drivers/ata/pata_cmd640.c

   1 /*
   2  * pata_cmd640.c        - CMD640 PCI PATA for new ATA layer
   3  *                        (C) 2007 Red Hat Inc
   4  *
   5  * Based upon
   6  *  linux/drivers/ide/pci/cmd640.c              Version 1.02  Sep 01, 1996
   7  *
   8  *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
   9  *
  10  *      This drives only the PCI version of the controller. If you have a
  11  *      VLB one then we have enough docs to support it but you can write
  12  *      your own code.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/pci.h>
  18 #include <linux/init.h>
  19 #include <linux/blkdev.h>
  20 #include <linux/delay.h>
  21 #include <scsi/scsi_host.h>
  22 #include <linux/libata.h>
  23
  24 #define DRV_NAME "pata_cmd640"
  25 #define DRV_VERSION "0.0.5"
  26
  27 struct cmd640_reg {
  28         int last;
  29         u8 reg58[ATA_MAX_DEVICES];
  30 };
  31
  32 enum {
  33         CFR = 0x50,
  34         CNTRL = 0x51,
  35         CMDTIM = 0x52,
  36         ARTIM0 = 0x53,
  37         DRWTIM0 = 0x54,
  38         ARTIM23 = 0x57,
  39         DRWTIM23 = 0x58,
  40         BRST = 0x59
  41 };
  42
  43 /**
  44  *      cmd640_set_piomode      -       set initial PIO mode data
  45  *      @ap: ATA port
  46  *      @adev: ATA device
  47  *
  48  *      Called to do the PIO mode setup.
  49  */
  50
  51 static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
  52 {
  53         struct cmd640_reg *timing = ap->private_data;
  54         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  55         struct ata_timing t;
  56         const unsigned long T = 1000000 / 33;
  57         const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
  58         u8 reg;
  59         int arttim = ARTIM0 + 2 * adev->devno;
  60         struct ata_device *pair = ata_dev_pair(adev);
  61
  62         if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
  63                 printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
  64                 return;
  65         }
  66
  67         /* The second channel has shared timings and the setup timing is
  68            messy to switch to merge it for worst case */
  69         if (ap->port_no && pair) {
  70                 struct ata_timing p;
  71                 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
  72                 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
  73         }
  74
  75         /* Make the timings fit */
  76         if (t.recover > 16) {
  77                 t.active += t.recover - 16;
  78                 t.recover = 16;
  79         }
  80         if (t.active > 16)
  81                 t.active = 16;
  82
  83         /* Now convert the clocks into values we can actually stuff into
  84            the chip */
  85
  86         if (t.recover > 1)
  87                 t.recover--;    /* 640B only */
  88         else
  89                 t.recover = 15;
  90
  91         if (t.setup > 4)
  92                 t.setup = 0xC0;
  93         else
  94                 t.setup = setup_data[t.setup];
  95
  96         if (ap->port_no == 0) {
  97                 t.active &= 0x0F;       /* 0 = 16 */
  98
  99                 /* Load setup timing */
 100                 pci_read_config_byte(pdev, arttim, &reg);
 101                 reg &= 0x3F;
 102                 reg |= t.setup;
 103                 pci_write_config_byte(pdev, arttim, reg);
 104
 105                 /* Load active/recovery */
 106                 pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
 107         } else {
 108                 /* Save the shared timings for channel, they will be loaded
 109                    by qc_issue. Reloading the setup time is expensive so we
 110                    keep a merged one loaded */
 111                 pci_read_config_byte(pdev, ARTIM23, &reg);
 112                 reg &= 0x3F;
 113                 reg |= t.setup;
 114                 pci_write_config_byte(pdev, ARTIM23, reg);
 115                 timing->reg58[adev->devno] = (t.active << 4) | t.recover;
 116         }
 117 }
 118
 119
 120 /**
 121  *      cmd640_qc_issue -       command preparation hook
 122  *      @qc: Command to be issued
 123  *
 124  *      Channel 1 has shared timings. We must reprogram the
 125  *      clock each drive 2/3 switch we do.
 126  */
 127
 128 static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
 129 {
 130         struct ata_port *ap = qc->ap;
 131         struct ata_device *adev = qc->dev;
 132         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 133         struct cmd640_reg *timing = ap->private_data;
 134
 135         if (ap->port_no != 0 && adev->devno != timing->last) {
 136                 pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
 137                 timing->last = adev->devno;
 138         }
 139         return ata_sff_qc_issue(qc);
 140 }
 141
 142 /**
 143  *      cmd640_port_start       -       port setup
 144  *      @ap: ATA port being set up
 145  *
 146  *      The CMD640 needs to maintain private data structures so we
 147  *      allocate space here.
 148  */
 149
 150 static int cmd640_port_start(struct ata_port *ap)
 151 {
 152         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 153         struct cmd640_reg *timing;
 154
 155         int ret = ata_sff_port_start(ap);
 156         if (ret < 0)
 157                 return ret;
 158
 159         timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
 160         if (timing == NULL)
 161                 return -ENOMEM;
 162         timing->last = -1;      /* Force a load */
 163         ap->private_data = timing;
 164         return ret;
 165 }
 166
 167 static struct scsi_host_template cmd640_sht = {
 168         ATA_BMDMA_SHT(DRV_NAME),
 169 };
 170
 171 static struct ata_port_operations cmd640_port_ops = {
 172         .inherits       = &ata_bmdma_port_ops,
 173         /* In theory xfer_noirq is not needed once we kill the prefetcher */
 174         .sff_data_xfer  = ata_sff_data_xfer_noirq,
 175         .qc_issue       = cmd640_qc_issue,
 176         .cable_detect   = ata_cable_40wire,
 177         .set_piomode    = cmd640_set_piomode,
 178         .port_start     = cmd640_port_start,
 179 };
 180
 181 static void cmd640_hardware_init(struct pci_dev *pdev)
 182 {
 183         u8 r;
 184         u8 ctrl;
 185
 186         /* CMD640 detected, commiserations */
 187         pci_write_config_byte(pdev, 0x5B, 0x00);
 188         /* Get version info */
 189         pci_read_config_byte(pdev, CFR, &r);
 190         /* PIO0 command cycles */
 191         pci_write_config_byte(pdev, CMDTIM, 0);
 192         /* 512 byte bursts (sector) */
 193         pci_write_config_byte(pdev, BRST, 0x40);
 194         /*
 195          * A reporter a long time ago
 196          * Had problems with the data fifo
 197          * So don't run the risk
 198          * Of putting crap on the disk
 199          * For its better just to go slow
 200          */
 201         /* Do channel 0 */
 202         pci_read_config_byte(pdev, CNTRL, &ctrl);
 203         pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
 204         /* Ditto for channel 1 */
 205         pci_read_config_byte(pdev, ARTIM23, &ctrl);
 206         ctrl |= 0x0C;
 207         pci_write_config_byte(pdev, ARTIM23, ctrl);
 208 }
 209
 210 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 211 {
 212         static const struct ata_port_info info = {
 213                 .flags = ATA_FLAG_SLAVE_POSS,
 214                 .pio_mask = ATA_PIO4,
 215                 .port_ops = &cmd640_port_ops
 216         };
 217         const struct ata_port_info *ppi[] = { &info, NULL };
 218         int rc;
 219
 220         rc = pcim_enable_device(pdev);
 221         if (rc)
 222                 return rc;
 223
 224         cmd640_hardware_init(pdev);
 225
 226         return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
 227 }
 228
 229 #ifdef CONFIG_PM
 230 static int cmd640_reinit_one(struct pci_dev *pdev)
 231 {
 232         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 233         int rc;
 234
 235         rc = ata_pci_device_do_resume(pdev);
 236         if (rc)
 237                 return rc;
 238         cmd640_hardware_init(pdev);
 239         ata_host_resume(host);
 240         return 0;
 241 }
 242 #endif
 243
 244 static const struct pci_device_id cmd640[] = {
 245         { PCI_VDEVICE(CMD, 0x640), 0 },
 246         { },
 247 };
 248
 249 static struct pci_driver cmd640_pci_driver = {
 250         .name           = DRV_NAME,
 251         .id_table       = cmd640,
 252         .probe          = cmd640_init_one,
 253         .remove         = ata_pci_remove_one,
 254 #ifdef CONFIG_PM
 255         .suspend        = ata_pci_device_suspend,
 256         .resume         = cmd640_reinit_one,
 257 #endif
 258 };
 259
 260 static int __init cmd640_init(void)
 261 {
 262         return pci_register_driver(&cmd640_pci_driver);
 263 }
 264
 265 static void __exit cmd640_exit(void)
 266 {
 267         pci_unregister_driver(&cmd640_pci_driver);
 268 }
 269
 270 MODULE_AUTHOR("Alan Cox");
 271 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
 272 MODULE_LICENSE("GPL");
 273 MODULE_DEVICE_TABLE(pci, cmd640);
 274 MODULE_VERSION(DRV_VERSION);
 275
 276 module_init(cmd640_init);
 277 module_exit(cmd640_exit);