2 * Amiga Buddha, Catweasel and X-Surf IDE Driver
4 * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
6 * This driver was written based on the specifications in README.buddha and
7 * the X-Surf info from Inside_XSurf.txt available at
8 * http://www.jschoenfeld.com
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
16 * - tune the timings using the speed-register
19 #include <linux/types.h>
21 #include <linux/interrupt.h>
22 #include <linux/blkdev.h>
23 #include <linux/zorro.h>
24 #include <linux/ide.h>
25 #include <linux/init.h>
27 #include <asm/amigahw.h>
28 #include <asm/amigaints.h>
32 * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
35 #define BUDDHA_NUM_HWIFS 2
36 #define CATWEASEL_NUM_HWIFS 3
37 #define XSURF_NUM_HWIFS 2
39 #define MAX_NUM_HWIFS 3
42 * Bases of the IDE interfaces (relative to the board address)
45 #define BUDDHA_BASE1 0x800
46 #define BUDDHA_BASE2 0xa00
47 #define BUDDHA_BASE3 0xc00
49 #define XSURF_BASE1 0xb000 /* 2.5" Interface */
50 #define XSURF_BASE2 0xd000 /* 3.5" Interface */
52 static u_int buddha_bases
[CATWEASEL_NUM_HWIFS
] __initdata
= {
53 BUDDHA_BASE1
, BUDDHA_BASE2
, BUDDHA_BASE3
56 static u_int xsurf_bases
[XSURF_NUM_HWIFS
] __initdata
= {
57 XSURF_BASE1
, XSURF_BASE2
61 * Offsets from one of the above bases
64 #define BUDDHA_CONTROL 0x11a
70 #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
71 #define BUDDHA_IRQ2 0xf40 /* interrupt */
72 #define BUDDHA_IRQ3 0xf80
74 #define XSURF_IRQ1 0x7e
75 #define XSURF_IRQ2 0x7e
77 static int buddha_irqports
[CATWEASEL_NUM_HWIFS
] __initdata
= {
78 BUDDHA_IRQ1
, BUDDHA_IRQ2
, BUDDHA_IRQ3
81 static int xsurf_irqports
[XSURF_NUM_HWIFS
] __initdata
= {
82 XSURF_IRQ1
, XSURF_IRQ2
85 #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
92 typedef enum BuddhaType_Enum
{
93 BOARD_BUDDHA
, BOARD_CATWEASEL
, BOARD_XSURF
96 static const char *buddha_board_name
[] = { "Buddha", "Catweasel", "X-Surf" };
99 * Check and acknowledge the interrupt status
102 static int buddha_test_irq(ide_hwif_t
*hwif
)
106 ch
= z_readb(hwif
->io_ports
.irq_addr
);
112 static void xsurf_clear_irq(ide_drive_t
*drive
)
115 * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
117 z_writeb(0, drive
->hwif
->io_ports
.irq_addr
);
120 static void __init
buddha_setup_ports(struct ide_hw
*hw
, unsigned long base
,
121 unsigned long ctl
, unsigned long irq_port
)
125 memset(hw
, 0, sizeof(*hw
));
127 hw
->io_ports
.data_addr
= base
;
129 for (i
= 1; i
< 8; i
++)
130 hw
->io_ports_array
[i
] = base
+ 2 + i
* 4;
132 hw
->io_ports
.ctl_addr
= ctl
;
133 hw
->io_ports
.irq_addr
= irq_port
;
135 hw
->irq
= IRQ_AMIGA_PORTS
;
138 static const struct ide_port_ops buddha_port_ops
= {
139 .test_irq
= buddha_test_irq
,
142 static const struct ide_port_ops xsurf_port_ops
= {
143 .clear_irq
= xsurf_clear_irq
,
144 .test_irq
= buddha_test_irq
,
147 static const struct ide_port_info buddha_port_info
= {
148 .port_ops
= &buddha_port_ops
,
149 .host_flags
= IDE_HFLAG_MMIO
| IDE_HFLAG_NO_DMA
,
150 .irq_flags
= IRQF_SHARED
,
151 .chipset
= ide_generic
,
155 * Probe for a Buddha or Catweasel IDE interface
158 static int __init
buddha_init(void)
160 struct zorro_dev
*z
= NULL
;
161 u_long buddha_board
= 0;
163 int buddha_num_hwifs
, i
;
165 while ((z
= zorro_find_device(ZORRO_WILDCARD
, z
))) {
167 struct ide_hw hw
[MAX_NUM_HWIFS
], *hws
[MAX_NUM_HWIFS
];
168 struct ide_port_info d
= buddha_port_info
;
170 if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA
) {
171 buddha_num_hwifs
= BUDDHA_NUM_HWIFS
;
173 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL
) {
174 buddha_num_hwifs
= CATWEASEL_NUM_HWIFS
;
175 type
=BOARD_CATWEASEL
;
176 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF
) {
177 buddha_num_hwifs
= XSURF_NUM_HWIFS
;
179 d
.port_ops
= &xsurf_port_ops
;
183 board
= z
->resource
.start
;
185 if(type
!= BOARD_XSURF
) {
186 if (!request_mem_region(board
+BUDDHA_BASE1
, 0x800, "IDE"))
189 if (!request_mem_region(board
+XSURF_BASE1
, 0x1000, "IDE"))
191 if (!request_mem_region(board
+XSURF_BASE2
, 0x1000, "IDE"))
193 if (!request_mem_region(board
+XSURF_IRQ1
, 0x8, "IDE")) {
194 release_mem_region(board
+XSURF_BASE2
, 0x1000);
196 release_mem_region(board
+XSURF_BASE1
, 0x1000);
200 buddha_board
= ZTWO_VADDR(board
);
202 /* write to BUDDHA_IRQ_MR to enable the board IRQ */
203 /* X-Surf doesn't have this. IRQs are always on */
204 if (type
!= BOARD_XSURF
)
205 z_writeb(0, buddha_board
+BUDDHA_IRQ_MR
);
207 printk(KERN_INFO
"ide: %s IDE controller\n",
208 buddha_board_name
[type
]);
210 for (i
= 0; i
< buddha_num_hwifs
; i
++) {
211 unsigned long base
, ctl
, irq_port
;
213 if (type
!= BOARD_XSURF
) {
214 base
= buddha_board
+ buddha_bases
[i
];
215 ctl
= base
+ BUDDHA_CONTROL
;
216 irq_port
= buddha_board
+ buddha_irqports
[i
];
218 base
= buddha_board
+ xsurf_bases
[i
];
219 /* X-Surf has no CS1* (Control/AltStat) */
221 irq_port
= buddha_board
+ xsurf_irqports
[i
];
224 buddha_setup_ports(&hw
[i
], base
, ctl
, irq_port
);
229 ide_host_add(&d
, hws
, i
, NULL
);
235 module_init(buddha_init
);
237 MODULE_LICENSE("GPL");