2 * cypress.h: Cypress module specific definitions and defines.
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
7 #ifndef _SPARC_CYPRESS_H
8 #define _SPARC_CYPRESS_H
10 /* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
12 /* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
14 * ---------------------------------------------------------------
15 * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
16 * ---------------------------------------------------------------
17 * 31 24 23-22 21-20 19 18-15 14 13 12 11 10 9 8 7-2 1 0
19 * MCA: MultiChip Access -- Used for configuration of multiple
20 * CY7C604/605 cache units.
21 * MCM: MultiChip Mask -- Again, for multiple cache unit config.
22 * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
23 * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
24 * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
25 * C: Cacheable -- Indicates whether accesses are cacheable while
26 * the MMU is off. 0=no 1=yes
27 * MR: MemoryReflection -- Indicates whether the bus attached to the
28 * MBus supports memory reflection. 0=no 1=yes (605 only)
29 * CM: CacheMode -- Indicates whether the cache is operating in write
30 * through or copy-back mode. 0=write-through 1=copy-back
31 * CL: CacheLock -- Indicates if the entire cache is locked or not.
32 * 0=not-locked 1=locked (604 only)
33 * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
34 * NF: NoFault -- Do faults generate traps? 0=yes 1=no
35 * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
38 #define CYPRESS_MCA 0x00c00000
39 #define CYPRESS_MCM 0x00300000
40 #define CYPRESS_MVALID 0x00080000
41 #define CYPRESS_MIDMASK 0x00078000 /* Only on 605 */
42 #define CYPRESS_BMODE 0x00004000
43 #define CYPRESS_ACENABLE 0x00002000
44 #define CYPRESS_MRFLCT 0x00000800 /* Only on 605 */
45 #define CYPRESS_CMODE 0x00000400
46 #define CYPRESS_CLOCK 0x00000200 /* Only on 604 */
47 #define CYPRESS_CENABLE 0x00000100
48 #define CYPRESS_NFAULT 0x00000002
49 #define CYPRESS_MENABLE 0x00000001
51 static inline void cypress_flush_page(unsigned long page
)
53 __asm__
__volatile__("sta %%g0, [%0] %1\n\t" : :
54 "r" (page
), "i" (ASI_M_FLUSH_PAGE
));
57 static inline void cypress_flush_segment(unsigned long addr
)
59 __asm__
__volatile__("sta %%g0, [%0] %1\n\t" : :
60 "r" (addr
), "i" (ASI_M_FLUSH_SEG
));
63 static inline void cypress_flush_region(unsigned long addr
)
65 __asm__
__volatile__("sta %%g0, [%0] %1\n\t" : :
66 "r" (addr
), "i" (ASI_M_FLUSH_REGION
));
69 static inline void cypress_flush_context(void)
71 __asm__
__volatile__("sta %%g0, [%%g0] %0\n\t" : :
72 "i" (ASI_M_FLUSH_CTX
));
75 /* XXX Displacement flushes for buggy chips and initial testing
79 #endif /* !(_SPARC_CYPRESS_H) */