USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / block / cciss.h
blob7fda30e4a2416195696b6a4eebd560d74fca6917
1 #ifndef CCISS_H
2 #define CCISS_H
4 #include <linux/genhd.h>
5 #include <linux/mutex.h>
7 #include "cciss_cmd.h"
10 #define NWD_SHIFT 4
11 #define MAX_PART (1 << NWD_SHIFT)
13 #define IO_OK 0
14 #define IO_ERROR 1
15 #define IO_NEEDS_RETRY 3
17 #define VENDOR_LEN 8
18 #define MODEL_LEN 16
19 #define REV_LEN 4
21 struct ctlr_info;
22 typedef struct ctlr_info ctlr_info_t;
24 struct access_method {
25 void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
26 void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
27 unsigned long (*fifo_full)(ctlr_info_t *h);
28 bool (*intr_pending)(ctlr_info_t *h);
29 unsigned long (*command_completed)(ctlr_info_t *h);
31 typedef struct _drive_info_struct
33 unsigned char LunID[8];
34 int usage_count;
35 struct request_queue *queue;
36 sector_t nr_blocks;
37 int block_size;
38 int heads;
39 int sectors;
40 int cylinders;
41 int raid_level; /* set to -1 to indicate that
42 * the drive is not in use/configured
44 int busy_configuring; /* This is set when a drive is being removed
45 * to prevent it from being opened or it's
46 * queue from being started.
48 struct device dev;
49 __u8 serial_no[16]; /* from inquiry page 0x83,
50 * not necc. null terminated.
52 char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
53 char model[MODEL_LEN + 1]; /* SCSI model string */
54 char rev[REV_LEN + 1]; /* SCSI revision string */
55 char device_initialized; /* indicates whether dev is initialized */
56 } drive_info_struct;
58 struct ctlr_info
60 int ctlr;
61 char devname[8];
62 char *product_name;
63 char firm_ver[4]; /* Firmware version */
64 struct pci_dev *pdev;
65 __u32 board_id;
66 void __iomem *vaddr;
67 unsigned long paddr;
68 int nr_cmds; /* Number of commands allowed on this controller */
69 CfgTable_struct __iomem *cfgtable;
70 int interrupts_enabled;
71 int major;
72 int max_commands;
73 int commands_outstanding;
74 int max_outstanding; /* Debug */
75 int num_luns;
76 int highest_lun;
77 int usage_count; /* number of opens all all minor devices */
78 /* Need space for temp sg list
79 * number of scatter/gathers supported
80 * number of scatter/gathers in chained block
82 struct scatterlist **scatter_list;
83 int maxsgentries;
84 int chainsize;
85 int max_cmd_sgentries;
86 SGDescriptor_struct **cmd_sg_list;
88 # define PERF_MODE_INT 0
89 # define DOORBELL_INT 1
90 # define SIMPLE_MODE_INT 2
91 # define MEMQ_MODE_INT 3
92 unsigned int intr[4];
93 unsigned int msix_vector;
94 unsigned int msi_vector;
95 int intr_mode;
96 int cciss_max_sectors;
97 BYTE cciss_read;
98 BYTE cciss_write;
99 BYTE cciss_read_capacity;
101 /* information about each logical volume */
102 drive_info_struct *drv[CISS_MAX_LUN];
104 struct access_method access;
106 /* queue and queue Info */
107 struct list_head reqQ;
108 struct list_head cmpQ;
109 unsigned int Qdepth;
110 unsigned int maxQsinceinit;
111 unsigned int maxSG;
112 spinlock_t lock;
114 /* pointers to command and error info pool */
115 CommandList_struct *cmd_pool;
116 dma_addr_t cmd_pool_dhandle;
117 ErrorInfo_struct *errinfo_pool;
118 dma_addr_t errinfo_pool_dhandle;
119 unsigned long *cmd_pool_bits;
120 int nr_allocs;
121 int nr_frees;
122 int busy_configuring;
123 int busy_initializing;
124 int busy_scanning;
125 struct mutex busy_shutting_down;
127 /* This element holds the zero based queue number of the last
128 * queue to be started. It is used for fairness.
130 int next_to_run;
132 /* Disk structures we need to pass back */
133 struct gendisk *gendisk[CISS_MAX_LUN];
134 #ifdef CONFIG_CISS_SCSI_TAPE
135 struct cciss_scsi_adapter_data_t *scsi_ctlr;
136 #endif
137 unsigned char alive;
138 struct list_head scan_list;
139 struct completion scan_wait;
140 struct device dev;
142 * Performant mode tables.
144 u32 trans_support;
145 u32 trans_offset;
146 struct TransTable_struct *transtable;
147 unsigned long transMethod;
150 * Performant mode completion buffer
152 u64 *reply_pool;
153 dma_addr_t reply_pool_dhandle;
154 u64 *reply_pool_head;
155 size_t reply_pool_size;
156 unsigned char reply_pool_wraparound;
157 u32 *blockFetchTable;
160 /* Defining the diffent access_methods
162 * Memory mapped FIFO interface (SMART 53xx cards)
164 #define SA5_DOORBELL 0x20
165 #define SA5_REQUEST_PORT_OFFSET 0x40
166 #define SA5_REPLY_INTR_MASK_OFFSET 0x34
167 #define SA5_REPLY_PORT_OFFSET 0x44
168 #define SA5_INTR_STATUS 0x30
169 #define SA5_SCRATCHPAD_OFFSET 0xB0
171 #define SA5_CTCFG_OFFSET 0xB4
172 #define SA5_CTMEM_OFFSET 0xB8
174 #define SA5_INTR_OFF 0x08
175 #define SA5B_INTR_OFF 0x04
176 #define SA5_INTR_PENDING 0x08
177 #define SA5B_INTR_PENDING 0x04
178 #define FIFO_EMPTY 0xffffffff
179 #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
180 /* Perf. mode flags */
181 #define SA5_PERF_INTR_PENDING 0x04
182 #define SA5_PERF_INTR_OFF 0x05
183 #define SA5_OUTDB_STATUS_PERF_BIT 0x01
184 #define SA5_OUTDB_CLEAR_PERF_BIT 0x01
185 #define SA5_OUTDB_CLEAR 0xA0
186 #define SA5_OUTDB_CLEAR_PERF_BIT 0x01
187 #define SA5_OUTDB_STATUS 0x9C
190 #define CISS_ERROR_BIT 0x02
192 #define CCISS_INTR_ON 1
193 #define CCISS_INTR_OFF 0
196 /* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
197 * to become ready, in seconds, before giving up on it.
198 * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
199 * between polling the board to see if it is ready, in
200 * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived
201 * the above.
203 #define CCISS_BOARD_READY_WAIT_SECS (120)
204 #define CCISS_BOARD_NOT_READY_WAIT_SECS (100)
205 #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
206 #define CCISS_BOARD_READY_ITERATIONS \
207 ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
208 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
209 #define CCISS_BOARD_NOT_READY_ITERATIONS \
210 ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
211 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
212 #define CCISS_POST_RESET_PAUSE_MSECS (3000)
213 #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000)
214 #define CCISS_POST_RESET_NOOP_RETRIES (12)
215 #define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000)
218 Send the command to the hardware
220 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
222 #ifdef CCISS_DEBUG
223 printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
224 h->ctlr, c->busaddr);
225 #endif /* CCISS_DEBUG */
226 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
227 readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
228 h->commands_outstanding++;
229 if ( h->commands_outstanding > h->max_outstanding)
230 h->max_outstanding = h->commands_outstanding;
234 * This card is the opposite of the other cards.
235 * 0 turns interrupts on...
236 * 0x08 turns them off...
238 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
240 if (val)
241 { /* Turn interrupts on */
242 h->interrupts_enabled = 1;
243 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
244 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
245 } else /* Turn them off */
247 h->interrupts_enabled = 0;
248 writel( SA5_INTR_OFF,
249 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
250 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
254 * This card is the opposite of the other cards.
255 * 0 turns interrupts on...
256 * 0x04 turns them off...
258 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
260 if (val)
261 { /* Turn interrupts on */
262 h->interrupts_enabled = 1;
263 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
264 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
265 } else /* Turn them off */
267 h->interrupts_enabled = 0;
268 writel( SA5B_INTR_OFF,
269 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
270 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
274 /* Performant mode intr_mask */
275 static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
277 if (val) { /* turn on interrupts */
278 h->interrupts_enabled = 1;
279 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
280 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
281 } else {
282 h->interrupts_enabled = 0;
283 writel(SA5_PERF_INTR_OFF,
284 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
285 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
290 * Returns true if fifo is full.
293 static unsigned long SA5_fifo_full(ctlr_info_t *h)
295 if( h->commands_outstanding >= h->max_commands)
296 return(1);
297 else
298 return(0);
302 * returns value read from hardware.
303 * returns FIFO_EMPTY if there is nothing to read
305 static unsigned long SA5_completed(ctlr_info_t *h)
307 unsigned long register_value
308 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
309 if(register_value != FIFO_EMPTY)
311 h->commands_outstanding--;
312 #ifdef CCISS_DEBUG
313 printk("cciss: Read %lx back from board\n", register_value);
314 #endif /* CCISS_DEBUG */
316 #ifdef CCISS_DEBUG
317 else
319 printk("cciss: FIFO Empty read\n");
321 #endif
322 return ( register_value);
326 /* Performant mode command completed */
327 static unsigned long SA5_performant_completed(ctlr_info_t *h)
329 unsigned long register_value = FIFO_EMPTY;
331 /* flush the controller write of the reply queue by reading
332 * outbound doorbell status register.
334 register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
335 /* msi auto clears the interrupt pending bit. */
336 if (!(h->msi_vector || h->msix_vector)) {
337 writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
338 /* Do a read in order to flush the write to the controller
339 * (as per spec.)
341 register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
344 if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
345 register_value = *(h->reply_pool_head);
346 (h->reply_pool_head)++;
347 h->commands_outstanding--;
348 } else {
349 register_value = FIFO_EMPTY;
351 /* Check for wraparound */
352 if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
353 h->reply_pool_head = h->reply_pool;
354 h->reply_pool_wraparound ^= 1;
357 return register_value;
360 * Returns true if an interrupt is pending..
362 static bool SA5_intr_pending(ctlr_info_t *h)
364 unsigned long register_value =
365 readl(h->vaddr + SA5_INTR_STATUS);
366 #ifdef CCISS_DEBUG
367 printk("cciss: intr_pending %lx\n", register_value);
368 #endif /* CCISS_DEBUG */
369 if( register_value & SA5_INTR_PENDING)
370 return 1;
371 return 0 ;
375 * Returns true if an interrupt is pending..
377 static bool SA5B_intr_pending(ctlr_info_t *h)
379 unsigned long register_value =
380 readl(h->vaddr + SA5_INTR_STATUS);
381 #ifdef CCISS_DEBUG
382 printk("cciss: intr_pending %lx\n", register_value);
383 #endif /* CCISS_DEBUG */
384 if( register_value & SA5B_INTR_PENDING)
385 return 1;
386 return 0 ;
389 static bool SA5_performant_intr_pending(ctlr_info_t *h)
391 unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
393 if (!register_value)
394 return false;
396 if (h->msi_vector || h->msix_vector)
397 return true;
399 /* Read outbound doorbell to flush */
400 register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
401 return register_value & SA5_OUTDB_STATUS_PERF_BIT;
404 static struct access_method SA5_access = {
405 SA5_submit_command,
406 SA5_intr_mask,
407 SA5_fifo_full,
408 SA5_intr_pending,
409 SA5_completed,
412 static struct access_method SA5B_access = {
413 SA5_submit_command,
414 SA5B_intr_mask,
415 SA5_fifo_full,
416 SA5B_intr_pending,
417 SA5_completed,
420 static struct access_method SA5_performant_access = {
421 SA5_submit_command,
422 SA5_performant_intr_mask,
423 SA5_fifo_full,
424 SA5_performant_intr_pending,
425 SA5_performant_completed,
428 struct board_type {
429 __u32 board_id;
430 char *product_name;
431 struct access_method *access;
432 int nr_cmds; /* Max cmds this kind of ctlr can handle. */
435 #endif /* CCISS_H */