arch/ppc/platforms/4xx/bubinga.c

   1 /*
   2  * Support for IBM PPC 405EP evaluation board (Bubinga).
   3  *
   4  * Author: SAW (IBM), derived from walnut.c.
   5  *         Maintained by MontaVista Software <source@mvista.com>
   6  *
   7  * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
   8  * terms of the GNU General Public License version 2. This program is
   9  * licensed "as is" without any warranty of any kind, whether express
  10  * or implied.
  11  */
  12
  13 #include <linux/config.h>
  14 #include <linux/init.h>
  15 #include <linux/smp.h>
  16 #include <linux/threads.h>
  17 #include <linux/param.h>
  18 #include <linux/string.h>
  19 #include <linux/blkdev.h>
  20 #include <linux/pci.h>
  21 #include <linux/rtc.h>
  22 #include <linux/tty.h>
  23 #include <linux/serial.h>
  24 #include <linux/serial_core.h>
  25
  26 #include <asm/system.h>
  27 #include <asm/pci-bridge.h>
  28 #include <asm/processor.h>
  29 #include <asm/machdep.h>
  30 #include <asm/page.h>
  31 #include <asm/time.h>
  32 #include <asm/io.h>
  33 #include <asm/todc.h>
  34 #include <asm/kgdb.h>
  35 #include <asm/ocp.h>
  36 #include <asm/ibm_ocp_pci.h>
  37
  38 #include <platforms/4xx/ibm405ep.h>
  39
  40 #undef DEBUG
  41
  42 #ifdef DEBUG
  43 #define DBG(x...) printk(x)
  44 #else
  45 #define DBG(x...)
  46 #endif
  47
  48 extern bd_t __res;
  49
  50 void *bubinga_rtc_base;
  51
  52 /* Some IRQs unique to the board
  53  * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
  54  */
  55 int __init
  56 ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
  57 {
  58         static char pci_irq_table[][4] =
  59             /*
  60              *      PCI IDSEL/INTPIN->INTLINE
  61              *      A       B       C       D
  62              */
  63         {
  64                 {28, 28, 28, 28},       /* IDSEL 1 - PCI slot 1 */
  65                 {29, 29, 29, 29},       /* IDSEL 2 - PCI slot 2 */
  66                 {30, 30, 30, 30},       /* IDSEL 3 - PCI slot 3 */
  67                 {31, 31, 31, 31},       /* IDSEL 4 - PCI slot 4 */
  68         };
  69
  70         const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
  71         return PCI_IRQ_TABLE_LOOKUP;
  72 };
  73
  74 /* The serial clock for the chip is an internal clock determined by
  75  * different clock speeds/dividers.
  76  * Calculate the proper input baud rate and setup the serial driver.
  77  */
  78 static void __init
  79 bubinga_early_serial_map(void)
  80 {
  81         u32 uart_div;
  82         int uart_clock;
  83         struct uart_port port;
  84
  85          /* Calculate the serial clock input frequency
  86           *
  87           * The base baud is the PLL OUTA (provided in the board info
  88           * structure) divided by the external UART Divisor, divided
  89           * by 16.
  90           */
  91         uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
  92         uart_clock = __res.bi_pllouta_freq / uart_div;
  93
  94         /* Setup serial port access */
  95         memset(&port, 0, sizeof(port));
  96         port.membase = (void*)ACTING_UART0_IO_BASE;
  97         port.irq = ACTING_UART0_INT;
  98         port.uartclk = uart_clock;
  99         port.regshift = 0;
 100         port.iotype = SERIAL_IO_MEM;
 101         port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
 102         port.line = 0;
 103
 104         if (early_serial_setup(&port) != 0) {
 105                 printk("Early serial init of port 0 failed\n");
 106         }
 107
 108         port.membase = (void*)ACTING_UART1_IO_BASE;
 109         port.irq = ACTING_UART1_INT;
 110         port.line = 1;
 111
 112         if (early_serial_setup(&port) != 0) {
 113                 printk("Early serial init of port 1 failed\n");
 114         }
 115 }
 116
 117 void __init
 118 bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
 119 {
 120
 121         unsigned int bar_response, bar;
 122         /*
 123          * Expected PCI mapping:
 124          *
 125          *  PLB addr             PCI memory addr
 126          *  ---------------------       ---------------------
 127          *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
 128          *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
 129          *
 130          *  PLB addr             PCI io addr
 131          *  ---------------------       ---------------------
 132          *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
 133          *
 134          * The following code is simplified by assuming that the bootrom
 135          * has been well behaved in following this mapping.
 136          */
 137
 138 #ifdef DEBUG
 139         int i;
 140
 141         printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
 142         printk("PCI bridge regs before fixup \n");
 143         for (i = 0; i <= 3; i++) {
 144                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
 145                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
 146                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
 147                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
 148         }
 149         printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
 150         printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
 151         printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
 152         printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
 153
 154 #endif
 155
 156         /* added for IBM boot rom version 1.15 bios bar changes  -AK */
 157
 158         /* Disable region first */
 159         out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
 160         /* PLB starting addr, PCI: 0x80000000 */
 161         out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
 162         /* PCI start addr, 0x80000000 */
 163         out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
 164         /* 512MB range of PLB to PCI */
 165         out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
 166         /* Enable no pre-fetch, enable region */
 167         out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
 168                                                 (PPC405_PCI_UPPER_MEM -
 169                                                  PPC405_PCI_MEM_BASE)) | 0x01));
 170
 171         /* Disable region one */
 172         out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
 173         out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
 174         out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
 175         out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
 176         out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
 177         out_le32((void *) &(pcip->ptm1ms), 0x00000001);
 178
 179         /* Disable region two */
 180         out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
 181         out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
 182         out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
 183         out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
 184         out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
 185         out_le32((void *) &(pcip->ptm2ms), 0x00000000);
 186         out_le32((void *) &(pcip->ptm2la), 0x00000000);
 187
 188         /* Zero config bars */
 189         for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
 190                 early_write_config_dword(hose, hose->first_busno,
 191                                          PCI_FUNC(hose->first_busno), bar,
 192                                          0x00000000);
 193                 early_read_config_dword(hose, hose->first_busno,
 194                                         PCI_FUNC(hose->first_busno), bar,
 195                                         &bar_response);
 196                 DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
 197                     hose->first_busno, PCI_SLOT(hose->first_busno),
 198                     PCI_FUNC(hose->first_busno), bar, bar_response);
 199         }
 200         /* end work arround */
 201
 202 #ifdef DEBUG
 203         printk("PCI bridge regs after fixup \n");
 204         for (i = 0; i <= 3; i++) {
 205                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
 206                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
 207                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
 208                 printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
 209         }
 210         printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
 211         printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
 212         printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
 213         printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
 214
 215 #endif
 216 }
 217
 218 void __init
 219 bubinga_setup_arch(void)
 220 {
 221         ppc4xx_setup_arch();
 222
 223         ibm_ocp_set_emac(0, 1);
 224
 225         bubinga_early_serial_map();
 226
 227         /* RTC step for the evb405ep */
 228         bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
 229         TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
 230                   bubinga_rtc_base, 8);
 231         /* Identify the system */
 232         printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
 233 }
 234
 235 void __init
 236 bubinga_map_io(void)
 237 {
 238         ppc4xx_map_io();
 239         io_block_mapping(BUBINGA_RTC_VADDR,
 240                          BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
 241 }
 242
 243 void __init
 244 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 245               unsigned long r6, unsigned long r7)
 246 {
 247         ppc4xx_init(r3, r4, r5, r6, r7);
 248
 249         ppc_md.setup_arch = bubinga_setup_arch;
 250         ppc_md.setup_io_mappings = bubinga_map_io;
 251
 252 #ifdef CONFIG_GEN_RTC
 253         ppc_md.time_init = todc_time_init;
 254         ppc_md.set_rtc_time = todc_set_rtc_time;
 255         ppc_md.get_rtc_time = todc_get_rtc_time;
 256         ppc_md.nvram_read_val = todc_direct_read_val;
 257         ppc_md.nvram_write_val = todc_direct_write_val;
 258 #endif
 259 #ifdef CONFIG_KGDB
 260         ppc_md.early_serial_map = bubinga_early_serial_map;
 261 #endif
 262 }
 263