?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
tty: serial: imx: move del_timer_sync() to avoid potential deadlock
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / tty / serial / imx.c
blob0b7fed746b273fb5647f5f5b05fdd7a37f9c3d76
1 /*
2 * Driver for Motorola IMX serial ports
3 *
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
5 *
6 * Author: Sascha Hauer <sascha@saschahauer.de>
7 * Copyright (C) 2004 Pengutronix
8 *
9 * Copyright (C) 2009 emlix GmbH
10 * Author: Fabian Godehardt (added IrDA support for iMX)
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 *
26 * [29-Mar-2005] Mike Lee
27 * Added hardware handshake
28 */
29
30 #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
31 #define SUPPORT_SYSRQ
32 #endif
33
34 #include <linux/module.h>
35 #include <linux/ioport.h>
36 #include <linux/init.h>
37 #include <linux/console.h>
38 #include <linux/sysrq.h>
39 #include <linux/platform_device.h>
40 #include <linux/tty.h>
41 #include <linux/tty_flip.h>
42 #include <linux/serial_core.h>
43 #include <linux/serial.h>
44 #include <linux/clk.h>
45 #include <linux/delay.h>
46 #include <linux/rational.h>
47 #include <linux/slab.h>
48 #include <linux/of.h>
49 #include <linux/of_device.h>
50
51 #include <asm/io.h>
52 #include <asm/irq.h>
53 #include <mach/imx-uart.h>
54
55 /* Register definitions */
56 #define URXD0 0x0 /* Receiver Register */
57 #define URTX0 0x40 /* Transmitter Register */
58 #define UCR1 0x80 /* Control Register 1 */
59 #define UCR2 0x84 /* Control Register 2 */
60 #define UCR3 0x88 /* Control Register 3 */
61 #define UCR4 0x8c /* Control Register 4 */
62 #define UFCR 0x90 /* FIFO Control Register */
63 #define USR1 0x94 /* Status Register 1 */
64 #define USR2 0x98 /* Status Register 2 */
65 #define UESC 0x9c /* Escape Character Register */
66 #define UTIM 0xa0 /* Escape Timer Register */
67 #define UBIR 0xa4 /* BRM Incremental Register */
68 #define UBMR 0xa8 /* BRM Modulator Register */
69 #define UBRC 0xac /* Baud Rate Count Register */
70 #define IMX21_ONEMS 0xb0 /* One Millisecond register */
71 #define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
72 #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
73
74 /* UART Control Register Bit Fields.*/
75 #define URXD_CHARRDY (1<<15)
76 #define URXD_ERR (1<<14)
77 #define URXD_OVRRUN (1<<13)
78 #define URXD_FRMERR (1<<12)
79 #define URXD_BRK (1<<11)
80 #define URXD_PRERR (1<<10)
81 #define UCR1_ADEN (1<<15) /* Auto detect interrupt */
82 #define UCR1_ADBR (1<<14) /* Auto detect baud rate */
83 #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
84 #define UCR1_IDEN (1<<12) /* Idle condition interrupt */
85 #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
86 #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
87 #define UCR1_IREN (1<<7) /* Infrared interface enable */
88 #define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
89 #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
90 #define UCR1_SNDBRK (1<<4) /* Send break */
91 #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
92 #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
93 #define UCR1_DOZE (1<<1) /* Doze */
94 #define UCR1_UARTEN (1<<0) /* UART enabled */
95 #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
96 #define UCR2_IRTS (1<<14) /* Ignore RTS pin */
97 #define UCR2_CTSC (1<<13) /* CTS pin control */
98 #define UCR2_CTS (1<<12) /* Clear to send */
99 #define UCR2_ESCEN (1<<11) /* Escape enable */
100 #define UCR2_PREN (1<<8) /* Parity enable */
101 #define UCR2_PROE (1<<7) /* Parity odd/even */
102 #define UCR2_STPB (1<<6) /* Stop */
103 #define UCR2_WS (1<<5) /* Word size */
104 #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
105 #define UCR2_ATEN (1<<3) /* Aging Timer Enable */
106 #define UCR2_TXEN (1<<2) /* Transmitter enabled */
107 #define UCR2_RXEN (1<<1) /* Receiver enabled */
108 #define UCR2_SRST (1<<0) /* SW reset */
109 #define UCR3_DTREN (1<<13) /* DTR interrupt enable */
110 #define UCR3_PARERREN (1<<12) /* Parity enable */
111 #define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
112 #define UCR3_DSR (1<<10) /* Data set ready */
113 #define UCR3_DCD (1<<9) /* Data carrier detect */
114 #define UCR3_RI (1<<8) /* Ring indicator */
115 #define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
116 #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
117 #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
118 #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
119 #define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
120 #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
121 #define UCR3_BPEN (1<<0) /* Preset registers enable */
122 #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
123 #define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
124 #define UCR4_INVR (1<<9) /* Inverted infrared reception */
125 #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
126 #define UCR4_WKEN (1<<7) /* Wake interrupt enable */
127 #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
128 #define UCR4_IRSC (1<<5) /* IR special case */
129 #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
130 #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
131 #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
132 #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
133 #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
134 #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
135 #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
136 #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
137 #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
138 #define USR1_RTSS (1<<14) /* RTS pin status */
139 #define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
140 #define USR1_RTSD (1<<12) /* RTS delta */
141 #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
142 #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
143 #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
144 #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
145 #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
146 #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
147 #define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
148 #define USR2_ADET (1<<15) /* Auto baud rate detect complete */
149 #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
150 #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
151 #define USR2_IDLE (1<<12) /* Idle condition */
152 #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
153 #define USR2_WAKE (1<<7) /* Wake */
154 #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
155 #define USR2_TXDC (1<<3) /* Transmitter complete */
156 #define USR2_BRCD (1<<2) /* Break condition */
157 #define USR2_ORE (1<<1) /* Overrun error */
158 #define USR2_RDR (1<<0) /* Recv data ready */
159 #define UTS_FRCPERR (1<<13) /* Force parity error */
160 #define UTS_LOOP (1<<12) /* Loop tx and rx */
161 #define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
162 #define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
163 #define UTS_TXFULL (1<<4) /* TxFIFO full */
164 #define UTS_RXFULL (1<<3) /* RxFIFO full */
165 #define UTS_SOFTRST (1<<0) /* Software reset */
166
167 /* We've been assigned a range on the "Low-density serial ports" major */
168 #define SERIAL_IMX_MAJOR 207
169 #define MINOR_START 16
170 #define DEV_NAME "ttymxc"
171 #define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
172
173 /*
174 * This determines how often we check the modem status signals
175 * for any change. They generally aren't connected to an IRQ
176 * so we have to poll them. We also check immediately before
177 * filling the TX fifo incase CTS has been dropped.
178 */
179 #define MCTRL_TIMEOUT (250*HZ/1000)
180
181 #define DRIVER_NAME "IMX-uart"
182
183 #define UART_NR 8
184
185 /* i.mx21 type uart runs on all i.mx except i.mx1 */
186 enum imx_uart_type {
187 IMX1_UART,
188 IMX21_UART,
189 };
190
191 /* device type dependent stuff */
192 struct imx_uart_data {
193 unsigned uts_reg;
194 enum imx_uart_type devtype;
195 };
196
197 struct imx_port {
198 struct uart_port port;
199 struct timer_list timer;
200 unsigned int old_status;
201 int txirq,rxirq,rtsirq;
202 unsigned int have_rtscts:1;
203 unsigned int use_irda:1;
204 unsigned int irda_inv_rx:1;
205 unsigned int irda_inv_tx:1;
206 unsigned short trcv_delay; /* transceiver delay */
207 struct clk *clk;
208 struct imx_uart_data *devdata;
209 };
210
211 struct imx_port_ucrs {
212 unsigned int ucr1;
213 unsigned int ucr2;
214 unsigned int ucr3;
215 };
216
217 #ifdef CONFIG_IRDA
218 #define USE_IRDA(sport) ((sport)->use_irda)
219 #else
220 #define USE_IRDA(sport) (0)
221 #endif
222
223 static struct imx_uart_data imx_uart_devdata[] = {
224 [IMX1_UART] = {
225 .uts_reg = IMX1_UTS,
226 .devtype = IMX1_UART,
227 },
228 [IMX21_UART] = {
229 .uts_reg = IMX21_UTS,
230 .devtype = IMX21_UART,
231 },
232 };
233
234 static struct platform_device_id imx_uart_devtype[] = {
235 {
236 .name = "imx1-uart",
237 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
238 }, {
239 .name = "imx21-uart",
240 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
241 }, {
242 /* sentinel */
243 }
244 };
245 MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
246
247 static struct of_device_id imx_uart_dt_ids[] = {
248 { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
249 { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
250 { /* sentinel */ }
251 };
252 MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
253
254 static inline unsigned uts_reg(struct imx_port *sport)
255 {
256 return sport->devdata->uts_reg;
257 }
258
259 static inline int is_imx1_uart(struct imx_port *sport)
260 {
261 return sport->devdata->devtype == IMX1_UART;
262 }
263
264 static inline int is_imx21_uart(struct imx_port *sport)
265 {
266 return sport->devdata->devtype == IMX21_UART;
267 }
268
269 /*
270 * Save and restore functions for UCR1, UCR2 and UCR3 registers
271 */
272 static void imx_port_ucrs_save(struct uart_port *port,
273 struct imx_port_ucrs *ucr)
274 {
275 /* save control registers */
276 ucr->ucr1 = readl(port->membase + UCR1);
277 ucr->ucr2 = readl(port->membase + UCR2);
278 ucr->ucr3 = readl(port->membase + UCR3);
279 }
280
281 static void imx_port_ucrs_restore(struct uart_port *port,
282 struct imx_port_ucrs *ucr)
283 {
284 /* restore control registers */
285 writel(ucr->ucr1, port->membase + UCR1);
286 writel(ucr->ucr2, port->membase + UCR2);
287 writel(ucr->ucr3, port->membase + UCR3);
288 }
289
290 /*
291 * Handle any change of modem status signal since we were last called.
292 */
293 static void imx_mctrl_check(struct imx_port *sport)
294 {
295 unsigned int status, changed;
296
297 status = sport->port.ops->get_mctrl(&sport->port);
298 changed = status ^ sport->old_status;
299
300 if (changed == 0)
301 return;
302
303 sport->old_status = status;
304
305 if (changed & TIOCM_RI)
306 sport->port.icount.rng++;
307 if (changed & TIOCM_DSR)
308 sport->port.icount.dsr++;
309 if (changed & TIOCM_CAR)
310 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
311 if (changed & TIOCM_CTS)
312 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
313
314 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
315 }
316
317 /*
318 * This is our per-port timeout handler, for checking the
319 * modem status signals.
320 */
321 static void imx_timeout(unsigned long data)
322 {
323 struct imx_port *sport = (struct imx_port *)data;
324 unsigned long flags;
325
326 if (sport->port.state) {
327 spin_lock_irqsave(&sport->port.lock, flags);
328 imx_mctrl_check(sport);
329 spin_unlock_irqrestore(&sport->port.lock, flags);
330
331 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
332 }
333 }
334
335 /*
336 * interrupts disabled on entry
337 */
338 static void imx_stop_tx(struct uart_port *port)
339 {
340 struct imx_port *sport = (struct imx_port *)port;
341 unsigned long temp;
342
343 if (USE_IRDA(sport)) {
344 /* half duplex - wait for end of transmission */
345 int n = 256;
346 while ((--n > 0) &&
347 !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
348 udelay(5);
349 barrier();
350 }
351 /*
352 * irda transceiver - wait a bit more to avoid
353 * cutoff, hardware dependent
354 */
355 udelay(sport->trcv_delay);
356
357 /*
358 * half duplex - reactivate receive mode,
359 * flush receive pipe echo crap
360 */
361 if (readl(sport->port.membase + USR2) & USR2_TXDC) {
362 temp = readl(sport->port.membase + UCR1);
363 temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
364 writel(temp, sport->port.membase + UCR1);
365
366 temp = readl(sport->port.membase + UCR4);
367 temp &= ~(UCR4_TCEN);
368 writel(temp, sport->port.membase + UCR4);
369
370 while (readl(sport->port.membase + URXD0) &
371 URXD_CHARRDY)
372 barrier();
373
374 temp = readl(sport->port.membase + UCR1);
375 temp |= UCR1_RRDYEN;
376 writel(temp, sport->port.membase + UCR1);
377
378 temp = readl(sport->port.membase + UCR4);
379 temp |= UCR4_DREN;
380 writel(temp, sport->port.membase + UCR4);
381 }
382 return;
383 }
384
385 temp = readl(sport->port.membase + UCR1);
386 writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
387 }
388
389 /*
390 * interrupts disabled on entry
391 */
392 static void imx_stop_rx(struct uart_port *port)
393 {
394 struct imx_port *sport = (struct imx_port *)port;
395 unsigned long temp;
396
397 temp = readl(sport->port.membase + UCR2);
398 writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
399 }
400
401 /*
402 * Set the modem control timer to fire immediately.
403 */
404 static void imx_enable_ms(struct uart_port *port)
405 {
406 struct imx_port *sport = (struct imx_port *)port;
407
408 mod_timer(&sport->timer, jiffies);
409 }
410
411 static inline void imx_transmit_buffer(struct imx_port *sport)
412 {
413 struct circ_buf *xmit = &sport->port.state->xmit;
414
415 while (!uart_circ_empty(xmit) &&
416 !(readl(sport->port.membase + uts_reg(sport))
417 & UTS_TXFULL)) {
418 /* send xmit->buf[xmit->tail]
419 * out the port here */
420 writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
421 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
422 sport->port.icount.tx++;
423 }
424
425 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
426 uart_write_wakeup(&sport->port);
427
428 if (uart_circ_empty(xmit))
429 imx_stop_tx(&sport->port);
430 }
431
432 /*
433 * interrupts disabled on entry
434 */
435 static void imx_start_tx(struct uart_port *port)
436 {
437 struct imx_port *sport = (struct imx_port *)port;
438 unsigned long temp;
439
440 if (USE_IRDA(sport)) {
441 /* half duplex in IrDA mode; have to disable receive mode */
442 temp = readl(sport->port.membase + UCR4);
443 temp &= ~(UCR4_DREN);
444 writel(temp, sport->port.membase + UCR4);
445
446 temp = readl(sport->port.membase + UCR1);
447 temp &= ~(UCR1_RRDYEN);
448 writel(temp, sport->port.membase + UCR1);
449 }
450
451 temp = readl(sport->port.membase + UCR1);
452 writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
453
454 if (USE_IRDA(sport)) {
455 temp = readl(sport->port.membase + UCR1);
456 temp |= UCR1_TRDYEN;
457 writel(temp, sport->port.membase + UCR1);
458
459 temp = readl(sport->port.membase + UCR4);
460 temp |= UCR4_TCEN;
461 writel(temp, sport->port.membase + UCR4);
462 }
463
464 if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY)
465 imx_transmit_buffer(sport);
466 }
467
468 static irqreturn_t imx_rtsint(int irq, void *dev_id)
469 {
470 struct imx_port *sport = dev_id;
471 unsigned int val;
472 unsigned long flags;
473
474 spin_lock_irqsave(&sport->port.lock, flags);
475
476 writel(USR1_RTSD, sport->port.membase + USR1);
477 val = readl(sport->port.membase + USR1) & USR1_RTSS;
478 uart_handle_cts_change(&sport->port, !!val);
479 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
480
481 spin_unlock_irqrestore(&sport->port.lock, flags);
482 return IRQ_HANDLED;
483 }
484
485 static irqreturn_t imx_txint(int irq, void *dev_id)
486 {
487 struct imx_port *sport = dev_id;
488 struct circ_buf *xmit = &sport->port.state->xmit;
489 unsigned long flags;
490
491 spin_lock_irqsave(&sport->port.lock,flags);
492 if (sport->port.x_char)
493 {
494 /* Send next char */
495 writel(sport->port.x_char, sport->port.membase + URTX0);
496 goto out;
497 }
498
499 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
500 imx_stop_tx(&sport->port);
501 goto out;
502 }
503
504 imx_transmit_buffer(sport);
505
506 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
507 uart_write_wakeup(&sport->port);
508
509 out:
510 spin_unlock_irqrestore(&sport->port.lock,flags);
511 return IRQ_HANDLED;
512 }
513
514 static irqreturn_t imx_rxint(int irq, void *dev_id)
515 {
516 struct imx_port *sport = dev_id;
517 unsigned int rx,flg,ignored = 0;
518 struct tty_struct *tty = sport->port.state->port.tty;
519 unsigned long flags, temp;
520
521 spin_lock_irqsave(&sport->port.lock,flags);
522
523 while (readl(sport->port.membase + USR2) & USR2_RDR) {
524 flg = TTY_NORMAL;
525 sport->port.icount.rx++;
526
527 rx = readl(sport->port.membase + URXD0);
528
529 temp = readl(sport->port.membase + USR2);
530 if (temp & USR2_BRCD) {
531 writel(USR2_BRCD, sport->port.membase + USR2);
532 if (uart_handle_break(&sport->port))
533 continue;
534 }
535
536 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
537 continue;
538
539 if (unlikely(rx & URXD_ERR)) {
540 if (rx & URXD_BRK)
541 sport->port.icount.brk++;
542 else if (rx & URXD_PRERR)
543 sport->port.icount.parity++;
544 else if (rx & URXD_FRMERR)
545 sport->port.icount.frame++;
546 if (rx & URXD_OVRRUN)
547 sport->port.icount.overrun++;
548
549 if (rx & sport->port.ignore_status_mask) {
550 if (++ignored > 100)
551 goto out;
552 continue;
553 }
554
555 rx &= sport->port.read_status_mask;
556
557 if (rx & URXD_BRK)
558 flg = TTY_BREAK;
559 else if (rx & URXD_PRERR)
560 flg = TTY_PARITY;
561 else if (rx & URXD_FRMERR)
562 flg = TTY_FRAME;
563 if (rx & URXD_OVRRUN)
564 flg = TTY_OVERRUN;
565
566 #ifdef SUPPORT_SYSRQ
567 sport->port.sysrq = 0;
568 #endif
569 }
570
571 tty_insert_flip_char(tty, rx, flg);
572 }
573
574 out:
575 spin_unlock_irqrestore(&sport->port.lock,flags);
576 tty_flip_buffer_push(tty);
577 return IRQ_HANDLED;
578 }
579
580 static irqreturn_t imx_int(int irq, void *dev_id)
581 {
582 struct imx_port *sport = dev_id;
583 unsigned int sts;
584
585 sts = readl(sport->port.membase + USR1);
586
587 if (sts & USR1_RRDY)
588 imx_rxint(irq, dev_id);
589
590 if (sts & USR1_TRDY &&
591 readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
592 imx_txint(irq, dev_id);
593
594 if (sts & USR1_RTSD)
595 imx_rtsint(irq, dev_id);
596
597 if (sts & USR1_AWAKE)
598 writel(USR1_AWAKE, sport->port.membase + USR1);
599
600 return IRQ_HANDLED;
601 }
602
603 /*
604 * Return TIOCSER_TEMT when transmitter is not busy.
605 */
606 static unsigned int imx_tx_empty(struct uart_port *port)
607 {
608 struct imx_port *sport = (struct imx_port *)port;
609
610 return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
611 }
612
613 /*
614 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
615 */
616 static unsigned int imx_get_mctrl(struct uart_port *port)
617 {
618 struct imx_port *sport = (struct imx_port *)port;
619 unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
620
621 if (readl(sport->port.membase + USR1) & USR1_RTSS)
622 tmp |= TIOCM_CTS;
623
624 if (readl(sport->port.membase + UCR2) & UCR2_CTS)
625 tmp |= TIOCM_RTS;
626
627 return tmp;
628 }
629
630 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
631 {
632 struct imx_port *sport = (struct imx_port *)port;
633 unsigned long temp;
634
635 temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
636
637 if (mctrl & TIOCM_RTS)
638 temp |= UCR2_CTS;
639
640 writel(temp, sport->port.membase + UCR2);
641 }
642
643 /*
644 * Interrupts always disabled.
645 */
646 static void imx_break_ctl(struct uart_port *port, int break_state)
647 {
648 struct imx_port *sport = (struct imx_port *)port;
649 unsigned long flags, temp;
650
651 spin_lock_irqsave(&sport->port.lock, flags);
652
653 temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
654
655 if ( break_state != 0 )
656 temp |= UCR1_SNDBRK;
657
658 writel(temp, sport->port.membase + UCR1);
659
660 spin_unlock_irqrestore(&sport->port.lock, flags);
661 }
662
663 #define TXTL 2 /* reset default */
664 #define RXTL 1 /* reset default */
665
666 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
667 {
668 unsigned int val;
669 unsigned int ufcr_rfdiv;
670
671 /* set receiver / transmitter trigger level.
672 * RFDIV is set such way to satisfy requested uartclk value
673 */
674 val = TXTL << 10 | RXTL;
675 ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
676 / sport->port.uartclk;
677
678 if(!ufcr_rfdiv)
679 ufcr_rfdiv = 1;
680
681 val |= UFCR_RFDIV_REG(ufcr_rfdiv);
682
683 writel(val, sport->port.membase + UFCR);
684
685 return 0;
686 }
687
688 /* half the RX buffer size */
689 #define CTSTL 16
690
691 static int imx_startup(struct uart_port *port)
692 {
693 struct imx_port *sport = (struct imx_port *)port;
694 int retval;
695 unsigned long flags, temp;
696
697 imx_setup_ufcr(sport, 0);
698
699 /* disable the DREN bit (Data Ready interrupt enable) before
700 * requesting IRQs
701 */
702 temp = readl(sport->port.membase + UCR4);
703
704 if (USE_IRDA(sport))
705 temp |= UCR4_IRSC;
706
707 /* set the trigger level for CTS */
708 temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF);
709 temp |= CTSTL<< UCR4_CTSTL_SHF;
710
711 writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
712
713 if (USE_IRDA(sport)) {
714 /* reset fifo's and state machines */
715 int i = 100;
716 temp = readl(sport->port.membase + UCR2);
717 temp &= ~UCR2_SRST;
718 writel(temp, sport->port.membase + UCR2);
719 while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
720 (--i > 0)) {
721 udelay(1);
722 }
723 }
724
725 /*
726 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
727 * chips only have one interrupt.
728 */
729 if (sport->txirq > 0) {
730 retval = request_irq(sport->rxirq, imx_rxint, 0,
731 DRIVER_NAME, sport);
732 if (retval)
733 goto error_out1;
734
735 retval = request_irq(sport->txirq, imx_txint, 0,
736 DRIVER_NAME, sport);
737 if (retval)
738 goto error_out2;
739
740 /* do not use RTS IRQ on IrDA */
741 if (!USE_IRDA(sport)) {
742 retval = request_irq(sport->rtsirq, imx_rtsint,
743 (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
744 IRQF_TRIGGER_FALLING |
745 IRQF_TRIGGER_RISING,
746 DRIVER_NAME, sport);
747 if (retval)
748 goto error_out3;
749 }
750 } else {
751 retval = request_irq(sport->port.irq, imx_int, 0,
752 DRIVER_NAME, sport);
753 if (retval) {
754 free_irq(sport->port.irq, sport);
755 goto error_out1;
756 }
757 }
758
759 /*
760 * Finally, clear and enable interrupts
761 */
762 writel(USR1_RTSD, sport->port.membase + USR1);
763
764 temp = readl(sport->port.membase + UCR1);
765 temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
766
767 if (USE_IRDA(sport)) {
768 temp |= UCR1_IREN;
769 temp &= ~(UCR1_RTSDEN);
770 }
771
772 writel(temp, sport->port.membase + UCR1);
773
774 temp = readl(sport->port.membase + UCR2);
775 temp |= (UCR2_RXEN | UCR2_TXEN);
776 writel(temp, sport->port.membase + UCR2);
777
778 if (USE_IRDA(sport)) {
779 /* clear RX-FIFO */
780 int i = 64;
781 while ((--i > 0) &&
782 (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
783 barrier();
784 }
785 }
786
787 if (is_imx21_uart(sport)) {
788 temp = readl(sport->port.membase + UCR3);
789 temp |= IMX21_UCR3_RXDMUXSEL;
790 writel(temp, sport->port.membase + UCR3);
791 }
792
793 if (USE_IRDA(sport)) {
794 temp = readl(sport->port.membase + UCR4);
795 if (sport->irda_inv_rx)
796 temp |= UCR4_INVR;
797 else
798 temp &= ~(UCR4_INVR);
799 writel(temp | UCR4_DREN, sport->port.membase + UCR4);
800
801 temp = readl(sport->port.membase + UCR3);
802 if (sport->irda_inv_tx)
803 temp |= UCR3_INVT;
804 else
805 temp &= ~(UCR3_INVT);
806 writel(temp, sport->port.membase + UCR3);
807 }
808
809 /*
810 * Enable modem status interrupts
811 */
812 spin_lock_irqsave(&sport->port.lock,flags);
813 imx_enable_ms(&sport->port);
814 spin_unlock_irqrestore(&sport->port.lock,flags);
815
816 if (USE_IRDA(sport)) {
817 struct imxuart_platform_data *pdata;
818 pdata = sport->port.dev->platform_data;
819 sport->irda_inv_rx = pdata->irda_inv_rx;
820 sport->irda_inv_tx = pdata->irda_inv_tx;
821 sport->trcv_delay = pdata->transceiver_delay;
822 if (pdata->irda_enable)
823 pdata->irda_enable(1);
824 }
825
826 return 0;
827
828 error_out3:
829 if (sport->txirq)
830 free_irq(sport->txirq, sport);
831 error_out2:
832 if (sport->rxirq)
833 free_irq(sport->rxirq, sport);
834 error_out1:
835 return retval;
836 }
837
838 static void imx_shutdown(struct uart_port *port)
839 {
840 struct imx_port *sport = (struct imx_port *)port;
841 unsigned long temp;
842
843 temp = readl(sport->port.membase + UCR2);
844 temp &= ~(UCR2_TXEN);
845 writel(temp, sport->port.membase + UCR2);
846
847 if (USE_IRDA(sport)) {
848 struct imxuart_platform_data *pdata;
849 pdata = sport->port.dev->platform_data;
850 if (pdata->irda_enable)
851 pdata->irda_enable(0);
852 }
853
854 /*
855 * Stop our timer.
856 */
857 del_timer_sync(&sport->timer);
858
859 /*
860 * Free the interrupts
861 */
862 if (sport->txirq > 0) {
863 if (!USE_IRDA(sport))
864 free_irq(sport->rtsirq, sport);
865 free_irq(sport->txirq, sport);
866 free_irq(sport->rxirq, sport);
867 } else
868 free_irq(sport->port.irq, sport);
869
870 /*
871 * Disable all interrupts, port and break condition.
872 */
873
874 temp = readl(sport->port.membase + UCR1);
875 temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
876 if (USE_IRDA(sport))
877 temp &= ~(UCR1_IREN);
878
879 writel(temp, sport->port.membase + UCR1);
880 }
881
882 static void
883 imx_set_termios(struct uart_port *port, struct ktermios *termios,
884 struct ktermios *old)
885 {
886 struct imx_port *sport = (struct imx_port *)port;
887 unsigned long flags;
888 unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
889 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
890 unsigned int div, ufcr;
891 unsigned long num, denom;
892 uint64_t tdiv64;
893
894 /*
895 * If we don't support modem control lines, don't allow
896 * these to be set.
897 */
898 if (0) {
899 termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
900 termios->c_cflag |= CLOCAL;
901 }
902
903 /*
904 * We only support CS7 and CS8.
905 */
906 while ((termios->c_cflag & CSIZE) != CS7 &&
907 (termios->c_cflag & CSIZE) != CS8) {
908 termios->c_cflag &= ~CSIZE;
909 termios->c_cflag |= old_csize;
910 old_csize = CS8;
911 }
912
913 if ((termios->c_cflag & CSIZE) == CS8)
914 ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
915 else
916 ucr2 = UCR2_SRST | UCR2_IRTS;
917
918 if (termios->c_cflag & CRTSCTS) {
919 if( sport->have_rtscts ) {
920 ucr2 &= ~UCR2_IRTS;
921 ucr2 |= UCR2_CTSC;
922 } else {
923 termios->c_cflag &= ~CRTSCTS;
924 }
925 }
926
927 if (termios->c_cflag & CSTOPB)
928 ucr2 |= UCR2_STPB;
929 if (termios->c_cflag & PARENB) {
930 ucr2 |= UCR2_PREN;
931 if (termios->c_cflag & PARODD)
932 ucr2 |= UCR2_PROE;
933 }
934
935 del_timer_sync(&sport->timer);
936
937 /*
938 * Ask the core to calculate the divisor for us.
939 */
940 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
941 quot = uart_get_divisor(port, baud);
942
943 spin_lock_irqsave(&sport->port.lock, flags);
944
945 sport->port.read_status_mask = 0;
946 if (termios->c_iflag & INPCK)
947 sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
948 if (termios->c_iflag & (BRKINT | PARMRK))
949 sport->port.read_status_mask |= URXD_BRK;
950
951 /*
952 * Characters to ignore
953 */
954 sport->port.ignore_status_mask = 0;
955 if (termios->c_iflag & IGNPAR)
956 sport->port.ignore_status_mask |= URXD_PRERR;
957 if (termios->c_iflag & IGNBRK) {
958 sport->port.ignore_status_mask |= URXD_BRK;
959 /*
960 * If we're ignoring parity and break indicators,
961 * ignore overruns too (for real raw support).
962 */
963 if (termios->c_iflag & IGNPAR)
964 sport->port.ignore_status_mask |= URXD_OVRRUN;
965 }
966
967 /*
968 * Update the per-port timeout.
969 */
970 uart_update_timeout(port, termios->c_cflag, baud);
971
972 /*
973 * disable interrupts and drain transmitter
974 */
975 old_ucr1 = readl(sport->port.membase + UCR1);
976 writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
977 sport->port.membase + UCR1);
978
979 while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
980 barrier();
981
982 /* then, disable everything */
983 old_txrxen = readl(sport->port.membase + UCR2);
984 writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
985 sport->port.membase + UCR2);
986 old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
987
988 if (USE_IRDA(sport)) {
989 /*
990 * use maximum available submodule frequency to
991 * avoid missing short pulses due to low sampling rate
992 */
993 div = 1;
994 } else {
995 div = sport->port.uartclk / (baud * 16);
996 if (div > 7)
997 div = 7;
998 if (!div)
999 div = 1;
1000 }
1001
1002 rational_best_approximation(16 * div * baud, sport->port.uartclk,
1003 1 << 16, 1 << 16, &num, &denom);
1004
1005 tdiv64 = sport->port.uartclk;
1006 tdiv64 *= num;
1007 do_div(tdiv64, denom * 16 * div);
1008 tty_termios_encode_baud_rate(termios,
1009 (speed_t)tdiv64, (speed_t)tdiv64);
1010
1011 num -= 1;
1012 denom -= 1;
1013
1014 ufcr = readl(sport->port.membase + UFCR);
1015 ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
1016 writel(ufcr, sport->port.membase + UFCR);
1017
1018 writel(num, sport->port.membase + UBIR);
1019 writel(denom, sport->port.membase + UBMR);
1020
1021 if (is_imx21_uart(sport))
1022 writel(sport->port.uartclk / div / 1000,
1023 sport->port.membase + IMX21_ONEMS);
1024
1025 writel(old_ucr1, sport->port.membase + UCR1);
1026
1027 /* set the parity, stop bits and data size */
1028 writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
1029
1030 if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
1031 imx_enable_ms(&sport->port);
1032
1033 spin_unlock_irqrestore(&sport->port.lock, flags);
1034 }
1035
1036 static const char *imx_type(struct uart_port *port)
1037 {
1038 struct imx_port *sport = (struct imx_port *)port;
1039
1040 return sport->port.type == PORT_IMX ? "IMX" : NULL;
1041 }
1042
1043 /*
1044 * Release the memory region(s) being used by 'port'.
1045 */
1046 static void imx_release_port(struct uart_port *port)
1047 {
1048 struct platform_device *pdev = to_platform_device(port->dev);
1049 struct resource *mmres;
1050
1051 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1052 release_mem_region(mmres->start, resource_size(mmres));
1053 }
1054
1055 /*
1056 * Request the memory region(s) being used by 'port'.
1057 */
1058 static int imx_request_port(struct uart_port *port)
1059 {
1060 struct platform_device *pdev = to_platform_device(port->dev);
1061 struct resource *mmres;
1062 void *ret;
1063
1064 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1065 if (!mmres)
1066 return -ENODEV;
1067
1068 ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
1069
1070 return ret ? 0 : -EBUSY;
1071 }
1072
1073 /*
1074 * Configure/autoconfigure the port.
1075 */
1076 static void imx_config_port(struct uart_port *port, int flags)
1077 {
1078 struct imx_port *sport = (struct imx_port *)port;
1079
1080 if (flags & UART_CONFIG_TYPE &&
1081 imx_request_port(&sport->port) == 0)
1082 sport->port.type = PORT_IMX;
1083 }
1084
1085 /*
1086 * Verify the new serial_struct (for TIOCSSERIAL).
1087 * The only change we allow are to the flags and type, and
1088 * even then only between PORT_IMX and PORT_UNKNOWN
1089 */
1090 static int
1091 imx_verify_port(struct uart_port *port, struct serial_struct *ser)
1092 {
1093 struct imx_port *sport = (struct imx_port *)port;
1094 int ret = 0;
1095
1096 if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
1097 ret = -EINVAL;
1098 if (sport->port.irq != ser->irq)
1099 ret = -EINVAL;
1100 if (ser->io_type != UPIO_MEM)
1101 ret = -EINVAL;
1102 if (sport->port.uartclk / 16 != ser->baud_base)
1103 ret = -EINVAL;
1104 if ((void *)sport->port.mapbase != ser->iomem_base)
1105 ret = -EINVAL;
1106 if (sport->port.iobase != ser->port)
1107 ret = -EINVAL;
1108 if (ser->hub6 != 0)
1109 ret = -EINVAL;
1110 return ret;
1111 }
1112
1113 #if defined(CONFIG_CONSOLE_POLL)
1114 static int imx_poll_get_char(struct uart_port *port)
1115 {
1116 struct imx_port_ucrs old_ucr;
1117 unsigned int status;
1118 unsigned char c;
1119
1120 /* save control registers */
1121 imx_port_ucrs_save(port, &old_ucr);
1122
1123 /* disable interrupts */
1124 writel(UCR1_UARTEN, port->membase + UCR1);
1125 writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
1126 port->membase + UCR2);
1127 writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
1128 port->membase + UCR3);
1129
1130 /* poll */
1131 do {
1132 status = readl(port->membase + USR2);
1133 } while (~status & USR2_RDR);
1134
1135 /* read */
1136 c = readl(port->membase + URXD0);
1137
1138 /* restore control registers */
1139 imx_port_ucrs_restore(port, &old_ucr);
1140
1141 return c;
1142 }
1143
1144 static void imx_poll_put_char(struct uart_port *port, unsigned char c)
1145 {
1146 struct imx_port_ucrs old_ucr;
1147 unsigned int status;
1148
1149 /* save control registers */
1150 imx_port_ucrs_save(port, &old_ucr);
1151
1152 /* disable interrupts */
1153 writel(UCR1_UARTEN, port->membase + UCR1);
1154 writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
1155 port->membase + UCR2);
1156 writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
1157 port->membase + UCR3);
1158
1159 /* drain */
1160 do {
1161 status = readl(port->membase + USR1);
1162 } while (~status & USR1_TRDY);
1163
1164 /* write */
1165 writel(c, port->membase + URTX0);
1166
1167 /* flush */
1168 do {
1169 status = readl(port->membase + USR2);
1170 } while (~status & USR2_TXDC);
1171
1172 /* restore control registers */
1173 imx_port_ucrs_restore(port, &old_ucr);
1174 }
1175 #endif
1176
1177 static struct uart_ops imx_pops = {
1178 .tx_empty = imx_tx_empty,
1179 .set_mctrl = imx_set_mctrl,
1180 .get_mctrl = imx_get_mctrl,
1181 .stop_tx = imx_stop_tx,
1182 .start_tx = imx_start_tx,
1183 .stop_rx = imx_stop_rx,
1184 .enable_ms = imx_enable_ms,
1185 .break_ctl = imx_break_ctl,
1186 .startup = imx_startup,
1187 .shutdown = imx_shutdown,
1188 .set_termios = imx_set_termios,
1189 .type = imx_type,
1190 .release_port = imx_release_port,
1191 .request_port = imx_request_port,
1192 .config_port = imx_config_port,
1193 .verify_port = imx_verify_port,
1194 #if defined(CONFIG_CONSOLE_POLL)
1195 .poll_get_char = imx_poll_get_char,
1196 .poll_put_char = imx_poll_put_char,
1197 #endif
1198 };
1199
1200 static struct imx_port *imx_ports[UART_NR];
1201
1202 #ifdef CONFIG_SERIAL_IMX_CONSOLE
1203 static void imx_console_putchar(struct uart_port *port, int ch)
1204 {
1205 struct imx_port *sport = (struct imx_port *)port;
1206
1207 while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)
1208 barrier();
1209
1210 writel(ch, sport->port.membase + URTX0);
1211 }
1212
1213 /*
1214 * Interrupts are disabled on entering
1215 */
1216 static void
1217 imx_console_write(struct console *co, const char *s, unsigned int count)
1218 {
1219 struct imx_port *sport = imx_ports[co->index];
1220 struct imx_port_ucrs old_ucr;
1221 unsigned int ucr1;
1222
1223 /*
1224 * First, save UCR1/2/3 and then disable interrupts
1225 */
1226 imx_port_ucrs_save(&sport->port, &old_ucr);
1227 ucr1 = old_ucr.ucr1;
1228
1229 if (is_imx1_uart(sport))
1230 ucr1 |= IMX1_UCR1_UARTCLKEN;
1231 ucr1 |= UCR1_UARTEN;
1232 ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
1233
1234 writel(ucr1, sport->port.membase + UCR1);
1235
1236 writel(old_ucr.ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
1237
1238 uart_console_write(&sport->port, s, count, imx_console_putchar);
1239
1240 /*
1241 * Finally, wait for transmitter to become empty
1242 * and restore UCR1/2/3
1243 */
1244 while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
1245
1246 imx_port_ucrs_restore(&sport->port, &old_ucr);
1247 }
1248
1249 /*
1250 * If the port was already initialised (eg, by a boot loader),
1251 * try to determine the current setup.
1252 */
1253 static void __init
1254 imx_console_get_options(struct imx_port *sport, int *baud,
1255 int *parity, int *bits)
1256 {
1257
1258 if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
1259 /* ok, the port was enabled */
1260 unsigned int ucr2, ubir,ubmr, uartclk;
1261 unsigned int baud_raw;
1262 unsigned int ucfr_rfdiv;
1263
1264 ucr2 = readl(sport->port.membase + UCR2);
1265
1266 *parity = 'n';
1267 if (ucr2 & UCR2_PREN) {
1268 if (ucr2 & UCR2_PROE)
1269 *parity = 'o';
1270 else
1271 *parity = 'e';
1272 }
1273
1274 if (ucr2 & UCR2_WS)
1275 *bits = 8;
1276 else
1277 *bits = 7;
1278
1279 ubir = readl(sport->port.membase + UBIR) & 0xffff;
1280 ubmr = readl(sport->port.membase + UBMR) & 0xffff;
1281
1282 ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
1283 if (ucfr_rfdiv == 6)
1284 ucfr_rfdiv = 7;
1285 else
1286 ucfr_rfdiv = 6 - ucfr_rfdiv;
1287
1288 uartclk = clk_get_rate(sport->clk);
1289 uartclk /= ucfr_rfdiv;
1290
1291 { /*
1292 * The next code provides exact computation of
1293 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
1294 * without need of float support or long long division,
1295 * which would be required to prevent 32bit arithmetic overflow
1296 */
1297 unsigned int mul = ubir + 1;
1298 unsigned int div = 16 * (ubmr + 1);
1299 unsigned int rem = uartclk % div;
1300
1301 baud_raw = (uartclk / div) * mul;
1302 baud_raw += (rem * mul + div / 2) / div;
1303 *baud = (baud_raw + 50) / 100 * 100;
1304 }
1305
1306 if(*baud != baud_raw)
1307 printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
1308 baud_raw, *baud);
1309 }
1310 }
1311
1312 static int __init
1313 imx_console_setup(struct console *co, char *options)
1314 {
1315 struct imx_port *sport;
1316 int baud = 9600;
1317 int bits = 8;
1318 int parity = 'n';
1319 int flow = 'n';
1320
1321 /*
1322 * Check whether an invalid uart number has been specified, and
1323 * if so, search for the first available port that does have
1324 * console support.
1325 */
1326 if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
1327 co->index = 0;
1328 sport = imx_ports[co->index];
1329 if(sport == NULL)
1330 return -ENODEV;
1331
1332 if (options)
1333 uart_parse_options(options, &baud, &parity, &bits, &flow);
1334 else
1335 imx_console_get_options(sport, &baud, &parity, &bits);
1336
1337 imx_setup_ufcr(sport, 0);
1338
1339 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
1340 }
1341
1342 static struct uart_driver imx_reg;
1343 static struct console imx_console = {
1344 .name = DEV_NAME,
1345 .write = imx_console_write,
1346 .device = uart_console_device,
1347 .setup = imx_console_setup,
1348 .flags = CON_PRINTBUFFER,
1349 .index = -1,
1350 .data = &imx_reg,
1351 };
1352
1353 #define IMX_CONSOLE &imx_console
1354 #else
1355 #define IMX_CONSOLE NULL
1356 #endif
1357
1358 static struct uart_driver imx_reg = {
1359 .owner = THIS_MODULE,
1360 .driver_name = DRIVER_NAME,
1361 .dev_name = DEV_NAME,
1362 .major = SERIAL_IMX_MAJOR,
1363 .minor = MINOR_START,
1364 .nr = ARRAY_SIZE(imx_ports),
1365 .cons = IMX_CONSOLE,
1366 };
1367
1368 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
1369 {
1370 struct imx_port *sport = platform_get_drvdata(dev);
1371 unsigned int val;
1372
1373 /* enable wakeup from i.MX UART */
1374 val = readl(sport->port.membase + UCR3);
1375 val |= UCR3_AWAKEN;
1376 writel(val, sport->port.membase + UCR3);
1377
1378 if (sport)
1379 uart_suspend_port(&imx_reg, &sport->port);
1380
1381 return 0;
1382 }
1383
1384 static int serial_imx_resume(struct platform_device *dev)
1385 {
1386 struct imx_port *sport = platform_get_drvdata(dev);
1387 unsigned int val;
1388
1389 /* disable wakeup from i.MX UART */
1390 val = readl(sport->port.membase + UCR3);
1391 val &= ~UCR3_AWAKEN;
1392 writel(val, sport->port.membase + UCR3);
1393
1394 if (sport)
1395 uart_resume_port(&imx_reg, &sport->port);
1396
1397 return 0;
1398 }
1399
1400 #ifdef CONFIG_OF
1401 /*
1402 * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
1403 * could successfully get all information from dt or a negative errno.
1404 */
1405 static int serial_imx_probe_dt(struct imx_port *sport,
1406 struct platform_device *pdev)
1407 {
1408 struct device_node *np = pdev->dev.of_node;
1409 const struct of_device_id *of_id =
1410 of_match_device(imx_uart_dt_ids, &pdev->dev);
1411 int ret;
1412
1413 if (!np)
1414 /* no device tree device */
1415 return 1;
1416
1417 ret = of_alias_get_id(np, "serial");
1418 if (ret < 0) {
1419 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
1420 return ret;
1421 }
1422 sport->port.line = ret;
1423
1424 if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
1425 sport->have_rtscts = 1;
1426
1427 if (of_get_property(np, "fsl,irda-mode", NULL))
1428 sport->use_irda = 1;
1429
1430 sport->devdata = of_id->data;
1431
1432 return 0;
1433 }
1434 #else
1435 static inline int serial_imx_probe_dt(struct imx_port *sport,
1436 struct platform_device *pdev)
1437 {
1438 return 1;
1439 }
1440 #endif
1441
1442 static void serial_imx_probe_pdata(struct imx_port *sport,
1443 struct platform_device *pdev)
1444 {
1445 struct imxuart_platform_data *pdata = pdev->dev.platform_data;
1446
1447 sport->port.line = pdev->id;
1448 sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
1449
1450 if (!pdata)
1451 return;
1452
1453 if (pdata->flags & IMXUART_HAVE_RTSCTS)
1454 sport->have_rtscts = 1;
1455
1456 if (pdata->flags & IMXUART_IRDA)
1457 sport->use_irda = 1;
1458 }
1459
1460 static int serial_imx_probe(struct platform_device *pdev)
1461 {
1462 struct imx_port *sport;
1463 struct imxuart_platform_data *pdata;
1464 void __iomem *base;
1465 int ret = 0;
1466 struct resource *res;
1467
1468 sport = kzalloc(sizeof(*sport), GFP_KERNEL);
1469 if (!sport)
1470 return -ENOMEM;
1471
1472 ret = serial_imx_probe_dt(sport, pdev);
1473 if (ret > 0)
1474 serial_imx_probe_pdata(sport, pdev);
1475 else if (ret < 0)
1476 goto free;
1477
1478 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1479 if (!res) {
1480 ret = -ENODEV;
1481 goto free;
1482 }
1483
1484 base = ioremap(res->start, PAGE_SIZE);
1485 if (!base) {
1486 ret = -ENOMEM;
1487 goto free;
1488 }
1489
1490 sport->port.dev = &pdev->dev;
1491 sport->port.mapbase = res->start;
1492 sport->port.membase = base;
1493 sport->port.type = PORT_IMX,
1494 sport->port.iotype = UPIO_MEM;
1495 sport->port.irq = platform_get_irq(pdev, 0);
1496 sport->rxirq = platform_get_irq(pdev, 0);
1497 sport->txirq = platform_get_irq(pdev, 1);
1498 sport->rtsirq = platform_get_irq(pdev, 2);
1499 sport->port.fifosize = 32;
1500 sport->port.ops = &imx_pops;
1501 sport->port.flags = UPF_BOOT_AUTOCONF;
1502 init_timer(&sport->timer);
1503 sport->timer.function = imx_timeout;
1504 sport->timer.data = (unsigned long)sport;
1505
1506 sport->clk = clk_get(&pdev->dev, "uart");
1507 if (IS_ERR(sport->clk)) {
1508 ret = PTR_ERR(sport->clk);
1509 goto unmap;
1510 }
1511 clk_enable(sport->clk);
1512
1513 sport->port.uartclk = clk_get_rate(sport->clk);
1514
1515 imx_ports[sport->port.line] = sport;
1516
1517 pdata = pdev->dev.platform_data;
1518 if (pdata && pdata->init) {
1519 ret = pdata->init(pdev);
1520 if (ret)
1521 goto clkput;
1522 }
1523
1524 ret = uart_add_one_port(&imx_reg, &sport->port);
1525 if (ret)
1526 goto deinit;
1527 platform_set_drvdata(pdev, &sport->port);
1528
1529 return 0;
1530 deinit:
1531 if (pdata && pdata->exit)
1532 pdata->exit(pdev);
1533 clkput:
1534 clk_put(sport->clk);
1535 clk_disable(sport->clk);
1536 unmap:
1537 iounmap(sport->port.membase);
1538 free:
1539 kfree(sport);
1540
1541 return ret;
1542 }
1543
1544 static int serial_imx_remove(struct platform_device *pdev)
1545 {
1546 struct imxuart_platform_data *pdata;
1547 struct imx_port *sport = platform_get_drvdata(pdev);
1548
1549 pdata = pdev->dev.platform_data;
1550
1551 platform_set_drvdata(pdev, NULL);
1552
1553 if (sport) {
1554 uart_remove_one_port(&imx_reg, &sport->port);
1555 clk_put(sport->clk);
1556 }
1557
1558 clk_disable(sport->clk);
1559
1560 if (pdata && pdata->exit)
1561 pdata->exit(pdev);
1562
1563 iounmap(sport->port.membase);
1564 kfree(sport);
1565
1566 return 0;
1567 }
1568
1569 static struct platform_driver serial_imx_driver = {
1570 .probe = serial_imx_probe,
1571 .remove = serial_imx_remove,
1572
1573 .suspend = serial_imx_suspend,
1574 .resume = serial_imx_resume,
1575 .id_table = imx_uart_devtype,
1576 .driver = {
1577 .name = "imx-uart",
1578 .owner = THIS_MODULE,
1579 .of_match_table = imx_uart_dt_ids,
1580 },
1581 };
1582
1583 static int __init imx_serial_init(void)
1584 {
1585 int ret;
1586
1587 printk(KERN_INFO "Serial: IMX driver\n");
1588
1589 ret = uart_register_driver(&imx_reg);
1590 if (ret)
1591 return ret;
1592
1593 ret = platform_driver_register(&serial_imx_driver);
1594 if (ret != 0)
1595 uart_unregister_driver(&imx_reg);
1596
1597 return ret;
1598 }
1599
1600 static void __exit imx_serial_exit(void)
1601 {
1602 platform_driver_unregister(&serial_imx_driver);
1603 uart_unregister_driver(&imx_reg);
1604 }
1605
1606 module_init(imx_serial_init);
1607 module_exit(imx_serial_exit);
1608
1609 MODULE_AUTHOR("Sascha Hauer");
1610 MODULE_DESCRIPTION("IMX generic serial port driver");
1611 MODULE_LICENSE("GPL");
1612 MODULE_ALIAS("platform:imx-uart");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree