2 * File: arch/blackfin/mach-bf537/boards/stamp.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/platform_device.h>
33 #include <linux/mtd/mtd.h>
34 #include <linux/mtd/partitions.h>
35 #include <linux/spi/spi.h>
36 #include <linux/spi/flash.h>
37 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
38 #include <linux/usb_isp1362.h>
40 #include <linux/irq.h>
42 #include <asm/bfin5xx_spi.h>
43 #include <asm/portmux.h>
44 #include <linux/usb/sl811.h>
46 #include <linux/spi/ad7877.h>
49 * Name the Board for the /proc/cpuinfo
51 const char bfin_board_name
[] = "PNAV-1.0";
54 * Driver needs to know address, irq and flag pin.
57 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
58 static struct resource bfin_pcmcia_cf_resources
[] = {
60 .start
= 0x20310000, /* IO PORT */
62 .flags
= IORESOURCE_MEM
,
64 .start
= 0x20311000, /* Attribute Memory */
66 .flags
= IORESOURCE_MEM
,
70 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWLEVEL
,
72 .start
= 6, /* Card Detect PF6 */
74 .flags
= IORESOURCE_IRQ
,
78 static struct platform_device bfin_pcmcia_cf_device
= {
79 .name
= "bfin_cf_pcmcia",
81 .num_resources
= ARRAY_SIZE(bfin_pcmcia_cf_resources
),
82 .resource
= bfin_pcmcia_cf_resources
,
86 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
87 static struct platform_device rtc_device
= {
93 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
94 static struct resource smc91x_resources
[] = {
96 .name
= "smc91x-regs",
98 .end
= 0x20300300 + 16,
99 .flags
= IORESOURCE_MEM
,
104 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
107 static struct platform_device smc91x_device
= {
110 .num_resources
= ARRAY_SIZE(smc91x_resources
),
111 .resource
= smc91x_resources
,
115 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
116 static struct resource sl811_hcd_resources
[] = {
120 .flags
= IORESOURCE_MEM
,
124 .flags
= IORESOURCE_MEM
,
126 .start
= CONFIG_USB_SL811_BFIN_IRQ
,
127 .end
= CONFIG_USB_SL811_BFIN_IRQ
,
128 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
132 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
133 void sl811_port_power(struct device
*dev
, int is_on
)
135 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS
, "usb:SL811_VBUS");
136 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS
);
139 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS
, 1);
141 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS
, 0);
145 static struct sl811_platform_data sl811_priv
= {
147 .power
= 250, /* == 500mA */
148 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
149 .port_power
= &sl811_port_power
,
153 static struct platform_device sl811_hcd_device
= {
157 .platform_data
= &sl811_priv
,
159 .num_resources
= ARRAY_SIZE(sl811_hcd_resources
),
160 .resource
= sl811_hcd_resources
,
164 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
165 static struct resource isp1362_hcd_resources
[] = {
169 .flags
= IORESOURCE_MEM
,
173 .flags
= IORESOURCE_MEM
,
175 .start
= CONFIG_USB_ISP1362_BFIN_GPIO_IRQ
,
176 .end
= CONFIG_USB_ISP1362_BFIN_GPIO_IRQ
,
177 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
181 static struct isp1362_platform_data isp1362_priv
= {
186 .int_edge_triggered
= 0,
187 .remote_wakeup_connected
= 0,
188 .no_power_switching
= 1,
189 .power_switching_mode
= 0,
192 static struct platform_device isp1362_hcd_device
= {
193 .name
= "isp1362-hcd",
196 .platform_data
= &isp1362_priv
,
198 .num_resources
= ARRAY_SIZE(isp1362_hcd_resources
),
199 .resource
= isp1362_hcd_resources
,
203 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
204 static struct platform_device bfin_mac_device
= {
209 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
210 static struct resource net2272_bfin_resources
[] = {
213 .end
= 0x20300000 + 0x100,
214 .flags
= IORESOURCE_MEM
,
218 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
222 static struct platform_device net2272_bfin_device
= {
225 .num_resources
= ARRAY_SIZE(net2272_bfin_resources
),
226 .resource
= net2272_bfin_resources
,
230 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
231 /* all SPI peripherals info goes here */
233 #if defined(CONFIG_MTD_M25P80) \
234 || defined(CONFIG_MTD_M25P80_MODULE)
235 static struct mtd_partition bfin_spi_flash_partitions
[] = {
237 .name
= "bootloader",
240 .mask_flags
= MTD_CAP_ROM
246 .name
= "file system",
248 .offset
= 0x00100000,
252 static struct flash_platform_data bfin_spi_flash_data
= {
254 .parts
= bfin_spi_flash_partitions
,
255 .nr_parts
= ARRAY_SIZE(bfin_spi_flash_partitions
),
259 /* SPI flash chip (m25p64) */
260 static struct bfin5xx_spi_chip spi_flash_chip_info
= {
261 .enable_dma
= 0, /* use dma transfer with this chip*/
266 #if defined(CONFIG_SPI_ADC_BF533) \
267 || defined(CONFIG_SPI_ADC_BF533_MODULE)
269 static struct bfin5xx_spi_chip spi_adc_chip_info
= {
270 .enable_dma
= 1, /* use dma transfer with this chip*/
275 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
276 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
277 static struct bfin5xx_spi_chip ad1836_spi_chip_info
= {
283 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
284 static struct bfin5xx_spi_chip ad9960_spi_chip_info
= {
290 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
291 static struct bfin5xx_spi_chip spi_mmc_chip_info
= {
297 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
298 static struct bfin5xx_spi_chip spi_ad7877_chip_info
= {
299 .cs_change_per_word
= 1,
304 static const struct ad7877_platform_data bfin_ad7877_ts_info
= {
306 .vref_delay_usecs
= 50, /* internal, no capacitor */
309 .pressure_max
= 1000,
311 .stopacq_polarity
= 1,
312 .first_conversion_delay
= 3,
313 .acquisition_time
= 1,
315 .pen_down_acc_interval
= 1,
319 static struct spi_board_info bfin_spi_board_info
[] __initdata
= {
320 #if defined(CONFIG_MTD_M25P80) \
321 || defined(CONFIG_MTD_M25P80_MODULE)
323 /* the modalias must be the same as spi device driver name */
324 .modalias
= "m25p80", /* Name of spi_driver for this device */
325 .max_speed_hz
= 25000000, /* max spi clock (SCK) speed in HZ */
326 .bus_num
= 0, /* Framework bus number */
327 .chip_select
= 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
328 .platform_data
= &bfin_spi_flash_data
,
329 .controller_data
= &spi_flash_chip_info
,
334 #if defined(CONFIG_SPI_ADC_BF533) \
335 || defined(CONFIG_SPI_ADC_BF533_MODULE)
337 .modalias
= "bfin_spi_adc", /* Name of spi_driver for this device */
338 .max_speed_hz
= 6250000, /* max spi clock (SCK) speed in HZ */
339 .bus_num
= 0, /* Framework bus number */
340 .chip_select
= 1, /* Framework chip select. */
341 .platform_data
= NULL
, /* No spi_driver specific config */
342 .controller_data
= &spi_adc_chip_info
,
346 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
347 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
349 .modalias
= "ad1836-spi",
350 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
352 .chip_select
= CONFIG_SND_BLACKFIN_SPI_PFBIT
,
353 .controller_data
= &ad1836_spi_chip_info
,
356 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
358 .modalias
= "ad9960-spi",
359 .max_speed_hz
= 10000000, /* max spi clock (SCK) speed in HZ */
362 .controller_data
= &ad9960_spi_chip_info
,
365 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
367 .modalias
= "spi_mmc_dummy",
368 .max_speed_hz
= 25000000, /* max spi clock (SCK) speed in HZ */
371 .platform_data
= NULL
,
372 .controller_data
= &spi_mmc_chip_info
,
376 .modalias
= "spi_mmc",
377 .max_speed_hz
= 25000000, /* max spi clock (SCK) speed in HZ */
379 .chip_select
= CONFIG_SPI_MMC_CS_CHAN
,
380 .platform_data
= NULL
,
381 .controller_data
= &spi_mmc_chip_info
,
385 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
387 .modalias
= "ad7877",
388 .platform_data
= &bfin_ad7877_ts_info
,
390 .max_speed_hz
= 12500000, /* max spi clock (SCK) speed in HZ */
393 .controller_data
= &spi_ad7877_chip_info
,
400 static struct resource bfin_spi0_resource
[] = {
402 .start
= SPI0_REGBASE
,
403 .end
= SPI0_REGBASE
+ 0xFF,
404 .flags
= IORESOURCE_MEM
,
409 .flags
= IORESOURCE_IRQ
,
413 /* SPI controller data */
414 static struct bfin5xx_spi_master bfin_spi0_info
= {
416 .enable_dma
= 1, /* master has the ability to do dma transfer */
417 .pin_req
= {P_SPI0_SCK
, P_SPI0_MISO
, P_SPI0_MOSI
, 0},
420 static struct platform_device bfin_spi0_device
= {
422 .id
= 0, /* Bus number */
423 .num_resources
= ARRAY_SIZE(bfin_spi0_resource
),
424 .resource
= bfin_spi0_resource
,
426 .platform_data
= &bfin_spi0_info
, /* Passed to driver */
429 #endif /* spi master and devices */
431 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
432 static struct platform_device bfin_fb_device
= {
433 .name
= "bf537-lq035",
437 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
438 static struct resource bfin_uart_resources
[] = {
442 .flags
= IORESOURCE_MEM
,
446 .flags
= IORESOURCE_MEM
,
450 static struct platform_device bfin_uart_device
= {
453 .num_resources
= ARRAY_SIZE(bfin_uart_resources
),
454 .resource
= bfin_uart_resources
,
459 static struct platform_device
*stamp_devices
[] __initdata
= {
460 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
461 &bfin_pcmcia_cf_device
,
464 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
468 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
472 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
476 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
480 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
484 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
485 &net2272_bfin_device
,
488 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
492 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
496 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
501 static int __init
stamp_init(void)
503 printk(KERN_INFO
"%s(): registering device resources\n", __FUNCTION__
);
504 platform_add_devices(stamp_devices
, ARRAY_SIZE(stamp_devices
));
505 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
506 spi_register_board_info(bfin_spi_board_info
,
507 ARRAY_SIZE(bfin_spi_board_info
));
512 arch_initcall(stamp_init
);
514 void bfin_get_ether_addr(char *addr
)
516 random_ether_addr(addr
);
517 printk(KERN_WARNING
"%s:%s: Setting Ethernet MAC to a random one\n", __FILE__
, __func__
);
519 EXPORT_SYMBOL(bfin_get_ether_addr
);