net/wimax/op-msg.c

   1 /*
   2  * Linux WiMAX
   3  * Generic messaging interface between userspace and driver/device
   4  *
   5  *
   6  * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
   7  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License version
  11  * 2 as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  21  * 02110-1301, USA.
  22  *
  23  *
  24  * This implements a direct communication channel between user space and
  25  * the driver/device, by which free form messages can be sent back and
  26  * forth.
  27  *
  28  * This is intended for device-specific features, vendor quirks, etc.
  29  *
  30  * See include/net/wimax.h
  31  *
  32  * GENERIC NETLINK ENCODING AND CAPACITY
  33  *
  34  * A destination "pipe name" is added to each message; it is up to the
  35  * drivers to assign or use those names (if using them at all).
  36  *
  37  * Messages are encoded as a binary netlink attribute using nla_put()
  38  * using type NLA_UNSPEC (as some versions of libnl still in
  39  * deployment don't yet understand NLA_BINARY).
  40  *
  41  * The maximum capacity of this transport is PAGESIZE per message (so
  42  * the actual payload will be bit smaller depending on the
  43  * netlink/generic netlink attributes and headers).
  44  *
  45  * RECEPTION OF MESSAGES
  46  *
  47  * When a message is received from user space, it is passed verbatim
  48  * to the driver calling wimax_dev->op_msg_from_user(). The return
  49  * value from this function is passed back to user space as an ack
  50  * over the generic netlink protocol.
  51  *
  52  * The stack doesn't do any processing or interpretation of these
  53  * messages.
  54  *
  55  * SENDING MESSAGES
  56  *
  57  * Messages can be sent with wimax_msg().
  58  *
  59  * If the message delivery needs to happen on a different context to
  60  * that of its creation, wimax_msg_alloc() can be used to get a
  61  * pointer to the message that can be delivered later on with
  62  * wimax_msg_send().
  63  *
  64  * ROADMAP
  65  *
  66  * wimax_gnl_doit_msg_from_user()    Process a message from user space
  67  *   wimax_dev_get_by_genl_info()
  68  *   wimax_dev->op_msg_from_user()   Delivery of message to the driver
  69  *
  70  * wimax_msg()                       Send a message to user space
  71  *   wimax_msg_alloc()
  72  *   wimax_msg_send()
  73  */
  74 #include <linux/device.h>
  75 #include <net/genetlink.h>
  76 #include <linux/netdevice.h>
  77 #include <linux/wimax.h>
  78 #include <linux/security.h>
  79 #include "wimax-internal.h"
  80
  81
  82 #define D_SUBMODULE op_msg
  83 #include "debug-levels.h"
  84
  85
  86 /**
  87  * wimax_msg_alloc - Create a new skb for sending a message to userspace
  88  *
  89  * @wimax_dev: WiMAX device descriptor
  90  * @pipe_name: "named pipe" the message will be sent to
  91  * @msg: pointer to the message data to send
  92  * @size: size of the message to send (in bytes), including the header.
  93  * @gfp_flags: flags for memory allocation.
  94  *
  95  * Returns: %0 if ok, negative errno code on error
  96  *
  97  * Description:
  98  *
  99  * Allocates an skb that will contain the message to send to user
 100  * space over the messaging pipe and initializes it, copying the
 101  * payload.
 102  *
 103  * Once this call is done, you can deliver it with
 104  * wimax_msg_send().
 105  *
 106  * IMPORTANT:
 107  *
 108  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
 109  * wimax_msg_send() depends on skb->data being placed at the
 110  * beginning of the user message.
 111  */
 112 struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 113                                 const char *pipe_name,
 114                                 const void *msg, size_t size,
 115                                 gfp_t gfp_flags)
 116 {
 117         int result;
 118         struct device *dev = wimax_dev->net_dev->dev.parent;
 119         size_t msg_size;
 120         void *genl_msg;
 121         struct sk_buff *skb;
 122
 123         msg_size = nla_total_size(size)
 124                 + nla_total_size(sizeof(u32))
 125                 + (pipe_name ? nla_total_size(strlen(pipe_name)) : 0);
 126         result = -ENOMEM;
 127         skb = genlmsg_new(msg_size, gfp_flags);
 128         if (skb == NULL)
 129                 goto error_new;
 130         genl_msg = genlmsg_put(skb, 0, 0, &wimax_gnl_family,
 131                                0, WIMAX_GNL_OP_MSG_TO_USER);
 132         if (genl_msg == NULL) {
 133                 dev_err(dev, "no memory to create generic netlink message\n");
 134                 goto error_genlmsg_put;
 135         }
 136         result = nla_put_u32(skb, WIMAX_GNL_MSG_IFIDX,
 137                              wimax_dev->net_dev->ifindex);
 138         if (result < 0) {
 139                 dev_err(dev, "no memory to add ifindex attribute\n");
 140                 goto error_nla_put;
 141         }
 142         if (pipe_name) {
 143                 result = nla_put_string(skb, WIMAX_GNL_MSG_PIPE_NAME,
 144                                         pipe_name);
 145                 if (result < 0) {
 146                         dev_err(dev, "no memory to add pipe_name attribute\n");
 147                         goto error_nla_put;
 148                 }
 149         }
 150         result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg);
 151         if (result < 0) {
 152                 dev_err(dev, "no memory to add payload (msg %p size %zu) in "
 153                         "attribute: %d\n", msg, size, result);
 154                 goto error_nla_put;
 155         }
 156         genlmsg_end(skb, genl_msg);
 157         return skb;
 158
 159 error_nla_put:
 160 error_genlmsg_put:
 161 error_new:
 162         nlmsg_free(skb);
 163         return ERR_PTR(result);
 164
 165 }
 166 EXPORT_SYMBOL_GPL(wimax_msg_alloc);
 167
 168
 169 /**
 170  * wimax_msg_data_len - Return a pointer and size of a message's payload
 171  *
 172  * @msg: Pointer to a message created with wimax_msg_alloc()
 173  * @size: Pointer to where to store the message's size
 174  *
 175  * Returns the pointer to the message data.
 176  */
 177 const void *wimax_msg_data_len(struct sk_buff *msg, size_t *size)
 178 {
 179         struct nlmsghdr *nlh = (void *) msg->head;
 180         struct nlattr *nla;
 181
 182         nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
 183                               WIMAX_GNL_MSG_DATA);
 184         if (nla == NULL) {
 185                 printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
 186                 return NULL;
 187         }
 188         *size = nla_len(nla);
 189         return nla_data(nla);
 190 }
 191 EXPORT_SYMBOL_GPL(wimax_msg_data_len);
 192
 193
 194 /**
 195  * wimax_msg_data - Return a pointer to a message's payload
 196  *
 197  * @msg: Pointer to a message created with wimax_msg_alloc()
 198  */
 199 const void *wimax_msg_data(struct sk_buff *msg)
 200 {
 201         struct nlmsghdr *nlh = (void *) msg->head;
 202         struct nlattr *nla;
 203
 204         nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
 205                               WIMAX_GNL_MSG_DATA);
 206         if (nla == NULL) {
 207                 printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
 208                 return NULL;
 209         }
 210         return nla_data(nla);
 211 }
 212 EXPORT_SYMBOL_GPL(wimax_msg_data);
 213
 214
 215 /**
 216  * wimax_msg_len - Return a message's payload length
 217  *
 218  * @msg: Pointer to a message created with wimax_msg_alloc()
 219  */
 220 ssize_t wimax_msg_len(struct sk_buff *msg)
 221 {
 222         struct nlmsghdr *nlh = (void *) msg->head;
 223         struct nlattr *nla;
 224
 225         nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
 226                               WIMAX_GNL_MSG_DATA);
 227         if (nla == NULL) {
 228                 printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
 229                 return -EINVAL;
 230         }
 231         return nla_len(nla);
 232 }
 233 EXPORT_SYMBOL_GPL(wimax_msg_len);
 234
 235
 236 /**
 237  * wimax_msg_send - Send a pre-allocated message to user space
 238  *
 239  * @wimax_dev: WiMAX device descriptor
 240  *
 241  * @skb: &struct sk_buff returned by wimax_msg_alloc(). Note the
 242  *     ownership of @skb is transferred to this function.
 243  *
 244  * Returns: 0 if ok, < 0 errno code on error
 245  *
 246  * Description:
 247  *
 248  * Sends a free-form message that was preallocated with
 249  * wimax_msg_alloc() and filled up.
 250  *
 251  * Assumes that once you pass an skb to this function for sending, it
 252  * owns it and will release it when done (on success).
 253  *
 254  * IMPORTANT:
 255  *
 256  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
 257  * wimax_msg_send() depends on skb->data being placed at the
 258  * beginning of the user message.
 259  */
 260 int wimax_msg_send(struct wimax_dev *wimax_dev, struct sk_buff *skb)
 261 {
 262         struct device *dev = wimax_dev->net_dev->dev.parent;
 263         void *msg = skb->data;
 264         size_t size = skb->len;
 265         might_sleep();
 266
 267         d_printf(1, dev, "CTX: wimax msg, %zu bytes\n", size);
 268         d_dump(2, dev, msg, size);
 269         genlmsg_multicast(skb, 0, wimax_gnl_mcg.id, GFP_KERNEL);
 270         d_printf(1, dev, "CTX: genl multicast done\n");
 271         return 0;
 272 }
 273 EXPORT_SYMBOL_GPL(wimax_msg_send);
 274
 275
 276 /**
 277  * wimax_msg - Send a message to user space
 278  *
 279  * @wimax_dev: WiMAX device descriptor (properly referenced)
 280  * @pipe_name: "named pipe" the message will be sent to
 281  * @buf: pointer to the message to send.
 282  * @size: size of the buffer pointed to by @buf (in bytes).
 283  * @gfp_flags: flags for memory allocation.
 284  *
 285  * Returns: %0 if ok, negative errno code on error.
 286  *
 287  * Description:
 288  *
 289  * Sends a free-form message to user space on the device @wimax_dev.
 290  *
 291  * NOTES:
 292  *
 293  * Once the @skb is given to this function, who will own it and will
 294  * release it when done (unless it returns error).
 295  */
 296 int wimax_msg(struct wimax_dev *wimax_dev, const char *pipe_name,
 297               const void *buf, size_t size, gfp_t gfp_flags)
 298 {
 299         int result = -ENOMEM;
 300         struct sk_buff *skb;
 301
 302         skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags);
 303         if (IS_ERR(skb))
 304                 result = PTR_ERR(skb);
 305         else
 306                 result = wimax_msg_send(wimax_dev, skb);
 307         return result;
 308 }
 309 EXPORT_SYMBOL_GPL(wimax_msg);
 310
 311
 312 static const
 313 struct nla_policy wimax_gnl_msg_policy[WIMAX_GNL_ATTR_MAX + 1] = {
 314         [WIMAX_GNL_MSG_IFIDX] = {
 315                 .type = NLA_U32,
 316         },
 317         [WIMAX_GNL_MSG_DATA] = {
 318                 .type = NLA_UNSPEC,     /* libnl doesn't grok BINARY yet */
 319         },
 320 };
 321
 322
 323 /*
 324  * Relays a message from user space to the driver
 325  *
 326  * The skb is passed to the driver-specific function with the netlink
 327  * and generic netlink headers already stripped.
 328  *
 329  * This call will block while handling/relaying the message.
 330  */
 331 static
 332 int wimax_gnl_doit_msg_from_user(struct sk_buff *skb, struct genl_info *info)
 333 {
 334         int result, ifindex;
 335         struct wimax_dev *wimax_dev;
 336         struct device *dev;
 337         struct nlmsghdr *nlh = info->nlhdr;
 338         char *pipe_name;
 339         void *msg_buf;
 340         size_t msg_len;
 341
 342         might_sleep();
 343         d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
 344         result = -ENODEV;
 345         if (info->attrs[WIMAX_GNL_MSG_IFIDX] == NULL) {
 346                 printk(KERN_ERR "WIMAX_GNL_MSG_FROM_USER: can't find IFIDX "
 347                        "attribute\n");
 348                 goto error_no_wimax_dev;
 349         }
 350         ifindex = nla_get_u32(info->attrs[WIMAX_GNL_MSG_IFIDX]);
 351         wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
 352         if (wimax_dev == NULL)
 353                 goto error_no_wimax_dev;
 354         dev = wimax_dev_to_dev(wimax_dev);
 355
 356         /* Unpack arguments */
 357         result = -EINVAL;
 358         if (info->attrs[WIMAX_GNL_MSG_DATA] == NULL) {
 359                 dev_err(dev, "WIMAX_GNL_MSG_FROM_USER: can't find MSG_DATA "
 360                         "attribute\n");
 361                 goto error_no_data;
 362         }
 363         msg_buf = nla_data(info->attrs[WIMAX_GNL_MSG_DATA]);
 364         msg_len = nla_len(info->attrs[WIMAX_GNL_MSG_DATA]);
 365
 366         if (info->attrs[WIMAX_GNL_MSG_PIPE_NAME] == NULL)
 367                 pipe_name = NULL;
 368         else {
 369                 struct nlattr *attr = info->attrs[WIMAX_GNL_MSG_PIPE_NAME];
 370                 size_t attr_len = nla_len(attr);
 371                 /* libnl-1.1 does not yet support NLA_NUL_STRING */
 372                 result = -ENOMEM;
 373                 pipe_name = kstrndup(nla_data(attr), attr_len + 1, GFP_KERNEL);
 374                 if (pipe_name == NULL)
 375                         goto error_alloc;
 376                 pipe_name[attr_len] = 0;
 377         }
 378         mutex_lock(&wimax_dev->mutex);
 379         result = wimax_dev_is_ready(wimax_dev);
 380         if (result < 0)
 381                 goto error_not_ready;
 382         result = -ENOSYS;
 383         if (wimax_dev->op_msg_from_user == NULL)
 384                 goto error_noop;
 385
 386         d_printf(1, dev,
 387                  "CRX: nlmsghdr len %u type %u flags 0x%04x seq 0x%x pid %u\n",
 388                  nlh->nlmsg_len, nlh->nlmsg_type, nlh->nlmsg_flags,
 389                  nlh->nlmsg_seq, nlh->nlmsg_pid);
 390         d_printf(1, dev, "CRX: wimax message %zu bytes\n", msg_len);
 391         d_dump(2, dev, msg_buf, msg_len);
 392
 393         result = wimax_dev->op_msg_from_user(wimax_dev, pipe_name,
 394                                              msg_buf, msg_len, info);
 395 error_noop:
 396 error_not_ready:
 397         mutex_unlock(&wimax_dev->mutex);
 398 error_alloc:
 399         kfree(pipe_name);
 400 error_no_data:
 401         dev_put(wimax_dev->net_dev);
 402 error_no_wimax_dev:
 403         d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
 404         return result;
 405 }
 406
 407
 408 /*
 409  * Generic Netlink glue
 410  */
 411
 412 struct genl_ops wimax_gnl_msg_from_user = {
 413         .cmd = WIMAX_GNL_OP_MSG_FROM_USER,
 414         .flags = GENL_ADMIN_PERM,
 415         .policy = wimax_gnl_msg_policy,
 416         .doit = wimax_gnl_doit_msg_from_user,
 417         .dumpit = NULL,
 418 };
 419