iwl3945: remove ucode access indirection
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / video / bfin-lq035q1-fb.c
blobb690c269784afed84839fb76059d3827f4882abb
1 /*
2 * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
4 * Copyright 2008-2009 Analog Devices Inc.
5 * Licensed under the GPL-2 or later.
6 */
8 #define DRIVER_NAME "bfin-lq035q1"
9 #define pr_fmt(fmt) DRIVER_NAME ": " fmt
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/errno.h>
14 #include <linux/string.h>
15 #include <linux/fb.h>
16 #include <linux/init.h>
17 #include <linux/types.h>
18 #include <linux/interrupt.h>
19 #include <linux/device.h>
20 #include <linux/backlight.h>
21 #include <linux/lcd.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/platform_device.h>
24 #include <linux/spi/spi.h>
25 #include <linux/dma-mapping.h>
27 #include <asm/blackfin.h>
28 #include <asm/irq.h>
29 #include <asm/dma.h>
30 #include <asm/portmux.h>
31 #include <asm/gptimers.h>
33 #include <asm/bfin-lq035q1.h>
35 #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
36 #define TIMER_HSYNC_id TIMER1_id
37 #define TIMER_HSYNCbit TIMER1bit
38 #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN1
39 #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1
40 #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF1
42 #define TIMER_VSYNC_id TIMER2_id
43 #define TIMER_VSYNCbit TIMER2bit
44 #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN2
45 #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL2
46 #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF2
47 #else
48 #define TIMER_HSYNC_id TIMER0_id
49 #define TIMER_HSYNCbit TIMER0bit
50 #define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN0
51 #define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL0
52 #define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF0
54 #define TIMER_VSYNC_id TIMER1_id
55 #define TIMER_VSYNCbit TIMER1bit
56 #define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN1
57 #define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1
58 #define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF1
59 #endif
61 #define LCD_X_RES 320 /* Horizontal Resolution */
62 #define LCD_Y_RES 240 /* Vertical Resolution */
63 #define DMA_BUS_SIZE 16
65 #define USE_RGB565_16_BIT_PPI
67 #ifdef USE_RGB565_16_BIT_PPI
68 #define LCD_BPP 16 /* Bit Per Pixel */
69 #define CLOCKS_PER_PIX 1
70 #define CPLD_PIPELINE_DELAY_COR 0 /* NO CPLB */
71 #endif
73 /* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD)
74 * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
77 #ifdef USE_RGB565_8_BIT_PPI
78 #define LCD_BPP 16 /* Bit Per Pixel */
79 #define CLOCKS_PER_PIX 2
80 #define CPLD_PIPELINE_DELAY_COR 3 /* RGB565 */
81 #endif
83 #ifdef USE_RGB888_8_BIT_PPI
84 #define LCD_BPP 24 /* Bit Per Pixel */
85 #define CLOCKS_PER_PIX 3
86 #define CPLD_PIPELINE_DELAY_COR 5 /* RGB888 */
87 #endif
90 * HS and VS timing parameters (all in number of PPI clk ticks)
93 #define U_LINE 4 /* Blanking Lines */
95 #define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
96 #define H_PERIOD (336 * CLOCKS_PER_PIX) /* HS period */
97 #define H_PULSE (2 * CLOCKS_PER_PIX) /* HS pulse width */
98 #define H_START (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR) /* first valid pixel */
100 #define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
101 #define V_PULSE (2 * CLOCKS_PER_PIX) /* VS pulse width (1-5 H_PERIODs) */
102 #define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
104 #define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8))
106 #define BFIN_LCD_NBR_PALETTE_ENTRIES 256
108 #define PPI_TX_MODE 0x2
109 #define PPI_XFER_TYPE_11 0xC
110 #define PPI_PORT_CFG_01 0x10
111 #define PPI_POLS_1 0x8000
113 #if (CLOCKS_PER_PIX > 1)
114 #define PPI_PMODE (DLEN_8 | PACK_EN)
115 #else
116 #define PPI_PMODE (DLEN_16)
117 #endif
119 #define LQ035_INDEX 0x74
120 #define LQ035_DATA 0x76
122 #define LQ035_DRIVER_OUTPUT_CTL 0x1
123 #define LQ035_SHUT_CTL 0x11
125 #define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV)
126 #define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK)
128 #define LQ035_SHUT (1 << 0) /* Shutdown */
129 #define LQ035_ON (0 << 0) /* Shutdown */
131 struct bfin_lq035q1fb_info {
132 struct fb_info *fb;
133 struct device *dev;
134 struct spi_driver spidrv;
135 struct bfin_lq035q1fb_disp_info *disp_info;
136 unsigned char *fb_buffer; /* RGB Buffer */
137 dma_addr_t dma_handle;
138 int lq035_open_cnt;
139 int irq;
140 spinlock_t lock; /* lock */
141 u32 pseudo_pal[16];
144 static int nocursor;
145 module_param(nocursor, int, 0644);
146 MODULE_PARM_DESC(nocursor, "cursor enable/disable");
148 struct spi_control {
149 unsigned short mode;
152 static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value)
154 int ret;
155 u8 regs[3] = { LQ035_INDEX, 0, 0 };
156 u8 dat[3] = { LQ035_DATA, 0, 0 };
158 if (!spi)
159 return -ENODEV;
161 regs[2] = reg;
162 dat[1] = value >> 8;
163 dat[2] = value & 0xFF;
165 ret = spi_write(spi, regs, ARRAY_SIZE(regs));
166 ret |= spi_write(spi, dat, ARRAY_SIZE(dat));
167 return ret;
170 static int __devinit lq035q1_spidev_probe(struct spi_device *spi)
172 int ret;
173 struct spi_control *ctl;
174 struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver,
175 struct bfin_lq035q1fb_info,
176 spidrv.driver);
178 ctl = kzalloc(sizeof(*ctl), GFP_KERNEL);
180 if (!ctl)
181 return -ENOMEM;
183 ctl->mode = (info->disp_info->mode &
184 LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT;
186 ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
187 ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
188 if (ret)
189 return ret;
191 spi_set_drvdata(spi, ctl);
193 return 0;
196 static int lq035q1_spidev_remove(struct spi_device *spi)
198 return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
201 #ifdef CONFIG_PM
202 static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state)
204 return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
207 static int lq035q1_spidev_resume(struct spi_device *spi)
209 int ret;
210 struct spi_control *ctl = spi_get_drvdata(spi);
212 ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
213 if (ret)
214 return ret;
216 return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
218 #else
219 # define lq035q1_spidev_suspend NULL
220 # define lq035q1_spidev_resume NULL
221 #endif
223 /* Power down all displays on reboot, poweroff or halt */
224 static void lq035q1_spidev_shutdown(struct spi_device *spi)
226 lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
229 static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg)
231 if (info->disp_info->use_bl)
232 gpio_set_value(info->disp_info->gpio_bl, arg);
234 return 0;
237 static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi)
239 bfin_write_PPI_DELAY(H_START);
240 bfin_write_PPI_COUNT(H_ACTPIX - 1);
241 bfin_write_PPI_FRAME(V_LINES);
243 bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */
244 PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
245 PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
246 PPI_PMODE | /* 8/16 bit data length / PACK_EN? */
247 PPI_POLS_1); /* faling edge syncs POLS */
250 static inline void bfin_lq035q1_disable_ppi(void)
252 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
255 static inline void bfin_lq035q1_enable_ppi(void)
257 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
260 static void bfin_lq035q1_start_timers(void)
262 enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit);
265 static void bfin_lq035q1_stop_timers(void)
267 disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit);
269 set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN |
270 TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL |
271 TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF);
275 static void bfin_lq035q1_init_timers(void)
278 bfin_lq035q1_stop_timers();
280 set_gptimer_period(TIMER_HSYNC_id, H_PERIOD);
281 set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE);
282 set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
283 TIMER_TIN_SEL | TIMER_CLK_SEL|
284 TIMER_EMU_RUN);
286 set_gptimer_period(TIMER_VSYNC_id, V_PERIOD);
287 set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE);
288 set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
289 TIMER_TIN_SEL | TIMER_CLK_SEL |
290 TIMER_EMU_RUN);
294 static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi)
297 set_dma_config(CH_PPI,
298 set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
299 INTR_DISABLE, DIMENSION_2D,
300 DATA_SIZE_16,
301 DMA_NOSYNC_KEEP_DMA_BUF));
302 set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
303 set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
304 set_dma_y_count(CH_PPI, V_LINES);
306 set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
307 set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
311 #if (CLOCKS_PER_PIX == 1)
312 static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
313 P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
314 P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
315 P_PPI0_D6, P_PPI0_D7, P_PPI0_D8,
316 P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
317 P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
318 P_PPI0_D15, 0};
319 #else
320 static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
321 P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
322 P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
323 P_PPI0_D6, P_PPI0_D7, 0};
324 #endif
326 static inline void bfin_lq035q1_free_ports(void)
328 peripheral_free_list(ppi0_req_16);
329 if (ANOMALY_05000400)
330 gpio_free(P_IDENT(P_PPI0_FS3));
333 static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev)
335 /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode:
336 * Drive PPI_FS3 Low
338 if (ANOMALY_05000400) {
339 int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3");
340 if (ret)
341 return ret;
342 gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
345 if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) {
346 dev_err(&pdev->dev, "requesting peripherals failed\n");
347 return -EFAULT;
350 return 0;
353 static int bfin_lq035q1_fb_open(struct fb_info *info, int user)
355 struct bfin_lq035q1fb_info *fbi = info->par;
357 spin_lock(&fbi->lock);
358 fbi->lq035_open_cnt++;
360 if (fbi->lq035_open_cnt <= 1) {
362 bfin_lq035q1_disable_ppi();
363 SSYNC();
365 bfin_lq035q1_config_dma(fbi);
366 bfin_lq035q1_config_ppi(fbi);
367 bfin_lq035q1_init_timers();
369 /* start dma */
370 enable_dma(CH_PPI);
371 bfin_lq035q1_enable_ppi();
372 bfin_lq035q1_start_timers();
373 lq035q1_backlight(fbi, 1);
376 spin_unlock(&fbi->lock);
378 return 0;
381 static int bfin_lq035q1_fb_release(struct fb_info *info, int user)
383 struct bfin_lq035q1fb_info *fbi = info->par;
385 spin_lock(&fbi->lock);
387 fbi->lq035_open_cnt--;
389 if (fbi->lq035_open_cnt <= 0) {
390 lq035q1_backlight(fbi, 0);
391 bfin_lq035q1_disable_ppi();
392 SSYNC();
393 disable_dma(CH_PPI);
394 bfin_lq035q1_stop_timers();
397 spin_unlock(&fbi->lock);
399 return 0;
402 static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var,
403 struct fb_info *info)
405 switch (var->bits_per_pixel) {
406 #if (LCD_BPP == 24)
407 case 24:/* TRUECOLOUR, 16m */
408 #else
409 case 16:/* DIRECTCOLOUR, 64k */
410 #endif
411 var->red.offset = info->var.red.offset;
412 var->green.offset = info->var.green.offset;
413 var->blue.offset = info->var.blue.offset;
414 var->red.length = info->var.red.length;
415 var->green.length = info->var.green.length;
416 var->blue.length = info->var.blue.length;
417 var->transp.offset = 0;
418 var->transp.length = 0;
419 var->transp.msb_right = 0;
420 var->red.msb_right = 0;
421 var->green.msb_right = 0;
422 var->blue.msb_right = 0;
423 break;
424 default:
425 pr_debug("%s: depth not supported: %u BPP\n", __func__,
426 var->bits_per_pixel);
427 return -EINVAL;
430 if (info->var.xres != var->xres || info->var.yres != var->yres ||
431 info->var.xres_virtual != var->xres_virtual ||
432 info->var.yres_virtual != var->yres_virtual) {
433 pr_debug("%s: Resolution not supported: X%u x Y%u \n",
434 __func__, var->xres, var->yres);
435 return -EINVAL;
439 * Memory limit
442 if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
443 pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
444 __func__, var->yres_virtual);
445 return -ENOMEM;
449 return 0;
452 int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
454 if (nocursor)
455 return 0;
456 else
457 return -EINVAL; /* just to force soft_cursor() call */
460 static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green,
461 u_int blue, u_int transp,
462 struct fb_info *info)
464 if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
465 return -EINVAL;
467 if (info->var.grayscale) {
468 /* grayscale = 0.30*R + 0.59*G + 0.11*B */
469 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
472 if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
474 u32 value;
475 /* Place color in the pseudopalette */
476 if (regno > 16)
477 return -EINVAL;
479 red >>= (16 - info->var.red.length);
480 green >>= (16 - info->var.green.length);
481 blue >>= (16 - info->var.blue.length);
483 value = (red << info->var.red.offset) |
484 (green << info->var.green.offset) |
485 (blue << info->var.blue.offset);
486 value &= 0xFFFFFF;
488 ((u32 *) (info->pseudo_palette))[regno] = value;
492 return 0;
495 static struct fb_ops bfin_lq035q1_fb_ops = {
496 .owner = THIS_MODULE,
497 .fb_open = bfin_lq035q1_fb_open,
498 .fb_release = bfin_lq035q1_fb_release,
499 .fb_check_var = bfin_lq035q1_fb_check_var,
500 .fb_fillrect = cfb_fillrect,
501 .fb_copyarea = cfb_copyarea,
502 .fb_imageblit = cfb_imageblit,
503 .fb_cursor = bfin_lq035q1_fb_cursor,
504 .fb_setcolreg = bfin_lq035q1_fb_setcolreg,
507 static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id)
509 /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/
511 u16 status = bfin_read_PPI_STATUS();
512 bfin_write_PPI_STATUS(-1);
514 if (status) {
515 bfin_lq035q1_disable_ppi();
516 disable_dma(CH_PPI);
518 /* start dma */
519 enable_dma(CH_PPI);
520 bfin_lq035q1_enable_ppi();
521 bfin_write_PPI_STATUS(-1);
524 return IRQ_HANDLED;
527 static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
529 struct bfin_lq035q1fb_info *info;
530 struct fb_info *fbinfo;
531 int ret;
533 ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI");
534 if (ret < 0) {
535 dev_err(&pdev->dev, "PPI DMA unavailable\n");
536 goto out1;
539 fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev);
540 if (!fbinfo) {
541 ret = -ENOMEM;
542 goto out2;
545 info = fbinfo->par;
546 info->fb = fbinfo;
547 info->dev = &pdev->dev;
549 info->disp_info = pdev->dev.platform_data;
551 platform_set_drvdata(pdev, fbinfo);
553 strcpy(fbinfo->fix.id, DRIVER_NAME);
555 fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
556 fbinfo->fix.type_aux = 0;
557 fbinfo->fix.xpanstep = 0;
558 fbinfo->fix.ypanstep = 0;
559 fbinfo->fix.ywrapstep = 0;
560 fbinfo->fix.accel = FB_ACCEL_NONE;
561 fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
563 fbinfo->var.nonstd = 0;
564 fbinfo->var.activate = FB_ACTIVATE_NOW;
565 fbinfo->var.height = -1;
566 fbinfo->var.width = -1;
567 fbinfo->var.accel_flags = 0;
568 fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
570 fbinfo->var.xres = LCD_X_RES;
571 fbinfo->var.xres_virtual = LCD_X_RES;
572 fbinfo->var.yres = LCD_Y_RES;
573 fbinfo->var.yres_virtual = LCD_Y_RES;
574 fbinfo->var.bits_per_pixel = LCD_BPP;
576 if (info->disp_info->mode & LQ035_BGR) {
577 #if (LCD_BPP == 24)
578 fbinfo->var.red.offset = 0;
579 fbinfo->var.green.offset = 8;
580 fbinfo->var.blue.offset = 16;
581 #else
582 fbinfo->var.red.offset = 0;
583 fbinfo->var.green.offset = 5;
584 fbinfo->var.blue.offset = 11;
585 #endif
586 } else {
587 #if (LCD_BPP == 24)
588 fbinfo->var.red.offset = 16;
589 fbinfo->var.green.offset = 8;
590 fbinfo->var.blue.offset = 0;
591 #else
592 fbinfo->var.red.offset = 11;
593 fbinfo->var.green.offset = 5;
594 fbinfo->var.blue.offset = 0;
595 #endif
598 fbinfo->var.transp.offset = 0;
600 #if (LCD_BPP == 24)
601 fbinfo->var.red.length = 8;
602 fbinfo->var.green.length = 8;
603 fbinfo->var.blue.length = 8;
604 #else
605 fbinfo->var.red.length = 5;
606 fbinfo->var.green.length = 6;
607 fbinfo->var.blue.length = 5;
608 #endif
610 fbinfo->var.transp.length = 0;
612 fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8
613 + ACTIVE_VIDEO_MEM_OFFSET;
615 fbinfo->fix.line_length = fbinfo->var.xres_virtual *
616 fbinfo->var.bits_per_pixel / 8;
619 fbinfo->fbops = &bfin_lq035q1_fb_ops;
620 fbinfo->flags = FBINFO_FLAG_DEFAULT;
622 info->fb_buffer =
623 dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
624 GFP_KERNEL);
626 if (NULL == info->fb_buffer) {
627 dev_err(&pdev->dev, "couldn't allocate dma buffer\n");
628 ret = -ENOMEM;
629 goto out3;
632 fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
633 fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
635 fbinfo->fbops = &bfin_lq035q1_fb_ops;
637 fbinfo->pseudo_palette = &info->pseudo_pal;
639 ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0);
640 if (ret < 0) {
641 dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n",
642 BFIN_LCD_NBR_PALETTE_ENTRIES);
643 goto out4;
646 ret = bfin_lq035q1_request_ports(pdev);
647 if (ret) {
648 dev_err(&pdev->dev, "couldn't request gpio port\n");
649 goto out6;
652 info->irq = platform_get_irq(pdev, 0);
653 if (info->irq < 0) {
654 ret = -EINVAL;
655 goto out7;
658 ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED,
659 DRIVER_NAME" PPI ERROR", info);
660 if (ret < 0) {
661 dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n");
662 goto out7;
665 info->spidrv.driver.name = DRIVER_NAME"-spi";
666 info->spidrv.probe = lq035q1_spidev_probe;
667 info->spidrv.remove = __devexit_p(lq035q1_spidev_remove);
668 info->spidrv.shutdown = lq035q1_spidev_shutdown;
669 info->spidrv.suspend = lq035q1_spidev_suspend;
670 info->spidrv.resume = lq035q1_spidev_resume;
672 ret = spi_register_driver(&info->spidrv);
673 if (ret < 0) {
674 dev_err(&pdev->dev, "couldn't register SPI Interface\n");
675 goto out8;
678 if (info->disp_info->use_bl) {
679 ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight");
681 if (ret) {
682 dev_err(&pdev->dev, "failed to request GPIO %d\n",
683 info->disp_info->gpio_bl);
684 goto out9;
686 gpio_direction_output(info->disp_info->gpio_bl, 0);
689 ret = register_framebuffer(fbinfo);
690 if (ret < 0) {
691 dev_err(&pdev->dev, "unable to register framebuffer\n");
692 goto out10;
695 dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n",
696 LCD_X_RES, LCD_Y_RES, LCD_BPP);
698 return 0;
700 out10:
701 if (info->disp_info->use_bl)
702 gpio_free(info->disp_info->gpio_bl);
703 out9:
704 spi_unregister_driver(&info->spidrv);
705 out8:
706 free_irq(info->irq, info);
707 out7:
708 bfin_lq035q1_free_ports();
709 out6:
710 fb_dealloc_cmap(&fbinfo->cmap);
711 out4:
712 dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
713 info->dma_handle);
714 out3:
715 framebuffer_release(fbinfo);
716 out2:
717 free_dma(CH_PPI);
718 out1:
719 platform_set_drvdata(pdev, NULL);
721 return ret;
724 static int __devexit bfin_lq035q1_remove(struct platform_device *pdev)
726 struct fb_info *fbinfo = platform_get_drvdata(pdev);
727 struct bfin_lq035q1fb_info *info = fbinfo->par;
729 if (info->disp_info->use_bl)
730 gpio_free(info->disp_info->gpio_bl);
732 spi_unregister_driver(&info->spidrv);
734 unregister_framebuffer(fbinfo);
736 free_dma(CH_PPI);
737 free_irq(info->irq, info);
739 if (info->fb_buffer != NULL)
740 dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
741 info->dma_handle);
743 fb_dealloc_cmap(&fbinfo->cmap);
745 bfin_lq035q1_free_ports();
747 platform_set_drvdata(pdev, NULL);
748 framebuffer_release(fbinfo);
750 dev_info(&pdev->dev, "unregistered LCD driver\n");
752 return 0;
755 #ifdef CONFIG_PM
756 static int bfin_lq035q1_suspend(struct device *dev)
758 struct fb_info *fbinfo = dev_get_drvdata(dev);
759 struct bfin_lq035q1fb_info *info = fbinfo->par;
761 if (info->lq035_open_cnt) {
762 lq035q1_backlight(info, 0);
763 bfin_lq035q1_disable_ppi();
764 SSYNC();
765 disable_dma(CH_PPI);
766 bfin_lq035q1_stop_timers();
767 bfin_write_PPI_STATUS(-1);
770 return 0;
773 static int bfin_lq035q1_resume(struct device *dev)
775 struct fb_info *fbinfo = dev_get_drvdata(dev);
776 struct bfin_lq035q1fb_info *info = fbinfo->par;
778 if (info->lq035_open_cnt) {
779 bfin_lq035q1_disable_ppi();
780 SSYNC();
782 bfin_lq035q1_config_dma(info);
783 bfin_lq035q1_config_ppi(info);
784 bfin_lq035q1_init_timers();
786 /* start dma */
787 enable_dma(CH_PPI);
788 bfin_lq035q1_enable_ppi();
789 bfin_lq035q1_start_timers();
790 lq035q1_backlight(info, 1);
793 return 0;
796 static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = {
797 .suspend = bfin_lq035q1_suspend,
798 .resume = bfin_lq035q1_resume,
800 #endif
802 static struct platform_driver bfin_lq035q1_driver = {
803 .probe = bfin_lq035q1_probe,
804 .remove = __devexit_p(bfin_lq035q1_remove),
805 .driver = {
806 .name = DRIVER_NAME,
807 #ifdef CONFIG_PM
808 .pm = &bfin_lq035q1_dev_pm_ops,
809 #endif
813 static int __init bfin_lq035q1_driver_init(void)
815 return platform_driver_register(&bfin_lq035q1_driver);
817 module_init(bfin_lq035q1_driver_init);
819 static void __exit bfin_lq035q1_driver_cleanup(void)
821 platform_driver_unregister(&bfin_lq035q1_driver);
823 module_exit(bfin_lq035q1_driver_cleanup);
825 MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
826 MODULE_LICENSE("GPL");