2 * Sun3 i82586 Ethernet driver
4 * Cloned from ni52.c for the Sun3 by Sam Creasey (sammy@sammy.net)
6 * Original copyright follows:
7 * --------------------------
9 * net-3-driver for the NI5210 card (i82586 Ethernet chip)
11 * This is an extension to the Linux operating system, and is covered by the
12 * same Gnu Public License that covers that work.
14 * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
15 * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
16 * --------------------------
18 * Consult ni52.c for further notes from the original driver.
20 * This incarnation currently supports the OBIO version of the i82586 chip
21 * used in certain sun3 models. It should be fairly doable to expand this
22 * to support VME if I should every acquire such a board.
26 static int debuglevel
= 0; /* debug-printk 0: off 1: a few 2: more */
27 static int automatic_resume
= 0; /* experimental .. better should be zero */
28 static int rfdadd
= 0; /* rfdadd=1 may be better for 8K MEM cards */
29 static int fifo
=0x8; /* don't change */
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/string.h>
34 #include <linux/errno.h>
35 #include <linux/ioport.h>
36 #include <linux/interrupt.h>
37 #include <linux/delay.h>
38 #include <linux/init.h>
39 #include <linux/bitops.h>
41 #include <asm/idprom.h>
42 #include <asm/machines.h>
43 #include <asm/sun3mmu.h>
45 #include <asm/byteorder.h>
47 #include <linux/netdevice.h>
48 #include <linux/etherdevice.h>
49 #include <linux/skbuff.h>
51 #include "sun3_82586.h"
53 #define DRV_NAME "sun3_82586"
55 #define DEBUG /* debug on */
56 #define SYSBUSVAL 0 /* 16 Bit */
57 #define SUN3_82586_TOTAL_SIZE PAGE_SIZE
59 #define sun3_attn586() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_ATTEN; *(volatile unsigned char *)(dev->base_addr) &= ~IEOB_ATTEN;}
60 #define sun3_reset586() {*(volatile unsigned char *)(dev->base_addr) = 0; udelay(100); *(volatile unsigned char *)(dev->base_addr) = IEOB_NORSET;}
61 #define sun3_disint() {*(volatile unsigned char *)(dev->base_addr) &= ~IEOB_IENAB;}
62 #define sun3_enaint() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_IENAB;}
63 #define sun3_active() {*(volatile unsigned char *)(dev->base_addr) |= (IEOB_IENAB|IEOB_ONAIR|IEOB_NORSET);}
65 #define make32(ptr16) (p->memtop + (swab16((unsigned short) (ptr16))) )
66 #define make24(ptr32) (char *)swab32(( ((unsigned long) (ptr32)) - p->base))
67 #define make16(ptr32) (swab16((unsigned short) ((unsigned long)(ptr32) - (unsigned long) p->memtop )))
69 /******************* how to calculate the buffers *****************************
71 * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
72 * --------------- in a different (more stable?) mode. Only in this mode it's
73 * possible to configure the driver with 'NO_NOPCOMMANDS'
75 sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
76 sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
77 sizeof(rfd) = 24; sizeof(rbd) = 12;
78 sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
81 * if you don't know the driver, better do not change these values: */
83 #define RECV_BUFF_SIZE 1536 /* slightly oversized */
84 #define XMIT_BUFF_SIZE 1536 /* slightly oversized */
85 #define NUM_XMIT_BUFFS 1 /* config for 32K shmem */
86 #define NUM_RECV_BUFFS_8 4 /* config for 32K shared mem */
87 #define NUM_RECV_BUFFS_16 9 /* config for 32K shared mem */
88 #define NUM_RECV_BUFFS_32 16 /* config for 32K shared mem */
89 #define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
91 /**************************************************************************/
93 /* different DELAYs */
94 #define DELAY(x) mdelay(32 * x);
95 #define DELAY_16(); { udelay(16); }
96 #define DELAY_18(); { udelay(4); }
98 /* wait for command with timeout: */
99 #define WAIT_4_SCB_CMD() \
101 for(i=0;i<16384;i++) { \
102 if(!p->scb->cmd_cuc) break; \
105 printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \
106 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
108 #define WAIT_4_SCB_CMD_RUC() { int i; \
109 for(i=0;i<16384;i++) { \
110 if(!p->scb->cmd_ruc) break; \
113 printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \
114 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
116 #define WAIT_4_STAT_COMPL(addr) { int i; \
117 for(i=0;i<32767;i++) { \
118 if(swab16((addr)->cmd_status) & STAT_COMPL) break; \
119 DELAY_16(); DELAY_16(); } }
121 static int sun3_82586_probe1(struct net_device
*dev
,int ioaddr
);
122 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
);
123 static int sun3_82586_open(struct net_device
*dev
);
124 static int sun3_82586_close(struct net_device
*dev
);
125 static int sun3_82586_send_packet(struct sk_buff
*,struct net_device
*);
126 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
);
127 static void set_multicast_list(struct net_device
*dev
);
128 static void sun3_82586_timeout(struct net_device
*dev
);
130 static void sun3_82586_dump(struct net_device
*,void *);
133 /* helper-functions */
134 static int init586(struct net_device
*dev
);
135 static int check586(struct net_device
*dev
,char *where
,unsigned size
);
136 static void alloc586(struct net_device
*dev
);
137 static void startrecv586(struct net_device
*dev
);
138 static void *alloc_rfa(struct net_device
*dev
,void *ptr
);
139 static void sun3_82586_rcv_int(struct net_device
*dev
);
140 static void sun3_82586_xmt_int(struct net_device
*dev
);
141 static void sun3_82586_rnr_int(struct net_device
*dev
);
145 struct net_device_stats stats
;
150 volatile struct rfd_struct
*rfd_last
,*rfd_top
,*rfd_first
;
151 volatile struct scp_struct
*scp
; /* volatile is important */
152 volatile struct iscp_struct
*iscp
; /* volatile is important */
153 volatile struct scb_struct
*scb
; /* volatile is important */
154 volatile struct tbd_struct
*xmit_buffs
[NUM_XMIT_BUFFS
];
155 volatile struct transmit_cmd_struct
*xmit_cmds
[NUM_XMIT_BUFFS
];
156 #if (NUM_XMIT_BUFFS == 1)
157 volatile struct nop_cmd_struct
*nop_cmds
[2];
159 volatile struct nop_cmd_struct
*nop_cmds
[NUM_XMIT_BUFFS
];
161 volatile int nop_point
,num_recv_buffs
;
162 volatile char *xmit_cbuffs
[NUM_XMIT_BUFFS
];
163 volatile int xmit_count
,xmit_last
;
166 /**********************************************
169 static int sun3_82586_close(struct net_device
*dev
)
171 free_irq(dev
->irq
, dev
);
173 sun3_reset586(); /* the hard way to stop the receiver */
175 netif_stop_queue(dev
);
180 /**********************************************
183 static int sun3_82586_open(struct net_device
*dev
)
193 ret
= request_irq(dev
->irq
, sun3_82586_interrupt
,0,dev
->name
,dev
);
200 netif_start_queue(dev
);
202 return 0; /* most done by init */
205 /**********************************************
206 * Check to see if there's an 82586 out there.
208 static int check586(struct net_device
*dev
,char *where
,unsigned size
)
211 struct priv
*p
= &pb
;
215 p
->base
= (unsigned long) dvma_btov(0);
216 p
->memtop
= (char *)dvma_btov((unsigned long)where
);
217 p
->scp
= (struct scp_struct
*)(p
->base
+ SCP_DEFAULT_ADDRESS
);
218 memset((char *)p
->scp
,0, sizeof(struct scp_struct
));
219 for(i
=0;i
<sizeof(struct scp_struct
);i
++) /* memory was writeable? */
220 if(((char *)p
->scp
)[i
])
222 p
->scp
->sysbus
= SYSBUSVAL
; /* 1 = 8Bit-Bus, 0 = 16 Bit */
223 if(p
->scp
->sysbus
!= SYSBUSVAL
)
226 iscp_addr
= (char *)dvma_btov((unsigned long)where
);
228 p
->iscp
= (struct iscp_struct
*) iscp_addr
;
229 memset((char *)p
->iscp
,0, sizeof(struct iscp_struct
));
231 p
->scp
->iscp
= make24(p
->iscp
);
236 DELAY(1); /* wait a while... */
238 if(p
->iscp
->busy
) /* i82586 clears 'busy' after successful init */
244 /******************************************************************
245 * set iscp at the right place, called by sun3_82586_probe1 and open586.
247 static void alloc586(struct net_device
*dev
)
249 struct priv
*p
= netdev_priv(dev
);
254 p
->scp
= (struct scp_struct
*) (p
->base
+ SCP_DEFAULT_ADDRESS
);
255 p
->iscp
= (struct iscp_struct
*) dvma_btov(dev
->mem_start
);
256 p
->scb
= (struct scb_struct
*) ((char *)p
->iscp
+ sizeof(struct iscp_struct
));
258 memset((char *) p
->iscp
,0,sizeof(struct iscp_struct
));
259 memset((char *) p
->scp
,0,sizeof(struct scp_struct
));
261 p
->scp
->iscp
= make24(p
->iscp
);
262 p
->scp
->sysbus
= SYSBUSVAL
;
263 p
->iscp
->scb_offset
= make16(p
->scb
);
264 p
->iscp
->scb_base
= make24(dvma_btov(dev
->mem_start
));
273 printk("%s: Init-Problems (alloc).\n",dev
->name
);
277 memset((char *)p
->scb
,0,sizeof(struct scb_struct
));
280 struct net_device
* __init
sun3_82586_probe(int unit
)
282 struct net_device
*dev
;
283 unsigned long ioaddr
;
284 static int found
= 0;
287 /* check that this machine has an onboard 82586 */
288 switch(idprom
->id_machtype
) {
289 case SM_SUN3
|SM_3_160
:
290 case SM_SUN3
|SM_3_260
:
291 /* these machines have 82586 */
295 return ERR_PTR(-ENODEV
);
299 return ERR_PTR(-ENODEV
);
301 ioaddr
= (unsigned long)ioremap(IE_OBIO
, SUN3_82586_TOTAL_SIZE
);
303 return ERR_PTR(-ENOMEM
);
306 dev
= alloc_etherdev(sizeof(struct priv
));
310 sprintf(dev
->name
, "eth%d", unit
);
311 netdev_boot_setup_check(dev
);
315 dev
->base_addr
= ioaddr
;
316 err
= sun3_82586_probe1(dev
, ioaddr
);
319 err
= register_netdev(dev
);
325 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
329 iounmap((void __iomem
*)ioaddr
);
333 static const struct net_device_ops sun3_82586_netdev_ops
= {
334 .ndo_open
= sun3_82586_open
,
335 .ndo_stop
= sun3_82586_close
,
336 .ndo_start_xmit
= sun3_82586_send_packet
,
337 .ndo_set_multicast_list
= set_multicast_list
,
338 .ndo_tx_timeout
= sun3_82586_timeout
,
339 .ndo_get_stats
= sun3_82586_get_stats
,
340 .ndo_validate_addr
= eth_validate_addr
,
341 .ndo_set_mac_address
= eth_mac_addr
,
342 .ndo_change_mtu
= eth_change_mtu
,
345 static int __init
sun3_82586_probe1(struct net_device
*dev
,int ioaddr
)
349 if (!request_region(ioaddr
, SUN3_82586_TOTAL_SIZE
, DRV_NAME
))
352 /* copy in the ethernet address from the prom */
353 for(i
= 0; i
< 6 ; i
++)
354 dev
->dev_addr
[i
] = idprom
->id_ethaddr
[i
];
356 printk("%s: SUN3 Intel 82586 found at %lx, ",dev
->name
,dev
->base_addr
);
359 * check (or search) IO-Memory, 32K
363 dev
->mem_start
= (unsigned long)dvma_malloc_align(0x8000, 0x1000);
364 dev
->mem_end
= dev
->mem_start
+ size
;
366 if(size
!= 0x2000 && size
!= 0x4000 && size
!= 0x8000) {
367 printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev
->name
,size
);
371 if(!check586(dev
,(char *) dev
->mem_start
,size
)) {
372 printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev
->mem_start
,size
);
377 ((struct priv
*)netdev_priv(dev
))->memtop
=
378 (char *)dvma_btov(dev
->mem_start
);
379 ((struct priv
*)netdev_priv(dev
))->base
= (unsigned long) dvma_btov(0);
382 /* set number of receive-buffs according to memsize */
384 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
386 else if(size
== 0x4000)
387 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
390 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
393 printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev
->mem_start
,size
, dev
->irq
);
395 dev
->netdev_ops
= &sun3_82586_netdev_ops
;
396 dev
->watchdog_timeo
= HZ
/20;
401 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
406 static int init586(struct net_device
*dev
)
410 struct priv
*p
= netdev_priv(dev
);
411 volatile struct configure_cmd_struct
*cfg_cmd
;
412 volatile struct iasetup_cmd_struct
*ias_cmd
;
413 volatile struct tdr_cmd_struct
*tdr_cmd
;
414 volatile struct mcsetup_cmd_struct
*mc_cmd
;
415 struct netdev_hw_addr
*ha
;
416 int num_addrs
=netdev_mc_count(dev
);
418 ptr
= (void *) ((char *)p
->scb
+ sizeof(struct scb_struct
));
420 cfg_cmd
= (struct configure_cmd_struct
*)ptr
; /* configure-command */
421 cfg_cmd
->cmd_status
= 0;
422 cfg_cmd
->cmd_cmd
= swab16(CMD_CONFIGURE
| CMD_LAST
);
423 cfg_cmd
->cmd_link
= 0xffff;
425 cfg_cmd
->byte_cnt
= 0x0a; /* number of cfg bytes */
426 cfg_cmd
->fifo
= fifo
; /* fifo-limit (8=tx:32/rx:64) */
427 cfg_cmd
->sav_bf
= 0x40; /* hold or discard bad recv frames (bit 7) */
428 cfg_cmd
->adr_len
= 0x2e; /* addr_len |!src_insert |pre-len |loopback */
429 cfg_cmd
->priority
= 0x00;
431 cfg_cmd
->time_low
= 0x00;
432 cfg_cmd
->time_high
= 0xf2;
433 cfg_cmd
->promisc
= 0;
434 if(dev
->flags
& IFF_ALLMULTI
) {
435 int len
= ((char *) p
->iscp
- (char *) ptr
- 8) / 6;
436 if(num_addrs
> len
) {
437 printk("%s: switching to promisc. mode\n",dev
->name
);
438 cfg_cmd
->promisc
= 1;
441 if(dev
->flags
&IFF_PROMISC
)
442 cfg_cmd
->promisc
= 1;
443 cfg_cmd
->carr_coll
= 0x00;
445 p
->scb
->cbl_offset
= make16(cfg_cmd
);
448 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
451 WAIT_4_STAT_COMPL(cfg_cmd
);
453 if((swab16(cfg_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_COMPL
|STAT_OK
))
455 printk("%s: configure command failed: %x\n",dev
->name
,swab16(cfg_cmd
->cmd_status
));
460 * individual address setup
463 ias_cmd
= (struct iasetup_cmd_struct
*)ptr
;
465 ias_cmd
->cmd_status
= 0;
466 ias_cmd
->cmd_cmd
= swab16(CMD_IASETUP
| CMD_LAST
);
467 ias_cmd
->cmd_link
= 0xffff;
469 memcpy((char *)&ias_cmd
->iaddr
,(char *) dev
->dev_addr
,ETH_ALEN
);
471 p
->scb
->cbl_offset
= make16(ias_cmd
);
473 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
476 WAIT_4_STAT_COMPL(ias_cmd
);
478 if((swab16(ias_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_OK
|STAT_COMPL
)) {
479 printk("%s (82586): individual address setup command failed: %04x\n",dev
->name
,swab16(ias_cmd
->cmd_status
));
484 * TDR, wire check .. e.g. no resistor e.t.c
487 tdr_cmd
= (struct tdr_cmd_struct
*)ptr
;
489 tdr_cmd
->cmd_status
= 0;
490 tdr_cmd
->cmd_cmd
= swab16(CMD_TDR
| CMD_LAST
);
491 tdr_cmd
->cmd_link
= 0xffff;
494 p
->scb
->cbl_offset
= make16(tdr_cmd
);
495 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
498 WAIT_4_STAT_COMPL(tdr_cmd
);
500 if(!(swab16(tdr_cmd
->cmd_status
) & STAT_COMPL
))
502 printk("%s: Problems while running the TDR.\n",dev
->name
);
506 DELAY_16(); /* wait for result */
507 result
= swab16(tdr_cmd
->status
);
509 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
510 sun3_attn586(); /* ack the interrupts */
512 if(result
& TDR_LNK_OK
)
514 else if(result
& TDR_XCVR_PRB
)
515 printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev
->name
);
516 else if(result
& TDR_ET_OPN
)
517 printk("%s: TDR: No correct termination %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
518 else if(result
& TDR_ET_SRT
)
520 if (result
& TDR_TIMEMASK
) /* time == 0 -> strange :-) */
521 printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
524 printk("%s: TDR: Unknown status %04x\n",dev
->name
,result
);
530 if(num_addrs
&& !(dev
->flags
& IFF_PROMISC
) )
532 mc_cmd
= (struct mcsetup_cmd_struct
*) ptr
;
533 mc_cmd
->cmd_status
= 0;
534 mc_cmd
->cmd_cmd
= swab16(CMD_MCSETUP
| CMD_LAST
);
535 mc_cmd
->cmd_link
= 0xffff;
536 mc_cmd
->mc_cnt
= swab16(num_addrs
* 6);
539 netdev_for_each_mc_addr(ha
, dev
)
540 memcpy((char *) mc_cmd
->mc_list
[i
++],
543 p
->scb
->cbl_offset
= make16(mc_cmd
);
544 p
->scb
->cmd_cuc
= CUC_START
;
547 WAIT_4_STAT_COMPL(mc_cmd
);
549 if( (swab16(mc_cmd
->cmd_status
) & (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
550 printk("%s: Can't apply multicast-address-list.\n",dev
->name
);
554 * alloc nop/xmit-cmds
556 #if (NUM_XMIT_BUFFS == 1)
559 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
560 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
561 p
->nop_cmds
[i
]->cmd_status
= 0;
562 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
563 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
566 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
568 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
569 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
570 p
->nop_cmds
[i
]->cmd_status
= 0;
571 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
572 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
576 ptr
= alloc_rfa(dev
,(void *)ptr
); /* init receive-frame-area */
579 * alloc xmit-buffs / init xmit_cmds
581 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
583 p
->xmit_cmds
[i
] = (struct transmit_cmd_struct
*)ptr
; /*transmit cmd/buff 0*/
584 ptr
= (char *) ptr
+ sizeof(struct transmit_cmd_struct
);
585 p
->xmit_cbuffs
[i
] = (char *)ptr
; /* char-buffs */
586 ptr
= (char *) ptr
+ XMIT_BUFF_SIZE
;
587 p
->xmit_buffs
[i
] = (struct tbd_struct
*)ptr
; /* TBD */
588 ptr
= (char *) ptr
+ sizeof(struct tbd_struct
);
589 if((void *)ptr
> (void *)dev
->mem_end
)
591 printk("%s: not enough shared-mem for your configuration!\n",dev
->name
);
594 memset((char *)(p
->xmit_cmds
[i
]) ,0, sizeof(struct transmit_cmd_struct
));
595 memset((char *)(p
->xmit_buffs
[i
]),0, sizeof(struct tbd_struct
));
596 p
->xmit_cmds
[i
]->cmd_link
= make16(p
->nop_cmds
[(i
+1)%NUM_XMIT_BUFFS
]);
597 p
->xmit_cmds
[i
]->cmd_status
= swab16(STAT_COMPL
);
598 p
->xmit_cmds
[i
]->cmd_cmd
= swab16(CMD_XMIT
| CMD_INT
);
599 p
->xmit_cmds
[i
]->tbd_offset
= make16((p
->xmit_buffs
[i
]));
600 p
->xmit_buffs
[i
]->next
= 0xffff;
601 p
->xmit_buffs
[i
]->buffer
= make24((p
->xmit_cbuffs
[i
]));
606 #ifndef NO_NOPCOMMANDS
611 * 'start transmitter'
613 #ifndef NO_NOPCOMMANDS
614 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[0]);
615 p
->scb
->cmd_cuc
= CUC_START
;
619 p
->xmit_cmds
[0]->cmd_link
= make16(p
->xmit_cmds
[0]);
620 p
->xmit_cmds
[0]->cmd_cmd
= swab16(CMD_XMIT
| CMD_SUSPEND
| CMD_INT
);
626 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
636 /******************************************************
637 * This is a helper routine for sun3_82586_rnr_int() and init586().
638 * It sets up the Receive Frame Area (RFA).
641 static void *alloc_rfa(struct net_device
*dev
,void *ptr
)
643 volatile struct rfd_struct
*rfd
= (struct rfd_struct
*)ptr
;
644 volatile struct rbd_struct
*rbd
;
646 struct priv
*p
= netdev_priv(dev
);
648 memset((char *) rfd
,0,sizeof(struct rfd_struct
)*(p
->num_recv_buffs
+rfdadd
));
651 for(i
= 0; i
< (p
->num_recv_buffs
+rfdadd
); i
++) {
652 rfd
[i
].next
= make16(rfd
+ (i
+1) % (p
->num_recv_buffs
+rfdadd
) );
653 rfd
[i
].rbd_offset
= 0xffff;
655 rfd
[p
->num_recv_buffs
-1+rfdadd
].last
= RFD_SUSP
; /* RU suspend */
657 ptr
= (void *) (rfd
+ (p
->num_recv_buffs
+ rfdadd
) );
659 rbd
= (struct rbd_struct
*) ptr
;
660 ptr
= (void *) (rbd
+ p
->num_recv_buffs
);
662 /* clr descriptors */
663 memset((char *) rbd
,0,sizeof(struct rbd_struct
)*(p
->num_recv_buffs
));
665 for(i
=0;i
<p
->num_recv_buffs
;i
++)
667 rbd
[i
].next
= make16((rbd
+ (i
+1) % p
->num_recv_buffs
));
668 rbd
[i
].size
= swab16(RECV_BUFF_SIZE
);
669 rbd
[i
].buffer
= make24(ptr
);
670 ptr
= (char *) ptr
+ RECV_BUFF_SIZE
;
673 p
->rfd_top
= p
->rfd_first
;
674 p
->rfd_last
= p
->rfd_first
+ (p
->num_recv_buffs
- 1 + rfdadd
);
676 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
677 p
->rfd_first
->rbd_offset
= make16(rbd
);
683 /**************************************************
684 * Interrupt Handler ...
687 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
)
689 struct net_device
*dev
= dev_id
;
695 printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq
);
698 p
= netdev_priv(dev
);
703 WAIT_4_SCB_CMD(); /* wait for last command */
705 while((stat
=p
->scb
->cus
& STAT_MASK
))
707 p
->scb
->cmd_cuc
= stat
;
710 if(stat
& STAT_FR
) /* received a frame */
711 sun3_82586_rcv_int(dev
);
713 if(stat
& STAT_RNR
) /* RU went 'not ready' */
716 if(p
->scb
->rus
& RU_SUSPEND
) /* special case: RU_SUSPEND */
719 p
->scb
->cmd_ruc
= RUC_RESUME
;
721 WAIT_4_SCB_CMD_RUC();
725 printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->rus
);
726 sun3_82586_rnr_int(dev
);
730 if(stat
& STAT_CX
) /* command with I-bit set complete */
731 sun3_82586_xmt_int(dev
);
733 #ifndef NO_NOPCOMMANDS
734 if(stat
& STAT_CNA
) /* CU went 'not ready' */
736 if(netif_running(dev
))
737 printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->cus
);
744 WAIT_4_SCB_CMD(); /* wait for ack. (sun3_82586_xmt_int can be faster than ack!!) */
745 if(p
->scb
->cmd_cuc
) /* timed out? */
747 printk("%s: Acknowledge timed out.\n",dev
->name
);
758 /*******************************************************
762 static void sun3_82586_rcv_int(struct net_device
*dev
)
765 unsigned short totlen
;
767 struct rbd_struct
*rbd
;
768 struct priv
*p
= netdev_priv(dev
);
773 for(;(status
= p
->rfd_top
->stat_high
) & RFD_COMPL
;)
775 rbd
= (struct rbd_struct
*) make32(p
->rfd_top
->rbd_offset
);
777 if(status
& RFD_OK
) /* frame received without error? */
779 if( (totlen
= swab16(rbd
->status
)) & RBD_LAST
) /* the first and the last buffer? */
781 totlen
&= RBD_MASK
; /* length of this frame */
783 skb
= (struct sk_buff
*) dev_alloc_skb(totlen
+2);
788 skb_copy_to_linear_data(skb
,(char *) p
->base
+swab32((unsigned long) rbd
->buffer
),totlen
);
789 skb
->protocol
=eth_type_trans(skb
,dev
);
791 p
->stats
.rx_packets
++;
794 p
->stats
.rx_dropped
++;
799 /* free all RBD's until RBD_LAST is set */
801 while(!((rstat
=swab16(rbd
->status
)) & RBD_LAST
))
803 totlen
+= rstat
& RBD_MASK
;
806 printk("%s: Whoops .. no end mark in RBD list\n",dev
->name
);
810 rbd
= (struct rbd_struct
*) make32(rbd
->next
);
812 totlen
+= rstat
& RBD_MASK
;
814 printk("%s: received oversized frame! length: %d\n",dev
->name
,totlen
);
815 p
->stats
.rx_dropped
++;
818 else /* frame !(ok), only with 'save-bad-frames' */
820 printk("%s: oops! rfd-error-status: %04x\n",dev
->name
,status
);
821 p
->stats
.rx_errors
++;
823 p
->rfd_top
->stat_high
= 0;
824 p
->rfd_top
->last
= RFD_SUSP
; /* maybe exchange by RFD_LAST */
825 p
->rfd_top
->rbd_offset
= 0xffff;
826 p
->rfd_last
->last
= 0; /* delete RFD_SUSP */
827 p
->rfd_last
= p
->rfd_top
;
828 p
->rfd_top
= (struct rfd_struct
*) make32(p
->rfd_top
->next
); /* step to next RFD */
829 p
->scb
->rfa_offset
= make16(p
->rfd_top
);
838 p
->scb
->cmd_ruc
= RUC_RESUME
;
840 WAIT_4_SCB_CMD_RUC();
848 if(p
->rfd_top
->status
)
852 printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev
->name
);
861 volatile struct rfd_struct
*rfds
=p
->rfd_top
;
862 volatile struct rbd_struct
*rbds
;
863 printk("%s: received a FC intr. without having a frame: %04x %d\n",dev
->name
,status
,old_at_least
);
864 for(i
=0;i
< (p
->num_recv_buffs
+4);i
++)
866 rbds
= (struct rbd_struct
*) make32(rfds
->rbd_offset
);
867 printk("%04x:%04x ",rfds
->status
,rbds
->status
);
868 rfds
= (struct rfd_struct
*) make32(rfds
->next
);
870 printk("\nerrs: %04x %04x stat: %04x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->status
);
871 printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->rus
,(int)p
->scb
->cus
);
873 old_at_least
= at_least_one
;
880 /**********************************************************
881 * handle 'Receiver went not ready'.
884 static void sun3_82586_rnr_int(struct net_device
*dev
)
886 struct priv
*p
= netdev_priv(dev
);
888 p
->stats
.rx_errors
++;
890 WAIT_4_SCB_CMD(); /* wait for the last cmd, WAIT_4_FULLSTAT?? */
891 p
->scb
->cmd_ruc
= RUC_ABORT
; /* usually the RU is in the 'no resource'-state .. abort it now. */
893 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. */
895 alloc_rfa(dev
,(char *)p
->rfd_first
);
896 /* maybe add a check here, before restarting the RU */
897 startrecv586(dev
); /* restart RU */
899 printk("%s: Receive-Unit restarted. Status: %04x\n",dev
->name
,p
->scb
->rus
);
903 /**********************************************************
904 * handle xmit - interrupt
907 static void sun3_82586_xmt_int(struct net_device
*dev
)
910 struct priv
*p
= netdev_priv(dev
);
915 status
= swab16(p
->xmit_cmds
[p
->xmit_last
]->cmd_status
);
916 if(!(status
& STAT_COMPL
))
917 printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev
->name
);
921 p
->stats
.tx_packets
++;
922 p
->stats
.collisions
+= (status
& TCMD_MAXCOLLMASK
);
926 p
->stats
.tx_errors
++;
927 if(status
& TCMD_LATECOLL
) {
928 printk("%s: late collision detected.\n",dev
->name
);
929 p
->stats
.collisions
++;
931 else if(status
& TCMD_NOCARRIER
) {
932 p
->stats
.tx_carrier_errors
++;
933 printk("%s: no carrier detected.\n",dev
->name
);
935 else if(status
& TCMD_LOSTCTS
)
936 printk("%s: loss of CTS detected.\n",dev
->name
);
937 else if(status
& TCMD_UNDERRUN
) {
938 p
->stats
.tx_fifo_errors
++;
939 printk("%s: DMA underrun detected.\n",dev
->name
);
941 else if(status
& TCMD_MAXCOLL
) {
942 printk("%s: Max. collisions exceeded.\n",dev
->name
);
943 p
->stats
.collisions
+= 16;
947 #if (NUM_XMIT_BUFFS > 1)
948 if( (++p
->xmit_last
) == NUM_XMIT_BUFFS
)
951 netif_wake_queue(dev
);
954 /***********************************************************
955 * (re)start the receiver
958 static void startrecv586(struct net_device
*dev
)
960 struct priv
*p
= netdev_priv(dev
);
963 WAIT_4_SCB_CMD_RUC();
964 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
965 p
->scb
->cmd_ruc
= RUC_START
;
966 sun3_attn586(); /* start cmd. */
967 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. (no timeout!!) */
970 static void sun3_82586_timeout(struct net_device
*dev
)
972 struct priv
*p
= netdev_priv(dev
);
973 #ifndef NO_NOPCOMMANDS
974 if(p
->scb
->cus
& CU_ACTIVE
) /* COMMAND-UNIT active? */
976 netif_wake_queue(dev
);
978 printk("%s: strange ... timeout with CU active?!?\n",dev
->name
);
979 printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev
->name
,(int)swab16(p
->xmit_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[1]->cmd_status
),(int)p
->nop_point
);
981 p
->scb
->cmd_cuc
= CUC_ABORT
;
984 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[p
->nop_point
]);
985 p
->scb
->cmd_cuc
= CUC_START
;
988 dev
->trans_start
= jiffies
; /* prevent tx timeout */
994 printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev
->name
,p
->scb
->cus
);
995 printk("%s: command-stats: %04x %04x\n",dev
->name
,swab16(p
->xmit_cmds
[0]->cmd_status
),swab16(p
->xmit_cmds
[1]->cmd_status
));
996 printk("%s: check, whether you set the right interrupt number!\n",dev
->name
);
998 sun3_82586_close(dev
);
999 sun3_82586_open(dev
);
1001 dev
->trans_start
= jiffies
; /* prevent tx timeout */
1004 /******************************************************
1008 static int sun3_82586_send_packet(struct sk_buff
*skb
, struct net_device
*dev
)
1011 #ifndef NO_NOPCOMMANDS
1014 struct priv
*p
= netdev_priv(dev
);
1016 if(skb
->len
> XMIT_BUFF_SIZE
)
1018 printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev
->name
,XMIT_BUFF_SIZE
,skb
->len
);
1019 return NETDEV_TX_OK
;
1022 netif_stop_queue(dev
);
1024 #if(NUM_XMIT_BUFFS > 1)
1025 if(test_and_set_bit(0,(void *) &p
->lock
)) {
1026 printk("%s: Queue was locked\n",dev
->name
);
1027 return NETDEV_TX_BUSY
;
1033 if (len
< ETH_ZLEN
) {
1034 memset((void *)p
->xmit_cbuffs
[p
->xmit_count
], 0,
1038 skb_copy_from_linear_data(skb
, (void *)p
->xmit_cbuffs
[p
->xmit_count
], skb
->len
);
1040 #if (NUM_XMIT_BUFFS == 1)
1041 # ifdef NO_NOPCOMMANDS
1044 if(p
->scb
->cus
& CU_ACTIVE
)
1046 printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev
->name
);
1047 printk("%s: stat: %04x %04x\n",dev
->name
,p
->scb
->cus
,swab16(p
->xmit_cmds
[0]->cmd_status
));
1051 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1054 p
->xmit_cmds
[0]->cmd_status
= 0;
1056 if( (p
->scb
->cus
& CU_STATUS
) == CU_SUSPEND
)
1057 p
->scb
->cmd_cuc
= CUC_RESUME
;
1060 p
->scb
->cbl_offset
= make16(p
->xmit_cmds
[0]);
1061 p
->scb
->cmd_cuc
= CUC_START
;
1068 if( (p
->scb
->cus
& CU_ACTIVE
)) /* test it, because CU sometimes doesn't start immediately */
1070 if(p
->xmit_cmds
[0]->cmd_status
)
1073 printk("%s: Can't start transmit-command.\n",dev
->name
);
1076 next_nop
= (p
->nop_point
+ 1) & 0x1;
1077 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1079 p
->xmit_cmds
[0]->cmd_link
= p
->nop_cmds
[next_nop
]->cmd_link
1080 = make16((p
->nop_cmds
[next_nop
]));
1081 p
->xmit_cmds
[0]->cmd_status
= p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1083 p
->nop_cmds
[p
->nop_point
]->cmd_link
= make16((p
->xmit_cmds
[0]));
1084 p
->nop_point
= next_nop
;
1088 p
->xmit_buffs
[p
->xmit_count
]->size
= swab16(TBD_LAST
| len
);
1089 if( (next_nop
= p
->xmit_count
+ 1) == NUM_XMIT_BUFFS
)
1092 p
->xmit_cmds
[p
->xmit_count
]->cmd_status
= 0;
1093 /* linkpointer of xmit-command already points to next nop cmd */
1094 p
->nop_cmds
[next_nop
]->cmd_link
= make16((p
->nop_cmds
[next_nop
]));
1095 p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1097 p
->nop_cmds
[p
->xmit_count
]->cmd_link
= make16((p
->xmit_cmds
[p
->xmit_count
]));
1098 p
->xmit_count
= next_nop
;
1101 unsigned long flags
;
1102 local_irq_save(flags
);
1103 if(p
->xmit_count
!= p
->xmit_last
)
1104 netif_wake_queue(dev
);
1106 local_irq_restore(flags
);
1111 return NETDEV_TX_OK
;
1114 /*******************************************
1115 * Someone wanna have the statistics
1118 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
)
1120 struct priv
*p
= netdev_priv(dev
);
1121 unsigned short crc
,aln
,rsc
,ovrn
;
1123 crc
= swab16(p
->scb
->crc_errs
); /* get error-statistic from the ni82586 */
1124 p
->scb
->crc_errs
= 0;
1125 aln
= swab16(p
->scb
->aln_errs
);
1126 p
->scb
->aln_errs
= 0;
1127 rsc
= swab16(p
->scb
->rsc_errs
);
1128 p
->scb
->rsc_errs
= 0;
1129 ovrn
= swab16(p
->scb
->ovrn_errs
);
1130 p
->scb
->ovrn_errs
= 0;
1132 p
->stats
.rx_crc_errors
+= crc
;
1133 p
->stats
.rx_fifo_errors
+= ovrn
;
1134 p
->stats
.rx_frame_errors
+= aln
;
1135 p
->stats
.rx_dropped
+= rsc
;
1140 /********************************************************
1144 static void set_multicast_list(struct net_device
*dev
)
1146 netif_stop_queue(dev
);
1152 netif_wake_queue(dev
);
1156 #error This code is not currently supported as a module
1157 static struct net_device
*dev_sun3_82586
;
1159 int init_module(void)
1161 dev_sun3_82586
= sun3_82586_probe(-1);
1162 if (IS_ERR(dev_sun3_82586
))
1163 return PTR_ERR(dev_sun3_82586
);
1167 void cleanup_module(void)
1169 unsigned long ioaddr
= dev_sun3_82586
->base_addr
;
1170 unregister_netdev(dev_sun3_82586
);
1171 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
1172 iounmap((void *)ioaddr
);
1173 free_netdev(dev_sun3_82586
);
1179 * DUMP .. we expect a not running CMD unit and enough space
1181 void sun3_82586_dump(struct net_device
*dev
,void *ptr
)
1183 struct priv
*p
= netdev_priv(dev
);
1184 struct dump_cmd_struct
*dump_cmd
= (struct dump_cmd_struct
*) ptr
;
1187 p
->scb
->cmd_cuc
= CUC_ABORT
;
1190 WAIT_4_SCB_CMD_RUC();
1192 dump_cmd
->cmd_status
= 0;
1193 dump_cmd
->cmd_cmd
= CMD_DUMP
| CMD_LAST
;
1194 dump_cmd
->dump_offset
= make16((dump_cmd
+ 1));
1195 dump_cmd
->cmd_link
= 0xffff;
1197 p
->scb
->cbl_offset
= make16(dump_cmd
);
1198 p
->scb
->cmd_cuc
= CUC_START
;
1200 WAIT_4_STAT_COMPL(dump_cmd
);
1202 if( (dump_cmd
->cmd_status
& (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
1203 printk("%s: Can't get dump information.\n",dev
->name
);
1205 for(i
=0;i
<170;i
++) {
1206 printk("%02x ",(int) ((unsigned char *) (dump_cmd
+ 1))[i
]);
1214 MODULE_LICENSE("GPL");