[CIFS] remove checkpatch warning
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / net / ipv4 / arp.c
blobf11931c1838176de514d5e70666ebeef180e7183
1 /* linux/net/ipv4/arp.c
3 * Copyright (C) 1994 by Florian La Roche
5 * This module implements the Address Resolution Protocol ARP (RFC 826),
6 * which is used to convert IP addresses (or in the future maybe other
7 * high-level addresses) into a low-level hardware address (like an Ethernet
8 * address).
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
15 * Fixes:
16 * Alan Cox : Removed the Ethernet assumptions in
17 * Florian's code
18 * Alan Cox : Fixed some small errors in the ARP
19 * logic
20 * Alan Cox : Allow >4K in /proc
21 * Alan Cox : Make ARP add its own protocol entry
22 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
23 * Stephen Henson : Add AX25 support to arp_get_info()
24 * Alan Cox : Drop data when a device is downed.
25 * Alan Cox : Use init_timer().
26 * Alan Cox : Double lock fixes.
27 * Martin Seine : Move the arphdr structure
28 * to if_arp.h for compatibility.
29 * with BSD based programs.
30 * Andrew Tridgell : Added ARP netmask code and
31 * re-arranged proxy handling.
32 * Alan Cox : Changed to use notifiers.
33 * Niibe Yutaka : Reply for this device or proxies only.
34 * Alan Cox : Don't proxy across hardware types!
35 * Jonathan Naylor : Added support for NET/ROM.
36 * Mike Shaver : RFC1122 checks.
37 * Jonathan Naylor : Only lookup the hardware address for
38 * the correct hardware type.
39 * Germano Caronni : Assorted subtle races.
40 * Craig Schlenter : Don't modify permanent entry
41 * during arp_rcv.
42 * Russ Nelson : Tidied up a few bits.
43 * Alexey Kuznetsov: Major changes to caching and behaviour,
44 * eg intelligent arp probing and
45 * generation
46 * of host down events.
47 * Alan Cox : Missing unlock in device events.
48 * Eckes : ARP ioctl control errors.
49 * Alexey Kuznetsov: Arp free fix.
50 * Manuel Rodriguez: Gratuitous ARP.
51 * Jonathan Layes : Added arpd support through kerneld
52 * message queue (960314)
53 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
54 * Mike McLagan : Routing by source
55 * Stuart Cheshire : Metricom and grat arp fixes
56 * *** FOR 2.1 clean this up ***
57 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
58 * Alan Cox : Took the AP1000 nasty FDDI hack and
59 * folded into the mainstream FDDI code.
60 * Ack spit, Linus how did you allow that
61 * one in...
62 * Jes Sorensen : Make FDDI work again in 2.1.x and
63 * clean up the APFDDI & gen. FDDI bits.
64 * Alexey Kuznetsov: new arp state machine;
65 * now it is in net/core/neighbour.c.
66 * Krzysztof Halasa: Added Frame Relay ARP support.
67 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
68 * Shmulik Hen: Split arp_send to arp_create and
69 * arp_xmit so intermediate drivers like
70 * bonding can change the skb before
71 * sending (e.g. insert 8021q tag).
72 * Harald Welte : convert to make use of jenkins hash
75 #include <linux/module.h>
76 #include <linux/types.h>
77 #include <linux/string.h>
78 #include <linux/kernel.h>
79 #include <linux/capability.h>
80 #include <linux/socket.h>
81 #include <linux/sockios.h>
82 #include <linux/errno.h>
83 #include <linux/in.h>
84 #include <linux/mm.h>
85 #include <linux/inet.h>
86 #include <linux/inetdevice.h>
87 #include <linux/netdevice.h>
88 #include <linux/etherdevice.h>
89 #include <linux/fddidevice.h>
90 #include <linux/if_arp.h>
91 #include <linux/trdevice.h>
92 #include <linux/skbuff.h>
93 #include <linux/proc_fs.h>
94 #include <linux/seq_file.h>
95 #include <linux/stat.h>
96 #include <linux/init.h>
97 #include <linux/net.h>
98 #include <linux/rcupdate.h>
99 #include <linux/jhash.h>
100 #ifdef CONFIG_SYSCTL
101 #include <linux/sysctl.h>
102 #endif
104 #include <net/net_namespace.h>
105 #include <net/ip.h>
106 #include <net/icmp.h>
107 #include <net/route.h>
108 #include <net/protocol.h>
109 #include <net/tcp.h>
110 #include <net/sock.h>
111 #include <net/arp.h>
112 #include <net/ax25.h>
113 #include <net/netrom.h>
114 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
115 #include <net/atmclip.h>
116 struct neigh_table *clip_tbl_hook;
117 #endif
119 #include <asm/system.h>
120 #include <asm/uaccess.h>
122 #include <linux/netfilter_arp.h>
125 * Interface to generic neighbour cache.
127 static u32 arp_hash(const void *pkey, const struct net_device *dev);
128 static int arp_constructor(struct neighbour *neigh);
129 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
130 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
131 static void parp_redo(struct sk_buff *skb);
133 static struct neigh_ops arp_generic_ops = {
134 .family = AF_INET,
135 .solicit = arp_solicit,
136 .error_report = arp_error_report,
137 .output = neigh_resolve_output,
138 .connected_output = neigh_connected_output,
139 .hh_output = dev_queue_xmit,
140 .queue_xmit = dev_queue_xmit,
143 static struct neigh_ops arp_hh_ops = {
144 .family = AF_INET,
145 .solicit = arp_solicit,
146 .error_report = arp_error_report,
147 .output = neigh_resolve_output,
148 .connected_output = neigh_resolve_output,
149 .hh_output = dev_queue_xmit,
150 .queue_xmit = dev_queue_xmit,
153 static struct neigh_ops arp_direct_ops = {
154 .family = AF_INET,
155 .output = dev_queue_xmit,
156 .connected_output = dev_queue_xmit,
157 .hh_output = dev_queue_xmit,
158 .queue_xmit = dev_queue_xmit,
161 struct neigh_ops arp_broken_ops = {
162 .family = AF_INET,
163 .solicit = arp_solicit,
164 .error_report = arp_error_report,
165 .output = neigh_compat_output,
166 .connected_output = neigh_compat_output,
167 .hh_output = dev_queue_xmit,
168 .queue_xmit = dev_queue_xmit,
171 struct neigh_table arp_tbl = {
172 .family = AF_INET,
173 .entry_size = sizeof(struct neighbour) + 4,
174 .key_len = 4,
175 .hash = arp_hash,
176 .constructor = arp_constructor,
177 .proxy_redo = parp_redo,
178 .id = "arp_cache",
179 .parms = {
180 .tbl = &arp_tbl,
181 .base_reachable_time = 30 * HZ,
182 .retrans_time = 1 * HZ,
183 .gc_staletime = 60 * HZ,
184 .reachable_time = 30 * HZ,
185 .delay_probe_time = 5 * HZ,
186 .queue_len = 3,
187 .ucast_probes = 3,
188 .mcast_probes = 3,
189 .anycast_delay = 1 * HZ,
190 .proxy_delay = (8 * HZ) / 10,
191 .proxy_qlen = 64,
192 .locktime = 1 * HZ,
194 .gc_interval = 30 * HZ,
195 .gc_thresh1 = 128,
196 .gc_thresh2 = 512,
197 .gc_thresh3 = 1024,
200 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
202 switch (dev->type) {
203 case ARPHRD_ETHER:
204 case ARPHRD_FDDI:
205 case ARPHRD_IEEE802:
206 ip_eth_mc_map(addr, haddr);
207 return 0;
208 case ARPHRD_IEEE802_TR:
209 ip_tr_mc_map(addr, haddr);
210 return 0;
211 case ARPHRD_INFINIBAND:
212 ip_ib_mc_map(addr, dev->broadcast, haddr);
213 return 0;
214 default:
215 if (dir) {
216 memcpy(haddr, dev->broadcast, dev->addr_len);
217 return 0;
220 return -EINVAL;
224 static u32 arp_hash(const void *pkey, const struct net_device *dev)
226 return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
229 static int arp_constructor(struct neighbour *neigh)
231 __be32 addr = *(__be32*)neigh->primary_key;
232 struct net_device *dev = neigh->dev;
233 struct in_device *in_dev;
234 struct neigh_parms *parms;
236 rcu_read_lock();
237 in_dev = __in_dev_get_rcu(dev);
238 if (in_dev == NULL) {
239 rcu_read_unlock();
240 return -EINVAL;
243 neigh->type = inet_addr_type(dev_net(dev), addr);
245 parms = in_dev->arp_parms;
246 __neigh_parms_put(neigh->parms);
247 neigh->parms = neigh_parms_clone(parms);
248 rcu_read_unlock();
250 if (!dev->header_ops) {
251 neigh->nud_state = NUD_NOARP;
252 neigh->ops = &arp_direct_ops;
253 neigh->output = neigh->ops->queue_xmit;
254 } else {
255 /* Good devices (checked by reading texts, but only Ethernet is
256 tested)
258 ARPHRD_ETHER: (ethernet, apfddi)
259 ARPHRD_FDDI: (fddi)
260 ARPHRD_IEEE802: (tr)
261 ARPHRD_METRICOM: (strip)
262 ARPHRD_ARCNET:
263 etc. etc. etc.
265 ARPHRD_IPDDP will also work, if author repairs it.
266 I did not it, because this driver does not work even
267 in old paradigm.
270 #if 1
271 /* So... these "amateur" devices are hopeless.
272 The only thing, that I can say now:
273 It is very sad that we need to keep ugly obsolete
274 code to make them happy.
276 They should be moved to more reasonable state, now
277 they use rebuild_header INSTEAD OF hard_start_xmit!!!
278 Besides that, they are sort of out of date
279 (a lot of redundant clones/copies, useless in 2.1),
280 I wonder why people believe that they work.
282 switch (dev->type) {
283 default:
284 break;
285 case ARPHRD_ROSE:
286 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
287 case ARPHRD_AX25:
288 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
289 case ARPHRD_NETROM:
290 #endif
291 neigh->ops = &arp_broken_ops;
292 neigh->output = neigh->ops->output;
293 return 0;
294 #endif
296 #endif
297 if (neigh->type == RTN_MULTICAST) {
298 neigh->nud_state = NUD_NOARP;
299 arp_mc_map(addr, neigh->ha, dev, 1);
300 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
301 neigh->nud_state = NUD_NOARP;
302 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
303 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
304 neigh->nud_state = NUD_NOARP;
305 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
308 if (dev->header_ops->cache)
309 neigh->ops = &arp_hh_ops;
310 else
311 neigh->ops = &arp_generic_ops;
313 if (neigh->nud_state&NUD_VALID)
314 neigh->output = neigh->ops->connected_output;
315 else
316 neigh->output = neigh->ops->output;
318 return 0;
321 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
323 dst_link_failure(skb);
324 kfree_skb(skb);
327 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
329 __be32 saddr = 0;
330 u8 *dst_ha = NULL;
331 struct net_device *dev = neigh->dev;
332 __be32 target = *(__be32*)neigh->primary_key;
333 int probes = atomic_read(&neigh->probes);
334 struct in_device *in_dev = in_dev_get(dev);
336 if (!in_dev)
337 return;
339 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
340 default:
341 case 0: /* By default announce any local IP */
342 if (skb && inet_addr_type(dev_net(dev), ip_hdr(skb)->saddr) == RTN_LOCAL)
343 saddr = ip_hdr(skb)->saddr;
344 break;
345 case 1: /* Restrict announcements of saddr in same subnet */
346 if (!skb)
347 break;
348 saddr = ip_hdr(skb)->saddr;
349 if (inet_addr_type(dev_net(dev), saddr) == RTN_LOCAL) {
350 /* saddr should be known to target */
351 if (inet_addr_onlink(in_dev, target, saddr))
352 break;
354 saddr = 0;
355 break;
356 case 2: /* Avoid secondary IPs, get a primary/preferred one */
357 break;
360 if (in_dev)
361 in_dev_put(in_dev);
362 if (!saddr)
363 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
365 if ((probes -= neigh->parms->ucast_probes) < 0) {
366 if (!(neigh->nud_state&NUD_VALID))
367 printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
368 dst_ha = neigh->ha;
369 read_lock_bh(&neigh->lock);
370 } else if ((probes -= neigh->parms->app_probes) < 0) {
371 #ifdef CONFIG_ARPD
372 neigh_app_ns(neigh);
373 #endif
374 return;
377 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
378 dst_ha, dev->dev_addr, NULL);
379 if (dst_ha)
380 read_unlock_bh(&neigh->lock);
383 static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
385 int scope;
387 switch (IN_DEV_ARP_IGNORE(in_dev)) {
388 case 0: /* Reply, the tip is already validated */
389 return 0;
390 case 1: /* Reply only if tip is configured on the incoming interface */
391 sip = 0;
392 scope = RT_SCOPE_HOST;
393 break;
394 case 2: /*
395 * Reply only if tip is configured on the incoming interface
396 * and is in same subnet as sip
398 scope = RT_SCOPE_HOST;
399 break;
400 case 3: /* Do not reply for scope host addresses */
401 sip = 0;
402 scope = RT_SCOPE_LINK;
403 break;
404 case 4: /* Reserved */
405 case 5:
406 case 6:
407 case 7:
408 return 0;
409 case 8: /* Do not reply */
410 return 1;
411 default:
412 return 0;
414 return !inet_confirm_addr(in_dev, sip, tip, scope);
417 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
419 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
420 .saddr = tip } } };
421 struct rtable *rt;
422 int flag = 0;
423 /*unsigned long now; */
424 struct net *net = dev_net(dev);
426 if (ip_route_output_key(net, &rt, &fl) < 0)
427 return 1;
428 if (rt->u.dst.dev != dev) {
429 NET_INC_STATS_BH(net, LINUX_MIB_ARPFILTER);
430 flag = 1;
432 ip_rt_put(rt);
433 return flag;
436 /* OBSOLETE FUNCTIONS */
439 * Find an arp mapping in the cache. If not found, post a request.
441 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
442 * even if it exists. It is supposed that skb->dev was mangled
443 * by a virtual device (eql, shaper). Nobody but broken devices
444 * is allowed to use this function, it is scheduled to be removed. --ANK
447 static int arp_set_predefined(int addr_hint, unsigned char * haddr, __be32 paddr, struct net_device * dev)
449 switch (addr_hint) {
450 case RTN_LOCAL:
451 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
452 memcpy(haddr, dev->dev_addr, dev->addr_len);
453 return 1;
454 case RTN_MULTICAST:
455 arp_mc_map(paddr, haddr, dev, 1);
456 return 1;
457 case RTN_BROADCAST:
458 memcpy(haddr, dev->broadcast, dev->addr_len);
459 return 1;
461 return 0;
465 int arp_find(unsigned char *haddr, struct sk_buff *skb)
467 struct net_device *dev = skb->dev;
468 __be32 paddr;
469 struct neighbour *n;
471 if (!skb->dst) {
472 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
473 kfree_skb(skb);
474 return 1;
477 paddr = skb->rtable->rt_gateway;
479 if (arp_set_predefined(inet_addr_type(dev_net(dev), paddr), haddr, paddr, dev))
480 return 0;
482 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
484 if (n) {
485 n->used = jiffies;
486 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
487 read_lock_bh(&n->lock);
488 memcpy(haddr, n->ha, dev->addr_len);
489 read_unlock_bh(&n->lock);
490 neigh_release(n);
491 return 0;
493 neigh_release(n);
494 } else
495 kfree_skb(skb);
496 return 1;
499 /* END OF OBSOLETE FUNCTIONS */
501 int arp_bind_neighbour(struct dst_entry *dst)
503 struct net_device *dev = dst->dev;
504 struct neighbour *n = dst->neighbour;
506 if (dev == NULL)
507 return -EINVAL;
508 if (n == NULL) {
509 __be32 nexthop = ((struct rtable *)dst)->rt_gateway;
510 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
511 nexthop = 0;
512 n = __neigh_lookup_errno(
513 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
514 dev->type == ARPHRD_ATM ? clip_tbl_hook :
515 #endif
516 &arp_tbl, &nexthop, dev);
517 if (IS_ERR(n))
518 return PTR_ERR(n);
519 dst->neighbour = n;
521 return 0;
525 * Check if we can use proxy ARP for this path
528 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
530 struct in_device *out_dev;
531 int imi, omi = -1;
533 if (!IN_DEV_PROXY_ARP(in_dev))
534 return 0;
536 if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
537 return 1;
538 if (imi == -1)
539 return 0;
541 /* place to check for proxy_arp for routes */
543 if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
544 omi = IN_DEV_MEDIUM_ID(out_dev);
545 in_dev_put(out_dev);
547 return (omi != imi && omi != -1);
551 * Interface to link layer: send routine and receive handler.
555 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
556 * message.
558 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
559 struct net_device *dev, __be32 src_ip,
560 const unsigned char *dest_hw,
561 const unsigned char *src_hw,
562 const unsigned char *target_hw)
564 struct sk_buff *skb;
565 struct arphdr *arp;
566 unsigned char *arp_ptr;
569 * Allocate a buffer
572 skb = alloc_skb(arp_hdr_len(dev) + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
573 if (skb == NULL)
574 return NULL;
576 skb_reserve(skb, LL_RESERVED_SPACE(dev));
577 skb_reset_network_header(skb);
578 arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
579 skb->dev = dev;
580 skb->protocol = htons(ETH_P_ARP);
581 if (src_hw == NULL)
582 src_hw = dev->dev_addr;
583 if (dest_hw == NULL)
584 dest_hw = dev->broadcast;
587 * Fill the device header for the ARP frame
589 if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
590 goto out;
593 * Fill out the arp protocol part.
595 * The arp hardware type should match the device type, except for FDDI,
596 * which (according to RFC 1390) should always equal 1 (Ethernet).
599 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
600 * DIX code for the protocol. Make these device structure fields.
602 switch (dev->type) {
603 default:
604 arp->ar_hrd = htons(dev->type);
605 arp->ar_pro = htons(ETH_P_IP);
606 break;
608 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
609 case ARPHRD_AX25:
610 arp->ar_hrd = htons(ARPHRD_AX25);
611 arp->ar_pro = htons(AX25_P_IP);
612 break;
614 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
615 case ARPHRD_NETROM:
616 arp->ar_hrd = htons(ARPHRD_NETROM);
617 arp->ar_pro = htons(AX25_P_IP);
618 break;
619 #endif
620 #endif
622 #ifdef CONFIG_FDDI
623 case ARPHRD_FDDI:
624 arp->ar_hrd = htons(ARPHRD_ETHER);
625 arp->ar_pro = htons(ETH_P_IP);
626 break;
627 #endif
628 #ifdef CONFIG_TR
629 case ARPHRD_IEEE802_TR:
630 arp->ar_hrd = htons(ARPHRD_IEEE802);
631 arp->ar_pro = htons(ETH_P_IP);
632 break;
633 #endif
636 arp->ar_hln = dev->addr_len;
637 arp->ar_pln = 4;
638 arp->ar_op = htons(type);
640 arp_ptr=(unsigned char *)(arp+1);
642 memcpy(arp_ptr, src_hw, dev->addr_len);
643 arp_ptr += dev->addr_len;
644 memcpy(arp_ptr, &src_ip, 4);
645 arp_ptr += 4;
646 if (target_hw != NULL)
647 memcpy(arp_ptr, target_hw, dev->addr_len);
648 else
649 memset(arp_ptr, 0, dev->addr_len);
650 arp_ptr += dev->addr_len;
651 memcpy(arp_ptr, &dest_ip, 4);
653 return skb;
655 out:
656 kfree_skb(skb);
657 return NULL;
661 * Send an arp packet.
663 void arp_xmit(struct sk_buff *skb)
665 /* Send it off, maybe filter it using firewalling first. */
666 NF_HOOK(NFPROTO_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
670 * Create and send an arp packet.
672 void arp_send(int type, int ptype, __be32 dest_ip,
673 struct net_device *dev, __be32 src_ip,
674 const unsigned char *dest_hw, const unsigned char *src_hw,
675 const unsigned char *target_hw)
677 struct sk_buff *skb;
680 * No arp on this interface.
683 if (dev->flags&IFF_NOARP)
684 return;
686 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
687 dest_hw, src_hw, target_hw);
688 if (skb == NULL) {
689 return;
692 arp_xmit(skb);
696 * Process an arp request.
699 static int arp_process(struct sk_buff *skb)
701 struct net_device *dev = skb->dev;
702 struct in_device *in_dev = in_dev_get(dev);
703 struct arphdr *arp;
704 unsigned char *arp_ptr;
705 struct rtable *rt;
706 unsigned char *sha;
707 __be32 sip, tip;
708 u16 dev_type = dev->type;
709 int addr_type;
710 struct neighbour *n;
711 struct net *net = dev_net(dev);
713 /* arp_rcv below verifies the ARP header and verifies the device
714 * is ARP'able.
717 if (in_dev == NULL)
718 goto out;
720 arp = arp_hdr(skb);
722 switch (dev_type) {
723 default:
724 if (arp->ar_pro != htons(ETH_P_IP) ||
725 htons(dev_type) != arp->ar_hrd)
726 goto out;
727 break;
728 case ARPHRD_ETHER:
729 case ARPHRD_IEEE802_TR:
730 case ARPHRD_FDDI:
731 case ARPHRD_IEEE802:
733 * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
734 * devices, according to RFC 2625) devices will accept ARP
735 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
736 * This is the case also of FDDI, where the RFC 1390 says that
737 * FDDI devices should accept ARP hardware of (1) Ethernet,
738 * however, to be more robust, we'll accept both 1 (Ethernet)
739 * or 6 (IEEE 802.2)
741 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
742 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
743 arp->ar_pro != htons(ETH_P_IP))
744 goto out;
745 break;
746 case ARPHRD_AX25:
747 if (arp->ar_pro != htons(AX25_P_IP) ||
748 arp->ar_hrd != htons(ARPHRD_AX25))
749 goto out;
750 break;
751 case ARPHRD_NETROM:
752 if (arp->ar_pro != htons(AX25_P_IP) ||
753 arp->ar_hrd != htons(ARPHRD_NETROM))
754 goto out;
755 break;
758 /* Understand only these message types */
760 if (arp->ar_op != htons(ARPOP_REPLY) &&
761 arp->ar_op != htons(ARPOP_REQUEST))
762 goto out;
765 * Extract fields
767 arp_ptr= (unsigned char *)(arp+1);
768 sha = arp_ptr;
769 arp_ptr += dev->addr_len;
770 memcpy(&sip, arp_ptr, 4);
771 arp_ptr += 4;
772 arp_ptr += dev->addr_len;
773 memcpy(&tip, arp_ptr, 4);
775 * Check for bad requests for 127.x.x.x and requests for multicast
776 * addresses. If this is one such, delete it.
778 if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip))
779 goto out;
782 * Special case: We must set Frame Relay source Q.922 address
784 if (dev_type == ARPHRD_DLCI)
785 sha = dev->broadcast;
788 * Process entry. The idea here is we want to send a reply if it is a
789 * request for us or if it is a request for someone else that we hold
790 * a proxy for. We want to add an entry to our cache if it is a reply
791 * to us or if it is a request for our address.
792 * (The assumption for this last is that if someone is requesting our
793 * address, they are probably intending to talk to us, so it saves time
794 * if we cache their address. Their address is also probably not in
795 * our cache, since ours is not in their cache.)
797 * Putting this another way, we only care about replies if they are to
798 * us, in which case we add them to the cache. For requests, we care
799 * about those for us and those for our proxies. We reply to both,
800 * and in the case of requests for us we add the requester to the arp
801 * cache.
805 * Special case: IPv4 duplicate address detection packet (RFC2131)
806 * and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
808 if (sip == 0 || tip == sip) {
809 if (arp->ar_op == htons(ARPOP_REQUEST) &&
810 inet_addr_type(net, tip) == RTN_LOCAL &&
811 !arp_ignore(in_dev, sip, tip))
812 arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
813 dev->dev_addr, sha);
814 goto out;
817 if (arp->ar_op == htons(ARPOP_REQUEST) &&
818 ip_route_input(skb, tip, sip, 0, dev) == 0) {
820 rt = skb->rtable;
821 addr_type = rt->rt_type;
823 if (addr_type == RTN_LOCAL) {
824 int dont_send = 0;
826 if (!dont_send)
827 dont_send |= arp_ignore(in_dev,sip,tip);
828 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
829 dont_send |= arp_filter(sip,tip,dev);
830 if (!dont_send) {
831 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
832 if (n) {
833 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
834 neigh_release(n);
837 goto out;
838 } else if (IN_DEV_FORWARD(in_dev)) {
839 if (addr_type == RTN_UNICAST && rt->u.dst.dev != dev &&
840 (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, net, &tip, dev, 0))) {
841 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
842 if (n)
843 neigh_release(n);
845 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
846 skb->pkt_type == PACKET_HOST ||
847 in_dev->arp_parms->proxy_delay == 0) {
848 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
849 } else {
850 pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
851 in_dev_put(in_dev);
852 return 0;
854 goto out;
859 /* Update our ARP tables */
861 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
863 if (IPV4_DEVCONF_ALL(dev_net(dev), ARP_ACCEPT)) {
864 /* Unsolicited ARP is not accepted by default.
865 It is possible, that this option should be enabled for some
866 devices (strip is candidate)
868 if (n == NULL &&
869 arp->ar_op == htons(ARPOP_REPLY) &&
870 inet_addr_type(net, sip) == RTN_UNICAST)
871 n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
874 if (n) {
875 int state = NUD_REACHABLE;
876 int override;
878 /* If several different ARP replies follows back-to-back,
879 use the FIRST one. It is possible, if several proxy
880 agents are active. Taking the first reply prevents
881 arp trashing and chooses the fastest router.
883 override = time_after(jiffies, n->updated + n->parms->locktime);
885 /* Broadcast replies and request packets
886 do not assert neighbour reachability.
888 if (arp->ar_op != htons(ARPOP_REPLY) ||
889 skb->pkt_type != PACKET_HOST)
890 state = NUD_STALE;
891 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
892 neigh_release(n);
895 out:
896 if (in_dev)
897 in_dev_put(in_dev);
898 consume_skb(skb);
899 return 0;
902 static void parp_redo(struct sk_buff *skb)
904 arp_process(skb);
909 * Receive an arp request from the device layer.
912 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
913 struct packet_type *pt, struct net_device *orig_dev)
915 struct arphdr *arp;
917 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
918 if (!pskb_may_pull(skb, arp_hdr_len(dev)))
919 goto freeskb;
921 arp = arp_hdr(skb);
922 if (arp->ar_hln != dev->addr_len ||
923 dev->flags & IFF_NOARP ||
924 skb->pkt_type == PACKET_OTHERHOST ||
925 skb->pkt_type == PACKET_LOOPBACK ||
926 arp->ar_pln != 4)
927 goto freeskb;
929 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
930 goto out_of_mem;
932 memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
934 return NF_HOOK(NFPROTO_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
936 freeskb:
937 kfree_skb(skb);
938 out_of_mem:
939 return 0;
943 * User level interface (ioctl)
947 * Set (create) an ARP cache entry.
950 static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
952 if (dev == NULL) {
953 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
954 return 0;
956 if (__in_dev_get_rtnl(dev)) {
957 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
958 return 0;
960 return -ENXIO;
963 static int arp_req_set_public(struct net *net, struct arpreq *r,
964 struct net_device *dev)
966 __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
967 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
969 if (mask && mask != htonl(0xFFFFFFFF))
970 return -EINVAL;
971 if (!dev && (r->arp_flags & ATF_COM)) {
972 dev = dev_getbyhwaddr(net, r->arp_ha.sa_family,
973 r->arp_ha.sa_data);
974 if (!dev)
975 return -ENODEV;
977 if (mask) {
978 if (pneigh_lookup(&arp_tbl, net, &ip, dev, 1) == NULL)
979 return -ENOBUFS;
980 return 0;
983 return arp_req_set_proxy(net, dev, 1);
986 static int arp_req_set(struct net *net, struct arpreq *r,
987 struct net_device * dev)
989 __be32 ip;
990 struct neighbour *neigh;
991 int err;
993 if (r->arp_flags & ATF_PUBL)
994 return arp_req_set_public(net, r, dev);
996 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
997 if (r->arp_flags & ATF_PERM)
998 r->arp_flags |= ATF_COM;
999 if (dev == NULL) {
1000 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1001 .tos = RTO_ONLINK } } };
1002 struct rtable * rt;
1003 if ((err = ip_route_output_key(net, &rt, &fl)) != 0)
1004 return err;
1005 dev = rt->u.dst.dev;
1006 ip_rt_put(rt);
1007 if (!dev)
1008 return -EINVAL;
1010 switch (dev->type) {
1011 #ifdef CONFIG_FDDI
1012 case ARPHRD_FDDI:
1014 * According to RFC 1390, FDDI devices should accept ARP
1015 * hardware types of 1 (Ethernet). However, to be more
1016 * robust, we'll accept hardware types of either 1 (Ethernet)
1017 * or 6 (IEEE 802.2).
1019 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1020 r->arp_ha.sa_family != ARPHRD_ETHER &&
1021 r->arp_ha.sa_family != ARPHRD_IEEE802)
1022 return -EINVAL;
1023 break;
1024 #endif
1025 default:
1026 if (r->arp_ha.sa_family != dev->type)
1027 return -EINVAL;
1028 break;
1031 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1032 err = PTR_ERR(neigh);
1033 if (!IS_ERR(neigh)) {
1034 unsigned state = NUD_STALE;
1035 if (r->arp_flags & ATF_PERM)
1036 state = NUD_PERMANENT;
1037 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1038 r->arp_ha.sa_data : NULL, state,
1039 NEIGH_UPDATE_F_OVERRIDE|
1040 NEIGH_UPDATE_F_ADMIN);
1041 neigh_release(neigh);
1043 return err;
1046 static unsigned arp_state_to_flags(struct neighbour *neigh)
1048 unsigned flags = 0;
1049 if (neigh->nud_state&NUD_PERMANENT)
1050 flags = ATF_PERM|ATF_COM;
1051 else if (neigh->nud_state&NUD_VALID)
1052 flags = ATF_COM;
1053 return flags;
1057 * Get an ARP cache entry.
1060 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1062 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1063 struct neighbour *neigh;
1064 int err = -ENXIO;
1066 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1067 if (neigh) {
1068 read_lock_bh(&neigh->lock);
1069 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1070 r->arp_flags = arp_state_to_flags(neigh);
1071 read_unlock_bh(&neigh->lock);
1072 r->arp_ha.sa_family = dev->type;
1073 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1074 neigh_release(neigh);
1075 err = 0;
1077 return err;
1080 static int arp_req_delete_public(struct net *net, struct arpreq *r,
1081 struct net_device *dev)
1083 __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1084 __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1086 if (mask == htonl(0xFFFFFFFF))
1087 return pneigh_delete(&arp_tbl, net, &ip, dev);
1089 if (mask)
1090 return -EINVAL;
1092 return arp_req_set_proxy(net, dev, 0);
1095 static int arp_req_delete(struct net *net, struct arpreq *r,
1096 struct net_device * dev)
1098 int err;
1099 __be32 ip;
1100 struct neighbour *neigh;
1102 if (r->arp_flags & ATF_PUBL)
1103 return arp_req_delete_public(net, r, dev);
1105 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1106 if (dev == NULL) {
1107 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1108 .tos = RTO_ONLINK } } };
1109 struct rtable * rt;
1110 if ((err = ip_route_output_key(net, &rt, &fl)) != 0)
1111 return err;
1112 dev = rt->u.dst.dev;
1113 ip_rt_put(rt);
1114 if (!dev)
1115 return -EINVAL;
1117 err = -ENXIO;
1118 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1119 if (neigh) {
1120 if (neigh->nud_state&~NUD_NOARP)
1121 err = neigh_update(neigh, NULL, NUD_FAILED,
1122 NEIGH_UPDATE_F_OVERRIDE|
1123 NEIGH_UPDATE_F_ADMIN);
1124 neigh_release(neigh);
1126 return err;
1130 * Handle an ARP layer I/O control request.
1133 int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1135 int err;
1136 struct arpreq r;
1137 struct net_device *dev = NULL;
1139 switch (cmd) {
1140 case SIOCDARP:
1141 case SIOCSARP:
1142 if (!capable(CAP_NET_ADMIN))
1143 return -EPERM;
1144 case SIOCGARP:
1145 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1146 if (err)
1147 return -EFAULT;
1148 break;
1149 default:
1150 return -EINVAL;
1153 if (r.arp_pa.sa_family != AF_INET)
1154 return -EPFNOSUPPORT;
1156 if (!(r.arp_flags & ATF_PUBL) &&
1157 (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1158 return -EINVAL;
1159 if (!(r.arp_flags & ATF_NETMASK))
1160 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1161 htonl(0xFFFFFFFFUL);
1162 rtnl_lock();
1163 if (r.arp_dev[0]) {
1164 err = -ENODEV;
1165 if ((dev = __dev_get_by_name(net, r.arp_dev)) == NULL)
1166 goto out;
1168 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1169 if (!r.arp_ha.sa_family)
1170 r.arp_ha.sa_family = dev->type;
1171 err = -EINVAL;
1172 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1173 goto out;
1174 } else if (cmd == SIOCGARP) {
1175 err = -ENODEV;
1176 goto out;
1179 switch (cmd) {
1180 case SIOCDARP:
1181 err = arp_req_delete(net, &r, dev);
1182 break;
1183 case SIOCSARP:
1184 err = arp_req_set(net, &r, dev);
1185 break;
1186 case SIOCGARP:
1187 err = arp_req_get(&r, dev);
1188 if (!err && copy_to_user(arg, &r, sizeof(r)))
1189 err = -EFAULT;
1190 break;
1192 out:
1193 rtnl_unlock();
1194 return err;
1197 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1199 struct net_device *dev = ptr;
1201 switch (event) {
1202 case NETDEV_CHANGEADDR:
1203 neigh_changeaddr(&arp_tbl, dev);
1204 rt_cache_flush(dev_net(dev), 0);
1205 break;
1206 default:
1207 break;
1210 return NOTIFY_DONE;
1213 static struct notifier_block arp_netdev_notifier = {
1214 .notifier_call = arp_netdev_event,
1217 /* Note, that it is not on notifier chain.
1218 It is necessary, that this routine was called after route cache will be
1219 flushed.
1221 void arp_ifdown(struct net_device *dev)
1223 neigh_ifdown(&arp_tbl, dev);
1228 * Called once on startup.
1231 static struct packet_type arp_packet_type __read_mostly = {
1232 .type = cpu_to_be16(ETH_P_ARP),
1233 .func = arp_rcv,
1236 static int arp_proc_init(void);
1238 void __init arp_init(void)
1240 neigh_table_init(&arp_tbl);
1242 dev_add_pack(&arp_packet_type);
1243 arp_proc_init();
1244 #ifdef CONFIG_SYSCTL
1245 neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1246 NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1247 #endif
1248 register_netdevice_notifier(&arp_netdev_notifier);
1251 #ifdef CONFIG_PROC_FS
1252 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1254 /* ------------------------------------------------------------------------ */
1256 * ax25 -> ASCII conversion
1258 static char *ax2asc2(ax25_address *a, char *buf)
1260 char c, *s;
1261 int n;
1263 for (n = 0, s = buf; n < 6; n++) {
1264 c = (a->ax25_call[n] >> 1) & 0x7F;
1266 if (c != ' ') *s++ = c;
1269 *s++ = '-';
1271 if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1272 *s++ = '1';
1273 n -= 10;
1276 *s++ = n + '0';
1277 *s++ = '\0';
1279 if (*buf == '\0' || *buf == '-')
1280 return "*";
1282 return buf;
1285 #endif /* CONFIG_AX25 */
1287 #define HBUFFERLEN 30
1289 static void arp_format_neigh_entry(struct seq_file *seq,
1290 struct neighbour *n)
1292 char hbuffer[HBUFFERLEN];
1293 int k, j;
1294 char tbuf[16];
1295 struct net_device *dev = n->dev;
1296 int hatype = dev->type;
1298 read_lock(&n->lock);
1299 /* Convert hardware address to XX:XX:XX:XX ... form. */
1300 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1301 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1302 ax2asc2((ax25_address *)n->ha, hbuffer);
1303 else {
1304 #endif
1305 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1306 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1307 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1308 hbuffer[k++] = ':';
1310 hbuffer[--k] = 0;
1311 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1313 #endif
1314 sprintf(tbuf, "%pI4", n->primary_key);
1315 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1316 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1317 read_unlock(&n->lock);
1320 static void arp_format_pneigh_entry(struct seq_file *seq,
1321 struct pneigh_entry *n)
1323 struct net_device *dev = n->dev;
1324 int hatype = dev ? dev->type : 0;
1325 char tbuf[16];
1327 sprintf(tbuf, "%pI4", n->key);
1328 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1329 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1330 dev ? dev->name : "*");
1333 static int arp_seq_show(struct seq_file *seq, void *v)
1335 if (v == SEQ_START_TOKEN) {
1336 seq_puts(seq, "IP address HW type Flags "
1337 "HW address Mask Device\n");
1338 } else {
1339 struct neigh_seq_state *state = seq->private;
1341 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1342 arp_format_pneigh_entry(seq, v);
1343 else
1344 arp_format_neigh_entry(seq, v);
1347 return 0;
1350 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1352 /* Don't want to confuse "arp -a" w/ magic entries,
1353 * so we tell the generic iterator to skip NUD_NOARP.
1355 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1358 /* ------------------------------------------------------------------------ */
1360 static const struct seq_operations arp_seq_ops = {
1361 .start = arp_seq_start,
1362 .next = neigh_seq_next,
1363 .stop = neigh_seq_stop,
1364 .show = arp_seq_show,
1367 static int arp_seq_open(struct inode *inode, struct file *file)
1369 return seq_open_net(inode, file, &arp_seq_ops,
1370 sizeof(struct neigh_seq_state));
1373 static const struct file_operations arp_seq_fops = {
1374 .owner = THIS_MODULE,
1375 .open = arp_seq_open,
1376 .read = seq_read,
1377 .llseek = seq_lseek,
1378 .release = seq_release_net,
1382 static int __net_init arp_net_init(struct net *net)
1384 if (!proc_net_fops_create(net, "arp", S_IRUGO, &arp_seq_fops))
1385 return -ENOMEM;
1386 return 0;
1389 static void __net_exit arp_net_exit(struct net *net)
1391 proc_net_remove(net, "arp");
1394 static struct pernet_operations arp_net_ops = {
1395 .init = arp_net_init,
1396 .exit = arp_net_exit,
1399 static int __init arp_proc_init(void)
1401 return register_pernet_subsys(&arp_net_ops);
1404 #else /* CONFIG_PROC_FS */
1406 static int __init arp_proc_init(void)
1408 return 0;
1411 #endif /* CONFIG_PROC_FS */
1413 EXPORT_SYMBOL(arp_broken_ops);
1414 EXPORT_SYMBOL(arp_find);
1415 EXPORT_SYMBOL(arp_create);
1416 EXPORT_SYMBOL(arp_xmit);
1417 EXPORT_SYMBOL(arp_send);
1418 EXPORT_SYMBOL(arp_tbl);
1420 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1421 EXPORT_SYMBOL(clip_tbl_hook);
1422 #endif