include/linux/kernel.h: Move logging bits to include/linux/printk.h
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / linux / printk.h
blobb772ca5fbdf013f541170b6b5f4adcd79ea41171
1 #ifndef __KERNEL_PRINTK__
2 #define __KERNEL_PRINTK__
4 extern const char linux_banner[];
5 extern const char linux_proc_banner[];
7 #define KERN_EMERG "<0>" /* system is unusable */
8 #define KERN_ALERT "<1>" /* action must be taken immediately */
9 #define KERN_CRIT "<2>" /* critical conditions */
10 #define KERN_ERR "<3>" /* error conditions */
11 #define KERN_WARNING "<4>" /* warning conditions */
12 #define KERN_NOTICE "<5>" /* normal but significant condition */
13 #define KERN_INFO "<6>" /* informational */
14 #define KERN_DEBUG "<7>" /* debug-level messages */
16 /* Use the default kernel loglevel */
17 #define KERN_DEFAULT "<d>"
19 * Annotation for a "continued" line of log printout (only done after a
20 * line that had no enclosing \n). Only to be used by core/arch code
21 * during early bootup (a continued line is not SMP-safe otherwise).
23 #define KERN_CONT "<c>"
25 extern int console_printk[];
27 #define console_loglevel (console_printk[0])
28 #define default_message_loglevel (console_printk[1])
29 #define minimum_console_loglevel (console_printk[2])
30 #define default_console_loglevel (console_printk[3])
32 struct va_format {
33 const char *fmt;
34 va_list *va;
38 * FW_BUG
39 * Add this to a message where you are sure the firmware is buggy or behaves
40 * really stupid or out of spec. Be aware that the responsible BIOS developer
41 * should be able to fix this issue or at least get a concrete idea of the
42 * problem by reading your message without the need of looking at the kernel
43 * code.
45 * Use it for definite and high priority BIOS bugs.
47 * FW_WARN
48 * Use it for not that clear (e.g. could the kernel messed up things already?)
49 * and medium priority BIOS bugs.
51 * FW_INFO
52 * Use this one if you want to tell the user or vendor about something
53 * suspicious, but generally harmless related to the firmware.
55 * Use it for information or very low priority BIOS bugs.
57 #define FW_BUG "[Firmware Bug]: "
58 #define FW_WARN "[Firmware Warn]: "
59 #define FW_INFO "[Firmware Info]: "
62 * HW_ERR
63 * Add this to a message for hardware errors, so that user can report
64 * it to hardware vendor instead of LKML or software vendor.
66 #define HW_ERR "[Hardware Error]: "
68 #ifdef CONFIG_PRINTK
69 asmlinkage int vprintk(const char *fmt, va_list args)
70 __attribute__ ((format (printf, 1, 0)));
71 asmlinkage int printk(const char * fmt, ...)
72 __attribute__ ((format (printf, 1, 2))) __cold;
75 * Please don't use printk_ratelimit(), because it shares ratelimiting state
76 * with all other unrelated printk_ratelimit() callsites. Instead use
77 * printk_ratelimited() or plain old __ratelimit().
79 extern int __printk_ratelimit(const char *func);
80 #define printk_ratelimit() __printk_ratelimit(__func__)
81 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
82 unsigned int interval_msec);
84 extern int printk_delay_msec;
85 extern int dmesg_restrict;
88 * Print a one-time message (analogous to WARN_ONCE() et al):
90 #define printk_once(x...) ({ \
91 static bool __print_once; \
93 if (!__print_once) { \
94 __print_once = true; \
95 printk(x); \
96 } \
99 void log_buf_kexec_setup(void);
100 #else
101 static inline int vprintk(const char *s, va_list args)
102 __attribute__ ((format (printf, 1, 0)));
103 static inline int vprintk(const char *s, va_list args) { return 0; }
104 static inline int printk(const char *s, ...)
105 __attribute__ ((format (printf, 1, 2)));
106 static inline int __cold printk(const char *s, ...) { return 0; }
107 static inline int printk_ratelimit(void) { return 0; }
108 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
109 unsigned int interval_msec) \
110 { return false; }
112 /* No effect, but we still get type checking even in the !PRINTK case: */
113 #define printk_once(x...) printk(x)
115 static inline void log_buf_kexec_setup(void)
118 #endif
121 * Dummy printk for disabled debugging statements to use whilst maintaining
122 * gcc's format and side-effect checking.
124 static inline __attribute__ ((format (printf, 1, 2)))
125 int no_printk(const char *s, ...) { return 0; }
127 extern int printk_needs_cpu(int cpu);
128 extern void printk_tick(void);
130 extern void asmlinkage __attribute__((format(printf, 1, 2)))
131 early_printk(const char *fmt, ...);
133 static inline void console_silent(void)
135 console_loglevel = 0;
138 static inline void console_verbose(void)
140 if (console_loglevel)
141 console_loglevel = 15;
144 extern void dump_stack(void) __cold;
146 enum {
147 DUMP_PREFIX_NONE,
148 DUMP_PREFIX_ADDRESS,
149 DUMP_PREFIX_OFFSET
151 extern void hex_dump_to_buffer(const void *buf, size_t len,
152 int rowsize, int groupsize,
153 char *linebuf, size_t linebuflen, bool ascii);
154 extern void print_hex_dump(const char *level, const char *prefix_str,
155 int prefix_type, int rowsize, int groupsize,
156 const void *buf, size_t len, bool ascii);
157 extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
158 const void *buf, size_t len);
160 #ifndef pr_fmt
161 #define pr_fmt(fmt) fmt
162 #endif
164 #define pr_emerg(fmt, ...) \
165 printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
166 #define pr_alert(fmt, ...) \
167 printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
168 #define pr_crit(fmt, ...) \
169 printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
170 #define pr_err(fmt, ...) \
171 printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
172 #define pr_warning(fmt, ...) \
173 printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
174 #define pr_warn pr_warning
175 #define pr_notice(fmt, ...) \
176 printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
177 #define pr_info(fmt, ...) \
178 printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
179 #define pr_cont(fmt, ...) \
180 printk(KERN_CONT fmt, ##__VA_ARGS__)
182 /* pr_devel() should produce zero code unless DEBUG is defined */
183 #ifdef DEBUG
184 #define pr_devel(fmt, ...) \
185 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
186 #else
187 #define pr_devel(fmt, ...) \
188 ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
189 #endif
191 /* If you are writing a driver, please use dev_dbg instead */
192 #if defined(DEBUG)
193 #define pr_debug(fmt, ...) \
194 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
195 #elif defined(CONFIG_DYNAMIC_DEBUG)
196 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
197 #define pr_debug(fmt, ...) \
198 dynamic_pr_debug(fmt, ##__VA_ARGS__)
199 #else
200 #define pr_debug(fmt, ...) \
201 ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
202 #endif
205 * ratelimited messages with local ratelimit_state,
206 * no local ratelimit_state used in the !PRINTK case
208 #ifdef CONFIG_PRINTK
209 #define printk_ratelimited(fmt, ...) ({ \
210 static DEFINE_RATELIMIT_STATE(_rs, \
211 DEFAULT_RATELIMIT_INTERVAL, \
212 DEFAULT_RATELIMIT_BURST); \
214 if (__ratelimit(&_rs)) \
215 printk(fmt, ##__VA_ARGS__); \
217 #else
218 /* No effect, but we still get type checking even in the !PRINTK case: */
219 #define printk_ratelimited printk
220 #endif
222 #define pr_emerg_ratelimited(fmt, ...) \
223 printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
224 #define pr_alert_ratelimited(fmt, ...) \
225 printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
226 #define pr_crit_ratelimited(fmt, ...) \
227 printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
228 #define pr_err_ratelimited(fmt, ...) \
229 printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
230 #define pr_warning_ratelimited(fmt, ...) \
231 printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
232 #define pr_warn_ratelimited pr_warning_ratelimited
233 #define pr_notice_ratelimited(fmt, ...) \
234 printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
235 #define pr_info_ratelimited(fmt, ...) \
236 printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
237 /* no pr_cont_ratelimited, don't do that... */
238 /* If you are writing a driver, please use dev_dbg instead */
239 #if defined(DEBUG)
240 #define pr_debug_ratelimited(fmt, ...) \
241 printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
242 #else
243 #define pr_debug_ratelimited(fmt, ...) \
244 ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
245 ##__VA_ARGS__); 0; })
246 #endif
248 #endif