isci: retire scic_sds_ and scic_ prefixes
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / isci / port.h
blob4c4ab8126d9f596dd48a67345a0b6600517bf9ec
1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
5 * GPL LICENSE SUMMARY
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * BSD LICENSE
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56 #ifndef _ISCI_PORT_H_
57 #define _ISCI_PORT_H_
59 #include <scsi/libsas.h>
60 #include "isci.h"
61 #include "sas.h"
62 #include "phy.h"
64 #define SCIC_SDS_DUMMY_PORT 0xFF
66 struct isci_phy;
67 struct isci_host;
69 enum isci_status {
70 isci_freed = 0x00,
71 isci_starting = 0x01,
72 isci_ready = 0x02,
73 isci_ready_for_io = 0x03,
74 isci_stopping = 0x04,
75 isci_stopped = 0x05,
78 /**
79 * struct isci_port - isci direct attached sas port object
80 * @event: counts bcns and port stop events (for bcn filtering)
81 * @ready_exit: several states constitute 'ready'. When exiting ready we
82 * need to take extra port-teardown actions that are
83 * skipped when exiting to another 'ready' state.
84 * @logical_port_index: software port index
85 * @physical_port_index: hardware port index
86 * @active_phy_mask: identifies phy members
87 * @reserved_tag:
88 * @reserved_rni: reserver for port task scheduler workaround
89 * @started_request_count: reference count for outstanding commands
90 * @not_ready_reason: set during state transitions and notified
91 * @timer: timeout start/stop operations
93 struct isci_port {
94 enum isci_status status;
95 #define IPORT_BCN_BLOCKED 0
96 #define IPORT_BCN_PENDING 1
97 unsigned long flags;
98 atomic_t event;
99 struct isci_host *isci_host;
100 struct asd_sas_port sas_port;
101 struct list_head remote_dev_list;
102 spinlock_t state_lock;
103 struct list_head domain_dev_list;
104 struct completion start_complete;
105 struct completion hard_reset_complete;
106 enum sci_status hard_reset_status;
107 struct sci_base_state_machine sm;
108 bool ready_exit;
109 u8 logical_port_index;
110 u8 physical_port_index;
111 u8 active_phy_mask;
112 u16 reserved_rni;
113 u16 reserved_tag;
114 u32 started_request_count;
115 u32 assigned_device_count;
116 u32 not_ready_reason;
117 struct isci_phy *phy_table[SCI_MAX_PHYS];
118 struct isci_host *owning_controller;
119 struct sci_timer timer;
120 struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
121 /* XXX rework: only one register, no need to replicate per-port */
122 u32 __iomem *port_pe_configuration_register;
123 struct scu_viit_entry __iomem *viit_registers;
126 enum sci_port_not_ready_reason_code {
127 SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
128 SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
129 SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
130 SCIC_PORT_NOT_READY_RECONFIGURING,
132 SCIC_PORT_NOT_READY_REASON_CODE_MAX
135 struct sci_port_end_point_properties {
136 struct sci_sas_address sas_address;
137 struct sci_phy_proto protocols;
140 struct sci_port_properties {
141 u32 index;
142 struct sci_port_end_point_properties local;
143 struct sci_port_end_point_properties remote;
144 u32 phy_mask;
148 * enum sci_port_states - This enumeration depicts all the states for the
149 * common port state machine.
153 enum sci_port_states {
155 * This state indicates that the port has successfully been stopped.
156 * In this state no new IO operations are permitted.
157 * This state is entered from the STOPPING state.
159 SCI_PORT_STOPPED,
162 * This state indicates that the port is in the process of stopping.
163 * In this state no new IO operations are permitted, but existing IO
164 * operations are allowed to complete.
165 * This state is entered from the READY state.
167 SCI_PORT_STOPPING,
170 * This state indicates the port is now ready. Thus, the user is
171 * able to perform IO operations on this port.
172 * This state is entered from the STARTING state.
174 SCI_PORT_READY,
177 * The substate where the port is started and ready but has no
178 * active phys.
180 SCI_PORT_SUB_WAITING,
183 * The substate where the port is started and ready and there is
184 * at least one phy operational.
186 SCI_PORT_SUB_OPERATIONAL,
189 * The substate where the port is started and there was an
190 * add/remove phy event. This state is only used in Automatic
191 * Port Configuration Mode (APC)
193 SCI_PORT_SUB_CONFIGURING,
196 * This state indicates the port is in the process of performing a hard
197 * reset. Thus, the user is unable to perform IO operations on this
198 * port.
199 * This state is entered from the READY state.
201 SCI_PORT_RESETTING,
204 * This state indicates the port has failed a reset request. This state
205 * is entered when a port reset request times out.
206 * This state is entered from the RESETTING state.
208 SCI_PORT_FAILED,
214 * sci_port_get_controller() -
216 * Helper macro to get the owning controller of this port
218 #define sci_port_get_controller(this_port) \
219 ((this_port)->owning_controller)
222 * sci_port_get_index() -
224 * This macro returns the physical port index for this port object
226 #define sci_port_get_index(this_port) \
227 ((this_port)->physical_port_index)
230 static inline void sci_port_decrement_request_count(struct isci_port *iport)
232 if (WARN_ONCE(iport->started_request_count == 0,
233 "%s: tried to decrement started_request_count past 0!?",
234 __func__))
235 /* pass */;
236 else
237 iport->started_request_count--;
240 #define sci_port_active_phy(port, phy) \
241 (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
243 void sci_port_construct(
244 struct isci_port *iport,
245 u8 port_index,
246 struct isci_host *ihost);
248 enum sci_status sci_port_start(struct isci_port *iport);
249 enum sci_status sci_port_stop(struct isci_port *iport);
251 enum sci_status sci_port_add_phy(
252 struct isci_port *iport,
253 struct isci_phy *iphy);
255 enum sci_status sci_port_remove_phy(
256 struct isci_port *iport,
257 struct isci_phy *iphy);
259 void sci_port_setup_transports(
260 struct isci_port *iport,
261 u32 device_id);
263 void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
265 void sci_port_deactivate_phy(
266 struct isci_port *iport,
267 struct isci_phy *iphy,
268 bool do_notify_user);
270 bool sci_port_link_detected(
271 struct isci_port *iport,
272 struct isci_phy *iphy);
274 enum sci_status sci_port_link_up(struct isci_port *iport,
275 struct isci_phy *iphy);
276 enum sci_status sci_port_link_down(struct isci_port *iport,
277 struct isci_phy *iphy);
279 struct isci_request;
280 struct isci_remote_device;
281 enum sci_status sci_port_start_io(
282 struct isci_port *iport,
283 struct isci_remote_device *idev,
284 struct isci_request *ireq);
286 enum sci_status sci_port_complete_io(
287 struct isci_port *iport,
288 struct isci_remote_device *idev,
289 struct isci_request *ireq);
291 enum sas_linkrate sci_port_get_max_allowed_speed(
292 struct isci_port *iport);
294 void sci_port_broadcast_change_received(
295 struct isci_port *iport,
296 struct isci_phy *iphy);
298 bool sci_port_is_valid_phy_assignment(
299 struct isci_port *iport,
300 u32 phy_index);
302 void sci_port_get_sas_address(
303 struct isci_port *iport,
304 struct sci_sas_address *sas_address);
306 void sci_port_get_attached_sas_address(
307 struct isci_port *iport,
308 struct sci_sas_address *sas_address);
310 enum isci_status isci_port_get_state(
311 struct isci_port *isci_port);
313 void isci_port_formed(struct asd_sas_phy *);
314 void isci_port_deformed(struct asd_sas_phy *);
316 void isci_port_init(
317 struct isci_port *port,
318 struct isci_host *host,
319 int index);
321 int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
322 struct isci_phy *iphy);
323 #endif /* !defined(_ISCI_PORT_H_) */