arch/arm/mach-davinci/board-da850-evm.c

   1 /*
   2  * TI DA850/OMAP-L138 EVM board
   3  *
   4  * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
   7  * Original Copyrights follow:
   8  *
   9  * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
  10  * the terms of the GNU General Public License version 2. This program
  11  * is licensed "as is" without any warranty of any kind, whether express
  12  * or implied.
  13  */
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/console.h>
  17 #include <linux/i2c.h>
  18 #include <linux/i2c/at24.h>
  19 #include <linux/i2c/pca953x.h>
  20 #include <linux/gpio.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/mtd/mtd.h>
  23 #include <linux/mtd/nand.h>
  24 #include <linux/mtd/partitions.h>
  25 #include <linux/mtd/physmap.h>
  26 #include <linux/regulator/machine.h>
  27
  28 #include <asm/mach-types.h>
  29 #include <asm/mach/arch.h>
  30
  31 #include <mach/cp_intc.h>
  32 #include <mach/da8xx.h>
  33 #include <mach/nand.h>
  34 #include <mach/mux.h>
  35
  36 #define DA850_EVM_PHY_MASK              0x1
  37 #define DA850_EVM_MDIO_FREQUENCY        2200000 /* PHY bus frequency */
  38
  39 #define DA850_LCD_PWR_PIN               GPIO_TO_PIN(2, 8)
  40 #define DA850_LCD_BL_PIN                GPIO_TO_PIN(2, 15)
  41
  42 #define DA850_MMCSD_CD_PIN              GPIO_TO_PIN(4, 0)
  43 #define DA850_MMCSD_WP_PIN              GPIO_TO_PIN(4, 1)
  44
  45 #define DA850_MII_MDIO_CLKEN_PIN        GPIO_TO_PIN(2, 6)
  46
  47 static struct mtd_partition da850_evm_norflash_partition[] = {
  48         {
  49                 .name           = "bootloaders + env",
  50                 .offset         = 0,
  51                 .size           = SZ_512K,
  52                 .mask_flags     = MTD_WRITEABLE,
  53         },
  54         {
  55                 .name           = "kernel",
  56                 .offset         = MTDPART_OFS_APPEND,
  57                 .size           = SZ_2M,
  58                 .mask_flags     = 0,
  59         },
  60         {
  61                 .name           = "filesystem",
  62                 .offset         = MTDPART_OFS_APPEND,
  63                 .size           = MTDPART_SIZ_FULL,
  64                 .mask_flags     = 0,
  65         },
  66 };
  67
  68 static struct physmap_flash_data da850_evm_norflash_data = {
  69         .width          = 2,
  70         .parts          = da850_evm_norflash_partition,
  71         .nr_parts       = ARRAY_SIZE(da850_evm_norflash_partition),
  72 };
  73
  74 static struct resource da850_evm_norflash_resource[] = {
  75         {
  76                 .start  = DA8XX_AEMIF_CS2_BASE,
  77                 .end    = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
  78                 .flags  = IORESOURCE_MEM,
  79         },
  80 };
  81
  82 static struct platform_device da850_evm_norflash_device = {
  83         .name           = "physmap-flash",
  84         .id             = 0,
  85         .dev            = {
  86                 .platform_data  = &da850_evm_norflash_data,
  87         },
  88         .num_resources  = 1,
  89         .resource       = da850_evm_norflash_resource,
  90 };
  91
  92 static struct davinci_pm_config da850_pm_pdata = {
  93         .sleepcount = 128,
  94 };
  95
  96 static struct platform_device da850_pm_device = {
  97         .name           = "pm-davinci",
  98         .dev = {
  99                 .platform_data  = &da850_pm_pdata,
 100         },
 101         .id             = -1,
 102 };
 103
 104 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
 105  * (128K blocks). It may be used instead of the (default) SPI flash
 106  * to boot, using TI's tools to install the secondary boot loader
 107  * (UBL) and U-Boot.
 108  */
 109 struct mtd_partition da850_evm_nandflash_partition[] = {
 110         {
 111                 .name           = "u-boot env",
 112                 .offset         = 0,
 113                 .size           = SZ_128K,
 114                 .mask_flags     = MTD_WRITEABLE,
 115          },
 116         {
 117                 .name           = "UBL",
 118                 .offset         = MTDPART_OFS_APPEND,
 119                 .size           = SZ_128K,
 120                 .mask_flags     = MTD_WRITEABLE,
 121         },
 122         {
 123                 .name           = "u-boot",
 124                 .offset         = MTDPART_OFS_APPEND,
 125                 .size           = 4 * SZ_128K,
 126                 .mask_flags     = MTD_WRITEABLE,
 127         },
 128         {
 129                 .name           = "kernel",
 130                 .offset         = 0x200000,
 131                 .size           = SZ_2M,
 132                 .mask_flags     = 0,
 133         },
 134         {
 135                 .name           = "filesystem",
 136                 .offset         = MTDPART_OFS_APPEND,
 137                 .size           = MTDPART_SIZ_FULL,
 138                 .mask_flags     = 0,
 139         },
 140 };
 141
 142 static struct davinci_nand_pdata da850_evm_nandflash_data = {
 143         .parts          = da850_evm_nandflash_partition,
 144         .nr_parts       = ARRAY_SIZE(da850_evm_nandflash_partition),
 145         .ecc_mode       = NAND_ECC_HW,
 146         .ecc_bits       = 4,
 147         .options        = NAND_USE_FLASH_BBT,
 148 };
 149
 150 static struct resource da850_evm_nandflash_resource[] = {
 151         {
 152                 .start  = DA8XX_AEMIF_CS3_BASE,
 153                 .end    = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
 154                 .flags  = IORESOURCE_MEM,
 155         },
 156         {
 157                 .start  = DA8XX_AEMIF_CTL_BASE,
 158                 .end    = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
 159                 .flags  = IORESOURCE_MEM,
 160         },
 161 };
 162
 163 static struct platform_device da850_evm_nandflash_device = {
 164         .name           = "davinci_nand",
 165         .id             = 1,
 166         .dev            = {
 167                 .platform_data  = &da850_evm_nandflash_data,
 168         },
 169         .num_resources  = ARRAY_SIZE(da850_evm_nandflash_resource),
 170         .resource       = da850_evm_nandflash_resource,
 171 };
 172
 173 static struct platform_device *da850_evm_devices[] __initdata = {
 174         &da850_evm_nandflash_device,
 175         &da850_evm_norflash_device,
 176 };
 177
 178 #define DA8XX_AEMIF_CE2CFG_OFFSET       0x10
 179 #define DA8XX_AEMIF_ASIZE_16BIT         0x1
 180
 181 static void __init da850_evm_init_nor(void)
 182 {
 183         void __iomem *aemif_addr;
 184
 185         aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
 186
 187         /* Configure data bus width of CS2 to 16 bit */
 188         writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
 189                 DA8XX_AEMIF_ASIZE_16BIT,
 190                 aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
 191
 192         iounmap(aemif_addr);
 193 }
 194
 195 static u32 ui_card_detected;
 196
 197 #if defined(CONFIG_MMC_DAVINCI) || \
 198     defined(CONFIG_MMC_DAVINCI_MODULE)
 199 #define HAS_MMC 1
 200 #else
 201 #define HAS_MMC 0
 202 #endif
 203
 204 static __init void da850_evm_setup_nor_nand(void)
 205 {
 206         int ret = 0;
 207
 208         if (ui_card_detected & !HAS_MMC) {
 209                 ret = da8xx_pinmux_setup(da850_nand_pins);
 210                 if (ret)
 211                         pr_warning("da850_evm_init: nand mux setup failed: "
 212                                         "%d\n", ret);
 213
 214                 ret = da8xx_pinmux_setup(da850_nor_pins);
 215                 if (ret)
 216                         pr_warning("da850_evm_init: nor mux setup failed: %d\n",
 217                                 ret);
 218
 219                 da850_evm_init_nor();
 220
 221                 platform_add_devices(da850_evm_devices,
 222                                         ARRAY_SIZE(da850_evm_devices));
 223         }
 224 }
 225
 226 #ifdef CONFIG_DA850_UI_RMII
 227 static inline void da850_evm_setup_emac_rmii(int rmii_sel)
 228 {
 229         struct davinci_soc_info *soc_info = &davinci_soc_info;
 230
 231         soc_info->emac_pdata->rmii_en = 1;
 232         gpio_set_value(rmii_sel, 0);
 233 }
 234 #else
 235 static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
 236 #endif
 237
 238 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 239                                                 unsigned ngpio, void *c)
 240 {
 241         int sel_a, sel_b, sel_c, ret;
 242
 243         sel_a = gpio + 7;
 244         sel_b = gpio + 6;
 245         sel_c = gpio + 5;
 246
 247         ret = gpio_request(sel_a, "sel_a");
 248         if (ret) {
 249                 pr_warning("Cannot open UI expander pin %d\n", sel_a);
 250                 goto exp_setup_sela_fail;
 251         }
 252
 253         ret = gpio_request(sel_b, "sel_b");
 254         if (ret) {
 255                 pr_warning("Cannot open UI expander pin %d\n", sel_b);
 256                 goto exp_setup_selb_fail;
 257         }
 258
 259         ret = gpio_request(sel_c, "sel_c");
 260         if (ret) {
 261                 pr_warning("Cannot open UI expander pin %d\n", sel_c);
 262                 goto exp_setup_selc_fail;
 263         }
 264
 265         /* deselect all functionalities */
 266         gpio_direction_output(sel_a, 1);
 267         gpio_direction_output(sel_b, 1);
 268         gpio_direction_output(sel_c, 1);
 269
 270         ui_card_detected = 1;
 271         pr_info("DA850/OMAP-L138 EVM UI card detected\n");
 272
 273         da850_evm_setup_nor_nand();
 274
 275         da850_evm_setup_emac_rmii(sel_a);
 276
 277         return 0;
 278
 279 exp_setup_selc_fail:
 280         gpio_free(sel_b);
 281 exp_setup_selb_fail:
 282         gpio_free(sel_a);
 283 exp_setup_sela_fail:
 284         return ret;
 285 }
 286
 287 static int da850_evm_ui_expander_teardown(struct i2c_client *client,
 288                                         unsigned gpio, unsigned ngpio, void *c)
 289 {
 290         /* deselect all functionalities */
 291         gpio_set_value(gpio + 5, 1);
 292         gpio_set_value(gpio + 6, 1);
 293         gpio_set_value(gpio + 7, 1);
 294
 295         gpio_free(gpio + 5);
 296         gpio_free(gpio + 6);
 297         gpio_free(gpio + 7);
 298
 299         return 0;
 300 }
 301
 302 static struct pca953x_platform_data da850_evm_ui_expander_info = {
 303         .gpio_base      = DAVINCI_N_GPIO,
 304         .setup          = da850_evm_ui_expander_setup,
 305         .teardown       = da850_evm_ui_expander_teardown,
 306 };
 307
 308 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 309         {
 310                 I2C_BOARD_INFO("tlv320aic3x", 0x18),
 311         },
 312         {
 313                 I2C_BOARD_INFO("tca6416", 0x20),
 314                 .platform_data = &da850_evm_ui_expander_info,
 315         },
 316 };
 317
 318 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 319         .bus_freq       = 100,  /* kHz */
 320         .bus_delay      = 0,    /* usec */
 321 };
 322
 323 static struct davinci_uart_config da850_evm_uart_config __initdata = {
 324         .enabled_uarts = 0x7,
 325 };
 326
 327 /* davinci da850 evm audio machine driver */
 328 static u8 da850_iis_serializer_direction[] = {
 329         INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,
 330         INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,
 331         INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,  TX_MODE,
 332         RX_MODE,        INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,
 333 };
 334
 335 static struct snd_platform_data da850_evm_snd_data = {
 336         .tx_dma_offset  = 0x2000,
 337         .rx_dma_offset  = 0x2000,
 338         .op_mode        = DAVINCI_MCASP_IIS_MODE,
 339         .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
 340         .tdm_slots      = 2,
 341         .serial_dir     = da850_iis_serializer_direction,
 342         .eventq_no      = EVENTQ_1,
 343         .version        = MCASP_VERSION_2,
 344         .txnumevt       = 1,
 345         .rxnumevt       = 1,
 346 };
 347
 348 static int da850_evm_mmc_get_ro(int index)
 349 {
 350         return gpio_get_value(DA850_MMCSD_WP_PIN);
 351 }
 352
 353 static int da850_evm_mmc_get_cd(int index)
 354 {
 355         return !gpio_get_value(DA850_MMCSD_CD_PIN);
 356 }
 357
 358 static struct davinci_mmc_config da850_mmc_config = {
 359         .get_ro         = da850_evm_mmc_get_ro,
 360         .get_cd         = da850_evm_mmc_get_cd,
 361         .wires          = 4,
 362         .max_freq       = 50000000,
 363         .caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 364         .version        = MMC_CTLR_VERSION_2,
 365 };
 366
 367 static void da850_panel_power_ctrl(int val)
 368 {
 369         /* lcd backlight */
 370         gpio_set_value(DA850_LCD_BL_PIN, val);
 371
 372         /* lcd power */
 373         gpio_set_value(DA850_LCD_PWR_PIN, val);
 374 }
 375
 376 static int da850_lcd_hw_init(void)
 377 {
 378         int status;
 379
 380         status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
 381         if (status < 0)
 382                 return status;
 383
 384         status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
 385         if (status < 0) {
 386                 gpio_free(DA850_LCD_BL_PIN);
 387                 return status;
 388         }
 389
 390         gpio_direction_output(DA850_LCD_BL_PIN, 0);
 391         gpio_direction_output(DA850_LCD_PWR_PIN, 0);
 392
 393         /* Switch off panel power and backlight */
 394         da850_panel_power_ctrl(0);
 395
 396         /* Switch on panel power and backlight */
 397         da850_panel_power_ctrl(1);
 398
 399         return 0;
 400 }
 401
 402 /* TPS65070 voltage regulator support */
 403
 404 /* 3.3V */
 405 struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
 406         {
 407                 .supply = "usb0_vdda33",
 408         },
 409         {
 410                 .supply = "usb1_vdda33",
 411         },
 412 };
 413
 414 /* 3.3V or 1.8V */
 415 struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
 416         {
 417                 .supply = "dvdd3318_a",
 418         },
 419         {
 420                 .supply = "dvdd3318_b",
 421         },
 422         {
 423                 .supply = "dvdd3318_c",
 424         },
 425 };
 426
 427 /* 1.2V */
 428 struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
 429         {
 430                 .supply = "cvdd",
 431         },
 432 };
 433
 434 /* 1.8V LDO */
 435 struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
 436         {
 437                 .supply = "sata_vddr",
 438         },
 439         {
 440                 .supply = "usb0_vdda18",
 441         },
 442         {
 443                 .supply = "usb1_vdda18",
 444         },
 445         {
 446                 .supply = "ddr_dvdd18",
 447         },
 448 };
 449
 450 /* 1.2V LDO */
 451 struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 452         {
 453                 .supply = "sata_vdd",
 454         },
 455         {
 456                 .supply = "pll0_vdda",
 457         },
 458         {
 459                 .supply = "pll1_vdda",
 460         },
 461         {
 462                 .supply = "usbs_cvdd",
 463         },
 464         {
 465                 .supply = "vddarnwa1",
 466         },
 467 };
 468
 469 struct regulator_init_data tps65070_regulator_data[] = {
 470         /* dcdc1 */
 471         {
 472                 .constraints = {
 473                         .min_uV = 3150000,
 474                         .max_uV = 3450000,
 475                         .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 476                                 REGULATOR_CHANGE_STATUS),
 477                         .boot_on = 1,
 478                 },
 479                 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
 480                 .consumer_supplies = tps65070_dcdc1_consumers,
 481         },
 482
 483         /* dcdc2 */
 484         {
 485                 .constraints = {
 486                         .min_uV = 1710000,
 487                         .max_uV = 3450000,
 488                         .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 489                                 REGULATOR_CHANGE_STATUS),
 490                         .boot_on = 1,
 491                 },
 492                 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 493                 .consumer_supplies = tps65070_dcdc2_consumers,
 494         },
 495
 496         /* dcdc3 */
 497         {
 498                 .constraints = {
 499                         .min_uV = 950000,
 500                         .max_uV = 1320000,
 501                         .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 502                                 REGULATOR_CHANGE_STATUS),
 503                         .boot_on = 1,
 504                 },
 505                 .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 506                 .consumer_supplies = tps65070_dcdc3_consumers,
 507         },
 508
 509         /* ldo1 */
 510         {
 511                 .constraints = {
 512                         .min_uV = 1710000,
 513                         .max_uV = 1890000,
 514                         .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 515                                 REGULATOR_CHANGE_STATUS),
 516                         .boot_on = 1,
 517                 },
 518                 .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
 519                 .consumer_supplies = tps65070_ldo1_consumers,
 520         },
 521
 522         /* ldo2 */
 523         {
 524                 .constraints = {
 525                         .min_uV = 1140000,
 526                         .max_uV = 1320000,
 527                         .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 528                                 REGULATOR_CHANGE_STATUS),
 529                         .boot_on = 1,
 530                 },
 531                 .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
 532                 .consumer_supplies = tps65070_ldo2_consumers,
 533         },
 534 };
 535
 536 static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
 537         {
 538                 I2C_BOARD_INFO("tps6507x", 0x48),
 539                 .platform_data = &tps65070_regulator_data[0],
 540         },
 541 };
 542
 543 static int __init pmic_tps65070_init(void)
 544 {
 545         return i2c_register_board_info(1, da850evm_tps65070_info,
 546                                         ARRAY_SIZE(da850evm_tps65070_info));
 547 }
 548
 549 static const short da850_evm_lcdc_pins[] = {
 550         DA850_GPIO2_8, DA850_GPIO2_15,
 551         -1
 552 };
 553
 554 static int __init da850_evm_config_emac(void)
 555 {
 556         void __iomem *cfg_chip3_base;
 557         int ret;
 558         u32 val;
 559         struct davinci_soc_info *soc_info = &davinci_soc_info;
 560         u8 rmii_en = soc_info->emac_pdata->rmii_en;
 561
 562         if (!machine_is_davinci_da850_evm())
 563                 return 0;
 564
 565         cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 566
 567         val = __raw_readl(cfg_chip3_base);
 568
 569         if (rmii_en) {
 570                 val |= BIT(8);
 571                 ret = da8xx_pinmux_setup(da850_rmii_pins);
 572                 pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 573                                                         " functional\n");
 574         } else {
 575                 val &= ~BIT(8);
 576                 ret = da8xx_pinmux_setup(da850_cpgmac_pins);
 577                 pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 578                                                         " functional\n");
 579         }
 580
 581         if (ret)
 582                 pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
 583                                 ret);
 584
 585         /* configure the CFGCHIP3 register for RMII or MII */
 586         __raw_writel(val, cfg_chip3_base);
 587
 588         ret = davinci_cfg_reg(DA850_GPIO2_6);
 589         if (ret)
 590                 pr_warning("da850_evm_init:GPIO(2,6) mux setup "
 591                                                         "failed\n");
 592
 593         ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
 594         if (ret) {
 595                 pr_warning("Cannot open GPIO %d\n",
 596                                         DA850_MII_MDIO_CLKEN_PIN);
 597                 return ret;
 598         }
 599
 600         /* Enable/Disable MII MDIO clock */
 601         gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
 602
 603         soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
 604         soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
 605
 606         ret = da8xx_register_emac();
 607         if (ret)
 608                 pr_warning("da850_evm_init: emac registration failed: %d\n",
 609                                 ret);
 610
 611         return 0;
 612 }
 613 device_initcall(da850_evm_config_emac);
 614
 615 static __init void da850_evm_init(void)
 616 {
 617         int ret;
 618
 619         ret = pmic_tps65070_init();
 620         if (ret)
 621                 pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
 622                                 ret);
 623
 624         ret = da8xx_register_edma();
 625         if (ret)
 626                 pr_warning("da850_evm_init: edma registration failed: %d\n",
 627                                 ret);
 628
 629         ret = da8xx_pinmux_setup(da850_i2c0_pins);
 630         if (ret)
 631                 pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
 632                                 ret);
 633
 634         ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
 635         if (ret)
 636                 pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 637                                 ret);
 638
 639
 640         ret = da8xx_register_watchdog();
 641         if (ret)
 642                 pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 643                                 ret);
 644
 645         if (HAS_MMC) {
 646                 ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
 647                 if (ret)
 648                         pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
 649                                         " %d\n", ret);
 650
 651                 ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
 652                 if (ret)
 653                         pr_warning("da850_evm_init: can not open GPIO %d\n",
 654                                         DA850_MMCSD_CD_PIN);
 655                 gpio_direction_input(DA850_MMCSD_CD_PIN);
 656
 657                 ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
 658                 if (ret)
 659                         pr_warning("da850_evm_init: can not open GPIO %d\n",
 660                                         DA850_MMCSD_WP_PIN);
 661                 gpio_direction_input(DA850_MMCSD_WP_PIN);
 662
 663                 ret = da8xx_register_mmcsd0(&da850_mmc_config);
 664                 if (ret)
 665                         pr_warning("da850_evm_init: mmcsd0 registration failed:"
 666                                         " %d\n", ret);
 667         }
 668
 669         davinci_serial_init(&da850_evm_uart_config);
 670
 671         i2c_register_board_info(1, da850_evm_i2c_devices,
 672                         ARRAY_SIZE(da850_evm_i2c_devices));
 673
 674         /*
 675          * shut down uart 0 and 1; they are not used on the board and
 676          * accessing them causes endless "too much work in irq53" messages
 677          * with arago fs
 678          */
 679         __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 680         __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
 681
 682         ret = da8xx_pinmux_setup(da850_mcasp_pins);
 683         if (ret)
 684                 pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 685                                 ret);
 686
 687         da8xx_register_mcasp(0, &da850_evm_snd_data);
 688
 689         ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
 690         if (ret)
 691                 pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 692                                 ret);
 693
 694         /* Handle board specific muxing for LCD here */
 695         ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
 696         if (ret)
 697                 pr_warning("da850_evm_init: evm specific lcd mux setup "
 698                                 "failed: %d\n", ret);
 699
 700         ret = da850_lcd_hw_init();
 701         if (ret)
 702                 pr_warning("da850_evm_init: lcd initialization failed: %d\n",
 703                                 ret);
 704
 705         sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
 706         ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 707         if (ret)
 708                 pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 709                                 ret);
 710
 711         ret = da8xx_register_rtc();
 712         if (ret)
 713                 pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
 714
 715         ret = da850_register_cpufreq();
 716         if (ret)
 717                 pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
 718                                 ret);
 719
 720         ret = da8xx_register_cpuidle();
 721         if (ret)
 722                 pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
 723                                 ret);
 724
 725         ret = da850_register_pm(&da850_pm_device);
 726         if (ret)
 727                 pr_warning("da850_evm_init: suspend registration failed: %d\n",
 728                                 ret);
 729 }
 730
 731 #ifdef CONFIG_SERIAL_8250_CONSOLE
 732 static int __init da850_evm_console_init(void)
 733 {
 734         return add_preferred_console("ttyS", 2, "115200");
 735 }
 736 console_initcall(da850_evm_console_init);
 737 #endif
 738
 739 static __init void da850_evm_irq_init(void)
 740 {
 741         struct davinci_soc_info *soc_info = &davinci_soc_info;
 742
 743         cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
 744                         soc_info->intc_irq_prios);
 745 }
 746
 747 static void __init da850_evm_map_io(void)
 748 {
 749         da850_init();
 750 }
 751
 752 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
 753         .phys_io        = IO_PHYS,
 754         .io_pg_offst    = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 755         .boot_params    = (DA8XX_DDR_BASE + 0x100),
 756         .map_io         = da850_evm_map_io,
 757         .init_irq       = da850_evm_irq_init,
 758         .timer          = &davinci_timer,
 759         .init_machine   = da850_evm_init,
 760 MACHINE_END