RS485: fix inconsistencies in the meaning of some variables
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ide / cmd640.c
bloba81bd7575792f996763186339b7e3e40c835ce18
1 /*
2 * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
3 */
5 /*
6 * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov)
7 * mlord@pobox.com (Mark Lord)
9 * See linux/MAINTAINERS for address of current maintainer.
11 * This file provides support for the advanced features and bugs
12 * of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
14 * These chips are basically fucked by design, and getting this driver
15 * to work on every motherboard design that uses this screwed chip seems
16 * bloody well impossible. However, we're still trying.
18 * Version 0.97 worked for everybody.
20 * User feedback is essential. Many thanks to the beta test team:
22 * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com,
23 * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz,
24 * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de,
25 * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de,
26 * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net,
27 * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net,
28 * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu,
29 * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com,
30 * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net,
31 * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com
32 * liug@mama.indstate.edu, and others.
34 * Version 0.01 Initial version, hacked out of ide.c,
35 * and #include'd rather than compiled separately.
36 * This will get cleaned up in a subsequent release.
38 * Version 0.02 Fixes for vlb initialization code, enable prefetch
39 * for versions 'B' and 'C' of chip by default,
40 * some code cleanup.
42 * Version 0.03 Added reset of secondary interface,
43 * and black list for devices which are not compatible
44 * with prefetch mode. Separate function for setting
45 * prefetch is added, possibly it will be called some
46 * day from ioctl processing code.
48 * Version 0.04 Now configs/compiles separate from ide.c
50 * Version 0.05 Major rewrite of interface timing code.
51 * Added new function cmd640_set_mode to set PIO mode
52 * from ioctl call. New drives added to black list.
54 * Version 0.06 More code cleanup. Prefetch is enabled only for
55 * detected hard drives, not included in prefetch
56 * black list.
58 * Version 0.07 Changed to more conservative drive tuning policy.
59 * Unknown drives, which report PIO < 4 are set to
60 * (reported_PIO - 1) if it is supported, or to PIO0.
61 * List of known drives extended by info provided by
62 * CMD at their ftp site.
64 * Version 0.08 Added autotune/noautotune support.
66 * Version 0.09 Try to be smarter about 2nd port enabling.
67 * Version 0.10 Be nice and don't reset 2nd port.
68 * Version 0.11 Try to handle more weird situations.
70 * Version 0.12 Lots of bug fixes from Laszlo Peter
71 * irq unmasking disabled for reliability.
72 * try to be even smarter about the second port.
73 * tidy up source code formatting.
74 * Version 0.13 permit irq unmasking again.
75 * Version 0.90 massive code cleanup, some bugs fixed.
76 * defaults all drives to PIO mode0, prefetch off.
77 * autotune is OFF by default, with compile time flag.
78 * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
79 * (requires hdparm-3.1 or newer)
80 * Version 0.91 first release to linux-kernel list.
81 * Version 0.92 move initial reg dump to separate callable function
82 * change "readahead" to "prefetch" to avoid confusion
83 * Version 0.95 respect original BIOS timings unless autotuning.
84 * tons of code cleanup and rearrangement.
85 * added CONFIG_BLK_DEV_CMD640_ENHANCED option
86 * prevent use of unmask when prefetch is on
87 * Version 0.96 prevent use of io_32bit when prefetch is off
88 * Version 0.97 fix VLB secondary interface for sjd@slip.net
89 * other minor tune-ups: 0.96 was very good.
90 * Version 0.98 ignore PCI version when disabled by BIOS
91 * Version 0.99 display setup/active/recovery clocks with PIO mode
92 * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
93 * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
94 * ("fast" is necessary for 32bit I/O in some systems)
95 * Version 1.02 fix bug that resulted in slow "setup times"
96 * (patch courtesy of Zoltan Hidvegi)
99 #define CMD640_PREFETCH_MASKS 1
101 /*#define CMD640_DUMP_REGS */
103 #include <linux/types.h>
104 #include <linux/kernel.h>
105 #include <linux/delay.h>
106 #include <linux/ide.h>
107 #include <linux/init.h>
108 #include <linux/module.h>
110 #include <asm/io.h>
112 #define DRV_NAME "cmd640"
114 static int cmd640_vlb;
117 * CMD640 specific registers definition.
120 #define VID 0x00
121 #define DID 0x02
122 #define PCMD 0x04
123 #define PCMD_ENA 0x01
124 #define PSTTS 0x06
125 #define REVID 0x08
126 #define PROGIF 0x09
127 #define SUBCL 0x0a
128 #define BASCL 0x0b
129 #define BaseA0 0x10
130 #define BaseA1 0x14
131 #define BaseA2 0x18
132 #define BaseA3 0x1c
133 #define INTLINE 0x3c
134 #define INPINE 0x3d
136 #define CFR 0x50
137 #define CFR_DEVREV 0x03
138 #define CFR_IDE01INTR 0x04
139 #define CFR_DEVID 0x18
140 #define CFR_AT_VESA_078h 0x20
141 #define CFR_DSA1 0x40
142 #define CFR_DSA0 0x80
144 #define CNTRL 0x51
145 #define CNTRL_DIS_RA0 0x40
146 #define CNTRL_DIS_RA1 0x80
147 #define CNTRL_ENA_2ND 0x08
149 #define CMDTIM 0x52
150 #define ARTTIM0 0x53
151 #define DRWTIM0 0x54
152 #define ARTTIM1 0x55
153 #define DRWTIM1 0x56
154 #define ARTTIM23 0x57
155 #define ARTTIM23_DIS_RA2 0x04
156 #define ARTTIM23_DIS_RA3 0x08
157 #define ARTTIM23_IDE23INTR 0x10
158 #define DRWTIM23 0x58
159 #define BRST 0x59
162 * Registers and masks for easy access by drive index:
164 static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
165 static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
167 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
169 static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
170 static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
173 * Current cmd640 timing values for each drive.
174 * The defaults for each are the slowest possible timings.
176 static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
177 static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
178 static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
180 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
182 static DEFINE_SPINLOCK(cmd640_lock);
185 * Interface to access cmd640x registers
187 static unsigned int cmd640_key;
188 static void (*__put_cmd640_reg)(u16 reg, u8 val);
189 static u8 (*__get_cmd640_reg)(u16 reg);
192 * This is read from the CFR reg, and is used in several places.
194 static unsigned int cmd640_chip_version;
197 * The CMD640x chip does not support DWORD config write cycles, but some
198 * of the BIOSes use them to implement the config services.
199 * Therefore, we must use direct IO instead.
202 /* PCI method 1 access */
204 static void put_cmd640_reg_pci1(u16 reg, u8 val)
206 outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
207 outb_p(val, (reg & 3) | 0xcfc);
210 static u8 get_cmd640_reg_pci1(u16 reg)
212 outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
213 return inb_p((reg & 3) | 0xcfc);
216 /* PCI method 2 access (from CMD datasheet) */
218 static void put_cmd640_reg_pci2(u16 reg, u8 val)
220 outb_p(0x10, 0xcf8);
221 outb_p(val, cmd640_key + reg);
222 outb_p(0, 0xcf8);
225 static u8 get_cmd640_reg_pci2(u16 reg)
227 u8 b;
229 outb_p(0x10, 0xcf8);
230 b = inb_p(cmd640_key + reg);
231 outb_p(0, 0xcf8);
232 return b;
235 /* VLB access */
237 static void put_cmd640_reg_vlb(u16 reg, u8 val)
239 outb_p(reg, cmd640_key);
240 outb_p(val, cmd640_key + 4);
243 static u8 get_cmd640_reg_vlb(u16 reg)
245 outb_p(reg, cmd640_key);
246 return inb_p(cmd640_key + 4);
249 static u8 get_cmd640_reg(u16 reg)
251 unsigned long flags;
252 u8 b;
254 spin_lock_irqsave(&cmd640_lock, flags);
255 b = __get_cmd640_reg(reg);
256 spin_unlock_irqrestore(&cmd640_lock, flags);
257 return b;
260 static void put_cmd640_reg(u16 reg, u8 val)
262 unsigned long flags;
264 spin_lock_irqsave(&cmd640_lock, flags);
265 __put_cmd640_reg(reg, val);
266 spin_unlock_irqrestore(&cmd640_lock, flags);
269 static int __init match_pci_cmd640_device(void)
271 const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
272 unsigned int i;
273 for (i = 0; i < 4; i++) {
274 if (get_cmd640_reg(i) != ven_dev[i])
275 return 0;
277 #ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
278 if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
279 printk("ide: cmd640 on PCI disabled by BIOS\n");
280 return 0;
282 #endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
283 return 1; /* success */
287 * Probe for CMD640x -- pci method 1
289 static int __init probe_for_cmd640_pci1(void)
291 __get_cmd640_reg = get_cmd640_reg_pci1;
292 __put_cmd640_reg = put_cmd640_reg_pci1;
293 for (cmd640_key = 0x80000000;
294 cmd640_key <= 0x8000f800;
295 cmd640_key += 0x800) {
296 if (match_pci_cmd640_device())
297 return 1; /* success */
299 return 0;
303 * Probe for CMD640x -- pci method 2
305 static int __init probe_for_cmd640_pci2(void)
307 __get_cmd640_reg = get_cmd640_reg_pci2;
308 __put_cmd640_reg = put_cmd640_reg_pci2;
309 for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
310 if (match_pci_cmd640_device())
311 return 1; /* success */
313 return 0;
317 * Probe for CMD640x -- vlb
319 static int __init probe_for_cmd640_vlb(void)
321 u8 b;
323 __get_cmd640_reg = get_cmd640_reg_vlb;
324 __put_cmd640_reg = put_cmd640_reg_vlb;
325 cmd640_key = 0x178;
326 b = get_cmd640_reg(CFR);
327 if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
328 cmd640_key = 0x78;
329 b = get_cmd640_reg(CFR);
330 if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
331 return 0;
333 return 1; /* success */
337 * Returns 1 if an IDE interface/drive exists at 0x170,
338 * Returns 0 otherwise.
340 static int __init secondary_port_responding(void)
342 unsigned long flags;
344 spin_lock_irqsave(&cmd640_lock, flags);
346 outb_p(0x0a, 0x176); /* select drive0 */
347 udelay(100);
348 if ((inb_p(0x176) & 0x1f) != 0x0a) {
349 outb_p(0x1a, 0x176); /* select drive1 */
350 udelay(100);
351 if ((inb_p(0x176) & 0x1f) != 0x1a) {
352 spin_unlock_irqrestore(&cmd640_lock, flags);
353 return 0; /* nothing responded */
356 spin_unlock_irqrestore(&cmd640_lock, flags);
357 return 1; /* success */
360 #ifdef CMD640_DUMP_REGS
362 * Dump out all cmd640 registers. May be called from ide.c
364 static void cmd640_dump_regs(void)
366 unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
368 /* Dump current state of chip registers */
369 printk("ide: cmd640 internal register dump:");
370 for (; reg <= 0x59; reg++) {
371 if (!(reg & 0x0f))
372 printk("\n%04x:", reg);
373 printk(" %02x", get_cmd640_reg(reg));
375 printk("\n");
377 #endif
379 static void __set_prefetch_mode(ide_drive_t *drive, int mode)
381 if (mode) { /* want prefetch on? */
382 #if CMD640_PREFETCH_MASKS
383 drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
384 drive->dev_flags &= ~IDE_DFLAG_UNMASK;
385 #endif
386 drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
387 } else {
388 drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
389 drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
390 drive->io_32bit = 0;
394 #ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
396 * Check whether prefetch is on for a drive,
397 * and initialize the unmask flags for safe operation.
399 static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
401 u8 b = get_cmd640_reg(prefetch_regs[index]);
403 __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);
405 #else
408 * Sets prefetch mode for a drive.
410 static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
412 unsigned long flags;
413 int reg = prefetch_regs[index];
414 u8 b;
416 spin_lock_irqsave(&cmd640_lock, flags);
417 b = __get_cmd640_reg(reg);
418 __set_prefetch_mode(drive, mode);
419 if (mode)
420 b &= ~prefetch_masks[index]; /* enable prefetch */
421 else
422 b |= prefetch_masks[index]; /* disable prefetch */
423 __put_cmd640_reg(reg, b);
424 spin_unlock_irqrestore(&cmd640_lock, flags);
428 * Dump out current drive clocks settings
430 static void display_clocks(unsigned int index)
432 u8 active_count, recovery_count;
434 active_count = active_counts[index];
435 if (active_count == 1)
436 ++active_count;
437 recovery_count = recovery_counts[index];
438 if (active_count > 3 && recovery_count == 1)
439 ++recovery_count;
440 if (cmd640_chip_version > 1)
441 recovery_count += 1; /* cmd640b uses (count + 1)*/
442 printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
446 * Pack active and recovery counts into single byte representation
447 * used by controller
449 static inline u8 pack_nibbles(u8 upper, u8 lower)
451 return ((upper & 0x0f) << 4) | (lower & 0x0f);
455 * This routine writes the prepared setup/active/recovery counts
456 * for a drive into the cmd640 chipset registers to active them.
458 static void program_drive_counts(ide_drive_t *drive, unsigned int index)
460 unsigned long flags;
461 u8 setup_count = setup_counts[index];
462 u8 active_count = active_counts[index];
463 u8 recovery_count = recovery_counts[index];
466 * Set up address setup count and drive read/write timing registers.
467 * Primary interface has individual count/timing registers for
468 * each drive. Secondary interface has one common set of registers,
469 * so we merge the timings, using the slowest value for each timing.
471 if (index > 1) {
472 ide_drive_t *peer = ide_get_pair_dev(drive);
473 unsigned int mate = index ^ 1;
475 if (peer) {
476 if (setup_count < setup_counts[mate])
477 setup_count = setup_counts[mate];
478 if (active_count < active_counts[mate])
479 active_count = active_counts[mate];
480 if (recovery_count < recovery_counts[mate])
481 recovery_count = recovery_counts[mate];
486 * Convert setup_count to internal chipset representation
488 switch (setup_count) {
489 case 4: setup_count = 0x00; break;
490 case 3: setup_count = 0x80; break;
491 case 1:
492 case 2: setup_count = 0x40; break;
493 default: setup_count = 0xc0; /* case 5 */
497 * Now that everything is ready, program the new timings
499 spin_lock_irqsave(&cmd640_lock, flags);
501 * Program the address_setup clocks into ARTTIM reg,
502 * and then the active/recovery counts into the DRWTIM reg
503 * (this converts counts of 16 into counts of zero -- okay).
505 setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
506 __put_cmd640_reg(arttim_regs[index], setup_count);
507 __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
508 spin_unlock_irqrestore(&cmd640_lock, flags);
512 * Set a specific pio_mode for a drive
514 static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
515 u8 pio_mode, unsigned int cycle_time)
517 struct ide_timing *t;
518 int setup_time, active_time, recovery_time, clock_time;
519 u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
520 int bus_speed;
522 if (cmd640_vlb)
523 bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
524 else
525 bus_speed = ide_pci_clk ? ide_pci_clk : 33;
527 if (pio_mode > 5)
528 pio_mode = 5;
530 t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
531 setup_time = t->setup;
532 active_time = t->active;
534 recovery_time = cycle_time - (setup_time + active_time);
535 clock_time = 1000 / bus_speed;
536 cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
538 setup_count = DIV_ROUND_UP(setup_time, clock_time);
540 active_count = DIV_ROUND_UP(active_time, clock_time);
541 if (active_count < 2)
542 active_count = 2; /* minimum allowed by cmd640 */
544 recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
545 recovery_count2 = cycle_count - (setup_count + active_count);
546 if (recovery_count2 > recovery_count)
547 recovery_count = recovery_count2;
548 if (recovery_count < 2)
549 recovery_count = 2; /* minimum allowed by cmd640 */
550 if (recovery_count > 17) {
551 active_count += recovery_count - 17;
552 recovery_count = 17;
554 if (active_count > 16)
555 active_count = 16; /* maximum allowed by cmd640 */
556 if (cmd640_chip_version > 1)
557 recovery_count -= 1; /* cmd640b uses (count + 1)*/
558 if (recovery_count > 16)
559 recovery_count = 16; /* maximum allowed by cmd640 */
561 setup_counts[index] = setup_count;
562 active_counts[index] = active_count;
563 recovery_counts[index] = recovery_count;
566 * In a perfect world, we might set the drive pio mode here
567 * (using WIN_SETFEATURE) before continuing.
569 * But we do not, because:
570 * 1) this is the wrong place to do it (proper is do_special() in ide.c)
571 * 2) in practice this is rarely, if ever, necessary
573 program_drive_counts(drive, index);
576 static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
578 unsigned int index = 0, cycle_time;
579 const u8 pio = drive->pio_mode - XFER_PIO_0;
580 u8 b;
582 switch (pio) {
583 case 6: /* set fast-devsel off */
584 case 7: /* set fast-devsel on */
585 b = get_cmd640_reg(CNTRL) & ~0x27;
586 if (pio & 1)
587 b |= 0x27;
588 put_cmd640_reg(CNTRL, b);
589 printk("%s: %sabled cmd640 fast host timing (devsel)\n",
590 drive->name, (pio & 1) ? "en" : "dis");
591 return;
592 case 8: /* set prefetch off */
593 case 9: /* set prefetch on */
594 set_prefetch_mode(drive, index, pio & 1);
595 printk("%s: %sabled cmd640 prefetch\n",
596 drive->name, (pio & 1) ? "en" : "dis");
597 return;
600 cycle_time = ide_pio_cycle_time(drive, pio);
601 cmd640_set_mode(drive, index, pio, cycle_time);
603 printk("%s: selected cmd640 PIO mode%d (%dns)",
604 drive->name, pio, cycle_time);
606 display_clocks(index);
608 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
610 static void __init cmd640_init_dev(ide_drive_t *drive)
612 unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
614 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
616 * Reset timing to the slowest speed and turn off prefetch.
617 * This way, the drive identify code has a better chance.
619 setup_counts[i] = 4; /* max possible */
620 active_counts[i] = 16; /* max possible */
621 recovery_counts[i] = 16; /* max possible */
622 program_drive_counts(drive, i);
623 set_prefetch_mode(drive, i, 0);
624 printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
625 #else
627 * Set the drive unmask flags to match the prefetch setting.
629 check_prefetch(drive, i);
630 printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
631 i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
632 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
635 static int cmd640_test_irq(ide_hwif_t *hwif)
637 int irq_reg = hwif->channel ? ARTTIM23 : CFR;
638 u8 irq_mask = hwif->channel ? ARTTIM23_IDE23INTR :
639 CFR_IDE01INTR;
640 u8 irq_stat = get_cmd640_reg(irq_reg);
642 return (irq_stat & irq_mask) ? 1 : 0;
645 static const struct ide_port_ops cmd640_port_ops = {
646 .init_dev = cmd640_init_dev,
647 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
648 .set_pio_mode = cmd640_set_pio_mode,
649 #endif
650 .test_irq = cmd640_test_irq,
653 static int pci_conf1(void)
655 unsigned long flags;
656 u32 tmp;
658 spin_lock_irqsave(&cmd640_lock, flags);
659 outb(0x01, 0xCFB);
660 tmp = inl(0xCF8);
661 outl(0x80000000, 0xCF8);
662 if (inl(0xCF8) == 0x80000000) {
663 outl(tmp, 0xCF8);
664 spin_unlock_irqrestore(&cmd640_lock, flags);
665 return 1;
667 outl(tmp, 0xCF8);
668 spin_unlock_irqrestore(&cmd640_lock, flags);
669 return 0;
672 static int pci_conf2(void)
674 unsigned long flags;
676 spin_lock_irqsave(&cmd640_lock, flags);
677 outb(0x00, 0xCFB);
678 outb(0x00, 0xCF8);
679 outb(0x00, 0xCFA);
680 if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
681 spin_unlock_irqrestore(&cmd640_lock, flags);
682 return 1;
684 spin_unlock_irqrestore(&cmd640_lock, flags);
685 return 0;
688 static const struct ide_port_info cmd640_port_info __initdata = {
689 .chipset = ide_cmd640,
690 .host_flags = IDE_HFLAG_SERIALIZE |
691 IDE_HFLAG_NO_DMA |
692 IDE_HFLAG_ABUSE_PREFETCH |
693 IDE_HFLAG_ABUSE_FAST_DEVSEL,
694 .port_ops = &cmd640_port_ops,
695 .pio_mask = ATA_PIO5,
698 static int cmd640x_init_one(unsigned long base, unsigned long ctl)
700 if (!request_region(base, 8, DRV_NAME)) {
701 printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
702 DRV_NAME, base, base + 7);
703 return -EBUSY;
706 if (!request_region(ctl, 1, DRV_NAME)) {
707 printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
708 DRV_NAME, ctl);
709 release_region(base, 8);
710 return -EBUSY;
713 return 0;
717 * Probe for a cmd640 chipset, and initialize it if found.
719 static int __init cmd640x_init(void)
721 int second_port_cmd640 = 0, rc;
722 const char *bus_type, *port2;
723 u8 b, cfr;
724 struct ide_hw hw[2], *hws[2];
726 if (cmd640_vlb && probe_for_cmd640_vlb()) {
727 bus_type = "VLB";
728 } else {
729 cmd640_vlb = 0;
730 /* Find out what kind of PCI probing is supported otherwise
731 Justin Gibbs will sulk.. */
732 if (pci_conf1() && probe_for_cmd640_pci1())
733 bus_type = "PCI (type1)";
734 else if (pci_conf2() && probe_for_cmd640_pci2())
735 bus_type = "PCI (type2)";
736 else
737 return 0;
740 * Undocumented magic (there is no 0x5b reg in specs)
742 put_cmd640_reg(0x5b, 0xbd);
743 if (get_cmd640_reg(0x5b) != 0xbd) {
744 printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
745 return 0;
747 put_cmd640_reg(0x5b, 0);
749 #ifdef CMD640_DUMP_REGS
750 cmd640_dump_regs();
751 #endif
754 * Documented magic begins here
756 cfr = get_cmd640_reg(CFR);
757 cmd640_chip_version = cfr & CFR_DEVREV;
758 if (cmd640_chip_version == 0) {
759 printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
760 return 0;
763 rc = cmd640x_init_one(0x1f0, 0x3f6);
764 if (rc)
765 return rc;
767 rc = cmd640x_init_one(0x170, 0x376);
768 if (rc) {
769 release_region(0x3f6, 1);
770 release_region(0x1f0, 8);
771 return rc;
774 memset(&hw, 0, sizeof(hw));
776 ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
777 hw[0].irq = 14;
779 ide_std_init_ports(&hw[1], 0x170, 0x376);
780 hw[1].irq = 15;
782 printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
783 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
786 * Initialize data for primary port
788 hws[0] = &hw[0];
791 * Ensure compatibility by always using the slowest timings
792 * for access to the drive's command register block,
793 * and reset the prefetch burstsize to default (512 bytes).
795 * Maybe we need a way to NOT do these on *some* systems?
797 put_cmd640_reg(CMDTIM, 0);
798 put_cmd640_reg(BRST, 0x40);
800 b = get_cmd640_reg(CNTRL);
803 * Try to enable the secondary interface, if not already enabled
805 if (secondary_port_responding()) {
806 if ((b & CNTRL_ENA_2ND)) {
807 second_port_cmd640 = 1;
808 port2 = "okay";
809 } else if (cmd640_vlb) {
810 second_port_cmd640 = 1;
811 port2 = "alive";
812 } else
813 port2 = "not cmd640";
814 } else {
815 put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
816 if (secondary_port_responding()) {
817 second_port_cmd640 = 1;
818 port2 = "enabled";
819 } else {
820 put_cmd640_reg(CNTRL, b); /* restore original setting */
821 port2 = "not responding";
826 * Initialize data for secondary cmd640 port, if enabled
828 if (second_port_cmd640)
829 hws[1] = &hw[1];
831 printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
832 second_port_cmd640 ? "" : "not ", port2);
834 #ifdef CMD640_DUMP_REGS
835 cmd640_dump_regs();
836 #endif
838 return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
839 NULL);
842 module_param_named(probe_vlb, cmd640_vlb, bool, 0);
843 MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
845 module_init(cmd640x_init);
847 MODULE_LICENSE("GPL");