b43: Add simple firmware watchdog
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / kernel / irq / chip.c
blob964964baefa23c2a8bdee504aa053d078ba29ad9
1 /*
2 * linux/kernel/irq/chip.c
4 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
5 * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
7 * This file contains the core interrupt handling code, for irq-chip
8 * based architectures.
10 * Detailed information is available in Documentation/DocBook/genericirq
13 #include <linux/irq.h>
14 #include <linux/msi.h>
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/kernel_stat.h>
19 #include "internals.h"
21 /**
22 * dynamic_irq_init - initialize a dynamically allocated irq
23 * @irq: irq number to initialize
25 void dynamic_irq_init(unsigned int irq)
27 struct irq_desc *desc;
28 unsigned long flags;
30 if (irq >= NR_IRQS) {
31 printk(KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
32 WARN_ON(1);
33 return;
36 /* Ensure we don't have left over values from a previous use of this irq */
37 desc = irq_desc + irq;
38 spin_lock_irqsave(&desc->lock, flags);
39 desc->status = IRQ_DISABLED;
40 desc->chip = &no_irq_chip;
41 desc->handle_irq = handle_bad_irq;
42 desc->depth = 1;
43 desc->msi_desc = NULL;
44 desc->handler_data = NULL;
45 desc->chip_data = NULL;
46 desc->action = NULL;
47 desc->irq_count = 0;
48 desc->irqs_unhandled = 0;
49 #ifdef CONFIG_SMP
50 cpus_setall(desc->affinity);
51 #endif
52 spin_unlock_irqrestore(&desc->lock, flags);
55 /**
56 * dynamic_irq_cleanup - cleanup a dynamically allocated irq
57 * @irq: irq number to initialize
59 void dynamic_irq_cleanup(unsigned int irq)
61 struct irq_desc *desc;
62 unsigned long flags;
64 if (irq >= NR_IRQS) {
65 printk(KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
66 WARN_ON(1);
67 return;
70 desc = irq_desc + irq;
71 spin_lock_irqsave(&desc->lock, flags);
72 if (desc->action) {
73 spin_unlock_irqrestore(&desc->lock, flags);
74 printk(KERN_ERR "Destroying IRQ%d without calling free_irq\n",
75 irq);
76 WARN_ON(1);
77 return;
79 desc->msi_desc = NULL;
80 desc->handler_data = NULL;
81 desc->chip_data = NULL;
82 desc->handle_irq = handle_bad_irq;
83 desc->chip = &no_irq_chip;
84 spin_unlock_irqrestore(&desc->lock, flags);
88 /**
89 * set_irq_chip - set the irq chip for an irq
90 * @irq: irq number
91 * @chip: pointer to irq chip description structure
93 int set_irq_chip(unsigned int irq, struct irq_chip *chip)
95 struct irq_desc *desc;
96 unsigned long flags;
98 if (irq >= NR_IRQS) {
99 printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
100 WARN_ON(1);
101 return -EINVAL;
104 if (!chip)
105 chip = &no_irq_chip;
107 desc = irq_desc + irq;
108 spin_lock_irqsave(&desc->lock, flags);
109 irq_chip_set_defaults(chip);
110 desc->chip = chip;
111 spin_unlock_irqrestore(&desc->lock, flags);
113 return 0;
115 EXPORT_SYMBOL(set_irq_chip);
118 * set_irq_type - set the irq type for an irq
119 * @irq: irq number
120 * @type: interrupt type - see include/linux/interrupt.h
122 int set_irq_type(unsigned int irq, unsigned int type)
124 struct irq_desc *desc;
125 unsigned long flags;
126 int ret = -ENXIO;
128 if (irq >= NR_IRQS) {
129 printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
130 return -ENODEV;
133 desc = irq_desc + irq;
134 if (desc->chip->set_type) {
135 spin_lock_irqsave(&desc->lock, flags);
136 ret = desc->chip->set_type(irq, type);
137 spin_unlock_irqrestore(&desc->lock, flags);
139 return ret;
141 EXPORT_SYMBOL(set_irq_type);
144 * set_irq_data - set irq type data for an irq
145 * @irq: Interrupt number
146 * @data: Pointer to interrupt specific data
148 * Set the hardware irq controller data for an irq
150 int set_irq_data(unsigned int irq, void *data)
152 struct irq_desc *desc;
153 unsigned long flags;
155 if (irq >= NR_IRQS) {
156 printk(KERN_ERR
157 "Trying to install controller data for IRQ%d\n", irq);
158 return -EINVAL;
161 desc = irq_desc + irq;
162 spin_lock_irqsave(&desc->lock, flags);
163 desc->handler_data = data;
164 spin_unlock_irqrestore(&desc->lock, flags);
165 return 0;
167 EXPORT_SYMBOL(set_irq_data);
170 * set_irq_data - set irq type data for an irq
171 * @irq: Interrupt number
172 * @entry: Pointer to MSI descriptor data
174 * Set the hardware irq controller data for an irq
176 int set_irq_msi(unsigned int irq, struct msi_desc *entry)
178 struct irq_desc *desc;
179 unsigned long flags;
181 if (irq >= NR_IRQS) {
182 printk(KERN_ERR
183 "Trying to install msi data for IRQ%d\n", irq);
184 return -EINVAL;
186 desc = irq_desc + irq;
187 spin_lock_irqsave(&desc->lock, flags);
188 desc->msi_desc = entry;
189 if (entry)
190 entry->irq = irq;
191 spin_unlock_irqrestore(&desc->lock, flags);
192 return 0;
196 * set_irq_chip_data - set irq chip data for an irq
197 * @irq: Interrupt number
198 * @data: Pointer to chip specific data
200 * Set the hardware irq chip data for an irq
202 int set_irq_chip_data(unsigned int irq, void *data)
204 struct irq_desc *desc = irq_desc + irq;
205 unsigned long flags;
207 if (irq >= NR_IRQS || !desc->chip) {
208 printk(KERN_ERR "BUG: bad set_irq_chip_data(IRQ#%d)\n", irq);
209 return -EINVAL;
212 spin_lock_irqsave(&desc->lock, flags);
213 desc->chip_data = data;
214 spin_unlock_irqrestore(&desc->lock, flags);
216 return 0;
218 EXPORT_SYMBOL(set_irq_chip_data);
221 * default enable function
223 static void default_enable(unsigned int irq)
225 struct irq_desc *desc = irq_desc + irq;
227 desc->chip->unmask(irq);
228 desc->status &= ~IRQ_MASKED;
232 * default disable function
234 static void default_disable(unsigned int irq)
239 * default startup function
241 static unsigned int default_startup(unsigned int irq)
243 irq_desc[irq].chip->enable(irq);
245 return 0;
249 * default shutdown function
251 static void default_shutdown(unsigned int irq)
253 struct irq_desc *desc = irq_desc + irq;
255 desc->chip->mask(irq);
256 desc->status |= IRQ_MASKED;
260 * Fixup enable/disable function pointers
262 void irq_chip_set_defaults(struct irq_chip *chip)
264 if (!chip->enable)
265 chip->enable = default_enable;
266 if (!chip->disable)
267 chip->disable = default_disable;
268 if (!chip->startup)
269 chip->startup = default_startup;
271 * We use chip->disable, when the user provided its own. When
272 * we have default_disable set for chip->disable, then we need
273 * to use default_shutdown, otherwise the irq line is not
274 * disabled on free_irq():
276 if (!chip->shutdown)
277 chip->shutdown = chip->disable != default_disable ?
278 chip->disable : default_shutdown;
279 if (!chip->name)
280 chip->name = chip->typename;
281 if (!chip->end)
282 chip->end = dummy_irq_chip.end;
285 static inline void mask_ack_irq(struct irq_desc *desc, int irq)
287 if (desc->chip->mask_ack)
288 desc->chip->mask_ack(irq);
289 else {
290 desc->chip->mask(irq);
291 desc->chip->ack(irq);
296 * handle_simple_irq - Simple and software-decoded IRQs.
297 * @irq: the interrupt number
298 * @desc: the interrupt description structure for this irq
300 * Simple interrupts are either sent from a demultiplexing interrupt
301 * handler or come from hardware, where no interrupt hardware control
302 * is necessary.
304 * Note: The caller is expected to handle the ack, clear, mask and
305 * unmask issues if necessary.
307 void
308 handle_simple_irq(unsigned int irq, struct irq_desc *desc)
310 struct irqaction *action;
311 irqreturn_t action_ret;
312 const unsigned int cpu = smp_processor_id();
314 spin_lock(&desc->lock);
316 if (unlikely(desc->status & IRQ_INPROGRESS))
317 goto out_unlock;
318 desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
319 kstat_cpu(cpu).irqs[irq]++;
321 action = desc->action;
322 if (unlikely(!action || (desc->status & IRQ_DISABLED)))
323 goto out_unlock;
325 desc->status |= IRQ_INPROGRESS;
326 spin_unlock(&desc->lock);
328 action_ret = handle_IRQ_event(irq, action);
329 if (!noirqdebug)
330 note_interrupt(irq, desc, action_ret);
332 spin_lock(&desc->lock);
333 desc->status &= ~IRQ_INPROGRESS;
334 out_unlock:
335 spin_unlock(&desc->lock);
339 * handle_level_irq - Level type irq handler
340 * @irq: the interrupt number
341 * @desc: the interrupt description structure for this irq
343 * Level type interrupts are active as long as the hardware line has
344 * the active level. This may require to mask the interrupt and unmask
345 * it after the associated handler has acknowledged the device, so the
346 * interrupt line is back to inactive.
348 void
349 handle_level_irq(unsigned int irq, struct irq_desc *desc)
351 unsigned int cpu = smp_processor_id();
352 struct irqaction *action;
353 irqreturn_t action_ret;
355 spin_lock(&desc->lock);
356 mask_ack_irq(desc, irq);
358 if (unlikely(desc->status & IRQ_INPROGRESS))
359 goto out_unlock;
360 desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
361 kstat_cpu(cpu).irqs[irq]++;
364 * If its disabled or no action available
365 * keep it masked and get out of here
367 action = desc->action;
368 if (unlikely(!action || (desc->status & IRQ_DISABLED)))
369 goto out_unlock;
371 desc->status |= IRQ_INPROGRESS;
372 spin_unlock(&desc->lock);
374 action_ret = handle_IRQ_event(irq, action);
375 if (!noirqdebug)
376 note_interrupt(irq, desc, action_ret);
378 spin_lock(&desc->lock);
379 desc->status &= ~IRQ_INPROGRESS;
380 if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
381 desc->chip->unmask(irq);
382 out_unlock:
383 spin_unlock(&desc->lock);
387 * handle_fasteoi_irq - irq handler for transparent controllers
388 * @irq: the interrupt number
389 * @desc: the interrupt description structure for this irq
391 * Only a single callback will be issued to the chip: an ->eoi()
392 * call when the interrupt has been serviced. This enables support
393 * for modern forms of interrupt handlers, which handle the flow
394 * details in hardware, transparently.
396 void
397 handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
399 unsigned int cpu = smp_processor_id();
400 struct irqaction *action;
401 irqreturn_t action_ret;
403 spin_lock(&desc->lock);
405 if (unlikely(desc->status & IRQ_INPROGRESS))
406 goto out;
408 desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
409 kstat_cpu(cpu).irqs[irq]++;
412 * If its disabled or no action available
413 * then mask it and get out of here:
415 action = desc->action;
416 if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
417 desc->status |= IRQ_PENDING;
418 if (desc->chip->mask)
419 desc->chip->mask(irq);
420 goto out;
423 desc->status |= IRQ_INPROGRESS;
424 desc->status &= ~IRQ_PENDING;
425 spin_unlock(&desc->lock);
427 action_ret = handle_IRQ_event(irq, action);
428 if (!noirqdebug)
429 note_interrupt(irq, desc, action_ret);
431 spin_lock(&desc->lock);
432 desc->status &= ~IRQ_INPROGRESS;
433 out:
434 desc->chip->eoi(irq);
436 spin_unlock(&desc->lock);
440 * handle_edge_irq - edge type IRQ handler
441 * @irq: the interrupt number
442 * @desc: the interrupt description structure for this irq
444 * Interrupt occures on the falling and/or rising edge of a hardware
445 * signal. The occurence is latched into the irq controller hardware
446 * and must be acked in order to be reenabled. After the ack another
447 * interrupt can happen on the same source even before the first one
448 * is handled by the assosiacted event handler. If this happens it
449 * might be necessary to disable (mask) the interrupt depending on the
450 * controller hardware. This requires to reenable the interrupt inside
451 * of the loop which handles the interrupts which have arrived while
452 * the handler was running. If all pending interrupts are handled, the
453 * loop is left.
455 void
456 handle_edge_irq(unsigned int irq, struct irq_desc *desc)
458 const unsigned int cpu = smp_processor_id();
460 spin_lock(&desc->lock);
462 desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
465 * If we're currently running this IRQ, or its disabled,
466 * we shouldn't process the IRQ. Mark it pending, handle
467 * the necessary masking and go out
469 if (unlikely((desc->status & (IRQ_INPROGRESS | IRQ_DISABLED)) ||
470 !desc->action)) {
471 desc->status |= (IRQ_PENDING | IRQ_MASKED);
472 mask_ack_irq(desc, irq);
473 goto out_unlock;
476 kstat_cpu(cpu).irqs[irq]++;
478 /* Start handling the irq */
479 desc->chip->ack(irq);
481 /* Mark the IRQ currently in progress.*/
482 desc->status |= IRQ_INPROGRESS;
484 do {
485 struct irqaction *action = desc->action;
486 irqreturn_t action_ret;
488 if (unlikely(!action)) {
489 desc->chip->mask(irq);
490 goto out_unlock;
494 * When another irq arrived while we were handling
495 * one, we could have masked the irq.
496 * Renable it, if it was not disabled in meantime.
498 if (unlikely((desc->status &
499 (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
500 (IRQ_PENDING | IRQ_MASKED))) {
501 desc->chip->unmask(irq);
502 desc->status &= ~IRQ_MASKED;
505 desc->status &= ~IRQ_PENDING;
506 spin_unlock(&desc->lock);
507 action_ret = handle_IRQ_event(irq, action);
508 if (!noirqdebug)
509 note_interrupt(irq, desc, action_ret);
510 spin_lock(&desc->lock);
512 } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
514 desc->status &= ~IRQ_INPROGRESS;
515 out_unlock:
516 spin_unlock(&desc->lock);
520 * handle_percpu_IRQ - Per CPU local irq handler
521 * @irq: the interrupt number
522 * @desc: the interrupt description structure for this irq
524 * Per CPU interrupts on SMP machines without locking requirements
526 void
527 handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
529 irqreturn_t action_ret;
531 kstat_this_cpu.irqs[irq]++;
533 if (desc->chip->ack)
534 desc->chip->ack(irq);
536 action_ret = handle_IRQ_event(irq, desc->action);
537 if (!noirqdebug)
538 note_interrupt(irq, desc, action_ret);
540 if (desc->chip->eoi)
541 desc->chip->eoi(irq);
544 void
545 __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
546 const char *name)
548 struct irq_desc *desc;
549 unsigned long flags;
551 if (irq >= NR_IRQS) {
552 printk(KERN_ERR
553 "Trying to install type control for IRQ%d\n", irq);
554 return;
557 desc = irq_desc + irq;
559 if (!handle)
560 handle = handle_bad_irq;
561 else if (desc->chip == &no_irq_chip) {
562 printk(KERN_WARNING "Trying to install %sinterrupt handler "
563 "for IRQ%d\n", is_chained ? "chained " : "", irq);
565 * Some ARM implementations install a handler for really dumb
566 * interrupt hardware without setting an irq_chip. This worked
567 * with the ARM no_irq_chip but the check in setup_irq would
568 * prevent us to setup the interrupt at all. Switch it to
569 * dummy_irq_chip for easy transition.
571 desc->chip = &dummy_irq_chip;
574 spin_lock_irqsave(&desc->lock, flags);
576 /* Uninstall? */
577 if (handle == handle_bad_irq) {
578 if (desc->chip != &no_irq_chip)
579 mask_ack_irq(desc, irq);
580 desc->status |= IRQ_DISABLED;
581 desc->depth = 1;
583 desc->handle_irq = handle;
584 desc->name = name;
586 if (handle != handle_bad_irq && is_chained) {
587 desc->status &= ~IRQ_DISABLED;
588 desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
589 desc->depth = 0;
590 desc->chip->unmask(irq);
592 spin_unlock_irqrestore(&desc->lock, flags);
595 void
596 set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
597 irq_flow_handler_t handle)
599 set_irq_chip(irq, chip);
600 __set_irq_handler(irq, handle, 0, NULL);
603 void
604 set_irq_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
605 irq_flow_handler_t handle, const char *name)
607 set_irq_chip(irq, chip);
608 __set_irq_handler(irq, handle, 0, name);
611 void __init set_irq_noprobe(unsigned int irq)
613 struct irq_desc *desc;
614 unsigned long flags;
616 if (irq >= NR_IRQS) {
617 printk(KERN_ERR "Trying to mark IRQ%d non-probeable\n", irq);
619 return;
622 desc = irq_desc + irq;
624 spin_lock_irqsave(&desc->lock, flags);
625 desc->status |= IRQ_NOPROBE;
626 spin_unlock_irqrestore(&desc->lock, flags);
629 void __init set_irq_probe(unsigned int irq)
631 struct irq_desc *desc;
632 unsigned long flags;
634 if (irq >= NR_IRQS) {
635 printk(KERN_ERR "Trying to mark IRQ%d probeable\n", irq);
637 return;
640 desc = irq_desc + irq;
642 spin_lock_irqsave(&desc->lock, flags);
643 desc->status &= ~IRQ_NOPROBE;
644 spin_unlock_irqrestore(&desc->lock, flags);