usb: musb: Fix compile error for omaps for musb_hdrc
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / usb / musb / musb_core.h
blobcd9f4a9a06c6408288a861727790eae9776870ff
1 /*
2 * MUSB OTG driver defines
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #ifndef __MUSB_CORE_H__
36 #define __MUSB_CORE_H__
38 #include <linux/slab.h>
39 #include <linux/list.h>
40 #include <linux/interrupt.h>
41 #include <linux/errno.h>
42 #include <linux/timer.h>
43 #include <linux/clk.h>
44 #include <linux/device.h>
45 #include <linux/usb/ch9.h>
46 #include <linux/usb/gadget.h>
47 #include <linux/usb.h>
48 #include <linux/usb/otg.h>
49 #include <linux/usb/musb.h>
51 struct musb;
52 struct musb_hw_ep;
53 struct musb_ep;
55 /* Helper defines for struct musb->hwvers */
56 #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
57 #define MUSB_HWVERS_MINOR(x) (x & 0x3ff)
58 #define MUSB_HWVERS_RC 0x8000
59 #define MUSB_HWVERS_1300 0x52C
60 #define MUSB_HWVERS_1400 0x590
61 #define MUSB_HWVERS_1800 0x720
62 #define MUSB_HWVERS_1900 0x784
63 #define MUSB_HWVERS_2000 0x800
65 #include "musb_debug.h"
66 #include "musb_dma.h"
68 #include "musb_io.h"
69 #include "musb_regs.h"
71 #include "musb_gadget.h"
72 #include "../core/hcd.h"
73 #include "musb_host.h"
77 #ifdef CONFIG_USB_MUSB_OTG
79 #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST)
80 #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL)
81 #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG)
83 /* NOTE: otg and peripheral-only state machines start at B_IDLE.
84 * OTG or host-only go to A_IDLE when ID is sensed.
86 #define is_peripheral_active(m) (!(m)->is_host)
87 #define is_host_active(m) ((m)->is_host)
89 #else
90 #define is_peripheral_enabled(musb) is_peripheral_capable()
91 #define is_host_enabled(musb) is_host_capable()
92 #define is_otg_enabled(musb) 0
94 #define is_peripheral_active(musb) is_peripheral_capable()
95 #define is_host_active(musb) is_host_capable()
96 #endif
98 #if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
99 /* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
100 * override that choice selection (often USB_GADGET_DUMMY_HCD).
102 #ifndef CONFIG_USB_GADGET_MUSB_HDRC
103 #error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
104 #endif
105 #endif /* need MUSB gadget selection */
107 #ifndef CONFIG_HAVE_CLK
108 /* Dummy stub for clk framework */
109 #define clk_get(dev, id) NULL
110 #define clk_put(clock) do {} while (0)
111 #define clk_enable(clock) do {} while (0)
112 #define clk_disable(clock) do {} while (0)
113 #endif
115 #ifdef CONFIG_PROC_FS
116 #include <linux/fs.h>
117 #define MUSB_CONFIG_PROC_FS
118 #endif
120 /****************************** PERIPHERAL ROLE *****************************/
122 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
124 #define is_peripheral_capable() (1)
126 extern irqreturn_t musb_g_ep0_irq(struct musb *);
127 extern void musb_g_tx(struct musb *, u8);
128 extern void musb_g_rx(struct musb *, u8);
129 extern void musb_g_reset(struct musb *);
130 extern void musb_g_suspend(struct musb *);
131 extern void musb_g_resume(struct musb *);
132 extern void musb_g_wakeup(struct musb *);
133 extern void musb_g_disconnect(struct musb *);
135 #else
137 #define is_peripheral_capable() (0)
139 static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
140 static inline void musb_g_reset(struct musb *m) {}
141 static inline void musb_g_suspend(struct musb *m) {}
142 static inline void musb_g_resume(struct musb *m) {}
143 static inline void musb_g_wakeup(struct musb *m) {}
144 static inline void musb_g_disconnect(struct musb *m) {}
146 #endif
148 /****************************** HOST ROLE ***********************************/
150 #ifdef CONFIG_USB_MUSB_HDRC_HCD
152 #define is_host_capable() (1)
154 extern irqreturn_t musb_h_ep0_irq(struct musb *);
155 extern void musb_host_tx(struct musb *, u8);
156 extern void musb_host_rx(struct musb *, u8);
158 #else
160 #define is_host_capable() (0)
162 static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
163 static inline void musb_host_tx(struct musb *m, u8 e) {}
164 static inline void musb_host_rx(struct musb *m, u8 e) {}
166 #endif
169 /****************************** CONSTANTS ********************************/
171 #ifndef MUSB_C_NUM_EPS
172 #define MUSB_C_NUM_EPS ((u8)16)
173 #endif
175 #ifndef MUSB_MAX_END0_PACKET
176 #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
177 #endif
179 /* host side ep0 states */
180 enum musb_h_ep0_state {
181 MUSB_EP0_IDLE,
182 MUSB_EP0_START, /* expect ack of setup */
183 MUSB_EP0_IN, /* expect IN DATA */
184 MUSB_EP0_OUT, /* expect ack of OUT DATA */
185 MUSB_EP0_STATUS, /* expect ack of STATUS */
186 } __attribute__ ((packed));
188 /* peripheral side ep0 states */
189 enum musb_g_ep0_state {
190 MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
191 MUSB_EP0_STAGE_SETUP, /* received SETUP */
192 MUSB_EP0_STAGE_TX, /* IN data */
193 MUSB_EP0_STAGE_RX, /* OUT data */
194 MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
195 MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */
196 MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
197 } __attribute__ ((packed));
200 * OTG protocol constants. See USB OTG 1.3 spec,
201 * sections 5.5 "Device Timings" and 6.6.5 "Timers".
203 #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
204 #define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
205 #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
206 #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
209 /*************************** REGISTER ACCESS ********************************/
211 /* Endpoint registers (other than dynfifo setup) can be accessed either
212 * directly with the "flat" model, or after setting up an index register.
215 #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
216 || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN)
217 /* REVISIT indexed access seemed to
218 * misbehave (on DaVinci) for at least peripheral IN ...
220 #define MUSB_FLAT_REG
221 #endif
223 /* TUSB mapping: "flat" plus ep0 special cases */
224 #if defined(CONFIG_USB_TUSB6010)
225 #define musb_ep_select(_mbase, _epnum) \
226 musb_writeb((_mbase), MUSB_INDEX, (_epnum))
227 #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
229 /* "flat" mapping: each endpoint has its own i/o address */
230 #elif defined(MUSB_FLAT_REG)
231 #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum)))
232 #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET
234 /* "indexed" mapping: INDEX register controls register bank select */
235 #else
236 #define musb_ep_select(_mbase, _epnum) \
237 musb_writeb((_mbase), MUSB_INDEX, (_epnum))
238 #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET
239 #endif
241 /****************************** FUNCTIONS ********************************/
243 #define MUSB_HST_MODE(_musb)\
244 { (_musb)->is_host = true; }
245 #define MUSB_DEV_MODE(_musb) \
246 { (_musb)->is_host = false; }
248 #define test_devctl_hst_mode(_x) \
249 (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
251 #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
253 /******************************** TYPES *************************************/
256 * struct musb_hw_ep - endpoint hardware (bidirectional)
258 * Ordered slightly for better cacheline locality.
260 struct musb_hw_ep {
261 struct musb *musb;
262 void __iomem *fifo;
263 void __iomem *regs;
265 #ifdef CONFIG_USB_TUSB6010
266 void __iomem *conf;
267 #endif
269 /* index in musb->endpoints[] */
270 u8 epnum;
272 /* hardware configuration, possibly dynamic */
273 bool is_shared_fifo;
274 bool tx_double_buffered;
275 bool rx_double_buffered;
276 u16 max_packet_sz_tx;
277 u16 max_packet_sz_rx;
279 struct dma_channel *tx_channel;
280 struct dma_channel *rx_channel;
282 #ifdef CONFIG_USB_TUSB6010
283 /* TUSB has "asynchronous" and "synchronous" dma modes */
284 dma_addr_t fifo_async;
285 dma_addr_t fifo_sync;
286 void __iomem *fifo_sync_va;
287 #endif
289 #ifdef CONFIG_USB_MUSB_HDRC_HCD
290 void __iomem *target_regs;
292 /* currently scheduled peripheral endpoint */
293 struct musb_qh *in_qh;
294 struct musb_qh *out_qh;
296 u8 rx_reinit;
297 u8 tx_reinit;
298 #endif
300 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
301 /* peripheral side */
302 struct musb_ep ep_in; /* TX */
303 struct musb_ep ep_out; /* RX */
304 #endif
307 static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
309 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
310 return next_request(&hw_ep->ep_in);
311 #else
312 return NULL;
313 #endif
316 static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
318 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
319 return next_request(&hw_ep->ep_out);
320 #else
321 return NULL;
322 #endif
326 * struct musb - Driver instance data.
328 struct musb {
329 /* device lock */
330 spinlock_t lock;
331 struct clk *clock;
332 irqreturn_t (*isr)(int, void *);
333 struct work_struct irq_work;
334 u16 hwvers;
336 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
337 #define MUSB_PORT_STAT_RESUME (1 << 31)
339 u32 port1_status;
341 #ifdef CONFIG_USB_MUSB_HDRC_HCD
342 unsigned long rh_timer;
344 enum musb_h_ep0_state ep0_stage;
346 /* bulk traffic normally dedicates endpoint hardware, and each
347 * direction has its own ring of host side endpoints.
348 * we try to progress the transfer at the head of each endpoint's
349 * queue until it completes or NAKs too much; then we try the next
350 * endpoint.
352 struct musb_hw_ep *bulk_ep;
354 struct list_head control; /* of musb_qh */
355 struct list_head in_bulk; /* of musb_qh */
356 struct list_head out_bulk; /* of musb_qh */
358 struct timer_list otg_timer;
359 #endif
361 /* called with IRQs blocked; ON/nonzero implies starting a session,
362 * and waiting at least a_wait_vrise_tmout.
364 void (*board_set_vbus)(struct musb *, int is_on);
366 struct dma_controller *dma_controller;
368 struct device *controller;
369 void __iomem *ctrl_base;
370 void __iomem *mregs;
372 #ifdef CONFIG_USB_TUSB6010
373 dma_addr_t async;
374 dma_addr_t sync;
375 void __iomem *sync_va;
376 #endif
378 /* passed down from chip/board specific irq handlers */
379 u8 int_usb;
380 u16 int_rx;
381 u16 int_tx;
383 struct otg_transceiver *xceiv;
385 int nIrq;
386 unsigned irq_wake:1;
388 struct musb_hw_ep endpoints[MUSB_C_NUM_EPS];
389 #define control_ep endpoints
391 #define VBUSERR_RETRY_COUNT 3
392 u16 vbuserr_retry;
393 u16 epmask;
394 u8 nr_endpoints;
396 u8 board_mode; /* enum musb_mode */
397 int (*board_set_power)(int state);
399 int (*set_clock)(struct clk *clk, int is_active);
401 u8 min_power; /* vbus for periph, in mA/2 */
403 bool is_host;
405 int a_wait_bcon; /* VBUS timeout in msecs */
406 unsigned long idle_timeout; /* Next timeout in jiffies */
408 /* active means connected and not suspended */
409 unsigned is_active:1;
411 unsigned is_multipoint:1;
412 unsigned ignore_disconnect:1; /* during bus resets */
414 unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
415 unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
416 unsigned dyn_fifo:1; /* dynamic FIFO supported? */
418 unsigned bulk_split:1;
419 #define can_bulk_split(musb,type) \
420 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
422 unsigned bulk_combine:1;
423 #define can_bulk_combine(musb,type) \
424 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
426 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
427 /* is_suspended means USB B_PERIPHERAL suspend */
428 unsigned is_suspended:1;
430 /* may_wakeup means remote wakeup is enabled */
431 unsigned may_wakeup:1;
433 /* is_self_powered is reported in device status and the
434 * config descriptor. is_bus_powered means B_PERIPHERAL
435 * draws some VBUS current; both can be true.
437 unsigned is_self_powered:1;
438 unsigned is_bus_powered:1;
440 unsigned set_address:1;
441 unsigned test_mode:1;
442 unsigned softconnect:1;
444 u8 address;
445 u8 test_mode_nr;
446 u16 ackpend; /* ep0 */
447 enum musb_g_ep0_state ep0_state;
448 struct usb_gadget g; /* the gadget */
449 struct usb_gadget_driver *gadget_driver; /* its driver */
450 #endif
452 struct musb_hdrc_config *config;
454 #ifdef MUSB_CONFIG_PROC_FS
455 struct proc_dir_entry *proc_entry;
456 #endif
459 #ifdef CONFIG_PM
460 struct musb_csr_regs {
461 /* FIFO registers */
462 u16 txmaxp, txcsr, rxmaxp, rxcsr;
463 u16 rxfifoadd, txfifoadd;
464 u8 txtype, txinterval, rxtype, rxinterval;
465 u8 rxfifosz, txfifosz;
466 u8 txfunaddr, txhubaddr, txhubport;
467 u8 rxfunaddr, rxhubaddr, rxhubport;
470 struct musb_context_registers {
472 #ifdef CONFIG_PM
473 u32 otg_sysconfig, otg_forcestandby;
474 #endif
475 u8 power;
476 u16 intrtxe, intrrxe;
477 u8 intrusbe;
478 u16 frame;
479 u8 index, testmode;
481 u8 devctl, misc;
483 struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
486 #ifdef CONFIG_PM
487 extern void musb_platform_save_context(struct musb *musb,
488 struct musb_context_registers *musb_context);
489 extern void musb_platform_restore_context(struct musb *musb,
490 struct musb_context_registers *musb_context);
491 #else
492 #define musb_platform_save_context(m, x) do {} while (0)
493 #define musb_platform_restore_context(m, x) do {} while (0)
494 #endif
496 #endif
498 static inline void musb_set_vbus(struct musb *musb, int is_on)
500 musb->board_set_vbus(musb, is_on);
503 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
504 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
506 return container_of(g, struct musb, g);
508 #endif
510 #ifdef CONFIG_BLACKFIN
511 static inline int musb_read_fifosize(struct musb *musb,
512 struct musb_hw_ep *hw_ep, u8 epnum)
514 musb->nr_endpoints++;
515 musb->epmask |= (1 << epnum);
517 if (epnum < 5) {
518 hw_ep->max_packet_sz_tx = 128;
519 hw_ep->max_packet_sz_rx = 128;
520 } else {
521 hw_ep->max_packet_sz_tx = 1024;
522 hw_ep->max_packet_sz_rx = 1024;
524 hw_ep->is_shared_fifo = false;
526 return 0;
529 static inline void musb_configure_ep0(struct musb *musb)
531 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
532 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
533 musb->endpoints[0].is_shared_fifo = true;
536 #else
538 static inline int musb_read_fifosize(struct musb *musb,
539 struct musb_hw_ep *hw_ep, u8 epnum)
541 void *mbase = musb->mregs;
542 u8 reg = 0;
544 /* read from core using indexed model */
545 reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
546 /* 0's returned when no more endpoints */
547 if (!reg)
548 return -ENODEV;
550 musb->nr_endpoints++;
551 musb->epmask |= (1 << epnum);
553 hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
555 /* shared TX/RX FIFO? */
556 if ((reg & 0xf0) == 0xf0) {
557 hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
558 hw_ep->is_shared_fifo = true;
559 return 0;
560 } else {
561 hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
562 hw_ep->is_shared_fifo = false;
565 return 0;
568 static inline void musb_configure_ep0(struct musb *musb)
570 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
571 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
572 musb->endpoints[0].is_shared_fifo = true;
574 #endif /* CONFIG_BLACKFIN */
577 /***************************** Glue it together *****************************/
579 extern const char musb_driver_name[];
581 extern void musb_start(struct musb *musb);
582 extern void musb_stop(struct musb *musb);
584 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
585 extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
587 extern void musb_load_testpacket(struct musb *);
589 extern irqreturn_t musb_interrupt(struct musb *);
591 extern void musb_platform_enable(struct musb *musb);
592 extern void musb_platform_disable(struct musb *musb);
594 extern void musb_hnp_stop(struct musb *musb);
596 extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
598 #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
599 defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
600 extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
601 #else
602 #define musb_platform_try_idle(x, y) do {} while (0)
603 #endif
605 #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
606 extern int musb_platform_get_vbus_status(struct musb *musb);
607 #else
608 #define musb_platform_get_vbus_status(x) 0
609 #endif
611 extern int __init musb_platform_init(struct musb *musb);
612 extern int musb_platform_exit(struct musb *musb);
614 #endif /* __MUSB_CORE_H__ */