target: Set response format in INQUIRY response
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / kernel / ecard.c
blob4dd0edab6a658880ed505145fff2c5ce001ae639
1 /*
2 * linux/arch/arm/kernel/ecard.c
4 * Copyright 1995-2001 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Find all installed expansion cards, and handle interrupts from them.
12 * Created from information from Acorns RiscOS3 PRMs
14 * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether
15 * podule slot.
16 * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work.
17 * 12-Sep-1997 RMK Created new handling of interrupt enables/disables
18 * - cards can now register their own routine to control
19 * interrupts (recommended).
20 * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled
21 * on reset from Linux. (Caused cards not to respond
22 * under RiscOS without hard reset).
23 * 15-Feb-1998 RMK Added DMA support
24 * 12-Sep-1998 RMK Added EASI support
25 * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment.
26 * 17-Apr-1999 RMK Support for EASI Type C cycles.
28 #define ECARD_C
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/types.h>
33 #include <linux/sched.h>
34 #include <linux/interrupt.h>
35 #include <linux/completion.h>
36 #include <linux/reboot.h>
37 #include <linux/mm.h>
38 #include <linux/slab.h>
39 #include <linux/proc_fs.h>
40 #include <linux/seq_file.h>
41 #include <linux/device.h>
42 #include <linux/init.h>
43 #include <linux/mutex.h>
44 #include <linux/kthread.h>
45 #include <linux/io.h>
47 #include <asm/dma.h>
48 #include <asm/ecard.h>
49 #include <mach/hardware.h>
50 #include <asm/irq.h>
51 #include <asm/mmu_context.h>
52 #include <asm/mach/irq.h>
53 #include <asm/tlbflush.h>
55 #include "ecard.h"
57 #ifndef CONFIG_ARCH_RPC
58 #define HAVE_EXPMASK
59 #endif
61 struct ecard_request {
62 void (*fn)(struct ecard_request *);
63 ecard_t *ec;
64 unsigned int address;
65 unsigned int length;
66 unsigned int use_loader;
67 void *buffer;
68 struct completion *complete;
71 struct expcard_blacklist {
72 unsigned short manufacturer;
73 unsigned short product;
74 const char *type;
77 static ecard_t *cards;
78 static ecard_t *slot_to_expcard[MAX_ECARDS];
79 static unsigned int ectcr;
80 #ifdef HAS_EXPMASK
81 static unsigned int have_expmask;
82 #endif
84 /* List of descriptions of cards which don't have an extended
85 * identification, or chunk directories containing a description.
87 static struct expcard_blacklist __initdata blacklist[] = {
88 { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
91 asmlinkage extern int
92 ecard_loader_reset(unsigned long base, loader_t loader);
93 asmlinkage extern int
94 ecard_loader_read(int off, unsigned long base, loader_t loader);
96 static inline unsigned short ecard_getu16(unsigned char *v)
98 return v[0] | v[1] << 8;
101 static inline signed long ecard_gets24(unsigned char *v)
103 return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
106 static inline ecard_t *slot_to_ecard(unsigned int slot)
108 return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
111 /* ===================== Expansion card daemon ======================== */
113 * Since the loader programs on the expansion cards need to be run
114 * in a specific environment, create a separate task with this
115 * environment up, and pass requests to this task as and when we
116 * need to.
118 * This should allow 99% of loaders to be called from Linux.
120 * From a security standpoint, we trust the card vendors. This
121 * may be a misplaced trust.
123 static void ecard_task_reset(struct ecard_request *req)
125 struct expansion_card *ec = req->ec;
126 struct resource *res;
128 res = ec->slot_no == 8
129 ? &ec->resource[ECARD_RES_MEMC]
130 : ec->easi
131 ? &ec->resource[ECARD_RES_EASI]
132 : &ec->resource[ECARD_RES_IOCSYNC];
134 ecard_loader_reset(res->start, ec->loader);
137 static void ecard_task_readbytes(struct ecard_request *req)
139 struct expansion_card *ec = req->ec;
140 unsigned char *buf = req->buffer;
141 unsigned int len = req->length;
142 unsigned int off = req->address;
144 if (ec->slot_no == 8) {
145 void __iomem *base = (void __iomem *)
146 ec->resource[ECARD_RES_MEMC].start;
149 * The card maintains an index which increments the address
150 * into a 4096-byte page on each access. We need to keep
151 * track of the counter.
153 static unsigned int index;
154 unsigned int page;
156 page = (off >> 12) * 4;
157 if (page > 256 * 4)
158 return;
160 off &= 4095;
163 * If we are reading offset 0, or our current index is
164 * greater than the offset, reset the hardware index counter.
166 if (off == 0 || index > off) {
167 writeb(0, base);
168 index = 0;
172 * Increment the hardware index counter until we get to the
173 * required offset. The read bytes are discarded.
175 while (index < off) {
176 readb(base + page);
177 index += 1;
180 while (len--) {
181 *buf++ = readb(base + page);
182 index += 1;
184 } else {
185 unsigned long base = (ec->easi
186 ? &ec->resource[ECARD_RES_EASI]
187 : &ec->resource[ECARD_RES_IOCSYNC])->start;
188 void __iomem *pbase = (void __iomem *)base;
190 if (!req->use_loader || !ec->loader) {
191 off *= 4;
192 while (len--) {
193 *buf++ = readb(pbase + off);
194 off += 4;
196 } else {
197 while(len--) {
199 * The following is required by some
200 * expansion card loader programs.
202 *(unsigned long *)0x108 = 0;
203 *buf++ = ecard_loader_read(off++, base,
204 ec->loader);
211 static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
212 static struct ecard_request *ecard_req;
213 static DEFINE_MUTEX(ecard_mutex);
216 * Set up the expansion card daemon's page tables.
218 static void ecard_init_pgtables(struct mm_struct *mm)
220 struct vm_area_struct vma;
222 /* We want to set up the page tables for the following mapping:
223 * Virtual Physical
224 * 0x03000000 0x03000000
225 * 0x03010000 unmapped
226 * 0x03210000 0x03210000
227 * 0x03400000 unmapped
228 * 0x08000000 0x08000000
229 * 0x10000000 unmapped
231 * FIXME: we don't follow this 100% yet.
233 pgd_t *src_pgd, *dst_pgd;
235 src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
236 dst_pgd = pgd_offset(mm, IO_START);
238 memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
240 src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
241 dst_pgd = pgd_offset(mm, EASI_START);
243 memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
245 vma.vm_mm = mm;
247 flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
248 flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
251 static int ecard_init_mm(void)
253 struct mm_struct * mm = mm_alloc();
254 struct mm_struct *active_mm = current->active_mm;
256 if (!mm)
257 return -ENOMEM;
259 current->mm = mm;
260 current->active_mm = mm;
261 activate_mm(active_mm, mm);
262 mmdrop(active_mm);
263 ecard_init_pgtables(mm);
264 return 0;
267 static int
268 ecard_task(void * unused)
271 * Allocate a mm. We're not a lazy-TLB kernel task since we need
272 * to set page table entries where the user space would be. Note
273 * that this also creates the page tables. Failure is not an
274 * option here.
276 if (ecard_init_mm())
277 panic("kecardd: unable to alloc mm\n");
279 while (1) {
280 struct ecard_request *req;
282 wait_event_interruptible(ecard_wait, ecard_req != NULL);
284 req = xchg(&ecard_req, NULL);
285 if (req != NULL) {
286 req->fn(req);
287 complete(req->complete);
293 * Wake the expansion card daemon to action our request.
295 * FIXME: The test here is not sufficient to detect if the
296 * kcardd is running.
298 static void ecard_call(struct ecard_request *req)
300 DECLARE_COMPLETION_ONSTACK(completion);
302 req->complete = &completion;
304 mutex_lock(&ecard_mutex);
305 ecard_req = req;
306 wake_up(&ecard_wait);
309 * Now wait for kecardd to run.
311 wait_for_completion(&completion);
312 mutex_unlock(&ecard_mutex);
315 /* ======================= Mid-level card control ===================== */
317 static void
318 ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
320 struct ecard_request req;
322 req.fn = ecard_task_readbytes;
323 req.ec = ec;
324 req.address = off;
325 req.length = len;
326 req.use_loader = useld;
327 req.buffer = addr;
329 ecard_call(&req);
332 int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
334 struct ex_chunk_dir excd;
335 int index = 16;
336 int useld = 0;
338 if (!ec->cid.cd)
339 return 0;
341 while(1) {
342 ecard_readbytes(&excd, ec, index, 8, useld);
343 index += 8;
344 if (c_id(&excd) == 0) {
345 if (!useld && ec->loader) {
346 useld = 1;
347 index = 0;
348 continue;
350 return 0;
352 if (c_id(&excd) == 0xf0) { /* link */
353 index = c_start(&excd);
354 continue;
356 if (c_id(&excd) == 0x80) { /* loader */
357 if (!ec->loader) {
358 ec->loader = kmalloc(c_len(&excd),
359 GFP_KERNEL);
360 if (ec->loader)
361 ecard_readbytes(ec->loader, ec,
362 (int)c_start(&excd),
363 c_len(&excd), useld);
364 else
365 return 0;
367 continue;
369 if (c_id(&excd) == id && num-- == 0)
370 break;
373 if (c_id(&excd) & 0x80) {
374 switch (c_id(&excd) & 0x70) {
375 case 0x70:
376 ecard_readbytes((unsigned char *)excd.d.string, ec,
377 (int)c_start(&excd), c_len(&excd),
378 useld);
379 break;
380 case 0x00:
381 break;
384 cd->start_offset = c_start(&excd);
385 memcpy(cd->d.string, excd.d.string, 256);
386 return 1;
389 /* ======================= Interrupt control ============================ */
391 static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
393 #ifdef HAS_EXPMASK
394 if (irqnr < 4 && have_expmask) {
395 have_expmask |= 1 << irqnr;
396 __raw_writeb(have_expmask, EXPMASK_ENABLE);
398 #endif
401 static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
403 #ifdef HAS_EXPMASK
404 if (irqnr < 4 && have_expmask) {
405 have_expmask &= ~(1 << irqnr);
406 __raw_writeb(have_expmask, EXPMASK_ENABLE);
408 #endif
411 static int ecard_def_irq_pending(ecard_t *ec)
413 return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
416 static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
418 panic("ecard_def_fiq_enable called - impossible");
421 static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
423 panic("ecard_def_fiq_disable called - impossible");
426 static int ecard_def_fiq_pending(ecard_t *ec)
428 return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
431 static expansioncard_ops_t ecard_default_ops = {
432 ecard_def_irq_enable,
433 ecard_def_irq_disable,
434 ecard_def_irq_pending,
435 ecard_def_fiq_enable,
436 ecard_def_fiq_disable,
437 ecard_def_fiq_pending
441 * Enable and disable interrupts from expansion cards.
442 * (interrupts are disabled for these functions).
444 * They are not meant to be called directly, but via enable/disable_irq.
446 static void ecard_irq_unmask(struct irq_data *d)
448 ecard_t *ec = slot_to_ecard(d->irq - 32);
450 if (ec) {
451 if (!ec->ops)
452 ec->ops = &ecard_default_ops;
454 if (ec->claimed && ec->ops->irqenable)
455 ec->ops->irqenable(ec, d->irq);
456 else
457 printk(KERN_ERR "ecard: rejecting request to "
458 "enable IRQs for %d\n", d->irq);
462 static void ecard_irq_mask(struct irq_data *d)
464 ecard_t *ec = slot_to_ecard(d->irq - 32);
466 if (ec) {
467 if (!ec->ops)
468 ec->ops = &ecard_default_ops;
470 if (ec->ops && ec->ops->irqdisable)
471 ec->ops->irqdisable(ec, d->irq);
475 static struct irq_chip ecard_chip = {
476 .name = "ECARD",
477 .irq_ack = ecard_irq_mask,
478 .irq_mask = ecard_irq_mask,
479 .irq_unmask = ecard_irq_unmask,
482 void ecard_enablefiq(unsigned int fiqnr)
484 ecard_t *ec = slot_to_ecard(fiqnr);
486 if (ec) {
487 if (!ec->ops)
488 ec->ops = &ecard_default_ops;
490 if (ec->claimed && ec->ops->fiqenable)
491 ec->ops->fiqenable(ec, fiqnr);
492 else
493 printk(KERN_ERR "ecard: rejecting request to "
494 "enable FIQs for %d\n", fiqnr);
498 void ecard_disablefiq(unsigned int fiqnr)
500 ecard_t *ec = slot_to_ecard(fiqnr);
502 if (ec) {
503 if (!ec->ops)
504 ec->ops = &ecard_default_ops;
506 if (ec->ops->fiqdisable)
507 ec->ops->fiqdisable(ec, fiqnr);
511 static void ecard_dump_irq_state(void)
513 ecard_t *ec;
515 printk("Expansion card IRQ state:\n");
517 for (ec = cards; ec; ec = ec->next) {
518 if (ec->slot_no == 8)
519 continue;
521 printk(" %d: %sclaimed, ",
522 ec->slot_no, ec->claimed ? "" : "not ");
524 if (ec->ops && ec->ops->irqpending &&
525 ec->ops != &ecard_default_ops)
526 printk("irq %spending\n",
527 ec->ops->irqpending(ec) ? "" : "not ");
528 else
529 printk("irqaddr %p, mask = %02X, status = %02X\n",
530 ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
534 static void ecard_check_lockup(struct irq_desc *desc)
536 static unsigned long last;
537 static int lockup;
540 * If the timer interrupt has not run since the last million
541 * unrecognised expansion card interrupts, then there is
542 * something seriously wrong. Disable the expansion card
543 * interrupts so at least we can continue.
545 * Maybe we ought to start a timer to re-enable them some time
546 * later?
548 if (last == jiffies) {
549 lockup += 1;
550 if (lockup > 1000000) {
551 printk(KERN_ERR "\nInterrupt lockup detected - "
552 "disabling all expansion card interrupts\n");
554 desc->irq_data.chip->irq_mask(&desc->irq_data);
555 ecard_dump_irq_state();
557 } else
558 lockup = 0;
561 * If we did not recognise the source of this interrupt,
562 * warn the user, but don't flood the user with these messages.
564 if (!last || time_after(jiffies, last + 5*HZ)) {
565 last = jiffies;
566 printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
567 ecard_dump_irq_state();
571 static void
572 ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
574 ecard_t *ec;
575 int called = 0;
577 desc->irq_data.chip->irq_mask(&desc->irq_data);
578 for (ec = cards; ec; ec = ec->next) {
579 int pending;
581 if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
582 continue;
584 if (ec->ops && ec->ops->irqpending)
585 pending = ec->ops->irqpending(ec);
586 else
587 pending = ecard_default_ops.irqpending(ec);
589 if (pending) {
590 generic_handle_irq(ec->irq);
591 called ++;
594 desc->irq_data.chip->irq_unmask(&desc->irq_data);
596 if (called == 0)
597 ecard_check_lockup(desc);
600 #ifdef HAS_EXPMASK
601 static unsigned char priority_masks[] =
603 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
606 static unsigned char first_set[] =
608 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
609 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
612 static void
613 ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
615 const unsigned int statusmask = 15;
616 unsigned int status;
618 status = __raw_readb(EXPMASK_STATUS) & statusmask;
619 if (status) {
620 unsigned int slot = first_set[status];
621 ecard_t *ec = slot_to_ecard(slot);
623 if (ec->claimed) {
625 * this ugly code is so that we can operate a
626 * prioritorising system:
628 * Card 0 highest priority
629 * Card 1
630 * Card 2
631 * Card 3 lowest priority
633 * Serial cards should go in 0/1, ethernet/scsi in 2/3
634 * otherwise you will lose serial data at high speeds!
636 generic_handle_irq(ec->irq);
637 } else {
638 printk(KERN_WARNING "card%d: interrupt from unclaimed "
639 "card???\n", slot);
640 have_expmask &= ~(1 << slot);
641 __raw_writeb(have_expmask, EXPMASK_ENABLE);
643 } else
644 printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
647 static int __init ecard_probeirqhw(void)
649 ecard_t *ec;
650 int found;
652 __raw_writeb(0x00, EXPMASK_ENABLE);
653 __raw_writeb(0xff, EXPMASK_STATUS);
654 found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
655 __raw_writeb(0xff, EXPMASK_ENABLE);
657 if (found) {
658 printk(KERN_DEBUG "Expansion card interrupt "
659 "management hardware found\n");
661 /* for each card present, set a bit to '1' */
662 have_expmask = 0x80000000;
664 for (ec = cards; ec; ec = ec->next)
665 have_expmask |= 1 << ec->slot_no;
667 __raw_writeb(have_expmask, EXPMASK_ENABLE);
670 return found;
672 #else
673 #define ecard_irqexp_handler NULL
674 #define ecard_probeirqhw() (0)
675 #endif
677 static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
679 void __iomem *address = NULL;
680 int slot = ec->slot_no;
682 if (ec->slot_no == 8)
683 return ECARD_MEMC8_BASE;
685 ectcr &= ~(1 << slot);
687 switch (type) {
688 case ECARD_MEMC:
689 if (slot < 4)
690 address = ECARD_MEMC_BASE + (slot << 14);
691 break;
693 case ECARD_IOC:
694 if (slot < 4)
695 address = ECARD_IOC_BASE + (slot << 14);
696 else
697 address = ECARD_IOC4_BASE + ((slot - 4) << 14);
698 if (address)
699 address += speed << 19;
700 break;
702 case ECARD_EASI:
703 address = ECARD_EASI_BASE + (slot << 24);
704 if (speed == ECARD_FAST)
705 ectcr |= 1 << slot;
706 break;
708 default:
709 break;
712 #ifdef IOMD_ECTCR
713 iomd_writeb(ectcr, IOMD_ECTCR);
714 #endif
715 return address;
718 static int ecard_prints(struct seq_file *m, ecard_t *ec)
720 seq_printf(m, " %d: %s ", ec->slot_no, ec->easi ? "EASI" : " ");
722 if (ec->cid.id == 0) {
723 struct in_chunk_dir incd;
725 seq_printf(m, "[%04X:%04X] ",
726 ec->cid.manufacturer, ec->cid.product);
728 if (!ec->card_desc && ec->cid.cd &&
729 ecard_readchunk(&incd, ec, 0xf5, 0)) {
730 ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
732 if (ec->card_desc)
733 strcpy((char *)ec->card_desc, incd.d.string);
736 seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
737 } else
738 seq_printf(m, "Simple card %d\n", ec->cid.id);
740 return 0;
743 static int ecard_devices_proc_show(struct seq_file *m, void *v)
745 ecard_t *ec = cards;
747 while (ec) {
748 ecard_prints(m, ec);
749 ec = ec->next;
751 return 0;
754 static int ecard_devices_proc_open(struct inode *inode, struct file *file)
756 return single_open(file, ecard_devices_proc_show, NULL);
759 static const struct file_operations bus_ecard_proc_fops = {
760 .owner = THIS_MODULE,
761 .open = ecard_devices_proc_open,
762 .read = seq_read,
763 .llseek = seq_lseek,
764 .release = single_release,
767 static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
769 static void ecard_proc_init(void)
771 proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
772 proc_create("devices", 0, proc_bus_ecard_dir, &bus_ecard_proc_fops);
775 #define ec_set_resource(ec,nr,st,sz) \
776 do { \
777 (ec)->resource[nr].name = dev_name(&ec->dev); \
778 (ec)->resource[nr].start = st; \
779 (ec)->resource[nr].end = (st) + (sz) - 1; \
780 (ec)->resource[nr].flags = IORESOURCE_MEM; \
781 } while (0)
783 static void __init ecard_free_card(struct expansion_card *ec)
785 int i;
787 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
788 if (ec->resource[i].flags)
789 release_resource(&ec->resource[i]);
791 kfree(ec);
794 static struct expansion_card *__init ecard_alloc_card(int type, int slot)
796 struct expansion_card *ec;
797 unsigned long base;
798 int i;
800 ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
801 if (!ec) {
802 ec = ERR_PTR(-ENOMEM);
803 goto nomem;
806 ec->slot_no = slot;
807 ec->easi = type == ECARD_EASI;
808 ec->irq = NO_IRQ;
809 ec->fiq = NO_IRQ;
810 ec->dma = NO_DMA;
811 ec->ops = &ecard_default_ops;
813 dev_set_name(&ec->dev, "ecard%d", slot);
814 ec->dev.parent = NULL;
815 ec->dev.bus = &ecard_bus_type;
816 ec->dev.dma_mask = &ec->dma_mask;
817 ec->dma_mask = (u64)0xffffffff;
818 ec->dev.coherent_dma_mask = ec->dma_mask;
820 if (slot < 4) {
821 ec_set_resource(ec, ECARD_RES_MEMC,
822 PODSLOT_MEMC_BASE + (slot << 14),
823 PODSLOT_MEMC_SIZE);
824 base = PODSLOT_IOC0_BASE + (slot << 14);
825 } else
826 base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
828 #ifdef CONFIG_ARCH_RPC
829 if (slot < 8) {
830 ec_set_resource(ec, ECARD_RES_EASI,
831 PODSLOT_EASI_BASE + (slot << 24),
832 PODSLOT_EASI_SIZE);
835 if (slot == 8) {
836 ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
837 } else
838 #endif
840 for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
841 ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
842 base + (i << 19), PODSLOT_IOC_SIZE);
844 for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
845 if (ec->resource[i].flags &&
846 request_resource(&iomem_resource, &ec->resource[i])) {
847 dev_err(&ec->dev, "resource(s) not available\n");
848 ec->resource[i].end -= ec->resource[i].start;
849 ec->resource[i].start = 0;
850 ec->resource[i].flags = 0;
854 nomem:
855 return ec;
858 static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
860 struct expansion_card *ec = ECARD_DEV(dev);
861 return sprintf(buf, "%u\n", ec->irq);
864 static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
866 struct expansion_card *ec = ECARD_DEV(dev);
867 return sprintf(buf, "%u\n", ec->dma);
870 static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
872 struct expansion_card *ec = ECARD_DEV(dev);
873 char *str = buf;
874 int i;
876 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
877 str += sprintf(str, "%08x %08x %08lx\n",
878 ec->resource[i].start,
879 ec->resource[i].end,
880 ec->resource[i].flags);
882 return str - buf;
885 static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
887 struct expansion_card *ec = ECARD_DEV(dev);
888 return sprintf(buf, "%u\n", ec->cid.manufacturer);
891 static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
893 struct expansion_card *ec = ECARD_DEV(dev);
894 return sprintf(buf, "%u\n", ec->cid.product);
897 static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
899 struct expansion_card *ec = ECARD_DEV(dev);
900 return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
903 static struct device_attribute ecard_dev_attrs[] = {
904 __ATTR(device, S_IRUGO, ecard_show_device, NULL),
905 __ATTR(dma, S_IRUGO, ecard_show_dma, NULL),
906 __ATTR(irq, S_IRUGO, ecard_show_irq, NULL),
907 __ATTR(resource, S_IRUGO, ecard_show_resources, NULL),
908 __ATTR(type, S_IRUGO, ecard_show_type, NULL),
909 __ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL),
910 __ATTR_NULL,
914 int ecard_request_resources(struct expansion_card *ec)
916 int i, err = 0;
918 for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
919 if (ecard_resource_end(ec, i) &&
920 !request_mem_region(ecard_resource_start(ec, i),
921 ecard_resource_len(ec, i),
922 ec->dev.driver->name)) {
923 err = -EBUSY;
924 break;
928 if (err) {
929 while (i--)
930 if (ecard_resource_end(ec, i))
931 release_mem_region(ecard_resource_start(ec, i),
932 ecard_resource_len(ec, i));
934 return err;
936 EXPORT_SYMBOL(ecard_request_resources);
938 void ecard_release_resources(struct expansion_card *ec)
940 int i;
942 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
943 if (ecard_resource_end(ec, i))
944 release_mem_region(ecard_resource_start(ec, i),
945 ecard_resource_len(ec, i));
947 EXPORT_SYMBOL(ecard_release_resources);
949 void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
951 ec->irq_data = irq_data;
952 barrier();
953 ec->ops = ops;
955 EXPORT_SYMBOL(ecard_setirq);
957 void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
958 unsigned long offset, unsigned long maxsize)
960 unsigned long start = ecard_resource_start(ec, res);
961 unsigned long end = ecard_resource_end(ec, res);
963 if (offset > (end - start))
964 return NULL;
966 start += offset;
967 if (maxsize && end - start > maxsize)
968 end = start + maxsize;
970 return devm_ioremap(&ec->dev, start, end - start);
972 EXPORT_SYMBOL(ecardm_iomap);
975 * Probe for an expansion card.
977 * If bit 1 of the first byte of the card is set, then the
978 * card does not exist.
980 static int __init
981 ecard_probe(int slot, card_type_t type)
983 ecard_t **ecp;
984 ecard_t *ec;
985 struct ex_ecid cid;
986 void __iomem *addr;
987 int i, rc;
989 ec = ecard_alloc_card(type, slot);
990 if (IS_ERR(ec)) {
991 rc = PTR_ERR(ec);
992 goto nomem;
995 rc = -ENODEV;
996 if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
997 goto nodev;
999 cid.r_zero = 1;
1000 ecard_readbytes(&cid, ec, 0, 16, 0);
1001 if (cid.r_zero)
1002 goto nodev;
1004 ec->cid.id = cid.r_id;
1005 ec->cid.cd = cid.r_cd;
1006 ec->cid.is = cid.r_is;
1007 ec->cid.w = cid.r_w;
1008 ec->cid.manufacturer = ecard_getu16(cid.r_manu);
1009 ec->cid.product = ecard_getu16(cid.r_prod);
1010 ec->cid.country = cid.r_country;
1011 ec->cid.irqmask = cid.r_irqmask;
1012 ec->cid.irqoff = ecard_gets24(cid.r_irqoff);
1013 ec->cid.fiqmask = cid.r_fiqmask;
1014 ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
1015 ec->fiqaddr =
1016 ec->irqaddr = addr;
1018 if (ec->cid.is) {
1019 ec->irqmask = ec->cid.irqmask;
1020 ec->irqaddr += ec->cid.irqoff;
1021 ec->fiqmask = ec->cid.fiqmask;
1022 ec->fiqaddr += ec->cid.fiqoff;
1023 } else {
1024 ec->irqmask = 1;
1025 ec->fiqmask = 4;
1028 for (i = 0; i < ARRAY_SIZE(blacklist); i++)
1029 if (blacklist[i].manufacturer == ec->cid.manufacturer &&
1030 blacklist[i].product == ec->cid.product) {
1031 ec->card_desc = blacklist[i].type;
1032 break;
1036 * hook the interrupt handlers
1038 if (slot < 8) {
1039 ec->irq = 32 + slot;
1040 irq_set_chip_and_handler(ec->irq, &ecard_chip,
1041 handle_level_irq);
1042 set_irq_flags(ec->irq, IRQF_VALID);
1045 if (slot == 8)
1046 ec->irq = 11;
1047 #ifdef CONFIG_ARCH_RPC
1048 /* On RiscPC, only first two slots have DMA capability */
1049 if (slot < 2)
1050 ec->dma = 2 + slot;
1051 #endif
1053 for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
1055 *ecp = ec;
1056 slot_to_expcard[slot] = ec;
1058 device_register(&ec->dev);
1060 return 0;
1062 nodev:
1063 ecard_free_card(ec);
1064 nomem:
1065 return rc;
1069 * Initialise the expansion card system.
1070 * Locate all hardware - interrupt management and
1071 * actual cards.
1073 static int __init ecard_init(void)
1075 struct task_struct *task;
1076 int slot, irqhw;
1078 task = kthread_run(ecard_task, NULL, "kecardd");
1079 if (IS_ERR(task)) {
1080 printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
1081 PTR_ERR(task));
1082 return PTR_ERR(task);
1085 printk("Probing expansion cards\n");
1087 for (slot = 0; slot < 8; slot ++) {
1088 if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
1089 ecard_probe(slot, ECARD_IOC);
1092 ecard_probe(8, ECARD_IOC);
1094 irqhw = ecard_probeirqhw();
1096 irq_set_chained_handler(IRQ_EXPANSIONCARD,
1097 irqhw ? ecard_irqexp_handler : ecard_irq_handler);
1099 ecard_proc_init();
1101 return 0;
1104 subsys_initcall(ecard_init);
1107 * ECARD "bus"
1109 static const struct ecard_id *
1110 ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
1112 int i;
1114 for (i = 0; ids[i].manufacturer != 65535; i++)
1115 if (ec->cid.manufacturer == ids[i].manufacturer &&
1116 ec->cid.product == ids[i].product)
1117 return ids + i;
1119 return NULL;
1122 static int ecard_drv_probe(struct device *dev)
1124 struct expansion_card *ec = ECARD_DEV(dev);
1125 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1126 const struct ecard_id *id;
1127 int ret;
1129 id = ecard_match_device(drv->id_table, ec);
1131 ec->claimed = 1;
1132 ret = drv->probe(ec, id);
1133 if (ret)
1134 ec->claimed = 0;
1135 return ret;
1138 static int ecard_drv_remove(struct device *dev)
1140 struct expansion_card *ec = ECARD_DEV(dev);
1141 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1143 drv->remove(ec);
1144 ec->claimed = 0;
1147 * Restore the default operations. We ensure that the
1148 * ops are set before we change the data.
1150 ec->ops = &ecard_default_ops;
1151 barrier();
1152 ec->irq_data = NULL;
1154 return 0;
1158 * Before rebooting, we must make sure that the expansion card is in a
1159 * sensible state, so it can be re-detected. This means that the first
1160 * page of the ROM must be visible. We call the expansion cards reset
1161 * handler, if any.
1163 static void ecard_drv_shutdown(struct device *dev)
1165 struct expansion_card *ec = ECARD_DEV(dev);
1166 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1167 struct ecard_request req;
1169 if (dev->driver) {
1170 if (drv->shutdown)
1171 drv->shutdown(ec);
1172 ec->claimed = 0;
1176 * If this card has a loader, call the reset handler.
1178 if (ec->loader) {
1179 req.fn = ecard_task_reset;
1180 req.ec = ec;
1181 ecard_call(&req);
1185 int ecard_register_driver(struct ecard_driver *drv)
1187 drv->drv.bus = &ecard_bus_type;
1189 return driver_register(&drv->drv);
1192 void ecard_remove_driver(struct ecard_driver *drv)
1194 driver_unregister(&drv->drv);
1197 static int ecard_match(struct device *_dev, struct device_driver *_drv)
1199 struct expansion_card *ec = ECARD_DEV(_dev);
1200 struct ecard_driver *drv = ECARD_DRV(_drv);
1201 int ret;
1203 if (drv->id_table) {
1204 ret = ecard_match_device(drv->id_table, ec) != NULL;
1205 } else {
1206 ret = ec->cid.id == drv->id;
1209 return ret;
1212 struct bus_type ecard_bus_type = {
1213 .name = "ecard",
1214 .dev_attrs = ecard_dev_attrs,
1215 .match = ecard_match,
1216 .probe = ecard_drv_probe,
1217 .remove = ecard_drv_remove,
1218 .shutdown = ecard_drv_shutdown,
1221 static int ecard_bus_init(void)
1223 return bus_register(&ecard_bus_type);
1226 postcore_initcall(ecard_bus_init);
1228 EXPORT_SYMBOL(ecard_readchunk);
1229 EXPORT_SYMBOL(ecard_register_driver);
1230 EXPORT_SYMBOL(ecard_remove_driver);
1231 EXPORT_SYMBOL(ecard_bus_type);