include/linux/pm.h

   1 /*
   2  *  pm.h - Power management interface
   3  *
   4  *  Copyright (C) 2000 Andrew Henroid
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #ifndef _LINUX_PM_H
  22 #define _LINUX_PM_H
  23
  24 #ifdef __KERNEL__
  25
  26 #include <linux/list.h>
  27 #include <asm/atomic.h>
  28 #include <asm/errno.h>
  29
  30 /*
  31  * Power management requests... these are passed to pm_send_all() and friends.
  32  *
  33  * these functions are old and deprecated, see below.
  34  */
  35 typedef int __bitwise pm_request_t;
  36
  37 #define PM_SUSPEND      ((__force pm_request_t) 1)      /* enter D1-D3 */
  38 #define PM_RESUME       ((__force pm_request_t) 2)      /* enter D0 */
  39
  40
  41 /*
  42  * Device types... these are passed to pm_register
  43  */
  44 typedef int __bitwise pm_dev_t;
  45
  46 #define PM_UNKNOWN_DEV  ((__force pm_dev_t) 0)  /* generic */
  47 #define PM_SYS_DEV      ((__force pm_dev_t) 1)  /* system device (fan, KB controller, ...) */
  48 #define PM_PCI_DEV      ((__force pm_dev_t) 2)  /* PCI device */
  49 #define PM_USB_DEV      ((__force pm_dev_t) 3)  /* USB device */
  50 #define PM_SCSI_DEV     ((__force pm_dev_t) 4)  /* SCSI device */
  51 #define PM_ISA_DEV      ((__force pm_dev_t) 5)  /* ISA device */
  52 #define PM_MTD_DEV      ((__force pm_dev_t) 6)  /* Memory Technology Device */
  53
  54 /*
  55  * System device hardware ID (PnP) values
  56  */
  57 enum
  58 {
  59         PM_SYS_UNKNOWN = 0x00000000, /* generic */
  60         PM_SYS_KBC =     0x41d00303, /* keyboard controller */
  61         PM_SYS_COM =     0x41d00500, /* serial port */
  62         PM_SYS_IRDA =    0x41d00510, /* IRDA controller */
  63         PM_SYS_FDC =     0x41d00700, /* floppy controller */
  64         PM_SYS_VGA =     0x41d00900, /* VGA controller */
  65         PM_SYS_PCMCIA =  0x41d00e00, /* PCMCIA controller */
  66 };
  67
  68 /*
  69  * Device identifier
  70  */
  71 #define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
  72
  73 /*
  74  * Request handler callback
  75  */
  76 struct pm_dev;
  77
  78 typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
  79
  80 /*
  81  * Dynamic device information
  82  */
  83 struct pm_dev
  84 {
  85         pm_dev_t         type;
  86         unsigned long    id;
  87         pm_callback      callback;
  88         void            *data;
  89
  90         unsigned long    flags;
  91         unsigned long    state;
  92         unsigned long    prev_state;
  93
  94         struct list_head entry;
  95 };
  96
  97 /* Functions above this comment are list-based old-style power
  98  * management. Please avoid using them.  */
  99
 100 /*
 101  * Callbacks for platform drivers to implement.
 102  */
 103 extern void (*pm_idle)(void);
 104 extern void (*pm_power_off)(void);
 105 extern void (*pm_power_off_prepare)(void);
 106
 107 /*
 108  * Device power management
 109  */
 110
 111 struct device;
 112
 113 typedef struct pm_message {
 114         int event;
 115 } pm_message_t;
 116
 117 /*
 118  * Several driver power state transitions are externally visible, affecting
 119  * the state of pending I/O queues and (for drivers that touch hardware)
 120  * interrupts, wakeups, DMA, and other hardware state.  There may also be
 121  * internal transitions to various low power modes, which are transparent
 122  * to the rest of the driver stack (such as a driver that's ON gating off
 123  * clocks which are not in active use).
 124  *
 125  * One transition is triggered by resume(), after a suspend() call; the
 126  * message is implicit:
 127  *
 128  * ON           Driver starts working again, responding to hardware events
 129  *              and software requests.  The hardware may have gone through
 130  *              a power-off reset, or it may have maintained state from the
 131  *              previous suspend() which the driver will rely on while
 132  *              resuming.  On most platforms, there are no restrictions on
 133  *              availability of resources like clocks during resume().
 134  *
 135  * Other transitions are triggered by messages sent using suspend().  All
 136  * these transitions quiesce the driver, so that I/O queues are inactive.
 137  * That commonly entails turning off IRQs and DMA; there may be rules
 138  * about how to quiesce that are specific to the bus or the device's type.
 139  * (For example, network drivers mark the link state.)  Other details may
 140  * differ according to the message:
 141  *
 142  * SUSPEND      Quiesce, enter a low power device state appropriate for
 143  *              the upcoming system state (such as PCI_D3hot), and enable
 144  *              wakeup events as appropriate.
 145  *
 146  * HIBERNATE    Enter a low power device state appropriate for the hibernation
 147  *              state (eg. ACPI S4) and enable wakeup events as appropriate.
 148  *
 149  * FREEZE       Quiesce operations so that a consistent image can be saved;
 150  *              but do NOT otherwise enter a low power device state, and do
 151  *              NOT emit system wakeup events.
 152  *
 153  * PRETHAW      Quiesce as if for FREEZE; additionally, prepare for restoring
 154  *              the system from a snapshot taken after an earlier FREEZE.
 155  *              Some drivers will need to reset their hardware state instead
 156  *              of preserving it, to ensure that it's never mistaken for the
 157  *              state which that earlier snapshot had set up.
 158  *
 159  * A minimally power-aware driver treats all messages as SUSPEND, fully
 160  * reinitializes its device during resume() -- whether or not it was reset
 161  * during the suspend/resume cycle -- and can't issue wakeup events.
 162  *
 163  * More power-aware drivers may also use low power states at runtime as
 164  * well as during system sleep states like PM_SUSPEND_STANDBY.  They may
 165  * be able to use wakeup events to exit from runtime low-power states,
 166  * or from system low-power states such as standby or suspend-to-RAM.
 167  */
 168
 169 #define PM_EVENT_ON 0
 170 #define PM_EVENT_FREEZE 1
 171 #define PM_EVENT_SUSPEND 2
 172 #define PM_EVENT_HIBERNATE 4
 173 #define PM_EVENT_PRETHAW 8
 174
 175 #define PM_EVENT_SLEEP  (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
 176
 177 #define PMSG_FREEZE     ((struct pm_message){ .event = PM_EVENT_FREEZE, })
 178 #define PMSG_PRETHAW    ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
 179 #define PMSG_SUSPEND    ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
 180 #define PMSG_HIBERNATE  ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
 181 #define PMSG_ON         ((struct pm_message){ .event = PM_EVENT_ON, })
 182
 183 struct dev_pm_info {
 184         pm_message_t            power_state;
 185         unsigned                can_wakeup:1;
 186         unsigned                should_wakeup:1;
 187         bool                    sleeping:1;     /* Owned by the PM core */
 188 #ifdef  CONFIG_PM_SLEEP
 189         struct list_head        entry;
 190 #endif
 191 };
 192
 193 extern int device_power_down(pm_message_t state);
 194 extern void device_power_up(void);
 195 extern void device_resume(void);
 196
 197 #ifdef CONFIG_PM_SLEEP
 198 extern int device_suspend(pm_message_t state);
 199 extern int device_prepare_suspend(pm_message_t state);
 200
 201 extern void __suspend_report_result(const char *function, void *fn, int ret);
 202
 203 #define suspend_report_result(fn, ret)                                  \
 204         do {                                                            \
 205                 __suspend_report_result(__FUNCTION__, fn, ret);         \
 206         } while (0)
 207
 208 #else /* !CONFIG_PM_SLEEP */
 209
 210 static inline int device_suspend(pm_message_t state)
 211 {
 212         return 0;
 213 }
 214
 215 #define suspend_report_result(fn, ret)          do {} while (0)
 216
 217 #endif /* !CONFIG_PM_SLEEP */
 218
 219 /*
 220  * Global Power Management flags
 221  * Used to keep APM and ACPI from both being active
 222  */
 223 extern unsigned int     pm_flags;
 224
 225 #define PM_APM  1
 226 #define PM_ACPI 2
 227
 228 #endif /* __KERNEL__ */
 229
 230 #endif /* _LINUX_PM_H */