
 458         .map_io         = omap3_map_io,
 459         .init_early     = omap3_touchbook_init_early,
 460         .init_irq       = omap3_touchbook_init_irq,
 461         .init_machine   = omap3_touchbook_init,
 462         .timer          = &omap_timer,
 463 MACHINE_END