2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/jiffies.h>
31 #include <linux/timer.h>
32 #include <linux/sched.h>
33 #include <linux/semaphore.h>
35 #include <linux/delay.h>
36 #include <linux/wireless.h>
38 #include "rtl819x_HT.h"
39 #include "rtl819x_BA.h"
40 #include "rtl819x_TS.h"
42 #ifndef IW_MODE_MONITOR
43 #define IW_MODE_MONITOR 6
47 #define IWEVCUSTOM 0x8c02
50 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
52 #define __bitwise __attribute__((bitwise))
55 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
57 /* --- Standard spy support --- */
59 u_char spy_address
[IW_MAX_SPY
][ETH_ALEN
];
60 struct iw_quality spy_stat
[IW_MAX_SPY
];
61 /* --- Enhanced spy support (event) */
62 struct iw_quality spy_thr_low
; /* Low threshold */
63 struct iw_quality spy_thr_high
; /* High threshold */
64 u_char spy_thr_under
[IW_MAX_SPY
];
71 * container_of - cast a member of a structure out to the containing structure
73 * @ptr: the pointer to the member.
74 * @type: the type of the container struct this is embedded in.
75 * @member: the name of the member within the struct.
78 #define container_of(ptr, type, member) ({ \
79 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
80 (type *)( (char *)__mptr - offsetof(type,member) );})
83 #define KEY_TYPE_NA 0x0
84 #define KEY_TYPE_WEP40 0x1
85 #define KEY_TYPE_TKIP 0x2
86 #define KEY_TYPE_CCMP 0x4
87 #define KEY_TYPE_WEP104 0x5
89 /* added for rtl819x tx procedure */
90 #define MAX_QUEUE_SIZE 0x10
100 #define TXCMD_QUEUE 5
103 #define BEACON_QUEUE 8
105 #define LOW_QUEUE BE_QUEUE
106 #define NORMAL_QUEUE MGNT_QUEUE
108 //added by amy for ps
109 #define SWRF_TIMEOUT 50
111 //added by amy for LEAP related
112 #define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
113 #define SUPPORT_CKIP_MIC 0x08 // bit3
114 #define SUPPORT_CKIP_PK 0x10 // bit4
115 /* defined for skb cb field */
116 /* At most 28 byte */
117 typedef struct cb_desc
{
118 /* Tx Desc Related flags (8-9) */
124 u8 bTxDisableRateFallBack
:1;
125 u8 bTxUseDriverAssingedRate
:1;
126 u8 bHwSec
:1; //indicate whether use Hw security. WB
130 /* Tx Firmware Relaged flags (10-11)*/
134 u8 bUseShortPreamble
:1;
135 u8 bTxEnableFwCalcDur
:1;
142 u8 bRTSUseShortPreamble
:1;
150 /* Tx Desc related element(12-19) */
162 /* Tx firmware related element(20-27) */
177 /*--------------------------Define -------------------------------------------*/
180 #define MGN_5_5M 0x0b
192 #define MGN_MCS0 0x80
193 #define MGN_MCS1 0x81
194 #define MGN_MCS2 0x82
195 #define MGN_MCS3 0x83
196 #define MGN_MCS4 0x84
197 #define MGN_MCS5 0x85
198 #define MGN_MCS6 0x86
199 #define MGN_MCS7 0x87
200 #define MGN_MCS8 0x88
201 #define MGN_MCS9 0x89
202 #define MGN_MCS10 0x8a
203 #define MGN_MCS11 0x8b
204 #define MGN_MCS12 0x8c
205 #define MGN_MCS13 0x8d
206 #define MGN_MCS14 0x8e
207 #define MGN_MCS15 0x8f
209 //----------------------------------------------------------------------------
210 // 802.11 Management frame Reason Code field
211 //----------------------------------------------------------------------------
214 auth_not_valid
= 0x2,
227 // Reason code defined in 802.11i D10.0 p.28.
229 four_way_tmout
= 0x0f,
230 two_way_tmout
= 0x10,
232 invalid_Gcipher
= 0x12,
233 invalid_Pcipher
= 0x13,
235 unsup_RSNIEver
= 0x15,
236 invalid_RSNIE
= 0x16,
237 auth_802_1x_fail
= 0x17,
240 // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
241 QoS_unspec
= 0x20, // 32
242 QAP_bandwidth
= 0x21, // 33
243 poor_condition
= 0x22, // 34
244 no_facility
= 0x23, // 35
246 req_declined
= 0x25, // 37
247 invalid_param
= 0x26, // 38
248 req_not_honored
= 0x27, // 39
249 TS_not_created
= 0x2F, // 47
250 DL_not_allowed
= 0x30, // 48
251 dest_not_exist
= 0x31, // 49
252 dest_not_QSTA
= 0x32, // 50
257 #define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
259 #define MGMT_QUEUE_NUM 5
261 #define IEEE_CMD_SET_WPA_PARAM 1
262 #define IEEE_CMD_SET_WPA_IE 2
263 #define IEEE_CMD_SET_ENCRYPTION 3
264 #define IEEE_CMD_MLME 4
266 #define IEEE_PARAM_WPA_ENABLED 1
267 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
268 #define IEEE_PARAM_DROP_UNENCRYPTED 3
269 #define IEEE_PARAM_PRIVACY_INVOKED 4
270 #define IEEE_PARAM_AUTH_ALGS 5
271 #define IEEE_PARAM_IEEE_802_1X 6
272 //It should consistent with the driver_XXX.c
274 #define IEEE_PARAM_WPAX_SELECT 7
275 //Added for notify the encryption type selection
277 #define IEEE_PROTO_WPA 1
278 #define IEEE_PROTO_RSN 2
279 //Added for notify the encryption type selection
281 #define IEEE_WPAX_USEGROUP 0
282 #define IEEE_WPAX_WEP40 1
283 #define IEEE_WPAX_TKIP 2
284 #define IEEE_WPAX_WRAP 3
285 #define IEEE_WPAX_CCMP 4
286 #define IEEE_WPAX_WEP104 5
288 #define IEEE_KEY_MGMT_IEEE8021X 1
289 #define IEEE_KEY_MGMT_PSK 2
291 #define IEEE_MLME_STA_DEAUTH 1
292 #define IEEE_MLME_STA_DISASSOC 2
295 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
296 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
297 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
298 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
299 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
300 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
303 #define IEEE_CRYPT_ALG_NAME_LEN 16
305 #define MAX_IE_LEN 0xff
307 // added for kernel conflict
308 #define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
309 #define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
310 #define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
311 #define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl
312 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
313 #define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl
315 #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl
317 #define ieee80211_tkip_null ieee80211_tkip_null_rsl
319 #define ieee80211_wep_null ieee80211_wep_null_rsl
321 #define free_ieee80211 free_ieee80211_rsl
322 #define alloc_ieee80211 alloc_ieee80211_rsl
324 #define ieee80211_rx ieee80211_rx_rsl
325 #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl
327 #define ieee80211_get_beacon ieee80211_get_beacon_rsl
328 #define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl
329 #define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl
330 #define ieee80211_reset_queue ieee80211_reset_queue_rsl
331 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
332 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
333 #define ieee80211_is_shortslot ieee80211_is_shortslot_rsl
334 #define ieee80211_is_54g ieee80211_is_54g_rsl
335 #define ieee80211_wpa_supplicant_ioctl ieee80211_wpa_supplicant_ioctl_rsl
336 #define ieee80211_ps_tx_ack ieee80211_ps_tx_ack_rsl
337 #define ieee80211_softmac_xmit ieee80211_softmac_xmit_rsl
338 #define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rsl
339 #define notify_wx_assoc_event notify_wx_assoc_event_rsl
340 #define SendDisassociation SendDisassociation_rsl
341 #define ieee80211_disassociate ieee80211_disassociate_rsl
342 #define ieee80211_start_send_beacons ieee80211_start_send_beacons_rsl
343 #define ieee80211_stop_scan ieee80211_stop_scan_rsl
344 #define ieee80211_send_probe_requests ieee80211_send_probe_requests_rsl
345 #define ieee80211_softmac_scan_syncro ieee80211_softmac_scan_syncro_rsl
346 #define ieee80211_start_scan_syncro ieee80211_start_scan_syncro_rsl
348 #define ieee80211_wx_get_essid ieee80211_wx_get_essid_rsl
349 #define ieee80211_wx_set_essid ieee80211_wx_set_essid_rsl
350 #define ieee80211_wx_set_rate ieee80211_wx_set_rate_rsl
351 #define ieee80211_wx_get_rate ieee80211_wx_get_rate_rsl
352 #define ieee80211_wx_set_wap ieee80211_wx_set_wap_rsl
353 #define ieee80211_wx_get_wap ieee80211_wx_get_wap_rsl
354 #define ieee80211_wx_set_mode ieee80211_wx_set_mode_rsl
355 #define ieee80211_wx_get_mode ieee80211_wx_get_mode_rsl
356 #define ieee80211_wx_set_scan ieee80211_wx_set_scan_rsl
357 #define ieee80211_wx_get_freq ieee80211_wx_get_freq_rsl
358 #define ieee80211_wx_set_freq ieee80211_wx_set_freq_rsl
359 #define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rsl
360 #define ieee80211_wx_get_name ieee80211_wx_get_name_rsl
361 #define ieee80211_wx_set_power ieee80211_wx_set_power_rsl
362 #define ieee80211_wx_get_power ieee80211_wx_get_power_rsl
363 #define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rsl
364 #define ieee80211_wx_set_rts ieee80211_wx_set_rts_rsl
365 #define ieee80211_wx_get_rts ieee80211_wx_get_rts_rsl
367 #define ieee80211_txb_free ieee80211_txb_free_rsl
369 #define ieee80211_wx_set_gen_ie ieee80211_wx_set_gen_ie_rsl
370 #define ieee80211_wx_get_scan ieee80211_wx_get_scan_rsl
371 #define ieee80211_wx_set_encode ieee80211_wx_set_encode_rsl
372 #define ieee80211_wx_get_encode ieee80211_wx_get_encode_rsl
373 #if WIRELESS_EXT >= 18
374 #define ieee80211_wx_set_mlme ieee80211_wx_set_mlme_rsl
375 #define ieee80211_wx_set_auth ieee80211_wx_set_auth_rsl
376 #define ieee80211_wx_set_encode_ext ieee80211_wx_set_encode_ext_rsl
377 #define ieee80211_wx_get_encode_ext ieee80211_wx_get_encode_ext_rsl
381 typedef struct ieee_param
{
383 u8 sta_addr
[ETH_ALEN
];
399 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
403 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
411 #if WIRELESS_EXT < 17
412 #define IW_QUAL_QUAL_INVALID 0x10
413 #define IW_QUAL_LEVEL_INVALID 0x20
414 #define IW_QUAL_NOISE_INVALID 0x40
415 #define IW_QUAL_QUAL_UPDATED 0x1
416 #define IW_QUAL_LEVEL_UPDATED 0x2
417 #define IW_QUAL_NOISE_UPDATED 0x4
420 // linux under 2.6.9 release may not support it, so modify it for common use
421 #define MSECS(t) msecs_to_jiffies(t)
422 #define msleep_interruptible_rsl msleep_interruptible
424 #define IEEE80211_DATA_LEN 2304
425 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
428 The figure in section 7.1.2 suggests a body size of up to 2312
429 bytes is allowed, which is a bit confusing, I suspect this
430 represents the 2304 bytes of real data, plus a possible 8 bytes of
431 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
432 #define IEEE80211_1ADDR_LEN 10
433 #define IEEE80211_2ADDR_LEN 16
434 #define IEEE80211_3ADDR_LEN 24
435 #define IEEE80211_4ADDR_LEN 30
436 #define IEEE80211_FCS_LEN 4
437 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
438 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
439 #define IEEE80211_MGMT_HDR_LEN 24
440 #define IEEE80211_DATA_HDR3_LEN 24
441 #define IEEE80211_DATA_HDR4_LEN 30
443 #define MIN_FRAG_THRESHOLD 256U
444 #define MAX_FRAG_THRESHOLD 2346U
447 /* Frame control field constants */
448 #define IEEE80211_FCTL_VERS 0x0003
449 #define IEEE80211_FCTL_FTYPE 0x000c
450 #define IEEE80211_FCTL_STYPE 0x00f0
451 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
452 #define IEEE80211_FCTL_TODS 0x0100
453 #define IEEE80211_FCTL_FROMDS 0x0200
454 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
455 #define IEEE80211_FCTL_MOREFRAGS 0x0400
456 #define IEEE80211_FCTL_RETRY 0x0800
457 #define IEEE80211_FCTL_PM 0x1000
458 #define IEEE80211_FCTL_MOREDATA 0x2000
459 #define IEEE80211_FCTL_WEP 0x4000
460 #define IEEE80211_FCTL_ORDER 0x8000
462 #define IEEE80211_FTYPE_MGMT 0x0000
463 #define IEEE80211_FTYPE_CTL 0x0004
464 #define IEEE80211_FTYPE_DATA 0x0008
467 #define IEEE80211_STYPE_ASSOC_REQ 0x0000
468 #define IEEE80211_STYPE_ASSOC_RESP 0x0010
469 #define IEEE80211_STYPE_REASSOC_REQ 0x0020
470 #define IEEE80211_STYPE_REASSOC_RESP 0x0030
471 #define IEEE80211_STYPE_PROBE_REQ 0x0040
472 #define IEEE80211_STYPE_PROBE_RESP 0x0050
473 #define IEEE80211_STYPE_BEACON 0x0080
474 #define IEEE80211_STYPE_ATIM 0x0090
475 #define IEEE80211_STYPE_DISASSOC 0x00A0
476 #define IEEE80211_STYPE_AUTH 0x00B0
477 #define IEEE80211_STYPE_DEAUTH 0x00C0
478 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
481 #define IEEE80211_STYPE_PSPOLL 0x00A0
482 #define IEEE80211_STYPE_RTS 0x00B0
483 #define IEEE80211_STYPE_CTS 0x00C0
484 #define IEEE80211_STYPE_ACK 0x00D0
485 #define IEEE80211_STYPE_CFEND 0x00E0
486 #define IEEE80211_STYPE_CFENDACK 0x00F0
487 #define IEEE80211_STYPE_BLOCKACK 0x0094
490 #define IEEE80211_STYPE_DATA 0x0000
491 #define IEEE80211_STYPE_DATA_CFACK 0x0010
492 #define IEEE80211_STYPE_DATA_CFPOLL 0x0020
493 #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
494 #define IEEE80211_STYPE_NULLFUNC 0x0040
495 #define IEEE80211_STYPE_CFACK 0x0050
496 #define IEEE80211_STYPE_CFPOLL 0x0060
497 #define IEEE80211_STYPE_CFACKPOLL 0x0070
498 #define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
499 #define IEEE80211_STYPE_QOS_NULL 0x00C0
501 #define IEEE80211_SCTL_FRAG 0x000F
502 #define IEEE80211_SCTL_SEQ 0xFFF0
505 #define IEEE80211_QCTL_TID 0x000F
507 #define FC_QOS_BIT BIT7
508 #define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
509 #define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
510 //added by wb. Is this right?
511 #define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
512 #define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
513 #define SN_LESS(a, b) (((a-b)&0x800)!=0)
514 #define SN_EQUAL(a, b) (a == b)
515 #define MAX_DEV_ADDR_SIZE 8
516 typedef enum _ACT_CATEGORY
{
522 } ACT_CATEGORY
, *PACT_CATEGORY
;
524 typedef enum _TS_ACTION
{
529 } TS_ACTION
, *PTS_ACTION
;
531 typedef enum _BA_ACTION
{
535 } BA_ACTION
, *PBA_ACTION
;
537 typedef enum _InitialGainOpType
{
544 #define CONFIG_IEEE80211_DEBUG
545 #ifdef CONFIG_IEEE80211_DEBUG
546 extern u32 ieee80211_debug_level
;
547 #define IEEE80211_DEBUG(level, fmt, args...) \
548 do { if (ieee80211_debug_level & (level)) \
549 printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
550 //wb added to debug out data buf
551 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
552 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
553 do{ if ((ieee80211_debug_level & (level)) == (level)) \
556 u8* pdata = (u8*) data; \
557 printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
558 for(i=0; i<(int)(datalen); i++) \
560 printk("%2x ", pdata[i]); \
561 if ((i+1)%16 == 0) printk("\n"); \
567 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
568 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
569 #endif /* CONFIG_IEEE80211_DEBUG */
571 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
574 * To use the debug system;
576 * If you are defining a new debug classification, simply add it to the #define
577 * list here in the form of:
579 * #define IEEE80211_DL_xxxx VALUE
581 * shifting value to the left one bit from the previous entry. xxxx should be
582 * the name of the classification (for example, WEP)
584 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
585 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
586 * to send output to that classification.
588 * To add your debug level to the list of levels seen when you perform
590 * % cat /proc/net/ipw/debug_level
592 * you simply need to add your entry to the ipw_debug_levels array.
594 * If you do not see debug_level in /proc/net/ipw then you do not have
595 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
599 #define IEEE80211_DL_INFO (1<<0)
600 #define IEEE80211_DL_WX (1<<1)
601 #define IEEE80211_DL_SCAN (1<<2)
602 #define IEEE80211_DL_STATE (1<<3)
603 #define IEEE80211_DL_MGMT (1<<4)
604 #define IEEE80211_DL_FRAG (1<<5)
605 #define IEEE80211_DL_EAP (1<<6)
606 #define IEEE80211_DL_DROP (1<<7)
608 #define IEEE80211_DL_TX (1<<8)
609 #define IEEE80211_DL_RX (1<<9)
611 #define IEEE80211_DL_HT (1<<10) //HT
612 #define IEEE80211_DL_BA (1<<11) //ba
613 #define IEEE80211_DL_TS (1<<12) //TS
614 #define IEEE80211_DL_QOS (1<<13)
615 #define IEEE80211_DL_REORDER (1<<14)
616 #define IEEE80211_DL_IOT (1<<15)
617 #define IEEE80211_DL_IPS (1<<16)
618 #define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
619 #define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
620 #define IEEE80211_DL_ERR (1<<31) //always open
621 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
622 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
623 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
625 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
626 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
627 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
628 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
629 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
630 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
631 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
632 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
633 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
634 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
636 #ifdef CONFIG_IEEE80211_DEBUG
637 /* Added by Annie, 2005-11-22. */
638 #define MAX_STR_LEN 64
639 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
640 #define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
641 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
642 if((_Comp) & level) \
645 u8 buffer[MAX_STR_LEN]; \
646 int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
647 memset(buffer, 0, MAX_STR_LEN); \
648 memcpy(buffer, (u8 *)_Ptr, length ); \
649 for( __i=0; __i<MAX_STR_LEN; __i++ ) \
651 if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
653 buffer[length] = '\0'; \
654 printk("Rtl819x: "); \
655 printk(_TitleString); \
656 printk(": %d, <%s>\n", _Len, buffer); \
659 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) do {} while (0)
662 #include <linux/netdevice.h>
663 #include <linux/if_arp.h> /* ARPHRD_ETHER */
666 #define WIRELESS_SPY // enable iwspy support
668 #include <net/iw_handler.h> // new driver API
671 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
672 #endif /* ETH_P_PAE */
674 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
676 #ifndef ETH_P_80211_RAW
677 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
680 /* IEEE 802.11 defines */
682 #define P80211_OUI_LEN 3
684 struct ieee80211_snap_hdr
{
686 u8 dsap
; /* always 0xAA */
687 u8 ssap
; /* always 0xAA */
688 u8 ctrl
; /* always 0x03 */
689 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
691 } __attribute__ ((packed
));
693 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
695 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
696 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
697 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
698 #define WLAN_FC_MORE_DATA(fc) ((fc) & IEEE80211_FCTL_MOREDATA)
701 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
702 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
703 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
705 /* Authentication algorithms */
706 #define WLAN_AUTH_OPEN 0
707 #define WLAN_AUTH_SHARED_KEY 1
708 #define WLAN_AUTH_LEAP 2
710 #define WLAN_AUTH_CHALLENGE_LEN 128
712 #define WLAN_CAPABILITY_BSS (1<<0)
713 #define WLAN_CAPABILITY_IBSS (1<<1)
714 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
715 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
716 #define WLAN_CAPABILITY_PRIVACY (1<<4)
717 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
718 #define WLAN_CAPABILITY_PBCC (1<<6)
719 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
720 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
721 #define WLAN_CAPABILITY_QOS (1<<9)
722 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
723 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
725 /* 802.11g ERP information element */
726 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
727 #define WLAN_ERP_USE_PROTECTION (1<<1)
728 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
731 enum ieee80211_statuscode
{
732 WLAN_STATUS_SUCCESS
= 0,
733 WLAN_STATUS_UNSPECIFIED_FAILURE
= 1,
734 WLAN_STATUS_CAPS_UNSUPPORTED
= 10,
735 WLAN_STATUS_REASSOC_NO_ASSOC
= 11,
736 WLAN_STATUS_ASSOC_DENIED_UNSPEC
= 12,
737 WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG
= 13,
738 WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION
= 14,
739 WLAN_STATUS_CHALLENGE_FAIL
= 15,
740 WLAN_STATUS_AUTH_TIMEOUT
= 16,
741 WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA
= 17,
742 WLAN_STATUS_ASSOC_DENIED_RATES
= 18,
744 WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE
= 19,
745 WLAN_STATUS_ASSOC_DENIED_NOPBCC
= 20,
746 WLAN_STATUS_ASSOC_DENIED_NOAGILITY
= 21,
748 WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM
= 22,
749 WLAN_STATUS_ASSOC_REJECTED_BAD_POWER
= 23,
750 WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN
= 24,
752 WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME
= 25,
753 WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM
= 26,
755 WLAN_STATUS_INVALID_IE
= 40,
756 WLAN_STATUS_INVALID_GROUP_CIPHER
= 41,
757 WLAN_STATUS_INVALID_PAIRWISE_CIPHER
= 42,
758 WLAN_STATUS_INVALID_AKMP
= 43,
759 WLAN_STATUS_UNSUPP_RSN_VERSION
= 44,
760 WLAN_STATUS_INVALID_RSN_IE_CAP
= 45,
761 WLAN_STATUS_CIPHER_SUITE_REJECTED
= 46,
765 enum ieee80211_reasoncode
{
766 WLAN_REASON_UNSPECIFIED
= 1,
767 WLAN_REASON_PREV_AUTH_NOT_VALID
= 2,
768 WLAN_REASON_DEAUTH_LEAVING
= 3,
769 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
= 4,
770 WLAN_REASON_DISASSOC_AP_BUSY
= 5,
771 WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA
= 6,
772 WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA
= 7,
773 WLAN_REASON_DISASSOC_STA_HAS_LEFT
= 8,
774 WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH
= 9,
776 WLAN_REASON_DISASSOC_BAD_POWER
= 10,
777 WLAN_REASON_DISASSOC_BAD_SUPP_CHAN
= 11,
779 WLAN_REASON_INVALID_IE
= 13,
780 WLAN_REASON_MIC_FAILURE
= 14,
781 WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT
= 15,
782 WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT
= 16,
783 WLAN_REASON_IE_DIFFERENT
= 17,
784 WLAN_REASON_INVALID_GROUP_CIPHER
= 18,
785 WLAN_REASON_INVALID_PAIRWISE_CIPHER
= 19,
786 WLAN_REASON_INVALID_AKMP
= 20,
787 WLAN_REASON_UNSUPP_RSN_VERSION
= 21,
788 WLAN_REASON_INVALID_RSN_IE_CAP
= 22,
789 WLAN_REASON_IEEE8021X_FAILED
= 23,
790 WLAN_REASON_CIPHER_SUITE_REJECTED
= 24,
793 #define IEEE80211_STATMASK_SIGNAL (1<<0)
794 #define IEEE80211_STATMASK_RSSI (1<<1)
795 #define IEEE80211_STATMASK_NOISE (1<<2)
796 #define IEEE80211_STATMASK_RATE (1<<3)
797 #define IEEE80211_STATMASK_WEMASK 0x7
799 #define IEEE80211_CCK_MODULATION (1<<0)
800 #define IEEE80211_OFDM_MODULATION (1<<1)
802 #define IEEE80211_24GHZ_BAND (1<<0)
803 #define IEEE80211_52GHZ_BAND (1<<1)
805 #define IEEE80211_CCK_RATE_LEN 4
806 #define IEEE80211_CCK_RATE_1MB 0x02
807 #define IEEE80211_CCK_RATE_2MB 0x04
808 #define IEEE80211_CCK_RATE_5MB 0x0B
809 #define IEEE80211_CCK_RATE_11MB 0x16
810 #define IEEE80211_OFDM_RATE_LEN 8
811 #define IEEE80211_OFDM_RATE_6MB 0x0C
812 #define IEEE80211_OFDM_RATE_9MB 0x12
813 #define IEEE80211_OFDM_RATE_12MB 0x18
814 #define IEEE80211_OFDM_RATE_18MB 0x24
815 #define IEEE80211_OFDM_RATE_24MB 0x30
816 #define IEEE80211_OFDM_RATE_36MB 0x48
817 #define IEEE80211_OFDM_RATE_48MB 0x60
818 #define IEEE80211_OFDM_RATE_54MB 0x6C
819 #define IEEE80211_BASIC_RATE_MASK 0x80
821 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
822 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
823 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
824 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
825 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
826 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
827 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
828 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
829 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
830 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
831 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
832 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
834 #define IEEE80211_CCK_RATES_MASK 0x0000000F
835 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
836 IEEE80211_CCK_RATE_2MB_MASK)
837 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
838 IEEE80211_CCK_RATE_5MB_MASK | \
839 IEEE80211_CCK_RATE_11MB_MASK)
841 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
842 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
843 IEEE80211_OFDM_RATE_12MB_MASK | \
844 IEEE80211_OFDM_RATE_24MB_MASK)
845 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
846 IEEE80211_OFDM_RATE_9MB_MASK | \
847 IEEE80211_OFDM_RATE_18MB_MASK | \
848 IEEE80211_OFDM_RATE_36MB_MASK | \
849 IEEE80211_OFDM_RATE_48MB_MASK | \
850 IEEE80211_OFDM_RATE_54MB_MASK)
851 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
852 IEEE80211_CCK_DEFAULT_RATES_MASK)
854 #define IEEE80211_NUM_OFDM_RATES 8
855 #define IEEE80211_NUM_CCK_RATES 4
856 #define IEEE80211_OFDM_SHIFT_MASK_A 4
859 /* this is stolen and modified from the madwifi driver*/
860 #define IEEE80211_FC0_TYPE_MASK 0x0c
861 #define IEEE80211_FC0_TYPE_DATA 0x08
862 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
863 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
865 #define IEEE80211_QOS_HAS_SEQ(fc) \
866 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
867 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
869 /* this is stolen from ipw2200 driver */
870 #define IEEE_IBSS_MAC_HASH_SIZE 31
871 struct ieee_ibss_seq
{
875 unsigned long packet_time
[17];
876 struct list_head list
;
879 /* NOTE: This data is for statistical purposes; not all hardware provides this
880 * information for frames received. Not setting these will not cause
881 * any adverse affects. */
882 struct ieee80211_rx_stats
{
888 u16 rate
; /* in 100 kbps */
898 // u8 DataRate; // In 0.5 Mbps
899 u8 SignalQuality
; // in 0-100 index.
900 s32 RecvSignalPower
; // Real power in dBm for this packet, no beautification and aggregation.
901 s8 RxPower
; // in dBm Translate from PWdB
902 u8 SignalStrength
; // in 0-100 index.
906 u16 bShortPreamble
:1;
907 u16 Antenna
:1; //for rtl8185
908 u16 Decrypted
:1; //for rtl8185, rtl8187
909 u16 Wakeup
:1; //for rtl8185
910 u16 Reserved0
:1; //for rtl8185
915 bool bIsQosData
; // Added by Annie, 2005-12-22.
918 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
919 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
920 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
927 bool RxIs40MHzPacket
;
929 u8 RxMIMOSignalStrength
[4]; // in 0~100 index
930 s8 RxMIMOSignalQuality
[2];
931 bool bPacketMatchBSSID
;
936 u16 packetlength
; // Total packet length: Must equal to sum of all FragLength
937 u16 fraglength
; // FragLength should equal to PacketLength in non-fragment case
938 u16 fragoffset
; // Data offset for this fragment
940 bool bisrxaggrsubframe
;
941 bool bPacketBeacon
; //cosa add for rssi
942 bool bToSelfBA
; //cosa add for rssi
943 char cck_adc_pwdb
[4]; //cosa add for rx path selection
949 /* IEEE 802.11 requires that STA supports concurrent reception of at least
950 * three fragmented frames. This define can be increased to support more
951 * concurrent frames, but it should be noted that each entry can consume about
952 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
953 #define IEEE80211_FRAG_CACHE_LEN 4
955 struct ieee80211_frag_entry
{
956 unsigned long first_frag_time
;
958 unsigned int last_frag
;
960 u8 src_addr
[ETH_ALEN
];
961 u8 dst_addr
[ETH_ALEN
];
964 struct ieee80211_stats
{
965 unsigned int tx_unicast_frames
;
966 unsigned int tx_multicast_frames
;
967 unsigned int tx_fragments
;
968 unsigned int tx_unicast_octets
;
969 unsigned int tx_multicast_octets
;
970 unsigned int tx_deferred_transmissions
;
971 unsigned int tx_single_retry_frames
;
972 unsigned int tx_multiple_retry_frames
;
973 unsigned int tx_retry_limit_exceeded
;
974 unsigned int tx_discards
;
975 unsigned int rx_unicast_frames
;
976 unsigned int rx_multicast_frames
;
977 unsigned int rx_fragments
;
978 unsigned int rx_unicast_octets
;
979 unsigned int rx_multicast_octets
;
980 unsigned int rx_fcs_errors
;
981 unsigned int rx_discards_no_buffer
;
982 unsigned int tx_discards_wrong_sa
;
983 unsigned int rx_discards_undecryptable
;
984 unsigned int rx_message_in_msg_fragments
;
985 unsigned int rx_message_in_bad_msg_fragments
;
988 struct ieee80211_device
;
990 #include "ieee80211_crypt.h"
992 #define SEC_KEY_1 (1<<0)
993 #define SEC_KEY_2 (1<<1)
994 #define SEC_KEY_3 (1<<2)
995 #define SEC_KEY_4 (1<<3)
996 #define SEC_ACTIVE_KEY (1<<4)
997 #define SEC_AUTH_MODE (1<<5)
998 #define SEC_UNICAST_GROUP (1<<6)
999 #define SEC_LEVEL (1<<7)
1000 #define SEC_ENABLED (1<<8)
1001 #define SEC_ENCRYPT (1<<9)
1003 #define SEC_LEVEL_0 0 /* None */
1004 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
1005 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
1006 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
1007 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
1009 #define SEC_ALG_NONE 0
1010 #define SEC_ALG_WEP 1
1011 #define SEC_ALG_TKIP 2
1012 #define SEC_ALG_CCMP 4
1015 #define WEP_KEY_LEN 13
1016 #define SCM_KEY_LEN 32
1017 #define SCM_TEMPORAL_KEY_LENGTH 16
1019 struct ieee80211_security
{
1024 unicast_uses_group
:1,
1026 u8 key_sizes
[WEP_KEYS
];
1027 u8 keys
[WEP_KEYS
][SCM_KEY_LEN
];
1030 } __attribute__ ((packed
));
1034 802.11 data frame from AP
1035 ,-------------------------------------------------------------------.
1036 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
1037 |------|------|---------|---------|---------|------|---------|------|
1038 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
1039 | | tion | (BSSID) | | | ence | data | |
1040 `-------------------------------------------------------------------'
1041 Total: 28-2340 bytes
1044 /* Management Frame Information Element Types */
1045 enum ieee80211_mfie
{
1047 MFIE_TYPE_RATES
= 1,
1048 MFIE_TYPE_FH_SET
= 2,
1049 MFIE_TYPE_DS_SET
= 3,
1050 MFIE_TYPE_CF_SET
= 4,
1052 MFIE_TYPE_IBSS_SET
= 6,
1053 MFIE_TYPE_COUNTRY
= 7,
1054 MFIE_TYPE_HOP_PARAMS
= 8,
1055 MFIE_TYPE_HOP_TABLE
= 9,
1056 MFIE_TYPE_REQUEST
= 10,
1057 MFIE_TYPE_CHALLENGE
= 16,
1058 MFIE_TYPE_POWER_CONSTRAINT
= 32,
1059 MFIE_TYPE_POWER_CAPABILITY
= 33,
1060 MFIE_TYPE_TPC_REQUEST
= 34,
1061 MFIE_TYPE_TPC_REPORT
= 35,
1062 MFIE_TYPE_SUPP_CHANNELS
= 36,
1064 MFIE_TYPE_MEASURE_REQUEST
= 38,
1065 MFIE_TYPE_MEASURE_REPORT
= 39,
1066 MFIE_TYPE_QUIET
= 40,
1067 MFIE_TYPE_IBSS_DFS
= 41,
1070 MFIE_TYPE_RATES_EX
= 50,
1071 MFIE_TYPE_HT_CAP
= 45,
1072 MFIE_TYPE_HT_INFO
= 61,
1073 MFIE_TYPE_AIRONET
=133,
1074 MFIE_TYPE_GENERIC
= 221,
1075 MFIE_TYPE_QOS_PARAMETER
= 222,
1078 /* Minimal header; can be used for passing 802.11 frames with sufficient
1079 * information to determine what type of underlying data type is actually
1080 * stored in the data. */
1081 struct ieee80211_pspoll_hdr
{
1087 } __attribute__ ((packed
));
1089 struct ieee80211_hdr
{
1093 } __attribute__ ((packed
));
1095 struct ieee80211_hdr_1addr
{
1100 } __attribute__ ((packed
));
1102 struct ieee80211_hdr_2addr
{
1108 } __attribute__ ((packed
));
1110 struct ieee80211_hdr_3addr
{
1118 } __attribute__ ((packed
));
1120 struct ieee80211_hdr_4addr
{
1129 } __attribute__ ((packed
));
1131 struct ieee80211_hdr_3addrqos
{
1140 } __attribute__ ((packed
));
1142 struct ieee80211_hdr_4addrqos
{
1152 } __attribute__ ((packed
));
1154 struct ieee80211_info_element
{
1158 } __attribute__ ((packed
));
1160 struct ieee80211_authentication
{
1161 struct ieee80211_hdr_3addr header
;
1166 struct ieee80211_info_element info_element
[0];
1167 } __attribute__ ((packed
));
1169 struct ieee80211_disassoc
{
1170 struct ieee80211_hdr_3addr header
;
1172 } __attribute__ ((packed
));
1174 struct ieee80211_probe_request
{
1175 struct ieee80211_hdr_3addr header
;
1176 /* SSID, supported rates */
1177 struct ieee80211_info_element info_element
[0];
1178 } __attribute__ ((packed
));
1180 struct ieee80211_probe_response
{
1181 struct ieee80211_hdr_3addr header
;
1183 __le16 beacon_interval
;
1185 /* SSID, supported rates, FH params, DS params,
1186 * CF params, IBSS params, TIM (if beacon), RSN */
1187 struct ieee80211_info_element info_element
[0];
1188 } __attribute__ ((packed
));
1190 /* Alias beacon for probe_response */
1191 #define ieee80211_beacon ieee80211_probe_response
1193 struct ieee80211_assoc_request_frame
{
1194 struct ieee80211_hdr_3addr header
;
1196 __le16 listen_interval
;
1197 /* SSID, supported rates, RSN */
1198 struct ieee80211_info_element info_element
[0];
1199 } __attribute__ ((packed
));
1201 struct ieee80211_reassoc_request_frame
{
1202 struct ieee80211_hdr_3addr header
;
1204 __le16 listen_interval
;
1205 u8 current_ap
[ETH_ALEN
];
1206 /* SSID, supported rates, RSN */
1207 struct ieee80211_info_element info_element
[0];
1208 } __attribute__ ((packed
));
1210 struct ieee80211_assoc_response_frame
{
1211 struct ieee80211_hdr_3addr header
;
1215 struct ieee80211_info_element info_element
[0]; /* supported rates */
1216 } __attribute__ ((packed
));
1218 struct ieee80211_txb
{
1225 __le16 payload_size
;
1226 struct sk_buff
*fragments
[0];
1229 #define MAX_TX_AGG_COUNT 16
1230 struct ieee80211_drv_agg_txb
{
1231 u8 nr_drv_agg_frames
;
1232 struct sk_buff
*tx_agg_frames
[MAX_TX_AGG_COUNT
];
1233 }__attribute__((packed
));
1235 #define MAX_SUBFRAME_COUNT 64
1236 struct ieee80211_rxb
{
1238 struct sk_buff
*subframes
[MAX_SUBFRAME_COUNT
];
1241 }__attribute__((packed
));
1243 typedef union _frameqos
{
1253 }frameqos
,*pframeqos
;
1255 /* SWEEP TABLE ENTRIES NUMBER*/
1256 #define MAX_SWEEP_TAB_ENTRIES 42
1257 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
1258 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
1259 * only use 8, and then use extended rates for the remaining supported
1260 * rates. Other APs, however, stick all of their supported rates on the
1261 * main rates information element... */
1262 #define MAX_RATES_LENGTH ((u8)12)
1263 #define MAX_RATES_EX_LENGTH ((u8)16)
1264 #define MAX_NETWORK_COUNT 128
1266 #define MAX_CHANNEL_NUMBER 161
1267 #define IEEE80211_SOFTMAC_SCAN_TIME 100
1269 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1271 #define CRC_LENGTH 4U
1273 #define MAX_WPA_IE_LEN 64
1275 #define NETWORK_EMPTY_ESSID (1<<0)
1276 #define NETWORK_HAS_OFDM (1<<1)
1277 #define NETWORK_HAS_CCK (1<<2)
1280 #define NETWORK_HAS_QOS_PARAMETERS (1<<3)
1281 #define NETWORK_HAS_QOS_INFORMATION (1<<4)
1282 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
1283 NETWORK_HAS_QOS_INFORMATION)
1285 #define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
1286 #define NETWORK_HAS_CSA (1<<6)
1287 #define NETWORK_HAS_QUIET (1<<7)
1288 #define NETWORK_HAS_IBSS_DFS (1<<8)
1289 #define NETWORK_HAS_TPC_REPORT (1<<9)
1291 #define NETWORK_HAS_ERP_VALUE (1<<10)
1293 #define QOS_QUEUE_NUM 4
1294 #define QOS_OUI_LEN 3
1295 #define QOS_OUI_TYPE 2
1296 #define QOS_ELEMENT_ID 221
1297 #define QOS_OUI_INFO_SUB_TYPE 0
1298 #define QOS_OUI_PARAM_SUB_TYPE 1
1299 #define QOS_VERSION_1 1
1300 #define QOS_AIFSN_MIN_VALUE 2
1302 struct ieee80211_qos_information_element
{
1305 u8 qui
[QOS_OUI_LEN
];
1310 } __attribute__ ((packed
));
1312 struct ieee80211_qos_ac_parameter
{
1316 } __attribute__ ((packed
));
1318 struct ieee80211_qos_parameter_info
{
1319 struct ieee80211_qos_information_element info_element
;
1321 struct ieee80211_qos_ac_parameter ac_params_record
[QOS_QUEUE_NUM
];
1322 } __attribute__ ((packed
));
1324 struct ieee80211_qos_parameters
{
1325 __le16 cw_min
[QOS_QUEUE_NUM
];
1326 __le16 cw_max
[QOS_QUEUE_NUM
];
1327 u8 aifs
[QOS_QUEUE_NUM
];
1328 u8 flag
[QOS_QUEUE_NUM
];
1329 __le16 tx_op_limit
[QOS_QUEUE_NUM
];
1330 } __attribute__ ((packed
));
1332 struct ieee80211_qos_data
{
1333 struct ieee80211_qos_parameters parameters
;
1340 struct ieee80211_tim_parameters
{
1343 } __attribute__ ((packed
));
1346 struct ieee80211_wmm_ac_param
{
1347 u8 ac_aci_acm_aifsn
;
1348 u8 ac_ecwmin_ecwmax
;
1352 struct ieee80211_wmm_ts_info
{
1356 } __attribute__ ((packed
));
1358 struct ieee80211_wmm_tspec_elem
{
1359 struct ieee80211_wmm_ts_info ts_info
;
1366 u32 serv_start_time
;
1373 u16 surp_band_allow
;
1375 }__attribute__((packed
));
1382 EAPOL_ENCAP_ASF_ALERT
1385 static const char *eap_types
[] = {
1386 [EAP_PACKET
] = "EAP-Packet",
1387 [EAPOL_START
] = "EAPOL-Start",
1388 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
1389 [EAPOL_KEY
] = "EAPOL-Key",
1390 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
1393 static inline const char *eap_get_type(int type
)
1395 return ((u32
)type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
1397 //added by amy for reorder
1398 static inline u8
Frame_QoSTID(u8
* buf
)
1400 struct ieee80211_hdr_3addr
*hdr
;
1402 hdr
= (struct ieee80211_hdr_3addr
*)buf
;
1403 fc
= le16_to_cpu(hdr
->frame_ctl
);
1404 return (u8
)((frameqos
*)(buf
+ (((fc
& IEEE80211_FCTL_TODS
)&&(fc
& IEEE80211_FCTL_FROMDS
))? 30 : 24)))->field
.tid
;
1407 //added by amy for reorder
1415 } __attribute__ ((packed
));
1417 struct ieee80211_softmac_stats
{
1418 unsigned int rx_ass_ok
;
1419 unsigned int rx_ass_err
;
1420 unsigned int rx_probe_rq
;
1421 unsigned int tx_probe_rs
;
1422 unsigned int tx_beacons
;
1423 unsigned int rx_auth_rq
;
1424 unsigned int rx_auth_rs_ok
;
1425 unsigned int rx_auth_rs_err
;
1426 unsigned int tx_auth_rq
;
1427 unsigned int no_auth_rs
;
1428 unsigned int no_ass_rs
;
1429 unsigned int tx_ass_rq
;
1430 unsigned int rx_ass_rq
;
1431 unsigned int tx_probe_rq
;
1432 unsigned int reassoc
;
1433 unsigned int swtxstop
;
1434 unsigned int swtxawake
;
1435 unsigned char CurrentShowTxate
;
1436 unsigned char last_packet_rate
;
1437 unsigned int txretrycount
;
1440 #define BEACON_PROBE_SSID_ID_POSITION 12
1442 struct ieee80211_info_element_hdr
{
1445 } __attribute__ ((packed
));
1448 * These are the data types that can make up management packets
1452 u16 beacon_interval;
1454 u8 current_ap[ETH_ALEN];
1455 u16 listen_interval;
1457 u16 association_id:14, reserved:2;
1458 } __attribute__ ((packed));
1464 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1465 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1467 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
1468 #define MAX_SP_Len (WMM_all_frame << 4)
1469 #define IEEE80211_QOS_TID 0x0f
1470 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1472 #define IEEE80211_DTIM_MBCAST 4
1473 #define IEEE80211_DTIM_UCAST 2
1474 #define IEEE80211_DTIM_VALID 1
1475 #define IEEE80211_DTIM_INVALID 0
1477 #define IEEE80211_PS_DISABLED 0
1478 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1479 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1481 //added by David for QoS 2006/6/30
1482 //#define WMM_Hang_8187
1483 #ifdef WMM_Hang_8187
1484 #undef WMM_Hang_8187
1487 #define WME_AC_BK 0x00
1488 #define WME_AC_BE 0x01
1489 #define WME_AC_VI 0x02
1490 #define WME_AC_VO 0x03
1491 #define WME_ACI_MASK 0x03
1492 #define WME_AIFSN_MASK 0x03
1493 #define WME_AC_PRAM_LEN 16
1495 #define MAX_RECEIVE_BUFFER_SIZE 9100
1497 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1498 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
1500 #define UP2AC(up) ( \
1501 ((up) < 1) ? WME_AC_BE : \
1502 ((up) < 3) ? WME_AC_BK : \
1503 ((up) < 4) ? WME_AC_BE : \
1504 ((up) < 6) ? WME_AC_VI : \
1507 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1508 #define AC2UP(_ac) ( \
1509 ((_ac) == WME_AC_VO) ? 6 : \
1510 ((_ac) == WME_AC_VI) ? 5 : \
1511 ((_ac) == WME_AC_BK) ? 1 : \
1514 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
1515 #define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
1517 struct ether_header
{
1518 u8 ether_dhost
[ETHER_ADDR_LEN
];
1519 u8 ether_shost
[ETHER_ADDR_LEN
];
1521 } __attribute__((packed
));
1523 #ifndef ETHERTYPE_PAE
1524 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
1526 #ifndef ETHERTYPE_IP
1527 #define ETHERTYPE_IP 0x0800 /* IP protocol */
1530 typedef struct _bss_ht
{
1534 // HT related elements
1540 HT_SPEC_VER ht_spec_ver
;
1541 //HT_CAPABILITY_ELE bdHTCapEle;
1542 //HT_INFORMATION_ELE bdHTInfoEle;
1545 bool long_slot_time
;
1548 typedef enum _erp_t
{
1549 ERP_NonERPpresent
= 0x01,
1550 ERP_UseProtection
= 0x02,
1551 ERP_BarkerPreambleMode
= 0x04,
1555 struct ieee80211_network
{
1556 /* These entries are used to identify a unique network */
1559 /* Ensure null-terminated for any debug msgs */
1560 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
1563 struct ieee80211_qos_data qos_data
;
1565 // Qos related. Added by Annie, 2005-11-01.
1569 //added by amy for LEAP
1570 bool bWithAironetIE
;
1571 bool bCkipSupported
;
1574 // CCXv4 S59, MBSSID.
1578 // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1579 bool bWithCcxVerNum
;
1581 /* These are network statistics */
1582 struct ieee80211_rx_stats stats
;
1584 u8 rates
[MAX_RATES_LENGTH
];
1586 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
1588 unsigned long last_scanned
;
1593 u16 beacon_interval
;
1594 u16 listen_interval
;
1597 u8 wpa_ie
[MAX_WPA_IE_LEN
];
1599 u8 rsn_ie
[MAX_WPA_IE_LEN
];
1602 struct ieee80211_tim_parameters tim
;
1605 u32 last_dtim_sta_time
[2];
1609 struct ieee80211_wmm_ac_param wmm_param
[4];
1612 u8 Turbo_Enable
;//enable turbo mode, added by thomas
1614 #ifdef ENABLE_DOT11D
1616 u8 CountryIeBuf
[MAX_IE_LEN
];
1618 // HT Related, by amy, 2008.04.29
1620 // Add to handle broadcom AP management frame CCK rate.
1621 bool broadcom_cap_exist
;
1622 bool ralink_cap_exist
;
1623 bool atheros_cap_exist
;
1624 bool cisco_cap_exist
;
1625 bool marvell_cap_exist
;
1626 bool unknown_cap_exist
;
1628 bool berp_info_valid
;
1629 bool buseprotection
;
1630 //put at the end of the structure.
1631 struct list_head list
;
1635 enum ieee80211_state
{
1637 /* the card is not linked at all */
1638 IEEE80211_NOLINK
= 0,
1640 /* IEEE80211_ASSOCIATING* are for BSS client mode
1641 * the driver shall not perform RX filtering unless
1642 * the state is LINKED.
1643 * The driver shall just check for the state LINKED and
1644 * defaults to NOLINK for ALL the other states (including
1648 /* the association procedure will start (wq scheduling)*/
1649 IEEE80211_ASSOCIATING
,
1650 IEEE80211_ASSOCIATING_RETRY
,
1652 /* the association procedure is sending AUTH request*/
1653 IEEE80211_ASSOCIATING_AUTHENTICATING
,
1655 /* the association procedure has successfully authentcated
1656 * and is sending association request
1658 IEEE80211_ASSOCIATING_AUTHENTICATED
,
1660 /* the link is ok. the card associated to a BSS or linked
1661 * to a ibss cell or acting as an AP and creating the bss
1665 /* same as LINKED, but the driver shall apply RX filter
1666 * rules as we are in NO_LINK mode. As the card is still
1667 * logically linked, but it is doing a syncro site survey
1668 * then it will be back to LINKED state.
1670 IEEE80211_LINKED_SCANNING
,
1674 enum ieee80211_state
{
1675 IEEE80211_UNINITIALIZED
= 0,
1676 IEEE80211_INITIALIZED
,
1677 IEEE80211_ASSOCIATING
,
1678 IEEE80211_ASSOCIATED
,
1679 IEEE80211_AUTHENTICATING
,
1680 IEEE80211_AUTHENTICATED
,
1685 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1686 #define DEFAULT_FTS 2346
1688 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1689 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1690 #define CFG_IEEE80211_RTS (1<<2)
1692 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1693 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1694 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1695 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1697 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1698 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1699 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1700 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1702 typedef struct tx_pending_t
{
1704 struct ieee80211_txb
*txb
;
1707 typedef struct _bandwidth_autoswitch
1709 long threshold_20Mhzto40Mhz
;
1710 long threshold_40Mhzto20Mhz
;
1711 bool bforced_tx20Mhz
;
1712 bool bautoswitch_enable
;
1713 }bandwidth_autoswitch
,*pbandwidth_autoswitch
;
1716 //added by amy for order
1718 #define REORDER_WIN_SIZE 128
1719 #define REORDER_ENTRY_NUM 128
1720 typedef struct _RX_REORDER_ENTRY
1722 struct list_head List
;
1724 struct ieee80211_rxb
* prxb
;
1725 } RX_REORDER_ENTRY
, *PRX_REORDER_ENTRY
;
1726 //added by amy for order
1727 typedef enum _Fsync_State
{
1733 // Power save mode configured.
1734 typedef enum _RT_PS_MODE
1736 eActive
, // Active/Continuous access.
1737 eMaxPs
, // Max power save mode.
1738 eFastPs
// Fast power save mode.
1741 typedef enum _IPS_CALLBACK_FUNCION
1743 IPS_CALLBACK_NONE
= 0,
1744 IPS_CALLBACK_MGNT_LINK_REQUEST
= 1,
1745 IPS_CALLBACK_JOIN_REQUEST
= 2,
1746 }IPS_CALLBACK_FUNCION
;
1748 typedef enum _RT_JOIN_ACTION
{
1755 typedef struct _IbssParms
{
1757 }IbssParms
, *PIbssParms
;
1758 #define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
1761 typedef enum _RT_RF_POWER_STATE
1768 typedef struct _RT_POWER_SAVE_CONTROL
1772 // Inactive Power Save(IPS) : Disable RF when disconnected
1775 bool bIPSModeBackup
;
1776 bool bSwRfProcessing
;
1777 RT_RF_POWER_STATE eInactivePowerState
;
1778 struct work_struct InactivePsWorkItem
;
1779 struct timer_list InactivePsTimer
;
1781 // Return point for join action
1782 IPS_CALLBACK_FUNCION ReturnPoint
;
1784 // Recored Parameters for rescheduled JoinRequest
1786 RT_JOIN_ACTION tmpJoinAction
;
1787 struct ieee80211_network tmpBssDesc
;
1789 // Recored Parameters for rescheduled MgntLinkRequest
1791 bool bTmpActiveScan
;
1792 bool bTmpFilterHiddenAP
;
1793 bool bTmpUpdateParms
;
1795 OCTET_STRING tmpSsid2Scan
;
1798 u8 tmpChannelNumber
;
1802 OCTET_STRING tmpSuppRateSet
;
1803 u8 tmpSuppRateBuf
[MAX_NUM_RATES
];
1809 // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1814 u8 RegMaxLPSAwakeIntvl
;
1823 bool LinkReqInIPSRFOffPgs
;
1824 bool BufConnectinfoBefore
;
1826 }RT_POWER_SAVE_CONTROL
,*PRT_POWER_SAVE_CONTROL
;
1828 typedef u32 RT_RF_CHANGE_SOURCE
;
1829 #define RF_CHANGE_BY_SW BIT31
1830 #define RF_CHANGE_BY_HW BIT30
1831 #define RF_CHANGE_BY_PS BIT29
1832 #define RF_CHANGE_BY_IPS BIT28
1833 #define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1835 #ifdef ENABLE_DOT11D
1838 COUNTRY_CODE_FCC
= 0,
1839 COUNTRY_CODE_IC
= 1,
1840 COUNTRY_CODE_ETSI
= 2,
1841 COUNTRY_CODE_SPAIN
= 3,
1842 COUNTRY_CODE_FRANCE
= 4,
1843 COUNTRY_CODE_MKK
= 5,
1844 COUNTRY_CODE_MKK1
= 6,
1845 COUNTRY_CODE_ISRAEL
= 7,
1848 COUNTRY_CODE_GLOBAL_DOMAIN
1849 }country_code_type_t
;
1852 #define RT_MAX_LD_SLOT_NUM 10
1853 typedef struct _RT_LINK_DETECT_T
{
1855 u32 NumRecvBcnInPeriod
;
1856 u32 NumRecvDataInPeriod
;
1858 u32 RxBcnNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx beacon / CheckForHang_period to determine link status
1859 u32 RxDataNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx data / CheckForHang_period to determine link status
1860 u16 SlotNum
; // number of CheckForHang period to determine link status
1863 u32 NumTxOkInPeriod
;
1864 u32 NumRxOkInPeriod
;
1865 u32 NumRxUnicastOkInPeriod
;
1867 }RT_LINK_DETECT_T
, *PRT_LINK_DETECT_T
;
1869 //added by amy 090330
1870 typedef enum _HW_VARIABLES
{
1872 HW_VAR_MULTICAST_REG
,
1875 HW_VAR_MEDIA_STATUS
,
1876 HW_VAR_SECURITY_CONF
,
1877 HW_VAR_BEACON_INTERVAL
,
1879 HW_VAR_LISTEN_INTERVAL
,
1889 HW_VAR_ACK_PREAMBLE
,
1892 HW_VAR_RATE_FALLBACK_CONTROL
,
1893 HW_VAR_CONTENTION_WINDOW
,
1896 HW_VAR_COMMAND
, // For Command Register, Annie, 2006-04-07.
1897 HW_VAR_WPA_CONFIG
, //2004/08/23, kcwu, for 8187 Security config
1898 HW_VAR_AMPDU_MIN_SPACE
, // The spacing between sub-frame. Roger, 2008.07.04.
1899 HW_VAR_SHORTGI_DENSITY
, // The density for shortGI. Roger, 2008.07.04.
1900 HW_VAR_AMPDU_FACTOR
,
1901 HW_VAR_MCS_RATE_AVAILABLE
,
1902 HW_VAR_AC_PARAM
, // For AC Parameters, 2005.12.01, by rcnjko.
1903 HW_VAR_ACM_CTRL
, // For ACM Control, Annie, 2005-12-13.
1904 HW_VAR_DIS_Req_Qsize
, // For DIS_Reg_Qsize, Joseph
1905 HW_VAR_CCX_CHNL_LOAD
, // For CCX 2 channel load request, 2006.05.04.
1906 HW_VAR_CCX_NOISE_HISTOGRAM
, // For CCX 2 noise histogram request, 2006.05.04.
1907 HW_VAR_CCX_CLM_NHM
, // For CCX 2 parallel channel load request and noise histogram request, 2006.05.12.
1908 HW_VAR_TxOPLimit
, // For turbo mode related settings, added by Roger, 2006.12.07
1909 HW_VAR_TURBO_MODE
, // For turbo mode related settings, added by Roger, 2006.12.15.
1910 HW_VAR_RF_STATE
, // For change or query RF power state, 061214, rcnjko.
1911 HW_VAR_RF_OFF_BY_HW
, // For UI to query if external HW signal disable RF, 061229, rcnjko.
1912 HW_VAR_BUS_SPEED
, // In unit of bps. 2006.07.03, by rcnjko.
1913 HW_VAR_SET_DEV_POWER
, // Set to low power, added by LanHsin, 2007.
1915 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1916 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
1917 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1918 HW_VAR_RCR
, //for RCR, David 2006,05,11
1923 HW_VAR_LBK_MODE
, // Set lookback mode, 2008.06.11. added by Roger.
1924 // Set HW related setting for 11N AES bug.
1926 // Set Usb Rx Aggregation
1928 HW_VAR_USER_CONTROL_TURBO_MODE
,
1930 #ifndef _RTL8192_EXT_PATCH_
1931 HW_VAR_INIT_TX_RATE
, //Get Current Tx rate register. 2008.12.10. Added by tynli
1933 HW_VAR_TX_RATE_REG
, //Get Current Tx rate register. 2008.12.10. Added by tynli
1934 HW_VAR_EFUSE_USAGE
, //Get current EFUSE utilization. 2008.12.19. Added by Roger.
1936 HW_VAR_AUTOLOAD_STATUS
, //Get current autoload status, 0: autoload success, 1: autoload fail. 2008.12.19. Added by Roger.
1937 HW_VAR_RF_2R_DISABLE
, // 2R disable
1939 HW_VAR_H2C_FW_PWRMODE
, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1940 HW_VAR_H2C_FW_JOINBSSRPT
, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1941 HW_VAR_1X1_RECV_COMBINE
, // For 1T2R but only 1SS, Add by hpfan 2009.04.16 hpfan
1942 HW_VAR_STOP_SEND_BEACON
,
1943 HW_VAR_TSF_TIMER
, // Read from TSF register to get the current TSF timer, by Bruce, 2009-07-22.
1945 HW_VAR_HANDLE_FW_C2H
, //Added by tynli. For handling FW C2H command. 2009.10.07.
1946 HW_VAR_DL_FW_RSVD_PAGE
, //Added by tynli. Download the packets that FW will use to RSVD page. 2009.10.14.
1947 HW_VAR_AID
, //Added by tynli.
1948 HW_VAR_HW_SEQ_ENABLE
, //Added by tynli. 2009.10.20.
1949 HW_VAR_UPDATE_TSF
, //Added by tynli. 2009.10.22. For Hw count TBTT time.
1950 HW_VAR_BCN_VALID
, //Added by tynli.
1951 HW_VAR_FWLPS_RF_ON
//Added by tynli. 2009.11.09. For checking if Fw finishs RF on sequence.
1954 #define RT_CHECK_FOR_HANG_PERIOD 2
1956 struct ieee80211_device
{
1957 struct net_device
*dev
;
1958 struct ieee80211_security sec
;
1964 bool bIsAggregateFrame
;
1966 void (*LeisurePSLeave
)(struct net_device
*dev
);
1970 bool proto_stoppping
;
1972 struct semaphore ips_sem
;
1973 struct work_struct ips_leave_wq
;
1974 void (*ieee80211_ips_leave_wq
) (struct net_device
*dev
);
1975 void (*ieee80211_ips_leave
)(struct net_device
*dev
);
1977 void (*SetHwRegHandler
)(struct net_device
*dev
,u8 variable
,u8
* val
);
1978 u8 (*rtllib_ap_sec_type
)(struct ieee80211_device
*ieee
);
1980 //hw security related
1981 // u8 hwsec_support; //support?
1982 u8 hwsec_active
; //hw security active.
1983 bool is_silent_reset
;
1987 bool bSupportRemoteWakeUp
;
1988 RT_PS_MODE dot11PowerSaveMode
; // Power save mode configured.
1991 RT_RF_POWER_STATE eRFPowerState
;
1992 RT_RF_CHANGE_SOURCE RfOffReason
;
1994 //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1997 PRT_HIGH_THROUGHPUT pHTInfo
;
1998 //struct timer_list SwBwTimer;
1999 // spinlock_t chnlop_spinlock;
2000 spinlock_t bw_spinlock
;
2002 spinlock_t reorder_spinlock
;
2003 // for HT operation rate set. we use this one for HT data rate to separate different descriptors
2004 //the way fill this is the same as in the IE
2005 u8 Regdot11HTOperationalRateSet
[16]; //use RATR format
2006 u8 dot11HTOperationalRateSet
[16]; //use RATR format
2007 u8 RegHTSuppRateSet
[16];
2008 u8 HTCurrentOperaRate
;
2009 u8 HTHighestOperaRate
;
2010 //wb added for rate operation mode to firmware
2011 u8 bTxDisableRateFallBack
;
2012 u8 bTxUseDriverAssingedRate
;
2013 atomic_t atm_chnlop
;
2015 // u8 HTHighestOperaRate;
2016 // u8 HTCurrentOperaRate;
2018 // 802.11e and WMM Traffic Stream Info (TX)
2019 struct list_head Tx_TS_Admit_List
;
2020 struct list_head Tx_TS_Pending_List
;
2021 struct list_head Tx_TS_Unused_List
;
2022 TX_TS_RECORD TxTsRecord
[TOTAL_TS_NUM
];
2023 // 802.11e and WMM Traffic Stream Info (RX)
2024 struct list_head Rx_TS_Admit_List
;
2025 struct list_head Rx_TS_Pending_List
;
2026 struct list_head Rx_TS_Unused_List
;
2027 RX_TS_RECORD RxTsRecord
[TOTAL_TS_NUM
];
2029 RX_REORDER_ENTRY RxReorderEntry
[128];
2030 struct list_head RxReorder_Unused_List
;
2032 // Qos related. Added by Annie, 2005-11-01.
2033 // PSTA_QOS pStaQos;
2034 u8 ForcedPriority
; // Force per-packet priority 1~7. (default: 0, not to force it.)
2037 /* Bookkeeping structures */
2038 struct net_device_stats stats
;
2039 struct ieee80211_stats ieee_stats
;
2040 struct ieee80211_softmac_stats softmac_stats
;
2042 /* Probe / Beacon management */
2043 struct list_head network_free_list
;
2044 struct list_head network_list
;
2045 struct ieee80211_network
*networks
;
2049 int iw_mode
; /* operating mode (IW_MODE_*) */
2050 struct iw_spy_data spy_data
;
2053 spinlock_t wpax_suitlist_lock
;
2055 int tx_headroom
; /* Set to size of any additional room needed at front
2056 * of allocated Tx SKBs */
2059 /* WEP and other encryption related settings at the device level */
2060 int open_wep
; /* Set to 1 to allow unencrypted frames */
2062 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
2063 * WEP key changes */
2065 /* If the host performs {en,de}cryption, then set to 1 */
2067 int host_encrypt_msdu
;
2069 /* host performs multicast decryption */
2070 int host_mc_decrypt
;
2072 /* host should strip IV and ICV from protected frames */
2073 /* meaningful only when hardware decryption is being used */
2074 int host_strip_iv_icv
;
2078 int ieee802_1x
; /* is IEEE 802.1X used */
2081 bool bHalfWirelessN24GMode
;
2083 int drop_unencrypted
;
2084 int tkip_countermeasures
;
2085 int privacy_invoked
;
2089 u16 pairwise_key_type
;
2091 struct list_head crypt_deinit_list
;
2092 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
2093 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
2094 struct timer_list crypt_deinit_timer
;
2097 int bcrx_sta_key
; /* use individual keys to override default keys even
2098 * with RX of broad/multicast frames */
2100 /* Fragmentation structures */
2101 // each streaming contain a entry
2102 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
2103 unsigned int frag_next_idx
[17];
2104 u16 fts
; /* Fragmentation Threshold */
2105 #define DEFAULT_RTS_THRESHOLD 2346U
2106 #define MIN_RTS_THRESHOLD 1
2107 #define MAX_RTS_THRESHOLD 2346U
2108 u16 rts
; /* RTS threshold */
2110 /* Association info */
2113 /* This stores infos for the current network.
2114 * Either the network we are associated in INFRASTRUCTURE
2115 * or the network that we are creating in MASTER mode.
2116 * ad-hoc is a mixture ;-).
2117 * Note that in infrastructure mode, even when not associated,
2118 * fields bssid and essid may be valid (if wpa_set and essid_set
2119 * are true) as thy carry the value set by the user via iwconfig
2121 struct ieee80211_network current_network
;
2123 enum ieee80211_state state
;
2127 int mode
; /* A, B, G */
2128 int modulation
; /* CCK, OFDM */
2129 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
2130 int abg_true
; /* ABG flag */
2132 /* used for forcing the ibss workqueue to terminate
2133 * without wait for the syncro scan to terminate
2135 short sync_scan_hurryup
;
2140 u16 prev_seq_ctl
; /* used to drop duplicate frames */
2142 /* map of allowed channels. 0 is dummy */
2143 // FIXME: remeber to default to a basic channel plan depending of the PHY type
2144 #ifdef ENABLE_DOT11D
2148 int channel_map
[MAX_CHANNEL_NUMBER
+1];
2150 int rate
; /* current rate */
2152 //FIXME: pleace callback, see if redundant with softmac_features
2155 /* this contains flags for selectively enable softmac support */
2156 u16 softmac_features
;
2158 /* if the sequence control field is not filled by HW */
2161 /* association procedure transaction sequence number */
2164 /* AID for RTXed association responses */
2167 /* power save mode related*/
2173 struct tasklet_struct ps_task
;
2178 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2181 short proto_started
;
2183 struct semaphore wx_sem
;
2184 struct semaphore scan_sem
;
2186 spinlock_t mgmt_tx_lock
;
2187 spinlock_t beacon_lock
;
2194 u8 wpax_type_set
; //{added by David, 2006.9.28}
2195 u32 wpax_type_notify
; //{added by David, 2006.9.26}
2197 /* QoS related flag */
2198 char init_wmmparam_flag
;
2199 /* set on initialization */
2202 /* for discarding duplicated packets in IBSS */
2203 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
2205 /* for discarding duplicated packets in BSS */
2206 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
2207 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
2208 unsigned long last_packet_time
[17];
2211 unsigned long last_rx_ps_time
;
2213 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2214 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
2215 int mgmt_queue_head
;
2216 int mgmt_queue_tail
;
2217 //{ added for rtl819x
2218 #define IEEE80211_QUEUE_LIMIT 128
2220 unsigned int hw_header
;
2221 struct sk_buff_head skb_waitQ
[MAX_QUEUE_SIZE
];
2222 struct sk_buff_head skb_aggQ
[MAX_QUEUE_SIZE
];
2223 struct sk_buff_head skb_drv_aggQ
[MAX_QUEUE_SIZE
];
2224 u32 sta_edca_param
[4];
2226 // Enable/Disable Rx immediate BA capability.
2227 bool enable_rx_imm_BA
;
2228 bool bibsscoordinator
;
2230 //+by amy for DM ,080515
2231 //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
2232 bool bdynamic_txpower_enable
;
2234 bool bCTSToSelfEnable
;
2237 u32 fsync_time_interval
;
2238 u32 fsync_rate_bitmap
;
2239 u8 fsync_rssi_threshold
;
2242 u8 fsync_multiple_timeinterval
; // FsyncMultipleTimeInterval * FsyncTimeInterval
2243 u32 fsync_firstdiff_ratethreshold
; // low threshold
2244 u32 fsync_seconddiff_ratethreshold
; // decrease threshold
2245 Fsync_State fsync_state
;
2246 bool bis_any_nonbepkts
;
2247 //20Mhz 40Mhz AutoSwitch Threshold
2248 bandwidth_autoswitch bandwidth_auto_switch
;
2249 //for txpower tracking
2252 //added by amy for AP roaming
2253 RT_LINK_DETECT_T LinkDetectInfo
;
2254 //added by amy for ps
2255 RT_POWER_SAVE_CONTROL PowerSaveControl
;
2257 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2258 struct tx_pending_t tx_pending
;
2260 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
2261 struct timer_list associate_timer
;
2263 /* used if IEEE_SOFTMAC_BEACONS is set */
2264 struct timer_list beacon_timer
;
2265 struct work_struct associate_complete_wq
;
2266 struct work_struct associate_procedure_wq
;
2267 struct delayed_work softmac_scan_wq
;
2268 struct delayed_work associate_retry_wq
;
2269 struct delayed_work start_ibss_wq
;
2270 struct delayed_work hw_wakeup_wq
;
2271 struct delayed_work hw_sleep_wq
;
2273 struct work_struct wx_sync_scan_wq
;
2274 struct workqueue_struct
*wq
;
2275 // Qos related. Added by Annie, 2005-11-01.
2278 //u32 STA_EDCA_PARAM[4];
2279 //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2282 /* Callback functions */
2283 void (*set_security
)(struct net_device
*dev
,
2284 struct ieee80211_security
*sec
);
2286 /* Used to TX data frame by using txb structs.
2287 * this is not used if in the softmac_features
2288 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2290 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
2291 struct net_device
*dev
);
2293 int (*reset_port
)(struct net_device
*dev
);
2294 int (*is_queue_full
) (struct net_device
* dev
, int pri
);
2296 int (*handle_management
) (struct net_device
* dev
,
2297 struct ieee80211_network
* network
, u16 type
);
2298 int (*is_qos_active
) (struct net_device
*dev
, struct sk_buff
*skb
);
2300 /* Softmac-generated frames (mamagement) are TXed via this
2301 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2302 * not set. As some cards may have different HW queues that
2303 * one might want to use for data and management frames
2304 * the option to have two callbacks might be useful.
2305 * This fucntion can't sleep.
2307 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
2308 struct net_device
*dev
);
2310 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2311 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2312 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2313 * then also management frames are sent via this callback.
2314 * This function can't sleep.
2316 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
2317 struct net_device
*dev
,int rate
);
2319 /* stops the HW queue for DATA frames. Useful to avoid
2320 * waste time to TX data frame when we are reassociating
2321 * This function can sleep.
2323 void (*data_hard_stop
)(struct net_device
*dev
);
2325 /* OK this is complementar to data_poll_hard_stop */
2326 void (*data_hard_resume
)(struct net_device
*dev
);
2328 /* ask to the driver to retune the radio .
2329 * This function can sleep. the driver should ensure
2330 * the radio has been swithced before return.
2332 void (*set_chan
)(struct net_device
*dev
,short ch
);
2334 /* These are not used if the ieee stack takes care of
2335 * scanning (IEEE_SOFTMAC_SCAN feature set).
2336 * In this case only the set_chan is used.
2338 * The syncro version is similar to the start_scan but
2339 * does not return until all channels has been scanned.
2340 * this is called in user context and should sleep,
2341 * it is called in a work_queue when swithcing to ad-hoc mode
2342 * or in behalf of iwlist scan when the card is associated
2343 * and root user ask for a scan.
2344 * the fucntion stop_scan should stop both the syncro and
2345 * background scanning and can sleep.
2346 * The fucntion start_scan should initiate the background
2347 * scanning and can't sleep.
2349 void (*scan_syncro
)(struct net_device
*dev
);
2350 void (*start_scan
)(struct net_device
*dev
);
2351 void (*stop_scan
)(struct net_device
*dev
);
2353 /* indicate the driver that the link state is changed
2354 * for example it may indicate the card is associated now.
2355 * Driver might be interested in this to apply RX filter
2356 * rules or simply light the LINK led
2358 void (*link_change
)(struct net_device
*dev
);
2360 /* these two function indicates to the HW when to start
2361 * and stop to send beacons. This is used when the
2362 * IEEE_SOFTMAC_BEACONS is not set. For now the
2363 * stop_send_bacons is NOT guaranteed to be called only
2364 * after start_send_beacons.
2366 void (*start_send_beacons
) (struct net_device
*dev
);
2367 void (*stop_send_beacons
) (struct net_device
*dev
);
2369 /* power save mode related */
2370 void (*sta_wake_up
) (struct net_device
*dev
);
2371 // void (*ps_request_tx_ack) (struct net_device *dev);
2372 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
2373 short (*ps_is_queue_empty
) (struct net_device
*dev
);
2375 /* Typical STA methods */
2376 int (*handle_auth
) (struct net_device
* dev
,
2377 struct ieee80211_auth
* auth
);
2378 int (*handle_deauth
) (struct net_device
* dev
,
2379 struct ieee80211_deauth
* auth
);
2380 int (*handle_action
) (struct net_device
* dev
,
2381 struct ieee80211_action
* action
,
2382 struct ieee80211_rx_stats
* stats
);
2383 int (*handle_disassoc
) (struct net_device
* dev
,
2384 struct ieee80211_disassoc
* assoc
);
2386 int (*handle_beacon
) (struct net_device
* dev
, struct ieee80211_beacon
* beacon
, struct ieee80211_network
* network
);
2388 int (*handle_probe_response
) (struct net_device
* dev
,
2389 struct ieee80211_probe_response
* resp
,
2390 struct ieee80211_network
* network
);
2391 int (*handle_probe_request
) (struct net_device
* dev
,
2392 struct ieee80211_probe_request
* req
,
2393 struct ieee80211_rx_stats
* stats
);
2395 int (*handle_assoc_response
) (struct net_device
* dev
, struct ieee80211_assoc_response_frame
* resp
, struct ieee80211_network
* network
);
2398 /* Typical AP methods */
2399 int (*handle_assoc_request
) (struct net_device
* dev
);
2400 int (*handle_reassoc_request
) (struct net_device
* dev
,
2401 struct ieee80211_reassoc_request
* req
);
2404 /* check whether Tx hw resouce available */
2405 short (*check_nic_enough_desc
)(struct net_device
*dev
, int queue_index
);
2406 //added by wb for HT related
2407 // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2408 void (*SetBWModeHandler
)(struct net_device
*dev
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2409 // void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2410 bool (*GetNmodeSupportBySecCfg
)(struct net_device
* dev
);
2411 void (*SetWirelessMode
)(struct net_device
* dev
, u8 wireless_mode
);
2412 bool (*GetHalfNmodeSupportByAPsHandler
)(struct net_device
* dev
);
2413 void (*InitialGainHandler
)(struct net_device
*dev
, u8 Operation
);
2415 /* This must be the last item so that it points to the data
2416 * allocated beyond this structure by alloc_ieee80211 */
2420 #define RT_RF_OFF_LEVL_ASPM BIT0 // PCI ASPM
2421 #define RT_RF_OFF_LEVL_CLK_REQ BIT1 // PCI clock request
2422 #define RT_RF_OFF_LEVL_PCI_D3 BIT2 // PCI D3 mode
2423 #define RT_RF_OFF_LEVL_HALT_NIC BIT3 // NIC halt, re-initialize hw parameters
2424 #define RT_RF_OFF_LEVL_FREE_FW BIT4 // FW free, re-download the FW
2425 #define RT_RF_OFF_LEVL_FW_32K BIT5 // FW in 32k
2426 #define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT6 // Always enable ASPM and Clock Req in initialization.
2427 #define RT_RF_LPS_DISALBE_2R BIT30 // When LPS is on, disable 2R if no packet is received or transmittd.
2428 #define RT_RF_LPS_LEVEL_ASPM BIT31 // LPS with ASPM
2429 #define RT_IN_PS_LEVEL(pPSC, _PS_FLAG) ((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
2430 #define RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel &= (~(_PS_FLAG)))
2431 #define RT_SET_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel |= _PS_FLAG)
2433 #define IEEE_A (1<<0)
2434 #define IEEE_B (1<<1)
2435 #define IEEE_G (1<<2)
2436 #define IEEE_N_24G (1<<4)
2437 #define IEEE_N_5G (1<<5)
2438 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
2440 /* Generate a 802.11 header */
2442 /* Uses the channel change callback directly
2443 * instead of [start/stop] scan callbacks
2445 #define IEEE_SOFTMAC_SCAN (1<<2)
2447 /* Perform authentication and association handshake */
2448 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2450 /* Generate probe requests */
2451 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2453 /* Generate respones to probe requests */
2454 #define IEEE_SOFTMAC_PROBERS (1<<5)
2456 /* The ieee802.11 stack will manages the netif queue
2457 * wake/stop for the driver, taking care of 802.11
2458 * fragmentation. See softmac.c for details. */
2459 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2461 /* Uses only the softmac_data_hard_start_xmit
2462 * even for TX management frames.
2464 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2466 /* Generate beacons. The stack will enqueue beacons
2469 #define IEEE_SOFTMAC_BEACONS (1<<6)
2471 static inline void *ieee80211_priv(struct net_device
*dev
)
2473 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
2476 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
2478 /* Single white space is for Linksys APs */
2479 if (essid_len
== 1 && essid
[0] == ' ')
2482 /* Otherwise, if the entire essid is 0, we assume it is hidden */
2485 if (essid
[essid_len
] != '\0')
2492 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
2495 * It is possible for both access points and our device to support
2496 * combinations of modes, so as long as there is one valid combination
2497 * of ap/device supported modes, then return success
2500 if ((mode
& IEEE_A
) &&
2501 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2502 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
2505 if ((mode
& IEEE_G
) &&
2506 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2507 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2510 if ((mode
& IEEE_B
) &&
2511 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
2512 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2518 extern inline int ieee80211_get_hdrlen(u16 fc
)
2520 int hdrlen
= IEEE80211_3ADDR_LEN
;
2522 switch (WLAN_FC_GET_TYPE(fc
)) {
2523 case IEEE80211_FTYPE_DATA
:
2524 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
2525 hdrlen
= IEEE80211_4ADDR_LEN
; /* Addr4 */
2526 if(IEEE80211_QOS_HAS_SEQ(fc
))
2527 hdrlen
+= 2; /* QOS ctrl*/
2529 case IEEE80211_FTYPE_CTL
:
2530 switch (WLAN_FC_GET_STYPE(fc
)) {
2531 case IEEE80211_STYPE_CTS
:
2532 case IEEE80211_STYPE_ACK
:
2533 hdrlen
= IEEE80211_1ADDR_LEN
;
2536 hdrlen
= IEEE80211_2ADDR_LEN
;
2545 static inline u8
*ieee80211_get_payload(struct ieee80211_hdr
*hdr
)
2547 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr
->frame_ctl
))) {
2548 case IEEE80211_1ADDR_LEN
:
2549 return ((struct ieee80211_hdr_1addr
*)hdr
)->payload
;
2550 case IEEE80211_2ADDR_LEN
:
2551 return ((struct ieee80211_hdr_2addr
*)hdr
)->payload
;
2552 case IEEE80211_3ADDR_LEN
:
2553 return ((struct ieee80211_hdr_3addr
*)hdr
)->payload
;
2554 case IEEE80211_4ADDR_LEN
:
2555 return ((struct ieee80211_hdr_4addr
*)hdr
)->payload
;
2560 static inline int ieee80211_is_ofdm_rate(u8 rate
)
2562 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2563 case IEEE80211_OFDM_RATE_6MB
:
2564 case IEEE80211_OFDM_RATE_9MB
:
2565 case IEEE80211_OFDM_RATE_12MB
:
2566 case IEEE80211_OFDM_RATE_18MB
:
2567 case IEEE80211_OFDM_RATE_24MB
:
2568 case IEEE80211_OFDM_RATE_36MB
:
2569 case IEEE80211_OFDM_RATE_48MB
:
2570 case IEEE80211_OFDM_RATE_54MB
:
2576 static inline int ieee80211_is_cck_rate(u8 rate
)
2578 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2579 case IEEE80211_CCK_RATE_1MB
:
2580 case IEEE80211_CCK_RATE_2MB
:
2581 case IEEE80211_CCK_RATE_5MB
:
2582 case IEEE80211_CCK_RATE_11MB
:
2590 extern void free_ieee80211(struct net_device
*dev
);
2591 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
2593 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
2595 /* ieee80211_tx.c */
2597 extern int ieee80211_encrypt_fragment(
2598 struct ieee80211_device
*ieee
,
2599 struct sk_buff
*frag
,
2602 extern int ieee80211_rtl_xmit(struct sk_buff
*skb
,
2603 struct net_device
*dev
);
2604 extern void ieee80211_txb_free(struct ieee80211_txb
*);
2607 /* ieee80211_rx.c */
2608 extern int ieee80211_rtl_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2609 struct ieee80211_rx_stats
*rx_stats
);
2610 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
2611 struct ieee80211_hdr_4addr
*header
,
2612 struct ieee80211_rx_stats
*stats
);
2614 /* ieee80211_wx.c */
2615 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
2616 struct iw_request_info
*info
,
2617 union iwreq_data
*wrqu
, char *key
);
2618 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
2619 struct iw_request_info
*info
,
2620 union iwreq_data
*wrqu
, char *key
);
2621 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
2622 struct iw_request_info
*info
,
2623 union iwreq_data
*wrqu
, char *key
);
2624 #if WIRELESS_EXT >= 18
2625 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device
*ieee
,
2626 struct iw_request_info
*info
,
2627 union iwreq_data
* wrqu
, char *extra
);
2628 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
2629 struct iw_request_info
*info
,
2630 union iwreq_data
* wrqu
, char *extra
);
2631 extern int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
2632 struct iw_request_info
*info
,
2633 struct iw_param
*data
, char *extra
);
2634 extern int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
2635 struct iw_request_info
*info
,
2636 union iwreq_data
*wrqu
, char *extra
);
2638 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
2640 /* ieee80211_softmac.c */
2641 extern short ieee80211_is_54g(struct ieee80211_network net
);
2642 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
2643 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2644 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
2646 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
2648 void SendDisassociation(struct ieee80211_device
*ieee
, u8
* asSta
, u8 asRsn
);
2649 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
2651 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2652 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2653 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
2654 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
2655 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
2656 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
2657 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
2658 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
2659 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
2660 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
2661 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
2662 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
2663 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
2664 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
2665 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
,u8 shutdown
);
2666 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
2667 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
,u8 shutdown
);
2668 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
2669 extern void ieee80211_rtl_wake_queue(struct ieee80211_device
*ieee
);
2670 extern void ieee80211_rtl_stop_queue(struct ieee80211_device
*ieee
);
2671 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
2672 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
2673 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2674 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
2675 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2676 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
2678 extern void softmac_mgmt_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee
);
2680 /* ieee80211_crypt_ccmp&tkip&wep.c */
2681 extern void ieee80211_tkip_null(void);
2682 extern void ieee80211_wep_null(void);
2683 extern void ieee80211_ccmp_null(void);
2685 /* ieee80211_softmac_wx.c */
2687 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
2688 struct iw_request_info
*info
,
2689 union iwreq_data
*wrqu
, char *ext
);
2691 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
2692 struct iw_request_info
*info
,
2693 union iwreq_data
*awrq
,
2696 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
2698 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
2699 struct iw_request_info
*info
,
2700 union iwreq_data
*wrqu
, char *extra
);
2702 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
2703 struct iw_request_info
*info
,
2704 union iwreq_data
*wrqu
, char *extra
);
2706 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2707 union iwreq_data
*wrqu
, char *b
);
2709 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2710 union iwreq_data
*wrqu
, char *b
);
2712 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
2713 struct iw_request_info
*a
,
2714 union iwreq_data
*wrqu
, char *extra
);
2716 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2717 union iwreq_data
*wrqu
, char *b
);
2719 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2720 union iwreq_data
*wrqu
, char *b
);
2722 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2723 union iwreq_data
*wrqu
, char *b
);
2725 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2726 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
2729 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
2730 struct iw_request_info
*info
,
2731 union iwreq_data
*wrqu
, char *extra
);
2733 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
2734 struct iw_request_info
*info
,
2735 union iwreq_data
*wrqu
, char *extra
);
2737 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
2738 struct iw_request_info
*info
,
2739 union iwreq_data
*wrqu
, char *extra
);
2741 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
2742 struct iw_request_info
*info
,
2743 union iwreq_data
*wrqu
, char *extra
);
2745 extern int ieee80211_wx_set_rts(struct ieee80211_device
*ieee
,
2746 struct iw_request_info
*info
,
2747 union iwreq_data
*wrqu
, char *extra
);
2749 extern int ieee80211_wx_get_rts(struct ieee80211_device
*ieee
,
2750 struct iw_request_info
*info
,
2751 union iwreq_data
*wrqu
, char *extra
);
2753 #define MAX_RECEIVE_BUFFER_SIZE 9100 //
2754 extern void HTDebugHTCapability(u8
* CapIE
, u8
* TitleString
);
2755 extern void HTDebugHTInfo(u8
* InfoIE
, u8
* TitleString
);
2757 void HTSetConnectBwMode(struct ieee80211_device
* ieee
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2758 extern void HTUpdateDefaultSetting(struct ieee80211_device
* ieee
);
2759 extern void HTConstructCapabilityElement(struct ieee80211_device
* ieee
, u8
* posHTCap
, u8
* len
, u8 isEncrypt
);
2760 extern void HTConstructInfoElement(struct ieee80211_device
* ieee
, u8
* posHTInfo
, u8
* len
, u8 isEncrypt
);
2761 extern void HTConstructRT2RTAggElement(struct ieee80211_device
* ieee
, u8
* posRT2RTAgg
, u8
* len
);
2762 extern void HTOnAssocRsp(struct ieee80211_device
*ieee
);
2763 extern void HTInitializeHTInfo(struct ieee80211_device
* ieee
);
2764 extern void HTInitializeBssDesc(PBSS_HT pBssHT
);
2765 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2766 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2767 extern u8
HTGetHighestMCSRate(struct ieee80211_device
* ieee
, u8
* pMCSRateSet
, u8
* pMCSFilter
);
2768 extern u8 MCS_FILTER_ALL
[];
2769 extern u16 MCS_DATA_RATE
[2][2][77] ;
2770 extern u8
HTCCheck(struct ieee80211_device
* ieee
, u8
* pFrame
);
2771 //extern void HTSetConnectBwModeCallback(unsigned long data);
2772 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo
);
2773 extern bool IsHTHalfNmodeAPs(struct ieee80211_device
* ieee
);
2774 extern u16
HTHalfMcsToDataRate(struct ieee80211_device
* ieee
, u8 nMcsRate
);
2775 extern u16
HTMcsToDataRate( struct ieee80211_device
* ieee
, u8 nMcsRate
);
2776 extern u16
TxCountToDataRate( struct ieee80211_device
* ieee
, u8 nDataRate
);
2777 //function in BAPROC.c
2778 extern int ieee80211_rx_ADDBAReq( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2779 extern int ieee80211_rx_ADDBARsp( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2780 extern int ieee80211_rx_DELBA(struct ieee80211_device
* ieee
,struct sk_buff
*skb
);
2781 extern void TsInitAddBA( struct ieee80211_device
* ieee
, PTX_TS_RECORD pTS
, u8 Policy
, u8 bOverwritePending
);
2782 extern void TsInitDelBA( struct ieee80211_device
* ieee
, PTS_COMMON_INFO pTsCommonInfo
, TR_SELECT TxRxSelect
);
2783 extern void BaSetupTimeOut(unsigned long data
);
2784 extern void TxBaInactTimeout(unsigned long data
);
2785 extern void RxBaInactTimeout(unsigned long data
);
2786 extern void ResetBaEntry( PBA_RECORD pBA
);
2789 struct ieee80211_device
* ieee
,
2790 PTS_COMMON_INFO
*ppTS
,
2793 TR_SELECT TxRxSelect
, //Rx:1, Tx:0
2796 extern void TSInitialize(struct ieee80211_device
*ieee
);
2797 extern void TsStartAddBaProcess(struct ieee80211_device
* ieee
, PTX_TS_RECORD pTxTS
);
2798 extern void RemovePeerTS(struct ieee80211_device
* ieee
, u8
* Addr
);
2799 extern void RemoveAllTS(struct ieee80211_device
* ieee
);
2800 void ieee80211_softmac_scan_syncro(struct ieee80211_device
*ieee
);
2802 extern const long ieee80211_wlan_frequencies
[];
2804 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
2809 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
2814 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
2815 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
2816 const char *s
= essid
;
2819 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
2820 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
2824 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
2825 while (essid_len
--) {
2838 /* For the function is more related to hardware setting, it's better to use the
2839 * ieee handler to refer to it.
2841 extern short check_nic_enough_desc(struct net_device
*dev
, int queue_index
);
2842 extern int ieee80211_data_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
2843 extern int ieee80211_parse_info_param(struct ieee80211_device
*ieee
,
2844 struct ieee80211_info_element
*info_element
,
2846 struct ieee80211_network
*network
,
2847 struct ieee80211_rx_stats
*stats
);
2849 void ieee80211_indicate_packets(struct ieee80211_device
*ieee
, struct ieee80211_rxb
** prxbIndicateArray
,u8 index
);
2850 void ieee80211_sta_ps_send_null_frame(struct ieee80211_device
*ieee
, short pwr
);
2851 void ieee80211_sta_ps_send_pspoll_frame(struct ieee80211_device
*ieee
);
2852 #define RT_ASOC_RETRY_LIMIT 5
2853 #endif /* IEEE80211_H */