ACPI: thinkpad-acpi: preserve radio state across shutdown
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / h8300 / kernel / setup.c
blob7fda657110eb3d7a7cab104dd3d81f1693506526
1 /*
2 * linux/arch/h8300/kernel/setup.c
4 * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
5 * Copyright (C) 1999,2000 Greg Ungerer (gerg@snapgear.com)
6 * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca>
7 * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
8 * Copyright (C) 1995 Hamish Macdonald
9 * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
10 * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
12 * H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
16 * This file handles the architecture-dependent parts of system setup
19 #include <linux/kernel.h>
20 #include <linux/sched.h>
21 #include <linux/delay.h>
22 #include <linux/interrupt.h>
23 #include <linux/mm.h>
24 #include <linux/fs.h>
25 #include <linux/fb.h>
26 #include <linux/console.h>
27 #include <linux/genhd.h>
28 #include <linux/errno.h>
29 #include <linux/string.h>
30 #include <linux/major.h>
31 #include <linux/bootmem.h>
32 #include <linux/seq_file.h>
33 #include <linux/init.h>
35 #include <asm/setup.h>
36 #include <asm/irq.h>
37 #include <asm/pgtable.h>
39 #if defined(__H8300H__)
40 #define CPU "H8/300H"
41 #include <asm/regs306x.h>
42 #endif
44 #if defined(__H8300S__)
45 #define CPU "H8S"
46 #include <asm/regs267x.h>
47 #endif
49 #define STUBSIZE 0xc000;
51 unsigned long rom_length;
52 unsigned long memory_start;
53 unsigned long memory_end;
55 char __initdata command_line[COMMAND_LINE_SIZE];
57 extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
58 extern int _ramstart, _ramend;
59 extern char _target_name[];
60 extern void h8300_gpio_init(void);
62 #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
63 && defined(CONFIG_GDB_MAGICPRINT)
64 /* printk with gdb service */
65 static void gdb_console_output(struct console *c, const char *msg, unsigned len)
67 for (; len > 0; len--) {
68 asm("mov.w %0,r2\n\t"
69 "jsr @0xc4"::"r"(*msg++):"er2");
74 * Setup initial baud/bits/parity. We do two things here:
75 * - construct a cflag setting for the first rs_open()
76 * - initialize the serial port
77 * Return non-zero if we didn't find a serial port.
79 static int __init gdb_console_setup(struct console *co, char *options)
81 return 0;
84 static const struct console gdb_console = {
85 .name = "gdb_con",
86 .write = gdb_console_output,
87 .device = NULL,
88 .setup = gdb_console_setup,
89 .flags = CON_PRINTBUFFER,
90 .index = -1,
92 #endif
94 void __init setup_arch(char **cmdline_p)
96 int bootmap_size;
98 memory_start = (unsigned long) &_ramstart;
100 /* allow for ROMFS on the end of the kernel */
101 if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
102 #if defined(CONFIG_BLK_DEV_INITRD)
103 initrd_start = memory_start;
104 initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
105 #else
106 memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
107 #endif
109 memory_start = PAGE_ALIGN(memory_start);
110 #if !defined(CONFIG_BLKDEV_RESERVE)
111 memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
112 #if defined(CONFIG_GDB_DEBUG)
113 memory_end -= STUBSIZE;
114 #endif
115 #else
116 if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) &&
117 (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
118 /* overlap userarea */
119 memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
120 #endif
122 init_mm.start_code = (unsigned long) &_stext;
123 init_mm.end_code = (unsigned long) &_etext;
124 init_mm.end_data = (unsigned long) &_edata;
125 init_mm.brk = (unsigned long) 0;
127 #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
128 register_console((struct console *)&gdb_console);
129 #endif
131 printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
132 printk(KERN_INFO "Target Hardware: %s\n",_target_name);
133 printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
134 printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
136 #ifdef DEBUG
137 printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
138 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
139 (int) &_sdata, (int) &_edata,
140 (int) &_sbss, (int) &_ebss);
141 printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
142 "STACK=0x%06x-0x%06x\n",
143 (int) &_ebss, (int) memory_start,
144 (int) memory_start, (int) memory_end,
145 (int) memory_end, (int) &_ramend);
146 #endif
148 #ifdef CONFIG_DEFAULT_CMDLINE
149 /* set from default command line */
150 if (*command_line == '\0')
151 strcpy(command_line,CONFIG_KERNEL_COMMAND);
152 #endif
153 /* Keep a copy of command line */
154 *cmdline_p = &command_line[0];
155 memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
156 boot_command_line[COMMAND_LINE_SIZE-1] = 0;
158 #ifdef DEBUG
159 if (strlen(*cmdline_p))
160 printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
161 #endif
164 * give all the memory to the bootmap allocator, tell it to put the
165 * boot mem_map at the start of memory
167 bootmap_size = init_bootmem_node(
168 NODE_DATA(0),
169 memory_start >> PAGE_SHIFT, /* map goes here */
170 PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
171 memory_end >> PAGE_SHIFT);
173 * free the usable memory, we have to make sure we do not free
174 * the bootmem bitmap so we then reserve it after freeing it :-)
176 free_bootmem(memory_start, memory_end - memory_start);
177 reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
179 * get kmalloc into gear
181 paging_init();
182 h8300_gpio_init();
183 #if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
185 #define AREABIT(addr) (1 << (((addr) >> 21) & 7))
186 /* setup BSC */
187 volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
188 volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
189 *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
190 *cscr |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
192 #endif
193 #ifdef DEBUG
194 printk(KERN_DEBUG "Done setup_arch\n");
195 #endif
199 * Get CPU information for use by the procfs.
202 static int show_cpuinfo(struct seq_file *m, void *v)
204 char *cpu;
205 int mode;
206 u_long clockfreq;
208 cpu = CPU;
209 mode = *(volatile unsigned char *)MDCR & 0x07;
211 clockfreq = CONFIG_CPU_CLOCK;
213 seq_printf(m, "CPU:\t\t%s (mode:%d)\n"
214 "Clock:\t\t%lu.%1luMHz\n"
215 "BogoMips:\t%lu.%02lu\n"
216 "Calibration:\t%lu loops\n",
217 cpu,mode,
218 clockfreq/1000,clockfreq%1000,
219 (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
220 (loops_per_jiffy*HZ));
222 return 0;
225 static void *c_start(struct seq_file *m, loff_t *pos)
227 return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
230 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
232 ++*pos;
233 return c_start(m, pos);
236 static void c_stop(struct seq_file *m, void *v)
240 const struct seq_operations cpuinfo_op = {
241 .start = c_start,
242 .next = c_next,
243 .stop = c_stop,
244 .show = show_cpuinfo,