drm: Fix authentication kernel crash
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-omap1 / board-voiceblue.c
blob61ed6cdab2bdb9adbe9af4b8104f2508b902e84d
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
30 #include <mach/hardware.h>
31 #include <mach/system.h>
32 #include <asm/mach-types.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/map.h>
36 #include <plat/board-voiceblue.h>
37 #include <plat/common.h>
38 #include <plat/flash.h>
39 #include <plat/mux.h>
40 #include <plat/tc.h>
41 #include <plat/usb.h>
43 static struct plat_serial8250_port voiceblue_ports[] = {
45 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
46 .irq = OMAP_GPIO_IRQ(12),
47 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
48 .iotype = UPIO_MEM,
49 .regshift = 1,
50 .uartclk = 3686400,
53 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
54 .irq = OMAP_GPIO_IRQ(13),
55 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
56 .iotype = UPIO_MEM,
57 .regshift = 1,
58 .uartclk = 3686400,
61 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
62 .irq = OMAP_GPIO_IRQ(14),
63 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
64 .iotype = UPIO_MEM,
65 .regshift = 1,
66 .uartclk = 3686400,
69 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
70 .irq = OMAP_GPIO_IRQ(15),
71 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
72 .iotype = UPIO_MEM,
73 .regshift = 1,
74 .uartclk = 3686400,
76 { },
79 static struct platform_device serial_device = {
80 .name = "serial8250",
81 .id = PLAT8250_DEV_PLATFORM1,
82 .dev = {
83 .platform_data = voiceblue_ports,
87 static int __init ext_uart_init(void)
89 if (!machine_is_voiceblue())
90 return -ENODEV;
92 return platform_device_register(&serial_device);
94 arch_initcall(ext_uart_init);
96 static struct physmap_flash_data voiceblue_flash_data = {
97 .width = 2,
98 .set_vpp = omap1_set_vpp,
101 static struct resource voiceblue_flash_resource = {
102 .start = OMAP_CS0_PHYS,
103 .end = OMAP_CS0_PHYS + SZ_32M - 1,
104 .flags = IORESOURCE_MEM,
107 static struct platform_device voiceblue_flash_device = {
108 .name = "physmap-flash",
109 .id = 0,
110 .dev = {
111 .platform_data = &voiceblue_flash_data,
113 .num_resources = 1,
114 .resource = &voiceblue_flash_resource,
117 static struct smc91x_platdata voiceblue_smc91x_info = {
118 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
119 .leda = RPC_LED_100_10,
120 .ledb = RPC_LED_TX_RX,
123 static struct resource voiceblue_smc91x_resources[] = {
124 [0] = {
125 .start = OMAP_CS2_PHYS + 0x300,
126 .end = OMAP_CS2_PHYS + 0x300 + 16,
127 .flags = IORESOURCE_MEM,
129 [1] = {
130 .start = OMAP_GPIO_IRQ(8),
131 .end = OMAP_GPIO_IRQ(8),
132 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
136 static struct platform_device voiceblue_smc91x_device = {
137 .name = "smc91x",
138 .id = 0,
139 .dev = {
140 .platform_data = &voiceblue_smc91x_info,
142 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
143 .resource = voiceblue_smc91x_resources,
146 static struct platform_device *voiceblue_devices[] __initdata = {
147 &voiceblue_flash_device,
148 &voiceblue_smc91x_device,
151 static struct omap_usb_config voiceblue_usb_config __initdata = {
152 .hmc_mode = 3,
153 .register_host = 1,
154 .register_dev = 1,
155 .pins[0] = 2,
156 .pins[1] = 6,
157 .pins[2] = 6,
160 static struct omap_board_config_kernel voiceblue_config[] = {
163 #define MACHINE_PANICED 1
164 #define MACHINE_REBOOTING 2
165 #define MACHINE_REBOOT 4
166 static unsigned long machine_state;
168 static int panic_event(struct notifier_block *this, unsigned long event,
169 void *ptr)
171 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
172 return NOTIFY_DONE;
174 /* Flash power LED */
175 omap_writeb(0x78, OMAP_LPG1_LCR);
176 omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
178 return NOTIFY_DONE;
181 static struct notifier_block panic_block = {
182 .notifier_call = panic_event,
185 static int __init voiceblue_setup(void)
187 if (!machine_is_voiceblue())
188 return -ENODEV;
190 /* Setup panic notifier */
191 atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
193 return 0;
195 postcore_initcall(voiceblue_setup);
197 static int wdt_gpio_state;
199 void voiceblue_wdt_enable(void)
201 gpio_direction_output(0, 0);
202 gpio_set_value(0, 1);
203 gpio_set_value(0, 0);
204 wdt_gpio_state = 0;
207 void voiceblue_wdt_disable(void)
209 gpio_set_value(0, 0);
210 gpio_set_value(0, 1);
211 gpio_set_value(0, 0);
212 gpio_direction_input(0);
215 void voiceblue_wdt_ping(void)
217 if (test_bit(MACHINE_REBOOT, &machine_state))
218 return;
220 wdt_gpio_state = !wdt_gpio_state;
221 gpio_set_value(0, wdt_gpio_state);
224 static void voiceblue_reset(char mode, const char *cmd)
227 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
228 * "Global Software Reset Affects Traffic Controller Frequency".
230 if (cpu_is_omap5912()) {
231 omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
232 omap_writew(0x8, ARM_RSTCT1);
235 set_bit(MACHINE_REBOOT, &machine_state);
236 voiceblue_wdt_enable();
237 while (1) ;
240 EXPORT_SYMBOL(voiceblue_wdt_enable);
241 EXPORT_SYMBOL(voiceblue_wdt_disable);
242 EXPORT_SYMBOL(voiceblue_wdt_ping);
244 static void __init voiceblue_init(void)
246 /* mux pins for uarts */
247 omap_cfg_reg(UART1_TX);
248 omap_cfg_reg(UART1_RTS);
249 omap_cfg_reg(UART2_TX);
250 omap_cfg_reg(UART2_RTS);
251 omap_cfg_reg(UART3_TX);
252 omap_cfg_reg(UART3_RX);
254 /* Watchdog */
255 gpio_request(0, "Watchdog");
256 /* smc91x reset */
257 gpio_request(7, "SMC91x reset");
258 gpio_direction_output(7, 1);
259 udelay(2); /* wait at least 100ns */
260 gpio_set_value(7, 0);
261 mdelay(50); /* 50ms until PHY ready */
262 /* smc91x interrupt pin */
263 gpio_request(8, "SMC91x irq");
264 /* 16C554 reset*/
265 gpio_request(6, "16C554 reset");
266 gpio_direction_output(6, 0);
267 /* 16C554 interrupt pins */
268 gpio_request(12, "16C554 irq");
269 gpio_request(13, "16C554 irq");
270 gpio_request(14, "16C554 irq");
271 gpio_request(15, "16C554 irq");
272 irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
273 irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
274 irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
275 irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
277 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
278 omap_board_config = voiceblue_config;
279 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
280 omap_serial_init();
281 omap1_usb_init(&voiceblue_usb_config);
282 omap_register_i2c_bus(1, 100, NULL, 0);
284 /* There is a good chance board is going up, so enable power LED
285 * (it is connected through invertor) */
286 omap_writeb(0x00, OMAP_LPG1_LCR);
287 omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
289 arch_reset = voiceblue_reset;
292 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
293 /* Maintainer: Ladislav Michl <michl@2n.cz> */
294 .atag_offset = 0x100,
295 .map_io = omap15xx_map_io,
296 .init_early = omap1_init_early,
297 .reserve = omap_reserve,
298 .init_irq = omap1_init_irq,
299 .init_machine = voiceblue_init,
300 .timer = &omap1_timer,
301 MACHINE_END